Removal of phenol and β-naphthol from aqueous solution by decorated graphene oxide with magnetic iron for modified polyrhodanine as nanocomposite adsorbents: Kinetic, equilibrium and thermodynamic studies

Adsorption Behaviors and Mechanism of Phenol and Catechol in Wastewater by Magnetic Graphene Oxides: A Comprehensive Study Based on Adsorption Experiments, Mathematical Models, and Molecular Simulations

This study provides a comprehensive analysis of the adsorption behaviors and mechanisms of phenol and catechol on magnetic graphene oxide (MGO) nanocomposites based on adsorption experiments, mathematical models, and molecular simulations. Through systematic experiments, the influence of various parameters, including contact time, pH conditions, and ionic strength, on the adsorption efficacy was comprehensively evaluated. The optimal contact time for adsorption was identified as 60 min, with the observation that an increase in inorganic salt concentration adversely affected the MGOs' adsorption capacity for both phenol and catechol. Specifically, MGOs exhibited a superior adsorption performance under mildly acidic conditions. The adsorption isotherm was well represented by the Langmuir model, suggesting monolayer coverage and finite adsorption sites for both pollutants. In terms of adsorption kinetics, a pseudo-first-order kinetic model was the most suitable for describing phenol adsorption, while catechol adsorption conformed more closely to a pseudo-second-order model, indicating distinct adsorption processes for these two similar compounds. Furthermore, this research utilized quantum chemical calculations to decipher the interaction mechanisms at the molecular level. Such calculations provided both a visual representation and a quantitative analysis of the interactions, elucidating the underlying physical and chemical forces governing the adsorption phenomena. The findings could not only offer crucial insights for the treatment of coal industrial wastewater containing phenolic compounds with bridging macroscopic observations with microscopic theoretical explanations but also advance the understanding of material-pollutant interactions in aqueous environments.

Bioresource Polymer Composite for Energy Generation and Storage: Developments and Trends

The ever-growing demand of human society for clean and reliable energy sources spurred a substantial academic interest in exploring the potential of biological resources for developing energy generation and storage systems. As a result, alternative energy sources are needed in populous developing countries to compensate for energy deficits in an environmentally sustainable manner. This review aims to evaluate and summarize the recent progress in bio-based polymer composites (PCs) for energy generation and storage. The articulated review provides an overview of energy storage systems, e. g., supercapacitors and batteries, and discusses the future possibilities of various solar cells (SCs), using both past research progress and possible future developments as a basis for discussion. These studies examine systematic and sequential advances in different generations of SCs. Developing novel PCs that are efficient, stable, and cost-effective is of utmost importance. In addition, the current state of high-performance equipment for each of the technologies is evaluated in detail. We also discuss the prospects, future trends, and opportunities regarding using bioresources for energy generation and storage, as well as the development of low-cost and efficient PCs for SCs.

Novel Concepts for Graphene-Based Nanomaterials Synthesis for Phenol Removal from Palm Oil Mill Effluent (POME)

In recent years, the global population has increased significantly, resulting in elevated levels of pollution in waterways. Organic pollutants are a major source of water pollution in various parts of the world, with phenolic compounds being the most common hazardous pollutant. These compounds are released from industrial effluents, such as palm oil milling effluent (POME), and cause several environmental issues. Adsorption is known to be an efficient method for mitigating water contaminants, with the ability to eliminate phenolic contaminants even at low concentrations. Carbon-based materials have been reported to be effective composite adsorbents for phenol removal due to their excellent surface features and impressive sorption capability. However, the development of novel sorbents with higher specific sorption capabilities and faster contaminant removal rates is necessary. Graphene possesses exceptionally attractive chemical, thermal, mechanical, and optical properties, including higher chemical stability, thermal conductivity, current density, optical transmittance, and surface area. The unique features of graphene and its derivatives have gained significant attention in the application of sorbents for water decontamination. Recently, the emergence of graphene-based adsorbents with large surface areas and active surfaces has been proposed as a potential alternative to conventional sorbents. The aim of this article is to discuss novel synthesis approaches for producing graphene-based nanomaterials for the adsorptive uptake of organic pollutants from water, with a special focus on phenols associated with POME. Furthermore, this article explores adsorptive properties, experimental parameters for nanomaterial synthesis, isotherms and kinetic models, mechanisms of nanomaterial formation, and the ability of graphene-based materials as adsorbents of specific contaminants.

Graphene-based materials for effective adsorption of organic and inorganic pollutants: A critical and comprehensive review

Water scarcity has been felt in many countries and will become a critical issue in the coming years. The release of toxic organic and inorganic contaminants from different anthropogenic activities, like mining, agriculture, industries, and domestic households, enters the natural waterbody and pollutes them. Keeping this in view in combating the environmental crises, removing pollutants from wastewater is one of the ongoing environmental challenges. Adsorption technology is an economical, fast, and efficient physicochemical method for removing both organic and inorganic pollutants, even at low concentrations. In the last decade, graphene and its composite materials have become the center of attraction for numerous applications, including wastewater treatment, due to the large surface area, highly active surface, and exclusive physicochemical properties, which make them potential adsorbents with unique physicochemical properties, like low density, chemical strength, structural variability, and the possibility of large-scale fabrications. This review article provides a thorough summary/critical appraisal of the published literature on graphene-, GO-, and rGO-based adsorbents for the removal of organic and inorganic pollutants from wastewater. The synthesis methods, experimental parameters, adsorption behaviors, isotherms, kinetics, thermodynamics, mechanisms, and the performance of the regeneration-desorption processes of these substances are scrutinized. Finally, the research challenges, limitations, and future research studies are also discussed. Certainly, this review article will benefit the research community by getting substantial information on suitable techniques for synthesizing such adsorbents and utilizing them in water treatment and designing water treatment systems.

Organo-Montmorillonite Modified by Gemini Quaternary Ammonium Surfactants with Different Counterions for Adsorption toward Phenol

The discharge of industrial phenol pollutants causes great harm to the natural environment and human health. In this study, phenol removal from water was studied via the adsorption of Na-montmorillonite (Na-Mt) modified by a series of Gemini quaternary ammonium surfactants with different counterions [(C₁₁H₂₃CONH(CH₂)₂N⁺ (CH₃)₂(CH₂)₂ N⁺(CH₃)₂ (CH₂)₂NHCOC₁₁H₂₃·2Y^-, Y = CH₃CO₃^-, C₆H₅COO^- and Br^-, 12-2-12·2Y^-]. The results of the phenol adsorption indicated that MMt-12-2-12·2Br^-, MMt-12-2-12·2CH₃CO₃^- and MMt-12-2-12·2C₆H₅COO^- reached the optimum adsorption capacity, which was 115.110 mg/g, 100.834 mg/g and 99.985 mg/g, respectively, under the conditions of the saturated intercalation concentration at 2.0 times that of the cation exchange capacity (CEC) of the original Na-Mt, 0.04 g of adsorbent and a pH = 10. The adsorption kinetics of all adsorption processes were in good agreement with the pseudo-second-order kinetics model, and the adsorption isotherm was better modeled by Freundlich isotherm. Thermodynamic parameters revealed that the adsorption of phenol was a physical, spontaneous and exothermic process. The results also showed that the counterions of the surfactant had a certain influence on the adsorption performance of MMt for phenol, especially the rigid structure, hydrophobicity, and hydration of the counterions.

Development and Evaluation of Cellulose/Graphene-Oxide Based Composite for Removing Phenol from Aqueous Solutions

In this study, a graphene oxide/cellulose composite (GO-cellulose) was prepared usingcellulose and graphene oxide (GO) through ultrasonication, followed by the freeze-dried method. The Brunauer-Emmett-Teller (BET) specific surface area of GO-cellulose (~6.042 m²/g) was higher compared to cellulose (1.023 m²/g).The UV-Visible spectraindicated that the prepared GO-cellulose composite removedphenol efficiently from aqueous solutions with high adsorption power. The effectiveness of the composite for phenol adsorption was examinedunder diverse conditions.The results reveal that the composite optimally improved the adsorption at pH 7 with a dose of 0.125 g/30 L in about 40 min. The adsorption process showed that in optimum conditions, 86 ± 2% of phenol was removed in 40 min with an adsorption capacity of 6.192 mg g^-1. The adsorption behavior was well fitted to the pseudo-second-order kinetic model and the Langmuir isotherms at all temperatures.The present study suggests that synthesized GO-cellulose is useful inthe removal of phenol pollutants from aqueous solutions.

Polyethylene glycol functionalized reduced graphene oxide coupled with zinc oxide composite adsorbent for removal of phenolic wastewater

The development of agricultural activities and industrialization recently has various adverse impacts on living organisms. The ever-increasing problem of organic pollution has been an environmental concern to the community. Among these, phenolic pollutants like 2,4-dichlorophenol (2,4-DCP), phenol, 2-chlorophenol (2-CP), and bisphenol-A (BPA) are priority toxic pollutants that are continuously released into environment from many industries. In this work, a biocompatible zinc oxide incorporated polyethylene glycol functionalized reduced graphene oxide composite (RGO-PEG-ZnO) was synthesized and explored for the adsorptive removal of toxic phenolic pollutants from water. The optimized adsorption parameters were solution pH 7, adsorption time 60 min, temperature 25 °C, and dosage 0.25 g/L. The isotherms were well fitted by the Langmuir model for BPA and phenol, whereas for 2-CP, and 2,4-DCP, Freundlich was the best-fitted model, and the maximum uptake of BPA, phenol, 2-CP, and 2,4-DCP were 485.756, 511.248, 531.804, 570.641 mg/g, respectively. The kinetic data for all the phenolic pollutants follow the pseudo-second-order model. The thermodynamic analysis shows that Gibb's free energy (ΔG^o) values for all the pollutants were negative, confirming that the process was spontaneous. The positive values of change in enthalpy (ΔH^o) 28.261, 37.205, 46.182, and 61.682 kJ/mol for BPA, phenol, 2-CP, and 2,4-DCP, respectively, confirm that the above adsorption process was endothermic. The composite can be used for up to five cycles with a small reduction in the removal percentage. Adsorption performance of the synthesized composite for synthetic industrial effluents shows that up to 86.54% removal occurred in 45 min adsorption time. Based on the remarkably rapid adsorption and high adsorption capacity, RGO-PEG-ZnO composite can be considered an efficient adsorbent for treating phenolic pollutants from wastewater.

Synthesis of novel epichlorohydrin cross-linked β-cyclodextrin functionalized with reduced graphene oxide composite adsorbent for treatment of phenolic wastewater

A novel composite consisting reduced graphene oxide-functionalized beta-cyclodextrin epichlorohydrin polymer (RGO-βCD-ECH) was synthesized for the treatment of phenolic wastewater. Batch study of phenolic pollutants (2,4-dichlorophenol, 2-chlorophenol, and phenol) was analyzed using the synthesized composite as an adsorbent from an aqueous solution. The optimized parameters were temperature 25 °C, adsorption time 60 min, solution pH 7, and dosage 0.25 g/L. The isotherm data were more suitably fitted by the Langmuir isotherm model. The maximum uptake for 2,4-dichlorophenol, phenol, and 2-chlorophenol was 702.853, 659.475, and 674.155 mg/g, respectively, at 25 ± 1 °C. The kinetic data for all the phenolic pollutants follow the pseudo-second-order model, and the rate was controlled by film diffusion. Thermodynamic data revealed that the process of removing phenolic pollutants is spontaneous and endothermic. The composite can be used up to five cycles with a small reduction in the removal. Adsorption performance of the synthesized composite for synthetic industrial effluents shows that up to 78% removal occurred in 60 min adsorption time. Based on the remarkably rapid adsorption and high adsorption capacity, the synthesized composite can be considered an efficient adsorbent for treating phenolic pollutants from wastewater.

Synthesizing and Optimizing Rutile TiO2 Nanoparticles for Magnetically Guided Drug Delivery

Introduction

Titanium dioxide nanoparticles (TiO₂ NPs) have shown tremendous potential in targeted drug-delivery applications. Among various mechanisms, magnetically guided transport of drugs is one such technique for the said purpose. TiO₂ NPs being diamagnetic or sometimes exhibiting very weak ferromagnetism can be modified by treating them with suitable magnetic materials.

Methods

Rutile TiO₂ NPs were synthesized and doped with Iron Supplement FericipXT and rare-earth metals like cerium, erbium and neodymium via sol–gel technique. FericipXT-coated rutile TiO₂ NPs were synthesized in three different core-shell ratios (1:3, 1:1 and 3:1). The resulting samples were characterized via X-ray Diffraction (XRD), Vibrating Sample Magnetometer (VSM) and High-Resolution Transmission Electron Microscopy (HR-TEM).

Results

XRD of FericipXT-doped TiO₂ NPs showed a rutile phase for 1% and 3% doping; however, only a small fraction of the maghemite phase was obtained for 5% doping. The XRD plots of Ce-doped, Er-doped and Nd-doped TiO₂ NPs showed a variety of phases of TiO₂ NPs (such as anatase/rutile/mixed) along with the oxide phases of the corresponding rare-earth metal. The presence of various iron titanium oxides and iron oxides was found in core-shell NPs. HR-TEM images confirmed the formation of 1:3, 1:1 and 3:1 core-shell TiO₂ NPs. VSM studies showed that the resulting NPs depicted magnetism in the form of superparamagnetism, ferromagnetism and even paramagnetism.

Discussion

The doping to 3% does not affect the original phase of the resulting TiO₂ NPs as depicted from the XRD; however, a doping of 5% and more resulted in extra phases corresponding to the dopant added. FericipXT was loaded over TiO₂ NPs in amorphous form. Among all the samples synthesized, FericipXT-coated TiO₂ NPs demonstrated the best magnetic ability. It was deduced that coating with a magnetic material drastically improves the magnetic character of the host NPs.