The effect of silica nanoparticles on the morphology, mechanical properties and thermal degradation kinetics of PMMA

Comprehensive Review on the Degradation Chemistry and Toxicity Studies of Functional Materials

In recent decades there has been growing interest of material chemists in the successful development of functional materials for drug delivery, tissue engineering, imaging, diagnosis, theranostic, and other biomedical applications with advanced nanotechnology tools. The efficacy and safety of functional materials are determined by their pharmacological, toxicological, and immunogenic effects. It is essential to consider all degradation pathways of functional materials and to assess plausible intermediates and final products for quality control. This review provides a brief insight into chemical degradation mechanisms of functional materials like oxidation, photodegradation, and physical and enzymatic degradation. The intermediates and products of degradation were confirmed with analytical methods such as proton nuclear magnetic resonance (¹H NMR), gel permeation chromatography (GPC), UV-vis spectroscopy (UV-vis), infrared spectroscopy (IR), differential scanning calorimetry (DSC), mass spectroscopy, and other sophisticated analytical methods. These analytical methods are also used for regulatory, quality control, and stability purposes in industry. The assessment of degradation is important to predetermine the behavior of functional materials in specific storage conditions and can be relevant to their behavior during in vivo applications. Another important aspect is the evaluation of the toxicity of functional materials. Toxicity can be accessed with various methods using in vitro, in vivo, ex vivo, and in silico models. In vitro cell culture methods are used to determine mitochondrial damage, reactive oxygen species, stress responses, and cellular toxicity. In vitro cellular toxicity can be measured by MTT assay, LDH leakage assay, and hemolysis. In vivo studies are performed using various animal models involving zebrafish, rodents (mice and rats), and nonhuman primates. Ex vivo studies are also used for efficacy and toxicity determinations of functional materials like ex vivo potency assay and precision-cut liver slice (PCLS) models. The in silico tools with computational simulations like quantitative structure-activity relationships (QSAR), pharmacokinetics (PK) and pharmacodynamics (PD), dose and time response, and quantitative cationic-activity relationships ((Q)CARs) are used for prediction of the toxicity of functional materials. In this review, we studied the principle methods used for degradation studies, different degradation pathways, and mechanisms of functional material degradation with prototype examples. We discuss toxicity assessments with different toxicity approaches used for estimation of the safety and efficacy of functional materials.

Mechanical properties of polymer matrix/glass fiber composites containing metal/hybrid nanoparticles-an overview

Glass fiber reinforced composite has gained attention from various engineering fields because of its enhanced properties. This paper reviewed the mechanical characteristics, such as tensile strength, flexural strength, hardness number, impact strength, wear percentage, etc., of the composites from different experimental studies performed by various researchers over time; by varying with the weight percentage of different metal and non-metal nanoparticles. The main observation was that the mechanical properties remained optimal at a certain quantity of nanoparticles was added beyond which these characteristics began to decrease. When more than one type of nanoparticle is dispersed, or micro rubber particles are added with a specific type of nanoparticle, the properties are more pronounced than when only a single type of particle is used.

Poly(methyl methacrylate) Nanocomposite Foams Reinforced with Carbon and Inorganic Nanoparticles—State-of-the-Art

Polymeric nanocomposite foams have attracted increasing research attention for technical reasons. Poly(methyl methacrylate) is a remarkable and viable thermoplastic polymer. This review highlights some indispensable aspects of poly(methyl methacrylate) nanocomposite foams with nanocarbon nanofillers (carbon nanotube, graphene, etc.) and inorganic nanoparticles (nanoclay, polyhedral oligomeric silsesquioxane, silica, etc.). The design and physical properties of poly(methyl methacrylate) nanocomposite foams have been deliberated. It has been observed that processing strategies, nanofiller dispersion, and interfacial interactions in poly(methyl methacrylate)–nanofiller have been found essential to produce high-performance nanocellular foams. The emergent application areas of the poly(methyl methacrylate) nanocomposite foams are electromagnetic interference shielding, sensors, and supercapacitors.

Epoxidized Block and Statistical Copolymers Reinforced by Organophosphorus-Titanium-Silicon Hybrid Nanoparticles: Morphology and Thermal and Mechanical Properties

Glycidyl methacrylate (GMA) and a mixture of alkyl methacrylates (average chain length of 13 carbons; termed C13MA; derived from vegetable oils) were copolymerized by nitroxide-mediated polymerization to form epoxidized statistical and block copolymers with similar compositions (F GMA ∼0.8), which were further cross-linked by a bio-based diamine. Hybrid plate-like nanoparticles containing organophosphorus-titanium-silicon (PTS) with an average size of ∼130 nm and high decomposition temperature (485 °C) were synthesized via a hydrothermal reaction to serve as additives to simultaneously enhance the thermal and mechanical properties of the blend. Nanocomposites filled with PTS were prepared at different filler-loading levels (0.5, 2, 4 wt %). Transmission electron microscopy (TEM) of the cured block copolymer displayed reaction-induced macrophase-separated domains. TEM also showed an effective dispersion of PTS hybrids in the matrix without intense agglomeration. Thermogravimetric analysis at different heating rates revealed the activation energy of poly (GMA-stat-C13MA) at maximum decomposition increased from 143.5 to 327.2 kJ mol-1 with 4 wt % PTS. Decomposition temperature and char residue improved 12 °C and ∼7 wt %, respectively, and T g increased 12 °C by adding 4 wt % PTS. Targeting various PTS concentrations enabled tuning of the tensile modulus (up to 75%), tensile strength (up to 46%), and storage modulus in both glassy state (up to 59%) and rubbery plateau regions (up to 88%). Oscillatory frequency sweeps indicated that PTS makes the storage modulus frequency dependent, suggesting that the inclusion of the nanoparticles alters the relaxation of the surrounding matrix polymer.

Elucidating the Role of Interfacial Hydrogen Bonds on Glass Transition Temperature Change in a Poly(Vinyl Alcohol)/SiO2 Polymer-Nanocomposite by Noncovalent Interaction Characterization and Atomistic Molecular Dynamics Simulations

A thorough experimental investigation of polymer-glass transition temperature (T_g ) is performed on poly(vinyl alcohol) (PVA) and fumed silica nanoparticle (SiNP) composite. This is done together with atomistic molecular dynamics simulations of PVA systems in contact with bare and fully hydroxylated silica. Experimentally, PVA-SiNP composites are prepared by simple solution casting from aqueous solutions followed by its characterization using Fourier-transform infrared spectroscopy (FTIR), dynamic mechanical analysis (DMA), and dynamic scanning calorimetry (DSC). Both theoretical and experimentally deduced T_g are correlated with the presence of hydrogen bonding interactions involving OH functionality present on the surface of SiNP and along PVA polymer backbone. Further deconvolution of FTIR data show that inter-molecular hydrogen bonding present between PVA and SiNP surface is directly responsible for the increase in T_g . SiNP filler and PVA matrix ratio is also optimized for a desired T_g increase. An optimal loading of SiNP exists, in order to yield the maximum T_g increase arising from the competition between hydrogen bonding and crowding effect of SiNP.

Cross-Linked Polythiomethacrylate Esters Based on Naphthalene-Synthesis, Properties and Reprocessing

Two structurally different aromatic dithioesters were synthesized from two dithiols and methacryloyl chloride. The polymer networks based on methyl methacrylate and/or styrene and the new dimethacrylates were subsequently prepared. The polymerization yields of copolymers were in the range of 95-99%. The thermal and mechanical properties of the copolymers were determined by means of differential scanning calorimetry (DSC), thermogravimetric analysis (TG/DTG), and Shore D hardness. The addition of dithioesters-1,5-NAF-S-Met (or 1,4(1,5)-NAF-CH2S-Met) (from 0.5% to 5%) to MMA- or ST-based polymers results in lowering the glass transition temperature (Tg) by about 8 °C. The thioester-containing polymers based on MMA exhibit lower thermal stability than those with ST. The polythioesters are stable up to 250 °C. The UV/vis spectra and refractive indexes of prepared liquid compositions were also measured. The 1,5-NAF-S-Met (and 1,4(1,5)-NAF-CH2S-Met) improved the refractive index values of ST and MMA compositions. The double bond conversion was also determined for all synthesized materials. The swelling studies of polymers with 20% addition of thioester crosslinkers were investigated. For all polymeric materials with 20% addition of thioesters, depolymerization of the network was carried out by thiol-thioester exchange. The depolymerization products were re-reacted in a thiol-ene reaction with 2-hydroxyethyl methacrylate by thermal initiation. The thiol-ene procedure enabled reprocessing of starting polymers and obtaining new materials characterized by distinctly different thermal, mechanical, and swelling properties. The thiol-ene materials exhibit a lower Shore hardness in the range of 20-50 °Sh, as well as decreased Tg values when compared to starting copolymers. Due to these possible exchange reactions, one can facilely manipulate the properties of the polymers which could lead to the manufacturing of the new products with the desired features. Degradation of the cross-linked structure and recycling of copolymers were also discussed.

Thermal Property Studies of In Situ Blended Graphene/Nature Rubber Nanocomposites

In this work, graphene/nature rubber (GE/NR) composites with filler content from 0 wt% to 1 wt% were prepared by an in situ reduction process. Thermal properties of the nanocomposites were studied by thermogravimetric (TG) analysis and thermogravimetric difference (ΔTG). Composites with higher GE content evidenced stronger thermal stability-enhancing effect. Kinetic analysis showed that the activation energies (Ea) during degradation of composites were always higher than pure NR. However, Ea reached its maximum at 0.1 wt% GE content and started to decrease with further increase in GE loading. The changes in the thermal properties were attributed to the chemical structure and heat transfer properties of graphene sheets.

Preparation and Characterization of Waterborne UV Lacquer Product Modified by Zinc Oxide with Flower Shape

In this paper, the waterborne UV lacquer product (WUV) was used as the main raw material, zinc oxide (ZnO) was used as the additive, and the stearic acid as the surface modifier. According to the method of spraying coating on the surface of poplar wood (Populus tomentosa), a simple and efficient preparation method was carried out to generate a super-hydrophobic surface and enhance the erosion resistance of the coating. By testing, the contact angle (CA) of water on the coating surface can reach 158.4°. The microstructure and chemical composition of the surface of coatings were studied by scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FT-IR), and X-ray diffraction (XRD). The results showed that under acidic conditions, the non-polar long chain alkyl group of stearic acid vapor molecule reacted with the hydroxyl group in acetic acid, the metal ions of the ZnO were displaced to the stearic acid and generated globular zinc stearate (C₃₆H₇₀O₄Zn). The hydrophobic groups –CH₃ were grafted to the surface of zinc stearate (ZnSt2) particles and the micro/nano level of multistage flower zinc stearate coarse structure was successfully constructed on the surface of poplar wood, which endowed it with superhydrophobic properties. It is shown that the coating has good waterproof and erosion resistance.

Preparation and solution properties of polyacrylamide-based silica nanocomposites for drag reduction application

A novel nanocomposite drag reducer showed excellent drag reduction performance by improving strength and rigidity of a polymer structure.

Ionic Liquid-Nanostructured Poly(Methyl Methacrylate)

Here, ionic liquids (ILs) based on imidazolium and ammonium cations were used as modifying agents for poly(methyl methacrylate) (PMMA) by extrusion. The effects of the chemical nature of the cation and/or counter anion on the resulting properties of IL-modified PMMA blends were analyzed. It was found that the use of low amounts of ILs (2 wt.%) improved the thermal stability. A plasticizing effect of ILs is evidenced by a decrease in glass transition temperature Tg of the modified PMMA, allowing to get large strains at break (i.e., up to 280% or 400%) compared to neat PMMA. The deformation and fracture mechanisms of PMMA under uniaxial tensile stress (i.e., crazing) reveal that the presence of IL delayed the strain during the initiation step of crazing.

Preparation and properties of nanocomposites of β-cyclodextrin-functionalized polyacrylamide and its application for enhancing oil recovery

The introduction of nano-SiO₂can significantly improve the performance of β-cyclodextrin-functionalized polyacrylamide in various aspects.

Simultaneous preparation of nano silica and iron oxide from palm oil fuel ash and thermokinetics of template removal

This work reports a method for simultaneous synthesis of nano silica and iron oxide from POFA.

Reinforcement of denture base PMMA with ZrO(2) nanotubes

In the research described, ZrO2 nanotubes were prepared by anodization. The morphologies, crystal structure, etc. were characterised by scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffractometer (XRD), and Fourier transform infrared spectroscopy (FTIR). ZrO2 nanotubes were pre-stirred with the denture base PMMA powder by a mechanical blender and mixed with MMA liquid to fabricate reinforced composites. The composites were tested by an electromechanical universal testing machine to study the influences of contents and surface-treatment effect on the reinforcement. The ZrO2 nanoparticles were also investigated for comparative purposes. Results indicated that ZrO2 nanotubes had a better reinforcement effect than ZrO2 nanoparticles, and surface-treatment would lower the reinforcement effect of the ZrO2 nanotubes which itself was significantly different from that of the ZrO2 nanoparticles. The flexural strength of the composite was maximised when 2.0wt% untreated ZrO2 nanotubes were added.