SERS imaging investigation of the removal efficiency of pesticide on vegetable leaves by using different surfactants

Pesticide residues on vegetables could be removed by commercial detergents to guarantee food safety, but the removal efficiencies of different formulations of detergents need to be further investigated. In this work, surface enhanced Raman scattering (SERS) imaging method due to its good space resolution as well as high sensitivity is used to track the thiram residue, and evaluate the pesticide removing efficiencies by mixtures of several surfactants at different ratios. Sodium linear alkylbenzene sulphonate-alkyl glycoside (LAS-APG) with the ratio at 5:5 and the concentration at 0.2 % show the best removing effect. In addition, HPLC method is employed to validate the results of SERS imaging. Furthermore, LAS-APG mixture could be efficiently washed out from the leaves through simple household cleaning, meaning no secondary contamination. It is perspective that SERS imaging is an effective technique to explore the effect of fruit and vegetable detergents in removing pesticide residues.

Graphene-based nanomaterials as potential candidates for environmental mitigation of pesticides

Over the years, bioaccumulation of hazardous chemicals in the food chain has become a critical issue, resulting in numerous health risks. Environmental mitigation aims to clean up contaminated sites and eliminate hazardous materials from the air, water, or soil to restore the site to its original and safe condition. Pesticides constitute one of the most dangerous environmental pollutants which are generally used to increase crop production. Addressing the removal or treatment of pesticides has become pivotal in mitigating environmental threats. Diverse remediation methods are employed to protect the environment and public health. Graphene-based materials have emerged as promising candidates with exceptional properties, including excellent adsorption capacity due to their high surface area, strong hydrophilicity, and tunable properties. Owing to these properties, they have been attracting major research attention in the field of design and fabrication of materials for the mitigation of pesticides from the environment such as from contaminated food, water and other samples. Various physical, chemical and biological extraction techniques are adopted to remove pesticides. This review article provides an insight into the potential role of graphene-based materials in the environmental remediation of pesticides. We have focused on the removal of Organophosphates, Organochlorines, Carbamates and Pyrethroids present in water, fruit, vegetable and other samples, highlighting the urgent need for environmental remediation. While graphene-based materials hold potential for pesticide remediation, addressing challenges in scalable production, assessing long-term sustainability, and mitigating potential environmental impacts are critical steps for successful large-scale applications.

Taguchi optimisation of the synthesis of vine-pruning-waste hydrochar as potential adsorbent for pesticides in water

This research aimed to synthesise an effective hydrochar adsorbent from vineyard pruning wastes to remove emerging contaminants as a potential valorisation product. The adsorption capacity of the hydrochar was optimised using the Taguchi method. Four synthesis variables were evaluated: hydrothermal reaction temperature, use of H3PO4 as a catalyst, number of acetone washes, and type of chemical cold activation. The simultaneous adsorption of five model pesticides (clothianidin (CTD), acetamiprid (ACE), 2,4-D, metalaxyl (MET), and atrazine (ATZ)) at an initial pH of 7 was studied. At optimum conditions, the hydrochar presented a total adsorption capacity of 22.7 μmol/g, representing a 2.7-fold improvement with respect to pristine hydrochar performance. High percentage removals were achieved for all pollutants (85 % CTD, 94 % ACE, 86 % MET, and 95 % ATZ) except for 2,4-D (4 %). This research provides a valuable reference for developing hydrochar adsorbents for pollution control and the valorisation of biomass wastes.

Harnessing the potential of microalgae-based systems for mitigating pesticide pollution and its impact on their metabolism

Due to increased pesticide usage in agriculture, a significant concentration of pesticides is reported in the environment that can directly impact humans, aquatic flora, and fauna. Utilizing microalgae-based systems for pesticide removal is becoming more popular because of their environmentally friendly nature, ability to degrade pesticide molecules into simpler, nontoxic molecules, and cost-effectiveness of the technology. Thus, this review focused on the efficiency, mechanisms, and factors governing pesticide removal using microalgae-based systems and their effect on microalgal metabolism. A wide range of pesticides, like atrazine, cypermethrin, malathion, trichlorfon, thiacloprid, etc., can be effectively removed by different microalgal strains. Some species of Chlorella, Chlamydomonas, Scenedesmus, Nostoc, etc., are documented for >90% removal of different pesticides, mainly through the biodegradation mechanism. The antioxidant enzymes such as ascorbate peroxidase, superoxide dismutase, and catalase, as well as the complex structure of microalgae cell walls, are mainly involved in eliminating pesticides and are also crucial for the defense mechanism of microalgae against reactive oxygen species. However, higher pesticide concentrations may alter the biochemical composition and gene expression associated with microalgal growth and metabolism, which may vary depending on the type of strain, the pesticide type, and the concentration. The final section of this review discussed the challenges and prospects of how microalgae can become a successful tool to remediate pesticides.

Effect of rice milling, washing, and cooking on reducing pesticide residues

The effects of milling, washing, and cooking on etofenprox, flubendiamide, and tebufenozide levels in brown and polished rice were investigated by HPLC using a UV detector. The reduction rates of etofenprox, flubendiamide, and tebufenozide after milling were 68.74-93.16%, 64.49-90.25%, and 69.74-92.58%, respectively, 11.64-41.44%, 31.36-65.37%, and 31.61-73.79%, respectively, after washing brown rice, and 30.85-82.08%, 52.13-83.05%, and 43.04-83.89%, respectively, after washing polished rice. The residue levels of the three pesticides in brown rice decreased after electric and pressure cooking by 56.49 and 54.41%, 75.80 and 73.42%, and 70.01 and 71.27%, respectively, and the corresponding levels in polished rice decreased after electric and pressure cooking by 85.58 and 85.82%, 86.70 and 87.06%, and 89.89 and 89.68%, respectively. In conclusion, various processing methods decrease the residual levels of etofenprox, flubendiamide, and tebufenozide in rice.

Facile synthesis of novel magnesium oxide nanoparticles for pesticide sorption from water

The quantum of pesticides in surface as well as drinking water has become a serious health hazard. In this experiment, magnesium oxide nanoparticles (MgO NPs) were synthesized using leaves of purple-colored rice variety (Crossa) and utilized for simultaneous removal of three pesticides, namely, thiamethoxam, chlorpyriphos, and fenpropathrin from water. The biogenic MgO NPs were characterized using SEM-EDX, FTIR, XRD, DLS, etc. The optimum synthesis parameters (1 M NaOH, 80 °C, and 2 h) resulted in maximum yield of MgO NPs (87.7 mg), minimum hydrodynamic diameter (35.12 nm), poly dispersity index (0.14) and mean zeta potential (-11 mV). Sorption data of the three pesticides fitted well with non-linear Langmuir and Freundlich isotherm models and non-linear pseudo-second-order kinetic model. The maximum adsorption capacity of MgO NPs for the three pesticides was 87.66 µg/mg, as obtained from the Langmuir isotherm model. Under optimum conditions (initial concentration, 40 mg/L; dose, 30 mg/30 mL; and pH, 9), 60.13, 80.53, and 92.49% removal of thiamethoxam, chlorpyriphos, and fenpropathrin was achieved with a 100% desirability, respectively. Thus, the biogenic MgO NPs could be an efficient adsorbent of pesticides and could be recommended for pesticide decontamination in water treatment plants and domestic water purifier systems.

Removal of fenamiphos, imidacloprid, and oxamyl pesticides from water by microalgal Nannochloropsis oculata biomass and their determination by validated HPLC method

The present study assessed the removal of fenamiphos, imidacloprid, and oxamyl pesticides from water using algal Nannochloropsis oculata biomass. Several factors, such as algal biomass concentration, incubation time, and pesticide concentration, were studied for their impact on pesticide removal. Analysis and quantification of pesticides by rapid HPLC have been developed and validated. The optimum conditions were obtained at 15 min, 50 mg/L of pesticide concentration, and 4,500 mg/L of the algal biomass with 92.24% and 90.43% removal for fenamiphos and imidacloprid, respectively. While optimum parameters of 10 min incubation, 250 mg/L of pesticide concentration, and 2,750 mg/L of the algal biomass exhibited 67.34% removal for oxamyl. N. oculata, marine microalgae, successively removed different concentrations of the tested pesticides from water, and the algal biomass showed a potential reduction of pesticides in polluted water samples.

Membrane technology for pesticide removal from aquatic environment: Status quo and way forward

The noxious side effects of pesticides on human health and environment have prompted the search of effective and reliable treatment techniques for pesticide removal. The removal of pesticides can be accomplished through physical, chemical and biologicals. Physical approaches such as filtration and adsorption are prevailing pesticide removal strategies on account of their effectiveness and ease of operation. Membrane-based filtration technology has been recognized as a promising water and wastewater treatment approach that can be used for a wide range of organic micropollutants including pesticides. Nanofiltration (NF), reverse osmosis (RO) and forward osmosis (FO) have been increasingly explored for pesticide removal from aquatic environment owing to their versatility and high treatment efficiencies. This review looks into the remedial strategies of pesticides from aqueous environment using membrane-based processes. The potentials and applications of three prevailing membrane processes, namely NF, RO and FO for the treatment of pesticide-containing wastewater are discussed in terms of the development of advanced membranes, separation mechanisms and system design. The challenges in regards to the practical implementation of membrane-based processes for pesticide remediation are identified. The corresponding research directions and way forward are highlighted. An in depth understanding of the pesticide nature, water chemistry and the pesticide-membrane interactions is the key to achieving high pesticide removal efficiency. The integration of membrane technology and conventional removal technologies represents a new dimension and the future direction for the treatment of wastewater containing recalcitrant pesticides.

Adsorption and removal of organophosphorus pesticides from Chinese cabbages and green onions by using metal organic frameworks based on the mussel-inspired adhesive interface

Based on the mussel-inspired adhesive interface (Fe₃O₄-g-C₃N₄@PDA), a novel bionic metal-organic framework (Fe₃O₄-g-C₃N₄-PDA@MIL-101) was successfully prepared. The composite featured a high specific surface area and a multi-microchannel structure, as well as strong thermochemical stability. The structural property of Fe₃O₄-g-C₃N₄-PDA@MIL-101(Fe) was characterized, and the results indicated that Fe₃O₄, PDA, and MIL-101(Fe) were uniformly coated on the g-C₃N₄ surface. The adsorption and desorption of organophosphorus pesticides with Fe₃O₄-g-C₃N₄-PDA@MIL-101(Fe) were evaluated by batch experiments. This composite showed high adsorption efficiency and selective removal of coralox, phosalone, and chlorpyrifos. Under the optimal conditions, three organophosphorus pesticides were adsorbed from Chinese cabbage and green onion samples with Fe₃O₄-g-C₃N₄-PDA@MIL-101(Fe). The analytical method exhibited high sensitivity (LOD, 0.19-2.34 μg/L; LOQ, 0.65-7.82 μg/L), excellent practicality, and good stability, suggesting that Fe₃O₄-g-C₃N₄-PDA@MIL-101 was an ideal candidate magnetic adsorbent for the removal of organophosphorus pesticides in Chinese cabbage and green onion samples.

Viscose-derived activated carbons as adsorbents for malathion, dimethoate, and chlorpyrifos-screening, trends, and analysis

The release and accumulation of pesticides in the environment require the development of novel sustainable technologies for their removal. While adsorption is a classical approach, the design of new materials with enhanced adsorption properties could rationalize the remediation routes and decrease potential risks for their non-target organisms, including humans. More importantly, the use of adsorbents and their synthesis should be implemented in a sustainable and environmentally friendly manner. In this contribution, we studied the adsorption of organophosphorus pesticides (OPs) dimethoate, malathion, and chlorpyrifos on viscose fiber-derived activated carbon fibers (ACFs). The most efficient adsorption was found for chlorpyrifos, followed by malathion and dimethoate, while material properties were correlated with OP uptake. These ACFs are extremely efficient for chlorpyrifos adsorption, with experimentally observed adsorption capacitances reaching 240 mg g^-1. Detailed analysis suggests that chlorpyrifos is physisorbed on ACF surfaces and that increased surface hydrophilicity reduces the uptake. Studied ACFs have great potential for practical application. They can reduce OPs' concentrations to such levels that no acute neurotoxic effects of the studied OPs in spiked tap water samples are seen, even for starting concentrations up to 10⁴ times higher than the allowed ones. Finally, this study presents possible guidance for developing even more efficient and environmentally friendly adsorbents for chlorpyrifos, the most toxic among studied OPs.

Performance of electro-Fenton process coupling with microbial fuel cell for simultaneous removal of herbicide mesotrione

The aim of this work was to investigate the performance of electro-Fenton process coupling with microbial fuel cell for removal of herbicide mesotrione. After a six months acclimation, the anodic biofilm exhibited stable degradation ability to herbicide mesotrione, and the bioelectricity generated by the anodic biofilm could be utilized to in-situ generate H₂O₂ in cathode. Under the optimized conditions, the mesotrione removal rates reached 0.83 mg L^-1h^-1 for anodic microbial degradation and 1.39 mg L^-1h^-1 for cathodic Fenton oxidation, respectively. The bacteria possessing functions of compounds degradation (e.g. Petrimonas, Desulfovibrio, and Mycobacterium) and electrons transfer (e.g. Petrimonas, Cloacibacillus, and Azospirillum) were selectively enriched in anodic biofilm. Therefore, with the advantages of pollutant removal by simultaneous microbial degradation and Fenton oxidation, the MFC-Fenton offer a promising and sustainable approach for wastewater treatment and refractory contaminants elimination.

Activated carbon derived from waste tangerine seed for the high-performance adsorption of carbamate pesticides from water and plant

This research presents the tangerine seed activated carbon (TSAC), obtained from food waste (tangerine seed) by one-step pyrolysis method and applied to remove carbamate pesticides (CMs) from complex solutions. The effects of carbonization temperature and time on adsorption performance were studied. Structural properties of TSAC were determined by Fourier Transform Infrared Spectrometer, X-ray diffraction analysis, Raman spectroscopy, scanning electron microscope and nitrogen adsorption/desorption methods and compared with that of tangerine seed. The TSAC exhibited a specific surface area of 659.62 m²/g, a total pore volume of 0.6203 cc/g and a pore diameter of 1.410 nm. The influences of initial pesticide concentration, adsorption temperature and contact time were investigated through batch experiments. Pseudo-second-order kinetic model and Langmuir isotherm model were more suitable for CMs adsorption process onto TSAC. Furthermore, the thermodynamic research indicated that this adsorption process was spontaneous and exothermic.

A novel hybrid concept for implementation in drinking water treatment targets micropollutant removal by combining membrane filtration with biodegradation

Groundwater extracted for drinking water production is commonly treated by aeration and sand filtration. However, this simple treatment is typically unable to remove pesticide residues. As a solution, bioaugmentation of sand filter units (i.e., the addition of specific degrader strains) has been proposed as an alternative "green" technology for targeted pesticide removal. However, the introduced degraders are challenged by (i) micropollutant levels of target residue, (ii) the oligotrophic environment and (iii) competition and predation by the native microorganisms, leading to loss of population and degradation potential. To overcome these challenges, we propose the introduction of a novel hybrid treatment step to the overall treatment process in which reverse osmosis filtration and biodegradation are combined to remove a target micropollutant. Here, the reverse osmosis produces a concentrated retentate that will act as a feed to a dedicated biofilter unit, intended to promote biodegradation potential and stability of an introduced degrader. Subsequently, the purified retentate will be re-mixed with the permeate from reverse osmosis, for re-mineralization and downstream consumption. In our study, we investigated the effect of reverse osmosis retentates on the degradation potential of an introduced degrader. This paper provides the first promising results of this hybrid concept using the 2,6-dichlorobenzamide (BAM)-degrading bacteria Aminobacter sp. MSH1 in batch experiments, spiked with radiolabeled BAM. The results showed an increased degradation potential of MSH1 in retentate waters versus untreated water. Colony-forming units and qPCR showed a stable MSH1 population, despite higher concentrations of salts and metals, and increased growth of native bacteria.

Degradation of carbendazim in water via photo-Fenton in Raceway Pond Reactor: assessment of acute toxicity and transformation products

This study aimed at investigating the degradation of fungicide carbendazim (CBZ) via photo-Fenton reactions in artificially and solar irradiated photoreactors at laboratory scale and in a semi-pilot scale Raceway Pond Reactor (RPR), respectively. Acute toxicity was monitored by assessing the sensibility of bioluminescent bacteria (Aliivibrio fischeri) to samples taken during reactions. In addition, by-products formed during solar photo-Fenton were identified by liquid chromatography coupled to mass spectrometry (UFLC-MS). For tests performed in lab-scale, two artificial irradiation sources were compared (UV_{λ > 254nm} and UV-Vis_{λ > 320nm}). A complete design of experiments was performed in the semi-pilot scale RPR in order to optimize reaction conditions (Fe²⁺ and H₂O₂ concentrations, and water depth). Efficient degradation of carbendazim (> 96%) and toxicity removal were achieved via artificially irradiated photo-Fenton under both irradiation sources. Control experiments (UV photolysis and UV-Vis peroxidation) were also efficient but led to increased acute toxicity. In addition, H₂O₂/UV_{λ > 254nm} required longer reaction time (60 minutes) when compared to the photo-Fenton process (less than 1 min). While Fenton's reagent achieved high CBZ and acute toxicity removal, its efficiency demands higher concentration of reagents in comparison to irradiated processes. Solar photo-Fenton removed carbendazim within 15 min of reaction (96%, 0.75 kJ L^-1), and monocarbomethoxyguanidine, benzimidazole isocyanate, and 2-aminobenzimidazole were identified as transformation products. Results suggest that both solar photo-Fenton and artificially irradiated systems are promising routes for carbendazim degradation.

Optimization of a laccase-mediator system with natural redox-mediating compounds for pesticide removal

This study proposed the optimization of a laccase-mediator system to reduce pesticide levels (bentazone, carbofuran, diuron, clomazone, tebuconazole, and pyraclostrobin) on aqueous medium. Firstly, the mediator concentration of 1 mM was established (average removal of 36%). After that, seven redox-mediating compounds, namely, 2,20-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt, caffeic acid, chlorogenic acid, p-coumaric acid, ferulic acid, gallic acid, protocatechuic acid, and vanillin, were compared regarding their removal efficiency. The highest removal (77%) was achieved with the laccase-vanillin system. After this screening, the optimization was carried out by a 2² full factorial design. Variables under study were the enzyme (laccase) activity and vanillin concentration. Maximum removal (53-85%) was achieved with 0.95 U/mL laccase and 1.8 mM vanillin. Pesticide removal in reaction media was fitted to the first-order kinetics equation with an average half-time life of 2.2 h. This is the first study of the use of this natural compound as a mediator in the degradation of the pesticides under investigation. The results of this study contribute, with alternative methods, to decrease pesticide levels since they are highly persistent in aqueous samples and, as a result, mitigate the environmental impact.

Removal enactment of organo-phosphorous pesticide using bacteria isolated from domestic sewage

Three bacteria (MS I, II and III) i.e., Pseudomonas aeruginosa (KY781886), Enterobactor ludwigii (KX881423) and Enterobacter cloacae (KX881513) isolated from domestic sewage were identified on the basis of 16S rDNA sequencing and are capable to growth in the presence of organo-phosphorous pesticide (chlorpyrifos). The mega plasmid size >23 kb was found in MS I and III. Biosurfactants of the significant amount were produced by three isolates. The ability of the isolates to degrade pesticide over 3 days in the presence of pesticides containing chlorpyrifos as the active component was estimated. Results of UV-visible, FTIR spectroscopy and GC-MS studies confirmed the removal of chlorpyrifos rather than degradation. Pesticide uptake results showed chlorpyrifos in intracellular components and bound to the cell surface in its native state. Removal of pesticide from soil was also recorded by these bacteria. Microbial treated pesticide did not have any effect on Vigna radita seedlings and goat erythrocytes.

Interaction of pesticides with natural and synthetic solids. Evaluation in dynamic and equilibrium conditions

Interactions between pesticides (paraquat, glyphosate, 2,4-D, atrazine, and metsulfuron methyl) and soil organic and inorganic components have been studied in batch experiments by performing adsorption, dissolution, and chemical and photochemical degradation under different conditions. The obtained results confirm that the affinity of a pesticide to the solid surface depends on the nature of both and shows that each reactant strongly affects the mobility of the other one, e.g., anionic pesticides promote the dissolution of the solid humic acid but if this last is retained into the inorganic matrix enhances the adsorption of a cationic pesticide. Adsorption also seems to protect the bonded specie to be chemical degraded, such as shown in two pesticide/clay systems at constant pH. The use of mesoporous silicas could result in a good alternative for pesticide remediation. In fact, the solid shows high adsorption capacity towards paraquat and its modification with TiO₂ nanoparticles increases not only the pesticide adsorption but also seems to catalyze its degradation under UV light to less-toxic metabolites. UV-VIS spectroscopy was relevant and novel in such sense. Electrostatic interactions, hydrogen and coordinative bonds formations, surface complexations and hydrophobic associations play a key role in the fate of mentioned pesticides on soil and ground/surface water environments.

Removal of pesticides from white and red wines by microfiltration

The aim of this work is the investigation of microfiltration in removing pesticides from a white and a red Greek wine. Six membranes with pore size 0.45μm were investigated. Two mixtures of 23 and 9 pesticides, and single pesticide solutions were added in the wine. The pesticides tested belong to 11 chemical groups. Solid phase extraction (SPE) followed by gas chromatography (GC) with electron capture detector (ECD) were performed to analyze pesticide residues of the filtered fortified wine. Distinct behavior was exhibited by each membrane. Cellulose acetate and cellulose nitrate showed higher mean pesticide removal for both wines, followed by polyethersulfone, regenerated cellulose, and polyamides. The filtration effectiveness was correlated to the membrane type and to the pesticide chemical structure and properties (octanol-water partition coefficient, water solubility) and compared for the wines tested. In most cases, the more hydrophobic pesticides (pyrethroids and aldrin) showed higher removal from red wine than white wine. Adsorption on membranes was increased by increasing hydrophobicity and decreasing hydrophilicity of organic pesticide molecule. The removal of each pesticide from its single solution was generally higher than that from its mixtures, allowing the estimation of the antagonistic and synergistic effects of pesticides in the mixtures.

Characterization of sorption processes for the development of low-cost pesticide decontamination techniques

The adsorption/desorption behavior of four pesticides (atrazine, alachlor, endosulfan sulfate and trifluralin) in aqueous solutions onto four adsorbents (sunflower seed shells, rice husk, composted sewage sludge and soil) was investigated. Pesticide determination was carried out using stir bar sorptive extraction and gas chromatography coupled with mass spectroscopy. Maximum removal efficiency (73.9%) was reached using 1 g of rice husk and 50 mL of pesticide solution (200 μg L(-1)). The pseudo adsorption equilibrium was reached with 0.6 g organic residue, which was used in subsequent experiments. The pseudo-first-order, pseudo-second-order kinetics and the intra-particle diffusion models were used to describe the kinetic data and rate constants were evaluated. The first model was more suitable for the sorption of atrazine and alachlor while the pseudo-second-order best described endosulfan sulfate and trifluralin adsorption, which showed the fastest sorption rates. 4h was considered as the equilibrium time for determining adsorption isotherms. Experimental data were modeled by Langmuir and Freundlich models. In most of the studied cases both models can describe the adsorption process, although the Freundlich model was applicable in all cases. The sorption capacity increased with the hydrophobic character of the pesticides and decreased with their water solubility. Rice husk was revealed as the best adsorbent for three of the four studied pesticides (atrazine, alachlor and endosulfan sulfate), while better results were obtained with composted sewage sludge and sunflower seed shell for the removal of trifluralin. Although desorption percentages were not high (with the exception of alachlor, which reached a desorption rate of 57%), the Kfd values were lower than the Kf values for adsorption and all H values were below 100, indicating that the adsorption was weak.