High-efficiency solar evaporator prepared by one-step carbon nanotubes loading on cotton fabric toward water purification

Hierarchical Ti3C2/BiVO4 microcapsules for enhanced solar-driven water evaporation and photocatalytic H2 evolution

Desalination processes frequently require a lot of energy to generate freshwater and energy, which depletes resources. Their reliance on each other creates tension between these two vital resources. Herein, hierarchical MXene nanosheets and bismuth vanadate (Ti3C2/BiVO4)-derived microcapsules were synthesized for a photothermal-induced photoredox reaction for twofold applications, namely, solar-driven water evaporation and hydrogen (H2) production. For this purpose, flexible aerogels were fabricated by introducing Ti3C2/BiVO4 microcapsules in the polymeric network of natural rubber latex (NRL-Ti3C2/BiVO4), and a high evaporation rate of 2.01 kg m-2 h-1 was achieved under 1-kW m-2 solar intensity. The excellent performance is attributed to the presence of Ti3C2/BiVO4 microcapsules in the polymeric network, which provides balanced hydrophilicity and broadband sun absorption (96 %) and is aimed at plasmonic heating with microscale thermal confinement tailored by heat transfer simulations. Notably, localized plasmonic heating at the catalyst active sites of the Ti3C2/BiVO4 heterostructure promotes enhanced photocatalytic H2 production evolved after 4 h of reaction is 9.39 μmol, which is highly efficient than pure BiVO4 and Ti3C2. This method turns the issue of water-fuel crisis into a collaborative connection, presenting avenues to collectively address the anticipated demand rather than fostering competition.

High-Efficiency Photothermal Water Evaporation under Low-Intensity Sunlight Using Wood Biochar Monolith

Utilizing energy directly from the sun, solar water evaporation drives the global hydrological cycle and produces freshwater from saline water in the oceans and on land. As water is a poor solar absorber, a photothermal material is needed to facilitate the conversion of photons to thermal energy and increase the efficiency of solar desalination. However, the current photothermal materials are less efficient and expensive to be manufactured. Inspired by nature, we created a new photothermal material called a wood biochar monolith (WBM) by carbonizing wood using the pyrolysis process at 1000 °C and subsequently steaming at high pressure. Under low light intensity (193 W/m2), the light to vapor efficiency of maple WBM is more than 100%. The outstanding performance of WBM is attributed to (1) the facilitated water transport in the hierarchical, open-pore network preserved from the wood precursor in WBM and (2) the reduced evaporation enthalpy of confined water in WBM and the high broadband sunlight absorptivity of WBM. Moreover, the high evaporation rate causes the temperature of WBM to be lower than that of the surrounding water, enabling thermal energy harvesting by WBM from water and making a light-to-vapor efficiency of >100% feasible. This discovery offers opportunities for developing low-cost, high-performance water desalination or humidification devices deployable in remote areas with nonconcentrated natural sunlight.

A critical review of sodium alginate-based composites in water treatment

The global freshwater crisis is a pressing issue, especially in areas with little rainfall and inner continental regions. The growing attention to water scarcity has induced increased interest in research on advanced water treatment technologies. As an abundant bioactive material in nature, sodium alginate (SA) has been widely used in water management due to its outstanding water absorption and holding ability, reversible swelling property, and pollutant adsorption performance. Building on this, progress made in using various modified forms of SA to access clean water is addressed in this review. Covering studies concern the adsorption and separation of pollutants in wastewater by SA-based absorbents and freshwater harvesting by SA-based collectors. This review explores SA-based composites' composition-structure-construction designs and emphasizes the impact of materials like inorganic materials, functional polymers, and porous matrices and how they can be exploited for water treatment. It also highlights the mechanisms of contaminants adsorption and freshwater desorption of SA-based composites. Finally, the shortcomings and future orientation of SA-based composites are proposed, including performance optimization, structural modification, application expansion, and mechanism in-depth investigation. This review aims to offer a theoretical basis and technical guidance for the use of natural materials to respond to the shortage of freshwater resources.

Polyhedral Oligomeric Sesquioxane Cross-Linked Chitosan-Based Multi-Effective Aerogel Preparation and Its Water-Driven Recovery Mechanism

The use of environmentally friendly and non-toxic biomass-based interfacial solar water evaporators has been widely reported as a method for water purification in recent years. However, the poor stability of the water transport layer made from biomass materials and its susceptibility to deformation when exposed to harsh environments limit its practical application. To address this issue, water-driven recovery aerogel (PCS) was prepared by cross-linking epoxy-based polyhedral oligomeric silsesquioxane (EP-POSS) epoxy groups with chitosan (CS) amino groups. The results demonstrate that PCS exhibits excellent water-driven recovery performance, regaining its original volume within a very short time (1.9 s) after strong compression (ε > 80%). Moreover, PCS has a water absorption rate of 2.67 mm s-1 and exhibits an excellent water absorption capacity of 22.09 g g-1 even after ten cycles of absorption-removal. Furthermore, a photothermal evaporator (PCH) was prepared by loading the top layer with hydrothermally reacted tannins (HAs) and Zn2+ complexes. The results indicate that PCH achieves an impressive evaporation rate of 1.89 kg m-2 h-1 under one sun illumination. Additionally, due to the antimicrobial properties of Zn2+, PCH shows inhibitory effects against Staphylococcus aureus and Escherichia coli, thereby extending the application of solar water evaporators to include antimicrobial purification in natural waters.

Review on design strategies and applications of flexible cellulose‑carbon nanotube functional composites

Combining the excellent biocompatibility and mechanical flexibility of cellulose with the outstanding electrical, mechanical, optical and stability properties of carbon nanotubes (CNTs), cellulose-CNT composites have been extensively studied and applied to many flexible functional materials. In this review, we present advances in structural design strategies and various applications of cellulose-CNT composites. Firstly, the structural characteristics and corresponding treatments of cellulose and CNTs are analyzed, as are the potential interactions between the two to facilitate the formation of cellulose-CNT composites. Then, the design strategies and processing techniques of cellulose-CNT composites are discussed from the perspectives of cellulose fibers at the macroscopic scale (natural cotton, hemp, and other fibers; recycled cellulose fibers); nanocellulose at the micron scale (nanofibers, nanocrystals, etc.); and macromolecular chains at the molecular scale (cellulose solutions). Further, the applications of cellulose-CNT composites in various fields, such as flexible energy harvesting and storage devices, strain and humidity sensors, electrothermal devices, magnetic shielding, and photothermal conversion, are introduced. This review will help readers understand the design strategies of cellulose-CNT composites and develop potential high-performance applications.

Superior Removal of Vanadium(V) from Simulated Groundwater with a Fe-Based Metal-Organic Framework Immobilized on Cotton Fibers

A suitable adsorbent is essential in the process of removing hazardous vanadium(V) from actual groundwater. In this work, MIL-88A(Fe)/cotton (MC) was employed to eliminate V(V) from simulated vanadium-contaminated groundwater. The findings demonstrated that MC exhibited an exceptional performance in removing V(V), displaying a maximum adsorption capacity of 218.71 mg g-1. MC exhibits great promise as an adsorbent for V(V) elimination in an extensive pH range spanning 3 to 11. Even in the presence of high levels of competing ions such as Cl-, NO3-, and SO42-, MC demonstrated remarkable specificity in adsorbing V(V). The results of column experiments and co-occurring ions influence tests indicate that MC is a potential candidate for effectively treating actual vanadium-contaminated groundwater. The effluent could meet the vanadium content restriction of 50 μg L-1 required in China's drinking water sources. Regeneration of MC can be performed easily without experiencing significant capacity loss. The results obtained from this research indicate the promising potential of MC in mitigating vanadium pollution.

2D MXenes Embedded Perovskite Hydrogels for Efficient and Stable Solar Evaporation

Solar evaporation is a facile and promising technology to efficiently utilize renewable energy for freshwater production and seawater desalination. Here, the fabrication of self-regenerating hydrogel composed of 2D-MXenes nanosheets embedded in perovskite La 0.6Sr 0.4Co 0.2Fe 0.8O3- δ (LSCF)/polyvinyl alcohol hydrogels for efficient solar-driven evaporation and seawater desalination is reported. The mixed dimensional LSCF/Ti3C2 composite features a localized surface plasmonic resonance effect in the polymeric network of polyvinyl alcohol endows excellent evaporation rates (1.98 kg m-2 h-1) under 1 k Wm-2 or one sun solar irradiation ascribed by hydrophilicity and broadband solar absorption (96%). Furthermore, the long-term performance reveals smooth mass change (13.33 kg m-2) during 8 h under one sun. The composite hydrogel prompts the dilution of concentrated brines and redissolves it back to water (1.2 g NaCl/270 min) without impeding the evaporation rate without any salt-accumulation. The present research offers a substantial opportunity for solar-driven evaporation without any salt accumulation in real-life applications.

Green Nanomaterials for Smart Textiles Dedicated to Environmental and Biomedical Applications

Smart textiles recently reaped significant attention owing to their potential applications in various fields, such as environmental and biomedical monitoring. Integrating green nanomaterials into smart textiles can enhance their functionality and sustainability. This review will outline recent advancements in smart textiles incorporating green nanomaterials for environmental and biomedical applications. The article highlights green nanomaterials' synthesis, characterization, and applications in smart textile development. We discuss the challenges and limitations of using green nanomaterials in smart textiles and future perspectives for developing environmentally friendly and biocompatible smart textiles.

Biomass-Printed Hybrid Solar Evaporator Derived from Bio-polluted Invasive Species, a Potential Step toward Carbon Neutrality

Biomass-based photothermal conversion is of great importance for solar energy utilization toward carbon neutrality. Herein, a hybrid solar evaporator is innovatively designed via UV-induced printing of pyrolyzed Kudzu biochar on hydrophilic cotton fabric (KB@CF) to integrate all parameters in a single evaporator, such as solar evaporation, salt collection, waste heat recovery for thermoelectricity, sieving oil emulsions, and water disinfection from microorganisms. The UV-induced printed fabric demonstrates stronger material adhesion as compared to the conventional dip-dry technique. The hybrid solar evaporator gives an enhanced evaporation rate (2.32 kg/m² h), and the complementary waste heat recovery system generates maximum open-circuit voltage (V_out ∼ 143.9 mV) and solar to vapor conversion efficiency (92%), excluding heat losses under one sun illumination. More importantly, 99.98% of photothermal-induced bacterial killing efficiency was achieved within 20 min under 1 kW m^-2 using the hyperthermia effect of Kudzu biochar. Furthermore, numerical heat-transfer simulations were performed successfully to analyze the enhanced interfacial heat accumulation (75.3 °C) and heat flux distribution of the thermoelectric generators under one sun. We firmly believe that the safe use of bio-polluted invasive species in hybrid solar-driven evaporation systems eases the environmental pressure toward carbon neutrality.

Facile Synthesis of Vertically Arranged CNTs for Efficient Solar-Driven Interfacial Water Evaporation

Solar-driven evaporation of water is a sustainable and promising technology for addressing the crisis of clean water. Herein, novel vertically arranged carbon nanotube (V-CNT) aerogels with a tree branch structure is facilely synthesized through an ice templating method. The V-CNT-based photothermal evaporator exhibits efficient broadband light trapping and super-hydrophilicity. Owing to the unique structure and ultrafast water transportation, a high evaporation rate of 3.26 kg m-2 h-1 was achieved by the three-dimensional V-CNT-based evaporator under a solar illumination of 1 kW m-2. More significantly, the V-CNT shows excellent recycling stability and salt-resistant performance in seawater and may provide a novel strategy to the practical sustainable technique of water purification applications.

High-Performance Solar Steam Generator Using Low-Cost Biomass Waste Photothermal Material and Engineering of the Structure

In this work, high-performance, low-cost, environmentally friendly multilayered solar steam generation systems are fabricated by engineering the structure and using a biomass photothermal material. Remarkably, the biomass photothermal material is extracted from the pyrolysis waste of linseed (flax) grains. The introduced system desalinates water using solar energy as the renewable source of energy, and its light absorber is from the waste of a renewable source. The biomass waste powder possesses a mesoporous structure, providing high light absorption through photon scattering and its high surface area. Moreover, to harvest the incident light efficiently and manage the thermal energy generated, devices including light absorbers with cone and cubic configurations and different water manager layers are fabricated and compared to each other. To confirm the high performance of the introduced photothermal material, different systems comprising graphite, graphene oxide, and carbon nanotube light absorbers are also fabricated. Using a biomass light absorber combined with harvesting of the light in different directions (cone configuration), the system with a water evaporation rate of 1.59 kg/m2h corresponding to an efficiency of 92.9% is achieved. Furthermore, by depositing a thin layer of the transparent thermal superinsulator silica aerogel on the light absorber layer, the generated heat is localized and the heat losses are prevented, leading to a 7.5% enhancement of the water evaporation rate of the biomass system. The eco-friendly biomass-based system shows no significant change in its performance through operation for 40 desalination cycles of Persian Gulf water.

Nature Inspired MXene-Decorated 3D Honeycomb-Fabric Architectures Toward Efficient Water Desalination and Salt Harvesting

The 3D honeycomb-like fabric decorated with MXene is woven as solar evaporator. The honeycomb structure enables light-trapping and recycling of convective and radiative heat. The 3D honeycomb-fabric evaporator possesses high solar efficiency up to 93.5% under 1 sun irradiation and excellent salt harvesting ability.

ABSTRACT

Solar steam generation technology has emerged as a promising approach for seawater desalination, wastewater purification, etc. However, simultaneously achieving superior light absorption, thermal management, and salt harvesting in an evaporator remains challenging. Here, inspired by nature, a 3D honeycomb-like fabric decorated with hydrophilic Ti₃C₂T_x (MXene) is innovatively designed and successfully woven as solar evaporator. The honeycomb structure with periodically concave arrays creates the maximum level of light-trapping by multiple scattering and omnidirectional light absorption, synergistically cooperating with light absorbance of MXene. The minimum thermal loss is available by constructing the localized photothermal generation, contributed by a thermal-insulating barrier connected with 1D water path, and the concave structure of efficiently recycling convective and radiative heat loss. The evaporator demonstrates high solar efficiency of up to 93.5% and evaporation rate of 1.62 kg m⁻² h⁻¹ under one sun irradiation. Moreover, assisted by a 1D water path in the center, the salt solution transporting in the evaporator generates a radial concentration gradient from the center to the edge so that the salt is crystallized at the edge even in 21% brine, enabling the complete separation of water/solute and efficient salt harvesting. This research provides a large-scale manufacturing route of high-performance solar steam generator. [Image: see text]

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s40820-021-00748-7.

High-Entropy-Alloy Nanoparticles with Enhanced Interband Transitions for Efficient Photothermal Conversion

Photothermal materials with broadband optical absorption and high conversion efficiency are intensively pursued to date. Here, proposing by the d-d interband transitions, we report an unprecedented high-entropy alloy FeCoNiTiVCrCu nanoparticles that the energy regions below and above the Fermi level (±4 eV) have been fully filled by the 3d transition metals, which realizes an average absorbance greater than 96 % in the entire solar spectrum (wavelength of 250 to 2500 nm). Furthermore, we also calculated the photothermal conversion efficiency and the evaporation rate towards the steam generation. Due to its pronounced full light capture and ultrafast local heating, our high-entropy-alloy nanoparticle-based solar steam generator has over 98 % efficiency under one sun irradiation, meanwhile enabling a high evaporation rate of 2.26 kg m^-2  h^-1 .

Rational Design of a High Performance and Robust Solar Evaporator via 3D-Printing Technology

Utilizing the broad-band solar spectrum for sea water desalination is a promising method that can provide fresh water without sophisticated infrastructures. However, the solar-to-vapour efficiency has been limited due to the lack of a proper design for the evaporator to deal with either a large amount of heat loss or salt accumulation. Here, these issues are addressed via two cost-effective approaches: I) a rational design of a concave shaped supporter by 3D-printing that can promote the light harvesting capacity via multiple reflections on the surface; II) the use of a double layered photoabsorber composed of a hydrophilic bottom layer of a polydopamine (PDA) coated glass fiber (GF/C) and a hydrophobic upper layer of a carbonized poly(vinyl alcohol)/polyvinylpyrrolidone (PVA/PVP) hydrogel on the supporter, which provides competitive benefit for preventing deposition of salt while quickly pumping the water. The 3D-printed solar evaporator can efficiently utilize solar energy (99%) with an evaporation rate of 1.60 kg m^-2 h^-1 and efficiency of 89% under 1 sun irradiation. The underlying reason for the high efficiency obtained is supported by the heat transfer mechanism. The 3D-printed solar evaporator could provide cheap drinking water in remote areas, while maintaining stable performance for a long term.

Progress of photothermal membrane distillation for decentralized desalination: A review

The conventional membrane distillation (MD) process is accompanied by large energy consumption, low thermal efficiency and inevitable requirements of centralized infrastructures, which impede its practical applications, especially in the offshore and remote off-grid areas. Thanks to the rapid development of efficient photothermal materials over the last decade, a new photothermal membrane distillation (PMD) process has emerged to harness abundant solar energy and localize heating on the membrane-feed water interface via photothermal effects. Driven by the temperature difference across the PMD membrane, water vapor can be generated on the membrane-feed surface, transported through membrane pores and condensed at permeate side to obtain freshwater, thus tackling the challenge of obtaining clean water using green energy. The PMD process avoids heating the entire bulk feed water and feed transportation from heat units to membrane modules, which save substantial amounts of energy. The interfacial localized heating intrinsically mitigates the temperature polarization across the membrane. The latent heat from vapor condensation can be effectively recovered via multi-level PMD configurations. As great efforts have been made to exploit PMD process, it is imperative to review the state-of-the-art progress of PMD and shed light on its future trend. Here, we briefly illustrate PMD mechanisms and membrane requirements, photothermal materials feasible for developing PMD membranes along with their light-to-heat mechanisms. This is followed by reviewing diverse approaches to prepare PMD membranes, which are classified into one-step fabrication and multi-step modification methods. Comprehensive discussion about PMD membrane performance in different configurations and their small pilot-scaled applications are provided. The effects of operational parameters and module designs are discussed in Section 6. Finally, the current challenges and future perspectives of PMD process are emphasized with the aim of providing guidance for future works.

Structure development of carbon-based solar-driven water evaporation systems

Pressing need goes ahead for accessing freshwater in insufficient supply countries and regions, which will become a restrictive factor for human development and production. In recent years, solar-driven water evaporation (SDWE) systems have attracted increasing attention for their specialty in no consume conventional energy, pollution-free, and the high purity of fresh water. In particular, carbon-based photothermal conversion materials are preferred light-absorbing material for SDWE systems because of their wide range of spectrum absorption and high photothermal conversion efficiency based on super-conjugate effect. Until now, many carbon-based SDWE systems have been reported, and various structures emerged and were designed to enhance light absorption, optimize heat management, and improve the efficient water transport path. In this review, we attempt to give a comprehensive summary and discussions of structure progress of the carbon-based SDWE systems and their working mechanisms, including carbon nanoparticles systems, single-layer photothermal membrane systems, bi-layer structural photothermal systems, porous carbon-based materials systems, and three dimensional (3D) systems. In these systems, the latest 3D systems can expand the light path by allowing light to be reflected multiple times in the microcavity to increase the light absorption rate, and its large heat exchange area can prompt more water to evaporate, which makes them the promising application foreground. We hope our review can spark the probing of underlying principles and inspiring design strategies of these carbon-based SDWE systems, and further guide device optimizations, eventually promoting in extensive practical applications in the future.

Interfacial solar vapor generation for desalination and brine treatment: Evaluating current strategies of solving scaling

Interfacial solar vapor generation, an efficient, sustainable, and low-cost method for producing clean water, has attracted great interest for application in solar desalination and wastewater treatment. Although recent studies indicated significant enhancement of overall performance by developing photothermal materials and constructing different dimensional systems, stable evaporation performance and long-term operation of the evaporator are hindered by severe scaling issues. In this critical review, we present the latest strategies in reducing salt accumulation on the evaporator for solar desalination and brine treatment. We first demonstrate the consequences of salt accumulation, and then discuss various self-cleaning methods based on bio-inspired concepts and other strategies such as physical cleaning, ion rejection and exchange, fast ion diffusion, and controlled crystallization, etc. Importantly, we discuss and address the rational design of the evaporator via establishing a relationship model between its porosity, thickness, and thermal conductivity. Lastly, we evaluate salt-resistance strategies, evaporation performance, and possibilities of real application in different evaporation systems with scaling-resistant abilities.

Enhanced Steam Temperature Enabled by a Simple Three-Tier Solar Evaporation Device

Interfacial water evaporation technology by using solar energy provides one of the promising pathways for freshwater shortage management. However, current research mainly focuses on the improvement of evaporation efficiency by macro or microregulations, ignoring the steam temperature, which is a manifestation of the quality of water. Herein not only is a high-rate solar evaporation achieved but also steam temperature is enhanced by a simple three-tier (wet absorber-air gap-dry absorber) device. In a routine interfacial evaporation test, the evaporator achieves a stable evaporation rate up to 2.15 kg m-2 h-1 under one sun, demonstrating a competitive evaporation rate compared with other reports. With the three-tier device, the steam temperature can increase 33.7%, 41.13%, and 47% without dry absorber under one sun, two sun, and three sun illumination, respectively. At the same time, the steam temperature can be as high as 95.5 °C under three sun intensities. This work provides the possibility of using a simple three-tier device for high-temperature steam generation without extra energy input, which contributes to an idea for future research on the production high-quality water.