Profiles of bacterial assemblages from microplastics of tropical coastal environments

Increasing microplastics pollution: An emerging vector for potentially pathogenic bacteria in the environment

Microplastics (MP), plastic particles <5 mm, are of global concern due to their worldwide distribution and potential repercussions on ecosystems and human well-being. In this study, MP were collected from the urbanized Susurluk basin in Türkiye to evaluate their vector function for bacterial biofilms, both in the wet and dry seasons. Bacterial biofilms were predominantly found on polyethylene (PE), polypropylene (PP), and polystyrene (PS), which constitute the most common MP types in the region. Specific potentially pathogenic bacterial genera, including Pseudomonas sp., Comamonas sp., Salmonella spp., and Shigella spp., were prevalent on MP surfaces. Notably, PE and PP harboured numerous genera of potential human and/or animal origin such as Staphylococcus, Proteus, Escherichia, Enterococcus, and Enterobacter. Water quality played a pivotal role in bacterial biofilm formation on MP. Higher salinity in estuarine areas reduced bacterial abundance on MP, while the more polluted freshwater Nilüfer Stream harboured a higher abundance of total bacteria, particularly of potentially pathogenic strains. Seasonal variations, ambient water conditions, and polymer type are all factors that could influence bacterial colonization on MPs. This catchment-wide evaluation, which includes various habitat types (lentic and lotic systems), the enrichment of cultivable viable bacteria on microplastics (MPs) - a key factor in the spread of pathogens - has significant implications for both environmental and public health. Unlike controlled laboratory experiments or in-situ studies with various particles, this study emphasized the dynamic and complex nature of bacterial strains on MPs, which varied depending on seasonal dynamics and antropogenic impacts in open systems. Further research is needed to thoroughly investigate to fully explore the complex interactions among MPs, microbial communities, and their ecological roles, especially in the context of changing environmental factors across entire river catchments.

Environmental Health and Safety Implications of the Interplay Between Microplastics and the Residing Biofilm

The increasing prevalence of microplastics in the environment has raised concerns about their potential environmental and health implications. Biofilms readily colonize microplastics upon their entry into the environment, altering their surface characteristics. While most studies have explored how biofilms influence the adsorption and transportation of other contaminants by microplastics, the reciprocal interplay between microplastics and biofilms and the resulting ecological risks remain understudied. This review comprehensively reviews the impact of microplastic properties on biofilm formation and composition, including the microbial community structure. We then explore the dynamic interactions between microplastics and biofilms, examining how biofilms alter the physicochemical properties, migration, and deposition of microplastics. Furthermore, we emphasize the potential of biofilm-colonized microplastics to influence the environmental fate of other pollutants. Lastly, we discuss how biofilm-microplastic interactions may modify the bioavailability, biotoxicity, and potential health implications of microplastics.

Potentially pathogenic bacteria in the plastisphere from water, sediments, and commercial fish in a tropical coastal lagoon: An assessment and management proposal

Microplastics in aquatic ecosystems harbor numerous microorganisms, including pathogenic species. The ingestion of these microplastics by commercial fish poses a threat to the ecosystem and human livelihood. Coastal lagoons are highly vulnerable to microplastic and microbiological pollution, yet limited understanding of the risks complicates management. Here, we present the main bacterial groups, including potentially pathogenic species, identified on microplastics in waters, sediments, and commercial fish from Ciénaga Grande de Santa Marta (CGSM), the largest coastal lagoon in Colombia. DNA metabarcoding allowed identifying 1760 bacterial genera on microplastics, with Aeromonas and Acinetobacter as the most frequent and present in all three matrices. The greatest bacterial richness and diversity were recorded on microplastics from sediments, followed by waters and fish. Biochemical analyses yielded 19 species of potentially pathogenic culturable bacteria on microplastics. Aeromonas caviae was the most frequent and, along with Pantoea sp., was found on microplastics in all three matrices. Enterobacter roggenkampii and Pseudomonas fluorescens were also found on microplastics from waters and fish. We propose management strategies for an Early Warning System against microbiological and microplastic pollution risks in coastal lagoons, illustrated by CGSM. This includes forming inter-institutional alliances for research and monitoring, accompanied by strengthening governance and health infrastructures.

The microbial communities of the rust layer were influenced by seawater microbial communities

To reveal the responsible microorganisms of microbiologically-influenced-corrosion (MIC), using 16S rRNA and ITS sequencing techniques, we investigated the bacterial and fungal communities in rust layer and seawater. Results show that the corrosion-related genera of Erythrobacter, norank_f__Rhodothermaceae, and Acinetobacter bacteria, as well as Aspergillus fungi, were overrepresented in the rust layer, along with the Pseudoalteromonas and Marinobacterium bacteria in seawater, and Ramlibacter, Aquimarina, and Williamsia bacteria were first detected in the rust layer. SourceTracker analysis revealed that approximately 23.08% of bacteria and 21.48% of fungi originated from seawater. Stochastic processes governed the rust layer and seawater microbial communities, and network analysis showed coexistence and interaction among bacterial and fungal communities. These results indicate that the composition of microbial communities in the rust layer was influenced by the marine environmental microbial communities, which can provide basic data support for the control of MIC in marine-related projects.

Selective colonization of microplastics, wood and glass by antimicrobial-resistant and pathogenic bacteria

The Plastisphere is a novel niche whereby microbial communities attach to plastic debris, including microplastics. These communities can be distinct from those found in the surrounding environment or those attached to natural substrates and may serve as a reservoir of both pathogenic and antimicrobial-resistant (AMR) bacteria. Owing to the frequent omission of appropriate comparator particles (e.g. natural substrates) in previous studies, there is a lack of empirical evidence supporting the unique risks posed by microplastics in terms of enrichment and spread of AMR pathogens. This study investigated selective colonization by a sewage community on environmentally sampled microplastics with three different polymers, sources and morphologies, alongside natural substrate (wood), inert substrate (glass) and free-living/planktonic community controls. Culture and molecular methods (quantitative polymerase chain reaction (qPCR)) were used to ascertain phenotypic and genotypic AMR prevalence, respectively, and multiplex colony PCR was used to identify extra-intestinal pathogenic Escherichia coli (ExPECs). From this, polystyrene and wood particles were found to significantly enrich AMR bacteria, whereas sewage-sourced bio-beads significantly enriched ExPECs. Polystyrene and wood were the least smooth particles, and so the importance of particle roughness on AMR prevalence was then directly investigated by comparing the colonization of virgin vs artificially weathered polyethylene particles. Surface weathering did not have a significant effect on the AMR prevalence of colonized particles. Our results suggest that the colonization of plastic and non-plastic particles by AMR and pathogenic bacteria may be enhanced by substrate-specific traits.

Colonization characteristics and surface effects of microplastic biofilms: Implications for environmental behavior of typical pollutants

This paper summarizes the colonization dynamics of biofilms on microplastics (MPs) surfaces in aquatic environments, encompassing bacterial characteristics, environmental factors affecting biofilm formation, and matrix types and characteristics. The interaction between biofilm and MPs was also discussed. Through summarizing recent literatures, it was found that MPs surfaces offer numerous benefits to microorganisms, including nutrient enrichment and enhanced resistance to environmental stress. Biofilm colonization changes the surface physical and chemical properties as well as the transport behavior of MPs. At the same time, biofilms also play an important role in the fragmentation and degradation of MPs. In addition, we also investigated the coexistence level, adsorption mechanism, enrichment, and transformation of MPs by environmental pollutants mediated by biofilms. Moreover, an interesting aspect about the colonization of biofilms was discussed. Biofilm colonization not only had a great effect on the accumulation of heavy metals by MPs, but also affects the interaction between particles and environmental pollutants, thereby changing their toxic effects and increasing the difficulty of MPs treatment. Consequently, further attention and research are warranted to delve into the internal mechanisms, environmental risks, and the control of the coexistence of MPs and biofilms.

The assembly and ecological roles of biofilms attached to plastic debris of Ashmore reef

Plastic pollution in the ocean is a global environmental hazard aggravated by poor management of plastic waste and growth of annual plastic consumption. Microbial communities colonizing the plastic's surface, the plastisphere, has gained global interest resulting in numerous efforts to characterize the plastisphere. However, there are insufficient studies deciphering the underlying metabolic processes governing the function of the plastisphere and the plastic they reside upon. Here, we collected plastic and seawater samples from Ashmore Reef in Australia to examine the planktonic microbes and plastic associated biofilm (PAB) to investigate the ecological impact, pathogenic potential, and plastic degradation capabilities of PAB in Ashmore Reef, as well as the role and impact of bacteriophages on PAB. Using high-throughput metagenomic sequencing, we demonstrated distinct microbial communities between seawater and PAB. Similar numbers of pathogenic bacteria were found in both sample types, yet plastic and seawater select for different pathogen populations. Virulence Factor analysis further illustrated stronger pathogenic potential in PAB, highlighting the pathogenicity of environmental PAB. Furthermore, functional analysis of Kyoto Encyclopedia of Genes and Genomes (KEGG) metabolic pathways revealed xenobiotic degradation and fatty acid degradation to be enriched in PABs. In addition, construction of metagenome-assembled genomes (MAG) and functional analysis further demonstrated the presence of a complete Polyethylene (PE) degradation pathway in multiple Proteobacteria MAGs, especially in Rhodobacteriaceae sp. Additionally, we identified viral population presence in PAB, revealing the key role of bacteriophages in shaping these communities within the PAB. Our result provides a comprehensive overview of the various ecological processes shaping microbial community on marine plastic debris.

Evaluation of prokaryotic and eukaryotic microbial communities on microplastic-associated biofilms in marine and freshwater environments

Microplastics (MPs) are major concern due to their potential harm to ecosystems and most research has focused on their presence and fate, with limited attention to their biodegradation in aquatic ecosystems. Nevertheless, MPs act as hotspots for the colonization by a diverse range of microorganisms that can adhere to plastic surfaces, resulting in the subsequent formation of biofilms-a potential threat especially in terms of pathogenicity. This study employed 16S rRNA and 18S rRNA sequencing metagenomic analyses to investigate microbial communities within biofilms on plastic materials exposed to long-term marine and freshwater environments. Three Arcobacter species (Arcobacter nitrofigilis, Arcobacter acticola, and Arcobacter suis) emerged as dominant species in M_MP sample, while Flavobacterium tructae was the predominant species within the F_MP sample. The 18S rRNA sequencing revealed the presence of the fungal phylum Ascomycota and the microalgal species Pseudocharaciopsis ovalis in F_MP. Although, the primary species detected on M_MP and F_MP samples include bacteria previously implicated as pathogen, the predominant species identified in this study were unconnected to MP-associated biofilms or MP degradation. Their presence constitutes a novel discovery, opening promising avenues for the exploration of their potential involvement in the biodegradation of MPs within aquatic environments.

Exploring changes in microplastic-associated bacterial communities with time, location, and polymer type in Liusha Bay, China

Microplastics have become a widespread concern within marine environments and are particularly evident in aquaculture regions that are characterized by plastic accumulation. This study employed 16 S rDNA sequencing to investigate the dynamic succession of microbial communities colonizing polyvinyl chloride (PVC), polystyrene (PS), and polyamide (PA) microplastics in seawater, when subjected to varying exposure durations in the Liusha Bay aquaculture region. Results revealed that the composition of microplastics microbial communities varied remarkably across geographical locations and exposure times. With an increase in exposure duration, both the diversity and richness of bacterial communities colonizing microplastics significantly increased, microbial communities show adaptations to the plastisphere. The type of microplastics had a significant effect on the community structure characteristicsof bacteria attached to their surfaces, with inconsistent trends in the relative abundance of different genera on different substrates. Notably, microplastic surfaces harbored a significant abundance of hydrocarbon-degrading bacteria, exemplified by Erythrobacter. These findings underscore the potential of microplastics as unique microbial niches. Meanwhile, long-term exposure experiments also offer the possibility of screening for plastic-degrading bacteria. In addition, the presence of the pathogenic bacterium Vibrio was detected in all microplastic samples, implying that microplastics could serve as carriers for pathogenic dissemination. This underscores the urgency of addressing the risk posed by the proliferation of harmful bacteria on microplastic surfaces. Overall, this study enhances our understanding of microbial community dynamics on microplastics under diverse conditions. It contributes to the broader comprehension of plastisphere microbial ecosystems in the marine environment, thereby addressing critical environmental implications.

Anthropogenic particle abundance and characteristics in seawater and intertidal sediments of the Tonkin Bay Coast (North Vietnam)

Microplastics (MPs, plastic items from 1 µm to 5 mm in size) are present in all environmental compartments. The evaluation of their concentration, fate, and spatial distribution is still a challenge for the scientific community. This concern is just debuting in developing countries, (i.e., Asia, South America, and Africa). This study deals with the MP contamination in the abiotic marine compartments of Northern Vietnam: seawater and intertidal sediments. Four sites located in the intertidal zone or near the coastline in Tonkin Bay, Vietnam were studied. A total of 16 samples (eight for each compartment) were collected in July 2020 (rainy season) and January 2021 (dry season). Anthropogenic particles (total observed fibers and fragments) were found at levels ranging from 3 to 303 particles/m3 in seawater and from 63 to 955 particles/kg dry weight in sediments. Most of these were fibers less than 300-µm long. Higher levels of seawater at the Nam Dinh site were found in the rainy season compared to the dry one. As the river flow was estimated six times higher during the rainy season than during the dry season, these results suggest the river discharge is a potential source of contamination for the coastal zone. The temporal variability was lower for the sediments than for the seawater, suggesting the long-term integration of the anthropogenic particles in this compartment. A small portion of sorted particles were analyzed by µFTIR (8.35%), and this sub-sample was only composed of fragments. Still, fragments were mostly composed of polypropylene (PP, 82%), polyethylene (PE, 9%), and polystyrene (PS, 9%). The fragment size was similar in the two studied compartments, but it was dependent on polymer types since PS fragments (140 ± 17 µm) were smaller than those made of PE (622 ± 123 µm) and PP (869 ± 905 µm). Future works should investigate the smallest fraction of MP (even nanoplastics) as well as find solutions in order to mitigate MP contamination in the marine environment.

Microbial hitchhikers on microplastics: The exchange of aquatic microbes across distinct aquatic habitats

Microplastics (MPs) have the potential to modify aquatic microbial communities and distribute microorganisms, including pathogens. This poses a potential risk to aquatic life and human health. Despite this, the fate of 'hitchhiking' microbes on MPs that traverse different aquatic habitats remains largely unknown. To address this, we conducted a 50-day microcosm experiment, manipulating estuarine conditions to study the exchange of bacteria and microeukaryotes between river, sea and plastisphere using a long-read metabarcoding approach. Our findings revealed a significant increase in bacteria on the plastisphere, including Pseudomonas, Sphingomonas, Hyphomonas, Brevundimonas, Aquabacterium and Thalassolituus, all of which are known for their pollutant degradation capabilities, specifically polycyclic aromatic hydrocarbons. We also observed a strong association of plastic-degrading fungi (i.e., Cladosporium and Plectosphaerella) and early-diverging fungi (Cryptomycota, also known as Rozellomycota) with the plastisphere. Sea MPs were primarily colonised by fungi (70%), with a small proportion of river-transported microbes (1%-4%). The mere presence of MPs in seawater increased the relative abundance of planktonic fungi from 2% to 25%, suggesting significant exchanges between planktonic and plastisphere communities. Using microbial source tracking, we discovered that MPs only dispersed 3.5% and 5.5% of river bacterial and microeukaryotic communities into the sea, respectively. Hence, although MPs select and facilitate the dispersal of ecologically significant microorganisms, drastic compositional changes across distinct aquatic habitats are unlikely.

Combined effects of polystyrene nanoplastics and lipopolysaccharide on testosterone biosynthesis and inflammation in mouse testis

Microplastics (MPs)/nanoplastics (NPs), as a source and vector of pathogenic bacteria, are widely distributed in the natural environments. Here, we investigated the combined effects of polystyrene NPs (PS-NPs) and lipopolysaccharides (LPS) on testicular function in mice for the first time. 24 male mice were randomly assigned into 4 groups, control, PS-NPs, LPS, and PS-NPs + LPS, respectively. Histological alterations of the testes were observed in mice exposed to PS-NPs, LPS or PS-NPs + LPS. Total sperm count, the levels of testosterone in plasma and testes, the expression levels of steroidogenic acute regulatory (StAR) decreased more remarkable in testes of mice treated with PS-NPs and LPS than the treatment with LPS or PS-NPs alone. Compared with PS-NPs treatment, LPS treatment induced more sever inflammatory response in testes of mice. Moreover, PS-NPs combined with LPS treatment increased the expression of these inflammatory factors more significantly than LPS treatment alone. In addition, PS-NPs or LPS treatment induced oxidative stress in testes of mice, but their combined effect is not significantly different from LPS treatment alone. These results suggest that PS-NPs exacerbate LPS-induced testicular dysfunction. Our results provide new evidence for the threats to male reproductive function induced by both NPs and bacterial infection in human health.

Selection for antimicrobial resistance in the plastisphere

Microplastics and antimicrobials are widespread contaminants that threaten global systems and frequently co-exist in the presence of human or animal pathogens. Whilst the impact of each of these contaminants has been studied in isolation, the influence of this co-occurrence in driving antimicrobial resistance (AMR)1 in microplastic-adhered microbial communities, known as 'the Plastisphere', is not well understood. This review proposes the mechanisms by which interactions between antimicrobials and microplastics may drive selection for AMR in the Plastisphere. These include: 1) increased rates of horizontal gene transfer in the Plastisphere compared with free-living counterparts and natural substrate controls due to the proximity of cells, co-occurrence of environmental microplastics with AMR selective compounds and the sequestering of extracellular antibiotic resistance genes in the biofilm matrix. 2) An elevated AMR selection pressure in the Plastisphere due to the adsorbing of AMR selective or co-selective compounds to microplastics at concentrations greater than those found in surrounding mediums and potentially those adsorbed to comparator particles. 3) AMR selection pressure may be further elevated in the Plastisphere due to the incorporation of antimicrobial or AMR co-selective chemicals in the plastic matrix during manufacture. Implications for both ecological functioning and environmental risk assessments are discussed, alongside recommendations for further research.

Plankton assemblages from microplastics of tropical coastal environments reveal high diversity and evidence of toxic species

Microplastics are a major constituent of plastic waste and are of an increasing global concern. Although microplastics are prevalent in marine ecosystems, the characterisation of plankton communities has been largely neglected in this aspect, especially in tropical ecosystems. To better understand the role of microplastics as a carrier of harmful plankton in marine ecosystems, epiplastic plankton communities in tropical marine ecosystems were studied from beach sediments along the Johor and Singapore Straits. Complementary analysis of microscopy and high throughput sequencing of the 16S rRNA (V3-V4) and 18S (V4) rRNA regions provided evidence that the plastisphere provided an appropriate environment to host a wide range of planktonic organisms. An average of 781 OTUs were identified across the three sampling sites. The structures of plankton communities were distinct across the sampling sites and were generally dominated by dinoflagellates, fungi and chlorophytes. We demonstrate that marine microplastics serve as microhabitats that are a host to harmful phytoplankton species, including viable resting cysts of dinoflagellates. Furthermore, plastics isolated from the location with the greatest anthropogenic influence demonstrated the greatest plankton diversity. This study presents evidence of diverse toxic plankton species present on the plastisphere and highlights its importance as a vector of the transport of harmful opportunistic species in relation to anthropogenic influence, in the marine environment.

Freshwater plastispheres as a vector for foodborne bacteria and viruses

There is growing evidence that plastic particles can accumulate microorganisms that are pathogenic to humans or animals. In the current study, the composition of the plastispheres that accumulated on polypropylene (PP), polyvinyl chloride (PVC), and high-density polyethylene (HDPE) pieces submerged in a river in the southeast Norway was characterized by 16S rRNA amplicon sequencing. Seasonal and geographical effects on the bacterial composition of the plastisphere were identified, in addition to the detection of potential foodborne pathogenic bacteria and viruses as part of the plastisphere. The diversity and taxonomic composition of the plastispheres were influenced by the number of weeks in the river, the season, and the location. The bacterial diversity differed significantly in the plastisphere from June and September, with a generally higher diversity in June. Also, the community composition of the plastisphere was significantly influenced by the geographical location, while the type of plastic had less impact. Plastics submerged in river water assembled a variety of microorganisms including potentially pathogenic bacteria and viruses (noro- and adenovirus) detected by qPCR. Cultivation methods detected viable bacteria such as Escherichia coli and Listeria monocytogenes. The results highlight the need for additional research on the risk of contaminating food with plastic particles colonized with human pathogens through irrigation water.

Microplastics (≤ 10 μm) bioaccumulation in marine sponges along the Moroccan Mediterranean coast: Insights into species-specific distribution and potential bioindication

Microplastics (MPs) are pervasive in marine environments and widely recognized as emerging environmental pollutants due to the multifaceted risks they exert on living organisms and ecosystems. Sponges (Phylum Porifera) are essential suspension-feeding organisms that may be highly susceptible to MPs uptake due to their global distribution, unique feeding behavior, and sedentary lifestyle. However, the role of sponges in MP research remains largely underexplored. In the present study, we investigate the presence and abundance of MPs (≤10 μm size) in four sponge species, namely Chondrosia reniformis, Ircinia variabilis, Petrosia ficiformis, and Sarcotragus spinosulus collected from four sites along the Mediterranean coast of Morocco, as well as their spatial distribution. MPs analysis was conducted using an innovative Italian patented extraction methodology coupled with SEM-EDX detection. Our findings reveal the presence of MPs in all collected sponge specimens, indicating a pollution rate of 100%. The abundance of MPs in the four sponge species ranged from 3.95×105 to 1.05×106 particles per gram dry weight of sponge tissue, with significant differences observed among sampling sites but no species-specific differences. These results imply that the uptake of MPs by sponges is likely influenced by aquatic environmental pollution rather than the sponge species themselves. The smallest and largest MPs were identified in C. reniformis and P. ficiformis, with median diameters of 1.84 μm and 2.57 μm, respectively. Overall, this study provides the first evidence and an important baseline for the ingestion of small MP particles in Mediterranean sponges, introducing the hypothesis that they may serve as valuable bioindicators of MP pollution in the near future.

Vibrio parahaemolyticus and Vibrio vulnificus in vitro biofilm dispersal from microplastics influenced by simulated human environment

Growing concerns exist regarding human ingestion of contaminated seafood that contains Vibrio biofilms on microplastics (MPs). One of the mechanisms enhancing biofilm related infections in humans is due to biofilm dispersion, a process that triggers release of bacteria from biofilms into the surrounding environment, such as the gastrointestinal tract of human hosts. Dispersal of cells from biofilms can occur in response to environmental conditions such as sudden changes in temperature, pH and nutrient conditions, as the bacteria leave the biofilm to find a more stable environment to colonize. This study evaluated how brief exposures to nutrient starvation, elevated temperature, different pH levels and simulated human media affect Vibrio parahaemolyticus and Vibrio vulnificus biofilm dispersal and processes on and from low-density polyethylene (LDPE), polypropylene (PP), and polystyrene (PS) MPs. Both species were able to adequately disperse from all types of plastics under most exposure conditions. V. parahaemolyticus was able to tolerate and survive the low pH that resembles the gastric environment compared to V. vulnificus. pH had a significantly (p ≤ 0.05) positive effect on overall V. parahaemolyticus biofilm biomass in microplates and cell colonization from PP and PS. pH also had a positive effect on V. vulnificus cell colonization from LDPE and PP. However, most biofilm biomass, biofilm cell and dispersal cell densities of both species greatly varied after exposure to elevated temperature, pH, and nutrient starvation. It was also found that certain exposures to simulated human media affected both V. parahaemolyticus and V. vulnificus biofilm biomass and biofilm cell densities on LDPE, PP and PS compared to exposure to traditional media of similar pH. Cyclic-di-GMP was higher in biofilm cells compared to dispersal cells, but exposure to more stressful conditions significantly increased signal concentrations in both biofilm and dispersal states. Taken together, this study suggests that human pathogenic strains of V. parahaemolyticus and V. vulnificus can rapidly disperse with high cell densities from different plastic types in vitro. However, the biofilm dispersal process is highly variable, species specific and dependent on plastic type, especially under different human body related environmental exposures.

Quorum sensing bacteria in microplastics epiphytic biofilms and their biological characteristics which potentially impact marine ecosystem

Microplastics (MPs) have been shown to be a new type of pollutant in the oceans, with complex biofilms attached to their surfaces. Bacteria with quorum sensing (QS) systems are important participants in biofilms. Such bacteria can secrete and detect signal molecules. When a signal molecule reaches its threshold level, bacteria with QS systems can perform several biological functions, such as biofilm formation and antibiotic metabolite production. However, the ecological effects of QS bacteria in biofilm as MPs distribute globally with ocean currents are not to be elucidate yet. In this study, polypropylene and polyvinyl chloride were selected for on-site enrichment to acquire microplastics with biofilms. Eight culturable QS bacteria in the resulting biofilm were isolated by using biosensor assays, and their biodiversity was analyzed. The profiles of the N-acyl-homoserine lactones (AHLs) produced by these bacteria were analyzed by using thin-layer chromatography (TLC)-bioautography and gas chromatography and mass spectrometry (GC-MS). Biofilm-forming properties and several biological characteristics, such as bacteriostasis, algal inhibition, and dimethylsulfoniopropionate (DMSP) degradation, were explored along with QS quenching. Results showed that QS bacteria were mainly affiliated with class Alphaproteobacteria, particularly Rhodobacteraceae, followed by class Gammaproteobacteria. TLC-bioautography and GC-MS analyses revealed that seven AHLs, namely, C6-HSL, C8-HSL, 3-oxo-C6-HSL, 3-oxo-C8-HSL, 3-oxo-C10-HSL, and two unidentified AHLs were produced. The QS system equipped bacteria with strong biofilm-forming capacity and may contribute to the keystone roles of Rhodobacteraceae. In addition, QS bacteria may exacerbate the adverse environmental effects of MPs, such as inducing the misfeeding of planktons on MPs. This study elucidated the diversity of QS bacteria in MP-associated biofilms and provided a new perspective of the effect of key membrane-forming bacteria on the marine ecological environment.

Laboratory tidal microcosm deciphers responses of sediment archaeal and bacterial communities to microplastic exposure

Microplastics (MPs) are 1-5 mm plastic particles that are serious global contaminants distributed throughout marine ecosystems. However, their impact on intertidal sediment microbial communities is poorly understood. In this study, we conducted a 30-day laboratory tidal microcosm experiment to investigate the effects of MPs on microbial communities. Specifically, we used the biodegradable polymers polylactic acid (PLA) and polybutylene succinate (PBS), as well as the conventional polymers polyethylene terephthalate (PET), polycarbonate (PC), and polyethylene (PE). Treatments with different concentrations (1-5%, w/w) of PLA- and PE-MPs were also included. We analyzed taxonomic variations in archaeal and bacterial communities using 16S rRNA high-throughput sequencing. PLA-MPs at concentrations of 1% (w/w) rapidly altered microbiome composition. Total organic carbon and nitrite nitrogen were the key physicochemical factors and urease was the major enzyme shaping MP-exposed sediment microbial communities. Stochastic processes predominated in microbial assembly and the addition of biodegradable MPs enhanced the contribution of ecological selections. The major keystone taxa of archaea and bacteria were Nitrososphaeria and Alphaproteobacteria, respectively. MPs exposure had less effect on archaeal functions while nitrogen cycling decreased in PLA-MPs treatments. These findings expanded the current understanding of the mechanism and pattern that MPs affect sediment microbial communities.

Sediment-driven plastisphere community assembly on plastic debris in tropical coastal and marine environments

Coastal habitats have been suggested to serve as a sink for unaccounted plastic debris, i.e., "missing plastic" in the sea, and hence, a hotspot of plastic pollution in the marine and coastal environments. Although the accumulation of plastic debris may pose significant threats to coastal ecosystems, we know little about the fate of these plastic debris and their ecological impacts due to the lack of studies on plastic-microbe interactions in coastal habitats, especially for the tropical marine and coastal environments. In this study, we collected plastic debris from 14 sites consisting of various coastal ecosystems (seagrass meadows, mangrove forests, and beaches), and marine ecosystem (coral reef) around Singapore and characterized the prokaryotic and eukaryotic microbial communities colonized on them. Our results showed that the composition of plastisphere communities in these intertidal ecosystems was predominantly influenced by the sediment than by the plastic materials. Compared with surrounding sediment and seawater, the plastic debris enriched potential plastic degraders, such as Muricauda, Halomonas, and Brevundimonas. The plastic debris was also found to host taxa that play significant roles in biogeochemical cycles (e.g., cyanobacteria, Erythrobacter), hygienically relevant bacteria (e.g., Chryseobacterium, Brevundimonas), and potential pathogens that may negatively impact the health of coastal ecosystems (e.g., Thraustochytriaceae, Labyrinthulaceae, Flavobacterium). Taken together, our study provides valuable insights into the plastic-microbe interactions in tropical coastal and marine ecosystems, highlighting the urgent need for plastisphere studies to understand the fate and ecological impacts of plastic debris accumulated in coastal habitats.

Surface-associated bacterial assemblages on marine anthropogenic litter in the intertidal zone of the Arabian Sea, India

Anthropogenic marine litter (mainly plastic pollution) is a serious concern globally. The interactions between terrestrial and marine ecosystems lead to the accumulation of marine litter in the intertidal zone. The biofilm-forming bacteria tend to colonize on surfaces of marine litter which are composed of diverse bacteria and are less studied. The present study investigated the bacterial community composition using both culturable and non-culturable (Next-generation sequencing (NGS)) approaches associated with the marine litter (polyethylene (PE), styrofoam (SF) and fabric (FB)) at three distinct locations (Alang, Diu and Sikka) of the Arabian Sea, Gujarat, India. Predominant bacteria observed using culturable and NGS techniques belonged to Proteobacteria phyla. Alphaproteobacteria class dominated on polyethylene and styrofoam surfaces in the culturable fraction among the sites while the Bacillus dominated fabric surfaces. In the metagenomics fraction, Gammaproteobacteria dominated the surfaces except for PE and SF surfaces from Sikka and Diu, respectively. The PE surface at Sikka was dominated by Fusobacteriia while SF surface from Diu was dominated by Alphaproteobacteria. Both culture-dependent and NGS approaches identified hydrocarbon-degrading bacteria as well as pathogenic bacteria on the surfaces. The outcome of the present study illustrates diverse bacterial assemblages which occur on marine litter and increases our understanding of the plastisphere community.

New insight into the effect of microplastics on antibiotic resistance and bacterial community of biofilm

Microplastics (MPs) could serve as substrates for microbial colonization and biofilm formation. However, research on the effects of different types of microplastics and natural substrates on biofilm formation and community structure in the presence of antibiotic-resistant bacteria (ARB) is limited. In this study, we employed by means of microcosm experiments to analyze the situation of biofilms conditions, bacterial resistance patterns, antibiotic resistance genes (ARGs) distribution, and bacterial community on different substrates using microbial cultivation, high throughtput sequencing and PCR. The result showed that biofilms on different substrates markedly increased with time, with MPs surfaces formed more biofilm than stone. Analyses of antibiotic resistant showed negligible differences in the resistance rate to the same antibiotic at 30 d, but tetB would be selectively enriched on PP and PET. The microbial communities associated with biofilms on MPs and stones exhibited variations during different stages of formation. Notably, phylum WPS-2 and Epsilonbacteraeota were identified as the dominant microbiomes of biofilms on MPs and stones at 30 d, respectively. Correlation analysis suggested that WPS-2 could potentially be a tetracycline-resistant bacterium, while Epsilonbacteraeota did not correlate with any detected ARB. Our results emphasized the potential threat posed by MPs as attachment carriers for bacteria, particularly ARB, in aquatic environments.

Plastisphere microbiome: Methodology, diversity, and functionality

Broad topics of the plastisphere in various environments are reviewed, including its methodologies, diversity, functionality, and outlook.

Plastisphere assemblages differ from the surrounding bacterial communities in transitional coastal environments

Marine plastic contamination is currently considered ubiquitous in aquatic environments. These particles present a resistant and hydrophobic substrate known to promote microbial colonisation and biofilm formation in aquatic ecosystems, the so-called "Plastisphere", raising concerns about its potential ecological risks. The novelty of this topic translates into a relatively low number of studies, including for transitional coastal ecosystems, such as sandy beaches or estuarine habitats. Therefore, a sampling campaign was conducted in two transitional coastal ecosystems - the Mondego estuary (Portugal) - and adjacent sandy beaches (winter 2020). After visual sorting and filtering of suspected particles under sterile conditions DNA extraction and 16S rRNA amplicon high throughput sequencing was used to profile the bacterial communities on the surface of plastic particles and from those found on the water and sediments from the sampled transitional coastal ecosystems. All particles were characterised according to type, colour and size, and the chemical nature of the particles was determined by FTIR-ATR or μ-FTIR spectroscopy after DNA extraction. All samples contained plastics in several sizes (micro and mesoplastics), shapes (higher abundances of fragments on beaches and fibres in the estuarine waters), colours and polymers. Although no significant differences were detected in the α-diversity indexes of the bacterial communities between plastics and their surrounding environments, data showed the occurrence of unique key bacterial groups on plastics from both environments, such as pathogens (e.g., Lactococcus, Staphylococcus and Streptococcus) and groups commonly associated with wastewater treatment plants (e.g., members of the phylum Firmicutes). This highlights the concerns for plastics to act as vectors of transmission and spread of these bacterial groups in transitional coastal ecosystems. Furthermore, it raises the possibility that (micro)plastics entering the estuary from the sea play a substantial contribution to overall dynamics of (micro)plastics and their microbial assemblages in the estuarine system.

Nano/micro-plastics: Sources, trophic transfer, toxicity to the animals and humans, regulation, and assessment

Being in an era of revolutionized production, consumption, and poor management of plastic waste, the existence of these polymers has resulted in an accumulation of plastic litter in nature. With macro plastics themselves being a major issue, the presence of their derivatives like microplastics which are confined to the size limitations of less than 5mm has ascended as a recent type of emergent contaminant. Even though there is size confinement, their occurrence is not narrowed and is extensively seen in both aquatic and terrestrial extents. The vast incidence of these polymers causing harmful effects on various living organisms through diverse mechanisms such as entanglement and ingestion have been reported. The risk of entanglement is mainly limited to smaller animals, whereas the risk associated with ingestion concerns even humans. Laboratory findings indicate the alignment of these polymers toward detrimental physical and toxicological effects on all creatures including humans. Supplementary to the risk involved with their presence, plastics also proceed as carters of certain toxic contaminants complemented during their industrial production process, which is injurious. Nevertheless, the assessment regarding the severity of these components to all creatures is comparatively restricted. This chapter focuses on the sources, complications, and toxicity associated with the presence of micro and nano plastics in the environment along with evidence of trophic transfer, and quantification methods.

Microalgae colonization and trace element accumulation on the plastisphere of marine plastic debris in Monastir Bay (Eastern Tunisia)

In this study, we examined the toxicity potential of the epiplastic microalgal community that developed on low-density polyethylene (LD-PE) plastic debris found in two distinct regions of the Monastir Bay (Tunisia): the coast exposed to anthropogenic discharges and the open sea in front of the Kuriat Islands. Concentrations of potentially toxic elements (PTEs) accumulated in sediments and plastisphere were compared in order to determine their toxicity potential to biological life. The collected plastispheres were predominantly composed of cyanobacteria, chlorophytes, and diatoms. Diatoms display a relatively high diversity (25 species). At all stations, potentially harmful microalgae (PHM) were more abundant in the plastisphere than in seawater and the coastal zone seems to harbour increased number of potentially harmful cyanobacteria within the plastisphere. At the offshore station S1, the PHM community was dominated by the potentially harmful diatoms belonging to the genus Pseudo-nitzschia. Phormidium sp. was the main potentially harmful cyanobacterium identified in the plastisphere of S1. PTEs concentration in the plastisphere was higher than in sediment and ranking with very high contamination factors at all sites according to the sequence Pb > Cu > Cd > Ni > Zn. The highest accumulation of PTEs in the plastisphere was recorded near harbors and industrial zones with important human interference. This work shows that plastisphere can be a threat to vulnerable species not only because it can contain PHM but also because it can accumulate PTEs.

Is there a significant difference in microbiota between water and microplastic surfaces in winter? The possibility of spreading offshore into the ocean

Environmental problems caused by microplastics (MPs) are attracting global attention. The ecological risks of bacteria attached to MPs have not been studied in detail under low temperature conditions. Here, MPs in surface water were sampled in winter from the Changjiang (or Yangtze) River Estuary. The physical and chemical characteristics of the MPs were identified, and the diversity and species composition of bacteria on the surface water MPs were analyzed. Phenotypic prediction analysis was used to analyze the potential risk of bacteria in the biofilm on the surfaces of MPs. The main chemical composition in the MPs in the surface water were PP (polypropylene), PE (polyethylene), PS (polystyrene) and other light weight MPs. Sampling sites played a decisive role in the bacterial species composition. The potential plastic-degrading bacterium Acinetobacter and the potential pathogenic bacterium Pseudomonas showed significant differences across different sampling sites. Microbial communities on the surfaces of MPs in winter were not significantly different from planktonic bacteria in the water body. Phenotypic prediction results showed that bacteria on the surface of MPs had a marked capacity to form biofilms, but a low pathogenicity risk. Based on the results of biodiversity analysis and phenotypic prediction, the potential ecological risk of bacteria in biofilms on MP surfaces is lower at low temperatures. In addition, the numerical simulation results show that the possibility of bacteria attached to MPs from the Changjiang River entering the Pacific Ocean in winter is small. MPs attached bacteria in the Changjiang estuary have low ecological risk to the estuary and the Pacific Ocean in winter.

Spatiotemporal characterisation of microplastics in the coastal regions of Singapore

In the 21st century, plastic production continues to increase at an unprecedented rate, leading to the global issue of plastic pollution. In marine environments, a significant fraction of plastic litter are microplastics, which have a wide range of effects in marine ecosystems. Here, we examine the spatiotemporal distribution of microplastics along the Johor and Singapore Straits, at surface and at depth. Generally, more microplastics were recorded from the surface waters across both Straits. Fragments were the dominant microplastic type (70%), followed by film (25%) and fiber (5%). A total of seven colours of microplastics were identified, with clear microplastics as the most abundant (64.9%), followed by black (25.1%) and blue (5.5%). Microplastics under 500 μm in size accounted for 98.9%, followed by particles 500-1000 μm (1%) and 1-5 mm (0.1%). During the monsoon season, the abundance of microplastics across various sites were observed to be > 1.1 times when compared to the inter-monsoon period. Rainfall was a closely related to the increased microplastic abundance across various sites in the Singapore Strait. This suggests that weather variations during climate change can play critical roles in modulating microplastic availability. Beach sediments facing the Singapore Strait recorded an abundance of 13.1 particles/kg, with polypropylene fragments, polyethylene pellets and thermoplastic polyester foam identified via Fourier transform infrared spectroscopy. Hence, it is crucial to profile the spatiotemporal variation of microplastic abundance in both the surface and in the water column to gain a better understanding of the threat caused by microplastic pollution in the coastal regions of Singapore.

Plastic-microbe interaction in the marine environment: Research methods and opportunities

Approximately 9 million metric tons of plastics enters the ocean annually, and once in the marine environment, plastic surfaces can be quickly colonised by marine microorganisms, forming a biofilm. Studies on plastic debris-biofilm associations, known as plastisphere, have increased exponentially within the last few years. In this review, we first briefly summarise methods and techniques used in exploring plastic-microbe interactions. Then we highlight research gaps and provide future research opportunities for marine plastisphere studies, especially, on plastic characterisation and standardised biodegradation tests, the fate of "environmentally friendly" plastics, and plastisphere of coastal habitats. Located in the tropics, Southeast Asian (SEA) countries are significant contributors to marine plastic debris. However, plastisphere studies in this region are lacking and therefore, we discuss how the unique environmental conditions in the SEA seas may affect plastic-microbe interaction and why there is an imperative need to conduct plastisphere studies in SEA marine environments. Finally, we also highlight the lack of understanding of the pathogenicity and ecotoxicological effects of plastisphere on marine ecosystems.

Diversity and distribution of culturable fouling bacteria in typical mariculture zones in Daya Bay, South China

The diversity and distribution of culturable fouling bacteria in shellfish, fish and non-mariculture zones in Daya Bay were investigated by using a traditional culture-dependent approach combined with an analysis of bacterial 16S rRNA gene sequences. A total of 129 isolates of fouling bacteria belonging to 37 species in 25 genera were collected and identified, which indicated that the three different mariculture zones harbored abundant and diverse fouling bacterial community. At the genus level, Pseudomonas, Arcobacter and Curtobacterium dominated the fouling bacterial community. Moreover, approximately 46% of the 37 representative isolates could form biofilms. After comparing the diversity and distribution of the biofilm-forming bacteria in three different mariculture zones, it was concluded that the ratios of biofilm-forming bacteria in shellfish (68.4%) and fish (63.4%) in mariculture zones were much greater than those in non-mariculture (42.0%) zone. These results provide important information, for the first time, regarding the fouling bacterial community in typical mariculture zones in South China, which will establish a foundation to develop strategies for biofilm control and disease defense.

Selective adsorption of antibiotics on aged microplastics originating from mariculture benefits the colonization of opportunistic pathogenic bacteria

Microplastics and antibiotics widely coexist in the aquatic environment, especially in mariculture regions. However, antibiotics adsorbed on microplastics and their role in the colonization of microorganisms on microplastics are poorly understood. Therefore, in-situ aging experiments were conducted to investigate the impact of antibiotics and microplastics co-occurrence on microorganisms and assess their potential risks to human health. Results showed that antibiotics were adsorbed selectively on microplastics, with 29 investigated antibiotics (n = 40) detected in surrounding water but only 6 investigated antibiotics were adsorbed on microplastics. The concentration of antibiotics accumulated on microplastics was controlled by microplastic types and environmental conditions. For example, aged polypropylene (PP) had more developed pore structures resulting in higher adsorption of antibiotics than other microplastic types. High-throughput sequencing showed higher diversity and distinct composition of microorganisms attached to the microplastics than the surrounding water. Opportunistic pathogenic bacteria such as Mycobacterium possessed positive relationships with tetracycline and doxycycline on aged microplastics, which showed adsorbed antibiotics on aged microplastics could benefit some specific pathogens colonized on the microplastics and spread into unaffected ecosystems, marine organisms even humans. The health risk quotient (HQ) implied the potential human health risk of consuming commercial seafood polluted by antibiotics and microplastic loaded with antibiotics. This study revealed the interaction of antibiotics and microorganisms with aged microplastics in aquaculture systems, providing a novel insight into their synergistic effects on ecological and human health.

Detection of Environmental Microfiber Pollutants through Vibrational Spectroscopic Techniques: Recent Advances of Environmental Monitoring and Future Prospects

A robust environmental monitoring system is highly essential for the instant detection of environmental microfiber pollutants for the sustainable management of the environment and human health. The extent of microfiber pollution is growing exponentially across the globe in both terrestrial and marine environments. An immediate and accurate environmental monitoring system is crucial to investigate the composition and distribution of these micropollutants. Fourier Transform Infrared Spectroscopy and Raman Spectroscopy are vibrational spectroscopic techniques that have the novel ability to detect microfibers within a minute concentration from diverse environmental samples. The major micropollutants which have been analyzed are polyethylene, polypropylene, nylon 6, polystyrene, and polyethylene terephthalate. After a detailed and critical study of the various aspects of spectroscopic analysis, the review is concluded with a comprehensive discussion of the significance of these robust methods and their application in future aspects for further preventing microfiber pollution in the marine environment. This study highlights the utilities and significance of vibrational spectroscopic detection techniques for the immediate and accurate identification of synthetic microfibers. This review also evaluated the implementation of spectroscopic methods as a precise tool for the characterization and monitoring of microfiber pollutants in the environment.

Time-series incubations in a coastal environment illuminates the importance of early colonizers and the complexity of bacterial biofilm dynamics on marine plastics

The problematic of microplastics pollution in the marine environment is tightly linked to their colonization by a wide diversity of microorganisms, the so-called plastisphere. The composition of the plastisphere relies on a complex combination of multiple factors including the surrounding environment, the time of incubation along with the polymer type, making it difficult to understand how the biofilm evolves during the microplastic lifetime over the oceans. To better define bacterial community assembly processes on plastics, we performed a 5 months spatio-temporal survey of the plastisphere in an oyster farming area in the Bay of Brest (France). We deployed three types of plastic pellets in two positions in the foreshore and in the water column. Plastic-associated biofilm composition in all these conditions was monitored using 16 S rRNA metabarcoding and compared to free-living and attached bacterial members of seawater. We observed that bacterial families associated to plastic pellets were significantly distinct from the ones found in seawater, with a significant prevalence of filamentous Cyanobacteria on plastics. No convergence towards a unique plastisphere was detected between polymers exposed in the intertidal and subtidal area, emphasizing the central role of the surrounding environment on constantly shaping the plastisphere community diversity. However, we could define a bulk of early-colonizers of marine biofilms such as Alteromonas, Pseudoalteromonas or Vibrio. These early-colonizers could reach high abundances in floating microplastics collected in field-sampling studies, suggesting the plastic-associated biofilms could remain at early development stages across large oceanic scales. Our study raises the hypothesis that most members of the plastisphere, including putative pathogens, could result of opportunistic colonization processes and unlikely long-term transport.

Plastisphere on microplastics: In situ assays in an estuarine environment

In this study, the influence of the plastisphere on metals accumulation and weathering processes of polystyrene (PSMPs) and nylon microplastics (NyMPs) in polluted waters during a 129 day-assay were studied. MPs were characterized through scanning electron microscopy (SEM) with Energy dispersive X-ray (EDX), X-ray diffraction (XRD), attenuated total reflectance Fourier transformed infrared (ATR-FTIR) spectroscopy, contact angle, and thermogravimetric analysis (TGA). Also Cr, Mn, Zn, Cd, Pb, and Cu in the plastisphere on MPs were analyzed during the assay. Potentially pathogenic Vibrio, Escherichia coli, and Pseudomonas spp. were abundant in both MPs. Ascomycota fungi (Phona s.l., Alternaria sp., Penicillium sp., and Cladosporium sp.), and yeast, were also identified. NyMPs and PSMPs exhibited a decrease in the contact angle and increased their weights. SEM/EDX showed weathering signs, like surface cracks and pits, and leaching TiO₂ pigments from NyMPs after 42 days. XRD displayed a notorious decrease in NyMPs crystallinity, which could alter its interaction with external contaminants. Heavy metal accumulation on the plastisphere formed on each type of MPs increased over the exposure time. After 129 days of immersion, metals concentrations in the plastisphere on MPs were in the following order Cr ˃ Mn ˃ Zn ˃ Cu ˃ Pb ˃ Cd, demonstrating how the biofilm facilitates metal mobilization. The results of this study lead to a better understanding of the impact of marine plastic debris as vectors of pathogens and heavy metals in coastal environments.

Trojan horse in the intestine: A review on the biotoxicity of microplastics combined environmental contaminants

With the reported ability of microplastics (MPs) to act as "Trojan horses" carrying other environmental contaminants, the focus of researches has shifted from their ubiquitous occurrence to interactive toxicity. In this review, we provided the latest knowledge on the processes and mechanisms of interaction between MPs and co-contaminants (heavy metals, persistent organic pollutants, pathogens, nanomaterials and other contaminants) and discussed the influencing factors (environmental conditions and characteristics of polymer and contaminants) that affect the adsorption/desorption process. In addition, the bio-toxicological outcomes of mixtures are elaborated based on the damaging effects on the intestinal barrier. Our review showed that the interaction processes and toxicological outcomes of mixture are complex and variable, and the intestinal barrier should receive more attention as the first line of defensing against MPs and environmental contaminants invasion. Moreover, we pointed out several knowledge gaps in this new research area and suggested directions for future studies in order to understand the multiple factors involved, such as epidemiological assessment, nanoplastics, mechanisms for toxic alteration and the fate of mixtures after desorption.

Priorities to inform research on marine plastic pollution in Southeast Asia

Southeast Asia is considered to have some of the highest levels of marine plastic pollution in the world. It is therefore vitally important to increase our understanding of the impacts and risks of plastic pollution to marine ecosystems and the essential services they provide to support the development of mitigation measures in the region. An interdisciplinary, international network of experts (Australia, Indonesia, Ireland, Malaysia, the Philippines, Singapore, Thailand, the United Kingdom, and Vietnam) set a research agenda for marine plastic pollution in the region, synthesizing current knowledge and highlighting areas for further research in Southeast Asia. Using an inductive method, 21 research questions emerged under five non-predefined key themes, grouping them according to which: (1) characterise marine plastic pollution in Southeast Asia; (2) explore its movement and fate across the region; (3) describe the biological and chemical modifications marine plastic pollution undergoes; (4) detail its environmental, social, and economic impacts; and, finally, (5) target regional policies and possible solutions. Questions relating to these research priority areas highlight the importance of better understanding the fate of marine plastic pollution, its degradation, and the impacts and risks it can generate across communities and different ecosystem services. Knowledge of these aspects will help support actions which currently suffer from transboundary problems, lack of responsibility, and inaction to tackle the issue from its point source in the region. Being profoundly affected by marine plastic pollution, Southeast Asian countries provide an opportunity to test the effectiveness of innovative and socially inclusive changes in marine plastic governance, as well as both high and low-tech solutions, which can offer insights and actionable models to the rest of the world.

Effects of emerging contaminants and heavy metals on variation in bacterial communities in estuarine sediments

Emerging contaminants (ECs) and heavy metals (HMs) are universally present together in estuarine sediments; despite this, their effects on microbial communities have been widely studied separately, rather than in consort. In this study, the combined effects of ECs and HMs on microbial communities were investigated in sediments from 11 major river estuaries around the Bohai Sea, China. Proteobacteria, Bacteroidetes, and Firmicutes were the dominant phyla in the sediments. Using Shannon indices, total phosphorus and total organic carbon were shown to affect microbial community structure. Redundancy analysis of microbial variation implicated Cd and As as the greatest pollutants, followed by Mn, Fe, Zn and Cu; no impacts from galaxolide (HHCB) and tonalide (AHTN) were found. Correlation analysis demonstrated that the concentration of ECs increased the abundance of certain bacteria (e.g., Haliangium, Altererythrobacter, Gaiella and Erythrobacter), and therefore these can be used as potential contamination indicators. Shannon indices and Chao1 indices showed that there were differences in the richness and diversity of bacterial communities in the sediments of 11 rivers. The principal coordinate analysis displayed higher similarity of bacterial community composition in estuarine sediments in Liaoning province than other regions. The results can be used to predict changes in estuary ecosystems to maintain their ecological balance and health.

Enrichment and dissemination of bacterial pathogens by microplastics in the aquatic environment

Microplastic pollution and associated impacts in the aquatic environment are spreading at an alarming rate worldwide. Plastic waste is increasing in the environment, and microplastics (MPs) are becoming a growing issue because they serve as vectors for pathogen transmission. This is the first comprehensive review that specifically addresses MPs as a source and vector of pathogenic bacteria, mainly associated with genera Vibrio, Pseudomonas, Acinetobacter, and so on, which are discovered to be more abundant on the aquatic plastisphere than that in the surrounding wastewater, freshwater, and marine water ecosystems. The horizontal gene transfer, chemotaxis, and co-selection and cross-selection could be the potential mechanism involved in the enrichment and dissemination of bacterial pathogens through the aquatic plastisphere. Further, bacterial pathogens through aquatic plastisphere can cause various ecological and human health impacts such as disrupted food chain, oxidative stress, tissue damages, disease transmission, microbial dysbiosis, metabolic disorders, among others. Last but not least, future research directions are also described to find answers to the challenging questions about bacterial pathogens in the aquatic plastisphere to ensure the integrity and safety of ecological and human health.

The Occurrence of Microplastics and the Formation of Biofilms by Pathogenic and Opportunistic Bacteria as Threats in Aquaculture

Aquaculture is the most rapidly growing branch of animal production. The efficiency and quality of the produced food depends on sustainable management, water quality, feed prices and the incidence of diseases. Micro- (MP < 5 mm) and nanoplastic (NP < 1000 nm) particles are among the current factors causing serious water pollution. This substance comes solely from products manufactured by humans. MP particles migrate from the terrestrial to the aquatic environment and adversely affect, especially, the health of animals and humans by being a favorable habitat and vector for microbial pathogens and opportunists. More than 30 taxa of pathogens of humans, aquacutural animals and plants, along with opportunistic bacteria, have been detected in plastic-covering biofilm to date. The mobility and durability of the substance, combined with the relatively closed conditions in aquacultural habitats and pathogens’ affinity to the material, make plastic particles a microbiological medium threatening the industry of aquaculture. For this reason, in addition to the fact of plastic accumulation in living organisms, urgent measures should be taken to reduce its influx into the environment. The phenomenon and its implications are related to the concept of one health, wherein the environment, animals and humans affect each other’s fitness.

Plastisphere community assemblage of aquatic environment: plastic-microbe interaction, role in degradation and characterization technologies

It is undeniable that plastics are ubiquitous and a threat to global ecosystems. Plastic waste is transformed into microplastics (MPs) through physical and chemical disruption processes within the aquatic environment. MPs are detected in almost every environment due to their worldwide transportability through ocean currents or wind, which allows them to reach even the most remote regions of our planet. MPs colonized by biofilm-forming microbial communities are known as the ''plastisphere". The revelation that this unique substrate can aid microbial dispersal has piqued interest in the ground of microbial ecology. MPs have synergetic effects on the development, transportation, persistence, and ecology of microorganisms. This review summarizes the studies of plastisphere in recent years and the microbial community assemblage (viz. autotrophs, heterotrophs, predators, and pathogens). We also discussed plastic-microbe interactions and the potential sources of plastic degrading microorganisms. Finally, it also focuses on current technologies used to characterize those microbial inhabitants and recommendations for further research.

Can microplastics facilitate the emergence of infectious diseases?

Plastic pollution is a major environmental problem. Small plastic particles (called microplastics) have been reported to have pernicious effects on human and wildlife health, by altering physiological functions (e.g., immunity, metabolism) and interfering with commensal microorganisms. However, in addition to these direct toxic effects, we suggest that microplastic pollution might also exert deleterious effects, modifying (i) the exposure to pathogens (e.g., multi-drug resistant bacteria) and (ii) the dynamics of vector-borne diseases. Therefore, we argue that microplastics should be considered as a ubiquitous environmental hazard, potentially promoting the (re)emergence of infectious diseases. The implementation of multi- and interdisciplinary research projects are crucial to properly evaluate if microplastic pollution should be added to the current list of global health threats.

Exposure of Goniopora columna to polyethylene microplastics (PE-MPs): Effects of PE-MP concentration on extracellular polymeric substances and microbial community

Although the pollution of coral reefs by microplastics (MPs) is an environmental problem of global significance, the effects of MP concentration on scleractinian corals remain largely underexplored. Herein, we exposed a representative scleractinian coral (Goniopora columna) to different concentrations (5-300 mg L^-1) of polyethylene microplastics (PE-MPs; 40-48 μm) over seven days and evaluated the changes in microbial community and extracellular polymeric substances (EPS) using fluorescence excitation-emission matrix spectroscopy and amplicon sequence variants (ASV). At a PE-MP concentration of 300 mg L^-1, the relative abundance of Bacillus (Firmicutes phylum) and Ruegeria (Proteobacteria phylum) in PE-MP-associated EPS increased and decreased, respectively, while the effects of exposure depended on the particle size of the extracellular polymeric substance (EPS)-based matrix and the humification index. Humic- and fulvic-like substances were identified as critical EPS components produced by microbial activity. The results have shed new insights into short-term responses of G. columna during exposure to different PE-MP concentrations and reveal important coral-MP-microbiome interactions in coral reef ecosystems. Results demonstrated that the coral-MPs interactions should be further evaluated to gain a deeper understanding of the underlying ecotoxicological risks.

The presence of polystyrene nanoplastics enhances the MCLR uptake in zebrafish leading to the exacerbation of oxidative liver damage

The accumulation of diminutive plastic waste in the environment, including microplastics and nanoplastics, has threatened the health of multiple species. Nanoplastics can adsorb the pollutants from the immediate environment, and may be used as carriers for pollutants to enter organisms and bring serious ecological risk. To evaluate the toxic effects of microcystin-LR (MCLR) on the liver of adult zebrafish (Danio rerio) in the presence of 70 nm polystyrene nanoplastics (PSNPs), zebrafish were exposed to MCLR alone (0, 0.9, 4.5 and 22.5 μg/L) and a mixture of MCLR + PSNPs (100 μg/L) for three months. The results indicated that groups with combined exposure to MCLR and PSNPs further enhanced the accumulation of MCLR in the liver when compared to groups only exposed to MCLR. Cellular swelling, fat vacuolation, and cytoarchitectonic damage were observed in zebrafish livers after exposure to MCLR, and the presence of PSNPs exacerbated these adverse effects. The results of biochemical tests showed the combined effect of MCLR + PSNPs enhanced MCLR-induced hepatotoxicity, which could be attributed to the altered levels of reactive oxygen species, malondialdehyde and glutathione, and activities of catalase. The expression of genes related to antioxidant responses (p38a, p38b, ERK2, ERK3, Nrf2, HO-1, cat1, sod1, gax, JINK1, and gstr1) was further performed to study the mechanisms of MCLR combined with PSNPs aggravated oxidative stress of zebrafish. The results showed that PSNPs could improve the bioavailability of MCLR in the zebrafish liver by acting as a carrier and accelerate MCLR-induced oxidative stress by regulating the levels of corresponding enzymes and genes.

Microplastics and Their Impact on Reproduction-Can we Learn From the C. elegans Model?

Biologically active environmental pollutants have significant impact on ecosystems, wildlife, and human health. Microplastic (MP) and nanoplastic (NP) particles are pollutants that are present in the terrestrial and aquatic ecosystems at virtually every level of the food chain. Moreover, recently, airborne microplastic particles have been shown to reach and potentially damage respiratory systems. Microplastics and nanoplastics have been shown to cause increased oxidative stress, inflammation, altered metabolism leading to cellular damage, which ultimately affects tissue and organismal homeostasis in numerous animal species and human cells. However, the full impact of these plastic particles on living organisms is not completely understood. The ability of MPs/NPs to carry contaminants, toxic chemicals, pesticides, and bioactive compounds, such as endocrine disrupting chemicals, present an additional risk to animal and human health. This review will discusses the current knowledge on pathways by which microplastic and nanoplastic particles impact reproduction and reproductive behaviors from the level of the whole organism down to plastics-induced cellular defects, while also identifying gaps in current knowledge regarding mechanisms of action. Furthermore, we suggest that the nematode Caenorhabditis elegans provides an advantageous high-throughput model system for determining the effect of plastic particles on animal reproduction, using reproductive behavioral end points and cellular readouts.

Plastic Debris As a Vector for Bacterial Disease: An Interdisciplinary Systematic Review

Pathogens and polymers can separately cause disease; however, environmental and medical researchers are increasingly investigating the capacity of polymers to transfer pathogenic bacteria, and cause disease, to hosts in new environments. We integrated causal frameworks from ecology and epidemiology into one interdisciplinary framework with four stages (colonization, survival, transfer, disease). We then systematically and critically reviewed 111 environmental and medical papers. We show 58% of studies investigated the colonization-stage alone but used this as evidence to classify a substratum as a vector. Only 11% of studies identified potential pathogens, with only 3% of studies confirming the presence of virulence-genes. Further, 8% of studies investigated μm-sized polymers with most (58%) examining less pervasive cm-sized polymers. No study showed bacteria can preferentially colonize, survive, transfer, and cause more disease on polymers compared to other environmental media. One laboratory experiment demonstrated plausibility for polymers to be colonized by a potential pathogen (Escherichia coli), survive, transfer, and cause disease in coral (Astrangia poculata). Our analysis shows a need for linked structured surveys with environmentally relevant experiments to understand patterns and processes across the vectoral stages, so that the risks and impacts of pathogens on polymers can be assessed with more certainty.

Quantifying the importance of plastic pollution for the dissemination of human pathogens: The challenges of choosing an appropriate 'control' material

Discarded plastic wastes in the environment are serious challenges for sustainable waste management and for the delivery of environmental and public health. Plastics in the environment become rapidly colonised by microbial biofilm, and importantly this so-called 'plastisphere' can also support, or even enrich human pathogens. The plastisphere provides a protective environment and could facilitate the increased survival, transport and dissemination of human pathogens and thus increase the likelihood of pathogens coming into contact with humans, e.g., through direct exposure at beaches or bathing waters. However, much of our understanding about the relative risks associated with human pathogens colonising environmental plastic pollution has been inferred from taxonomic identification of pathogens in the plastisphere, or laboratory experiments on the relative behaviour of plastics colonised by human pathogens. There is, therefore, a pressing need to understand whether plastics play a greater role in promoting the survival and dispersal of human pathogens within the environment compared to other substrates (either natural materials or other pollutants). In this paper, we consider all published studies that have detected human pathogenic bacteria on the surfaces of environmental plastic pollution and critically discuss the challenges of selecting an appropriate control material for plastisphere experiments. Whilst it is clear there is no 'perfect' control material for all plastisphere studies, understanding the context-specific role plastics play compared to other substrates for transferring human pathogens through the environment is important for quantifying the potential risk that colonised plastic pollution may have for environmental and public health.

Sophistication in a seemingly simple creature: a review of wild holothurian nutrition in marine ecosystems

Holothurians are marine invertebrates that are among the most widespread benthic megafauna communities by both biomass and abundance in shallow-water and deep-sea ecosystems, their functions supporting important ecological services worldwide. Despite their simple appearance as sea cucumbers, holothurians show a wide range of feeding practices. However, information on what and how these animals eat is scattered and potentially confusing. We provide a comprehensive review of holothurian nutrition in coastal and deep-sea ecosystems. First, we describe morphological aspects of holothurian feeding and the ultrastructure of tentacles. We discuss the two processes for food capture, concluding that mucus adhesion is likely the main method; two mucous cells, type-1 and type-2, possibly allow the adhesion and de-adhesion, respectively, of food particles. Secondly, this review aims to clarify behavioural aspects of holothurian suspension- and deposit-feeding. We discuss the daily feeding cycle, and selective feeding strategies. We conclude that there is selectivity for fine and organically rich particles, and that feeding through the cloaca is also a route for nutrient absorption. Third, we provide a wide description of the diet of holothurians, which can be split into two categories: living and non-living material. We suggest that Synallactida, Molpadida, Persiculida, Holothuriida and Elasipodida, ingest the same fractions, and emphasise the importance of bacteria in the diet of holothurians.

Impact of aquatic microplastics and nanoplastics pollution on ecological systems and sustainable remediation strategies of biodegradation and photodegradation

The extreme degree of microplastics contamination and its negative impact on ecosystems has become a serious and emerging global concern. Microplastics are mainly generated from products that are used primarily in our everyday lives and are also generated from the fragmentation of larger plastic wastes. It easily penetrates the food chain and, when ingested by aquatic animals or humans, can pose serious health problems. Recently, several technologies have been developed to control the unrestricted spread of microplastics and possibly eradicate them; however, still under investigation. In this review, we have illustrated the types of microplastics, their harmful effect on living things, and the progress to degrade them to protect the environment and life on earth. Several promising and eco-friendly technologies including microbial and enzymatic approaches are enticing to eliminate the microplastics. Also, the photodegradation of microplastics contaminations appeals as a more fascinating approach. The metal oxide-assisted photodegradation of microplastics has also been taken into account. This work presented an impact on the comprehensive research for the effective degradation of different microplastic compositions as well as emerging green approaches for a sustainable environment and a healthier life.

The structure and assembly mechanisms of plastisphere microbial community in natural marine environment

The microbial colonization profiles on microplastics (MPs) in marine environments have recently sparked global interest. However, many studies have characterized plastisphere microbiomes without considering the ecological processes that underly microbiome assembly. Here, we carried out a three-timepoint exposure experiment at 1-, 4-, and 8-week and investigated the colonization dynamics for polyethylene, polypropylene, polystyrene, polyvinyl chloride, and acrylonitrile-butadiene-styrene MP pellets in natural coastal water. Using high-throughput sequencing of 16S rRNA, we found diversity and evenness were higher (p < 0.05) in the plastisphere communities than those in seawater, and microorganisms colonizing were co-influenced by environmental factors, polymer types, and exposure duration. Functional potential and co-occurrence network analysis revealed that MP exposure enriched the xenobiotic biodegradation potential and reduced the complexity of the MP microbial network. Simultaneously, null-model analyses indicated that stochastic processes contributed a bigger role than deterministic processes in shaping plastisphere microbial community structure with dispersal limitations contributing to a greater extent to microbial succession trajectories. These results implied the plastic surface had a more important role as a raft onto which microbes attach rather than selectively recruiting plastic-specific microbial colonizers. Our work strengthened the understanding of the ecological mechanisms by which microbial community patterns are controlled during colonization by plastic-associated microbes.

Environmental Impacts of Personal Protective Clothing Used to Combat COVID- 19

Personal protective clothing is critical to shield users from highly infectious diseases including COVID-19. Such clothing is predominantly single-use, made of plastic-based synthetic fibers such as polypropylene and polyester, low cost and able to provide protection against pathogens. However, the environmental impacts of synthetic fiber-based clothing are significant and well-documented. Despite growing environmental concerns with single-use plastic-based protective clothing, the recent COVID-19 pandemic has seen a significant increase in their use, which could result in a further surge of oceanic plastic pollution, adding to the mass of plastic waste that already threatens marine life. In this review, the nature of the raw materials involved in the production of such clothing, as well as manufacturing techniques and the personal protective equipment supply chain are briefly discussed. The environmental impacts at critical points in the protective clothing value chain are identified from production to consumption, focusing on water use, chemical pollution, CO2 emissions, and waste. On the basis of these environmental impacts, the need for fundamental changes in the business model is outlined, including increased usage of reusable protective clothing, addressing supply chain "bottlenecks", establishing better waste management, and the use of sustainable materials and processes without associated environmental problems.