Electro-oxidation of secondary effluents from various wastewater plants for the removal of acetaminophen and dissolved organic matter

Harnessing the potential of microalgae-based systems for mitigating pesticide pollution and its impact on their metabolism

Due to increased pesticide usage in agriculture, a significant concentration of pesticides is reported in the environment that can directly impact humans, aquatic flora, and fauna. Utilizing microalgae-based systems for pesticide removal is becoming more popular because of their environmentally friendly nature, ability to degrade pesticide molecules into simpler, nontoxic molecules, and cost-effectiveness of the technology. Thus, this review focused on the efficiency, mechanisms, and factors governing pesticide removal using microalgae-based systems and their effect on microalgal metabolism. A wide range of pesticides, like atrazine, cypermethrin, malathion, trichlorfon, thiacloprid, etc., can be effectively removed by different microalgal strains. Some species of Chlorella, Chlamydomonas, Scenedesmus, Nostoc, etc., are documented for >90% removal of different pesticides, mainly through the biodegradation mechanism. The antioxidant enzymes such as ascorbate peroxidase, superoxide dismutase, and catalase, as well as the complex structure of microalgae cell walls, are mainly involved in eliminating pesticides and are also crucial for the defense mechanism of microalgae against reactive oxygen species. However, higher pesticide concentrations may alter the biochemical composition and gene expression associated with microalgal growth and metabolism, which may vary depending on the type of strain, the pesticide type, and the concentration. The final section of this review discussed the challenges and prospects of how microalgae can become a successful tool to remediate pesticides.

Biotoxicity attenuation and the underlying physicochemical mechanism of biochar aged under simulated natural environmental conditions

Biochar (BC), with the benefits of enhancing soil fertility, absorbing heavy metals, carbon sequestration, and mitigating the greenhouse effect, has been extensively used for soil remediation. However, the long-term changes in the biotoxicity of BC under complex environmental conditions, which are the key factors influencing the sustainable application of BC in soil, are still unclear. Herein, the biotoxicity of BC aged with various processes, including dry‒wet cycle (DW) aging, freeze‒thaw cycle (FT) aging, ultraviolet irradiation (UV) aging, and low molecular weight organic acid (OA) aging, was systematically investigated by Escherichia coli (E. coli) culture experiments. The toxicity attenuation rate (%·week-1) was proposed to more concisely and clearly compare the influence of different aging methods on BC toxicity. The results indicated that after 5 weeks of aging, the toxicity attenuation rate during the four aging modes followed the order OA aging > FT aging > UV aging > DW aging. BC was nontoxic after 1 week of OA aging, 4 weeks of FT aging, 7 weeks of UV aging, and 14 weeks of DW aging. Spectroscopic characterizations revealed that humic acids in the dissolved organic matter of BC were the main reason for the biotoxicity. In addition, the attenuation of environmentally persistent free radicals on BC during aging was also an important factor for reducing environmental toxicity. This work provides insight into the detoxification mechanism of the BC aging process under ordinary environmental conditions and guidance for the safe application of BC in soil.

Electrochemical degradation of favipiravir (anti-viral) drug from aqueous solution: optimization of operating parameters using the response surface method

The aim of the current study is to investigate the efficacy of the electro-Fenton process in the degradation of favipiravir drugs from aqueous solutions, which has increased in use as a result of the COVID-19 pandemic. The Response Surface Methodology (RSM) was developed using a Central Composite Design (CCD) in which five independent variables, including Fe2+ concentration, current density, initial FVP concentration, pH, and reaction time, were coded with high and low levels, and the maximum removal percentage of FVP (97.8%) and COD (91.65%) were determined as responses. In the EF process, 530 mg/L H2O2 was produced in-situ by cathodic reduction of O2 in aqueous solution and thus FVP has been successfully oxidized through hydroxyl radicals. The H2O2/Fe2+ ratio was determined to be 0.51 under optimum conditions. At the end of the experiment, the maximum energy consumption was found to be 2.12 kWh per g COD. The FVP was completely mineralized in a very short time by the EF process, according to the LC-MS/MS examination. The EF process followed the pseudo first-order kinetic model with the rate constants of 0.023, 0.016 and 0.006 1/min for pH 2, 3 and 4, respectively. According to the findings of this study, the electro-Fenton process is an effective method for removing FVP from aqueous solutions. To the authors' knowledge, this is the first study to show the degradation and optimum conditions of FVP in aqueous solution using the electro-Fenton (EF) process.

Nanoplastics removal from spiked laundry wastewater using electro-peroxidation process

Microplastics and nanoplastics (NPs) in laundry wastewater (LWW) are major sources of plastic particles in wastewater treatment plants. Unlike microplastics, almost no information exists in the literature on the degradation of NPs in LWW. In this work, the degradation of NPs in commercial LWW by the electro-peroxidation process is investigated. The obtained results demonstrated that already existing ions in LWW such as Cl- contribute to faster degradation of NPs and a complete removal could be obtained as fast as 40 min. In addition, three-dimensional excitation and emission matrix fluorescence analysis was performed, which revealed humic acid-like, aromatic proteins-like, and fulvic acid-like compounds could be oxidized after 20, 40, and 60 min of treatment respectively. The effects of operating parameters on the process performance were then examined by response surface methodology (RSM) models. The results showed that initial TOC concentration was the most important parameter influencing negatively the percentage of NP degradation. Afterward, optimization of the process revealed that the energy consumption could be minimized at 31.2 mA/cm2, 0.025 mol/L [Na2SO4], and 52 min treatment time for 52.2 mg/L initial TOC. Finally, analysis of treated LWW showed no toxicity on Daphnia magna. This study showed that the electro-peroxidation process can completely degrade NPs in LWW without any remaining toxic compounds.

Potential application of a newly isolated microalga Desmodesmus sp. GXU-A4 for recycling Molasses vinasse

The development of cost-effective and energy-efficient technologies for the stabilization of organic wastewater by microalgae has been essential and sought after. In the current study, GXU-A4 was isolated from an aerobic tank treating molasses vinasse (MV) and identified as Desmodesmus sp. based on its morphology, rbcL, and ITS sequences. It exhibited good growth with a high lipid content and chemical oxygen demand (COD) when grown using MV and the anaerobic digestate of MV (ADMV) as the growth medium. Three distinct COD concentrations for wastewater were established. Accordingly, GXU-A4 removed more than 90% of the COD from molasses vinasse (MV1, MV2, and MV3) with initial COD concentrations of 1193 mgL^-1, 2100 mgL^-1, and 3180 mgL^-1, respectively. MV1 attained the highest COD and color removal rates of 92.48% and 64.63%, respectively, and accumulated 47.32% DW (dry weight) of lipids and 32.62% DW of carbohydrates, respectively. Moreover, GXU-A4 grew rapidly in anaerobic digestate of MV (ADMV1, ADMV2, and ADMV3) with initial COD concentrations of 1433 mgL^-1, 2567 mgL^-1, and 3293 mgL^-1, respectively. Under ADMV3 conditions, the highest biomass reached 13.81 g L^-1 and accumulated 27.43% DW of lipids and 38.70% DW of carbohydrates, respectively. Meanwhile, the removal rates of NH₄-N and chroma in ADMV3 reached 91.10% and 47.89%, respectively, significantly reducing the concentration of ammonia nitrogen and color in ADMV. Thus, the results demonstrate that GXU-A4 has a high fouling tolerance, a rapid growth rate in MV and ADMV, the ability to achieve biomass accumulation and nutrient removal from wastewater, and a high potential for MV recycling.

The transformation of dissolved organic matter and formation of halogenated by-products during electrochemical advanced oxidation pretreatment for shale gas produced water

Electrochemical advanced oxidation processes (EAOPs) have shown great potential for the treatment of shale gas produced water (SGPW). In this study, we investigated the transformation of dissolved organic matter (DOM) during EAOPs of SGPW and the formation of toxic halogenated by-products at various current densities, using fluorescence spectroscopy and Fourier transform ion cyclotron resonance mass spectrometry. We found that the priority of DOM removal was terrestrial humic-like > microbial humic-like > protein-like substances. Non-Halogenated organic compounds (non-HOCs) and HOCs were predominantly CHO, and CHOCl/CHOBr compounds in EAOP-treated SGPW, respectively. As applied current density and treatment time increased, the production of oxyhalides increased, with chlorate > bromate > perchlorate. Meanwhile, most DOM was mineralized, resulting in residual products with higher modified aromaticity index (AI_mod) and nominal oxidation state of carbon (NOSC). The resistants had lower mass-to-charge ratio (m/z), AI_mod, NOSC, and double bond equivalent minus oxygen per carbon ((DBE-O)/C). The dominant reactions were the addition of tri-oxygen and deallyl. Bromine addition dominated the reactions of halogenating addition, while chlorine addition took second place. Furthermore, the acute toxicity of SGPW was positively correlated with inorganic halogenated by-products. This study contributes to the understanding and improvement of EAOPs for the treatment of SGPW.

Fabrication and characterization of Ti/polyaniline-Co/PbO2-Co for efficient electrochemical degradation of cephalexin in secondary effluents

The traditional interlayer of PbO₂ electrode possessed many problems, such as short service lifetime and limited specific surface area. Herein, a novel and efficient Ti/polyaniline-Co/PbO₂-Co electrode was conctructed employing cyclic voltammetry to introduce a Co-doped polyaniline interlayer and anodic electrodeposition to synthetize a β-PbO₂-Co active layer. Compared with pristine PbO₂ electrode, Ti/polyaniline-Co/PbO₂-Co exhibited more compact crystalline shape and higher active sites amounts. Pratically, the electrochemical degradation of 5 mg L^-1 cephalexin in real secondary effluents was effectively achieved by the novel anode with 87.42% cephalexin removal and 71.8% COD mineralization after 120 min of 15 mA cm^-2 electrolysis. The hydroxyl radical production and electrochemical stability were increased by 3.16 and 3.27 times respectively. The cephalexin degradation pathway was investigated by combining a density functional theory-based theoretical approach and LC-QTrap-MS/MS. The most likely cleavage point of the β-lactam ring was the O=C-N bond, whose attack would produce small molecular compounds containing the thiazole and 4, 6-thiazine rings. Further oxidation produced inorganic ions; quantitative investigations indicated the amino groups to undergo decomposition to form aqueous NH₄⁺, which was further oxidized to NO₃^-. The accumulation of NO₃^- and SO₄^2-, combined with a decrease in toxicity toward Escherichia coli, demonstrated the efficient mineralization of cephalexin on the Ti/polyaniline-Co/PbO₂-Co electrode.

Immobilized Nanomaterials for Environmental Applications

Nanomaterials (NMs) have been extensively used in several environmental applications; however, their widespread dissemination at full scale is hindered by difficulties keeping them active in engineered systems. Thus, several strategies to immobilize NMs for their environmental utilization have been established and are described in the present review, emphasizing their role in the production of renewable energies, the removal of priority pollutants, as well as greenhouse gases, from industrial streams, by both biological and physicochemical processes. The challenges to optimize the application of immobilized NMs and the relevant research topics to consider in future research are also presented to encourage the scientific community to respond to current needs.

A critical review on paracetamol removal from different aqueous matrices by Fenton and Fenton-based processes, and their combined methods

Paracetamol (PCT), also known as acetaminophen, is a drug used to treat fever and mild to moderate pain. After consumption by animals and humans, it is excreted through the urine to the sewer systems, wastewater treatment plants, and other aquatic/natural environments. It has been detected in trace amounts in effluents of wastewater plant treatments, sewage sludge, hospital wastewaters, surface waters, and drinking water. PCT can cause genetic code damage, oxidative degradation of lipids, and denaturation of protein in cells, and its toxicity has been well-proven in bacteria, algae, macrophytes, protozoan, and fishes. To avoid its harmful health problems over living beings, powerful Fenton and Fenton-based treatments as pre-eminent advanced oxidation processes (AOPs) have been developed because of the inefficient treatment by conventional treatments. This paper presents a comprehensive and critical review over the application of such Fenton technologies to remove PCT from natural waters, synthetic wastewaters, and real wastewaters. The characteristics and main results obtained using Fenton, photo-Fenton, electro-Fenton, and photoelectro-Fenton are described, making special emphasis in the oxidative action of the generated reactive oxygen species. Hybrid processes based on the coupling with ultrasounds, gamma radiation, photocatalysis, photoelectrocatalysis, zero-valent iron-activated persulfate, adsorption, and microbial fuel cells, are analyzed. Sequential treatments involving the initiation with plasma gliding arc discharge and post-biological process are detailed. Comparative results with other available AOPs are also described and discussed. Finally, 13 aromatic by-products and 9 short-linear aliphatic carboxylic acid detected during the PCT removal by Fenton and Fenton-based processes are reported, with the proposal of three parallel pathways for its initial degradation.

Simultaneous recovery of nutrients and improving the biodegradability of waste algae hydrothermal liquid

The ever-increasing algae biomass due to eutrophication brings an enormous destruction and potential threat to the ecosystem. Hydrothermal carbonization (HTC) is a potential means converting algae to value added products such as sustainable bioenergy and biomaterials. However, the waste aqueous phase (AP) produced during the HTC of algae biomass needs to be treated carefully in case of the second pollution to environment. In this study, a model microbe (E. coli) was adopted for the microbial pretreatment of AP, by which the bioavailability of AP could be improved, and the nutrients could be reclaimed though struvite precipitation. Three-dimensional fluorescence spectra and GC-MS results illustrated that E. coli pretreatment could convert a large number of organic nitrogenous compounds to ammonia nitrogen by degrading aromatic protein substances and deaminating nitrogenous heterocyclic compounds. Afterwards, a serious of characterizations confirmed that 81.13% of ammonia nitrogen could be recovered as struvite though precipitation. Life cycle assessment indicates the cost of the two-step treatment process was much lower than that of conventional wastewater treatment processes, and is beneficial to environment. This work provides an environment-friendly strategy for the comprehensive utilization of algae, which may contribute to alleviating the algal disasters and bring certain economic benefits though algal treatment.

Construction of Novel Electro-Fenton Systems by Magnetically Decorating Zero-Valent Iron onto RuO2-IrO2/Ti Electrode for Highly Efficient Pharmaceutical Wastewater Treatment

The Electro-Fenton (E-Fenton) technique has shown great potential in wastewater treatment, while the sustainable and continuing supply of Fe2+ remains challenging. Herein, we demonstrate the construction of a novel E-Fenton system by magnetically decorating zero-valent iron (ZVI) onto a RuO2-IrO2/Ti (ZVI-RuO2-IrO2/Ti) electrode for high-efficient treatment of pharmaceutical wastewater, which is considerably refractory and harmful to conventional biological processes. By using ZVI as a durable source of Fe(II) irons, 78.69% of COD and 76.40% of TOC may be rapidly removed by the developed ZVI-RuO2-IrO2/Ti electrode, while the ZVI-RuO2-IrO2/Ti electrode using ZVI only reduces 35.64% of COD under optimized conditions at initial COD and TOC values of 5500 mg/L and 4300 mg/L, respectively. Moreover, the increase in BOD5/COD from 0.21 to 0.52 highlights the enhanced biodegradability of the treated effluent. The analysis of a simultaneously formed precipitation on electrodes suggests that the coagulation process dominated by Fe3+/Fe2+ also plays a non-negligible role in pharmaceutical wastewater treatment. In addition, the monitoring of the evolution of nitrogen elements and the formation of by-products in the E-Fenton process verifies its great capacity toward those organic pollutants found in pharmaceutical wastewater. Our study offers a practical solution for enhancing the performance of E-Fenton systems, and effectively treating refractory pharmaceutical wastewater.

Electrochemical degradation of nanoplastics in water: Analysis of the role of reactive oxygen species

Microplastics and nanoplastics (NPs) are emerging water contaminants which have recently gained lots of attention because of their effects on the aquatic systems and human life. Most of the previous works on the treatment of plastic pollution in water have been focused on microplastics and a very limited study has been performed on the NPs treatment. In this work, the role of main reactive oxygen species (ROSs) in the electrooxidation (EO) and electro-peroxidation (EO-H₂O₂) of NPs in water is investigated. In-situ generation of hydroxyl radicals (^•OH), persulfates (S₂O₈^2-), and hydrogen peroxide (H₂O₂) were performed using boron-doped diamond (BDD) as the anode, whereas titanium (in EO process) and carbon felt (CF, in EO-H₂O₂ process) were used as cathode. In the EO process, NPs were mainly oxidized by two types of ROSs on the BDD surface: (i) ^•OH from water discharge and (ii) SO₄^•- via S₂O₈^2- reaction with ^•OH. In EO-H₂O₂ process, NPs were additionally degraded by ^•OH formed from H₂O₂ decomposition as well as SO₄^•- generated from direct or indirect reactions with H₂O₂. Analysis of the degradation of NPs showed that EO-H₂O₂ process was around 2.6 times more effective than EO process. The optimum amount of NPs degradation efficiency of 86.8% was obtained using EO-H₂O₂ process at the current density of 36 mA·cm^-2, 0.03 M Na₂SO₄, pH of 2, and 40 min reaction time. In addition, 3D EEM fluorescence analysis confirmed the degradation of NPs. Finally, the economic analysis showed the treatment of NPs using EO-H₂O₂ process had an operating cost of 2.3 $US.m^-3, which was around 10 times less than the EO process. This study demonstrated that the in-situ generation of ROSs can significantly enhance the degradation of NPs in water.

Exploring the fate of dissolved organic matter at the molecular level in the reactive electrochemical ceramic membrane system using fluorescence spectroscopy and FT-ICR MS

This research evaluated the performance of reactive electrochemical ceramic membrane (REM) in treating secondary effluent and investigated the fate of dissolved organic matter (DOM) at the molecular level. The role of adsorption, electrosorption, and oxidation in DOM removal was comprehensively elucidated based on fluorescence spectroscopy and high-resolution mass spectrometry (FT-ICR MS). Among the fluorescence components (C1-C3) in secondary effluent, microbial humic-like C2 showed fewer adsorption on the REM surface without applying an electrical potential. The electrosorption helped an enhanced uptake of all DOM components and transformed them onto the electrode surface. The fluorescence components and all three fractions (hydrophilic, transphilic, and hydrophobic) were rapidly degraded, and finished water with stable DOM was obtained. The leading degradation phenomena were the change of the unsaturated compounds to the aliphatic and transformation of large-sized molecules to medium and small-sized ones. Above 70% of the compounds in the secondary effluent acted as precursors, which were mineralized/degraded and transformed products were found on the REM surface and in the finished water. The compounds containing sulfur (CHOS) were easily and preferably degraded/mineralized, followed by the compounds containing nitrogen (CHON) and CHO. The oxidation of DOM led to the extensive formation of organo-chlorinated compounds, which contributed above 80% in products. Overall, the combination of fluorescence spectroscopy and FT-ICR MS provided unique behavior of DOM in the secondary effluent toward electro-oxidation in the REM system. These findings could help explore the potential of REM for different water matrices to project the possible composition of DOM in the finished water.

Combined Electro-Fenton and Anodic Oxidation Processes at a Sub-Stoichiometric Titanium Oxide (Ti4O7) Ceramic Electrode for the Degradation of Tetracycline in Water

The mineralization of tetracycline by electrochemical advanced oxidation processes (EAOPs) as well as the study of the toxicity of its intermediates and degradation products are presented. Electro-Fenton (EF), anodic oxidation (AO), and electro-Fenton coupled with anodic oxidation (EF/AO) were used to degrade tetracycline on carbon felt (cathode) and a sub-stoichiometric titanium oxide (Ti4O7) layer deposited on Ti (anode). As compared to EF and AO, the coupled EF/AO system resulted in the highest pollutant removal efficiencies: total organic carbon removal was 69 ± 1% and 68 ± 1%, at 20 ppm and 50 ppm of initial concentration of tetracycline, respectively. The effect of electrolysis current on removal efficiency, mineralization current efficiency, energy consumption, and solution toxicity of tetracycline mineralization were investigated for 20 ppm and 50 ppm tetracycline. The EF/AO process using a Ti4O7 anode and CF cathode provides low energy and high removal efficiency of tetracycline caused by the production of hydroxyl radicals both at the surface of the non-active Ti4O7 electrode and in solution by the electro-Fenton process at the cathodic carbon felt. Complete removal of tetracycline was observed from HPLC data after 30 min at optimized conditions of 120 mA and 210 mA for 20 ppm and 50 ppm tetracycline concentrations. Degradation products were elucidated, and the toxicity of the products were measured with luminescence using Microtox® bacteria toxicity test.

A critical review on challenges and trend of ultrapure water production process

The recent and vigorous developments in semiconductor technology strictly request better quality and large quantity of ultrapure water (UPW) for their production. It is crucial to secure a large amount of raw water for the future development of UPW production. Using reclaimed water as alternative raw water source to produce UPW is therefore considered the feasible trend and solution for sustainable use of water resources towards a common future practice in UPW production. The challenge of using reclaimed water is due to its higher content of organic pollutants, especially small molecule organic pollutants such as urea, which are difficult to remove through traditional UPW production process. Consequently, improving the existing UPW production process to meet the water standard desired in the semiconductor industry is essential. This paper reviewed the current traditional processes for removing organic matters in UPW production, including ion-exchange (IX) adsorption, granular activated carbon (GAC) adsorption, reverse osmosis (RO) and ultraviolet (UV) irradiation. The potential problems in the actual UPW production process were identified when using reclaimed water as raw water source. A new strategy of applying the advanced oxidation process (AOPs) to UPW production as a supplementary unit to guarantee UPW quality was proposed. Its feasibility and research focus were then analyzed and discussed in obtaining a new solution for a future development of the UPW production process.

Photo-assisted electrochemical advanced oxidation processes for the disinfection of aqueous solutions: A review

Disinfection is usually the final step in water treatment and its effectiveness is of paramount importance in ensuring public health. Chlorination, ultraviolet (UV) irradiation and ozone (O3) are currently the most common methods for water disinfection; however, the generation of toxic by-products and the non-remnant effect of UV and O3 still constitute major drawbacks. Photo-assisted electrochemical advanced oxidation processes (EAOPs) on the other hand, appear as a potentially effective option for water disinfection. In these processes, the synergism between electrochemically produced active species and photo-generated radicals, improve their performance when compared with the corresponding separate processes and with other physical or chemical approaches. In photo-assisted EAOPs the inactivation of pathogens takes place by means of mechanisms that occur at different distances from the anode, that is: (i) directly at the electrode's surface (direct oxidation), (ii) at the anode's vicinity by means of electrochemically generated hydroxyl radical species (quasi-direct), (iii) or at the bulk solution (away from the electrode surface) by photo-electrogenerated active species (indirect oxidation). This review addresses state of the art reports concerning the inactivation of pathogens in water by means of photo-assisted EAOPs such as photo-electrocatalytic process, photo-assisted electrochemical oxidation, photo-electrocoagulation and cathodic processes. By focusing on the oxidation mechanism, it was found that while quasi-direct oxidation is the preponderant inactivation mechanism, the photo-electrocatalytic process using semiconductor materials is the most studied method as revealed by numerous reports in the literature. Advantages, disadvantages, trends and perspectives for water disinfection in photo-assisted EAOPs are also analyzed in this work.

Substoichiometric titanium oxide Ti2O3 exhibits greater efficiency in enhancing hydrolysis of 1,1,2,2-tetrachloroethane than TiO2 nanomaterials

Oxygen-deficient substoichiometric titanium oxides, or "titanium suboxides," are produced incidentally from coal combustion and are environmentally abundant. Additionally, titanium suboxide nanomaterials are promising new materials with likely future environmental release. How these materials may affect contaminant fate differently than stoichiometric TiO₂ (nano)materials is largely unknown. Here, we show that Ti₂O₃ (selected as a model titanium suboxide) exhibits significantly greater efficiency in enhancing the hydrolysis of 1,1,2,2-tetrachloroethane (TeCA), a common groundwater contaminant, than the stoichiometric anatase and rutile TiO₂. At environmentally relevant pH (6.5-7.5), the surface area-normalized pseudo-first-order hydrolysis rate constant in the presence of Ti₂O₃ is approximately an order of magnitude higher than those associated with TiO₂. The superior catalytic efficiency of Ti₂O₃ can be attributed to both its higher surface hydrophobicity, which renders higher adsorption affinity for TeCA, and its higher concentration of Lewis acid sites (mainly the Ti³⁺ and the five-coordinated Ti⁴⁺). Particularly, the deprotonated hydroxyl groups attached to Ti³⁺ (a weaker Lewis acid than Ti⁴⁺) exhibit higher basicity and thus, are more effective in catalyzing the base-promoted hydrolysis reaction. The findings call for further understanding of the environmental implications of titanium suboxide (nano)materials, which may not be readily predictable based on the knowledge acquired for TiO₂.

Electro-kinetic washing of a soil contaminated with quinclorac and subsequent electro-oxidation of wash water

This work deals with the remediation of a soil that has been enriched with Quinclorac (QNC), one of the herbicides most used in Chile for weed control in rice fields. Quinclorac damages the microflora and macrofauna of soils and is toxic to some susceptible crops, which results in economic loses during crop rotation. Furthermore, Quinclorac a potential contaminant of water resources and soils, given its high mobility and persistence. This has created the need to lower its concentrations in soils intensively cultivated. In this study, an electro-kinetic soil washing system (EKSW) for mobilizing this pesticide in the soil was explored. The performance of this technology was compared by assessing the effect of direct (DP) and reverse (RP) polarity during 15 days under potentiostatic conditions and applying an electric field of 1 V cm^-1 between electrodes. Among the main results, the highest removal of QNC was obtained through the EKSW-RP process, which also contributed to the prevention of acidity and alkaline fronts in the soil, compared to the EKSW-DP system. In both cases, the highest accumulation of QNC occurred in the cathodic well by mobilizing the non-ionized contaminant through the electroosmotic flow (EOF) from anode to cathode. After the treatment with EKSW, the wash water accumulated in the anodic and cathodic wells, which contained an important concentration of pesticide, was subjected to electro-oxidation (EO) by applying different current densities (j). The high generation of •OH on the surface of a boron-doped diamond electrode (BDD) allowed for the complete degradation and mineralization of QNC and its major intermediate compounds to CO₂. The results of this study show that the application of both coupled stages in this type of remediation technologies would enable the removal of QNC from the soil without altering its chemical and physical properties, constituting an environmentally friendly process.