A novel pyrazole bearing imidazole frame as ratiometric fluorescent chemosensor for Al3+/Fe3+ ions and its application in HeLa cell imaging

Modern Approaches in Organic Chromofluorescent Sensor Synthesis for the Detection of Considered First-Row Transition Metal Ions

The development of optical chemosensors for the sensitive and selective detection of trace-level metal ions in aqueous solutions has drawn a lot of attention from the scientific community in recent years. Organic sensors offer a number of advantages over traditional identification techniques, including low cost, high sensitivity, selectivity, and simplicity of synthesis. We will focus on colorimetric and fluorometric sensors based on their receptors for the real-time detection of certain first-row transition metal ions like Cr3+, Mn2+, Fe2+, Co2+, Ni2+ Cu2+, and Zn2+. The development of these sensors will aid in the rapid and simple resolution of several problems linked to the detection of potentially hazardous metal ions at trace levels in diverse biological and environmental components. This review article not only gives a comprehensive understanding of the existing techniques, but also encourages more research efforts to address the evolving demands in the field of trace transition metal ion detection.

An Introductory Overview on Applications of Pyrazoles as Transition Metal Chemosensors

Utility of pyrazoles and their derivatives in constructing ordered porous materials with physicochemical characteristics such as chemosensors has undoubtedly created much interest in developing newer frameworks. A variety of pyrazole based chemosensors are known for their remarkable photophysical, pH sensitivity, solvatochromic, ion detection, high quantum yields and nonlinear optical behavior. Many of the transition metals have shown beneficial biological effects in biological systems. There is always a need of continuous monitoring to maintain an adequate range of all and specifically for the toxic ones like mercury. Pyrazoline nanoparticle probes have been reported for sensing/detection of Hg2+ions. Pyridinyl pyrazoline and benzimidazolyl pyrazole derived sensors are more selective and sensitive towards Zn2+and Fe3+ ions respectively. Pyrazole derived metal organic frameworks (MOF's) have been reported for environmental monitoring and biological imaging. Keeping in view of the enormous synthetic and biological importance of pyrazoles, herein, we are presenting an overview on applications of pyrazoles in transition metal chemosensors.

An experimental and theoretical study on mechanistic insights into urolithin-based ratiometric fluorescent probe for instant quantitative detection of fluoride ions

Fluoride detection has been playing an important role in chemical, biological, and medicinal field, especially for keeping physical health and resisting environmental pollution. Herein, a urolithin B fluorescent probe has been successfully developed with good sensitivity, selectivity, anti-interference ability. The low limit of detection (LOD) refers to 0.156 μM, and the instant response time to F- is less than 1 s. The probe is suitable for quantitatively and qualitatively ratiometric detection for F- in solution with two distinct emission bands at 425 (blue) and 566 nm (orange), with the coordinate change of CIE from (0.38, 0.41) to (0.22, 0.11). Urolithin B displayed a remarkable ratiometric fluorescence response towards F-. The detection mechanistic was further proposed by NMR and electronic spectroscopic experiments combining with time-dependent density functional theoretical calculation.

Imidazole Compounds: Synthesis, Characterization and Application in Optical Analysis

Imidazole is a five-membered heterocyclic ring containing three carbon atoms, two nitrogen atoms, and two double bonds. Among two nitrogen atoms, one of which carries with a hydrogen atom is a pyrrole-type nitrogen atom, another is a pyridine type nitrogen atom. Hence, the imidazole ring belongs to the π electron-rich aromatic ring and can accept strong suction to the electronic group. Moreover, the nitrogen atom of the imidazole ring is coordinated with metal ions to form metal-organic frameworks. In recent years, because of imidazole compounds' unique optical properties, their applications have attracted more and more attention in optical analysis. Thus, this review has summarized the synthesis, characterization, and application with emphasis on the research progress of imidazole compounds in optical analysis, including fluorescence probe, colorimetric probe, electrochemiluminescence sensor, fiber optical sensor, surface plasmon resonance, etc. This paper will suggest the direction for the development of imidazole-containing sensors with high sensitivity and selectivity.

Performance of 4,5-diphenyl-1H-imidazole derived highly selective 'Turn-Off' fluorescent chemosensor for iron(III) ions detection and biological applications

Two fluorescent chemosensors, denoted as chemosensor 1 and chemosensor 2, were synthesized and subjected to comprehensive characterization using various techniques. The characterization techniques employed were Fourier-transform infrared (FTIR), proton (1 H)- and carbon-13 (13 C)-nuclear magnetic resonance (NMR) spectroscopy, electrospray ionization (ESI) mass spectrometry, and single crystal X-ray diffraction analysis. Chemosensor 1 is composed of a 1H-imidazole core with specific substituents, including a 4-(2-(4,5-c-2-yl)naphthalene-3-yloxy)butoxy)naphthalene-1-yl moiety. However, chemosensor 2 features a 1H-imidazole core with distinct substituents, such as 4-methyl-2-(4,5-diphenyl-1H-imidazole-2-yl)phenoxy)butoxy)-5-methylphenyl. Chemosensor 1 crystallizes in the monoclinic space group C2/c. Both chemosensors 1 and 2 exhibit a discernible fluorescence quenching response selectively toward iron(III) ion (Fe3+ ) at 435 and 390 nm, respectively, in dimethylformamide (DMF) solutions, distinguishing them from other tested cations. This fluorescence quenching is attributed to the established mechanism of chelation quenched fluorescence (CHQF). The binding constants for the formation of the 1 + Fe3+ and 2 + Fe3+ complexes were determined using the modified Benesi-Hildebrand equation, yielding values of approximately 2.2 × 103 and 1.3 × 104  M-1 , respectively. The calculated average fluorescence lifetimes for 1 and 1 + Fe3+ were 2.51 and 1.17 ns, respectively, while for 2 and 2 + Fe3+ , the lifetimes were 1.13 and 0.63 ns, respectively. Additionally, the applicability of chemosensors 1 and 2 in detecting Fe3+ in live cells was demonstrated, with negligible observed cell toxicity.

A novel reversible fluorescent probe for sequential detection of Al3+ and HPO42- based on caffeic acid and its applicability in cell imaging

In this work, we focused on synthesizing a new fluorescent probe HBA based on caffeic acid for detecting Al3+/HPO42- by the mode of "off-on-off". HBA alone exhibited a weak fluorescence emission in aqueous solution. When Al3+ was added into the HBA solution, a significant green fluorescence was found at 498 nm. However, the introduction of HPO42- to the solution of [HBA-Al3+] complex induced the disappearance of green fluorescence. The detection limit of HBA was calculated as low as 41.7 nM for Al3+ and 62.1 nM for HPO42-, respectively. Probe HBA exhibited good cell-membrane penetrability and had the potential to trace Al3+/HPO42- in biological systems.

A novel "turn on" fluorescence probe based on a caffeic acid skeleton for detecting Al3+ and bioimaging application

The specificity detection of Al³⁺ is important for monitoring life health and environmental pollution. A fluorescence enhancement probe based on caffeic acid HAM was synthesized for detecting Al³⁺ with high sensitivity and good selectivity. When Al³⁺ was added in the aqueous solution of HAM, the formation of HAM-Al³⁺ complexes inhibited the PET process, which led to great enhancement of fluorescence. The addition of other metal ions cannot induce the change of fluorescence intensity. The sensing mechanism was proved by ¹H NMR titration, MS, and Job's plot. Moreover, probe HAM exhibited excellent properties, such as high sensitivity (LOD = 0.168 μM), fast response time (30 s), wide pH range (3-11), and good interference ability. Based on the above results, probe HAM was used to explore its bioimaging application in biological samples.

Comprehensive Insights into Medicinal Research on Imidazole-Based Supramolecular Complexes

The electron-rich five-membered aromatic aza-heterocyclic imidazole, which contains two nitrogen atoms, is an important functional fragment widely present in a large number of biomolecules and medicinal drugs; its unique structure is beneficial to easily bind with various inorganic or organic ions and molecules through noncovalent interactions to form a variety of supramolecular complexes with broad medicinal potential, which is being paid an increasing amount of attention regarding more and more contributions to imidazole-based supramolecular complexes for possible medicinal application. This work gives systematical and comprehensive insights into medicinal research on imidazole-based supramolecular complexes, including anticancer, antibacterial, antifungal, antiparasitic, antidiabetic, antihypertensive, and anti-inflammatory aspects as well as ion receptors, imaging agents, and pathologic probes. The new trend of the foreseeable research in the near future toward imidazole-based supramolecular medicinal chemistry is also prospected. It is hoped that this work provides beneficial help for the rational design of imidazole-based drug molecules and supramolecular medicinal agents and more effective diagnostic agents and pathological probes.

Oxadiazole Schiff Base as Fe3+ Ion Chemosensor: "Turn-off" Fluorescent, Biological and Computational Studies

Compound, (E)-5-(4-((thiophen-2-ylmethylene)amino)phenyl)-1,3,4-oxadiazole-2-thiol (3) was synthesized via condensation reaction of 5-(4-aminophenyl)-1,3,4-oxadiazole-2-thiol with thiophene-2-carbaldehyde in ethanol. For the synthesis and structural confirmation the FT-IR, ¹H, ¹³C-NMR, UV-visible spectroscopy, and mass spectrometry were carried out. The long-term stability of the probe (3) was validated by the experimental as well as theoretical studies. The sensing behaviour of the compound 3 was monitored with various metal ions (Ca²⁺, Cr³⁺, Fe³⁺, Co²⁺, Mg²⁺, Na⁺, Ni²⁺, K⁺) using UV- Vis. and fluorescence spectroscopy techniques by various methods (effect of pH and density functional theory) which showing the most potent sensing behaviour with iron. Job's plot analysis confirmed the binding stoichiometry ratio 1:1 of Fe³⁺ ion and compound 3. The limit of detection (LOD), the limit of quantification (LOQ), and association constant (K_a) were calculated as 0.113 µM, 0.375 µM, and 5.226 × 10⁵ respectively. The sensing behavior was further confirmed through spectroscopic techniques (FT-IR and ¹H-NMR) and DFT calculations. The intercalative mode of binding of oxadiazole derivative 3 with Ct-DNA was supported through UV-Vis spectroscopy, fluorescence spectroscopy, viscosity, cyclic voltammetry, and circular dichroism measurements. The binding constant, Gibb's free energy, and stern-volmer constant were find out as 1.24 × 10⁵, -29.057 kJ/mol, and 1.82 × 10⁵ respectively. The cleavage activity of pBR322 plasmid DNA was also observed at 3 × 10^-5 M concentration of compound 3. The computational binding score through molecular docking study was obtained as -7.4 kcal/mol. Additionally, the antifungal activity for compound 3 was also screened using broth dilution and disc diffusion method against C. albicans strain. The synthesized compound 3 showed good potential scavenging antioxidant activity against DPPH and H₂O₂ free radicals.

Anthracene scaffold as highly selective chemosensor for Al3+ and its AIEE activity

Fluorescent chemosensor, 3-(Anthracen-2-yliminomethyl)-benzene-1,2-diol (ANB) has been synthesized by one-step condensation of 2-aminoanthracene and 2,3-dihydroxybenzaldehyde and characterized using ¹H-NMR, FT-IR and Mass spectroscopic techniques. The probe ANB was found to be an efficient 'turn-on' fluorescence chemosensor for the selective detection of Al³⁺ ion over other metal ions in an aqueous solution. The chemosensor exhibits ~ 27-fold enhancement of emission intensity in presence of Al³⁺ ion. Fluorescence quantum values for ANB and (Al³⁺-ANB)-complex are 0.004 and 0.097, respectively. In addition, the binding constant and the limit of detection were found to be 1.22 × 10⁴ M^-1 and 0.391 µM, respectively. The chemosensor ANB binds to Al³⁺ ions in 2:1 stoichiometric ratio which was supported by Job's plot, ¹H-NMR titration and florescence titration. Fluorescence reversibility of the sensor complex was well established by adding EDTA in the same condition and a molecular INHIBIT logic gate was fabricated using this reversible nature of the sensor complex. Additionally, the chemosensor ANB shows a novel aggregation-induced enhanced emission phenomenon, where the aggregate hydrosol of ANB shows enhance emission intensity.

A Colorimetric Distinct Color Change Cu(II) 4-{[1-(2,5-dihydroxyphenyl)ethylidene]amino}-1,5-dimethyl-2-phenyl-1,2-dihydro-3H-pyrazol-3-one Chemosensor and its Application as a Paper Test Kit

In the current research work "4-{[1-(2,5-dihydroxyphenyl)ethylidene]amino}-1,5-dimethyl-2-phenyl-1,2-dihydro-3H-pyrazol-3-one" chemosensor (C1) synthesized by condensation reaction using "4-amino-1,2-dihydro-1,5-dimethyl-2-phenylpyrazol-3-one" and "2,5-dihydroxy actophenone" was used as the effective sensor of metal ion. The C1 shows absorption peak at 326 nm due to the C = C bond (π-π* transition), while the absorption peak at 364 nm is caused by the C = O bond (n-π* transition). In the presence of copper, C1 only demonstrated a redshift in absorption peak from 364 to 425 nm. Even in the presence of other competing metal ions, the hypsochromic shift of the absorption band and the quenching of the fluorescence emission intensity were different for detecting Cu²⁺, in CH₃OH-H₂O (v/v = 6:4). The capacity of the C1 to bind with Cu²⁺ was further proved using DFT simulations. The complex C1 + Cu²⁺ has a HOMO-LUMO energy gap of 2.8002 eV, which is lesser than C1 (2.9991 eV) showing improvement in the stability of the C1 + Cu²⁺ complex. Using the Benesi-Hildebrand and Scatchard plots, calculated Kb values were to be 47,340 and 48369 M^-1 respectively, showing the creation of stable complexation between Cu²⁺ and C1 with 1:1 stoichiometry. The limit of detection (LOD) for Cu²⁺ ion was 649 nM. Strip sheets were also built and tested to detect varying amounts of Cu²⁺ in aqueous solution, and their color change suggested that they might be used for on-site Cu²⁺ detection in polluted water.

A highly selective colorimetric and fluorescent probe Eu(tdl)2abp for H2S sensing: Application in live cell imaging and natural water

Using 4-([2,2': 6', 2'- terpyridin] -4'-yl) -N, N-dimethylaniline (tdl) as auxiliary ligand and 6-azido-2,2'-bipyridine (abp) as recognition ligand, a europium complex fluorescent probe Eu(4-([2,2': 6', 2'-terpyridin] -4' -yl) -N, N-dimethylaniline)₂-6-azido-2,2'-bipyridine Eu(tdl)₂abp for efficient and specific recognition of hydrogen sulfide (H₂S) was successfully synthesized and characterized by NMR and MS. Eu(tdl)₂abp represented "on-off" fluorescence signals for H₂S and its color changes could be identified with naked eyes. Eu(tdl)₂abp had short response time (2 min) to H₂S, high selectivity and good anti-interference, large stokes shift (207 nm). In various samples, when H₂S existed, the azide group was reduced to amine group, resulting in closed fluorescence signal, and the fluorescence intensity reached the degree of quenching without being affected by other interference. At the same time, there was a good linear relationship between relative fluorescence intensity and H₂S concentration with the detection limit (LOD) of 0.64 μM. The sensing mechanism of Eu(tdl)₂abp to detect H₂S was characterized by ¹H NMR and HR-MS. Eu(tdl)₂abp was used with success for the sensitive detection of H₂S in natural water and living cells.

Zinc ion detection using a benzothiazole-based highly selective fluorescence "turn-on" chemosensor and its real-time application

A new photochromic fluorescence chemosensor was devised and effectively synthesized using benzothiazole and imidazopyridine derivatives. A "turn-on" fluorescence sensor BIPP for Zn2+ detection was developed and has a quick response, excellent sensitivity, and remarkable selectivity over other metal ions. When Zn2+ was added to the BIPP solution, a new strong fluorescence emission peak at 542 nm formed with a considerable increase in intensity. The fluorescence color of the BIPP solution changed from blue to bright green. The binding ratio 8 : 2 was found between BIPP and Zn2+ by the results of Job's plot, HRMS and 1H-NMR. The detection limit (LOD) of BIPP towards Zn2+ was determined to be 2.36 × 10-8, which is remarkably low. The ability to detect Zn2+ in real water samples demonstrates that BIPP may also be used in environmental systems. Additionally, BIPP can be used to measure Zn2+ levels in living cells.

Ni (II) detection by 2-amino-5-substituted-1,3,4-oxadiazole as a chemosensor using photo-physical method: Antifungal, antioxidant, DNA binding, and molecular docking studies

An oxadiazole derivative 2 was prepared by condensation reaction through cyclization of semicarbazone in the presence of bromine and the structural confirmation was supported by ¹ H and ¹³ C NMR, FT-IR spectroscopy, and LC-MS spectrometry. Its sensing ability was examined towards Ni²⁺ ion with binding constant 1.04 x 10⁵ over the other suitable metal cations (Ca²⁺ , Co²⁺ , Cr³⁺ , Ag⁺ , Pb²⁺ , Fe³⁺ , Mg²⁺ , and K⁺ ) by UV-visible and fluorescence spectroscopic studies and the minimum concentration of Ni²⁺ ion with LOD was found to be 9.4μM. Job's plot method gives the binding stoichiometry ratio of Ni²⁺ ion vs oxadiazole derivative 2 to be 2:1. Furthermore, the intercalative binding mode of oxadiazole derivative 2 with Calf Thymus DNA was supported by UV-Vis, fluorescence, viscosity, cyclic voltammetry, time-resolved fluorescence, and circular dichroism measurements. The molecular docking result gives the binding score for oxadiazole derivative 2 to be -6.5 kcal/mol, which further confirms the intercalative interaction. In addition, the anti-fungal activity of oxadiazole derivative 2 was also screened against fungal strains (C. albicans, C. glabrata, and C. tropicalis) by broth dilution and disc diffusion method. In the antioxidant studies, the oxadiazole derivative 2 showed potential scavenging activity against DPPH and H₂ O₂ free radicals.

Development of dipodal fluorescence sensor of iron for real samples based on pyrene modified anthracene

A novel pyrene modified anthracene dipodal sensor was prepared by a simple synthetic method for the sensitive determination of iron ions in real samples. The chemical characterization analyses including nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy, and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry were carried out to characterize the target fluorescent sensor. Photophysical and electrochemical behaviors of the sensor were studied by the absorption, excitation-emission matrix analysis, steady-state fluorescence, three-dimensional fluorescence, and cyclic and square wave voltammetry, respectively. The fluorescent sensor properties were evaluated via Ultraviolet-visible and fluorescence spectroscopies. According to obtained results, the fluorescence signal of the sensor was selectively quenched with interaction with Fe³⁺ ions. The spectrofluorimetric determination of iron, in real water and medicine samples were successfully carried out under optimized experimental conditions. A detection limit and linear working range were calculated as 0.265 μM and 0.275-55.000 μM, respectively which demonstrated the ability of the simple and sensitive sensor for slight amounts of iron. The obtained detection limit for iron determination with the presented novel fluorescent sensor was less than nearly 20 times the tolerance limit (5.40 µM) in drinking water that was determined by the United States Environmental Protection Agency. The accuracy of the newly developed method was evaluated by Inductively coupled plasma optical emission spectroscopy and spike/recovery test which demonstrated that the developed fluorescent sensor has high accuracy for fast, easy and accessible determination of iron at 95% confidence level.