Biodegradability of di-(2-ethylhexyl) phthalate by a newly isolated bacterium Achromobacter sp. RX

Tracing the influence of seasonal variation on bioaccumulation and trophodynamics of phthalate esters (PAEs) in marine food web: A case study in Bohai Bay, North China

The ubiquity of phthalate esters (PAEs) leads to public concerns about the safety of seafood consumption. However, their bioaccumulation and trophodynamics in marine food webs remain unclear, especially in different seasons. Herein, we collected 18 species (n = 135) in summer and 17 species (n = 146) in winter from Bohai Bay (BHB). ∑6PAEs in organisms in summer were significantly higher than those in winter. Di-(2-ethylhexyl) phthalate (DEHP) was the predominant PAE with a mean of 1112 ng·g-1 lipid weight (lw) and 375 ng·g-1 lw in summer and winter, respectively. The bioaccumulation factors (BAFs) and biota-sediment accumulation factors (BSAFs) of DEHP in summer were significantly higher than those in winter. A parabolic relationship was found between log Kow and log BAFlw or BSAFlw of PAEs. Food webs in two seasons were constructed based on the δ15N of each organism. Except for diethyl phthalate (DEP), other PAEs underwent biodilution and the biodilution of these PAEs was more obvious in summer compared to winter. Non-carcinogenic risks of 6 PAEs were negligible, but DEHP could pose incremental lifetime carcinogenic risks in some marine samples, especially in summer. This study provides insights into the seasonal variation of bioaccumulation and trophodynamics of PAEs.

Characteristics and functional bacteria of an efficient benzocaine-mineralizing bacterial consortium

The extensive use of pharmaceutical and personal care products (PPCPs) has led to widespread residual pollution, which increases the risk of the development of drug resistance in pathogenic microorganisms. Benzocaine is a PPCP that is widely used medical anesthesia and in sunscreen. Microorganisms are essential for the degradation of residual PPCPs. However, no studies have reported the microbial degradation of benzocaine. In this study, through continuous enrichment of the initial consortium HJ1, the highly efficient benzocaine-degrading consortium HJ7 was obtained, HJ7 exhibited a degradation rate that was 1.92 times greater than that of HJ1. Methyl 4-aminobenzoate and 4-aminobenzoic acid were identified as major intermediate products during benzocaine biodegradation by consortium HJ1 or HJ7. Methylobacillus (57.8 % ± 0.9 %) and Pseudomonas (22.1 % ± 0.7 %), which are thought to harbor essential species for benzocaine degradation, were significantly enriched in consortium HJ7. Two benzocaine-degrading strains, Pseudomonas sp. A8 and Microbacterium sp. A741, and one methyl 4-aminobenzoate-degrading strain, Achromobacter sp. A5, were isolated from consortium HJ7, and they synergistically mineralized benzocaine. These findings not only provide new insights into the biotransformation of benzocaine but also provide strain resources for the bioremediation of residual benzocaine in the environment.

A novel and efficient strategy for the biodegradation of di(2-ethylhexyl) phthalate by Fusarium culmorum

Di(2-ethylhexyl) phthalate (DEHP) is a plasticizer that is used worldwide and raises concerns because of its prevalence in the environment and potential toxicity. Herein, the capability of Fusarium culmorum to degrade a high concentration (3 g/L) of DEHP as the sole carbon and energy source in solid-state fermentation (SSF) was studied. Cultures grown on glucose were used as controls. The biodegradation of DEHP by F. culmorum reached 96.9% within 312 h. This fungus produced a 3-fold higher esterase activity in DEHP-supplemented cultures than in control cultures (1288.9 and 443.2 U/L, respectively). In DEHP-supplemented cultures, nine bands with esterase activity (24.6, 31.2, 34.2, 39.5, 42.8, 62.1, 74.5, 134.5, and 214.5 kDa) were observed by zymography, which were different from those in control cultures and from those previously reported for cultures grown in submerged fermentation. This is the first study to report the DEHP biodegradation pathway by a microorganism grown in SSF. The study findings uncovered a novel biodegradation strategy by which high concentrations of DEHP could be biodegraded using two alternative pathways simultaneously. F. culmorum has an outstanding capability to efficiently degrade DEHP by inducing esterase production, representing an ecologically promising alternative for the development of environmental biotechnologies, which might help mitigate the negative impacts of environmental contamination by this phthalate. KEY POINTS: • F. culmorum has potential to tolerate and remove di(2-ethylhexyl) phthalate (DEHP) • Solid-state fermentation is an efficient system for DEHP degradation by F. culmorum • High concentrations of DEHP induce high levels of esterase production by F. culmorum.

Engineering bacterial biocatalysts for the degradation of phthalic acid esters

Phthalic acid esters (PAEs) are synthetic diesters derived from o-phthalic acid, commonly used as plasticizers. These compounds pose significant environmental and health risks due to their ability to leach into the environment and act as endocrine disruptors, carcinogens, and mutagens. Consequently, PAEs are now considered major emerging contaminants and priority pollutants. Microbial degradation, primarily by bacteria and fungi, offers a promising method for PAEs bioremediation. This article highlights the current state of microbial PAEs degradation, focusing on the major bottlenecks and associated challenges. These include the identification of novel and more efficient PAE hydrolases to address the complexity of PAE mixtures in the environment, understanding PAEs uptake mechanisms, characterizing novel o-phthalate degradation pathways, and studying the regulatory network that controls the expression of PAE degradation genes. Future research directions include mitigating the impact of PAEs on health and ecosystems, developing biosensors for monitoring and measuring bioavailable PAEs concentrations, and valorizing these residues into other products of industrial interest, among others.

Microbial degradation of contaminants of emerging concern: metabolic, genetic and omics insights for enhanced bioremediation

The perpetual release of natural/synthetic pollutants into the environment poses major risks to ecological balance and human health. Amongst these, contaminants of emerging concern (CECs) are characterized by their recent introduction/detection in various niches, thereby causing significant hazards and necessitating their removal. Pharmaceuticals, plasticizers, cyanotoxins and emerging pesticides are major groups of CECs that are highly toxic and found to occur in various compartments of the biosphere. The sources of these compounds can be multipartite including industrial discharge, improper disposal, excretion of unmetabolized residues, eutrophication etc., while their fate and persistence are determined by factors such as physico-chemical properties, environmental conditions, biodegradability and hydrological factors. The resultant exposure of these compounds to microbiota has imposed a selection pressure and resulted in evolution of metabolic pathways for their biotransformation and/or utilization as sole source of carbon and energy. Such microbial degradation phenotype can be exploited to clean-up CECs from the environment, offering a cost-effective and eco-friendly alternative to abiotic methods of removal, thereby mitigating their toxicity. However, efficient bioprocess development for bioremediation strategies requires extensive understanding of individual components such as pathway gene clusters, proteins/enzymes, metabolites and associated regulatory mechanisms. "Omics" and "Meta-omics" techniques aid in providing crucial insights into the complex interactions and functions of these components as well as microbial community, enabling more effective and targeted bioremediation. Aside from natural isolates, metabolic engineering approaches employ the application of genetic engineering to enhance metabolic diversity and degradation rates. The integration of omics data will further aid in developing systemic-level bioremediation and metabolic engineering strategies, thereby optimising the clean-up process. This review describes bacterial catabolic pathways, genetics, and application of omics and metabolic engineering for bioremediation of four major groups of CECs: pharmaceuticals, plasticizers, cyanotoxins, and emerging pesticides.

Whole-cell biocatalysis for phthalate esters biodegradation in wastewater by a saline soil bacteria SSB-consortium

Phthalic acid esters (PAE) are widely used as plasticizers and have been classified as ubiquitous environmental contaminants of primary concern. PAE have accumulated intensively in surface water, groundwater, and wastewaters; thus, PAE degradation is essential. In the present study, the ability of a saline soil bacteria (SSB)-consortium to degrade synthetic wastewater-phthalates with alkyl chains of different lengths, such as diethyl phthalate (DEP), di-n-butyl phthalate (DBP), benzyl butyl phthalate (BBP), and di (2-ethylhexyl) phthalate (DEHP) was characterized. A central composite design-response surface methodology was applied to optimize the degradation of each phthalate, where the independent variables were temperature (21-41 °C), pH (5.3-8.6) and PAE concentration (79.5-920.4 mg L-1), and Gas Chromatography-Mass Spectrometry was used to identify the metabolites generated during phthalate degradation. Optimal conditions were 31 °C, pH 7.0, and an initial PAE concentration of 500 mg L-1, where the SSB-consortium removed 84.9%, 98.47%, 99.09% and 98.25% of initial DEP, DBP, BBP, and DEHP, respectively, in 168h. A first-order kinetic model explained - the biodegradation progression, while the half-life of PAE degradation ranged from 12.8 to 29.8 h. Genera distribution of the SSB-consortium was determined by bacterial meta-taxonomic analysis. Serratia, Methylobacillus, Acrhomobacter, and Pseudomonas were the predominant genera; however, the type of phthalate directly affected their distribution. Scanning electron microscopy analysis showed that high concentrations (1000 mg L-1) of phthalates induced morphological alterations in the bacterial SSB-consortium. The metabolite profiling showed that DEP, DBP, BBP, and DEHP could be fully metabolized through the de-esterification and β-oxidation pathways. Therefore, the SSB-consortium can be considered a potential candidate for bioremediation of complex phthalate-contaminated water resources.

Mechanisms of synthetic bacterial flora YJ-1 to enhance cucumber resistance under combined phthalate-disease stresses

Biotic and abiotic stresses have emerged as major constraints to agricultural production, causing irreversible adverse impacts on agricultural production systems and thus posing a threat to food security. In this study, a new strain of Bacillus subtilis DNYB-S1 was isolated from soil contaminated with Fusarium wilt. It was found that artificially synthetic flora (YJ-1) [Enterobacter sp. DNB-S2 and Rhodococcus pyridinovorans DNHP-S2, DNYB-S1] could effectively mitigate both biotic (Fusarium wilt) and abiotic (phthalates) sources of stresses, with the inhibition rate of YJ-1 resistant to wilt being 71.25% and synergistic degradation of 500 mg/L PAEs was 91.23%. The adaptive difference of YJ-1 was 0.59 and the ecological niche overlap value was -0.05 as determined by Lotka-Volterra modeling. These results indicate that YJ-1 has good ecological stability. The major degradation intermediates included 2-ethylhexyl benzoate (EHBA), phthalic acid (PA), diisobutyl phthalate (DIBP), and butyl benzoate, suggesting that YJ-1 can provide a more efficient pathway for PAEs degradation. In addition, there was metabolic mutualism among the strains that will selectively utilize the provided carbon source (some metabolites of PAEs) for growth. The pot experiment showed that YJ-1 with cucumber reduced the incidence of cucumber wilt by 45.31%. YJ-1 could reduce the concentration of PAEs (DBP: DEHP = 1:1) in soil species from 30 mg/kg to 4.26 mg/kg within 35 d, with a degradation efficiency of 85.81%. Meanwhile, the concentration of PAEs in cucumber was reduced to 0.01 mg/kg, indicating that YJ-1 is directly involved in the degradation of soil PAEs and the enhancement of plant immunity. In conclusion, this study provides a new perspective for the development of customized microbiomes for phytoremediation under combined biotic-abiotic stresses in agricultural production processes.

Enhanced degradation of phthalate esters (PAEs) by biochar-sodium alginate immobilised Rhodococcus sp. KLW-1

In this study, a new strain of bacteria, named Rhodococcus sp. KLW-1, was isolated from farmland soil contaminated by plastic mulch for more than 30 years. To improve the application performance of free bacteria and find more ways to use waste biochar, KLW-1 was immobilised on waste biochar by sodium alginate embedding method to prepare immobilised pellet. Response Surface Method (RSM) predicted that under optimal conditions (3% sodium alginate, 2% biochar and 4% CaCl2), di (2-ethylhexyl) phthalate (DEHP) degradation efficiency of 90.48% can be achieved. Under the adverse environmental conditions of pH 5 and 9, immobilisation increased the degradation efficiency of 100 mg/L DEHP by 16.42% and 11.48% respectively, and under the high-stress condition of 500 mg/L DEHP concentration, immobilisation increased the degradation efficiency from 71.52% to 91.56%, making the immobilised pellets have strong stability and impact load resistance to environmental stress. In addition, immobilisation also enhanced the degradation efficiency of several phthalate esters (PAEs) widely existing in the environment. After four cycles of utilisation, the immobilised particles maintained stable degradation efficiency for different PAEs. Therefore, immobilised pellets have great application potential for the remediation of the actual environment.

Innovative Microbial Immobilization Strategy for Di-n-Butyl Phthalate Biodegradation Using Biochar-Calcium Alginate-Waterborne Polyurethane Composites

Di-n-butyl phthalate (DBP) is a prevalent phthalate ester widely used as a plasticizer, leading to its widespread presence in various environmental matrices. This study presents an innovative microbial immobilization strategy utilizing biochar, calcium alginate (alginate-Ca, (C12H14CaO12)n), and waterborne polyurethane (WPU) composites to enhance the biodegradation efficiency of DBP. The results revealed that rice husk biochar, pyrolyzed at 300 °C, exhibits relatively safer and more stable physical and chemical properties, making it an effective immobilization matrix. Additionally, the optimal cultural conditions for Bacillus aquimaris in DBP biodegradation were identified as incubation at 30 °C and pH 7, with the supplementation of 0.15 g of yeast extract, 0.0625 g of glucose, and 1 CMC of Triton X-100. Algal biotoxicity results indicated a significant decrease in biotoxicity, as evidenced by an increase in chlorophyll a content in Chlorella vulgaris following DBP removal from the culture medium. Finally, microbial community analysis demonstrated that encapsulating B. aquimaris within alginate-Ca and WPU layers not only enhanced DBP degradation, but also prevented ecological competition from indigenous microorganisms. This novel approach showcases the potential of agricultural waste utilization and microbial immobilization techniques for the remediation of DBP-contaminated environments.

Biodegradation of polystyrene nanoplastics by Achromobacter xylosoxidans M9 offers a mealworm gut-derived solution for plastic pollution

Nanoplastics pose significant environmental problems due to their high mobility and increased toxicity. These particles can cause infertility and inflammation in aquatic organisms, disrupt microbial signaling and act as pollutants carrier. Despite extensive studies on their harmful impact on living organisms, the microbial degradation of nanoplastics is still under research. This study investigated the degradation of nanoplastics by isolating bacteria from the gut microbiome of Tenebrio molitor larvae fed various plastic diets. Five bacterial strains capable of degrading polystyrene were identified, with Achromobacter xylosoxidans M9 showing significant nanoplastic degradation abilities. Within 6 days, this strain reduced nanoplastic particle size by 92.3%, as confirmed by SEM and TEM analyses, and altered the chemical composition of the nanoplastics, indicating a potential for enhanced bioremediation strategies. The strain also caused a 7% weight loss in polystyrene film over 30 days, demonstrating its efficiency in degrading nanoplastics faster than polystyrene film. These findings might enhance plastic bioremediation strategies.

Biodegradation of chloroxylenol by an aerobic enrichment consortium and a newly identified Rhodococcus strain

Chloroxylenol is a commonly used antimicrobial agent in antibacterial and disinfection products, which has been detected in various environments, such as wastewater treatment plants, rivers, seawater, and even drinking water, with concentrations ranging from ng/L to mg/L. However, the biodegradation of chloroxylenol received limited attention with only sporadic reports available so far. In this study, an efficient chloroxylenol-degrading consortium, which could degrade 20 mg/L chloroxylenol within two days, was obtained after five months of enrichment. Amplicon sequencing analysis revealed a decrease in the α-diversity (e.g., Shannon index and Inv_Simpson index) of the community during the domestication process. Microbial community dynamics were uncovered, with sequences affiliated to Achromobacter, Pseudomonas, and Rhodococcus identified as the most abundant taxonomic groups. From the consortium, five pure isolates were obtained; however, it was found that only one strain of Rhodococcus could degrade chloroxylenol. Strain Rhodococcus sp. DMU2021 could degrade chloroxylenol efficiently under the conditions of temperature 30-40 °C, and neutral/alkaline conditions. Chloroxylenol was toxic to strain DMU2021 and triggered both enzymatic and non-enzymatic antioxidant systems in response. This study provides novel insights into the biodegradation process of chloroxylenol, as well as valuable bioresources for bioremediation.

A Novel and Efficient Phthalate Hydrolase from Acinetobacter sp. LUNF3: Molecular Cloning, Characterization and Catalytic Mechanism

Phthalic acid esters (PAEs), which are widespread environmental contaminants, can be efficiently biodegraded, mediated by enzymes such as hydrolases. Despite great advances in the characterization of PAE hydrolases, which are the most important enzymes in the process of PAE degradation, their molecular catalytic mechanism has rarely been systematically investigated. Acinetobacter sp. LUNF3, which was isolated from contaminated soil in this study, demonstrated excellent PAE degradation at 30 °C and pH 5.0-11.0. After sequencing and annotating the complete genome, the gene dphAN1, encoding a novel putative PAE hydrolase, was identified with the conserved motifs catalytic triad (Ser201-Asp295-His325) and oxyanion hole (H127GGG130). DphAN1 can hydrolyze DEP (diethyl phthalate), DBP (dibutyl phthalate) and BBP (benzyl butyl phthalate). The high activity of DphAN1 was observed under a wide range of temperature (10-40 °C) and pH (6.0-9.0). Moreover, the metal ions (Fe2+, Mn2+, Cr2+ and Fe3+) and surfactant TritonX-100 significantly activated DphAN1, indicating a high adaptability and tolerance of DphAN1 to these chemicals. Molecular docking revealed the catalytic triad, oxyanion hole and other residues involved in binding DBP. The mutation of these residues reduced the activity of DphAN1, confirming their interaction with DBP. These results shed light on the catalytic mechanism of DphAN1 and may contribute to protein structural modification to improve catalytic efficiency in environment remediation.

Anti-Klebsiella pneumoniae activity of secondary metabolism of Achromobacter from the intestine of Periplaneta americana

BACKGROUND

Klebsiella pneumoniae is one of the main pathogens of clinical isolation and nosocomial infections, as K. pneumoniae show broad-spectrum resistance to β-lactam and carbapenem antibiotics. It is emerging clinical need for a safe and effective drug to anti-K. pneumoniae. At present, Achromobacter mainly focused on its degradation of petroleum hydrocarbons, polycyclic aromatic hydrocarbons, assisting insects to decompose, degrade heavy metals and utilize organic matter, but there were few reports on the antibacterial activity of the secondary metabolites of Achromobacter.

RESULTS

In this study, a strain WA5-4-31 from the intestinal tract of Periplaneta americana exhibited strong activity against K. Pneumoniae through preliminary screening. The strain was determined to be Achromobacter sp. through the morphological characteristics, genotyping and phylogenetic tree analysis, which is homologous to Achromobacter ruhlandii by 99%, its accession numbe in GenBank at National Center for Biotechnology Information (NCBI) is MN007235, and its deposit number was GDMCC NO.1.2520. Six compounds (Actinomycin D, Actinomycin X2, Collismycin A, Citrinin, Neoechinulin A and Cytochalasin E) were isolated and determined by activity tracking, chemical separation, nuclear magnetic resonance (NMR) and mass spectrometry (MS) analysis. Among them, Actinomycin D, Actinomycin X2, Collismycin A, Citrinin and Cytochalasin E showed a good effect on anti-K. pneumoniae, with MIC values of 16-64 µg/mL.

CONCLUSIONS

The study reported Achromobacter, which was from the intestinal tract of Periplaneta americana with the activity against K. Pneumoniae, can produce antibacterial compounds for the first time. It lays the foundation for development of secondary metabolites of insect intestinal microorganisms.

Phthalate esters: occurrence, toxicity, bioremediation, and advanced oxidation processes

Phthalic acid esters are emerging pollutants, commonly used as plasticizers that are categorized as hazardous endocrine-disrupting chemicals (EDCs). A rise in anthropogenic activities leads to an increase in phthalate concentration in the environment which leads to various adverse environmental effects and health issues in humans and other aquatic organisms. This paper gives an overview of the research related to phthalate ester contamination and degradation methods by conducting a bibliometric analysis with VOS Viewer. Ecotoxicity analysis requires an understanding of the current status of phthalate pollution, health impacts, exposure routes, and their sources. This review covers five toxic phthalates, occurrences in the aquatic environment, toxicity studies, biodegradation studies, and degradation pathways. It highlights the various advanced oxidation processes like photocatalysis, Fenton processes, ozonation, sonolysis, and modified AOPs used for phthalate removal from the environment.

Molecular evaluation of the metabolism of estrogenic di(2-ethylhexyl) phthalate in Mycolicibacterium sp

BACKGROUND

Di(2-ethylhexyl) phthalate (DEHP) is a widely detected plasticizer and a priority pollutant of utmost concern for its adverse impact on humans, wildlife and the environment. To eliminate such toxic burden, biological processes are the most promising ways to combat rampant environmental insults under eco-friendly conditions. The present study investigated the biochemical and molecular assessment of the catabolic potential of Mycolicibacterium sp. strain MBM in the assimilation of estrogenic DEHP.

RESULTS

A detailed biochemical study revealed an initial hydrolytic pathway of degradation for DEHP followed by the assimilation of hydrolyzed phthalic acid and 2-ethylhexanol to TCA cycle intermediates. Besides the inducible nature of DEHP-catabolic enzymes, strain MBM can efficiently utilize various low- and high-molecular-weight phthalate diesters and can grow under moderately halotolerant conditions. Whole genome sequence analysis exhibited a genome size of 6.2 Mb with a GC content of 66.51% containing 6,878 coding sequences, including multiple genes, annotated as relevant to the catabolism of phthalic acid esters (PAEs). Substantiating the annotated genes through transcriptome assessment followed by RT-qPCR analysis, the possible roles of upregulated genes/gene clusters in the metabolism of DEHP were revealed, reinforcing the biochemical pathway of degradation at the molecular level.

CONCLUSIONS

A detailed co-relation of biochemical, genomic, transcriptomic and RT-qPCR analyses highlights the PAE-degrading catabolic machineries in strain MBM. Further, due to functional attributes in the salinity range of both freshwater and seawater, strain MBM may find use as a suitable candidate in the bioremediation of PAEs.

Global Situation of Bioremediation of Leachate-Contaminated Soils by Treatment with Microorganisms: A Systematic Review

This systematic review presents the current state of research in the last five years on contaminants in soils, especially in leachates from solid waste landfills, with emphasis on biological remediation. In this work, the pollutants that can be treated by microorganisms and the results obtained worldwide were studied. All the data obtained were compiled, integrated, and analyzed by soil type, pollutant type, bacterial type, and the countries where these studies were carried out. This review provides reliable data on the contamination of soils worldwide, especially soils contaminated by leachate from municipal landfills. The extent of contamination, treatment objectives, site characteristics, cost, type of microorganisms to be used, and time must be considered when selecting a viable remediation strategy. The results of this study can help develop innovative and applicable methods for evaluating the overall contamination of soil with different contaminants and soil types. These findings can help develop innovative, applicable, and economically feasible methods for the sustainable management of contaminated soils, whether from landfill leachate or other soil types, to reduce or eliminate risk to the environment and human health, and to achieve greater greenery and functionality on the planet.

Effects of fertilizer application on phthalate ester pollution and the soil microbial community in plastic-shed soil on long-term fertilizer experiment

Due to the use of agricultural film, the pollution of phthalate esters (PAEs) in plastic-shed soils has attracted increasing attention. In this study, we used watermelon as a planting system and investigated the effects of organic fertilizer and chemical fertilizer application on the degradation of PAEs by evaluating soil nutrients and soil bacterial communities in plastic-shed soil. The dibutyl phthalate (DBP) concentration in the organic fertilizer soil was only 58.2% in the zero-fertilization control (CK) soil, but the concentrations of monohexyl phthalate (MEHP) and mono-n-butyl ester (MBP), the metabolites of PAEs, were found to be higher. The concentration of MBP is ten times that of DBP. The results showed that fertilization, especially the application of organic fertilizers, had a significant effect on the degradation of PAEs. There were specific biomarkers in different fertilization treatments. Among the microbiome community, Planifilum had the highest relative abundance in the organic fertilizer (OF) soil, and the highest proportion of Thermodesulfovibrionia was detected in the chemical fertilizer (CF) soil. These biomarkers were significantly correlated with PAEs and their metabolites. The relative abundance of Thermomonosporaceae was significantly positively correlated with DBP. Planifilum and Thermaerobacter, which significantly increased in organic fertilizer soil, showed a significant negative correlation with DBP and a significant positive correlation with MBP. The relative abundances of Planifilum and Geobacillus were elevated in the OF soil and may be able to co-metabolize soil nitrogen and PAEs. PAEs and their metabolites in soils had significant effects on soil microbes, as did the soil nutrients including available phosphorus (AP), alkali-hydrolysable nitrogen (Alkali-N), and organic matter (OM). Our research provides scientific support for the use of fertilizers to reduce PAE contamination but also warns of the potential risks of PAE metabolites.

Analysis of the performance of the efficient di-(2-ethylhexyl) phthalate-degrading bacterium Rhodococcus pyridinovorans DNHP-S2 and associated catabolic pathways

The widespread use of plastic has led to the global occurrence of phthalate esters (PAEs) pollution. PAEs can be effectively removed from polluted environments by microbe-mediated degradation. Di-(2-ethylhexyl) phthalate (DEHP) has the highest residual concentration in agricultural soil-contaminated areas compared to other PAEs in most of China. The Rhodococcus pyridinovorans DNHP-S2 microbial isolate identified was found to efficiently degrade DEHP. Within a 72 h period, the bacteria were able to degrade 52.47% and 99.75% of 500 mg L^-1 DEHP at 10 °C and 35 °C, respectively. Dimethyl phthalate (DMP) was first identified as an intermediate metabolite of DEHP, which is different from the previously reported DEHP catabolic pathway. Genomic sequencing of DNHP-S2 identified benzoate 1,2-dioxygenase and catechol 2,3/1,2-dioxygenase as potential mediators of DEHP degradation, consistent with the existence of two downstream metabolic pathways governing DEHP degradation. Three targets DEHP metabolism-related enzymes were found to be DEHP-inducible at the mRNA level, and DNHP-S2 was able to mediate the complete degradation of DEHP at lower temperatures, as confirmed via RT-qPCR. DNHP-S2 was also found to readily break down other PAEs including DMP, di-n-butyl phthalate (DBP), di-n-octyl phthalate (DnOP), and n-butyl benzyl phthalate (BBP). Together, these results thus highlight DNHP-S2 as a bacterial strain with great promise as a tool for the remediation of PAE pollution. In addition to providing new germplasm and genetic resources for use in the context of PAE degradation, these results also offer new insight into the potential mechanisms whereby PAEs undergo catabolic degradation, making them well-suited for use in PAE-contaminated environments.

The nitrogen cycle and mitigation strategies for nitrogen loss during organic waste composting: A review

Composting is a promising technology to decompose organic waste into humus-like high-quality compost, which can be used as organic fertilizer. However, greenhouse gases (N₂O, CO₂, CH₄) and odorous emissions (H₂S, NH₃) are major concerns as secondary pollutants, which may pose adverse environmental and health effects. During the composting process, nitrogen cycle plays an important role to the compost quality. This review aimed to (1) summarizes the nitrogen cycle of the composting, (2) examine the operational parameters, microbial activities, functions of enzymes and genes affecting the nitrogen cycle, and (3) discuss mitigation strategies for nitrogen loss. Operational parameters such as moisture, oxygen content, temperature, C/N ratio and pH play an essential role in the nitrogen cycle, and adjusting them is the most straightforward method to reduce nitrogen loss. Also, nitrification and denitrification are the most crucial processes of the nitrogen cycle, which strongly affect microbial community dynamics. The ammonia-oxidizing bacteria or archaea (AOB/AOA) and the nitrite-oxidizing bacteria (NOB), and heterotrophic and autotrophic denitrifiers play a vital role in nitrification and denitrification with the involvement of ammonia monooxygenase (amoA) gene, nitrate reductase genes (narG), and nitrous oxide reductase (nosZ). Furthermore, adding additives such as struvite salts (MgNH₄PO₄·6H₂O), biochar, and zeolites (clinoptilolite), and microbial inoculation, namely Bacillus cereus (ammonium strain), Pseudomonas donghuensis (nitrite strain), and Bacillus licheniformis (nitrogen fixer) can help control nitrogen loss. This review summarized critical issues of the nitrogen cycle and nitrogen loss in order to help future composting research with regard to compost quality and air pollution/odor control.

Phthalate Esters Metabolic Strain Gordonia sp. GZ-YC7, a Potential Soil Degrader for High Concentration Di-(2-ethylhexyl) Phthalate

As commonly used chemical plasticizers in plastic products, phthalate esters have become a serious ubiquitous environmental pollutant, such as in soil of plastic film mulch culture. Microbial degradation or transformation was regarded as a suitable strategy to solve the phthalate esters pollution. Thus, a new phthalate esters degrading strain Gordonia sp. GZ-YC7 was isolated in this study, which exhibited the highest di-(2-ethylhexyl) phthalate degradation efficiency under 1000 mg/L and the strongest tolerance to 4000 mg/L. The comparative genomic analysis results showed that there exist diverse esterases for various phthalate esters such as di-(2-ethylhexyl) phthalate and dibutyl phthalate in Gordonia sp. GZ-YC7. This genome characteristic possibly contributes to its broad substrate spectrum, high degrading efficiency, and high tolerance to phthalate esters. Gordonia sp. GZ-YC7 has potential for the bioremediation of phthalate esters in polluted soil environments.

Enhanced effects of walnut green husk solution on the phytoextraction of soil Cd and Zn and corresponding microbial responses

Walnut green husk (WGH) is a common agricultural waste, but it may be conducive to phytoremediation of heavy metals owing to its abundant phenolic hydroxyl, carboxyl, and other functional groups. In this study, WGH solution was used as an enhancer in the phytoextraction process via Sedum plumbizincicola, a hyperaccumulator of Zn and Cd. Microbial responses in the soil and plants were seamlessly analyzed to determine the underlying mechanisms of heavy metal extraction in this process. The results showed that the addition of 0.05 g/mL WGH solution increased the accumulation of Cd (by 153%) and Zn (by 220%) in plants as well as the availabilities of Cd (by 29.46%) and Zn (by 9.71%) in the soil, which can be attributed to an increase in the relative abundance of plant growth-promoting rhizobacteria that benefit phytoextraction. Furthermore, co-occurrence network analysis indicated the keystone taxa in the microbial community. Particularly, one of the keystone taxa, Pseudomonas, was also identified as distinct taxon in soil, and it was dominant among the endophytic bacteria. These results indicated that Pseudomonas, a taxon responded to WGH solution, may play a key role in enhanced phytoextraction in both soil and plant root. These results help to a better understanding of the microbial mechanisms for heavy metal accumulation in hyperaccumulator.

Complete Genome Sequence of Achromobacter Strain ES-001, a Betaproteobacterium Associated with a Cellulolytic Soil Community

The genome sequence of the soilborne bacterium Achromobacter strain ES-001, assembled from Illumina NextSeq and Nanopore MinION reads, is rich in genes predicted to encode iron, arsenic, and hydrocarbon metabolism, as well as type 6 secretion components. The sequenced genome will aid in determining the roles of noncellulolytic species in cellulose-enriched environments.

Biotechnology-based microbial degradation of plastic additives

Plastic additives are agents responsible to the flame resistance, durability, microbial resistance, and flexibility of plastic products. High demand for production and use of plastic additives is associated with environmental accumulation and various health hazards. One of the suitable methods of depleting plastic additive in the environment is bioremediation as it offers cost-efficiency, convenience, and sustainability. Microbial activity is one of the effective ways of detoxifying various compounds as microorganisms can adapt in an environment with high prevalence of pollutants. The present review discusses the use and abundance of these plastic additives, their health-related risks, the microorganisms capable of degrading them, the proposed mechanism of biodegradation, and current innovations capable of improving the efficiency of bioremediation.

Biodegradation of endocrine disrupting chemicals benzyl butyl phthalate and dimethyl phthalate by Bacillus marisflavi RR014

AIM

The objectives of the present study were to explore the benzyl butyl phthalate (BBP) and dimethyl phthalate (DMP) degradation potential of Bacillus marisflavi RR014 isolated from the tap water of public toilet and also to optimize the phthalates degradation process using response surface methodology.

METHODS AND RESULTS

The minimal salt medium was used for the biodegradation analysis of phthalates. The quantification of phthalates and their intermediate metabolites identification were done by using UHPLC and LC-MS/MS respectively. The results revealed that B. marisflavi RR014 is capable of degrading both the phthalates under varying pH, temperature and salinity conditions. The formation of phthalic acid from the breakdown of BBP and DMP (500 mg l^-1 ) in the medium was observed after 24 h. After 72 h, 61% of BBP and 98·9% of DMP in the medium was degraded as monitored by UHPLC. The identification of intermediate metabolites by LC-MS/MS revealed that hydrolysis of BBP and DMP produces phthalic acid.

CONCLUSIONS

The degradation rate of both the phthalates was increased as the parameters increased up to an optimum level. The three environmental factors (pH, temperature and salt concentration) strongly affect the rate of degradation of both the phthalates. The maximum degradation rate for both the phthalates was achieved at pH 7, temperature 35°C and salt concentration of 1% as observed from the central composite experimental design.

SIGNIFICANCE AND IMPACT OF THE STUDY

It is the first report on the phthalates biodegradation potential of B. marisflavi RR014 isolated from the tap water of public toilet. The bacterium is capable of degrading BBP and DMP under varying pH, temperature and salinity, therefore, ideal to treat the phthalate contaminated environments.

Bacterial community progression during food waste composting containing high dioctyl terephthalate (DOTP) concentration

The overall dioctyl terephthalate (DOTP) degradation efficiency during food waste composting was 98%. The thermophilic phases contributed to 76% of the overall degradation efficiency, followed by the maturation phase (22%), then the mesophilic phase (0.7%). The thermophilic phase had the highest specific degradation rate of 0.149 d^-1. The progression of the bacterial community during the composting process was investigated to understand DOTP biodegradation. The results showed that the bacterial richness and the alpha diversity of the DOTP composting were similar to a typical composting process, indicating that the high concentration of DOTP did not hinder the thriving and evolution of the bacterial community. Additionally, Firmicutes was the most dominant at the phylum level, followed by Proteobacteria and Bacteroidetes. Bacilli was the most dominant class (70%) in the mesophilic phase, with the abundance decreasing thereafter in the thermophilic and maturation phase. Moreover, Lactobacillus sp. was the dominant species at the beginning of the experiment, which was probably responsible for DOTP biodegradation. The high removal efficiency observed in the maturation phase indicates that degradation occurs in all the composting phases, and that compost can be used to enhance natural attenuation. These findings provide a better understanding of the bacterial communities during biodegradation of DOTP and plasticizers via food waste composting and should facilitate the development of appropriate green bioremediation technologies.