Characterization of combined cross-linked enzyme aggregates from laccase, versatile peroxidase and glucose oxidase, and their utilization for the elimination of pharmaceuticals

Innovative laccase-based hollow packed-bed reactor for continuous treatment of hospital wastewater

This study reports on laccase-mediated removal of trace organic compounds (TrOCs) from real hospital wastewater (HWW) in a packed-bed reactor (PBR). The reactor column consisted of a catalytic bed of amino-functionalized mesoporous silica microspheres attached to a hollow polyethylene packing on which a Trametes hirsuta laccase was immobilized. This bed material had the advantage of significantly limiting pressure drop, which is one of the major drawbacks of PBRs operating in continuous mode. The PBR was fed with HWW, previously filtered through a 0.45-µm PTFE filter. The HWW was used either unspiked or spiked at 1 µg L-1 with acetaminophen, ibuprofen, naproxen, ketoprofen, mefenamic acid, indomethacin, and carbamazepine. A kinetic model combining the substrate conversion (1st-order kinetic) and the biocatalyst inactivation (1st-order kinetic) was developed and implemented, using acetaminophen as a model phenolic compound. After validation, the model showed good fit with experimental data and robustness regarding extended time operation with real HWW under uncontrolled conditions (pH, unbuffered media, ambient temperature). After 6 h of contact time, more than 95% of acetaminophen and mefenamic acid were removed in the PBR. In addition, toxicity tests showed that the laccase-based treatment resulted in a reduction in toxicity to Daphnia magna. The treated HWW did not significantly affect the mobility of Daphnia magna, unlike untreated HWW.

Development and optimization of a silica-bound laccase biocatalyst and its application in hospital wastewater treatment

Laccase from Trametes hirsuta was immobilized on amino-functionalized silica by adsorption and covalent binding using glutaraldehyde (GLA) and glyoxal (GLX) as cross-linkers. The immobilization process was optimized applying the Box-Behnken methodology. The immobilized biocatalysts were characterized using scanning electron microscopy, Brunauer-Emmett-Teller surface area and Barrett-Joyner-Halenda pore size analyses, and elemental analysis. Covalent immobilization proved to be better than adsorption based on the specific activity, immobilization yield, and stability in hospital wastewater (HWW) of the biocatalysts. The biocatalyst prepared using GLA under optimized conditions (laccase loading: 10 kU/L, pH 5, temperature: 5 °C, immobilization time: 8 h, and GLA amount: 100 mM) demonstrated better stability to pH, temperature, and other denaturants, compared to free laccase. It exhibited good catalytic potential to remove phenolic compound acetaminophen (83%) and other trace organic contaminants (TrOCs) such as mefenamic acid (86%), indomethacin (73%), carbamazepine (62%), ibuprofen (43%), naproxen (37%), and ketoprofen (27%), in a mixture from a real non-treated hospital effluent spiked with 1 µg/L of each of the above compounds. In addition, the measured catalytic parameters (Km, kcat and kcat/Km) of acetaminophen (free laccase vs. immobilized laccase (AFHMS-GLA-Lac)) are relatively similar. This is one of the first evaluative studies on different immobilization strategies using the Box-Behnken optimization method to develop efficient and stable laccase biocatalysts by immobilization on amino-functionalized silica for real hospital wastewater treatment.

Oestrogen Detoxification Ability of White Rot Fungus Trametes hirsuta LE-BIN 072: Exoproteome and Transformation Product Profiling

White rot fungi, especially representatives of the genus Trametes spp. (Polyporaceae), are effective destructors of various xenobiotics, including oestrogens (phenol-like steroids), which are now widespread in the environment and pose a serious threat to the health of humans, animals and aquatic organisms. In this work, the ability of the white rot fungus Trametes hirsuta LE-BIN 072 to transform oestrone (E1) and 17β-oestradiol (E2), the main endocrine disruptors, was shown. More than 90% of the initial E1 and E2 were removed by the fungus during the first 24 h of transformation. The transformation process proceeded predominantly in the direction of the initial substrates' detoxification, with the radical oxidative coupling of E1 and E2 as well as their metabolites and the formation of less toxic dimers in various combinations. A number of minor metabolites, in particular, less toxic estriol (E3), were identified by HPLC-MS. The formation of E1 from E2 and vice versa were shown. The exoproteome of the white rot fungus during the transformation of oestrogens was studied in detail for the first time. The contribution of ligninolytic peroxidases (MnP5, MnP7 and VP2) to the process of the extracellular detoxification of oestrogens and their possible metabolites is highlighted. Thus, the studied strain appears to be a promising mycodetoxicant of phenol-like steroids in aquatic environments.

Microbial Immobilized Enzyme Biocatalysts for Multipollutant Mitigation: Harnessing Nature's Toolkit for Environmental Sustainability

The ever-increasing presence of micropollutants necessitates the development of environmentally friendly bioremediation strategies. Inspired by the remarkable versatility and potent catalytic activities of microbial enzymes, researchers are exploring their application as biocatalysts for innovative environmental cleanup solutions. Microbial enzymes offer remarkable substrate specificity, biodegradability, and the capacity to degrade a wide array of pollutants, positioning them as powerful tools for bioremediation. However, practical applications are often hindered by limitations in enzyme stability and reusability. Enzyme immobilization techniques have emerged as transformative strategies, enhancing enzyme stability and reusability by anchoring them onto inert or activated supports. These improvements lead to more efficient pollutant degradation and cost-effective bioremediation processes. This review delves into the diverse immobilization methods, showcasing their success in degrading various environmental pollutants, including pharmaceuticals, dyes, pesticides, microplastics, and industrial chemicals. By highlighting the transformative potential of microbial immobilized enzyme biocatalysts, this review underscores their significance in achieving a cleaner and more sustainable future through the mitigation of micropollutant contamination. Additionally, future research directions in areas such as enzyme engineering and machine learning hold immense promise for further broadening the capabilities and optimizing the applications of immobilized enzymes in environmental cleanup.

Valorizing fungal diversity for the degradation of fluoroquinolones

Continued widespread use of antibiotics, especially fluoroquinolones, raises environmental concerns, as its driving bacterial resistance and disrupts microbial ecosystems. Here we investigate the biodegradation of ten fluoroquinolone antibiotics (six for medical use and four for veterinary use) by ligninolytic fungi, including Trametes versicolor, Bjerkandera adusta, Porosterum spadiceum, Irpex lacteus, Pleuroteus ostreatus, Phanerochaete chrysosporium, Pycnoporus cinnabarinus, Ganoderma lucidum, and Gloeophyllum trabeum. The results show significant variations between strains in the efficiency of antibiotic transformation. B. adusta and P. spadiceum were the fungi that most efficiently reduced antibiotic concentrations and were able to totally degrade eight and six antibiotics, respectively, within a 15-day period. T. versicolor and P. ostreatus also showed the ability to effectively degrade antibiotics. Specifically, T. versicolor degraded six out of the ten fluoroquinolone antibiotics by more than 70 %, while P. ostreatus degraded the tested antibiotics between 43 % and 100 %. The remaining antibiotic activity did not always correlate with a reduction in antibiotic concentrations, which points to the presence of post-transformation antimicrobial metabolites. This study also explores the potential mechanisms used by these fungi to remove selected models of fluroquinolones via enzymatic routes, such as oxidation by laccases, heme-peroxidases, and cytochrome P450, or via adsorption on fungal biomass.

Insights in Pharmaceutical Pollution: The Prospective Role of eDNA Metabarcoding

Environmental pollution is a growing threat to natural ecosystems and one of the world's most pressing concerns. The increasing worldwide use of pharmaceuticals has elevated their status as significant emerging contaminants. Pharmaceuticals enter aquatic environments through multiple pathways related to anthropogenic activity. Their high consumption, insufficient waste treatment, and the incapacity of organisms to completely metabolize them contribute to their accumulation in aquatic environments, posing a threat to all life forms. Various analytical methods have been used to quantify pharmaceuticals. Biotechnology advancements based on next-generation sequencing (NGS) techniques, like eDNA metabarcoding, have enabled the development of new methods for assessing and monitoring the ecotoxicological effects of pharmaceuticals. eDNA metabarcoding is a valuable biomonitoring tool for pharmaceutical pollution because it (a) provides an efficient method to assess and predict pollution status, (b) identifies pollution sources, (c) tracks changes in pharmaceutical pollution levels over time, (d) assesses the ecological impact of pharmaceutical pollution, (e) helps prioritize cleanup and mitigation efforts, and (f) offers insights into the diversity and composition of microbial and other bioindicator communities. This review highlights the issue of aquatic pharmaceutical pollution while emphasizing the importance of using modern NGS-based biomonitoring actions to assess its environmental effects more consistently and effectively.

Genipin and glutaraldehyde based laccase two-layers immobilization with improved properties: New biocatalysts with high potential for enzymatic removal of trace organic contaminants

This research proposes the preparation of a two-layer laccase biocatalyst using genipin or/and glutaraldehyde as cross-linking agents. The multilayer biocatalysts were prepared using different combinations of genipin and glutaraldehyde in the individual preparation of the first and second laccase layers. First, chitosan was treated with genipin or glutaraldehyde, followed by the immobilization of the first laccase layer to form a single-layer biocatalyst. Then, the immobilized laccases were coated once again with genipin or glutaraldehyde, and a new laccase layer was immobilized onto the system, resulting in the final two-layer biocatalyst. Compared to the single-layer biocatalysts, catalytic activity increased 1.7- and 3.4-fold when glutaraldehyde coating was used to prepare the second laccase layer. However, adding a second layer did not always produce more active biocatalysts, since the two-layer biocatalysts prepared with genipin (GenLacGenLac and GluLacGenLac) presented a decrease in activity of 65% and 28%, respectively. However, these two-layer biocatalysts prepared with genipin maintained 100% of their initial activity after 5 cycles of ABTS oxidation. Nevertheless, the two-layer, genipin-coated biocatalyst resulted in a higher removal of trace organic contaminants, since it removed 100% of mefenamic acid and 66% of acetaminophen, compared with the glutaraldehyde-coated biocatalyst, which removed 20% of mefenamic acid, and 18% of acetaminophen.

Synthesis of magnetically recyclable porous cross-linked aggregates of Tramates versicolor MTCC 138 laccase for the efficient removal of pentachlorophenol from aqueous solution

The primary objective of this study is to synthesize the magnetically separable highly active porous immobilized laccase for the removal of pentachlorophenol (PCP) in an aqueous solution. Magnetic porous cross-linked enzyme aggregates (Mp-CLEAs) of laccase were synthesized using 1% starch solution with 5 mM glutaraldehyde followed by 10 h of cross-linking time with an activity recovery of 90.85 ± 0.2%. The biocatalytic efficiency of magnetic porous CLEAs (Mp-CLEAs) was 2-fold higher than that of magnetic CLEAs. The synthesized Mp-CLEAs were mechanically stable with enhanced catalytic efficiency, and reusability thus overcoming the mass transfer limitations and enzyme loss. At 40 °C, the thermal stability of the magnetic porous immobilized laccase was improved, with a 602 min half-life compared to 207 min half-life for the free enzyme. Using 40 U/mL of laccase for the removal of 100 ppm of PCP, M-CLEAs, and Mp-CLEAs removed 60.44% and 65.53% of PCP, respectively. Furthermore, to enhance PCP removal, a laccase-aided system was harnessed by optimizing various surfactants and mediators. Of these, 0.1 mM of rhamnolipid and 2,3 dimethoxy phenol had the highest PCP removal rates of 95.12% and 99.41%, respectively, for Mp-CLEAs. This study demonstrates the efficacy of the laccase-surfactant-mediator system for the removal of PCP from the aqueous solution, which can also be proposed for real-time application.

Practical and Rapid Membrane-Based Biosensor for Phenol Using Copper/Calcium-Enzyme Hybrid Nanoflowers

Phenol, a pollutant frequently found in chemical industries effluents, is highly toxic even in low concentrations. This study reports a green, simple, and rapid method for qualitative phenol biosensing using horseradish peroxidase (HRP) hybrid nanoflowers made with copper (Cu²⁺-hNF) or calcium (Ca²⁺-hNF) ions. The enzyme was immobilized through protein-inorganic self-assembly into hybrid structures and subsequently supported onto a polyvinylidene fluoride (PVDF) membrane. SEM, EDS, FTIR, and XRD techniques sustained the effective enzyme encapsulation into hybrid structures. The protein concentration in the structures was 0.25 mg.mL^-1 for both ions. The best temperature and pH were 60 °C and 7.4, respectively, for both hybrids and the free enzyme, suggesting that the immobilization did not affect the optimal conditions of the free HRP. Thermal stability from 25 to 70 °C and pH stability from 4.0 to 9.0 of the hybrids were also determined. Finally, using copper and calcium hybrids, both biosensors produced onto a PVDF membrane could detect phenol in concentrations ranging from 0.72 to 24.00 µmol.mL^-1 in 1 min. In contrast, control biosensors produced with free enzyme have not presented a visible color change in the same conditions. The findings suggest a promising application of the developed biosensors in functional phenol detection.

Feasibility and potential of laccase-based enzyme in wastewater treatment through sustainable approach: A review

The worldwide increase in metropolitan cities and rise in industrialization have resulted in the assimilation of hazardous pollutants into the ecosystems. Different physical, chemical and biological techniques have been employed to remove these toxins from water bodies. Several bioprocess applications using microbes and their enzymes are utilized to achieve the goal. Biocatalysts, such as laccases, are employed explicitly to deplete a variety of organic pollutants. However, the degradation of contaminants using biocatalysts has many disadvantages concerning the stability and activity of the enzyme. Hence, they are immobilized on different supports to improve the enzyme kinetics and recyclability. Furthermore, standard wastewater treatment methods are not effective in eliminating all the contaminants. As a result, membrane separation technologies have emerged to overcome the limitations of traditional wastewater treatment methods. Moreover, enzymes immobilized onto these membranes have generated new avenues in wastewater purification technology. This review provides the latest information on laccases from diverse sources, their molecular framework and their mode of action. This report also gives information about various immobilization techniques and the application of membrane bioreactors to eliminate and biotransform hazardous contaminants. In a nutshell, laccases appear to be the most promising biocatalysts for green and cost-efficient wastewater treatment technologies.

Recent advances in the utilization of immobilized laccase for the degradation of phenolic compounds in aqueous solutions: A review

Phenolic compounds such as phenol, bisphenol A, 2,4-dichlorophenol, 2,4-dinitrophenol, 4-chlorophenol and 4-nitrophenol are well known to be highly detrimental to both human and living beings. Thus, it is of critical importance that suitable remediation technologies are developed to effectively remove phenolic compounds from aqueous solutions. Biodegradation utilizing enzymatic technologies is a promising biotechnological solution to sustainably address the pollution in the aquatic environment as caused by phenolic compounds under a defined environmentally optimized strategy and thus should be investigated in great detail. This review aims to present the latest developments in the employment of immobilized laccase for the degradation of phenolic compounds in water. The review first succinctly delineates the fundamentals of biological enzyme degradation along with a critical discussion on the myriad types of laccase immobilization techniques, which include physical adsorption, ionic adsorption, covalent binding, entrapment, and self-immobilization. Then, this review presents the major properties of immobilized laccase, namely pH stability, thermal stability, reusability, and storage stability, as well as the degradation efficiencies and associated kinetic parameters. In addition, the optimization of the immobilized enzyme, specifically on laccase immobilization methods and multi-enzyme system are critically discussed. Finally, pertinent future perspectives are elucidated in order to significantly advance the developments of this research field to a higher level.

Coimmobilized enzymes as versatile biocatalytic tools for biomass valorization and remediation of environmental contaminants - A review

Due to stringent regulatory norms, waste processing faces confrontations and challenges in adapting technology for effective management through a convenient and economical system. At the global level, attempts are underway to achieve a green and sustainable treatment for the valorization of lignocellulosic biomass as well as organic contaminants in wastewater. Enzymatic treatment in the environmental aspect thrived on being the promising rapid strategy that appeased the aforementioned predicament. On that account, coimmobilization of various enzymes on single support enhances the catalytic activity ensuing operational stability with industrial applications. This review pivoted towards the coimmobilization of enzymes on diverse supports and their applications in biomass conversion to industrial value-added products and removal of contaminants in wastewater. The limelight of this study chronicles the unique breakthroughs in biotechnology for the production of reusable biocatalysts, which inculcating various enzymes towards the scope of environment application.

Antibiotic resistance in the aquatic environment: Analytical techniques and interactive impact of emerging contaminants

Antibiotic pollution is becoming an increasingly severe threat globally. Antibiotics have emerged as a new class of environmental pollutants due to their expanding usage and indiscriminate application in animal husbandry as growth boosters. Contamination of aquatic ecosystems by antibiotics can have a variety of negative impacts on the microbial flora of these water bodies, as well as lead to the development and spread of antibiotic-resistant genes. Various strategies for removing antibiotics from aqueous systems and environments have been developed. Many of these approaches, however, are constrained by their high operating costs and the generation of secondary pollutants. This review aims to summarize research on the distribution and effects of antibiotics in aquatic environments, their interaction with other emerging contaminants, and their remediation strategy. The ecological risks associated with antibiotics in aquatic ecosystems and the need for more effective monitoring and detection system are also highlighted.

Bioremoval and Detoxification of the Anticancer Drug Mitoxantrone Using Immobilized Crude Versatile Peroxidase (icVP/Ba) Bjerkandera adusta CCBAS 930

The aim of this study was to evaluate the biodecolorization and detoxification of the anticancer drug mitoxantron (MTX) by immobilized crude versatile peroxidase of Bjerkandera adusta CCBAS 930 (icVP/Ba). The concentrated crude VP was obtained from B. adusta CCBAS 930 culture on medium with MTX (µg/mL) addition, immobilized with 4% sodium alginate. MTX removal degree (decolorization), levels of phenolic compounds and free radicals were determined during MTX biotransformation. Moreover, the phytotoxicity (Lepidium sativum L.), biotoxicity (multi-species microbial assay, MARA), and genotoxicity (SOS Chromotest) of MTX were evaluated before and after the biological treatment. The use of icVP/Ba (95 U/mL) significantly shortened the bioremoval of 10 µg/mL MTX (95.57% after 72 h). MTX removal by icVP/Ba was correlated with an 85% and 90% decrease in the levels of phenolic compounds and free radicals, respectively. In addition, the use of icVP/Ba contributed to a decrease in the phyto-, bio-, and genotoxicity of MTX. This is the first study to describe the possibility of removing MTX using immobilized crude fungal peroxidase.

Biological oxidation methods for the removal of organic and inorganic contaminants from wastewater: A comprehensive review

Enzyme-based bioremediation is a simple, cost-effective, and environmentally friendly method for isolating and removing a wide range of environmental pollutants. This study is a comprehensive review of recent studies on the oxidation of pollutants by biological oxidation methods, performed individually or in combination with other methods. The main bio-oxidants capable of removing all types of pollutants, such as organic and inorganic molecules, from fungi, bacteria, algae, and plants, and different types of enzymes, as well as the removal mechanisms, were investigated. The use of mediators and modification methods to improve the performance of microorganisms and their resistance under harsh real wastewater conditions was discussed, and numerous case studies were presented and compared. The advantages and disadvantages of conventional and novel immobilization methods, and the development of enzyme engineering to adjust the content and properties of the desired enzymes, were also explained. The optimal operating parameters such as temperature and pH, which usually lead to the best performance, were presented. A detailed overview of the different combination processes was also given, including bio-oxidation in coincident or consecutive combination with adsorption, advanced oxidation processes, and membrane separation. One of the most important issues that this study has addressed is the removal of both organic and inorganic contaminants, taking into account the actual wastewaters and the economic aspect.

Artificial microbial consortium producing oxidases enhanced the biotransformation efficiencies of multi-antibiotics

Antibiotic mixtures in the environment result in the development of bacterial strains with resistance against multiple antibiotics. Oxidases are versatile that can bio-remove antibiotics. Various laccases (LACs), manganese peroxidases (MNPs), and versatile peroxidase (VP) were reconstructed in Pichia pastoris. For the single antibiotics, over 95.0% sulfamethoxazole within 48 h, tetracycline, oxytetracycline, and norfloxacin within 96 h were bio-removed by recombinant VP with α-signal peptide, respectively. In a mixture of the four antibiotics, 80.2% tetracycline and 95.6% oxytetracycline were bio-removed by recombinant MNP2 with native signal peptide (NSP) within 8 h, whereas < 80.0% sulfamethoxazole was bio-removed within 72 h, indicating that signal peptides significantly impacted removal efficiencies of antibiotic mixtures. Regarding mediators for LACs, 2,2'-azino-bis-(3-ethylbenzothiazoline-6-sulfonic acid) resulted in better removal efficiencies of multi-antibiotic mixtures than 1-hydroxybenzotriazole or syringaldehyde. Furthermore, artificial microbial consortia (AMC) producing LAC2 and MNP2 with NSP significantly improved bio-removal efficiency of sulfamethoxazole (95.5%) in four-antibiotic mixtures within 48 h. Tetracycline and oxytetracycline were completely bio-removed by AMC within 48 and 72 h, respectively, indicating that AMC accelerated sulfamethoxazole, tetracycline, and oxytetracycline bio-removals. Additionally, transformation pathways of each antibiotic by recombinant oxidases were proposed. Taken together, this work provides a new strategy to simultaneously remove antibiotic mixtures by AMC.

Glucose Fuel Cells and Membranes: A Brief Overview and Literature Analysis

Glucose is a ubiquitous source of energy for nearly all living things, and glucose fuel cells (GFCs) are regarded as a sustainable power source because glucose is renewable, easily available, cheap, abundant, non-toxic and easy-to-store. Numerous efforts have been devoted to developing and improving GFC performance; however, there is still no commercially viable devices on the market. Membranes play an essential role in GFCs for the establishment of a suitable local microenvironment, selective ion conducting and prevention of substrate crossover. However, our knowledge on them is still limited, especially on how to achieve comparable efficacy with that of a biological system. This review article provides the first brief overview on these aspects, particularly keeping in sight the research trends, current challenges, and the future prospects. We aim to bring together literature analysis and technological discussion on GFCs and membranes by using bibliometrics, and provide new ideas for researchers in this field to overcome challenges on developing high-performance GFCs.

Insolubilization of Tramates versicolor laccase as cross-linked enzyme aggregates for the remediation of trace organic contaminants from municipal wastewater

The novelty of this study deals with the biocatalytic treatment of trace organic contaminants (TrOCs) from municipal wastewater by insolubilized laccase. Laccase from Trametes versicolor was aggregated by three-phase partitioning technique followed by cross-linking with glutaraldehyde to produce insolubilized laccase as cross-linked enzyme aggregates (CLEAs). The optimal conditions for CLEAs preparation include ammonium sulphate concentration of 83% (w/v), crude to t-butanol ratio of 1.00: 1.05 (v/v), pH 5.3, and glutaraldehyde concentration of 20 mM obtained via statistical design. The efficiency of insolubilization of the CLEAs laccase based on the k_cat/k_m ratio was approximately 4.8-fold greater than that of free laccase. The developed CLEAs showed greater resistance to product inhibition mediated by ABTS than the free enzyme and exhibited excellent catalytic activity even after the tenth successive cycle. Further, free laccase and the synthesized CLEAs laccase were utilized to treat five analgesics, two NSAIDS, three antibiotics, two antilipemics, and three pesticides in the municipal wastewater. Under the batch process with operating conditions of pH 7.0 and 20 °C, 1000 U/L of CLEAs, laccase removed 11 TrOCs in the range of about 20-99%. However, the inactivated CLEAs only adsorbed 2-25% of TrOCs. It was observed that acetaminophen, mefenamic acid, trimethoprim, and metolachlor depicted almost complete removal with CLEAs laccase. The performance of CLEAs laccase in a perfusion basket reactor was tested for the removal of TrOCs from municipal wastewater.

Impact of Pharmaceutical Compounds in the Bioremediation of Municipal Biosolids by the White-Rot-Fungi Trametes hirsuta

The potential of microorganisms for the treatment of municipal biosolids is continuously growing. The present studies evaluated the potency of Trametes hirsuta for the reduction in biosolid mass, production of extracellular enzymes, and removal of pharmaceutical compounds (PhACs) in biosolid slurry in the presence and absence of spiked PhACs [5 non-steroidal anti-inflammatories (NSAIs) and 2 psychoactive compounds (PACs)]. Toxicity after 35 days of fungal treatment was also assessed. Results showed that the growth of T. hirsuta is limited above 25% and wholly inhibited above 50% of biosolids in the slurry. At 12% of biosolid concentration, biosolid mass was reduced by 90%, NSAIs were entirely removed, but PACs' removal was only ~20%. Increasing biosolid content to 25% did not markedly affect biosolid reduction but significantly enhanced the removal of PACs (>50%). Results also showed that both PhACs and biosolids induced the production of oxidative enzymes. In 12% biosolids in the slurry, the oxidative potential measured by the ABTS assay (OABTS) reached 5,000 mM of OABTS in the presence of PhACs, and 2,500 mM of OABTS without PhACs, as compared to 1,200 mM of OABTS in control culture. Finally, we report that white rot fungi (WRF) treatment significantly decreased the toxicity of the biosolids.

Mycoremediation of lignocellulosic biorefinery sludge: A reinvigorating approach for organic contaminants remediation with simultaneous production of lignocellulolytic enzyme cocktail

This research work aims to valorize lignocellulosic biorefinery sludge with genetically engineered Trichoderma atroviride for simultaneous removal of organic contaminants, fermentation inhibitors, and lignocellulolytic enzyme cocktail production. Upon analysis, three phenolic compounds (42.6 ± 3.6 μg/g), two polycyclic aromatic hydrocarbons (0.42 ± 0.06 μg/g) and five fermentation inhibitors (2.5 ± 0.3 mg/g) were detected in the sludge. Bioaugmentation of sludge with 72 h-old T. atroviride (5%) results in the production of cellulase (21 U/g), xylanase (84 U/g), laccase (20 U/g), lignin peroxidase (14 U/g) and aryl alcohol oxidase (116 U/g), along with the concomitant removal of organic contaminants (phenol, 2, 4-dinitrophenol, pentchlorophenol, phenanthrene, benzo(a)pyrene) and fermentation inhibitors (furfural, 5-hydroxymethylfurfural, levulinic acid, ferulic acid, and catechol). Subsequently, the enrichment of sludge with nutrients and rhamnolipids enhanced the enzyme production by 5-6-fold and resulted in the removal of 85-95% of organic contaminants and fermentation inhibitors, which constitutes an eco-friendly process.

Carrier-Free Cross-linked Laccase Crystals for Biocatalytic Degradation of Textile Industrial Effluents

Herein, laccase from Trametes versicolor was used to fabricate carrier-free cross-linked laccase crystals (CLLCs) and deployed as a robust catalyst for waste effluent treatment. The surface morphology and involvement of functional group attributes of CLLCs were scrutinized by scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FTIR). As fabricated CLLCs were subjected to kinetic characterization by assessing the effects of pH environment, thermal profile, and substrate (determination of Km and Vmax) on the activity. A fully characterized CLLCs fraction was used to treat synthetic dyes containing waste effluents taken from various industries, i.e., Chenab Textile Industry, M-tax, Sitara, and National Silk & Rayon Mills. Degradation profile revealed 36.8%, 27.6%, 39.9%, and 26.4% degradation of Chenab Textile Industry, M-tax, Sitara, and National Silk & Rayon Mills, respectively, by the free form of laccase, whereas the biocatalytic activity of CCLCs led to 78.6%, 75.6%, 85.5%, and 63.3% degradation of those effluents. The decrease in peak and mass region alongside the presence of new peaks in GC-MS affirms the effective decolorization of contaminated waste effluents. CLLCs retained over 70% and 50% of their degradation activity after 3 and 5 cycles, respectively. In conclusion, CLLCs might represent a robust bioprocess to improve the usability of laccase for various synthetic dyes containing waste effluents to diminish environmental pollution from the dye-based industries.

Immobilized fungal enzymes: Innovations and potential applications in biodegradation and biosynthesis

Microbial enzymes catalyze various reactions inside and outside living cells. Among the widely studied enzymes, fungal enzymes have been used for some of the most diverse purposes, especially in bioremediation, biosynthesis, and many nature-inspired commercial applications. To improve their stability and catalytic ability, fungal enzymes are often immobilized on assorted materials, conventional as well as nanoscale. Recent advances in fungal enzyme immobilization provide effective and sustainable approaches to achieve improved environmental and commercial outcomes. This review aims to provide a comprehensive overview of commonly studied fungal enzymes and immobilization technologies. It also summarizes recent advances involving immobilized fungal enzymes for the degradation or assembly of compounds used in the manufacture of products, such as detergents, food additives, and fossil fuel alternatives. Furthermore, challenges and future directions are highlighted to offer new perspectives on improving existing technologies and addressing unexplored fields of applications.

Laccase-Driven Transformation of High Priority Pesticides Without Redox Mediators: Towards Bioremediation of Contaminated Wastewaters

In this study, Pleurotus dryinus was grown on municipal biosolids (BS) as the substrate to produce laccase for the removal of pesticides (fungicides, herbicides, and insecticides) from wastewater. Among the various types of BS tested, sterilized biosolids were the most promising substrate for laccase production by P. dryinus with a maximal laccase activity (162.1 ± 21.1 U/g dry substrate), followed by hygenized biosolids (96.7 ± 17.6 U/g dry substrate), unsterilized biosolids (UBS) (31.9 ± 1.2 U/g dry substrate), and alkali-treated biosolids (8.2 ± 0.4 U/g dry substrate). The ultrasound-assisted extraction of this enzyme from fermented UBS was carried out with 0.1 M phosphate buffer at pH 7.0, which increased the enzyme activity of the crude extract by 30%. To test the catalytic potential of the biocatalyst in real matrices, 1 U/ml of recovered crude laccase extract was applied for 24 h for the removal of 29 pesticides (nine fungicides, 10 herbicides, and 10 insecticides) either separately or as a mixture from spiked biologically treated wastewater effluent. When treated with crude enzyme extract, high-priority herbicides metolachlor and atrazine were completely removed, while 93%–97% of the insecticides aldicarb, spinosad, and azinphos-methyl and up to 91% of kresoxim-methyl were removed. Promising results were obtained with BS-derived crude enzyme extract exhibiting improved pesticides removal, which may be due to the mediator effect resulting from the catalytic transformation of other molecules in the cocktail. The results demonstrated a promising integrated bioprocess for the removal of pesticides in wastewater using crude laccase obtained from BS.

Peroxidase enzymes as green catalysts for bioremediation and biotechnological applications: A review

The fast-growing consumer demand drives industrial process intensification, which subsequently creates a significant amount of waste. These products are discharged into the environment and can affect the quality of air, degrade water streams, and alter soil characteristics. Waste materials may contain polluting agents that are especially harmful to human health and the ecosystem, such as the synthetic dyes, phenolic agents, polycyclic aromatic hydrocarbons, volatile organic compounds, polychlorinated biphenyls, pesticides and drug substances. Peroxidases are a class oxidoreductases capable of performing a wide variety of oxidation reactions, ranging from reactions driven by radical mechanisms, to oxygen insertion into CH bonds, and two-electron substrate oxidation. This versatility in the mode of action presents peroxidases as an interesting alternative in cleaning the environment. Herein, an effort has been made to describe mechanisms governing biochemical process of peroxidase enzymes while referring to H₂O₂/substrate stoichiometry and metabolite products. Plant peroxidases including horseradish peroxidase (HRP), soybean peroxidase (SBP), turnip and bitter gourd peroxidases have revealed notable biocatalytic potentialities in the degradation of toxic products. On the other hand, an introduction on the role played by ligninolytic enzymes such as manganese peroxidase (MnP) and lignin peroxidase (LiP) in the valorization of lignocellulosic materials is addressed. Moreover, sensitivity and selectivity of peroxidase-based biosensors found use in the quantitation of constituents and the development of diagnostic kits. The general merits of peroxidases and some key prospective applications have been outlined as concluding remarks.

Recent Developments in the Immobilization of Laccase on Carbonaceous Supports for Environmental Applications - A Critical Review

Τhe ligninolytic enzyme laccase has proved its potential for environmental applications. However, there is no documented industrial application of free laccase due to low stability, poor reusability, and high costs. Immobilization has been considered as a powerful technique to enhance laccase's industrial potential. In this technology, appropriate support selection for laccase immobilization is a crucial step since the support could broadly affect the properties of the resulting catalyst system. Through the last decades, a large variety of inorganic, organic, and composite materials have been used in laccase immobilization. Among them, carbon-based materials have been explored as a support candidate for immobilization, due to their properties such as high porosity, high surface area, the existence of functional groups, and their highly aromatic structure. Carbon-based materials have also been used in culture media as supports, sources of nutrients, and inducers, for laccase production. This study aims to review the recent trends in laccase production, immobilization techniques, and essential support properties for enzyme immobilization. More specifically, this review analyzes and presents the significant benefits of carbon-based materials for their key role in laccase production and immobilization.

Reversible immobilization of laccase onto glycopolymer microspheres via protein-carbohydrate interaction for biodegradation of phenolic compounds

It is challenging to regenerate enzyme carriers when covalently immobilized enzymes suffered from inactivation during continuous operations. Hence, it is urgent to develop a facile strategy to immobilize enzymes reversibly. Herein, the non-covalent interaction between protein and carbohydrate was used to adsorb and desorb enzymes reversibly. Laccase was immobilized onto glycopolymer microspheres via protein-carbohydrate interaction using lectins as the intermediates. The enzyme loading and immobilization yield were up to 49 mg/g and 77.1% with highly expressed activity of 107.9 U/mg. The immobilized laccase exhibited enhanced pH stability and high activity in catalyzing the biodegradation of paracetamol. During ten successive recoveries, the immobilized laccases could be recycled while maintaining relatively high enzyme activity. The glycopolymer microspheres could be efficiently regenerated by elution with an aqueous solution of mannose or acid for further enzyme immobilization. This glycopolymer microspheres has excellent potential to act as reusable carriers for the non-covalent immobilization of different enzymes.

A Review on Emerging Pollutants in the Water Environment: Existences, Health Effects and Treatment Processes

Emerging pollutants (EPs), also known as micropollutants, have been a major issue for the global population in recent years as a result of the potential threats they bring to the environment and human health. Pharmaceuticals and personal care products (PPCPs), antibiotics, and hormones that are used in great demand for health and cosmetic purposes have rapidly culminated in the emergence of environmental pollutants. EPs impact the environment in a variety of ways. EPs originate from animal or human sources, either directly discharged into waterbodies or slowly leached via soils. As a result, water quality will deteriorate, drinking water sources will be contaminated, and health issues will arise. Since drinking water treatment plants rely on water resources, the prevalence of this contamination in aquatic environments, particularly surface water, is a severe problem. The review looks into several related issues on EPs in water environment, including methods in removing EPs. Despite its benefits and downsides, the EPs treatment processes comprise several approaches such as physico-chemical, biological, and advanced oxidation processes. Nonetheless, one of the membrane-based filtration methods, ultrafiltration, is considered as one of the technologies that promises the best micropollutant removal in water. With interesting properties including a moderate operating manner and great selectivity, this treatment approach is more popular than conventional ones. This study presents a comprehensive summary of EP’s existence in the environment, its toxicological consequences on health, and potential removal and treatment strategies.

Enzyme polymer engineered structure strategy to enhance cross-linked enzyme aggregate stability: a step forward in laccase exploitation for cannabidiol removal from wastewater

Despite all its advantages and potential, cross-linking enzyme aggregate (CLEA) technology is still not applied at an industrial scale for enzyme insolubilization for bioremediation purposes. In this study, the enzyme polymer engineered structure (EPES) method was used to enhance CLEA stability and reuse. A crude laccase from Trametes hirsuta was successfully insolubilized to form EPES-CLEAs. The polymeric network provided excellent stability (> 90%) to CLEAs after a 24-h incubation in a non-buffered municipal wastewater effluent (WW), and the biocatalysts were recycled using a centrifugation process. While CLEAs activity dropped to 17%, EPES-CLEAs showed a laccase activity retention of 67% after five cycles of 2,2'-azino-bis (3-ethylbenzthiazoline-6-sulfonic acid) (ABTS) oxidation. After 8 h of treatment in WW, the EPES-CLEAs were equally as effective in removing cannabidiol (CBD) as the free-LAC (~ 37%). This research demonstrates that the EPES method is a promising alternative for CLEA stabilization and reuse in environmental conditions.

A comprehensive insight into the application of white rot fungi and their lignocellulolytic enzymes in the removal of organic pollutants

Environmental problems resultant from organic pollutants are a major current challenge for modern societies. White rot fungi (WRF) are well known for their extensive organic compound degradation abilities. The unique oxidative and extracellular ligninolytic systems of WRF that exhibit low substrate specificity, enable them to display a considerable ability to transform or degrade different environmental contaminants. In recent decades, WRF and their ligninolytic enzymes have been widely applied in the removal of polycyclic aromatic hydrocarbons (PAHs), pharmaceutically active compounds (PhACs), endocrine disruptor compounds (EDCs), pesticides, synthetic dyes, and other environmental pollutants, wherein promising results have been achieved. This review focuses on advances in WRF-based bioremediation of organic pollutants over the last 10 years. We comprehensively document the application of WRF and their lignocellulolytic enzymes for removing organic pollutants. Moreover, potential problems and intriguing observations that are worthy of additional research attention are highlighted. Lastly, we discuss trends in WRF-remediation system development and avenues that should be considered to advance research in the field.

Build Your Own Mushroom Soil: Microbiota Succession and Nutritional Accumulation in Semi-Synthetic Substratum Drive the Fructification of a Soil-Saprotrophic Morel

Black morel, a widely prized culinary delicacy, was once an uncultivable soil-saprotrophic ascomycete mushroom that can now be cultivated routinely in farmland soils. It acquires carbon nutrients from an aboveground nutritional supplementation, while it remains unknown how the morel mycelium together with associated microbiota in the substratum metabolizes and accumulates specific nutrients to support the fructification. In this study, a semi-synthetic substratum of quartz particles mixed with compost was used as a replacement and mimic of the soil. Two types of composts (C1 and C2) were used, respectively, plus a bare-quartz substratum (NC) as a blank reference. Microbiota succession, substrate transformation as well as the activity level of key enzymes were compared between the three types of substrata that produced quite divergent yields of morel fruiting bodies. The C1 substratum, with the highest yield, possessed higher abundances of Actinobacteria and Chloroflexi. In comparison with C2 and NC, the microbiota in C1 could limit over-expansion of microorganisms harboring N-fixing genes, such as Cyanobacteria, during the fructification period. Driven by the microbiota, the C1 substratum had advantages in accumulating lipids to supply morel fructification and maintaining appropriate forms of nitrogenous substances. Our findings contribute to an increasingly detailed portrait of microbial ecological mechanisms triggering morel fructification.

Magnetic micro-macro biocatalysts applied to industrial bioprocesses

The use of magnetic biocatalysts is highly beneficial in bioprocesses technology, as it allows their easy recovering and enhances biocatalyst lifetime. Thus, it simplifies operational processing and increases efficiency, leading to more cost-effective processes. The use of small-size matrices as carriers for enzyme immobilization enables to maximize surface area and catalysts loading, also reducing diffusion limitations. As highly expensive nanoparticles (nm size) usually aggregate, their application at large scale is not recommended. In contrast, the use of magnetic micro-macro (µm-mm size) matrices leads to more homogeneous biocatalysts with null or very low aggregation, which facilitates an easy handling and recovery. The present review aims to highlight recent trends in the application of medium-to-high size magnetic biocatalysts in different areas (biodiesel production, food and pharma industries, protein purification or removal of environmental contaminants). The advantages and disadvantages of these above-mentioned magnetic biocatalysts in bioprocess technology will be also discussed.

Imidazole-rich copper peptides as catalysts in xenobiotic degradation

Laccases, oxidative copper-enzymes found in fungi and bacteria were used as the basis in the design of nona- and tetrapeptides. Laccases are known to be excellent catalysts for the degradation of phenolic xenobiotic waste. However, since solvent extraction of laccases is environmentally-unfriendly and yields obtained are low, they are less preferred compared to synthetic catalysts. The histidine rich peptides were designed based on the active site of laccase extracted from Trametes versicolor through RCSB Protein Data Bank, LOMETS and PyMol software. The peptides were synthesized using Fmoc-solid phase peptide synthesis (SPPS) with 30-40% yield. These peptides were purified and characterized using LC-MS (purities >75%), FTIR and NMR spectroscopy. Synthesized copper(II)-peptides were crystallized and then analyzed spectroscopically. Their structures were elucidated using 1D and 2D NMR. Standards (o,m,p-cresol, 2,4-dichlorophenol) catalysed using laccase from Trametes versicolor (0.66 U/mg) were screened under different temperatures and stirring rate conditions. After optimizing the degradation of the standards with the best reaction conditions reported herein, medications with phenolic and aromatic structures such as ibuprofen, paracetamol (acetaminophen), salbutamol, erythromycin and insulin were screened using laccase (positive control), apo-peptides and copper-peptides. Their activities evaluated using GC-MS, were compared with those of peptide and copper-peptide catalysts. The tetrapeptide was found to have the higher degradation activity towards salbutamol (96.8%) compared with laccase at 42.8%. Ibuprofen (35.1%), salbutamol (52.9%) and erythromycin (49.7%) were reported to have the highest degradation activities using Cu-tetrapeptide as catalyst when compared with the other medications. Consequently, o-cresol (84%) was oxidized by Tp-Cu while the apo-peptides failed to oxidize the cresols. Copper(II)-peptides were observed to have higher catalytic activity compared to their parent peptides and the enzyme laccase for xenobiotic degradation.

Transcriptomic analysis of polyaromatic hydrocarbon degradation by the halophilic fungus Aspergillus sydowii at hypersaline conditions

Polycyclic aromatic hydrocarbons (PAHs) are among the most persistent xenobiotic compounds, with high toxicity effects. Mycoremediation with halophilic Aspergillus sydowii was used for their removal from a hypersaline medium (1 M NaCl). A. sydowii metabolized PAHs as sole carbon sources, resulting in the removal of up to 90% for both PAHs [benzo [a] pyrene (BaP) and phenanthrene (Phe)] after 10 days. Elimination of Phe and BaP was almost exclusively due to biotransformation and not adsorption by dead mycelium and did not correlate with the activity of lignin modifying enzymes (LME). Transcriptomes of A. sydowii grown on PAHs, or on glucose as control, both at hypersaline conditions, revealed 170 upregulated and 76 downregulated genes. Upregulated genes were related to starvation, cell wall remodelling, degradation and metabolism of xenobiotics, DNA/RNA metabolism, energy generation, signalling and general stress responses. Changes of LME expression levels were not detected, while the chloroperoxidase gene, possibly related to detoxification processes in fungi, was strongly upregulated. We propose that two parallel metabolic pathways (mitochondrial and cytosolic) are involved in degradation and detoxification of PAHs in A. sydowii resulting in intracellular oxidation of PAHs. To the best of our knowledge, this is the most comprehensive transcriptomic analysis on fungal degradation of PAHs.

Crosslinked Enzyme Aggregates (CLEAs) of Laccases from Pleurotus citrinopileatus Induced in Olive Oil Mill Wastewater (OOMW)

The enzymatic factory of ligninolytic fungi has proven to be a powerful tool in applications regarding the degradation of various types of pollutants. The degradative potential of fungi is mainly due to the production of different types of oxidases, of which laccases is one of the most prominent enzymatic activities. In the present work, crude laccases from the supernatant of Pleurotus citrinopileatus cultures grown in olive oil mill wastewater (OOMW) were immobilized in crosslinked enzyme aggregates (CLEAs), aiming at the development of biocatalysts suitable for the enzymatic treatment of OOMW. The preparation of laccase CLEAs was optimized, resulting in a maximum of 72% residual activity. The resulting CLEAs were shown to be more stable in the presence of solvents and at elevated temperatures compared to the soluble laccase preparation. The removal of the phenolic component of OOMW catalyzed by laccase-CLEAs exceeded 35%, while they were found to retain their activity for at least three cycles of repetitive use. The described CLEAs can be applied for the pretreatment of OOMW, prior to its use for valorization processes, and thus, facilitate its complete biodegradation towards a consolidated process in the context of circular economy.

Overview of Recent Advances in Immobilisation Techniques for Phenol Oxidases in Solution

Over the past two decades, phenol oxidases, particularly laccases and tyrosinases, have been extensively used for the removal of numerous pollutants in wastewaters due to their broad substrate specificity and their ability to use readily accessible molecular oxygen as the essential cofactor. As for other enzymes, immobilisation of laccases and tyrosinases has been shown to improve the performance and efficiency of the biocatalysts in solution. Several reviews have addressed the enzyme immobilisation techniques and the application of phenol oxidases to decontaminate wastewaters. This paper offers an overview of the recent publications, mainly from 2012 onwards, on the various immobilisation techniques applied to laccases and tyrosinases to induce and/or increase the performance of the biocatalysts. In this paper, the emphasis is on the efficiencies achieved, in terms of structural modifications, stability and resistance to extreme conditions (pH, temperature, inhibitors, etc.), reactivity, reusability, and broad substrate specificity, particularly for application in bioremediation processes. The advantages and disadvantages of several enzyme immobilisation techniques are also discussed. The relevance and effectiveness of the immobilisation techniques with respect to wastewater decontamination are critically assessed. A perspective on the future directions for large-scale application of the phenol oxidases in immobilised forms is provided.

Ecofriendly laccases treatment to challenge micropollutants issue in municipal wastewaters

In this study, a multidisciplinary approach investigated the enzymatic degradation of micropollutants in real, not modified, municipal wastewaters of a plant located in Italy. Stir Bar Sorptive Extraction combined to Gas Chromatography-Mass Spectrometric detection (SBSE-GC-MS) was applied to profile targeted pollutants in wastewaters collected after the primary sedimentation (W1) and the final effluent (W2). Fifteen compounds were detected at ng/L - μg/L, including pesticides, personal care products (PCPs) and drugs. The most abundant micropollutants were bis(2-ethylhexyl) phthalate, diethyl phthalate and ketoprofen. Laccases of Trametes pubescens MUT 2400 were very active against all the target micropollutants: except few cases, their concentration was reduced more than 60%. Chemical analysis and environmental risk do not always come together. To verify whether the treated wastewaters can represent a stressor for the aquatic ecosystem, toxicity was also evaluated. Raphidocelis subcapitata and Lepidium sativum tests showed a clear ecotoxicity reduction, even though they did not evenly respond. Two in vitro tests (E-screen test and MELN assay) were used to evaluate the estrogenic activity. Treatments already operating in the plant (e.g. activated sludge) partially reduced the estradiol equivalent concentration, and it was almost negligible after the laccases treatment. The results of this study suggest that laccases of T. pubescens are promising biocatalysts for the micropollutants transformation in wastewaters and surface waters.

Coupling and Regulation of Porous Carriers Using Plasma and Amination to Improve the Catalytic Performance of Glucose Oxidase and Catalase

Multiple enzyme systems are being increasingly used for their high-efficiency and co-immobilization is a key technology to lower the cost and improve the stability of enzymes. In this study, poly glycidyl methacrylate (PGMA) spheres were synthesized using suspension polymerization, and were used as a support to co-immobilize glucose oxidase (GOx) and catalase (CAT). Surface modification was carried out via a combination of plasma and amination to promote the properties of the catalyzer. The co-immobilized enzymes showed a more extensive range of optimum pH and temperature from 5.5 to 7.5 and 25 to 40°C, respectively, compared to free enzymes. Furthermore, the maximum activity and protein adsorption quantity of the co-immobilized enzymes reached 25.98 U/g and 6.07 mg/g, respectively. The enzymatic activity of the co-immobilized enzymes was maintained at ~70% after storage for 5 days and at 82% after three consecutive cycles, indicating that the immobilized material could be applied industrially.

Accelerating the Biodegradation of High-Density Polyethylene (HDPE) Using Bjerkandera adusta TBB-03 and Lignocellulose Substrates

High-density polyethylene (HDPE) is a widely used organic polymer and an emerging pollutant, because it is very stable and nonbiodegradable. Several fungal species that produce delignifying enzymes are known to be promising degraders of recalcitrant polymers, but research on the decomposition of plastics is scarce. In this study, white rot fungus, Bjerkandera adusta TBB-03, was isolated and characterized for its ability to degrade HDPE under lignocellulose substrate treatment. Ash (Fraxinus rhynchophylla) wood chips were found to stimulate laccase production (activity was > 210 U/L after 10 days of cultivation), and subsequently used for HDPE degradation assay. After 90 days, cracks formed on the surface of HDPE samples treated with TBB-03 and ash wood chips in both liquid and solid states. Raman analysis showed that the amorphous structure of HDPE was degraded by enzymes produced by TBB-03. Overall, TBB-03 is a promising resource for the biodegradation of HDPE, and this work sheds light on further applications for fungus-based plastic degradation systems.

Genetically Modified M13 Bacteriophage Nanonets for Enzyme Catalysis and Recovery

Enzyme-based biocatalysis exhibits multiple advantages over inorganic catalysts, including the biocompatibility and the unchallenged specificity of enzymes towards their substrate. The recovery and repeated use of enzymes is essential for any realistic application in biotechnology, but is not easily achieved with current strategies. For this purpose, enzymes are often immobilized on inorganic scaffolds, which could entail a reduction of the enzymes’ activity. Here, we show that immobilization to a nano-scaled biological scaffold, a nanonetwork of end-to-end cross-linked M13 bacteriophages, ensures high enzymatic activity and at the same time allows for the simple recovery of the enzymes. The bacteriophages have been genetically engineered to express AviTags at their ends, which permit biotinylation and their specific end-to-end self-assembly while allowing space on the major coat protein for enzyme coupling. We demonstrate that the phages form nanonetwork structures and that these so-called nanonets remain highly active even after re-using the nanonets multiple times in a flow-through reactor.

Unveiling of Concealed Processes for the Degradation of Pharmaceutical Compounds by Neopestalotiopsis sp

The presence of pharmaceutical products has raised emerging biorisks in aquatic environments. Fungi have been considered in sustainable approaches for the degradation of pharmaceutical compounds from aquatic environments. Soft rot fungi of the Ascomycota phylum are the most widely distributed among fungi, but their ability to biodegrade pharmaceuticals has not been studied as much as that of white rot fungi of the Basidiomycota phylum. Herein, we evaluated the capacity of the soft rot fungus Neopestalotiopsis sp. B2B to degrade pharmaceuticals under treatment of woody and nonwoody lignocellulosic biomasses. Nonwoody rice straw induced laccase activity fivefold compared with that in YSM medium containing polysaccharide. But B2B preferentially degraded polysaccharide over lignin regions in woody sources, leading to high concentrations of sugar. Hence, intermediate products from saccharification may inhibit laccase activity and thereby halt the biodegradation of pharmaceutical compounds. These results provide fundamental insights into the unique characteristics of pharmaceutical degradation by soft rot fungus Neopestalotiopsis sp. in the presence of preferred substrates during delignification.

Combi-CLEAs of Glucose Oxidase and Catalase for Conversion of Glucose to Gluconic Acid Eliminating the Hydrogen Peroxide to Maintain Enzyme Activity in a Bubble Column Reactor

In this study combined cross-linked aggregates of catalase from bovine liver and glucose-oxidase from Aspergillus niger were prepared, and the effects of the precipitant and crosslinking agents, as well as the use of bovine serum albumin (BSA) as a feeder protein, on enzyme immobilization yield and thermal stability of both enzymes, were evaluated. Combi- crosslinking of enzyme aggregates (CLEAs) prepared using dimethoxyethane as precipitant, 25 mM glutaraldehyde and BSA/enzymes mass ratio of 5.45 (w/w), exhibited the highest enzyme activities and stabilities at 40 °C, pH 6.0, and 250 rpm for 5 h. The stability of both immobilized enzymes was fairly similar, eliminating one of the problems of enzyme coimmobilization. Combi-CLEAs were used in gluconic acid (GA) production in a bubble column reactor operated at 40 °C, pH 6.0 and 10 vvm of aeration, using 26 g L−1 glucose as the substrate. Results showed conversion of around 96% and a reaction course very similar to the same process using free enzymes. The operational half-life was 34 h, determined from kinetic profiles and the first order inactivation model. Combi-CLEAs of glucose-oxidase and catalase were shown to be a robust biocatalyst for applications in the production of gluconic acid from glucose.

The Use of Algae and Fungi for Removal of Pharmaceuticals by Bioremediation and Biosorption Processes: A Review

The occurrence and fate of pharmaceuticals in the aquatic environment is recognized as one of the emerging issues in environmental chemistry. Conventional wastewater treatment plants (WWTPs) are not designed to remove pharmaceuticals (and their metabolites) from domestic wastewaters. The treatability of pharmaceutical compounds in WWTPs varies considerably depending on the type of compound since their biodegradability can differ significantly. As a consequence, they may reach the aquatic environment, directly or by leaching of the sludge produced by these facilities. Currently, the technologies under research for the removal of pharmaceuticals, namely membrane technologies and advanced oxidation processes, have high operation costs related to energy and chemical consumption. When chemical reactions are involved, other aspects to consider include the formation of harmful reaction by-products and the management of the toxic sludge produced. Research is needed in order to develop economic and sustainable treatment processes, such as bioremediation and biosorption. The use of low-cost materials, such as biological matrices (e.g., algae and fungi), has advantages such as low capital investment, easy operation, low operation costs, and the non-formation of degradation by-products. An extensive review of existing research on this subject is presented.