Toward synergistic reinforced graphene nanoplatelets composite hydrogels with self-healing and multi-stimuli responses

Soy Protein-Based Wound Dressings: A Review of Their Preparation, Properties, and Perspectives

Wound healing is a major challenge worldwide, and people have been researching wound dressings that can promote wound healing for decades. Natural biobased materials, such as polysaccharides and proteins, have been widely used in the development of wound dressings. Among them, soy protein-based materials have attracted the interest of a wide range of researchers due to their safety, biocompatibility, controlled degradation, and ability to be mixed with other materials. However, there has been a lack of comments on these soy protein-based wound dressings. This work reviews various forms of soy protein-based wound dressings, such as hydrogels, films, and others, which could be prepared through physical/chemical cross-linking with synthetic or natural polymers. The important role played by soy protein-based materials in the wound healing phase and their properties will be examined, such as their anti-inflammatory, antioxidant, angiogenesis-promoting, cellular biocompatibility, self-healing ability, adhesion, antimicrobial, and tunable mechanical properties. Additionally, insights into the market prospects and trends for soy protein dressings are provided, clarifying the enormous development potential of soy protein as a new type of wound repair material.

Bamboo fiber reinforced poly (acrylonitrile-styrene-acrylic)/chlorinated polyethylene via compabilization

In the quest to enhance the performance of natural fiber-reinforced polymer composites, achieving optimal dispersion of fiber materials within a polymeric matrix has been identified as a key strategy. Traditional approaches, such as the surface modification of natural fibers, often necessitate the use of additional synthetic chemical processes, presenting a significant challenge. In this work, taking poly (acrylonitrile-styrene-acrylic) (ASA) and bamboo fiber (BF) as a model system, we attempt to use the elastomer-chlorinated polyethylene (CPE) as a compatibilizer to tailor the mechanical properties of ASA/CPE/BF ternary composites. It was found that increasing CPE content contributed to more remarkable reinforcing efficiency, where composite with 15 phr CPE exhibited a nearly four-fold increase in reinforcing efficiency of tensile strength (20 %) compared with that of composite system without CPE (4.1 %). Such improvement was ascribed to the compatibilizing effect exerted by CPE, which prevented the aggregation of BF within polymeric matrix. Surface properties suggested the stronger interface between CPE and BF compared to that between ASA and BF and thereby contributed to the compabilizing effect. Since no chemical process was involved, it is suggested that the introduction of elastomer to be a universal, green and sustainable approach to achieve the reinforcement.

Linear Polyethyleneimine-Based and Metal Organic Frameworks (DUT-67) Composite Hydrogels as Efficient Sorbents for the Removal of Methyl Orange, Copper Ions, and Penicillin V

This research explores the integration of DUT-67 metal organic frameworks into polyethyleneimine-based hydrogels to assemble a composite system with enough mechanical strength, pore structure and chemical affinity to work as a sorbent for water remediation. By varying the solvent-to-modulator ratio in a water-based synthesis path, the particle size of DUT-67 was successfully modulated from 1 μm to 200 nm. Once DUT-67 particles were integrated into the polymeric hydrogel, the composite hydrogel exhibited enhanced mechanical properties after the incorporation of the MOF filler. XPS, NMR, TGA, FTIR, and FT Raman studies confirmed the presence and interaction of the DUT-67 particles with the polymeric chains within the hydrogel network. Adsorption studies of methyl orange, copper(II) ions, and penicillin V on the composite hydrogel revealed a rapid adsorption kinetics and monolayer adsorption according to the Langmuir's model. The composite hydrogel demonstrated higher adsorption capacities, as compared to the pristine hydrogel, showcasing a synergistic effect, with maximum adsorption capacities of 473 ± 21 mg L-1, 86 ± 6 mg L-1, and 127 ± 4 mg L-1, for methyl orange, copper(II) ions, and penicillin V, respectively. This study highlights the potential of MOF-based composite hydrogels as efficient adsorbents for environmental pollutants and pharmaceuticals.

Stretchable and sensitive sodium alginate ionic hydrogel fibers for flexible strain sensors

Ionic conductive hydrogel fibers based on natural polymers provide an immense focus for a new generation of electronics due to their flexibility and knittability. The feasibility of utilizing pure natural polymer-based hydrogel fibers could be drastically improved if their mechanical and transparent performances satisfy the requirements of actual practice. Herein, we report a facile fabrication strategy for significantly stretchable and sensitive sodium alginate ionic hydrogel fibers (SAIFs), by glycerol initiating physical crosslinking and by CaCl2 inducing ionic crosslinking. The obtained ionic hydrogel fibers not only show significant stretchability (tensile strength of 1.55 MPa and fracture strain of ∼161 %), but also exhibit wide-range sensing, satisfactorily stable, rapidly responsive, and multiply sensitive abilities to external stimulus. In addition, the ionic hydrogel fibers have excellent transparency (over 90 % in a wide wavelength range), and good anti-evaporation and anti-freezing properties. Furthermore, the SAIFs have been easily knitted into a textile, and successfully applied as wearable sensors to recognize human motions, by observing the output electrical signals. Our methodology for fabrication intelligent SAIFs will shed light on artificial flexible electronics and other textile-based strain sensors.

Stretchable and transparent alginate ionic gel film for multifunctional sensors and devices

Flexible and stretchable substrates based on pure natural polymers have attracted widespread attention for next-generation "green" electronics. However, fabrication of stretchable and "green" electronic sensors with integrated high stretchability, optical transmittance and good conductivity still remains tremendous challenges. Herein, alginate ionic gel films (AIGFs) with integrated high stretchability (tensile strength of 4.13 MPa and 191.1 % fracture strain) and excellent transparent properties (transparency of ∼92 %) are achieved by the glycerol inducing physical crosslinking and CaCl2 initiating ionic crosslinking, a simple soaking and drying strategy. The obtained gel films not only exhibit good ionic conductivity, but also high reliability, wide-range sensing, and multiple sensitivity to external stimulus. More importantly, these ionic conductive gel films as green substrates are successfully utilized for construction of flexible and patterned optoelectronic devices. This promising strategy will open up new powerful routes to construct highly stretchable, transparent, and ionic conductive substrates for multifunctional sensors and devices.

Photothermal nanohybrid hydrogels for biomedical applications

In the past decades, diseases such as wound infection, cancer, bone defect and osteoarthritis have constantly threatened the public health. However, the traditional treatment has many insufficiencies, such as high cost, easy recurrence and high biological toxicity. Hydrogel is a material with three-dimensional network structure, which has a series of advantages, such as injectability, self-heal ability, easy loading and controllability of drug release, and excellent biocompatibility. Therefore, it is extensively used in drug delivery, antibacterial, anti-cancer and other fields. However, the traditional hydrogels have the single performance, and therapeutic efficacy is often rely on the drugs loaded on them to cure diseases, which cannot achieve sustainable therapeutic effect. In order to solve this problem, photothermal nano hydrogel with photothermal agent (PTA) has become an ideal material due to its excellent physical and chemical properties. Photothermal nano hydrogels used in photothermal therapy (PTT) can exploit the photothermal effect of photothermal agent to increase local temperature and control the sol-gel phase transition behavior of hydrogels, so they are widely used in drug release, photothermal sterilization, photothermal inhibition of cancer cells and enhancement of bone repair. To sum up, this paper introduces the preparation of hydrogels with photothermal nanomaterials, and discusses their applications in the fields of drug release, photothermal sterilization, photothermal cancer cell inhibition and enhanced bone repair.