Development of an eco-friendly biodegradable plastic from jack fruit peel cellulose with different plasticizers and Boswellia serrata as filler

Innovative Applications of Nanocellulose in 3D Printing: A Review

Cellulose nanofibrils (CNFs) and cellulose nanocrystals (CNCs) are nanoscale materials with unique mechanical properties and geometry that attract considerable interest in recent years for a wide range of applications. This review pays special attention to the recent progress of CNFs and CNCs assisted 3D printing in medicine, food, engineering, and architecture fields. Various types of CNFs and CNCs used for 3D printing are summarized. The addition of nanocellulose improves the printability and quality of printed objects in certain cases, leading to greater accuracy and durability. The created functional structures with specific properties have promising applications in various fields such as medicine and food preservation and viscosity enhancement. Finally, this work highlights the transformative potential of nanocellulose-assisted 3D printing to revolutionize a range of fields and the need for continued research and development to overcome current technical challenges.

Syzgium cumini seed/poly vinyl alcohol based water resistant biodegradable nano-cellulose composite reinforced with zinc oxide and silver oxide nanoparticles for improved mechanical properties

The current work explored a comparative study of biodegradable jamun seed/polyvinyl alcohol (JS) nanocomposites reinforced with varying concentrations of ZnO and Ag2O nano-fillers. The effect of spherical shaped ZnO and Ag2O nanoparticles (NPs) on the on structure, morphology, swelling and solubility, crystallinity and mechanical properties together with biodegradation performance of the composite films was fully studied. SEM results showed uniform distribution of ZnO and Ag2O nanofillers into the JS matrix and dense or compact nanocomposite films were formed. JS-ZnO and JS-Ag2O nanocomposites with 0.5 wt% ZnO and Ag2O content showed maximum crystallinity i.e. 11.3 and 9.58 %, respectively, as determined by XRD. When compared to the virgin JS film (8.41 MPa), the resultant JS-ZnO-0.5 and JS-Ag2O-0.5 nanocomposites showed significantly enhanced tensile strength (35.7 MPa, 29.2 MPa), elongation at break (15.42 %, 14.62 %) and Young's modulus (141 MPa, 126 MPa), respectively. Also, reduced swelling (120.4 % and 116.1 %) and solubility ratio (17.45 % and 18.42 %) was observed for JS-ZnO-0.5 and JS-Ag2O-0.5 nanocomposites, respectively. Biodegradation results showed that maximum degradation (88 %) was achieved for the JS film within 180 days of soil burial whereas JS-ZnO-0.1 and JS-Ag2O-0.1 nanocomposites showed 78 % and 72 % degradation within 180 days, respectively.

Polysaccharides from fruit and vegetable wastes and their food applications: A review

Fruit and vegetables are a great source of nutrients and have numerous health benefits. The fruit and vegetable industry produces enormous amounts of waste such as peels, seeds, and stems. The amount of this waste production has increased, causing economic and environmental problems. Fruit and vegetable wastes (FVWs) have the potential to be recovered and used to produce high-value goods. Furthermore, FVWs have a large variety and quantity of polysaccharides, which makes them interesting to study for potential industrial use. Currently, the investigations on extracting polysaccharides from FVWs and examining how they affect human health are increasing. The present review focuses on polysaccharides from FVWs such as starch, pectin, cellulose, and inulin, and their various biological activities such as anti-inflammatory, anti-tumor, anti-diabetic, antioxidant, and antimicrobial. Additionally, applications as packaging material, gelling agent, emulsifier, prebiotic, and fat replacer of polysaccharides from FVWs in the food industry have been viewed in detail. As a result, FVWs can be reused as the source of polysaccharides, reducing environmental pollution and enabling sustainable green development. Further investigation of the biological activities of polysaccharides from FVWs on human health is of great importance for using these polysaccharides in food applications.

Biofilms from poly-vinyl alcohol/palmyra root sprout with Boswellia serrata, carbon dots and anthocyanin for sensing the freshness of sardine fish

One of the main issues that customers worldwide have is food adulteration. In commercial packages, freshness cannot always be determined visually. Here, we propose sensitive films for use in food packaging that could alter colour to indicate a change in freshness. Hybrid, multifunctional, and eco-friendly films were prepared from polyvinyl alcohol/palmyra root sprout (PVA/PRS), fused with soy protein isolate carbon dot (CD), Boswellia serrata (BS), and Clitoriaternatea anthocyanin (CTE). The films showed pH sensitivity, antioxidant, and UV barrier properties. By creating hydrogen bonds between PRS and the other fillers, adding these substances makes PVA less crystallized. These interactions were verified by infrared Fourier-transform analysis. When compared to PVA, PRS films had significantly lower moisture content and swelling ratios. The UV-blocking capabilities of the films were greatly improved by the addition of CD, BS, and CTE without compromising their mechanical, thermal, or water vapor barrier properties. The composite film PVA/PRS/CD/BS/CTE exhibited a maximum tensile strength value of 69.47 ± 1.49 MPa. The CT extract provides the film with superior antioxidant properties. The colorimetric films PVA/PRS/CTE and PVA/PRS/CD/BS/CTE showed distinct pH-responsive colour-change properties as well as good colour stability. The colorimetric films were used to test the freshness of sardine fish, and they revealed unique colour changes that indicated whether the fish sample was spoiled or not.

Efficient Immobilization of heavy metals using newly synthesized magnetic nanoparticles and some bacteria in a multi-metal contaminated soil

Simultaneous application of modified Fe3O4 with biological treatments in remediating multi-metal polluted soils, has rarely been investigated. Thus, a pioneering approach towards sustainable environmental remediation strategies is crucial. In this study, we aimed to improve the efficiency of Fe3O4 as adsorbents for heavy metals (HMs) by applying protective coatings. We synthesized core-shell magnetite nanoparticles coated with modified nanocellulose, nanohydrochar, and nanobiochar, and investigated their effectiveness in conjunction with bacteria (Pseudomonas putida and Bacillus megaterium) for remediating a multi-metal contamination soil. The results showed that the coatings significantly enhanced the immobilization of heavy metals in the soil, even at low doses (0.5%). The coating of nanocellulose had the highest efficiency in stabilizing metals due to the greater variety of surface functional groups and higher specific surface area (63.86 m2 g-1) than the other two coatings. Interestingly, uncoated Fe3O4 had lower performance (113.6 m2 g-1) due to their susceptibility to deformation and oxidation. The use of bacteria as a biological treatment led to an increase in the stabilization of metals in soil. In fact, Pseudomonas putida and Bacillus megaterium increased immobilization of HMs in soil successfully because of extracellular polymeric substances and intensive negative charges. Analysis of metal concentrations in plants revealed that Ni and Zn accumulated in the roots, while Pb and Cd were transferred from the roots to the shoots. Treatment Fe3O4 coated with modified nanocellulose at rates of 0.5 and 1% along with Pseudomonas putida showed the highest effect in stabilizing metals. Application of coated Fe3O4 for in-situ immobilization of HMs in contamination soils is recommendable due to their high metal stabilization efficiency and suitability to apply in large quantities.

Extraction and characterization of microcrystalline cellulose from Vachellia nilotica plant leaves: A biomass waste to wealth approach

Biobased waste utilization is an intriguing area of research and an ecologically conscious approach. Plant-based materials can be used to render cellulose, which is an eco-friendly material that can be used in numerous aspects. In the current investigation, cellulose was extracted from the leaves of the Vachellia nilotica plant via acid hydrolysis. The application of this research is specifically directed toward the utilization of undesirable plant sources. To validate the extracted cellulose, FT-IR spectroscopy was applied. The cellulose was measured to have a density of 1.234 g/cm3. The crystallinity index (58.93%) and crystallinity size (11.56 nm) of cellulose are evaluated using X-ray diffraction spectroscopy analysis. The highest degradation temperature (320.8°C) was observed using thermogravimetry and differential scanning calorimetry curve analysis. The analysis of particle size was conducted utilizing images captured by scanning electron microscopy. Particle size of less than 30 μm was found and they exhibit non-uniform orientation. Additionally, atomic force microscopy analysis shows an improved average surface roughness (Ra), which increases the possibility of using extracted cellulose as reinforcement in biofilms.

Fabrication of biopolymeric sheets using cellulose extracted from water hyacinth and its application studies for reactive red dye removal

Driven by the imperative need for sustainable and biodegradable materials, this study focuses on two pivotal aspects: cellulose extraction and dye removal. The alarming repercussions of non-biodegradable food packaging materials on health and the environment necessitate the exploration of viable alternatives. Herein, we embark on creating easily degradable biopolymer substitutes, achieved through innovative crafting of a biodegradable cellulose sheet sourced from extracted cellulose. Concurrently, the significant environmental and health hazards posed by textile industry discharge of wastewater laden with persistent dyes demand innovative treatment strategies. This study extensively investigated four distinct methods of cellulose extraction from water hyacinth, a complex aquatic weed. The functional groups, crystallinity index, thermal stability, thermal effects, and morphology of the extracted cellulose were characterized by FTIR, XRD, TGA, DSC, and SEM. This exploration yielded a notable outcome, as the most promising yield (39.4 ± 0.02% w/w) emerged using 2% sodium chlorite and 2% glacial acetic acid as bleaching agents, surpassing other methods. Building on this foundational cellulose extraction process, the extracted fibers were transformed into highly biodegradable cellulose sheets, outlining conventional packaging materials. Moreover, these cellulose sheets exhibit exceptional efficacy in adsorbing reactive red dye, with the adsorption capacity of 71.43 mg/g by following pseudo-second kinetics. This study establishes an economically viable avenue for repurposing challenging aquatic weeds into commercially valuable biopolymers. The potential of these sheets for dye removal, coupled with their innate biodegradability, opens auspicious avenues for broader applications encompassing commercial wastewater treatment procedures.

The phototrophic bacteria Rhodomicrobium spp. are novel chassis for bioplastic production

Polyhydroxybutyrate (PHB) is a bio-based, biodegradable alternative to petroleum-based plastics. PHB production at industrial scales remains infeasible, in part due to insufficient yields and high costs. Addressing these challenges requires identifying novel biological chassis for PHB production and modifying known biological chassis to enhance production using sustainable, renewable inputs. Here, we take the former approach and present the first description of PHB production by two prosthecate photosynthetic purple non-sulfur bacteria (PNSB), Rhodomicrobium vannielii and Rhodomicrobium udaipurense. We show that both species produce PHB across photoheterotrophic, photoautotrophic, photoferrotrophic, and photoelectrotrophic growth conditions. Both species show the greatest PHB titers during photoheterotrophic growth on butyrate with dinitrogen gas as a nitrogen source (up to 44.08 mg/L), while photoelectrotrophic growth demonstrated the lowest titers (up to 0.13 mg/L). These titers are both greater (photoheterotrophy) and less (photoelectrotrophy) than those observed previously in a related PNSB, Rhodopseudomonas palustris TIE-1. On the other hand, we observe the highest electron yields during photoautotrophic growth with hydrogen gas or ferrous iron electron donors, and these electron yields were generally greater than those observed previously in TIE-1. These data suggest that non model organisms like Rhodomicrobium should be explored for sustainable PHB production and highlights utility in exploring novel biological chassis.

New vegetable-waste biomaterials by Lupin albus L. as cellular scaffolds for applications in biomedicine and food

The reprocessing of vegetal-waste represents a new research field in order to design novel biomaterials for potential biomedical applications and in food industry. Here we obtained a biomaterial from Lupinus albus L. hull (LH) that was characterized micro-structurally by scanning electron microscopy and for its antimicrobial and scaffolding properties. A good adhesion and proliferation of human mesenchymal stem cells (hMSCs) seeded on LH scaffold were observed. Thanks to its high content of cellulose and beneficial phytochemical substances, LH and its derivatives can represent an available source for fabrication of biocompatible and bioactive scaffolds. Therefore, a reprocessing protocol of LH was optimized for producing a new LH bioplastic named BPLH. This new biomaterial was characterized by chemico-physical analyses. The water uptake, degradability and antimicrobial properties of BPLH were evaluated, as well as the mechanical properties. A good adhesion and proliferation of both fibroblasts and hMSCs on BPLH were observed over 2 weeks, and immunofluorescence analysis of hMSCs after 3 weeks indicates an initial commitment toward muscle differentiation. Our work represents a new approach toward the recovery and valorization of the vegetal waste showing the remarkable properties of LH and BPLH as cellular waste-based scaffold with potential applications in cell-based food field as well as in medicine for topical patches in wound healing and bedsores treatment.

Neem extract-blended nanocellulose derived from jackfruit peel for antibacterial packagings

The use of jackfruit peel as a source for natural and fully biodegradable "nanocellulose" (NC) for the production of bioplastics with Azadirachta indica (A. indica) extracts and polyethylene glycol (PEG) for the antibacterial properties is investigated. The characterization of the biocomposite using FT-IR and WXRD was reported. The physicochemical properties including thickness, moisture content, water holding capacity, swelling, porosity, and biodegradability in soil were investigated. The incorporation of A. indica extract revealed an increased shelf life due to the strong antibacterial activity, and these biocomposites were degraded in soil within 60 days after the end use without any harm to the environment. Jackfruit-derived nanocellulose film blended with A. indica extract exhibited strong antibacterial activity against gram-positive and gram-negative food spoilage bacteria. Disc diffusion assay, live/dead assay, and CFU analysis confirmed the antibacterial property of the synthesized film. Moreover, the films clearly prevented the biofilm formation in bacteria. Thus, the developed bioplastics can be utilized as appropriate substitutes to food packaging materials and also for biomedical applications such as wound dressings.

COVID-19: An Accelerator for Global Plastic Consumption and Its Implications

Plastic has been ingrained in our society. Repercussions on the usage of nonbiodegradable plastics and their problems have been recently realized. Despite its detrimental environmental impact, the COVID-19 epidemic has compelled worldwide citizens to increase their plastic use due to affordability and availability. The volume of hospital solid waste, particularly plastics, is overgrowing due to an unexpected increase in medical waste, culminating in the global waste management catastrophe. Henceforth, adopting good waste management practices along with appropriate technologies and viewing the current issue from a fresh perspective would be an opportunity in this current scenario. Accordingly, this review study will focus on the plastic waste scenario before and during the COVID-19 epidemic. This review also disseminates alternative disposal options and recommends practical solutions to lessen human reliance on traditional plastics. Further, the responsibilities of various legislative and regulatory authorities at the local, regional, and worldwide levels are addressed.

Preparation of green film with improved physicochemical properties and enhanced antimicrobial activity using ingredients from cassava peel, bamboo leaf and rosemary leaf

Persistent petroleum based plastic polymers are posing a threat to the environment and human health. Hence, preparation of eco-friendly packaging materials from natural sources is innovative idea to replace persistent plastic films. However, biodegradable films from biomass absorb water that can promote bacterial growth and affect lifetime of film as well as the packed products. In this work, new biodegradable film with improved antimicrobial activity, physicochemical property and less water absorbing and holding property is prepared from modified blend of cassava peel starch (CPS), silica nanoparticle (SNP), glycerol plus rosemary essential oil (REO). The mixture (blend) of CPS, SNPs and glycerol in measured amount of distilled water was treated with acetic anhydride to reduce hydrophilic nature of the blend before adding REO. The content of SNPs in the biofilm was optimized by varying the concentration of SNPs (0.2–0.8%; w/w) keeping other factors constant. Based on the characterization results, the physicochemical property of the biofilms was dependent on the content of SNPs and the best result (film) has been found with 0.6% SNPs which was considered as optimum amount for further experiments. The film prepared from modified blend with 0.6% SNP had shown low water absorption, low water vapor transition rate, improved thermal stability, and less biodegradability. Based on the image from profilometer, the modified blend had shown better homogeneity with REO than unmodified blend and the film with REO had shown better antimicrobial activity as compared to the film without REO (control). The antimicrobial activity of the film with REO was also compared with reference (gentamicin) and its activity was comparable and promising. In general, the prepared film had shown improved physicochemical properties and enhanced antimicrobial activity.

Preparation of flexible and UV-blocking films from lignin-containing cellulose incorporated with tea polyphenol/citric acid

Lignin-containing bamboo cellulose, fractionated from a pilot-scale microwave liquefaction of bamboo was dissolved in tetrabutylammonium acetate/dimethyl sulfoxide (TBAA/DMSO) for the fabrication of highly flexible, transparent and UV-blocking films. Tea polyphenol (TP) or citric acid (CA) was added during the dissolving process in order to modify the film's properties. The results showed that the addition of TP obviously improved the elongation at break (triple that of the control) and UV-blocking ability of the films. Both the addition of TP and CA could increase the water contact angle of the films. The films incorporated with TP and CA were much more thermal stable than previously reported similar films. The proposed film fabrication mechanism revealed that stable hydrogen bonds formed between the lignin-cellulose matrix and TP/CA, resulting in the enhancement on the properties of the films. This present study showed that lignin-containing cellulose with the incorporation of TP/CA had great potential in the preparation of films in place of plastic.

Plastic waste management practices pertaining to India with particular focus on emerging technologies

Under the parent petrochemical industries, plastic industry is proliferating enormously over the past several years globally due to its advantages in terms of weight, robustness, expense, versatility, and durability. Due to the diversified consumer base representing varied climate zones, food habits, and standards of living, the generation and growth opportunities for the plastic industry in India are particularly distinct and humongous. The present work extensively reviews the Indian plastic industry with primary focus on the evolving technologies for plastic waste valorization encompassing their level of utilization, technology readiness, and progress achieved at R&D level. The study attempts to recognize different issues related to technology, recycling, policy, research, regulation that should be given attention to formulate an improved plastic waste management strategy in the region. Though significant shares of waste plastics in the country are processed by traditional practices, state-of-the-art technologies primarily plastic to oil conversion, in road making and in cement manufacturing, are being deployed at increasing rate. Action to tackle the problem of plastic contamination in India will need to adopt a pan India strategic consensus/concurrent approach for effective waste collection and segregation with active participation of urban local bodies, fixing the role of the informal sectors, investment for reliable technology adoption with skilled manpower for operation, adoption of circular economy schemes involving plastic waste co-processing, and providing support to work on R&D for better penetration of the proven plastic valorization options along with their environmental and social implications.

Sustainable biodegradable denim waste composites for potential single-use packaging

Every year a massive 2.16 million metric tons of denim jeans is globally wasted and mostly goes into landfill. Though denim is highly rich in cellulose, its valorisation has received little attention. A few attempts have previously shown prospects of denim in composites, though the ultimate products were non-compostable due to the nature of the chosen matrix. This research proposes a novel development of denim/cornstarch composite, maintaining 50/50 fractions, using different denim snippet size. A smoother denim/cornstarch composite morphology and higher tensile strength were observed when smaller denim snippets were used, whereas larger snippets produced voids and roughness and a higher hygroscopicity. Composite prepared from semi-gelatinised cornstarch showed a completely flexible structure similar to non-woven sheet. The chemical structure was observed identical in all of the composites and a good structural compatibility perceived. Individual peaks of both denim (1105 cm^-1 and 1705 cm^-1) and cornstarch (1081 cm^-1) were confirmed in all composite samples, either gelatinised or semi-gelatinised cornstarch used. Overall, this work reveals an eco-friendly approach to utilise consumed denim waste, with insight on possible fine-tuning through alteration of denim snippet size and cornstarch gelatinisation. The mechanical and moisture properties of the composites also suggest their potential application in single-use packaging.

Nanocellulose as green material for remediation of hazardous heavy metal contaminants

Heavy metal pollution generated by urban and industrial activities has become a major global concern due to its high toxicity, minimal biodegradability, and persistence in the food chain. These are the severe pollutants that have the potential to harm humans and the environment as a whole. Mercury, chromium, copper, zinc, cadmium, lead, and nickel are the most often discharged hazardous heavy metals. Nanocellulose, reminiscent of many other sustainable nanostructured materials, is gaining popularity for application in bioremediation technologies owing to its many unique features and potentials. The adsorption of heavy metals from wastewaters is greatly improved when cellulose dimension is reduced to nanometric levels. For instance, the adsorption efficiency of Cr³⁺ and Cr⁶⁺ is found to be 42.02% and 5.79% respectively using microcellulose, while nanocellulose adsorbed 62.40% of Cr³⁺ ions and 5.98% of Cr⁶⁺ ions from contaminated water. These nanomaterials are promising in terms of their ease and low cost of regeneration. This review addresses the relevance of nanocellulose as biosorbent, scaffold, and membrane in various heavy metal bioremediation, as well as provides insights into the challenges, future prospects, and updates. The methods of designing better nanocellulose biosorbents to improve adsorption efficiency according to contaminant types are focused.

Lignocellulose in future biorefineries: Strategies for cost-effective production of biomaterials and bioenergy

Lignocellulosic biomass has been emerging as a biorefinery precursor for variety of biofuels, platform chemicals and biomaterials because of its specific surface morphology, exceptional physical, chemical and biological characteristics. The selection of proper raw materials, integration of nano biotechnological aspects, and designing of viable processes are important to attain a cost-effective route for the development of valuable end products. Lignocellulose-based materials can prove to be outstanding in terms of techno-economic viability, as well as being environmentally friendly and reducing effluent load. This review should facilitate the identification of better lignocellulosic sources, advanced pretreatments, and production of value-added products in order to boost the future industries in a cleaner and safer way.

Sustainable production of polyhydroxybutyrate from autotrophs using CO2 as feedstock: Challenges and opportunities

Due to industrialization and rapid increase in world population, the global energy consumption has increased dramatically. As a consequence, there is increased consumption of fossil fuels, leading to a rapid increase in CO₂ concentration in the atmosphere. This accumulated CO₂ can be efficiently used by autotrophs as a carbon source to produce chemicals and biopolymers. There has been increasing attention on the production of polyhydroxybutyrate (PHB), a biopolymer, with focus on reducing the production cost. For this, cheaper renewable feedstocks, molecular tools, including metabolic and genetic engineering have been explored to improve microbial strains along with process engineering aspects for scale-up of PHB production. This review discusses the recent advents on the utilization of CO₂ as feedstock especially by engineered autotrophs, for sustainable production of PHB. The review also discusses the innovations in cultivation technology and process monitoring while understanding the underlying mechanisms for CO₂ to biopolymer conversion.

Environmental impacts of functional fillers in polylactide (PLA)-based bottles using life cycle assessment methodology

The use of functional fillers added to PLA-based products can be beneficial in terms of cost reduction and properties improvement. The existing life cycle assessment of PLA containers mainly focuses on the greenhouse gas (GHG) emission of PLA material model without fillers, and overlooked environmental impacts of functional fillers and the significant environmental problem-shifting on other indicators. This paper presents a life cycle assessment (LCA) of cooking oil bottles made from PLA, PLA/Fibers and PLA/CaCO₃ considering a wide spectrum impacts, and compares the environmental profile of them based on normalization and weighting analysis. The functional unit was set at 1000 bottles of 900 mL. The system boundary is from cradle to gate, including PLA-based particles production, bottle processing and transportation. The results showed that the contribution of the primary energy demand (PED) index of PLA-based bottles accounted for 159% to 192% of the global warming potential (GWP) index, which may be overlooked in previous studies. Compared to PLA and PLA/Fibers bottles, PLA/CaCO₃ bottles have lower environmental impacts in most categories and the lowest integrated impact index. In terms of PLA/CaCO₃ bottles, PLA particles and electricity contributed the most to energy conservation and emission reduction (ECER) results, accounting for 63.09% and 28.26% to the integrated impacts index, respectively. The results imply that the use of fillers in PLA bottles tends to reduce the environmental impacts, especially calcium carbonate can efficiently minimize environmental impacts of PLA-based bottles. And PED, SO₂ and NO_X indicators ranking above CO₂ should be taken into consideration to avoid the environmental problem-shifting, which can provide valuable reference for the creation of the method of making biodegradable plastic and carbon neutral policies.

Advanced biomaterials for sustainable applications in the food industry: Updates and challenges

Maintaining the safety and quality of food are major concerns while developing biomaterial based food packaging. It offers a longer shelf-life as well as protection and quality control to the food based on international standards. Nano-biotechnology contributes to a far extent to make advanced packaging by developing multifunctional biomaterials for potential applications providing smarter materials to consumers. Applications of nano-biocomposites may thus help to deliver enhanced barrier, mechanical strength, antimicrobial and antioxidant properties to novel food packaging materials. Starch derived bioplastics, polylactic acid and polyhydroxybutyrate are examples of active bioplastics currently in the food packaging sector. This review discusses the various types of biomaterials that could be used to improve future smarter food packaging, as well as biomaterials' potential applications as food stabilizers, pathogen control agents, sensors, and edible packaging materials. The regulatory concerns related to the use of biomaterials in food packaging and commercially available biomaterials in different fields are also discussed. Development of novel biomaterials for different food packaging applications can therefore guarantee active food packaging in future.