The chemical composition of ultrafine particles and associated biological effects at an alpine town impacted by wood burning

Exploring cooking fuel choices among Ghanaian women of reproductive age: A socio-economic analysis from a statistical mechanics perspective

Access to clean and efficient cooking fuel is crucial for promoting good health, safeguarding the environment, and driving economic growth. Despite efforts to promote the adoption of cleaner alternatives, traditional solid fuels such as charcoal and firewood remain prevalent in Ghana. In this study, we utilized a statistical mechanical model as a framework to explore the statistical relationship between socio-economic factors such as educational attainment, wealth status, place of residence, and cooking fuel choices. We analysed data from the Ghana Malaria Indicator Survey (GMIS) conducted in 2019, involving a total of 2,942 women of reproductive age. The findings revealed that 13.77% of participants preferred using LPG fuels for cooking, while 86.23% preferred non-LPG fuels for their cooking needs. The data indicated that among LPG users, 96.54% are educated women of reproductive age, and 3.46% are non-educated women of reproductive age. Among these, 95.31% are non-poor, and 4.69% are poor. Additionally, 21.73% reside in rural areas, while 78.27% live in urban areas. The data also showed that among non-LPG fuel users, 68.70% are educated women of reproductive age, and 31.30% are non-educated women of reproductive age. Among this group, 16.04% are non-poor, and 83.96% are poor. Furthermore, 67.24% reside in rural areas, and 32.76% live in urban areas. Our findings showed that in the absence of social interaction, a woman's wealth status has a relationship to her choice of fuel for cooking. Additionally, women of reproductive age in rural areas with some education demonstrated a significant private incentive (40.12%) to use LPG, implying a positive correlation between education and the use of LPG for cooking. However, when social interactions are considered, factors such as education, wealth status, and place of residence have significant relationships with a woman's decision about fuel choice. The interaction strength among women of reproductive age in urban areas with some education shows a negative estimate (-4.06%), suggesting that there is no significant imitative effect. The study further suggests that urban women of reproductive age who are poor exert a greater influence on their urban counterparts who are not poor when social interaction is incorporated. Women of reproductive age in rural areas with some form of education exert a greater influence on women of reproductive age in rural areas with no form of education. We recommend that the government of Ghana and its stakeholders focus on leveraging the influence of urban poor women and educated rural women through community-led programs and educational campaigns. Financial support mechanisms like microfinance and subsidies, alongside reliable LPG infrastructure, can make access easier for these target groups. Tailored communication strategies, peer-to-peer learning, and collaboration with local institutions are crucial for spreading awareness and encouraging the adoption of LPG.

Assessment of the Physicochemical Properties of Ultrafine Particles (UFP) from Vehicular Emissions in a Commercial Parking Garage: Potential Health Implications

Vehicular emissions are a major culprit in the rise of urban air pollution. The particulate matter (PM) emitted from vehicular sources includes primarily ultrafine particles (UFPs) with aerodynamic diameters less than 0.1 µm (PM0.1) and is linked to adverse respiratory and cardiovascular health effects. Despite this knowledge, few exposure assessment studies exist that detail the physicochemical properties of PM in parking garages. In this study, airborne PM emitted by vehicles in a parking garage of a hospital in New Jersey was sampled, during winter and summer seasons, and physicochemically characterized. The results indicate that the mass concentrations of the UFPs in the garage were 2.51 µg/m3 and 3.59 µg/m3, respectively. These UFPs contained a large percentage of elemental carbon and toxic elements. They also contained polycyclic aromatic hydrocarbons (PAHs), having deleterious health effects. An inhalation particle modeling revealed that 23.61% of these UFPs are deposited in the pulmonary region of the lung, translating to a dose of 10.67 µg for winter and 15.25 µg for summer, over a typical 40 h work week. These high deposited levels of UFPs and their complex chemistry levels further warrant the need for toxicological assessment of UFPs related to vehicular emissions.

Toxicological evaluation of primary particulate matter emitted from combustion of aviation fuel

Recently, Sustainable Aviation Fuel (SAF) blends and novel combustion technologies have been introduced to reduce aircraft engine emissions. However, there is limited knowledge about the impact of combustion technology and fuel composition on toxicity of primary Particulate Matter (PM) emissions, comparable to regulated non-volatile PM (nvPM). In this study, primary PM was collected on filters using a standardised approach, from both a Rich-Quench-Lean (RQL) combustion rig and a bespoke liquid fuelled Combustion Aerosol Standard (CAST) Generator burning 12 aviation fuels including conventional Jet-A, SAFs, and blends thereof. The fuels varied in aromatics (0-25.2%), sulphur (0-3000 ppm) and hydrogen (13.43-15.31%) contents. Toxicity of the collected primary PM was studied in vitro utilising Air-Liquid Interface (ALI) exposure of lung epithelial cells (Calu-3) in monoculture and co-culture with macrophages (differentiated THP-1 cells). Cells were exposed to PM extracted from filters and nebulised from suspensions using a cloud-based ALI exposure system. Toxicity readout parameters were analysed 24 h after exposure. Results showed presence of genotoxicity and changes in gene expression at dose levels which did not induce cytotoxicity. DNA damage was detected through Comet assay in cells exposed to CAST generated samples. Real-Time PCR performed to investigate the expression profile of genes involved in oxidative stress and DNA repair pathways showed different behaviours after exposure to the various PM samples. No differences were found in pro-inflammatory interleukin-8 secretion. This study indicates that primary PM toxicity is driven by wider factors than fuel composition, highlighting that further work is needed to substantiate the full toxicity of aircraft exhaust PM inclusive of secondary PM emanating from numerous engine technologies across the power range burning conventional Jet-A and SAF.

Redox-activity and in vitro effects of regional atmospheric aerosol pollution: Seasonal differences and correlation between oxidative potential and in vitro toxicity of PM1

Particulate Matter (PM) is a complex and heterogeneous mixture of atmospheric particles recognized as a threat to human health. Oxidative Potential (OP) measurement is a promising and integrative method for estimating PM-induced health impacts since it is recognized as more closely associated with adverse health effects than ordinarily used PM mass concentrations. OP measurements could be introduced in the air quality monitoring, along with the parameters currently evaluated. PM deposition in the lungs induces oxidative stress, inflammation, and DNA damage. The study aimed to compare the OP measurements with toxicological effects on BEAS-2B and THP-1 cells of winter and summer PM1 collected in the Po Valley (Italy) during 2021. PM1 was extracted in deionized water by mechanical agitation and tested for OP and, in parallel, used to treat cells. Cytotoxicity, genotoxicity, oxidative stress, and inflammatory responses were assessed by MTT test, DCFH-DA assay, micronucleus, γ-H2AX, comet assay modified with endonucleases, ELISA, and Real-Time PCR. The evaluation of OP was performed by applying three different assays: dithiothreitol (OPDTT), ascorbic acid (OPAA), and 2',7'-dichlorofluorescein (OPDCFH), in addition, the reducing potential was also analysed (RPDPPH). Seasonal differences were detected in all the parameters investigated. The amount of DNA damage detected with the Comet assay and ROS formation highlights the presence of oxidative damage both in winter and in summer samples, while DNA damage (micronucleus) and genes regulation were mainly detected in winter samples. A positive correlation with OPDCFH (Spearman's analysis, p < 0.05) was detected for IL-8 secretion and γ-H2AX. These results provide a biological support to the implementation in air quality monitoring of OP measurements as a useful proxy to estimate PM-induced cellular toxicological responses. In addition, these results provide new insights for the assessment of the ability of secondary aerosol in the background atmosphere to induce oxidative stress and health effects.

The impact of low emission zones on personal exposure to ultrafine particles in the commuter environment

Auckland is a city with limited industrial activity, road traffic being the dominant source of air pollution. Thus, the time periods when social contact and movement in Auckland were severely curtailed due to COVID-19 restrictions presented a unique opportunity to observe impacts on pedestrian exposure to air pollution under a range of different traffic flow scenarios, providing insights into the impacts of potential future traffic calming measures. Pedestrian exposure to ultrafine particles (UFPs), was measured using personal monitoring along a customised route through Central Auckland during different COVID-19-affected traffic flow conditions. Results showed that reduced traffic flows led to statistically significant reductions in average exposure to UFP under all traffic reduction scenarios (TRS). However, the size of the reduction was variable in both time and place. Under the most stringent TRS (traffic reduction of 82 %), median ultrafine particle (UFP) concentrations reduced by 73 %. Under the less stringent scenario, the extent of reduction varied in time and space; a traffic reduction of 62 % resulted in a 23 % reduction in median UFP concentrations in 2020 but in 2021 similar traffic reductions led to a decrease in median UFP concentrations of 71 %. Under all scenarios, the magnitude of the impact of traffic reductions on UFP exposure varied along the route, with areas dominated by emissions from construction and ferry/port activities showing little correlation between traffic flow and exposure. Shared traffic spaces, previously pedestrianised, also recorded consistently high concentrations with little variability observed. This study provided a unique opportunity to assess the potential benefits and risks of such zones and to help decision-makers evaluate future traffic management interventions (such as low emissions zones). The results suggest that controlled traffic flow interventions can result in a significant reduction in pedestrian exposure to UFPs, but that the magnitude of reductions is sensitive to local-scale variations in meteorology, urban land use and traffic flow patterns.

Toxicological Profile of PM from Different Sources in the Bronchial Epithelial Cell Line BEAS-2B

The toxicity of particulate matter (PM) is strictly associated with its physical-chemical characteristics, such as size or chemical composition. While these properties depend on the origin of the particles, the study of the toxicological profile of PM from single sources has rarely been highlighted. Hence, the focus of this research was to investigate the biological effects of PM from five relevant sources of atmospheric PM: diesel exhaust particles, coke dust, pellet ashes, incinerator ashes, and brake dust. Cytotoxicity, genotoxicity, oxidative, and inflammatory response were assessed in a bronchial cell line (BEAS-2B). BEAS-2B cells were exposed to different concentrations (25, 50, 100, and 150 μg/mL medium) of particles suspended in water. The exposure lasted 24 h for all the assays performed, except for reactive oxygen species, which were evaluated after 30 min, 1 h, and 4 h of treatment. The results showed a different action of the five types of PM. All the tested samples showed a genotoxic action on BEAS-2B, even in the absence of oxidative stress induction. Pellet ashes seemed to be the only ones able to induce oxidative stress by boosting the formation of reactive oxygen species, while brake dust resulted in the most cytotoxic. In conclusion, the study elucidated the differential response of bronchial cells to PM samples generated by different sources. The comparison could be a starting point for a regulatory intervention since it highlighted the toxic potential of each type of PM tested.

Ambient ultrafine particle (PM0.1): Sources, characteristics, measurements and exposure implications on human health

The problem of ultrafine particles (UFPs; PM_0.1) has been prevalent since the past decades. In addition to become easily inhaled by human respiratory system due to their ultrafine diameter (<100 nm), ambient UFPs possess various physicochemical properties which make it more toxic. These properties vary based on the emission source profile. The current development of UFPs studies is hindered by the problem of expensive instruments and the inexistence of standardized measurement method. This review provides detailed insights on ambient UFPs sources, physicochemical properties, measurements, and estimation models development. Implications on health impacts due to short-term and long-term exposure of ambient UFPs are also presented alongside the development progress of potentially low-cost UFPs sensors which can be used for future UFPs studies references. Current challenge and future outlook of ambient UFPs research are also discussed in this review. Based on the review results, ambient UFPs may originate from primary and secondary sources which include anthropogenic and natural activities. In addition to that, it is confirmed from various chemical content analysis that UFPs carry heavy metals, PAHs, BCs which are toxic in its nature. Measurement of ambient UFPs may be performed through stationary and mobile methods for environmental profiling and exposure assessment purposes. UFPs PNC estimation model (LUR) developed from measurement data could be deployed to support future epidemiological study of ambient UFPs. Low-cost sensors such as bipolar ion and ionization sensor from common smoke detector device may be further developed as affordable instrument to monitor ambient UFPs. Recent studies indicate that short-term exposure of UFPs can be associated with HRV change and increased cardiopulmonary effects. On the other hand, long-term UFPs exposure have positive association with COPD, CVD, CHF, pre-term birth, asthma, and also acute myocardial infarction cases.

Hourly Ultrafine Particle Exposure and Acute Myocardial Infarction Onset: An Individual-Level Case-Crossover Study in Shanghai, China, 2015-2020

Associations between ultrafine particles (UFPs) and hourly onset of acute myocardial infarction (AMI) have rarely been investigated. We aimed to evaluate the impacts of UFPs on AMI onset and the lag patterns. A time-stratified case-crossover study was performed among 20,867 AMI patients from 46 hospitals in Shanghai, China, between January 2015 and December 2020. Hourly data of AMI onset and number concentrations of nanoparticles of multiple size ranges below 0.10 μm (0.01-0.10, UFP/PNC_0.01-0.10; 0.01-0.03, PNC_0.01-0.03; 0.03-0.05, PNC_0.03-0.05; and 0.05-0.10 μm, PNC_0.05-0.10) were collected. Conditional logistic regressions were applied. Transient exposures to these nanoparticles were significantly associated with AMI onset, with almost linear exposure-response curves. These associations occurred immediately after exposure, lasted for approximately 6 h, and attenuated to be null thereafter. Each interquartile range increase in concentrations of total UFPs, PNC_0.01-0.03, PNC_0.03-0.05, and PNC_0.05-0.10 during the preceding 0-6 h was associated with increments of 3.29, 2.08, 2.47, and 2.93% in AMI onset risk, respectively. The associations were stronger during warm season and at high temperatures and were robust after adjusting for criteria air pollutants. Our findings provide novel evidence that hourly UFP exposure is associated with immediate increase in AMI onset risk.

Physicochemical and toxicological properties of wood smoke particulate matter as a function of wood species and combustion condition

Wood burning is a major source of ambient particulate matter (PM) and has been epidemiologically linked to adverse pulmonary health effects, however the impact of fuel and burning conditions on PM properties has not been investigated systematically. Here, we employed our recently developed integrated methodology to characterize the physicochemical and biological properties of emitted PM as a function of three common hardwoods (oak, cherry, mesquite) and three representative combustion conditions (flaming, smoldering, incomplete). Differences in PM and off-gas emissions (aerosol number/mass concentrations; carbon monoxide; volatile organic compounds) as well as inorganic elemental composition and organic carbon functional content of PM0.1 were noted between wood types and combustion conditions, although the combustion scenario exerted a stronger influence on the emission profile. More importantly, flaming combustion PM0.1 from all hardwoods significantly stimulated the promoter activity of Sterile Alpha Motif (SAM) pointed domain containing ETS (E-twenty-six) Transcription Factor (SPDEF) in human embryonic kidney 293 (HEK-293 T) cells, a biomarker for mucin gene expression associated with mucus production in pulmonary diseases. However, no bioactivity was observed for smoldering and incomplete combustion, which was likely driven by differences in the organic composition of PM0.1. Detailed chemical speciation of organic components of wood smoke is warranted to identify the individual compounds that drive specific biological responses.

Development of an Integrated Platform to Assess the Physicochemical and Toxicological Properties of Wood Combustion Particulate Matter

Wood burning contributes to indoor and ambient particulate matter (PM) pollution and has been associated with increased morbidity and mortality. Here, we present an integrated methodology that allows to generate, sample, and characterize wood smoke derived from different moisture contents and representative combustion conditions using pine wood as a model. Flaming, smoldering, and incomplete combustion were assessed for low-moisture pine, whereas both low-moisture pine and high-moisture pine were investigated under flaming conditions. Real-time monitoring of carbon monoxide, volatile organic compounds, and aerosol number concentration/size in wood smoke was performed. The PM was size-fractionated, sampled, and characterized for elemental/organic carbon, organic functional groups, and inorganic elements. Bioactivity of PM was assessed by measuring the sterile alpha motif (SAM) pointed domain containing ETS (E-twenty-six) transcription factor (SPDEF) gene promoter activity in human embryonic kidney 293 (HEK-293T) cells, a biomarker for mucin gene expression. Findings showed that moisture content and combustion condition significantly affected the organic and inorganic elemental composition of PM0.1 as well as its bioactivity. Also, for a given moisture and combustion scenario, PM chemistry and bioactivity differed considerably with PM size. Importantly, PM0.1 from flaming combustion of low-moisture pine contained the highest abundance of the oxygenated saturated aliphatic functional group [H-C-O] and was also biologically most potent in stimulating SPDEF promoter activity, suggesting the role of organic compounds such as carbohydrates and sugar alcohols (that contain [H-C-O]) in driving mucus-related respiratory outcomes. Our platform enables further well-controlled parametric studies using a combination of in vitro and in vivo approaches to link wood burning parameters with acute and chronic inhalation health effects of wood smoke.

On the Redox-Activity and Health-Effects of Atmospheric Primary and Secondary Aerosol: Phenomenology

The RHAPS (Redox-Activity And Health-Effects Of Atmospheric Primary And Secondary Aerosol) project was launched in 2019 with the major objective of identifying specific properties of the fine atmospheric aerosol from combustion sources that are responsible for toxicological effects and can be used as new metrics for health-related outdoor pollution studies. In this paper, we present the overall methodology of RHAPS and introduce the phenomenology and the first data observed. A comprehensive physico-chemical aerosol characterization has been achieved by means of high-time resolution measurements (e.g., number size distributions, refractory chemical components, elemental composition) and low-time resolution analyses (e.g., oxidative potential, toxicological assays, chemical composition). Preliminary results indicate that, at the real atmospheric conditions observed (i.e., daily PM1 from less than 4 to more than 50 μg m−3), high/low mass concentrations of PM1, as well as black carbon (BC) and water soluble Oxidative Potential (WSOP,) do not necessarily translate into high/low toxicity. Notably, these findings were observed during a variety of atmospheric conditions and aerosol properties and with different toxicological assessments. Findings suggest a higher complexity in the relations observed between atmospheric aerosol and toxicological endpoints that go beyond the currently used PM1 metrics. Finally, we provide an outlook to companion papers where data will be analyzed in more detail, with the focus on source apportionment of PM1 and the role of source emissions on aerosol toxicity, the OP as a predictive variable for PM1 toxicity, and the related role of SOA possessing redox-active capacity, exposure-response relationships for PM1, and air quality models to forecast PM1 toxicity.

Characterizing the Chemical Profile of Incidental Ultrafine Particles for Toxicity Assessment Using an Aerosol Concentrator

Incidental ultrafine particles (UFPs) constitute a key pollutant in industrial workplaces. However, characterizing their chemical properties for exposure and toxicity assessments still remains a challenge. In this work, the performance of an aerosol concentrator (Versatile Aerosol Concentration Enrichment System, VACES) was assessed to simultaneously sample UFPs on filter substrates (for chemical analysis) and as liquid suspensions (for toxicity assessment), in a high UFP concentration scenario. An industrial case study was selected where metal-containing UFPs were emitted during thermal spraying of ceramic coatings. Results evidenced the comparability of the VACES system with online monitors in terms of UFP particle mass (for concentrations up to 95 µg UFP/m3) and between filters and liquid suspensions, in terms of particle composition (for concentrations up to 1000 µg/m3). This supports the applicability of this tool for UFP collection in view of chemical and toxicological characterization for incidental UFPs. In the industrial setting evaluated, results showed that the spraying temperature was a driver of fractionation of metals between UF (<0.2 µm) and fine (0.2-2.5 µm) particles. Potentially health hazardous metals (Ni, Cr) were enriched in UFPs and depleted in the fine particle fraction. Metals vaporized at high temperatures and concentrated in the UF fraction through nucleation processes. Results evidenced the need to understand incidental particle formation mechanisms due to their direct implications on particle composition and, thus, exposure. It is advisable that personal exposure and subsequent risk assessments in occupational settings should include dedicated metrics to monitor UFPs (especially, incidental).

Indoor and Outdoor Nanoparticle Concentrations in an Urban Background Area in Northern Sweden: The NanoOffice Study

In recent years, nanoparticles (NPs) have received much attention due to their very small size, high penetration capacity, and high toxicity. In urban environments, combustion-formed nanoparticles (CFNPs) dominate in particle number concentrations (PNCs), and exposure to those particles constitutes a risk to human health. Even though fine particles (<2.5 µm) are regularly monitored, information on NP concentrations, both indoors and outdoors, is still limited. In the NanoOffice study, concentrations of nanoparticles (10–300 nm) were measured both indoors and outdoors with a 5-min time resolution at twelve office buildings in Umeå. Measurements were taken during a one-week period in the heating season and a one-week period in the non-heating season. The measuring equipment SMPS 3938 was used for indoor measurements, and DISCmini was used for outdoor measurements. The NP concentrations were highest in offices close to a bus terminal and lowest in offices near a park. In addition, a temporal effect appeared, usually with higher concentrations of nanoparticles found during daytime in the urban background area, whereas considerably lower nanoparticle concentrations were often present during nighttime. Infiltration of nanoparticles from the outdoor air into the indoor air was also common. However, the indoor/outdoor ratios (I/O ratios) of NPs showed large variations between buildings, seasons, and time periods, with I/O ratios in the range of 0.06 to 0.59. The reasons for high indoor infiltration rates could be NP emissions from adjacent outdoor sources. We could also see particle growth since the indoor NPs were, on average, almost twice as large as the NPs measured outdoors. Despite relatively low concentrations of NPs in the urban background air during nighttime, they could rise to very high daytime concentrations due to local sources, and those particles also infiltrated the indoor air.

An overview of methods of fine and ultrafine particle collection for physicochemical characterisation and toxicity assessments

Particulate matter (PM) is a crucial health risk factor for respiratory and cardiovascular diseases. The smaller size fractions, ≤2.5 μm (PM_2.5; fine particles) and ≤0.1 μm (PM_0.1; ultrafine particles), show the highest bioactivity but acquiring sufficient mass for in vitro and in vivo toxicological studies is challenging. We review the suitability of available instrumentation to collect the PM mass required for these assessments. Five different microenvironments representing the diverse exposure conditions in urban environments are considered in order to establish the typical PM concentrations present. The highest concentrations of PM_2.5 and PM_0.1 were found near traffic (i.e. roadsides and traffic intersections), followed by indoor environments, parks and behind roadside vegetation. We identify key factors to consider when selecting sampling instrumentation. These include PM concentration on-site (low concentrations increase sampling time), nature of sampling sites (e.g. indoors; noise and space will be an issue), equipment handling and power supply. Physicochemical characterisation requires micro- to milli-gram quantities of PM and it may increase according to the processing methods (e.g. digestion or sonication). Toxicological assessments of PM involve numerous mechanisms (e.g. inflammatory processes and oxidative stress) requiring significant amounts of PM to obtain accurate results. Optimising air sampling techniques are therefore important for the appropriate collection medium/filter which have innate physical properties and the potential to interact with samples. An evaluation of methods and instrumentation used for airborne virus collection concludes that samplers operating cyclone sampling techniques (using centrifugal forces) are effective in collecting airborne viruses. We highlight that predictive modelling can help to identify pollution hotspots in an urban environment for the efficient collection of PM mass. This review provides guidance to prepare and plan efficient sampling campaigns to collect sufficient PM mass for various purposes in a reasonable timeframe.

Where Do Ultrafine Particles and Nano-Sized Particles Come From?

This paper presents an overview of the literature studies on the sources of ultrafine particles (UFPs), nanomaterials (NMs), and nanoparticles (NPs) occurring in indoor (occupational and residential) and outdoor environments. Information on the relevant emission factors, particle concentrations, size, and compositions is provided, and health relevance of UFPs and NPs is discussed. Particular attention is focused on the fraction of particles that upon inhalation deposit on the olfactory bulb, because these particles can possibly translocate to brain and their possible role in neurodegenerative diseases is an important issue emerging in the recent literature.

Analysis of Particulate Matter Concentration Variability and Origin in Selected Urban Areas in Poland

The work presents the results of research and analyses related to measurements of concentration and chemical composition of three size fractions of particulate matter (PM), PM10, PM2.5 and PM1.0. The studies were conducted in the years 2014–2016 during both the heating and non-heating season in two Polish cities: Wrocław and Poznań. The studies indicate that in Wrocław and Poznań, the highest annual concentrations of particulate matter (PM1.0, PM2.5, and PM10) were observed in 2016, and the mean concentrations were respectively equal to 18.16 μg/m3, 30.88 μg/m3 and 41.08 μg/m3 (Wrocław) and 8.5 μg/m3, 30.8 μg/m3 and 32.9 μg/m3 (Poznań). Conducted analyses of the chemical composition of the particulate matter also indicated higher concentrations of organic and elemental carbon (OC and EC), and water-soluble ions in a measurement series which took place in the heating season were studied. Analyses with the use of principal component analysis (PCA) indicated a dominating percentage of fuel combustion processes as sources of particulate matter emission in the areas considered in this research. Acquired results from these analyses may indicate the influence of secondary aerosols on air quality. In the summer season, a significant role could be also played by an influx of pollutants—mineral dust—originating from outside the analyzed areas or from the resuspension of mineral and soil dust.

Ultrafine Particles from Residential Biomass Combustion: A Review on Experimental Data and Toxicological Response

Biomass burning is considered an important source of indoor and outdoor air pollutants worldwide. Due to competitive costs and climate change sustainability compared to fossil fuels, biomass combustion for residential heating is increasing and expected to become the major source of primary particulate matter emission over the next 5-15 years. The understanding of health effects and measures necessary to reduce biomass emissions of harmful compounds is mandatory to protect public health. The intent of this review is to report available data on ultrafine particles (UFPs, i.e., particles with diameter smaller than 100 nm) emitted by residential biomass combustion and their effects on human health (in vitro and in vivo studies). Indeed, as far as we know, papers focusing specifically on UFPs originating from residential biomass combustion and their impact on human health are still lacking.

In Vivo Comparative Study on Acute and Sub-acute Biological Effects Induced by Ultrafine Particles of Different Anthropogenic Sources in BALB/c Mice

Exposure to ultrafine particles (UFPs) leads to adverse effects on health caused by an unbalanced ratio between UFPs deposition and clearance efficacy. Since air pollution toxicity is first direct to cardiorespiratory system, we compared the acute and sub-acute effects of diesel exhaust particles (DEP) and biomass burning-derived particles (BB) on bronchoalveolar Lavage Fluid (BALf), lung and heart parenchyma. Markers of cytotoxicity, oxidative stress and inflammation were analysed in male BALB/c mice submitted to single and repeated intra-tracheal instillations of 50 μg UFPs. This in-vivo study showed the activation of inflammatory response (COX-2 and MPO) after exposure to UFPs, both in respiratory and cardiovascular systems. Exposure to DEP results also in pro- and anti-oxidant (HO-1, iNOS, Cyp1b1, Hsp70) protein levels increase, although, stress persist only in cardiac tissue under repeated instillations. Statistical correlations suggest that stress marker variation was probably due to soluble components and/or mediators translocation of from first deposition site. This mechanism, appears more important after repeated instillations, since inflammation and oxidative stress endure only in heart. In summary, chemical composition of UFPs influenced the activation of different responses mediated by their components or pro-inflammatory and pro-oxidative molecules, indicating DEP as the most damaging pollutant in the comparison.

Contribution of Fine Particles to Air Emission at Different Phases of Biomass Burning

Particle size distribution in biomass smoke was observed for different burning phases, including flaming and smouldering, during the combustion of nine common Australian vegetation representatives. Smoke particles generated during the smouldering phase of combustions were found to be coarser as compared to flaming aerosols for all hard species. In contrast, for leafy species, this trend was inversed. In addition, the combustion process was investigated over the entire duration of burning by acquiring data with one second time resolution for all nine species. Particles were separately characterised in two categories: fine particles with dominating diffusion properties measurable with diffusion-based instruments (Dp < 200 nm), and coarse particles with dominating inertia (Dp > 200 nm). It was found that fine particles contribute to more than 90 percent of the total fresh smoke particles for all investigated species.

Long-term trends in submicron particle concentrations in a metropolitan area of the northeastern United States

Significant changes in emission sources have occurred in the northeastern United States over the past decade, due in part to the implementation of emissions standards, the introduction and addition of abatement technologies for road transport, changes in fuel sulfur content for road and non-road transport, as well as economic impacts of a major recession and differential fuel prices. These changes in emission scenarios likely affected the concentrations of airborne submicron particles. This study investigated the characteristics of 11-500nm particle number concentrations and their size spectra in Rochester, NY during the past 15years (2002 to 2016). The modal structure, diurnal, weekly and monthly patterns of particle number concentrations are analyzed. Long-term trends are quantified using seasonal-trend decomposition procedures based on "Loess", Mann-Kendall regression with Theil-Sen slope and piecewise regression. Particle concentrations underwent significant (p<0.05) downward trends. An annual decrease of -323particles/cm³/y (-4.6%/y) was estimated for the total particle number concentration using Theil-Sen analysis. The trends were driven mainly by the decrease in particles in the 11-50nm range (-181particles/cm³/y; -4.7%/y). Slope changes were investigated annually and seasonally. Piecewise regression found different slopes for different portions of the overall period with the strongest declines between 2005 and 2011/2013, followed by small upward trends between 2013 and 2016 for most size bins, possibly representing increased vehicular traffic after the recovery from the 2008 recession.

Higher health effects of ambient particles during the warm season: The role of infiltration factors

A large number of studies have shown much higher health effects of particulate matter (PM) during the warm compared to the cold season. In this paper we present the results of an experimental study carried out in an unoccupied test apartment with the aim of understanding the reasons behind the seasonal variations of the health effects due to ambient PM_2.5 exposure. Measurements included indoor and outdoor PM_2.5 mass and chemical composition as well as particle size distribution of ultrafine particles. Monitoring campaigns were carried out during summer and winter following a ventilation protocol developed to replicate typical occupant behaviour according to a questionnaire-based survey. Our findings showed that seasonal variation of the relationship between ambient and indoor mass concentrations cannot entirely explain the apparent difference in PM toxicity between seasons and size distribution and chemical composition of particles were identified as other possible causes of changes in the apparent PM toxicity. A marked decrease of ultrafine particles (<100 nm) passing from outdoors to indoors was observed during winter; this resulted in higher indoor exposure to nanoparticles (<50 nm) during summer. With regards to the chemical composition, a pooled analysis showed infiltration factors of chemical species similar to that obtained for PM_2.5 mass with values increasing from 0.73 during winter to 0.90 during summer and few deviations from the pooled estimates. In particular, significantly lower infiltration factors and sink effect were found for nitrates and ammonium during winter. In addition, a marked increase in the contribution of indoor and outdoor sulfates to the total mass was observed during summer.

Assessment of light extinction at a European polluted urban area during wintertime: Impact of PM1 composition and sources

In this paper, results from receptor modelling performed on a well-characterised PM₁ dataset were combined to chemical light extinction data (b_ext) with the aim of assessing the impact of different PM₁ components and sources on light extinction and visibility at a European polluted urban area. It is noteworthy that, at the state of the art, there are still very few papers estimating the impact of different emission sources on light extinction as we present here, although being among the major environmental challenges at many polluted areas. Following the concept of the well-known IMPROVE algorithm, here a tailored site-specific approach (recently developed by our group) was applied to assess chemical light extinction due to PM₁ components and major sources. PM₁ samples collected separately during daytime and nighttime at the urban area of Milan (Italy) were chemically characterised for elements, major ions, elemental and organic carbon, and levoglucosan. Chemical light extinction was estimated and results showed that at the investigated urban site it is heavily impacted by ammonium nitrate and organic matter. Receptor modelling (i.e. Positive Matrix Factorization, EPA-PMF 5.0) was effective to obtain source apportionment; the most reliable solution was found with 7 factors which were tentatively assigned to nitrates, sulphates, wood burning, traffic, industry, fine dust, and a Pb-rich source. The apportionment of aerosol light extinction (b_ext,aer) according to resolved sources showed that considering all samples together nitrate contributed at most (on average 41.6%), followed by sulphate, traffic, and wood burning accounting for 18.3%, 17.8% and 12.4%, respectively.

Size-segregated aerosol in a hot-spot pollution urban area: Chemical composition and three-way source apportionment

In this work, a comprehensive characterisation and source apportionment of size-segregated aerosol collected using a multistage cascade impactor was performed. The samples were collected during wintertime in Milan (Italy), which is located in the Po Valley, one of the main pollution hot-spot areas in Europe. For every sampling, size-segregated mass concentration, elemental and ionic composition, and levoglucosan concentration were determined. Size-segregated data were inverted using the program MICRON to identify and quantify modal contributions of all the measured components. The detailed chemical characterisation allowed the application of a three-way (3-D) receptor model (implemented using Multilinear Engine) for size-segregated source apportionment and chemical profiles identification. It is noteworthy that - as far as we know - this is the first time that three-way source apportionment is attempted using data of aerosol collected by traditional cascade impactors. Seven factors were identified: wood burning, industry, resuspended dust, regional aerosol, construction works, traffic 1, and traffic 2. Further insights into size-segregated factor profiles suggested that the traffic 1 factor can be associated to diesel vehicles and traffic 2 to gasoline vehicles. The regional aerosol factor resulted to be the main contributor (nearly 50%) to the droplet mode (accumulation sub-mode with modal diameter in the range 0.5-1 μm), whereas the overall contribution from the two factors related to traffic was the most important one in the other size modes (34-41%). The results showed that applying a 3-D receptor model to size-segregated samples allows identifying factors of local and regional origin while receptor modelling on integrated PM fractions usually singles out factors characterised by primary (e.g. industry, traffic, soil dust) and secondary (e.g. ammonium sulphate and nitrate) origin. Furthermore, the results suggested that the information on size-segregated chemical composition in different size classes was exploited by the model to relate primary emissions to rapidly-formed secondary compounds.