Bioaccessibility of PBDEs present in indoor dust: A novel dialysis membrane method with a Tenax TA® absorption sink

Bioaccessibility of halogenated flame retardants and organophosphate esters in settled dust: Influences of specific dust matrices from informal e-waste and end-of-life vehicle processing areas in Vietnam

Bioaccessibility of halogenated flame retardants (HFRs) and organophosphorus esters (OPEs) is necessarily investigated to provide more accurate risk assessment and information about absorption behavior of these pollutants. In this study, total and bioaccessible concentrations of HFRs (including legacy and alternative substances) and OPEs were determined in settled dust samples collected from Vietnamese e-waste and end-of-life vehicle (ELV) processing areas. Concentrations of both HFRs and OPEs were significantly higher in the e-waste dust than ELV dust. Bioavailability of HFRs and OPEs in dust was determined by using an in vitro assay with human-simulated digestive fluids, dialysis membrane, and Tenax® TA sorptive sink. Bioaccessibility of HFRs was markedly lower than that of OPEs, which could be largely due to higher hydrophobicity of HFRs compared to OPEs. Bioaccessibility of almost hydrophobic compounds were markedly lower in the e-waste dust (containing micronized plastic debris) than in the ELV dust (containing oily materials), suggesting the influence of specific dust matrices on pollutant bioaccessibility. Although the daily uptake doses of selected HFRs and OPEs from dust were markedly higher in the e-waste sites compared to the ELV sites, the direct exposure risk was not significant. Our results suggest that bioaccessibility can partly explain the differences between dust and uptake profiles, which may relate to accumulation profiles of HFRs and OPEs in human samples.

Endocrine disrupting potential of total and bioaccessible extracts of dust from seven different types of indoor environment

Information on the indoor environment as a source of exposure with potential adverse health effects is mostly limited to a few pollutant groups and indoor types. This study provides a comprehensive toxicological profile of chemical mixtures associated with dust from various types of indoor environments, namely cars, houses, prefabricated apartments, kindergartens, offices, public spaces, and schools. Organic extracts of two different polarities and bioaccessible extracts mimicking the gastrointestinal conditions were prepared from two different particle size fractions of dust. These extracts were tested on a battery of human cell-based bioassays to assess endocrine disrupting potentials. Furthermore, 155 chemicals from different pollutant groups were measured and their relevance for the bioactivity was determined using concentration addition modelling. The exhaustive and bioaccessible extracts of dust from the different microenvironments interfered with aryl hydrocarbon receptor, estrogen, androgen, glucocorticoid, and thyroid hormone (TH) receptor signalling, and with TH transport. Noteably, bioaccessible extracts from offices and public spaces showed higher estrogenic effects than the organic solvent extracts. 114 of the 155 targeted chemicals were detectable, but the observed bioactivity could be only marginally explained by the detected chemicals. Diverse toxicity patterns across different microenvironments that people inhabit throughout their lifetime indicate potential health and developmental risks, especially for children. Limited data on the endocrine disrupting potency of relevant chemical classes, especially those deployed as replacements for legacy contaminants, requires further study.

In vivo-in vitro correlations (IVIVC) for the assessment of pyrethroid bioavailability in honey

Bioaccessibility/bioavailability is an important factor in assessing the potential human health risk via oral exposure. However, methods for accurately predicting the bioaccessibility/bioavailability of pesticide residues are still limited, preventing accurate measurements of actual exposure to pesticide residues. In this study, pyrethroid bioavailability in honey were analysed using a mouse bioassay and bioaccessibility via in vitro methods with Tenax extraction. The results demonstrated that the combined liver plus kidney data served as an appropriate biomarker to estimate the relative bioavailability. Notably, significant in vivo-in vitro correlations (IVIVC) were observed between bioavailability and bioaccessibility (R2 = 0.7898-0.9793). Estimation of the bioavailability of honey from different nectar plants using derived IVIVC confirmed that different contents and physicochemical properties might affect its bioavailability. The findings provide insight into assessing human exposure to pesticides based on bioavailability and can decrease the uncertainty about the assessment of the risk of dietary exposure to pesticides.

Evaluation of the oral bioaccessibility of legacy and emerging brominated flame retardants in indoor dust

Indoor dust is the main source of human exposure to brominated flame retardants (BFRs). In this study, in vitro colon-extended physiologically-based extraction test (CE-PBET) with Tenax as a sorptive sink was applied to evaluate the oral bioaccessibility of twenty-two polybrominated diphenyl ethers (PBDEs) and seven novel BFRs (NBFRs) via indoor dust ingestion. The mean bioaccessibilities of two NBFRs pentabromotoluene (PBT) and 1,2-Bis(2,4,6-tribromophenoxy) ethane (BTBPE) were first proposed, reaching 36.0% and 26.7%, respectively. In order to maintain homeostasis of the gastrointestinal tract, 0.4 g Tenax was added in CE-PEBT, which increased BFRs bioaccessibility by up to a factor of 1.4-1.9. The highest bioaccessibility of legacy PBDEs was tri-BDEs (73.3%), while 2-ethylhexyl-tetrabromo-benzoate (EHTBB), one of penta-BDE alternatives, showed the highest (62.2%) among NBFRs. The influence of food nutrients, liquid to solid (L/S) ratio, and octanol-water partition coefficient (Kow) on bioaccessibility was assessed. The oral bioaccessibility of BFRs increased with existence of protein or carbohydrate while lipid did the opposite. The bioaccessibilities of PBDEs and NBFRs were relatively higher with 200:1 L/S ratio. PBDEs bioaccessibility generally decreased with increasing LogKow. No significant correlation was observed between NBFRs bioaccessibility and LogKow. This study comprehensively evaluated the bioaccessibilities of legacy and emerging BFRs via dust ingestion using Tenax-assisted CE-PBET, and highlighted the significance to fully consider potential influencing factors on BFRs bioaccessibility in further human exposure estimation.

Novel Insights into the Dermal Bioaccessibility and Human Exposure to Brominated Flame Retardant Additives in Microplastics

In this study, we optimized and applied an in vitro physiologically based extraction test to investigate the dermal bioaccessibility of polybrominated diphenyl ethers (PBDEs) and hexabromocyclododecane (HBCDD), incorporated as additives in different types of microplastics (MPs), and assess human dermal exposure to these chemicals. The dermal bioaccessibility of PBDEs in polyethylene (PE) MPs was significantly higher (P < 0.05) than in polypropylene (PP) MPs. Both log K_ow and water solubility influenced the dermal bioaccessibility of PBDEs. For HBCDDs in polystyrene MPs, the dermally bioaccessible fractions were 1.8, 2.0, and 1.6% of the applied dose for α-, β-, and γ-HBCDDs, respectively. MP particle size and the presence of cosmetic formulations (antiperspirant, foundation, moisturizer and sunscreen) influenced the bioaccessibility of PBDEs and HBCDDs in MP matrices at varying degrees of significance. Human exposure to ∑PBDEs and ∑HBCDDs via dermal contact with MPs ranged from 0.02 to 22.2 and 0.01 to 231 ng (kg bw)^-1 d^-1 and from 0.02 to 6.27 and 0.2 to 65 ng (kg bw)^-1 d^-1 for adults and toddlers, respectively. Dermal exposure to PBDEs and HBCDDs in MPs is substantial, highlighting for the first time the significance of the dermal pathway as a major route of human exposure to additive chemicals in microplastics.

Bioaccessibility and bioavailability of NPAHs in soils using in vitro-in vivo assays: Comparison of laboratory and outdoor environmental aging effect

Aging process is one of the most important factors that markedly reduces bioaccessibility and bioavailability (bioac-bioav) of organic contaminants. However, only few data on comparison of the effects of laboratory artificial aging (LAA) and outdoor environmental aging (OEA) processes on nitrated polycyclic aromatic hydrocarbons (NPAHs) bioac-bioav are available. In the current study, oral bioac-bioav of NPAHs in LAA and OEA soils (aging time intervals: 0, 45, 90, 120 and 150 d) were measured by in vitro traditional Fed ORganic Estimation human Simulation Test (FOREhST) and Tenax improved FOREhST (TI-FOREhST) methods, and in vivo mouse model. Tenax significantly increased the bioaccessibility of NPAHs in freshly spiked and aging soils from 0.3-40.9 % to 15.6-95.3 %, and 0.3-40.9 % to 1.0-84.5 %, respectively. Aging significantly reduced the NPAHs bioaccessibility (from 36.5 % to 10.7 %, and 12.1 % to 5.1 % as measured by FOREhST and TI-FOREhST, respectively) and bioavailability (from 27.7 % to 9.9 %, as measured by mouse model). The changes in bioac-bioav were mainly observed within the first 120 d of aging. The statistical analyses of NPAHs bioac-bioav showed no significant difference (p > 0.05) among the aging time intervals in LAA and OEA soils, which demonstrated that the LAA can relatively represent the OEA. Determination of TOC content in LAA and OEA soil can intuitively reflect whether the difference of NPAHs bioac-bioav between two aging treatment groups is significant. The mean bioaccessibility of NPAHs in soil measured by TI-FOREhST (mean 20.6 %) is closer to the bioavailability measured by mouse model (mean 19.4 %), indicating that Tenax improved in vitro method is more reliable than traditional methods, to predict the bioavailability of NPAHs.

Accessibility investigation of semi-volatile organic compounds in indoor dust estimated by multi-ratio equilibrium passive sampling

Many semi-volatile organic compounds (SVOCs) accumulate in indoor dust, which serves as a repository for those compounds. The presence of SVOCs in indoor environments is of concern because many of them are suspected to have toxic effects. Total SVOC concentrations in the dust are generally used for exposure assessment to indoor contaminants, assuming that 100% of the SVOCs is accessible for human uptake. However, such an assumption may potentially lead to an overestimated risk related to dust exposure. We applied a multi-ratio equilibrium passive sampling (MR-EPS) for estimation of SVOC accessibility in indoor settled dust using silicone passive samplers and three particle size dust fractions, <0.25 mm, 0.25-0.5 mm, and 1-2 mm in dry and wet conditions. Equilibrations were performed at various sampler-dust mass ratios to achieve different degrees of SVOC depletion, allowing the construction of a desorption isotherm. The desorption isotherms provided accessible fractions (F_AS), equivalent air concentrations (C_AIR), dust-air partition coefficients (K_DUST-AIR) and organic carbon-air partition coefficients (K_OC-AIR). The highest F_AS were observed in the <0.25 mm dust fraction in wet conditions which is relevant for exposure assessment via oral ingestion. The highest C_AIR were estimated for several organophosphorus flame retardants (OPFRs), polycyclic aromatic hydrocarbons (PAHs) and synthetic musks. The logK_OC-AIR did not differ between dust particle sizes in dry and wet conditions but within compound groups, different relationships with hydrophobicity were observed. Equivalent lipid-based concentrations (C_L⇌DUST) calculated using available lipid-silicone partition coefficients (K_LIP-SIL) were compared with lipid-based concentrations (C_L) measured in human-related samples collected from Europeans. For hexachlorobenzene (HCB), C_L⇌DUST, and C_L were similar, indicating equilibrium attainment between environment and human samples. Lipid-based concentrations for persistent legacy contaminants were also similar but lower for PBDEs in human samples. Overall, accessibility estimation using MR-EPS in dust further contributes to human risk assessment.

Evaluating the inhalation bioaccessibility of traffic-impacted particulate matter-bound PAHs in a road tunnel by simulated lung fluids

Polycyclic aromatic hydrocarbons (PAHs) are the most highly concerned pollutants bound on traffic-impacted particulate matter (TIPM). The inhaled TIPM-bound PAHs risk has attracted much attention, whereas the inhalation bioaccessibility, a method to refine the exposure risk assessment, has not yet been extensively introduced in the exposure risk assessment. Thus, in vitro assays using artificial lung fluids including artificial lysosomal fluid (ALF), Gamble's solution (GS), and modified GS (MGS) were conducted to assess the inhalation bioaccessibility of USEPA 16 PAHs in TIPM collected from an expressway tunnel, the influence factors of PAHs' inhalation bioaccessibility were explored, and the exposure risk of TIPM-bound PAHs was estimated based on inhalation bioaccessibility. Results showed that the average PAHs concentrations were 30.5 ± 12.9 ng/m³, 36.2 ± 5.19 ng/m³, and 39.9 ± 4.31 ng/m³ in the tunnel inlet PM_2.5, TSP, and tunnel center PM_2.5, respectively. Phe, Flt, Pyr, Nap, Chr, BbF, and BkF were found as the dominant species in TSP and PM_2.5, indicating a dominant contribution of PAHs from diesel-fueled vehicular emissions. The bioaccessible fractions measured for different PAH species in tunnel PM_2.5 and TSP were highly variable, which can be attributed to PAHs' physicochemical properties, size, and carbonaceous materials of TIPM. The addition of Tenax into SLF as an "adsorption sink" can greatly increase PAHs' inhalation bioaccessibility, but DPPC has a limited effect on tunnel PM-bound PAHs' bioaccessibility. The incremental lifetime carcinogenic risk (ILCR) of tunnel inlet PM_2.5-bound PAHs evaluated according to their total mass concentration exceeded the threshold (1.0 × 10^-6) set by the USEPA, whereas the ILCRs estimated based on the inhalation bioaccessibility were far below the threshold. Hence, it is vitally important to take into consideration of pollutant's bioaccessibility to refine health risk assessment.

Determining the reusability of Tenax beads (60-80 mesh) in estimates of bioaccessibility using single-point extractions

Single-point Tenax extractions are a viable means of estimating bioaccessibility of hydrophobic organic contaminants in sediment, soil, and intestinal fluids. One advantage of this extraction technique is that after thorough cleaning and drying, Tenax beads can be reused in subsequent extractions with the assumption that no changes in bioaccessibility estimates will occur. This assumption of reusability, however, has not been tested. Therefore, the objective of the current study was to evaluate the reusability of Tenax beads by comparing bioaccessible polychlorinated biphenyl (PCB) concentrations measured by differently aged Tenax beads. New Tenax beads (60-80 mesh) were aged through 24 h single-point Tenax extractions of clean sand 0, 1, 5, 10, 15, 20, and 25 times. The aged Tenax was then used to extract 27 PCB congeners from laboratory spiked sediment and the bioaccessible PCB concentrations were compared. Despite significant effects of PCB congener (F_{26, 567} = 97.291, p = 2.00 × 10^-16), Tenax age (F_{6, 567} = 14.735, p = 1.12 × 10^-15), and the interaction of these two terms (F_{156, 567} = 1.711, p = 4.79 × 10^-6) on bioaccessible concentrations measured by Tenax, the significance was due to two PCB congeners that showed large variation during analytical quantification. For the remaining 25 congeners, no differences in bioaccessible PCB concentrations were found between differently aged Tenax, suggesting repeated use did not impact bioaccessible estimates provided by Tenax. Scanning electron microscope imaging revealed no significant changes in the visible surface area of the Tenax beads after aging (F_{6, 203} = 1.434, p = 0.203), suggesting no significant changes in the Tenax phase volume resulting in consistent estimates of bioaccessibility through repeated use. Given the strong correlations between single-point Tenax extractable and tissue concentrations, providing data to detail the reusability of Tenax in repeated extractions further demonstrates the applicability of this extraction technique in risk assessment.

Evaluating the adsorption performance of Tenax TA® in different containers: An isolation tool to study the bioaccessibility of nitro-PAHs in spiked soil

The improved in vitro gastrointestinal simulation methods, with the addition of the adsorption sink, are considered as a promising tool for predicting the bioaccessibility of contaminants. However, the problem associated with the recovery of the adsorption sink from the complex matrix needs more understand. Although previous studies tried to solve this shortcoming by using the containers (a vessel to hold the adsorption sink), there is no systematic comparison study on the impact of containers on bioaccessibility till now, especially for nitro-polycyclic aromatic hydrocarbons (nitro-PAHs). In order to understand the problem, commonly used containers in previous studies (dialysis bags and stainless-steel screen) were selected and deployed in the Fed Organic Estimation Human Simulation Test (FOREhST) method to compare the effects of these containers on the bioaccessibility of nitro-PAHs desorbed from the five different types of soils into the gastrointestinal fluid (GIF). Results showed that in order to maintain a constant sorptive gradient for the high molecular weight (MW) nitro-PAHs, 0.25 g of Tenax TA® were required in FOREhST. Compared with Tenax TA® encapsulated in dialysis bag (Tenax-EDBG), the use of Tenax TA® encapsulated in dissolution basket (Tenax-EDBT) significantly increased the bioaccessibility of nitro-PAHs in the soil from 5.6-31.4% to 17.2-70.6%, due to the better diffusion performance. The bioaccessibility of nitro-PAHs by FOREhST extraction with Tenax-EDBT showed a significant negative correlation with soil total organic carbon (TOC), whereas a weak correlation with pH. This study provides the researchers with a more standardized in vitro method to quantify the bioaccessibility of PAHs and their derivatives in soil.

Occurrence and exposure risk assessment of organic micropollutants in indoor dust from Malaysia

Indoor dust is an important source of human exposure to hazardous organic micropollutants (OMPs) because humans spend about 90 % of their time in the indoor environments. This study initially analyzed the concentrations and compositions of OMPs in the dust of different indoor environments from Kuala Lumpur, Malaysia. A total of 57 OMPs were detected and assigned to 7 chemical classes in this study. The total concentration of OMPs ranged from 5980 to 183,000 ng/g, with the median concentration of 46,400 ng/g. Personal care products, organophosphate esters, and pesticides were the dominant groups, with their median concentrations at 12,000, 10,000, and 5940 ng/g, respectively. The concentrations and compositions of influential OMPs varied in different microenvironments, suggesting different sources and usage patterns in the house. Then, the noncarcinogenic and carcinogenic risks of exposure to these substances for diverse age groups were assessed based on the median concentration. Cumulative noncarcinogenic risks of these OMPs via ingestion pathway were estimated to be negligible (1.41 × 10^-4 - 1.87 × 10^-3). The carcinogenic risks of these OMPs were higher than 10^-6 (1.63 × 10^-6 - 6.17 × 10^-6) and should be noted. Theobromine accounted for more than 89 % of the cumulative cancer risk, implying that the carcinogenic risk of theobromine needs further monitoring in the future. Toddler was the most affected group for cancer risk among all the age groups, regardless of the microenvironments. These findings from this study may provide a benchmark for future efforts to ensure the safety of indoor dust for the local residents.

Past, present, and future perspectives on the assessment of bioavailability/bioaccessibility of polycyclic aromatic hydrocarbons: A 20-year systemic review based on scientific econometrics

Bioaccessibility/bioavailability (bioac-bioav) is an important criterion in the risk assessment of polycyclic aromatic hydrocarbons (PAHs), especially in the restoration of contaminated sites. Although, the bioac-bioav concept is widely employed in PAH risk assessment for both humans and wildlife, their growth and integration in risk assessment models are seldom discussed. Consequently, the relevant literature listed on Web of Science (WOS)™ was retrieved and analyzed using the bibliometric software Citespace in order to gain a comprehensive understanding of this issue. Due to the limitations of the literature search software, we manually searched the articles about PAHs bioac-bioav that were published before 2000. This stage focuses on research on the distribution coefficient of PAHs between different environmental phases and laid the foundation for the adsorption-desorption of PAHs in subsequent studies of the bioac-bioav of PAHs. The research progress on PAH bioac-bioav from 2000 to the present was evaluated using the Citespace software based on country- and discipline-wise publication volumes and research hotspots. The development stages of PAH bioac-bioav after 2000 were divided into four time segments. The first three segments (2000-2005, 2006-2010, and 2011-2015) focused on the degradation of PAHs and their in vivo (bioavailability)-in vitro (bioaccessibility) evaluation method and risk assessment. Meanwhile, the current (2016-present) research focuses on the establishment of analytical methods for assessing PAH derivatives at environmental concentrations and the optimization of various in vitro digestion methods, including chemical optimization (sorptive sink) and biological optimization (Caco-2 cell). The contents are aimed at supplying researchers with a deeper understanding of the development of PAH bioac-bioav.

A review on in-vitro oral bioaccessibility of organic pollutants and its application in human exposure assessment

Generally, human oral exposure assessments of contaminants have not considered the absorption factor in the human gastrointestinal tract, thus overestimating human exposure and associated health risk. Currently, more researchers are adding the absorption factor into human exposure assessment, and bioaccessibility measured by in-vitro methods is generally replacing bioavailability for estimation because of the cheap and rapid determination. However, no single unified in-vitro method is used for bioaccessibility measurement of organic pollutants, although several methods have been developed for these pollutants and have shown good in vitro-in vivo correlation between bioaccessibility and bioavailability. The present review has focused on the development of in-vitro methods, validation of these methods through in-vivo assays, determination of factors influencing bioaccessibility, application of bioaccessibility in human exposure assessment, and the challenges faced. Overall, most in-vitro methods were validated using bioavailability, and better in vitro-in vivo correlations were obtained when absorption sinks were added to the digestion solution to mimic dynamic absorption of organic chemicals by small intestine. Incorporating bioaccessibility into the estimation of human exposure by oral ingestion significantly decreases the estimated exposure dose. However, more investigations on bioaccessibility of hydrophobic organic compounds are urgently needed because many challenges for in-vitro methods remain to be overcome.

Membrane Enhanced Bioaccessibility Extraction (MEBE) of hydrophobic soil pollutants - Using a semipermeable membrane for separating desorption medium and acceptor solvent

Bioaccessibility extractions are increasingly applied to measure the fraction of pollutants in soil, sediment and biochar, which can be released under environmentally or physiologically relevant conditions. However, the bioaccessibility of hydrophobic organic chemicals (HOCs) can be markedly underestimated when the sink capacity of the extraction medium is insufficient. Here, a novel method called "Membrane Enhanced Bioaccessibility Extraction" (MEBE) applies a semipermeable membrane to physically separate an aqueous desorption medium that sets the desorption conditions from an organic medium that serves as acceptor phase and infinite sink. The specific MEBE method combines HOC (1) desorption into a 2-hydroxypropyl-β-cyclodextrin solution, (2) transfer through a low-density polyethylene (LDPE) membrane and (3) release into ethanol, serving as analytical acceptor phase. The surface to volume ratio within the LDPE membrane is maximized for rapid depletion of desorbed molecules, and the capacity ratio between the acceptor phase and the environmental sample is maximized to achieve infinite sink conditions. Several experiments were conducted for developing, optimizing and pre-testing the method, which was then applied to four soils polluted with polycyclic aromatic hydrocarbons. MEBE minimized sample preparation and yielded a solvent extract readily analyzable by HPLC. This study focused on the proof-of-principle testing of the MEBE concept, which now can be extended and applied to other samples and desorption media.

Fabrication and characterization of pyridinium functionalized anion exchange membranes for acid recovery

In the present work, the fabrication of pyridinium functionalized anion exchange membranes (AEMs) for acid recovery using diffusion dialysis (DD) processes was developed using brominated poly (2,6-dimethyl-1,4-phenylene oxide) (BPPO) as a polymer backbone and 4-methylpyridine (MP) as an ion exchange element. The electrochemical and physiochemical properties of the developed AEMs were tested under various concentration of MP into the polymer matrix. Water uptake (W_R) of 17.18% to 30.55%, ion exchange capacity (IEC) of 1.94-2.24 mmol/g and linear swelling ratio (LSR) of 6.87-14.89% were obtained. In addition, the new membranes exhibited dense morphology, higher thermal and chemical stability in addition to dimensional and mechanical sturdiness. Acid dialysis coefficient (U_H) in the range of 0.011-0.066 m/h was obtained. In addition the developed AEMs had a separation factor (S) in range of 24.87-77.61 resulting in enhanced DD performance compared to commercial membrane DF-120B under comparable experimental conditions. The new prepared membranes showed potential for successful application in acid recovery via diffusion dialysis.

Biochar combined with compost to reduce the mobility, bioavailability and plant uptake of 2,2',4,4'-tetrabrominated diphenyl ether in soil

Biochar application to soil is recognised for its capacity to immobilise pollutants (through sorption) while composted inputs can accelerate the biodegradation of organic pollutants. However, little is known about the influence of combined incorporation on plant uptake of organic pollutants. Therefore, we investigated the effects of maize straw-derived biochar (MSB), compost derived from maize straw and pig manure (SMC), and their combination (MSB-SMC) as soil amendments on bioavailability of 2,2',4,4'-tetrabrominated diphenyl ether (BDE-47) and carrot (Daucus carota L.) uptake in a horticultural soil. We found that biochar alone performed well in reducing BDE-47 bioavailability, but was less effective at degrading the pollutant. Conversely, addition of compost stimulated BDE-47 biodegradation. MSB-SMC enhanced BDE-47 biodegradation in soil, reduced contamination of carrot roots, and caused significant reductions in soil extractable BDE-47. The combination of contrasting approaches to remediation thus resulted in the most favorable outcome for a contaminated soil: immobilisation of contaminant from vegetable crops (via biochar) with simultaneous bioremediation of the growing medium. These findings point towards an effective strategy for reducing plant uptake of PDBEs through the combined use of biochar and compost as soil amendment - reducing mobility and facilitating degradation of the accessible contaminant fractions.

Reducing plant uptake of a brominated contaminant (2,2',4,4'‑tetrabrominated diphenyl ether) by incorporation of maize straw into horticultural soil

Application of crop residues is a conventional practice that contributes to crop production through nutrient returns and other benefits to soil health: driving soil physicochemical and biological functions. However, little is known about the impacts of straw residue incorporation on the bioavailability of organic pollutants and associated changes in microbial community structure in contaminated soils. In this study, maize straw was added to a soil contaminated with a model polybrominated diphenyl ether (BDE-47). A pot experiment was conducted and planted with carrot (Daucus carota L.). We found that straw addition greatly reduced the bioavailability of BDE-47, changed the bacterial community structure and affected a range of soil physiochemical properties. Moreover, the amount of BDE-47 that had accumulated in carrot roots and aboveground tissues was significantly reduced. This study may therefore describe an effective agronomic strategy to reduce the bioavailability of polybrominated diphenyl ethers (PBDEs) in a soil used to grow high value vegetable crops. This strategy draws on traditional wisdom and shows promise as a practical method to support horticultural production systems, remediate soils, and help to ensure food safety.

Relationships between the bioavailability of polybrominated diphenyl ethers in soils measured with female C57BL/6 mice and the bioaccessibility determined using five in vitro methods

Several in vitro methods for simulating human gastrointestinal digestion have been validated for predicting the bioavailability of heavy metals, but the methods for successfully predicting the bioavailability of organic pollutants are still limited. In this study, we used an adapted fasting in vitro digestion method (Fa-VDM) from the Simulator of the Human Intestinal Microbial Ecosystem and four other in vitro methods comprising In Vitro Gastrointestinal, a physiologically-based extraction test, the unified BARGE method, and Deutsches Institut für Normung e.V. in order to measure the bioaccessibility of polybrominated diphenyl ethers (PBDEs) in soils from an e-waste dismantling town, China, with a Standard Reference Material (SRM2585) as the control. Furthermore, the bioaccessibility data were compared with the bioavailability measured using female C57BL/6 mice. The bioavailability of PBDEs in the soils and SRM2585 were 1.7% to 38.1% and 3.9% to 48.8%, respectively, and the bioaccessibility determined using Fa-VDM were 1.6-55.4% and 6.7-32.1%. There were negative and parabolic correlations between octanol/water partition coefficient for PBDEs and the bioavailability and bioaccessibility, respectively, whereas the H/C ratios and organic matter contents of the soils did not correlate with them. The bioaccessibility data determined by Fa-VDM were generally higher than those obtained using the other four methods, mainly due to the higher bile concentration and larger liquid to solid ratio in the digestion solution in Fa-VDM. There was a significant linear relationship between the results according to the in vivo and in vitro method of Fa-VDM where the slopes varied from 0.83 to 1.16 (R² > 0.73) and intercepts from 0.3%-7.7% for BDE47, 99, 100, and 153 measured using Fa-VDM, thereby indicating that the bioaccessibility assessed by this method can potentially be used to predict the bioavailability of moderately brominated congeners in soils.

Oral bioaccessibility of semi-volatile organic compounds (SVOCs) in settled dust: A review of measurement methods, data and influencing factors

Many semi-volatile organic compounds (SVOCs), suspected of reprotoxic, neurotoxic or carcinogenic effects, were measured in indoor settled dust. Dust ingestion is a non-negligible pathway of exposure to some of these SVOCs, and an accurate knowledge of the real exposure is necessary for a better evaluation of health risks. To this end, the bioaccessibility of SVOCs in dust needs to be considered. In the present work, bioaccessibility measurement methods, SVOCs' oral bioaccessibility data and influencing factors were reviewed. SVOC bioaccessibilities (%) ranged from 11 to 94, 8 to 100, 3 to 92, 1 to 81, 6 to 52, and 2 to 17, for brominated flame retardants, organophosphorus flame retardants, polychlorobiphenyls, phthalates, pesticides and polycyclic aromatic hydrocarbons, respectively. Measurements method produced varying results depending on the inclusion of food and/or sink in the model. Characteristics of dust, e.g., organic matter content and particle size, also influenced bioaccessibility data. Last, results were influenced by SVOC properties, such as octanol/water partition coefficient and migration pathway into dust. Factors related to dust and SVOCs could be used in prediction models. To this end, more bioaccessibility studies covering more substances should be performed, using methods that are harmonized and validated by comparison to in-vivo studies.