An AFM-IR study on surface properties of nano-TiO2 coated polyethylene (PE) thin film as influenced by photocatalytic aging process

TiO2-sodium alginate core-shell nanosystem for higher antimicrobial wound healing application

Wounds that are not properly managed can cause complications. Prompt and proper care is essential, to prevent microbial infection. Growing interest in metal oxide nanoparticles (NPs) for innovative wound treatments targeting healing and microbial infections. In this research, sodium alginate-coated titanium dioxide (TiSA) NPs are synthesized through a green co-precipitation method, combining inorganic TiO2 (Titanium dioxide) and SA (sodium alginate). Analysis via XRD and TEM revealed that the resulting TiSA NPs possessed an anatase phase and polygonal structure, respectively. Biomedical investigations demonstrated that TiSA NPs exhibited enhanced antimicrobial activity compared to the positive control, as well as its counterparts, and showed higher wound healing capabilities compared to TiO2 NPs. The antimicrobial effectiveness of TiSA NPs relied on various physicochemical factors, including small particle size, an altered band gap, and the presence of oxygen vacancies, resulting in microbial cell death. Moreover, TiSA NPs treatment demonstrated higher wound healing activity (98 ± 1.09 %) compared to its counterparts after 24 h of incubation. Assessment of cytotoxicity on healthy fibroblast cells (L929) revealed that TiSA NPs exhibited lower toxicity compared to TiO2 NPs. These findings support the potential of TiSA NPs as promising agents for antimicrobial activity and wound healing.

Are we underestimating stormwater? Stormwater as a significant source of microplastics in surface waters

Stormwater represent a critical pathway for transporting microplastics (MPs) to surface waters. Due to complex dynamics of MPs in stormwater, its dispersion, weathering, risk, and transport are poorly understood. This review bridges those gaps by summarizing the latest findings on sources, abundance, characteristics, and dynamics involved in stormwater MP pollution. Weathering starts before or after MPs enter stormwater and is more pronounced on land due to continuous heat and mechanical stress. Land use patterns, rainfall intensity, MPs size and density, and drainage characteristics influence the transport of MPs in stormwater. Tire and road wear particles (TRWPs), littering, and road dust are major sources of MPs in stormwater. The concentrations of MPs varies from 0.38-197,000 particles/L globally. Further MP concentrations showed regional variations, highlighting the importance of local monitoring efforts needed to understand local pollution sources. We observed unique signatures associated with the shape and color of MPs. Fibers and fragments were widely reported, with transparent and black being the predominant colors. We conclude that the contribution of stormwater to MP pollution in surface waters is significantly greater than wastewater treatment plant effluents and demands immediate attention. Field and lab scale studies are needed to understand its behavior in stormwater and the risk posed to the downstream water bodies.

Highly Efficient and Reusable PI/TiO2 Organic-Inorganic Microfibers for Sustainable Photocatalytic Degradation of Multiple Organic Pollutants under Simulated Sunlight

Herein, a series of polyimide (PI)/titanium dioxide (TiO2) organic-inorganic flexible composite microfibers with high photocatalytic performance and good reusability were prepared by combining electrospinning technology and a hydrothermal method. Under simulated sunlight, the photocatalytic characteristics of the as-prepared PI nanofibers, TiO2 nanorods, and PI/TiO2 microfibers were evaluated with photocatalytic degradation of Rhodamine B (RhB) solution. Among the tested samples, PI/TiO2-3 mL hydrochloric acid-160 °C-14 h (PI/TiO-3-160-14) (100%) exhibited a superior photocatalytic degradation rate compared to pure PI (84.0%) and TiO2 (62.2%). The enhancement of the photocatalytic performance was attributed to the Z-scheme heterojunction mechanism. When the interface was irradiated by simulated sunlight, the band edge bending, built-in electric field, and Coulomb interaction synergistically facilitated the separation and transport of electron-hole pairs in the heterojunction. This enhanced the oxidation and reduction abilities of the valence and conduction bands of PI/TiO2. These results were adequately verified by X-ray photoelectron spectroscopy (XPS) analyses and radical trapping experiments. Additionally, PI/TiO2 microfibers also demonstrated excellent photocatalytic activity toward methylene blue (MB, 81.4%), methyl orange (MO, 95.9%), and malachite green (KG, 98.9%), underscoring the versatile applicability of PI/TiO2. Further supplementary investigations illustrated that PI/TiO2 microfibers also possess excellent photostability during our extensive recycling photocatalytic experiments.

Interactions between microplastics and contaminants: A review focusing on the effect of aging process

Microplastics (MPs) in the environment are a major global concern due to their persistent nature and wide distribution. The aging of MPs is influenced by several processes including photodegradation, thermal degradation, biodegradation and mechanical fragmentation, which affect their interaction with contaminants. This comprehensive review aims to summarize the aging process of MPs and the factors that impact their aging, and to discuss the effects of aging on the interaction of MPs with contaminants. A range of characterization methods that can effectively elucidate the mechanistic processes of these interactions are outlined. The rate and extent of MPs aging are influenced by their physicochemical properties and other environmental factors, which ultimately affect the adsorption and aggregation of aged MPs with environmental contaminants. Pollutants such as heavy metals, organic matter and microorganisms have a tendency to accumulate on MPs through adsorption and the interactions between them impact their environmental behavior. Aging enhances the specific surface area and oxygen-containing functional groups of MPs, thereby affecting the mechanism of interaction between MPs and contaminants. To obtain a more comprehensive understanding of how aging affects the interactions, this review also provides an overview of the mechanisms by which MPs interact with contaminants. In the future, there should be further in-depth studies of the potential hazards of aged MPs in different environments e.g., soil, sediment, aquatic environment, and effects of their interaction with environmental pollutants on human health and ecology.

Photocatalytic degradation of different types of microplastics by TiOx/ZnO tetrapod photocatalysts

We investigated the use of titania coated ZnO tetrapods for photocatalytic degradation of two common types of microplastics, namely polyethylene (PE) microparticles and polyester (PES) microfibers. We found that the plastics morphology affects the rate of degradation, and that the use of electron scavengers is needed to maintain the reactivity of the photocatalysts over a prolonged period of time. Complete mass loss of PE and PES is achieved under UV illumination for 480 h and 624 h, respectively. In addition to pristine microplastics, the degradation of environmental microplastics sample (consisting primarily of polypropylene) was also demonstrated, though in this case longer degradation time (∼816 h) was needed to achieve complete mass loss of the samples.

Aging rate, environmental risk and production efficiency of the low-density polyethylene (LDPE) films with contrasting thickness in irrigated region

Physical thickness of low-density polyethylene (LDPE) films might determine the release rate of phthalic acid esters (PAEs) & structural integrity and affect production efficiency. However, this critical issue is still unclear and little reported. Aging effects were evaluated in LDPE films with the thickness of 0.006, 0.008, 0.010 and 0.015 mm in a maize field of irrigation region. The Scanning electron microscope (SEM) results showed that the proportion of damaged area (Dam) to total area of LDPE films was massively lowered with increasing thickness after aging. The highest and lowest Dam was 32.2% and 3.5% in 0.006 and 0.015 mm films respectively. Also, the variations in peak intensity of asymmetric & symmetrical stretching vibrations (ASVI & SSVI) were detected using Fourier transform infrared spectrum (FTIR), indicating that the declines in peak intensity tended to be slower with thickness. Interestingly, the declines in physical integrity were tightly associated with increasing exhalation rate of PAEs. Average releasing rate of PAEs was 38.2%, 31.4%, 31.5% and 19.7% in LDPE films from 0.006 to 0.015 mm respectively. Critically, thicker film mulching can lead to greater soil water storage at plough layer (SWS-PL) and better thermal status, accordingly harvesting higher economic benefit. Therefore, LDPE film thickening may be a solution to reduce environmental risk but improve production efficiency in arid region.

Effects of aging on environmental behavior of plastic additives: Migration, leaching, and ecotoxicity

Microplastics (MPs), an emerging pollutant, are of global concern due to their wide distribution and large quantities. In addition to MPs themselves, various additives within MPs (such as plasticizers, flame retardants, antioxidants and heavy metals) may also have harmful effects on the environment. Most of these additives are physically bound to plastics and can therefore be leached from the plastic and released into the environment. Aging of MPs in the actual environment can affect the migration and release of additives, further increasing the ecotoxicological risk of additives to organisms. This work reviews the functions of several commonly used additives in MPs, and summarizes the representative characterization methods. Furthermore, the migration and leaching of additives in the human environment and marine environment are outlined. As aging promotes the internal chain breaking of MPs and the increase of specific surface area, it in turn stimulates the release of additives. The hazards of additive exposure have been elucidated, and various studies from the laboratory have shown that more toxic additives such as phthalates and brominated flame retardants can disrupt a variety of biological processes in organisms, including metabolism, skeletal development and so on. Increase of MPs ecological risk caused by the leaching of toxic additives is discussed, especially under the effect of aging. This study presents a systematic summary of various functional and environmental behaviors of additives in plastics, using weathering forces as the main factor, which helps to better assess the environmental impact and potential risks of MPs.

Interactions between polypropylene microplastics (PP-MPs) and humic acid influenced by aging of MPs

As an emerging pollutant, microplastics (MPs) may interact with dissolved organic matter (DOM) which is prevalent in the aqueous environment. Meanwhile, the aging of MPs in the actual environment increases the uncertainty of their environmental fate. Here, the interaction mechanisms between pristine and aged polypropylene microplastics (PP-MPs) and humic acid (HA) at pH 7.0 were explored. Microstructural changes of HA were examined by fluorescence and Fourier transformation infrared (FT-IR) spectroscopy. Atomic force microscopy coupled with infrared (AFM-IR) and micro-Raman techniques were used to characterize and analyze the interacted PP-MPs. The addition of HA increased the surface roughness of both pristine and aged PP-MPs. Results of AFM-IR and Raman spectra showed that the interaction of PP-MPs with HA accelerated their surface oxidation and enhanced the characteristic signals. XPS spectra showed that the oxygen content ratio of pristine and aged PP-MPs increased by 0.95% and 1.48% after the addition of HA, respectively. PP-MPs after aging interacted more strongly with HA and there was a higher affinity between them. Two-dimensional correlation spectroscopy (2D-COS) combined with FT-IR spectra further elucidated the interaction mechanism at the molecular level. This work will help to evaluate the environmental impact of MPs in ecosystems and understand their interactions with DOM.

Photocatalytic degradation of (micro)plastics using TiO2-based and other catalysts: Properties, influencing factor, and mechanism

(Micro)plastics pollution has raised global concern because of its potential threat to the biota. The review on recent developments of photocatalytic degradation of (micro)plastics is still insufficient. In this study, we have discussed various bare and composites photocatalysts involved in the photocatalytic degradation of (micro)plastics. The photocatalytic mechanisms and factors affecting the degradation were also discussed. To improve the performance of photocatalysts, their surface is modified with metal or non-metal dopants. These doped photocatalysts are then compounded with a variety of environmentally friendly and nontoxic polymers to prepare multifunctional composites. The generation of reactive oxygen species (ROS) plays an important role in the photocatalytic degradation of (micro)plastics, and superoxide ions (O₂^-) and hydroxyl radicals (OH) participate in the photocatalytic degradation, leading to the breaking of the polymer chain and the production of some intermediates. Although satisfactory progress has been achieved in the photodegradation of (micro)plastics, most photocatalytic degradation technologies investigated to date cannot realize the complete mineralization of (micro)plastics. Furthermore, based on the current challenges of the existing photocatalytic degradation technologies, perspectives for future research directions have been proposed. This review presents a systematic summary of the progress made in the photocatalytic degradation of (micro)plastics and offers a comprehensive reference for future research on improving the (micro)plastics photocatalytic degradation efficiency.

Microplastic-associated pathogens and antimicrobial resistance in environment

The ubiquitous use of microplastics and their release into the environment especially the water bodies by anthropogenic/industrial activities are the major resources for microplastic contamination. The widespread and often injudicious use of antimicrobial drugs or antibiotics in various sectors including human health and hygiene, agriculture, animal husbandry and food industries are leading to the release of antibiotics into the wastewater/sewage and other water bodies, particularly in urban setups and thus leads to the antimicrobial resistance (AMR) in the microbes. Microplastics are emerging as the hubs as well as effective carriers of these microbial pathogens beside their AMR-genes (ARGs) in marine, freshwater, sewage/wastewater, and urban river ecosystems. These drug resistant bacteria interact with microplastics forming synthetic plastispheres, the ideal niche for biofilm formations which in turn facilitates the transfer of ARGs via horizontal gene transfer and further escalates the occurrence and levels of AMR. Microplastic-associated AMR is an emerging threat for human health and healthcare besides being a challenge for the research community for effective management/address of this menace. In this review, we encompass the increasing prevalence of microplastics in environment, emphasizing mainly on water environments, how they act as centers and vectors of microbial pathogens with their associated bacterial assemblage compositions and ultimately lead to AMR. It further discusses the mechanistic insights on how microplastics act as hosts of biofilms (creating the plastisphere). We have also presented the modern toolbox used for microplastic-biofilm analyses. A review on potential strategies for addressing microplastic-associated AMR is given with recent success stories, challenges and future prospects.

Environmental behaviors of microplastics in aquatic systems: A systematic review on degradation, adsorption, toxicity and biofilm under aging conditions

Microplastics (MPs, < 5 mm) in the environment have attracted worldwide attention due to their wide distribution and difficulty in handling. Aging processes such as UV irradiation, biodegradation, physical abrasion and chemical oxidation can affect the environmental behavior of MPs. This review article summarizes different aging processes of MPs and subsequent effects on the adsorption of pollutants, the leaching of additives, and the toxicity of MPs. In addition, the formation process of biofilm on the surface of MPs and the interactions between biofilm and aged MPs are revealed. MPs can accumulate different environmental pollutants (organic pollutants, heavy metals, microorganisms, etc.) through surface adsorption, pore filling and distribution. Moreover, the aging of MPs affects their adsorption performance toward these pollutants due to a series of changes in their specific surface area and oxygen-containing functional groups. The release of some toxic additives such as phthalates after aging can enhance the toxic effects of MPs. Aging also changes the shape and size of MPs, which can affect the eating habits of the organisms and further increase the potential toxicity of MPs. This article conducts a systematical analysis and summary of the environmental behavior and physicochemical properties of MPs as well as the changes due to MPs aging, which helps to better understand the impact of aging on MPs in the environment. Future research on MPs aging should reduce the knowledge gap between laboratory simulation and actual conditions and increase the environmental relevance.

Effects of advanced oxidation processes on leachates and properties of microplastics

Microplastics (MPs) in natural environments undergo various aging processes. So far, little is known about the effects of chemical oxidation on leachates and properties of MPs. Here, we investigated the removal of pigment red from MPs by ozonation, Fenton, and heat-activated persulfate treatments, and further explored the nanoscale surface properties of treated MPs. Experimental results indicated that advanced oxidation processes effectively degraded pigment red released from MPs and the degradation rate was much faster than the leaching rate of pigments. Dominant reactive oxygen radicals in the ozone, Fenton, and heat-activated persulfate systems were identified as O₂^•-, HO•, and SO₄^•-, respectively. Height ranges of untreated, ozone-treated, Fenton-treated, and persulfate-treated MPs were 73 nm, 163 nm, 195 nm, and 206 nm, respectively. Oxidation of the -CH₃ and -CH₂ bonds occurred on the surface of treated MPs and the persulfate system achieved more serious oxidation degree than the ozone and Fenton systems. Addition of pigment red to the plastic polymer increased the glass transition temperature of MPs, which then showed a decline after advanced oxidation treatments except Fenton. The surface of persulfate-treated MPs was the stiffest, but the stiffness distribution of the ozone-treated and Fenton-treated MPs was more uneven. These research findings provide promising strategies to accelerate the aging process of MPs and contribute to a better understanding of the effects of aging on the environmental behavior of MPs.