Impact of solid carriers and spray drying on pre/post-compression properties, dissolution rate and bioavailability of solid self-nanoemulsifying drug delivery system loaded with simvastatin

Fisetin as a chemoprotective and chemotherapeutic agent: mechanistic insights and future directions in cancer therapy

Cancer remains a leading cause of mortality globally, characterized by the uncontrolled proliferation of abnormal cells, invasion of healthy tissues, and potential metastasis. Natural compounds have become a focus in cancer research due to their potential therapeutic roles. Among these, fisetin, a dietary flavonoid, demonstrates notable anti-cancer properties through various molecular mechanisms. This review evaluates the chemoprotective and chemotherapeutic potential of fisetin, focusing on its mechanisms of action against cancer and its capacity to enhance cancer treatment. A systematic literature search was conducted across PubMed, Web of Science, and Scopus databases using keywords related to fisetin and cancer. The review synthesizes findings from in vitro and in vivo studies examining fisetin's effects on signaling pathways, apoptosis induction, oxidative stress modulation, and synergistic potential with chemotherapeutic agents. Fisetin has shown the ability to suppress tumor growth and metastasis by modulating critical signaling pathways, including PI3K/Akt/mTOR, NF-κB, and MAPK. It induces apoptosis in cancer cells through mitochondrial and endoplasmic reticulum stress responses and demonstrates antioxidative properties by reducing reactive oxygen species. Additionally, fisetin enhances the efficacy of conventional chemotherapies, indicating its role as a potential adjuvant in cancer treatment. Fisetin presents a promising natural compound with diverse anti-cancer effects, impacting cell cycle arrest, apoptosis, and oxidative stress pathways. Further clinical studies are warranted to fully elucidate its therapeutic potential and to optimize its delivery for improved bioavailability in cancer patients.

Enhancing the oral bioavailability of fisetin: polysaccharide-based self nano-emulsifying spheroids for colon-targeted delivery

Fisetin (FS) is a flavonoid that possesses antioxidant and anti-inflammatory properties against ulcerative colitis. FS shows poor dissolution rate and permeability. An attempt has been made to develop colon-targeted solid self-nanoemulsifying drug delivery systems (S-SNEDDS) of FS. Initially, liquid (L) SNEDDS were prepared by loading FS into isotropic mixture of L-SNEDDS was prepared using Labrafil M 1944 CS, Transcutol P, and Tween 80. These L-SNEDDS were further converted into solid (S) SNEDDS by mixing the isotropic mixture with 1:1:1 ratio of guar gum (GG), xanthan gum (XG) and pectin (PC) [GG:XG:PC (1:1:1)]. Aerosil-200 (A-200) was added to enhance their flow characteristics. Further, they were converted into spheroids by extrusion-spheronization technique. The solid-state characterization of S-SNEDDS was done by SEM, DSC, and PXRD, which revealed that the crystalline form of FS was converted into the amorphous form. In the dissolution study, S-SNEDDS spheroids [GG:XG:PC (1:1:1)] exhibited less than 20% drug release within the first 5 h, followed by rapid release of the drug between the 5th and 10th h, indicating its release at colonic site. The site-specific delivery of FS to colon via FS-S-SNEDDS spheroids was confirmed by conducting pharmacokinetic studies on rats. Wherein, results showed delay in absorption of FS loaded in spheroids up to 5 h and achievement of Cmax at 7h, whereas L-SNEDDS showed rapid absorption of FS. Furthermore, FS-L-SNEDDS and FS-S-SNEDDS spheroids [GG:XG:PC (1:1:1)] increased oral bioavailability of FS by 6.86-fold and 4.44-fold, respectively, as compared to unprocessed FS.

Rational Design and Development of a Soluble Mesoporous Carrier for the Solidification of a Preconcentrated Self-Nanoemulsion Formulation

The solidification of self-preconcentrated nanoemulsion without changes in nanodroplet formation gains particular consideration due to the interaction between solidified carriers. This work aimed to develop mannitol mesoporous as a soluble carrier for supersaturated self-nanoemulsion (SSNE) using a design of experiment (DoE) approach. The mesoporous carrier was prepared by a spray-drying technique. The type of templating agent (TA) used to form a porous system, the amount of TA, and solid loading in the spray-drying process were studied. Several characterizations were performed for mannitol mesoporous formation, namely, powder X-ray diffraction, thermal analysis, scanning electron microscopy, and surface area analyzer. Solidification of SSNE incorporated into the mesoporous mannitol was carried out, followed by compaction behavior, flowability, and nanodroplet formation. The results revealed several process parameters for preparing the mesoporous mannitol, notably TA, which gained more significant consideration. Solid loading in the mesoporous preparation system reduced the surface area and pore size and did not affect solid SSNE flowability. The amount of TA increased the pore size and volume dramatically as well as the compactibility and flowability. Ammonium carbonate was the preferable TA for preparing the mesoporous carrier, particularly for the nanodroplet formulation process. In addition, synergistic and antagonistic interactions between factors were also observed. The optimized mesoporous carrier was applied for solidification, and there was no difference between SSNE and solid SSNE in the performance of nanodroplet formation.

Development of Simvastatin-Loaded Particles Using Spray Drying Method for Ex Tempore Preparation of Cartridges for 2D Printing Technology

In this work, a spray drying method was developed to produce drug/polymer (simvastatin/polycaprolactone) microparticles that have the potential to be used as a pre-formulation for ex tempore preparation of 2D printing cartridges. An experimental model was designed with the process parameters set to predict the smallest particle size required for successful 2D printing. Three different types of particles (lactose, nanocellulose/lactose, calcium silicate) were produced, and the average size of the dry particles varied depending on the sampling location (cyclone, collection vessel). The encapsulation efficiency of simvastatin was highest with nanocellulose/lactose from the collection vessel. The one-month stability of simvastatin in the particles showed low content, but the addition of ascorbic acid as an antioxidant increased the chemical stability of the drug. Interestingly, the addition of antioxidants decreased the stability of simvastatin in the calcium silicate particles from the collection vessel. Dispersion of the particles in three different propylene glycol and water mixtures (10/90, 50/50, and 90/10% (v/v)), representing a printable ink medium with three different viscosity and surface tension properties, showed that nanocellulose/lactose was the most suitable antiadhesive in terms of dispersed particle size (˂1 µm). After one month of storage, the dispersed particles remained in the same size range without undesirable particle agglomeration.

Recent Advances in Improving the Bioavailability of Hydrophobic/Lipophilic Drugs and Their Delivery via Self-Emulsifying Formulations

Formulations based on emulsions for enhancing hydrophobic and lipophilic drug delivery and its bioavailability have attracted a lot of interest. As potential therapeutic agents, they are integrated with inert oils, emulsions, surfactant solubility, liposomes, etc.; drug delivering systems that use emulsion formations have emerged as a unique and commercially achievable accession to override the issue of less oral bioavailability in connection with hydrophobic and lipophilic drugs. As an ideal isotropic oil mixture of surfactants and co-solvents, it self-emulsifies and forms fine oil in water emulsions when acquainted with aqueous material. As droplets rapidly pass through the stomach, fine oil promotes the vast spread of the drug all over the GI (gastrointestinal tract) and conquers the slow disintegration commonly seen in solid drug forms. The current status of advancement in technologies for drug carrying has promulgated the expansion of innovative drug carriers for the controlled release of self-emulsifying pellets, tablets, capsules, microspheres, etc., which got a boost for drug delivery usage with self-emulsification. The present review article includes various kinds of formulations based on the size of particles and excipients utilized in emulsion formation for drug delivery mechanisms and the increase in the bioavailability of lipophilic/hydrophobic drugs in the present time.

Chitosan modified 5-fluorouracil nanostructured lipid carriers for treatment of diabetic retinopathy in rats: A new dimension to an anticancer drug

Diabetic retinopathy (DR) is one of the chronic complications of diabetes. It includes retinal blood vessels' damage. If untreated, it leads to loss of vision. The existing treatment strategies for DR are expensive, invasive, and need expertise during administration. Hence, there is a need to develop a non-invasive topical formulation that can penetrate deep to the posterior segment of retina and treat the damaged retinal vessels. In addition, it should also provide sustained release. In recent years, novel drug delivery systems (NDDS) have been explored for treating DR and found successful. In this study, chitosan (CS) modified 5-Fluorouracil Nanostructured Lipid Carriers (CS-5-FU-NLCs) were prepared by modified melt emulsification-ultrasonication method and optimized by Box-Behnken Design. The size, polydispersity index, zeta potential and entrapment efficiency of CS-5-FU-NLCs were 163.2 ± 2.3 nm, 0.28 ± 1.52, 21.4 ± 0.5 mV and 85.0 ± 0.2 %, respectively. The in vitro drug release and ex vivo permeation study confirmed higher and sustained drug release in CS-5-FU-NLCs as compared to 5-FU solution. HET-CAM Model ensured the non-irritant nature of CS-5-FU-NLCs. In vivo ocular studies of CS-5-FU-NLCs confirmed antiangiogenic effect of 5-FU by CAM model and diabetic retinopathy induced rat model, indicating successful delivery of 5-FU to the retina.

Quality by Design Based Formulation of Xanthohumol Loaded Solid Lipid Nanoparticles with Improved Bioavailability and Anticancer Effect against PC-3 Cells

Many natural products with greater therapeutic efficacy are limited to target several chronic diseases such as cancer, diabetes, and neurodegenerative diseases. Among the natural products from hops, i.e., Xanthohumol (XH), is a prenylated chalcone. The present research work focuses on the enhancement of the poor oral bioavailability and weak pharmacokinetic profile of XH. We exemplified the development of a Xanthohumol-loaded solid lipid nanoparticles (XH-SLNs) cargo system to overcome the limitations associated with its bioavailability. The XH-SLNs were prepared by a high-shear homogenization/ultrasonication method and graphical, numerical optimization was performed by using Box-Behnken Design. Optimized XH-SLNs showed PS (108.60 nm), PDI (0.22), ZP (-12.70 mV), %EE (80.20%) and an amorphous nature that was confirmed by DSC and PXRD. FE-SEM and HRTEM revealed the spherical morphology of XH-SLNs. The results of release studies were found to be 9.40% in 12 h for naive XH, whereas only 28.42% of XH was released from XH-SLNs. The slow release of drugs may be due to immobilization of XH in the lipid matrix. In vivo pharmacokinetic study was performed for the developed XH-SLNs to verify the enhancement in the bioavailability of XH than naive XH. The enhancement in the bioavailability of the XH was confirmed from an increase in Cmax (1.07-folds), AUC0-t (4.70-folds), t1/2 (6.47-folds) and MRT (6.13-folds) after loading into SLNs. The relative bioavailability of XH loaded in SLNs and naive XH was found to be 4791% and 20.80%, respectively. The cytotoxicity study of naive XH, XH-SLNs were performed using PC-3 cell lines by taking camptothecin as positive control. The results of cytotoxicity study revealed that XH-SLNs showed good cell inhibition in a sustained pattern. This work successfully demonstrated formulation of XH-SLNs with sustained release profile and improved oral bioavailability of XH with good anticancer properties against PC-3 cells.

Multivariate Data Analysis and Central Composite Design-Oriented Optimization of Solid Carriers for Formulation of Curcumin-Loaded Solid SNEDDS: Dissolution and Bioavailability Assessment

The study was initiated with two major purposes: investigating the role of isomalt (GIQ9) as a pharmaceutical carrier for solid self-nanoemulsifying drug delivery systems (S-SNEDDSs) and improving the oral bioavailability of lipophilic curcumin (CUN). GIQ9 has never been explored for solidification of liquid lipid-based nanoparticles such as a liquid isotropic mixture of a SNEDDS containing oil, surfactant and co-surfactant. The suitability of GIQ9 as a carrier was assessed by calculating the loading factor, flow and micromeritic properties. The S-SNEDDSs were prepared by surface adsorption technique. The formulation variables were optimized using central composite design (CCD). The optimized S-SNEDDS was evaluated for differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), microscopy, dissolution and pharmacokinetic studies. The S-SNEDDS showed a particle size, zeta potential and PDI of 97 nm, -26.8 mV and 0.354, respectively. The results of DSC, XRD, FTIR and microscopic studies revealed that the isotropic mixture was adsorbed onto the solid carrier. The L-SNEDDS and S-SNEDDS showed no significant difference in drug release, indicating no change upon solidification. The optimized S-SNEDDS showed 5.1-fold and 61.7-fold enhancement in dissolution rate and oral bioavailability as compared to the naïve curcumin. The overall outcomes of the study indicated the suitability of GIQ9 as a solid carrier for SNEDDSs.

Quality by design-based optimization of formulation and process parameters for berberine nanosuspension for enhancing its dissolution rate, bioavailability, and cardioprotective activity

Berberine (BER) possesses dissolution rate limited oral bioavailability. The present study deciphers the formulation of nanosuspension loaded with BER for enhancing its cardioprotective potential. The nanosuspension was prepared by a liquid antisolvent precipitation technique using sodium lauryl sulfate as a surfactant and polyvinyl pyrrolidone K30 (PVP K30) as a polymer. The optimized formulation showed a particle size of 251.32 ± 4.18 nm, zeta potential of -24.10 ± 1.16 mV, and drug loading capacity of 98.22 ± 2.24%. The results showed about 6.01-fold and 3.54-fold enhancement in the dissolution rate and permeability, respectively, upon loading berberine into nanosuspension. About 8.44-fold increase in C_max , 27.22-fold increase in AUC_0-t , and 27.38-fold increase in AUC_0-∞ were observed in the case of BER nanosuspension, compared to its naïve form. The results of particle size, zeta potential, and drug loading showed a nonsignificant change in the response of fresh and aged nanosuspension, which indicated that the formulation was stable. In vitro results on H9C2 cell line indicated a lower cellular proliferation rate after treatment with BER nanosuspension with decreased cytoplasmic expression of angiotensin converting enzyme (ACE) protein. Overall, the results indicated the successful development of BER nanosuspension with an enhanced dissolution rate, permeability, bioavailability, and cardioprotective activity. Practical applications The present study provides the evidence that the formulation of nanosuspension loaded with berberine enhance the cardioprotective activity of berberine. The results of the study supports the improved bioavailability of nanosuspension of berberine showed enhanced cardioprotective activity.

Expanding arsenal against diabetes mellitus through nanoformulations loaded with glimepiride and simvastatin: A comparative study

Type 2 diabetes mellitus is one of the most common and life-threatening diseases found across the globe. It occurs due to insulin resistance (IR). Major causes of IR include obesity, sedentary life style and hyperlipidemia. Glimepiride (GLM) is one of the most common oral sulphonyl ureas that is being used to treat diabetes and Simvastatin (SIM) is one of the most common statins that is used to treat hyperlipidaemia. However, both the drugs suffer from dissolution rate limited oral bioavailability. Hence, the aim of present study was to develop two different nanoformulations viz. nanosuspension and self-nanoemulsifying drug delivery systems (SNEDDS) and evaluate their potential in treating type 2 diabetes mellitus on streptozotocin (STZ) induced rats. In the present study two such drugs, GLM and SIM were co-formulated into nanosuspension (NS) as well as self-nanoemulsifying drug delivery systems (L-SNEDDS). Both formulations were spray dried for solidification and evaluated for their antidiabetic potential against high fat diet and streptozotocin induced rat model. The study showed significant (p < 0.05) decrease in lipid/cholesterol and blood glucose levels and significant increase in antioxidant levels in the rats treated with NS and SNEDDS containing the drugs alone as well as their combination as compared to their unprocessed forms. However, the efficacy was more prominent in case of combination possibly due to dual benefits i.e., decrease in IR due to statin and control of blood glucose level. Among NS and SNEDDS, NS was found more efficacious than that of the SNEDDS possibly due to higher enhancement of oral bioavailability in case of NS.

Improved neuroprotective activity of Fisetin through SNEDDS in ameliorating the behavioral alterations produced in rotenone-induced Parkinson's model

Fisetin is a polyphenolic flavonoid reported to have antioxidant, anti-inflammatory, and anti-cancer activities. However, it loses its importance as an effective phytochemical due to its poor water solubility and lower bioavailability. In the present study, the self-nanoemulsifying drug delivery system (SNEDDS) of fisetin was developed in order to improve its pharmacological activity. The developed SNEDDS of fisetin was evaluated for improving the rotenone-induced behavioral changes in the rats, and its efficacy was compared with naïve fisetin. It was noticed that fisetin loaded in the SNEDDS formulation significantly (p < 0.001) ameliorated the rotenone-induced alteration in the body weight, grip strength, beam walk, postural instability, etc., in rats when compared to the effect of naïve fisetin. Naïve fisetin significantly (p < 0.05) ameliorated the effect of rotenone on the level of dopamine only at a higher dose. Whereas, SNEDDS of fisetin produced a significant (p < 0.05) effect at both dose levels when compared with the diseased group as well as also produced a significant (p < 0.05) effect when compared with the naïve fisetin group. The results of histopathological examination revealed about the neuroprotective effect of SNEDDS loaded with fisetin as observed through the protection of neuronal damage. From this study, it was concluded that SNEDDS improved the anti-Parkinsonian activity of fisetin by improving the behavioral alteration produced by rotenone due to enhancement in its solubility and bioavailability.

Development and optimization of oral nanoemulsion of rutin for enhancing its dissolution rate, permeability, and oral bioavailability

Rutin-loaded nanoemulsion (NE-RU) formulation is the core research work in this report. Labrafil^® M 1944 CS was used as the oil phase, Tween 80 as the surfactant, and Transcutol P as the co-surfactant in the preparation of nanoemulsion. By utilizing a three-level central composite design (CCD), the composition was optimized. The optimized formulation showed a droplet size of 98.53 ± 3.22 nm, zeta potential -46.70 ± 4.78 mV, and drug loading 92.34 ± 3.87%. The results of dissolution, permeability, and oral bioavailability showed about 25.55 folds, 1.98 folds, and 33.68 folds, respectively, in the case of NE-RU as compared to its naïve form. The response of fresh and aged NE was non-significantly different in terms of particle size, zeta potential, and drug loading, indicating that the formulation was stable. The successful development of NE-RU with an improved bioavailability profile suggested that this formulation might be used to examine the pharmacodynamics of oxidative stress-related metabolic disorders.

Self-nanoemulsifying composition containing curcumin, quercetin, Ganoderma lucidum extract powder and probiotics for effective treatment of type 2 diabetes mellitus in streptozotocin induced rats

Liquid self-nanoemulsifying drug delivery system (L-SNEDDS) of curcumin and quercetin were prepared by dissolving them in isotropic mixture of Labrafil M1944CS®, Capmul MCM®, Tween-80® and Transcutol P®. The prepared L-SNEDDS were solidified using Ganoderma lucidum extract, probiotics and Aerosil-200® using spray drying. These were further converted into pellets using extrusion-spheronization. The mean droplet size and zeta potential of L-SNEDDS were found to be 63.46 ± 2.12 nm and - 14.8 ± 3.11 mV while for solid SNEDDS pellets, these were 72.46 ± 2.16 nm and -38.7 ± 1.34 mV, respectively. The dissolution rate for curcumin and quercetin each was enhanced by 4.5 folds while permeability was enhanced by 5.28 folds (curcumin) and 3.35 folds (quercetin) when loaded into SNEDDS pellets. The Cmax for curcumin and quercetin containing SNEDDS pellets was found 532.34 ± 5.64 ng/mL and 4280 ± 65.67 ng/mL, respectively. This was 17.55 and 3.48 folds higher as compared to their naïve forms. About 50.23- and 5.57-folds increase in bioavailability was observed for curcumin and quercetin respectively, upon loading into SNEDDS pellets. SNEDDS pellets were found stable at accelerated storage conditions. The developed formulation was able to normalize the levels of blood glucose, lipids, antioxidant biomarkers, and tissue architecture of pancreas and liver in streptozotocin induced diabetic rats as compared to their naïve forms.

Development of mushroom polysaccharide and probiotics based solid self-nanoemulsifying drug delivery system loaded with curcumin and quercetin to improve their dissolution rate and permeability: State of the art

The role of mushroom polysaccharides and probiotics as pharmaceutical excipients for development of nanocarriers has never been explored. In the present study an attempt has been made to explore Ganoderma lucidum extract powder (GLEP) containing polysaccharides and probiotics to convert liquid self nanoemulsifying drug delivery system (SNEDDS) into solid free flowing powder. Two lipophilic drugs, curcumin and quercetin were used in this study due to their dissolution rate limited oral bioavailability and poor permeability. These were loaded into liquid SNEDDS by dissolving them into isotropic mixture of Labrafill M1944CS, Capmul MCM, Tween-80 and Transcutol P. The liquid SNEDDS were solidified using probiotics and mushroom polysaccharides as carriers and Aerosil-200 as coating agent. The solidification was carried out using spray drying process. The process and formulation variables for spray drying process of liquid SNEDDS were optimized using Box Behnken Design to attain required powder properties. The release of both drugs from the optimized spray dried (SD) formulation was found to be more than 90%, whereas, it was less than 20% for unprocessed drugs. The results of DSC, PXRD and SEM, showed that the developed L-SNEDDS preconcentrate was successfully loaded onto the porous surface of probiotics, mushroom polysaccharides and Aerosil-200.

A comprehensive study of the basic formulation of supersaturated self-nanoemulsifying drug delivery systems (SNEDDS) of albendazolum

Albendazolum (ABZ) is a BCS class II drug. It has challenging biopharmaceutical properties, which include poor solubility and dissolution rate. These properties have laid the ground for developing a supersaturated self-nanoemulsifying drug delivery system (S-SNEDDS) to form oil-in-water nanoemulsion in situ to improve the oral bioavailability of ABZ. Based on the ABZ solubility, emulsifying ability, and stability after dispersion in an aqueous phase, an optimal self-nanoemulsifying drug delivery system (SNEDDS) consisting of oleic acid, Tween^® 20, and PEG 600 (X:Y:Z, w/w) was identified, having 10% (w/w) hydroxypropyl methylcellulose (HPMC) E15 lv as its precipitation inhibitor. The optimized system possessed a small mean globule size value (89.2 nm), good dispersion properties (polydispersity index (PDI): 0.278), and preserved the supersaturated state of ABZ. S-SNEDDS was transformed into solid supersaturated self-nanoemulsifying drug delivery systems (SS-SNEDDS) using microcrystalline cellulose as a solid material. The developed S-SNEDDS were characterized for globule size, pH, turbidity, differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and flow properties. The data obtained from the results suggest that this S-SNEDDS formulation can enhance the solubility and oral bioavailability of ABZ for appropriate clinical application.

Exploring role of polysaccharides present in Ganoderma lucidium extract powder and probiotics as solid carriers in development of liquisolid formulation loaded with quercetin: A novel study

Ganoderma lucidium extract powder (GLEP) contains various polysaccharides which are well known for their antioxidant and anti-inflammatory actions. Probiotics (PB) are well-established for providing a plethora of health benefits. Hence, use of mushroom polysaccharides and probiotics as carriers to solidify liquisolid formulation is anticipated to function as functional excipients i.e. as adsorbent that may provide therapeutic benefits. Quercetin (QUR) has been used as model lipophilic drug in this study. QUR loaded liquisolid compacts (LSCs) were formulated using Tween 80 as solvent. These were further solidified using a combination of PB and GLEP as carriers. Aerosil-200 (A-200) was used as coating agent. The formulation exhibited very good flow characteristics. Dissolution rate of raw QUR was found to be less than 10% in 60 min while in case of QUR loaded LSCs, more than 90% drug release was observed within 5 min. Absence of crystalline peaks of QUR in the DSC and PXRD reports of LSCs and their porous appearance in SEM micrographs indicate that QUR was successfully incorporated in the LSCs. The developed formulation was found to be stable on storage under accelerated stability conditions.

Optimization of self-emulsifying drug delivery system of cefuroxime axetil

Abstract Overcoming solubility problems is the greatest challenge during formulation of poorly soluble active pharmaceutical ingredients (API’s) into oral solid dosage forms. Different formulation approaches were used to surpass this problem and enhance their solubility in the gastrointestinal (GI) fluids, in order to achieve a faster dissolution and better absorption, which will directly influence their therapeutic effect. In this paper, an evaluation of the potential of a self-emulsifying drug delivery system (SEDDS) to improve the solubility of the active ingredient cefuroxime axetil (CA) was done. Screening of the solubility of the API in different excipients was done, and Tween 80, PEG 400, and Olive oil as a surfactant, co-solvent, and oil, respectively, were chosen as the most convenient system constituents. An optimal self-emulsification and solubilization ability of this system was assessed using mixture experimental design statistical tools based on the response surface methodology (RSM). The prepared CA-SEDDS were evaluated for droplet size (d10, d50, d90 in µm), droplet size distribution (Span factor), and absorbance. As a complementary approach, for better representation of the non-linear relationship between the formulation compositions and the observed dispersion characteristics an artificial neural network (ANN) was used. Optimal formulation that consists of 10% (w/w) Tween 80 as surfactant, 80% (w/w) PEG 400 as co-solvent and 10% (w/w) Olive oil, was obtained. Both, mixture experimental design and ANN were combined for a comprehensive evaluation of CA-SEDDS and the obtained results suggested that formulation of SEDDS is a useful approach for improving the solubility of the CA. Keywords: self-emulsifying drug delivery systems (SEDDS), cefuroxime axetil, design of experiment, artificial neural network (ANN)

Spray drying as an advantageous strategy for enhancing pharmaceuticals bioavailability

Spray drying is an efficient technique that is used not only for rapid evaporation of the solvent from different systems but also for designing ultra-fine particles with various desirable characteristics. The obtained powders demonstrate reasonably narrow size distribution with a submicron-to-micron size range. It is one of the recent techniques applied to present acceptable solutions to enhance the absorption and bioavailability of some challenging drugs. In view of that, the purpose of this review is to shed some light on the wide variety of the recently developed fine particulate products that can be produced from spray-drying technique. This article reports the most outstanding advantages and challenges that could be overcome by exploiting the spray-drying technique for the production of different pharmaceuticals, including pure drug particles and drug-loaded polymeric carriers. The potential of this technique, whether used alone or in combination with other methods, in order to develop reproducible and scalable procedures for the best translation of bench-to-bedside innovation of pharmaceutical products is hereby discussed.

Preparation, Physicochemical Characterisation and DoE Optimisation of a Spray-Dried Dry Emulsion Platform for Delivery of a Poorly Soluble Drug, Simvastatin

In the presented study, insight into the development and optimisation of the dry emulsion formulation and spray drying process is provided. The aim was to facilitate the dissolution of the poorly soluble, highly lipophilic drug, simvastatin, by forming spray-dried dry emulsion particles having adequate powder flow properties, while assuring sufficient drug content. Simvastatin and a mixture of caprylic, capric triglyceride and 1-oleoyl-rac-glycerol were employed as a model drug and solubilising oils, respectively. A matrix of the dry emulsions was composed at a fixed ratio mixture of mannitol and HPMC. Tween 20 was used in low amounts as the primary emulsion stabiliser. To facilitate process optimisation, a DoE surface response design was used to study the influence of formulation and process parameters on the particle size distribution, powder bulk properties, emulsion reconstitution ability, drug stability and process yield of spray-dried products. Two-fluid nozzle geometry was identified, studied and confirmed to be important for most product critical quality attributes. Models obtained after the study showed acceptable coefficients of determination and provided good insight in the relationship governing the process and product characteristics. Five model optimised products showed adequate process yield, suitable particle size distribution, good reconstitution ability and improved dissolution profile, when compared to a non-lipid-based tablet and the pure drug. However, the obtained dry emulsion powders exhibited poor flow character according to the Carr index. The optimised product was further analysed with NMR during lipolysis to gain insight into the species formed during digestion and the kinetics of their formation.

Self-Microemulsifying Drug Delivery System of Phillygenin: Formulation Development, Characterization and Pharmacokinetic Evaluation

Phillygenin, as an active ingredient of Forsythia suspensa, possesses a wide range of biological and pharmacological activity. However, its development and application are restricted due to its poor bioavailability and low solubility. Our work aimed to develop a self-microemulsifying drug delivery system to improve the oral bioavailability of phillygenin. The composition of the self-microemulsifying drug delivery system was preliminary screened by the pseudo-ternary phase diagram. Subsequently, the central composite design method was employed to optimize the prescription of the self-microemulsifying drug delivery system loaded with phillygenin. The prepared self-microemulsifying drug delivery system of phillygenin was characterized in terms of morphology, droplet size distribution, polydispersity index and stability. Then, the in vitro dissolution and the oral bioavailability were analyzed. The optimized self-microemulsifying drug delivery system of phillygenin consisted of 27.8% Labrafil M1944CS, 33.6% Cremophor EL, 38.6% polyethylene glycol 400 (PEG-400) and 10.2 mg/g phillygenin loading. The prepared self-microemulsifying drug delivery system of phillygenin exhibited spherical and uniform droplets with small size (40.11 ± 0.74 nm) and satisfactory stability. The in vitro dissolution experiment indicated that the cumulative dissolution rate of the self-microemulsifying drug delivery system of phillygenin was significantly better than that of free phillygenin. Furthermore, after oral administration in rats, the bioavailability of phillygenin was significantly enhanced by the self-microemulsifying drug delivery system. The relative bioavailability of the self-microemulsifying drug delivery system of phillygenin was 588.7% compared to the phillygenin suspension. These findings suggest that the self-microemulsifying drug delivery system of phillygenin can be a promising oral drug delivery system to improve the absorption of phillygenin.