Utilization of edible fungi residues towards synthesis of high-performance porous carbon for effective sorption of Cl-VOCs

Catalytically Active Carbon for Oxygen Reduction Reaction in Energy Conversion: Recent Advances and Future Perspectives

The shortage and unevenness of fossil energy sources are affecting the development and progress of human civilization. The technology of efficiently converting material resources into energy for utilization and storage is attracting the attention of researchers. Environmentally friendly biomass materials are a treasure to drive the development of new-generation energy sources. Electrochemical theory is used to efficiently convert the chemical energy of chemical substances into electrical energy. In recent years, significant progress has been made in the development of green and economical electrocatalysts for oxygen reduction reaction (ORR). Although many reviews have been reported around the application of biomass-derived catalytically active carbon (CAC) catalysts in ORR, these reviews have only selected a single/partial topic (including synthesis and preparation of catalysts from different sources, structural optimization, or performance enhancement methods based on CAC catalysts, and application of biomass-derived CACs) for discussion. There is no review that systematically addresses the latest progress in the synthesis, performance enhancement, and applications related to biomass-derived CAC-based oxygen reduction electrocatalysts synchronously. This review fills the gap by providing a timely and comprehensive review and summary from the following sections: the exposition of the basic catalytic principles of ORR, the summary of the chemical composition and structural properties of various types of biomass, the analysis of traditional and the latest popular biomass-derived CAC synthesis methods and optimization strategies, and the summary of the practical applications of biomass-derived CAC-based oxidative reduction electrocatalysts. This review provides a comprehensive summary of the latest advances to provide research directions and design ideas for the development of catalyst synthesis/optimization and contributes to the industrialization of biomass-derived CAC electrocatalysis and electric energy storage.

A new attempt to control volatile organic compounds (VOCs) pollution - Modification technology of biomass for adsorption of VOCs gas

The detrimental impact of volatile organic compounds on the surroundings is widely acknowledged, and effective solutions must be sought to mitigate their pollution. Adsorption treatment is a cost-effective, energy-saving, and flexible solution that has gained popularity. Biomass is an inexpensive, naturally porous material with exceptional adsorbent properties. This article examines current research on volatile organic compounds adsorption using biomass, including the composition of these compounds and the physical (van der Waals) and chemical mechanisms (Chemical bonding) by which porous materials adsorb them. Specifically, the strategic modification of the surface chemical functional groups and pore structure is explored to facilitate optimal adsorption, including pyrolysis, activation, heteroatom doping and other methods. It is worth noting that biomass adsorbents are emerging as a highly promising strategy for green treatment of volatile organic compounds pollution in the future. Overall, the findings signify that biomass modification represents a viable and competent approach for eliminating volatile organic compounds from the environment.

Biomass Derived, Hierarchically Porous, Activated Starbons® as Adsorbents for Volatile Organic Compounds

The use of potassium hydroxide activated Starbons® derived from starch and alginic acid as adsorbents for 29 volatile organic compounds (VOCs) was investigated. In every case, the alginic acid derived Starbon (A800K2) was found to be the optimal adsorbent, significantly outperforming both commercial activated carbon and starch derived, activated Starbon (S800K2). The saturated adsorption capacity of A800K2 depends on both the size of the VOC and the functional groups it contains. The highest saturated adsorption capacities were obtained with small VOCs. For VOC's of similar size, the presence of polarizable electrons in lone pairs or π-bonds within non-polar VOCs was beneficial. Analysis of porosimetry data suggests that the VOC's are being adsorbed within the pore structure of A800K2 rather than just on its surface. The adsorption was completely reversible by thermal treatment of the saturated Starbon under vacuum.

Challenges and perspectives of green-like lignocellulose pretreatments selectable for low-cost biofuels and high-value bioproduction

Lignocellulose represents the most abundant carbon-capturing substance that is convertible for biofuels and bioproduction. Although biomass pretreatments have been broadly applied to reduce lignocellulose recalcitrance for enhanced enzymatic saccharification, they mostly require strong conditions with potential secondary waste release. By classifying all major types of pretreatments that have been recently conducted with different sources of lignocellulose substrates, this study sorted out their distinct roles for wall polymer extraction and destruction, leading to the optimal pretreatments evaluated for cost-effective biomass enzymatic saccharification to maximize biofuel production. Notably, all undigestible lignocellulose residues are also aimed for effective conversion into value-added bioproduction. Meanwhile, desired pretreatments were proposed for the generation of highly-valuable nanomaterials such as cellulose nanocrystals, lignin nanoparticles, functional wood, carbon dots, porous and graphitic nanocarbons. Therefore, this article has proposed a novel strategy that integrates cost-effective and green-like pretreatments with desirable lignocellulose substrates for a full lignocellulose utilization with zero-biomass-waste liberation.

Adsorption of multicomponent VOCs on various biomass-derived hierarchical porous carbon: A study on adsorption mechanism and competitive effect

Biomass-derived porous carbon materials are potential adsorbents for VOCs. In this work, biomass-derived nitrogen-doped hierarchical porous carbons (NHPCs) were synthesized by a one-step pyrolysis activation combined with nitrogen doping method from several biomass wastes (corn straw, wheat stalk, bamboo, pine, and corncob). NHPCs have a hierarchical porous structure with micro-meso-macropores distribution, nitrogen doping, large specific surface area, and pore volume. The corncob derived carbon (NHPC-CC) has the best activation result as analyses showed that a lower ash content and higher total cellulose composition content of the biomass result in a better pore activation effect. Single and multi-component dynamic adsorption tests of typical VOCs (benzene, toluene, and chlorobenzene) were conducted on NHPCs in laboratory conditions (∼500 ppm). Promising VOC adsorption capacity and great adsorption kinetics with low mass transfer resistance were found on NHPCs. Correlation analysis showed that the high VOC adsorption capacity and great adsorption kinetics can be attributed to the large surface area of micro-mesopores and the mass transfer channels provided by meso-macropores respectively. The competitive dynamic adsorption tests revealed that the VOC with lower saturated vapor pressure has more adsorption sites on the surface of micro-mesopores and stronger adsorption force, which results in the higher adsorption capacity and desorption caused by substitution reaction in VOCs competitive adsorption process. In detail, the process of toluene and chlorobenzene competitive adsorption was described. Besides, well recyclability of NHPC-CC was revealed as the VOCs adsorption capacity reductions were less than 10% after four adsorption-desorption cycles. All studies showed that the NHPC-CC could be potential adsorbent for VOCs in industrial process.

Sustainable Environmental Assessment of Waste-to-Energy Practices: Co-Pyrolysis of Food Waste and Discarded Meal Boxes

The reuse of biomass waste is conducive to the recovery of resources and can solve the pollution problem caused by incineration and landfill. For this reason, the thermogravimetric analyzer (TGA) was used to study the pyrolysis of the mushroom sticks (MS) and discarded meal boxes at different heating rates (10 °C·min^-1, 20 °C·min^-1, 30 °C·min^-1). The statistical analysis showed that the factors of pyrolysis temperature and particle size had a greater effect, while the heating rate was significant. The TGA revealed that the maximum weight loss rate of the co-pyrolysis of MS and discarded meal boxes increased with the rise of the heating rate, the temperature at which the pyrolysis started and ended increased, and the thermal weight loss displayed a hysteresis phenomenon. By comparing the theoretical heat weight loss curves with the experimental curves, a synergistic effect of the co-pyrolysis process between MS and discarded meal boxes was demonstrated, and the co-pyrolysis process resulted in a reduction in the solid residue content of the products. The Coats-Redfern method was used to fit the pyrolysis process of MS and discarded meal boxes, which applied the first-order kinetic model to describe the main process of pyrolysis and obtained the reaction activation energy between 43 and 45 kJ·mol^-1. The results indicated that co-pyrolysis of MS and discarded meal boxes could decrease the activation energy of the reaction, make the reaction easier, promote the degree of pyrolysis reaction, reduce the generation of pollutants, and provide a theoretical basis for the recycling and energy utilization of MS and discarded meal boxes.

Manganese oxide-modified biochar derived from discarded mushroom-stick for the removal of Sb(III) from aqueous solution

In this study, discarded mushroom-stick, which is widely available, was selected as a precursor to prepare MnO₂-modified biochar (MBC) for Sb(III) removal. Several characterisation methods (SEM, BET, XPS, FT-IR, and XRD) were used to explore the mechanisms of antimony adsorption onto MBC. The results showed that MBC is a mesoporous material with a fluffy structure and a higher specific surface area (23.56 and 32.09 m²·g^-1) than PBC600 (13.62 m²·g^-1), exhibiting superior and stable adsorption capacities for Sb(III) (50.30 mg·g^-1 for 1/30MBC600 and 64·12 mg·g^-1 for 1/20MBC600) across a wide pH range (pH 4-8). X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FT-IR) spectroscopy analyses indicated that the main oxides and functional groups involved in the adsorption were manganese oxides and hydroxyl groups. Forty-four per cent of the adsorbed Sb(III) was oxidised to Sb(V) by manganese oxides or hydroxyl groups both on the surface of biochar and in solution. According to adsorption kinetics and isotherms, the adsorption process of Sb(III) is chemisorption, which includes monolayer and multilayer heterogeneous chemisorption processes. To sum up, MBC is an excellent adsorbent for the capture of Sb(III) from contaminated water with strong potential for future application.

Utilizing waste duckweed from phytoremediation to synthesize highly efficient FeNxC catalysts for oxygen reduction reaction electrocatalysis

Duckweed is a universal aquatic plant to remove nitrogen source pollutants in the field of phytoremediation. Due to the naturally abundant nitrogen, synthesis of carbon materials from duckweed would be a high-value approach. In oxygen reduction reaction (ORR) of metal-air batteries and fuel cells, non-noble metals and heteroatoms co-doped electrocatalysts with excellent catalytic activity and remarkable stability are promising substitutes for Pt-based catalysts. The first-class ORR performance is determined by appropriate pore structure and active sites, which are strongly associated with the feasible synthesis methods. Herein, a facile one-step synthesis strategy for the transition metals- and nitrogen-codoped carbon (MN_xC) based catalysts with hierarchically porous structure was developed. The MN_xC (M = Fe, Co, Ni, and Mn) active sites were constructed and FeN_xC (D-ZB-Fe) was the best electrocatalyst with excellent ORR performance. Results showed that D-ZB-Fe exhibited an obvious honeycomb porous structure with specific surface area of 1342.91 m²·g^-1 and total pore volume of 1.085 cm³·g^-1. It also possessed considerable active atoms and sites, where the proportion of pyridine N and graphite N was up to 72.9%. The above feature made for a superior ORR electrocatalytic activity. In specific, the onset and half-wave potential were 0.974 V and 0.857 V vs. RHE (Reversible Hydrogen Electrode), respectively. When compared with performances of commercial Pt/C, the four-electron pathway and relatively low peroxide yield, ca. 5%, were almost equivalent. Furthermore, D-ZB-Fe showed an excellent stability and remarkably methanol tolerance by the durability test. In conclusion, this research provides a new synthesis strategy of electrocatalysts with porous structures and active sites.

Hydrothermal carbonization of garden waste by pretreatment with anaerobic digestion to improve hydrohcar performance and energy recovery

Sustainable and resourceful utilization of garden waste with high lignocellulosic content remains a huge challenge, anaerobic digestion (AD) and hydrothermal treatment provide prospective technologies with achieving environmental and economic benefits. In this study, a 7-28 d AD was provided as a biomass pretreatment means and combined with hydrothermal carbonization (HTC) to treat three typical garden wastes (leaves, branches, grass). The results showed that AD pretreatment could effectively change the surface composition and structure properties of the feedstocks and thus modulating the properties of the hydrochar downstream. Compared to the unpretreatment samples, the specific surface area (SSA), higher heating value (HHV), energy density and nutrient elements (P and K) of hydrochar obtained by AD pretreatment were significantly improved and enriched, respectively. Specifically, the highest HHV of hydrochar obtained from leaves, branches, and grass were 25.71, 25.63, and 23.81 MJ/kg, which obtained with 21, 14, and 7 d of AD pretreatment respectively. The P contents of hydrochar of leaves and grass pretreated with AD for 14 and 7 d were 205% and 15% higher than those without AD pretreatment, respectively. Additionally, in this coupled system, the biomass energy recovery of 90.2% (78.2% biochar and 12.0% CH₄) was achieved on leaves pretreated with AD for 21 d. Energy recovery of 81.2% (66.8% biochar, 14.4% CH₄) and 71.3% (39.7% biochar, 31.6% CH₄) was obtained by 14 d of AD pretreatment on branches and grass, respectively. Thus, this study enhances energy utilization efficiency and reduces secondary waste generation, providing valuable new insights into AD coupled with HTC technology.

Triple combination of natural microbial action, etching, and gas foaming to synthesize hierarchical porous carbon for efficient adsorption of VOCs

Fungi residue, vinasse, and biogas residue differ from general biomass waste due to natural microbial action. Microbial fermentation helps create natural channels for the permeation of activators and produces proteins for natural nitrogen doping. Inspired by these advantages on porous carbon synthesis, this study adopted dual activators of KOH and KHCO₃ to synthesize porous carbon with different pore ratios for efficient adsorption of volatile organic compounds (VOCs). The fungi residue possessed the least lignin due to the most severe microbial action, contributing to the best pore structures after activation. The etching effect from potassium compounds and gas foaming from the carbonate decomposition contributed to creating hierarchical porous carbon with ultra-high surface area, ca. 1536.8-2326.5 m²/g. However, KHCO₃ addition also caused nitrogen erosion, such that lower adsorption capacity was attained even with a higher surface area when the mass ratio of KOH/KHCO₃ decreased from 2.5:0.5 to 2:1. The maximum adsorption capacities of chlorobenzene (CB) and benzene (PhH) reached 594.0 and 394.3 mg/g, respectively. Pore structure variations after adsorption were evaluated by freeze treatment to discover the adsorption mechanism. The surface area after CB and PhH adsorption decreased 40.3% and 34.5%, respectively. Most of the mesopores might transform into micropores due to the mono/multilayer stacking of adsorbates. The VOC adsorption kinetics were simulated by the Pseudo-first- and -second-order models and Y-N model. This paper provides a new approach for high-value biomass waste utilization after microbial action to synthesize efficient adsorbents for VOCs.

Lignin-based adsorbent-catalyst with high capacity and stability for polychlorinated aromatics removal

The utilization of lignin as carbonaceous material for pollution adsorption provides an alternative way for lignocellulose valorization. Here in, lignin-based adsorbents (i.e., LC-A, LC-B, and LC-C) were prepared and used for the removal of o-DCB (a toxic gaseous pollutant). LC-B exhibited the best adsorption capacity (718.2 mg/g) when comparing with LC-A (93.1 mg/g), LC-C (10.2 mg/g), and activated carbon (72.7 mg/g). LC-B also demonstrated excellent recycling stability with the adsorption capacity of 710.8 mg/g after five runs. More importantly, LC-B supported Ru adsorbent catalyst could effectively remove o-DCB with removal rate >80% under a wide range of temperature (50-300°C). The excellent performance of lignin-based adsorbents could be attributed to its abundant pore structure, high specific surface area (1618.55 m²/g), enhanced graphitization degree as well as the abundant hydroxyl functional groups. The present work provided a cost-effective strategy for pollution control by lignin-based material.

Facile synthesis of tailored mesopore-enriched hierarchical porous carbon from food waste for rapid removal of aromatic VOCs

Due to the large amount, environmental impact, and complex properties of accumulated food waste, its disposal and valorization has become a growing global concern and challenges. In this study, a series of mesopore-enriched hierarchical porous carbons were synthesized from a mixture of two food waste components (peptone and bone). The prepared materials were employed for the rapid adsorption of aromatic volatile organic compounds (VOCs). The pore structures, morphology and surface chemistry of the food waste-based microporous activated carbon (PCs) and mesopore-enriched hierarchical porous carbons (PC/BCs) were characterized and then compared. PC/BCs presented larger pore volume (2.45 cm³/g vs. 1.25 cm³/g) than the PCs because of their activation and the template effect of the bone, allowing them to exhibit satisfactory adsorption capacities (139.5 mg/g for benzene and 440.7 mg/g for toluene) and adsorption rate (0.285 min^-1 for benzene and 0.236 min^-1 for toluene) for aromatic VOCs. In addition, a strong linear relationship (R² = 0.957) was also established between the adsorption rate k and total pore volume, highlighting the role of mesopores in PC/BCs, which contributed 60% to the total pore volume, during the rapid capture of VOCs. Further, PC/BCs also showed excellent thermal regeneration performance for more than four runs. The results of this study provide a feasible approach to fabricating mesopore-enriched hierarchical porous carbon from food waste, which could enable the rapid removal of VOCs.

Disassembly of lignocellulose into cellulose, hemicellulose, and lignin for preparation of porous carbon materials with enhanced performances

Lignocellulose is the primary component of many biomasses, including corn straw. Herein, lignocellulose in corn straw was disassembled into the individual polymers, cellulose, hemicellulose, and lignin via a mild and facile method. Subsequently, three porous carbon materials were prepared by carbonization and chemical activation of cellulose (PCCC), hemicellulose (PCHC), and lignin (PCLC). The three materials showed higher specific surface areas (2565.7, 2996.1, and 2590.3 m² g^-1) and higher porosities (1.4261, 1.5876, and 1.2406 cm³ g^-1) than that of PCCS, a porous carbon material derived from raw corn straw (1993 m² g^-1 and 1.19 cm³ g^-1). Of note, PCCC and PCHC exhibited higher adsorption (1025.5 and 950.1 mg g^-1) of brilliant green (BG), than PCCS (876.7 mg g^-1). Besides, the BG adsorption capacities of the designed materials were higher than that of most adsorbents, and 2-2.5 times higher than that of graphite oxide (416.7 mg g^-1). These study results indicate that the disassembly of lignocellulosic biomass into cellulose, hemicellulose, and lignin is an effective strategy for preparing various porous carbon materials with enhanced performances.