Ultra-fast and visual detection of hydrazine hydrate based on a simple coumarin derivative

Fluorescent probe for imaging N2H4 in plants, food, and living cells and for quantitative detection of N2H4 in soil and water using a smartphone

Hydrazine is volatile and highly toxic, causing severe harm to water, soil, air, and organisms. Therefore, real-time detection and long-term monitoring of hydrazine are crucial for environmental protection and human health. Herein, an "OFF-ON" fluorescent probe 5-((10-ethyl-2-methoxy-10 H-phenothiazin-3-yl)methylene)-2,2-dimethyl-1,3-dioxane-4,6-dione (MPD) for hydrazine detection through a nucleophilic addition reaction was developed. MPD could exclusively identify hydrazine through colorimetric and fluorescent dual-channel responses within 30 s, which also demonstrated high sensitivity (detection limit, 12 nM) and a wide pH range (6 -12). The sensing mechanism of MPD was confirmed using theoretical calculations, where fluorescence was emitted following the recognition of hydrazine because of the disappearance of the photoinduced electron transfer (PET) process. Using a smartphone, MPD enabled the quantitative detection of hydrazine in real water samples and sandy soil. Notably, in the process of detecting hydrazine in actual water samples, the establishment of analytical methods and the completion of rapid quantitative detection only required a smartphone and built-in apps. Additionally, we showed that MPD could recognize hydrazine in various environmental samples, including plants, food, hydrazine vapors, and cells. We believe that the fluorescent probe MPD developed in this study and the established smartphone visualization platform will provide a convenient and effective tool for detecting hydrazine in environmental monitoring, food safety assessment, biological system safety, and other fields.

d-type peptides based fluorescent probes for "turn on" sensing of heparin

Developing "turn on" fluorescent probes was desirable for the detection of the effective anticoagulant agent heparin in clinical applications. Through combining the aggregation induced emission (AIE) fluorogen tetraphenylethene (TPE) and heparin specific binding peptide AG73, the promising "turn on" fluorescent probe TPE-1 has been developed. Nevertheless, although TPE-1 could achieve the sensitive and selective detection of heparin, the low proteolytic stability and undesirable poor solubility may limit its widespread applications. In this study, seven TPE-1 derived fluorescent probes were rationally designed, efficiently synthesized and evaluated. The stability and water solubility were systematically estimated. Especially, to achieve real-time monitoring of proteolytic stability, the novel Abz/Dnp-based "turn on" probes that employ the internally quenched fluorescent (IQF) mechanism were designed and synthesized. Moreover, the detection ability of synthetic fluorescent probes for heparin were systematically evaluated. Importantly, the performance of d-type peptide fluorescent probe XH-6 indicated that d-type amino acid substitutions could significantly improve the proteolytic stability without compromising its ability of heparin sensing, and attaching solubilizing tag 2-(2-aminoethoxy) ethoxy) acid (AEEA) could greatly enhance the solubility. Collectively, this study not only established practical strategies to improve both the water solubility and proteolytic stability of "turn on" fluorescent probes for heparin sensing, but also provided valuable references for the subsequent development of enzymatic hydrolysis-resistant d-type peptides based fluorescent probes.

A ratiometric fluorescent probe with a large Stokes shift for the detection of Hg2+ and its applications in environmental sample and living system analysis

Toxic mercury ions (Hg2+) can cause serious environmental pollution and accumulate in living organisms via the food chain. Therefore, monitoring Hg2+ is crucial in ensuring the safety of ecosystems and organisms. In this work, a novel ratiometric fluorescent probe CMT (5-(4-(diphenylamino)phenyl)-1-(7-hydroxy-coumarin-3-yl)-4-pentene-1,3-dione) based on coumarin was developed for detecting Hg2+, which displayed obvious fluorescence changes, a low detection limit (2.24 × 10-7 M), good selectivity, and a large Stokes shift (255 nm). The CMT probe could detect Hg2+ in real environmental soil and water samples. Furthermore, the CMT probe enabled the naked-eye detection of Hg2+ using test paper experiments. CMT was also applied for fluorescence imaging in living zebrafish and plants. This work provides a highly efficient tool for monitoring Hg2+ in environmental samples and biological systems.

Engineering a "turn-on" NIR fluorescent sensor-based hydroxyphenyl benzothiazole with a cinnamoyl unit for hydrazine and its environmental and in-vitro applications

Hydrazine (N2H4), a chemical compound widely used in various industrial applications, causes significant environmental and biological hazards. Therefore, it is crucial to develop methodologies for the visualization and real time tracking of N2H4. In this regard, we have constructed a novel near-infrared fluorescent probe (HBT-Cy) that can effectively detect N2H4 in various samples. HBT-Cy contains 2-(2'-hydroxyphenyl)benzothiazole (HBT), cinnamoyl (Cy), and pyridinium (Py) moieties. Importantly, HBT-Cy exhibits a rapid, selective, and highly sensitive response to N2H4. This response results in the release of HBT-Py and the generation of considerable colorimetric changes along with a significant NIR (near infrared) fluorescence signal, peaking at 685 nm. Advantages of this system include turn on NIR fluorescence with large Stokes shift, (approximately 171 nm), low limit of detection (LOD = 0.11 μM) and quantum yield (0.211). The probe with low cytotoxic behavior demonstrates strong NIR fluorescence imaging capabilities to visualize endogenous and exogenous N2H4 in live cells. This mitochondria-targetable probe shows effective subcellular localization. These results suggest that HBT-Cy is a valuable probe for tracking and investigating the behavior of N2H4 in biological systems and environmental samples.

Advances in Optical Probes for the Detection of Hydrazine in Environmental and Biological Systems

Hydrazine, as a crucial raw material in the fine chemical industry, plays an indispensable role in fuel, catalyst, pesticide and drug synthesis. Due to its good water solubility and high toxicity, hydrazine can cause irreparable damage to water and soil in the environment, and it can also be released by taking certain drugs, which brings potential risks to human health. Therefore, it is vital to develop a method that can specifically detect hydrazine in the environment and in vivo. As an effective analysis and detection tool, fluorescence probe has attracted extensive attention in recent years. In this review, we summarized and classified hydrazine fluorescence probes based on various reaction mechanisms, and discussed their structures and applications in the past ten years. At least, we briefly outline the challenges and prospects in this field.

Semicarbazide-based fluorescent probe for detection of Cu2+ and formaldehyde in different channels

Two fluorescent sensors with the receptor semicarbazide respectively at 7- (CAA) and 3-position (CAB) of coumarin were designed and synthesized. CAA exhibits fluorescence turn-on response to Cu²⁺ by triggering the intramolecular charge transfer (ICT) process via Cu²⁺-catalyzed hydrolysis, and can detect formaldehyde (FA) at different channel by inhibiting the photo-induced electron transfer (PET). However, CAB displays quite different responses: the photophysical properties hardly changed in the presence of FA; while a three-stage fluorescence response of fast quenching, steady increasing and slowly decreasing was found upon addition of Cu²⁺. The high selectivity enabled CAA a good candidate for quantification of Cu²⁺ and formaldehyde as well as bioimaging Cu²⁺ in living cells. Good linear relationships between the fluorescence intensity and analyte concentration were observed in the range of 0.1-30 μM for Cu²⁺ and 1.0-50 μM for FA, and their detection limits (LOD) were calculated to be 0.43 μM and 1.92 μM (3δ/k), respectively.

Simple and efficient PET and AIEE mechanism-based fluorescent probes for sensing Tabun mimic DCNP

The highly sensitive, selective, easy-to-prepare, aqueous media based on two novel probes 2-(pyren-1-yl)imidazo[1,2-a]pyridine (IMP-Py) and (2-(pyren-1-yl)imidazo[1,2-a]pyridin-3-yl)methanol (IMP-Py-OH) are synthesized for the detection of toxic chemical warfare nerve agent mimic diethylcyanochlorophosphonate (DCNP). Both probes are found effective in the detection of DCNP but comparatively, IMP-Py shows better properties in terms of instantaneous response, specificity, selectivity and a low detection limit of 16.9 nM. A significant enhancement of fluorescence intensity of IMP-Py due to aggregation-induced emission enhancement (AIEE) and photoinduced electron transfer (PET) phenomenon was inhibited due to phosphorylation of the hydroxy group of IMP-Py-OH in presence of DCNP has been observed. Taking the advantages of good sensitivity and fast response, probe IMP-Py has been fabricated into a viable paper strips portable product, tested for its potential for the detection of DCNP in tap water as well as with its vapor and response is visible under a UV lamp of 365 nm wavelength.

An ICT-Based Coumarin Fluorescent Probe for the Detection of Hydrazine and Its Application in Environmental Water Samples and Organisms

As an inorganic small molecule pollutant, the toxicity and potential carcinogenicity of hydrazine (N₂H₄) are of increasing concern. In this work, A water-soluble fluorescent probe (OCYB) based on the intramolecular charge transfer (ICT) mechanism for the detection of hydrazine was designed and synthesized. Taking the advantage of 4-bromobutyryl as the recognition group, the high selectivity of OCYB to N₂H₄ was confirmed by steady-state fluorescence spectroscopy. The limit of detection (LOD) was calculated to be 78 nM in the DMSO-HEPES (pH 7.4) system. The detection mechanism was verified by NMR, HRMS and density functional theory (DFT) calculations. In addition, OCYB exhibits strong anti-interference ability and an “Off-On” fluorescence enhancement effect. Importantly, OCYB can be used to effectively monitor the fluorescence distribution of N₂H₄ in environmental water samples and organisms.

Ratiometric fluorescence chemodosimeter for hydrazine in aqueous solution and gas phase based on Quinoline-Malononitrile

The widespread use of Hydrazine (N₂H₄) in many areas of the chemical industry, brings potential risks to human health and environmental pollution. To detect N₂H₄ effectively, a simple ratio fluorescence probe (QMM), designed and synthesized through Vilsmeier reaction and Knoevenagel reaction, was prepared for the specific response of N₂H₄ based on the irreversible chemical reaction. The ratiometric fluorescence chemodosimeter displayed a response for hydrazine with high selectivity, sensitivity and anti-interference ability. The measured detection limit is 38.30 nm (0.122 ppb), which is far lower than the maximum allowable level of the U.S. Environmental Protection Agency (10 ppb). Moreover, test paper and TLC plates loading QMM had been made, which could be utilized to detect hydrazine both in aqueous solution samples and in gas phase samples. Thus QMM could serve as an easily manufactured, low-cost, efficient and portable solid-state optical probe to detect hydrazine in field measurements.

A Critical Review on Organic Small Fluorescent Probes for Monitoring Carbon Monoxide in Biology

Endogenous carbon monoxide (CO) is an important intracellular gas messenger that is intimately involved in many physiological and pathological processes. The abnormal concentration of CO in living organisms can cause many diseases. Therefore, it is of great significance to monitor CO in biological samples. Fluorescent probe technology provides an effective and convenient method for CO monitoring, with the advantages of high selectivity and sensitivity, fast response time and in situ fluorescence imaging in biological tissues, which is favored by the majority of researchers. In this paper, the research progress of CO fluorescent probes since 2018 is reviewed, and the design, detection mechanism and biological application of the related fluorescent probes are summarized. And the relationship between the structure and performance of the probes is discussed. Furthermore, the development trend and application prospect of CO fluorescent probes are prospected.

The recent advance of organic fluorescent probe rapid detection for common substances in beverages

The beverage industry is confronted with tremendous challenges in terms of quality assurance. The allowed contents of common ingredients such as copper ions, hydrogen sulfide, cysteine and caffeine are stipulated by various governing bodies, and the beverage industry must ensure that it meets these requirements. Due to its unique advantages of high sensitivity, low cost and relatively low toxicity over high-performance liquid chromatography, atomic absorption spectrometry and nanomaterials, the use of organic fluorescent probes for the rapid detection of beverage contents has become a hot research topic. This review summarizes the detection of common substances in wine, tea, mineral water, milk and other beverages. Furthermore, the preparation of test paper and simple colour comparison are discussed to display the rapid qualitative capability of designed probes. To improve the current state of beverage safety, future trends and strategies for fast organic fluorescent probe detection in the beverage industry are also discussed.