Quantitative insights into major constituents contained in or released by electronic cigarettes: Propylene glycol, vegetable glycerin, and nicotine

A Comparative Study of the Effects of Electronic Cigarette and Traditional Cigarette on the Pulmonary Functions of C57BL/6 Male Mice

INTRODUCTION

Electronic cigarettes (E-cigs) are in a controversial state. Although E-cig aerosol generally contains fewer harmful substances than smoke from burned traditional cigarettes, aerosol along with other compounds of the E-cigs may also affect lung functions and promote the development of lung-related diseases. We investigated the effects of E-cig on the pulmonary functions of male C57BL/6 mice and reveal the potential underlying mechanisms.

METHODS

A total of 60 male C57BL/6 mice were randomly divided into four groups. They were exposed to fresh-air, traditional cigarette smoke, E-cig vapor with 12 mg/mL of nicotine, and E-cig with no nicotine for 8 weeks. Lung functions were evaluated by using quantitative analysis of the whole body plethysmograph, FlexiVent system, lung tissue histological and morphometric analysis, and RT-PCR analysis of mRNA expression of inflammation-related genes. In addition, the effects of nicotine and acrolein on the survival rate and DNA damage were investigated using cultured human alveolar basal epithelial cells.

RESULTS

Exposure to E-cig vapor led to significant changes in lung functions and structures including the rupture of the alveolar cavity and enlarged alveolar space. The pathological changes were also accompanied by increased expression of interleukin-6 and tumor necrosis factor-α.

CONCLUSIONS

The findings of the present study indicate that the safety of E-cig should be further evaluated.

IMPLICATIONS

Some people currently believe that using nicotine-free E-cigs is a safe way to smoke. However, our research shows that E-cigs can cause lung damage regardless of whether they contain nicotine.

Fifteen-minute consultation: What paediatricians need to know about vaping

The prevalence of vaping among children and young people (CYP) is on the rise. This is perhaps a result of perceiving vaping as 'harmless', especially after an extensive public acceptance through the UK Government's promotion of vaping in smoking cessation as well as lax regulations on advertisements. More awareness and research of the effects of vaping is necessary and a call for immediate public health strategies to be implemented in the UK. This article highlights essential facts about vaping, signs of addiction and cessation support for CYP as part of health promotion.

Recent advances in the analysis of electronic cigarette liquids and aerosols: Sample preparation and chromatographic characterization

Electronic cigarette (e-cigarette) usage has risen dramatically worldwide in recent years. It has been publicized as a safer alternative to the conventional combustible cigarette. This, however, has not yet been supported by robust toxicological research evidence. Analysis of the chemical compositions of e-liquids and generated aerosols is an important step in evaluating the toxicity effects of e-cigarettes. Currently, a broad spectrum of analytical methods have been employed for qualitative and quantitative analysis of chemical compositions of e-cigarette liquids and aerosols. The aim of this article is to review the advances in the chromatographic characterization of chemical composition of the latter in the recent five years. In addition, sample preparation methods for e-liquids and aerosols are surveyed and discussed. A study of the relevant literature indicates that, expectedly, gas chromatography and liquid chromatography with a variety of detection systems, particularly mass spectrometry, have been the main analytical techniques used in this field. Sample preparation procedures primarily include headspace sampling, dilute-and-shoot approach, liquid-liquid extraction and sorbent-based extraction for e-liquids and for aerosols (the latter usually with laboratory-built collection devices). Some challenges of current e-cigarette analytical research, and an overview on prospective work are also presented.

Effect of altered human exposome on the skin and mucosal epithelial barrier integrity

Pollution in the world and exposure of humans and nature to toxic substances is continuously worsening at a rapid pace. In the last 60 years, human and domestic animal health has been challenged by continuous exposure to toxic substances and pollutants because of uncontrolled growth, modernization, and industrialization. More than 350,000 new chemicals have been introduced to our lives, mostly without any reasonable control of their health effects and toxicity. A plethora of studies show exposure to these harmful substances during this period with their implications on the skin and mucosal epithelial barrier and increasing prevalence of allergic and autoimmune diseases in the context of the "epithelial barrier hypothesis". Exposure to these substances causes an epithelial injury with peri-epithelial inflammation, microbial dysbiosis and bacterial translocation to sub-epithelial areas, and immune response to dysbiotic bacteria. Here, we provide scientific evidence on the altered human exposome and its impact on epithelial barriers.

Rapid determination of levels of the main constituents in e-liquids by near infrared spectroscopy

Use of e-cigarettes is increasing, alongside an expanding variety of devices and e-liquids. To match this growth and in line with the expanding legal and regulatory requirements applicable to manufacturers of e-cigarettes (e.g. disclosure of list of ingredients and quantities thereof in a product), rapid methods for determining levels of the main e-liquid constituents-namely, propylene glycol (PG), vegetable glycerol (VG), water and nicotine-are needed. We have assessed the ability of near infrared (NIR) spectroscopy, coupled with partial least squares (PLS) regression, to predict the levels of these constituents in e-liquid formulations. Using NIR spectral data from a large set of reference e-liquids incorporating working concentration ranges, flavourings, and other ingredients, linear calibration models were established for PG, VG, water and nicotine (predicted vs theoretical values, all R2 > 0.995). The performance of these models was then evaluated on commercial e-liquids using NIR and compared to results obtained by gas chromatography (GC). A strong correlation was observed between NIR-predicted values and measured values for PG, VG and nicotine (all R2 > 0.955). There was less consistency between predicted and GC measured values for water due to the relatively high limit of quantification (LOQ) of the GC method (2.6% w/w) versus the e-liquid content (0-18% w/w). The LOQ of the NIR method for water was 0.6% w/w, suggesting that NIR may be a more accurate method than GC to predict water concentration in e-liquids, especially at low levels (< 2.6% w/w). Collectively, although limitations of the technique have been identified, specifically for e-liquids containing compounds that might interfere with the set calibrations, our findings suggest that NIR combined with PLS regression is a suitable tool for rapid, simultaneous and high-throughput measurement of PG, VG, water and nicotine levels in most commercial e-liquids.

Chemical analysis of electronic cigarette liquids (e-liquids) and direct nicotine quantitation using surface-assisted flowing atmospheric-pressure afterglow desorption/ionization mass spectrometry (SA-FAPA-MS)

Ambient desorption/ionization mass spectrometry (ADI-MS) has been widely used for direct analysis of real samples without sample preparation or separation. Studies on the quantification of low molecular weight compounds in complex matrices with ADI-MS remain scarce. In this paper, we report the application of surface-assisted flowing atmospheric-pressure afterglow mass spectrometry (SA-FAPA-MS) for fast qualitative screening of electronic cigarette liquid (e-liquids) ingredients and direct quantification of nicotine. The quantification approach is rapid, uses a deuterated D4-nicotine standard spike, and does not require a preceding chromatography step or other methods to remove the complex sample matrix. Selected e-liquids were directly applied on thin-layer chromatography (TLC) plate surfaces (normal phase (NP) silica, reversed phase (RP) modified silica, cyano (CN) modified silica, and dimethyl (RP2) modified silica) after dilution and internal standard spiking. The plates served purely as sample carriers and no analyte separation was performed. Promising qualitative results were obtained, demonstrating the ability to detect nicotine alkaloids using this approach and the ability to differentiate e-liquids based on their flavor variations. In addition, dimethyl- (RP2-) and cyano-modified (CN-) silica surfaces were selected for quantification based on performance results of previous studies. It was shown that results were in high accordance with high-performance liquid chromatography (HPLC) experiments with lowest deviations <3% on dimethyl surfaces. Additional quantitative experiments including a certified reference material achieved equally satisfying results with lowest deviations of -1.1% from the certified nicotine content. For nicotine, detection limits down to the fmol range (96 fmol on CN and 20 fmol on RP2) were obtained. A detailed comparison of glass surfaces with functionalized surfaces showed that the functionalized surfaces were superior in terms of sample application reproducibility, mass spectra quality, sensitivity, and information density. Thus, functionalized thin-layer surfaces are considered promising tools for both qualitative and quantitative ADI-MS analysis of complex samples.

Preliminary study on the effect of using heat-not-burn tobacco products on indoor air quality

In this study, the effect of the use of heat-not-burn (HnB) products on indoor air quality (IAQ) was evaluated. To do this, the concentrations of nicotine, propylene glycol (PG), and vegetable glycerin (VG) directly emitted when using HnB products were analyzed and compared to those from conventional cigarettes. Furthermore, the levels of VOCs, aldehydes, nanoparticle, and particulate matter (PM) detected when subjects used HnB products in the exposure chamber were evaluated the effect on IAQ. As a result, the range of nicotine levels transferred by HnB products (0.8-1.2 mg cigarette^-1) is lower than that by conventional cigarettes (2.4-3.6 mg cigarette^-1). On the other hand, the range of VG levels emitted from HnB products (3.1-5.9 mg cigarette^-1) were higher than that emitted from conventional cigarettes (0.6-3.0 mg cigarette^-1). In addition, although the amount generated from HnB products was small compared to those from conventional cigarettes, various kinds of VOCs, aldehydes, nanoparticle and PM were produced, and these were confirmed to affect IAQ.

Emission and Gas/Particle Partitioning Characteristics of Nicotine in Aerosols for Electronic Cigarettes

Nicotine is a dependence-producing component in electronic cigarettes. The nicotine release characteristics of electronic cigarettes are closely connected with human exposure and respiratory health. In this paper, a theoretical model was established to study the effects of the compositions of e-liquids and the heating powers of device on the emission and gas/particle partitioning characteristics of nicotine in aerosols at equilibrium. The simulation results of nicotine emissions were compared with the experimental data. The errors between them were within a reasonable range. At a larger heating power level, a higher nicotine yield and a larger vaporization amount of e-liquids could be observed. Under the same heating power condition, a higher vegetable glycerin content in e-liquids could result in a lower nicotine emission. When the heating powers supplied by the device increased, a larger mass fraction of particle-phase nicotine in aerosols at equilibrium would appear. As more propylene glycol was added into e-liquids, a lower mass fraction of gas-phase nicotine would exist in aerosols at equilibrium. The results may provide more information for the industry to set technical standards for electronic cigarettes and for the government department to make regulatory policies.

Effects of e-liquid flavor, nicotine content, and puff duration on metal emissions from electronic cigarettes

Vaping is the action of inhaling and exhaling aerosols from electronic cigarettes. The aerosols contain various amounts of toxic chemicals, including metals. The purpose of this study was to evaluate factors that can influence metal levels, including flavor and nicotine content in the e-liquid, and puff duration. Aerosols were collected from both closed-system (cartridge-based) and open-system e-cigarettes using e-liquids with different flavors (fruit, tobacco, and menthol), nicotine content (0, 6, 24, and 59 mg/mL), and different puff durations (1, 2, and 4 s). The concentrations of 14 metals in the collected aerosols were measured using inductively coupled plasma mass spectroscopy. Aerosol concentrations of As, Fe, and Mn varied significantly among fruit, tobacco, and menthol flavors in both closed-system and open-system devices. Concentrations of Al, Fe, Sn, and U were significantly higher in tobacco or menthol flavored aerosols compared to fruit flavors in closed-system devices. Aerosol W levels were significantly higher in tobacco flavored aerosols compared to fruit flavors in open-system devices. Concentrations of As, Fe, and Mn were higher in tobacco flavored aerosols compared to menthol flavors in both types of devices. The median Pb concentration decreased significantly from 15.8 to 0.88 μg/kg when nicotine content increased from 0 to 59 mg/mL, and median Ni concentration was 9.60 times higher in aerosols with nicotine of 59 mg/mL compared to 24 mg/mL (11.9 vs. 1.24 μg/kg) for closed-system devices. No significant differences were observed in aerosol metal concentrations for different puff durations. Aerosol metal concentrations varied widely between different flavors and nicotine content but not by puff duration. Flavor and nicotine content of the e-liquid could be potential factors in metal emissions. Some elements showed higher concentrations under certain conditions, highlighting the urgent need of developing strict product regulations, especially on e-liquid composition and nicotine content to inform e-cigarette users about metal exposure through vaping.

The chemistry and toxicology of vaping

Vaping is the process of inhaling and exhaling an aerosol produced by an e-cigarette, vape pen, or personal aerosolizer. When the device contains nicotine, the Food and Drug Administration (FDA) lists the product as an electronic nicotine delivery system or ENDS device. Similar electronic devices can be used to vape cannabis extracts. Over the past decade, the vaping market has increased exponentially, raising health concerns over the number of people exposed and a nationwide outbreak of cases of severe, sometimes fatal, lung dysfunction that arose suddenly in otherwise healthy individuals. In this review, we discuss the various vaping technologies, which are remarkably diverse, and summarize the use prevalence in the U.S. over time by youths and adults. We examine the complex chemistry of vape carrier solvents, flavoring chemicals, and transformation products. We review the health effects from epidemiological and laboratory studies and, finally, discuss the proposed mechanisms underlying some of these health effects. We conclude that since much of the research in this area is recent and vaping technologies are dynamic, our understanding of the health effects is insufficient. With the rapid growth of ENDS use, consumers and regulatory bodies need a better understanding of constituent-dependent toxicity to guide product use and regulatory decisions.

A review of nicotine-containing electronic cigarettes-Trends in use, effects, contents, labelling accuracy and detection methods

Electronic cigarettes (ECs) are thought to be less harmful than traditional combustible cigarettes and were originally intended to help smokers quit. Over the past two decades, they have especially gained popularity with the younger generation. To date, there are over 7000 unique e-liquid flavours available and over 400 different e-cigarette brands. The accuracy of nicotine strength labelling in e-liquids was assessed in this work. Twenty-three studies from around the world were chosen to assess the level and frequency of nicotine mislabelling in 545 e-liquid products. Nicotine strengths were most commonly mislabelled by between 5% and 20%, with the majority testing lower than what the label indicated. Fifteen European e-liquids that were assessed were labelled as 20 mg/ml or less, yet when tested, they contained more than 20 mg/ml of nicotine. One e-liquid that was supposed to contain no nicotine in fact contained 23.91 mg/ml of nicotine. Furthermore, the difference between the medians of the available labelled and experimental nicotine concentrations was significant (p < 0.001, Wilcoxon signed rank test). Preliminary studies show that high nicotine levels delivered via aerosol increase the risk for nicotine poisoning and cause airway inflammation. Other EC ingredients, such as flavourings, contribute to EVALI and 'popcorn lung'. There is evidence that certain flavourings, such as menthol, reinforce the effects of nicotine and modify drug absorption and metabolism. There is a global need for better quality control in EC products in order to make these safe for consumers.

Vaping in adolescents: epidemiology and respiratory harm

PURPOSE OF REVIEW

This review highlights epidemiologic changes in e-cigarette use in adolescents, discusses recent advances in aerosolized nicotine delivery, and provides and updated profile of research related to the lung-specific harm of e-cigarettes.

RECENT FINDINGS

In the past decade, nicotine-containing e-cigarettes have emerged as the most popular tobacco and nicotine delivery modality among adolescents in the United States. The surge in popularity of these devices has coincided with an outbreak of vaping-related lung injury, bringing e-cigarette use to national attention, and creating a great deal of confusion regarding their potential for respiratory harm. Newer pod-based devices and formulations of e-liquids have resulted in products appeal to youth and deliver nicotine with increasing efficiency. E-liquid aerosols are associated with direct harm to respiratory epithelium and have been shown to alter pulmonary function, inflammation, mucociliary clearance, and lung histology.

SUMMARY

Although the long-term harms of regular e-cigarette use are unknown, numerous studies including early longitudinal data suggest e-cigarette use is associated with incidence of respiratory disease, independent of concurrent traditional cigarette use. Improved understanding and recognition of harm will contribute to the basis of further studies examining the role of e-cigarettes on chronic respiratory disease and will inform future prevention education.