Engineered biochars for recovering phosphate and ammonium from wastewater: A review

Phosphorus recovery and reuse: Innovating with biochar in the circular economy

Global challenges of phosphorus pollution and scarcity underscore an urgent need for the efficient recycling of this critical resource. Biochar, a sustainable and economical material, has demonstrated significant potential as an adsorbent for phosphorus, offering a viable solution for its recovery from wastewater. Various techniques have been explored to improve the ability of biochar to adsorb inorganic phosphate. While numerous studies have reviewed methods of biochar modification, the underlying adsorption mechanisms, and the thermodynamics and kinetics involved, a thorough examination that addresses the practical challenges of real-world wastewater treatment is currently lacking. This review aims to fill this gap by quantitatively analyzing the impact of coexisting species in wastewater on the adsorption of phosphate and by exploring the potential for simultaneous removal of other contaminants, such as nutrients, heavy metals, and dissolved organic matter. The review also discusses factors that affect the desorption of phosphate from biochar and presents practical applications for biochars post-adsorption. These applications include their use as slow-release phosphorus fertilizers, additives in concrete, and as novel adsorbents for the removal of heavy metals. This comprehensive analysis serves to synthesize current research on phosphate recovery by biochars and to propose practical uses for the adsorbed phosphorus, thereby guiding the development of biochar adsorption technology towards more effective and practical phosphorus management strategies.

Simultaneous removal of ammonium, phosphate, and phenol via self-assembled biochar composites CBCZrOFe3O4 and its utilization as soil acidity amelioration

ABSTRACTHigh concentrations of ammonium, phosphate, and phenol are recognized as water pollutants that contribute to the degradation of soil acidity. In contrast, small quantities of these nutrients are essential for soil nutrient cycling and plant growth. Here, we reported composite materials comprising biochar, chitosan, ZrO, and Fe3O4, which were employed to mitigate ammonium, phosphate, and phenol contamination in water and to lessen soil acidity. Batch adsorption experiments were conducted to assess the efficacy of the adsorbents. Initially, comparative studies on the simultaneous removal of NH4, PO4, and phenol using CB (biochar), CBC (biochar + chitosan), CBCZrO (biochar + chitosan + ZrO), and CBCZrOFe3O4 (biochar + chitosan + ZrO + Fe3O4) were conducted. The results discovered that CBCZrOFe3O4 exhibited the highest removal percentage among the adsorbents (P < 0.05). Adsorption data for CBCZrOFe3O4 were well fitted to the second-order kinetic and Freundlich isotherm models, with maximum adsorption capacities of 112.65 mg/g for NH4, 94.68 mg/g for PO4 and 112.63 mg/g for phenol. Subsequently, the effect of CBCZrOFe3O4-loaded NH4, PO4, and phenol (CBCZrOFe3O4-APP) on soil acidity was studied over a 60-day incubation period. The findings showed no significant changes (P < 0.05) in soil exchangeable acidity, H+, Mg, K, and Na. However, there was a substantial increase in the soil pH, EC, available P, CEC, N-NH4, and N-NO3. A significant reduction was also observed in the available soil exchangeable Al and Fe (P < 0.05). This technique demonstrated multi-functionality in remediating water pollutants and enhancing soil acidity.

Sugarcane bagasse-derived biochar modified by alkali for enriching surface functional groups to effectively treat ammonium-contaminated water

In this study, sugarcane bagasse (SB), which was preliminarily treated with H3PO4, was utilized to produce biochar (SB-BC). The SB-BC was subsequently modified with KOH to enrich oxygen-containing functional groups (OCFGs) for the enhanced adsorption of NH4+ from wastewater. Batch tests revealed that KOH-modified SB-BC (SB-MBC) increased the maximum Langmuir adsorption capacity of NH4+ by approximately twofold, from 27.1 mg/g for SB-BC to 53.1 mg/g for SB-MBC. The optimal operational conditions for NH4+ adsorption onto SB-MBC were pH of 7.0 and a biochar dose of 3.0 g/L for the removal of 50 mg/L NH4+ at room temperature (25 ± 2 °C) over 180 min of contact. The enhanced adsorption capacity of NH4+ onto SB-MBC was due to the important contribution of the OCFGs enriched on the surface of biochar, which was increased by about fourfold, after being modified by KOH. The NH4+ adsorption dynamics were better fitted by the Elovich and the NH4+ adsorption isotherms were better described by Langmuir and Sips models, showing that the adsorption process was dominated by monolayer chemisorption. The properties of the adsorption materials before and after adsorption of NH4+ confirmed that cation exchange, electrostatic attraction and surface complexation were the main mechanisms controlling the adsorption process. The desorption and reusability tests of NH4+-saturated SB-MBC revealed that NH4+ adsorption slightly decreased after three successive sorption‒desorption cycles. The findings suggested that SB-MBC is a promising and feasible adsorbent for the effective treatment of NH4+-contaminated water sources. Future work should conduct tests for treatment of NH4+-rich real wastewater and utilize NH4+-saturated SB-MBC as slow releasing fertilizer for plants growth.

A critical review on emerging industrial applications of chars from thermal treatment of biosolids

Thermochemical treatment is rapidly emerging as an alternative method for the management of stabilised sewage sludges (biosolids) to effectively reduce waste volume, degrade contaminants, and generate valuable products, particularly biochar and hydrochar. Biosolids-derived char has a relatively high concentration of heavy metals compared with agricultural chars but is still applied to land due to its beneficial properties and ability to retain metals. However, non-agricultural applications can provide additional economic and environmental benefits, promote sustainability and support a circular economy. This review identifies extensive non-agricultural opportunity for biosolids biochar, including adsorption, catalysis, energy storage systems, biological process enhancement, and as additives for rubber compounding and construction. Biosolids chars have received limited attention vs agricultural char, and we draw on both areas of literature, as well as evaluating differences between agricultural and biosolids chars. A key opportunity for biosolids biochar in comparison with other materials and agricultural chars is its sustainable and low-cost nature, relatively high metals content, improving catalyst properties, and ability to modify in various stages to tune it to specific applications. The specific opportunities for hydrochar have only received limited attention. Research needs to include better understanding of the benefits and limitations for specific applications, as well as adjacent drivers, including society, regulation, and market and economics.

Exploring acid mine drainage treatment through adsorption: a bibliometric analysis

Discharge of acidic wastewater from mining activities (acid mine drainage (AMD)) is a major global environmental and public health issue. Although several approaches, including chemical precipitation and membrane technology, have been developed to treat AMD, adsorption has emerged as the most promising technology due to its cost-effectiveness and efficacy. Despite the wide adoption of adsorption in treating AMD, the evolution of research in this area remains poorly understood. To address this gap, a bibliometric analysis of the most recent literature involving the application of adsorption in AMD remediation was conducted by merging datasets of articles from Scopus (1127) and the Web of Science Core Collection (1422), over the past decade (2013-2022). This analysis revealed a yearly increase of 11% in research publications, primarily contributed by China, the United States, and South Africa. Keyword analysis revealed that natural schwertmannites and their transformations, activated carbon, zeolites, and clay minerals, are the most extensively employed adsorbents for the removal of common metals (arsenic, chromium, iron, manganese, among others). The findings underscore the need for future focuses on recovering rare earth elements, using nanoparticles and modified materials, pursuing low-cost, sustainable solutions, integrating hybrid technologies, pilot-scale studies, exploring circular economic applications of AMD sludges, and inter-continental collaborations. These insights hold significant future implications, serving as a valuable reference to stakeholders in the mining industry.

Recent approaches and advancement in biochar-based environmental sustainability: Is biochar fulfilling the sustainable development goals?

This review highlights the application of biochar (BC) for attaining different SDGs (SDG 6: clean water and sanitation, SDG 7: affordable and clean energy, SDG 13: climate action, and SDG 15: life on land). These goals coincide with the various existing environmental problems including wastewater treatment, soil amendment, greenhouse gas remediation, and bioenergy generation. So, the review encompasses the various mechanisms involved in the BC-assisted treatment and reclamation of water, pollutant immobilization and enhancing soil properties, reduction of greenhouse gas emission during the wastewater treatment process and soil amendment mechanisms, bioenergy generation through various electrode material, biodiesel production, and many more. The review also explains the various drawbacks and limitations of BC application to the available environmental issues. Conclusively, it was apprehended that BC is an appropriate material for several environmental applications. More research interventions are further required to analyze the applicability of different BC materials for attaining other available SDGs.

Highly efficient removal of aqueous phosphate via iron-manganese fabricated biochar: Performance and mechanism

Biochar (BC) has emerged as a potential solution to phosphate removal from wastewater primarily resulting from global overuse of fertilizers. Further modification by embedment of iron (Fe)-manganese (Mn) oxides on BC can enhance phosphate removal; however, the modification method serves as a vital factor underlying distinctive removal performances and mechanisms, which have yet been systematically examined. Herein, two Fe-Mn modified BC, Fe/MnBC (comprised of Fe3O4 and MnO2) and Fe-MnBC (comprised of MnFe2O4), were comprehensively investigated for gaining insights into the unsolved perspectives. The results indicated that Fe-MnBC exhibited a markedly greater maximum phosphate adsorption capacity of 135.88 mg g-1 than that of Fe/MnBC with 17.93 mg g-1. The comparative results based on microstructure and spectroscopic analyses suggested that different Fe and Mn oxides were successfully loaded, which played a distinctive role in phosphate removal. Further characterizations unveiled that the key mechanisms for phosphate removal by Fe/MnBC are inner-sphere complexation and precipitation, while electrostatic interaction and outer-sphere complexation are the dominant mechanisms underlying the notable performance of Fe-MnBC. The delicately designed Fe-MnBC with special structure and property also enabled a superior regeneration capacity, which presented a promisingly high phosphate removal efficacy of over 81.34% after five cycles. These results enhance comprehension regarding the impact of biochar modification techniques on phosphate removal, offering positive indications for the remediation of excessive phosphate and other pollutant-containing water through feasible design and green chemicals.

Advances in sustainable nano-biochar: precursors, synthesis methods and applications

Nano-biochar, characterized by its environmentally friendly nature and unique nanostructure, offers a promising avenue for sustainable carbon materials. With its small particle size, large specific surface area, abundant functional groups and tunable pore structure, nano-biochar stands out due to its distinct physical and chemical properties compared to conventional biochar. This paper aims to provide an in-depth exploration of nano-biochar, covering its sources, transformation mechanisms, properties, applications, and areas requiring further research. The discussion begins with an overview of biomass sources for nano-biochar production and the conversion processes involved. Subsequently, primary synthesis methods and strategies for functionalization enhancement are examined. Furthermore, the applications of nano-biochar in catalysis, energy storage, and pollutant adsorption and degradation are explored and enhanced in various fields.

Bio-derived carbon-based materials for sustainable environmental remediation and wastewater treatment

Biosynthesized nanocomposites, particularly those incorporating carbon-based materials, exhibit exceptional tunability and multifunctionality, surpassing the capabilities of conventional materials in these aspects. Developing practical solutions is critical to address environmental toxins from pharmaceuticals, heavy metals, pesticides, and dyes. Biomass waste is a readily available carbon source, which emerges as a promising material for producing biochar due to its inherent advantages: abundance, low cost, and environmentally friendly nature. This distribution mainly uses carbon-based materials (CBMs) and biomass waste in wastewater treatment. This review paper investigates several CBM types, including carbon aerogels, nanotubes, graphene, and activated carbon. The development of bio-derived carbon-based nanomaterials are discussed, along with the properties and composition of carbon materials derived from biomass waste and various cycles, such as photodegradation, adsorption, and high-level oxidation processes for natural remediation. In conclusion, this review examines the challenges associated with biochar utilization, including cost, recovery, and practical implementation.

Phosphorus recovery from ultrafiltered membrane wastewater by biochar adsorption columns: The effect of loading rates

The present study used bench scale columns filled with biochar for phosphorous (P) recovery from real ultrafiltered wastewater. No studies are available about the potentiality of biochar using ultrafiltered real wastewater. Therefore, this study aimed to assess phosphate (PO4 3-) recovery by biochar-packed columns employing real treated wastewater from an ultrafiltration process. Three flow rates were tested, specifically 0.7, 1.7 and 2.3 L h-1, to gain insights into the optimal working conditions. Results revealed that the maximum amount of PO4 3- recovery (namely, 3.43 mg g-1 biochar) can be achieved after 7 h by employing the highest tested flow rate. Furthermore, the phosphorus exchange capacity (PEC) was inversely correlated with the feeding flow rate (FFR), with PEC values equal to 35, 25 and 9 % for FFR of 0.67, 1.7 and 2.3 L h-1, respectively. The pseudo-first order model best approximated the adsorption kinetics, thus suggesting that the adsorption of phosphate by biochar depends on its concentrations (i.e. physiosorption mechanism).

Nano La(OH)3 modified lotus seedpod biochar: A novel solution for effective phosphorus removal from wastewater

Effective removal of phosphorus from water is crucial for controlling eutrophication. Meanwhile, the post-disposal of wetland plants is also an urgent problem that needs to be solved. In this study, seedpods of the common wetland plant lotus were used as a new raw material to prepare biochar, which were further modified by loading nano La(OH)3 particles (LBC-La). The adsorption performance of the modified biochar for phosphate was evaluated through batch adsorption and column adsorption experiments. Adsorption performance of lotus seedpod biochar was significantly improved by La(OH)3 modification, with adsorption equilibrium time shortened from 24 to 4 h and a theoretical maximum adsorption capacity increased from 19.43 to 52.23 mg/g. Moreover, LBC-La maintained a removal rate above 99% for phosphate solutions with concentrations below 20 mg/L. The LBC-La exhibited strong anti-interference ability in pH (3-9) and coexisting ion experiments, with the removal ratio remaining above 99%. The characterization analysis indicated that the main mechanism is the formation of monodentate or bidentate lanthanum phosphate complexes through inner sphere complexation. Electrostatic adsorption and ligand exchange are also the mechanisms of LBC-La adsorption of phosphate. In the dynamic adsorption experiment of simulated wastewater treatment plant effluent, the breakthrough point of the adsorption column was 1620 min, reaching exhaustion point at 6480 min, with a theoretical phosphorus saturation adsorption capacity of 6050 mg/kg. The process was well described by the Thomas and Yoon-Nelson models, which indicated that this is a surface adsorption process, without the internal participation of the adsorbent.

Reducing nitrogen loss from farmland by layered double hydroxide-supported carbon dots-enhanced ammonium immobilization

It remains a significant challenge to develop a kind of cost-effective and eco-friendly adsorbent with strong immobilization capabilities for ammonium in farmland. In this work, we employed Ca/Al layered double hydroxide-supported carbon dots (CDs@Ca/Al-LDHs) as a novel and efficient adsorbent for ammonium immobilization both in aqueous and soil environments. Such a composite could exhibit a high adsorption capacity towards ammonium in solution, which was four times higher than zeolite and three times higher than biochar under the same conditions. The mechanism investigations revealed that electrostatic interactions between the negatively charged CDs and the positively charged ammonium played a key role in the adsorption. In 30-day leaching experiments, the fabricated composite cumulatively reduced ammonium and nitrate by 6.3% and 9.7%, respectively at a dosage of 0.1% (w/w). Incubation experiments further confirmed that the developed composite could effectively inhibit ammonia volatilization and nitrification by immobilizing the ammonium within soil matrices. Our results demonstrated that CDs@Ca/Al-LDHs represented a promising candidate for cost-effective and eco-friendly immobilization of excess ammonium from over-fertilized farmland.

Mechanisms of adsorption and functionalization of biochar for pesticides: A review

Agricultural production relies heavily on pesticides. However, factors like inefficient application, pesticide resistance, and environmental conditions reduce their effective utilization in agriculture. Subsequently, pesticides transfer into the soil, adversely affecting its physicochemical properties, microbial populations, and enzyme activities. Different pesticides interacting can lead to combined toxicity, posing risks to non-target organisms, biodiversity, and organism-environment interactions. Pesticide exposure may cause both acute and chronic effects on human health. Biochar, with its high specific surface area and porosity, offers numerous adsorption sites. Its stability, eco-friendliness, and superior adsorption capabilities render it an excellent choice. As a versatile material, biochar finds use in agriculture, environmental management, industry, energy, and medicine. Added to soil, biochar helps absorb or degrade pesticides in contaminated areas, enhancing soil microbial activity. Current research primarily focuses on biochar produced via direct pyrolysis for pesticide adsorption. Studies on functionalized biochar for this purpose are relatively scarce. This review examines biochar's pesticide absorption properties, its characteristics, formation mechanisms, environmental impact, and delves into adsorption mechanisms, functionalization methods, and their prospects and limitations.

Enhanced simultaneous removal of phosphate and ammonium from swine wastewater using magnetic magnesium-loaded Chinese herbal medicine residues: Performance, mechanism, and resource utilization

Magnetic magnesium (Mg)-loaded Chinese herbal medicine residues (MM-TCMRs) were fabricated to simultaneously remove and recover phosphate and ammonium from wastewater. The MM-TCMRs exhibited larger specific surfaces and rougher structures with massive spherical particles than those of original residues. They could be separated by adjusting the magnetic field. The phosphate and ammonium adsorption by MM-TCMRs were matched with the pseudo-second-order model, while the Langmuir model yielded the maximum adsorption capacities of 635.35 and 615.57 mg g-1, respectively. Struvite precipitation on the MM-TCMRs surface was the primary removal mechanism with electrostatic attraction, ligand exchange, intra-particle diffusion, and ion exchange also involved. The recyclability of MM-TCMRs confirmed their good structural stability. More importantly, the nutrient-loaded MM-TCMRs enhanced alfalfa growth and improved soil fertility in planting experiments. Collectively, the MM-TCMRs are promising candidates for nutrient removal and recovery from wastewater.

Adsorption recovery of phosphorus in contaminated water by calcium modified biochar derived from spent coffee grounds

Phosphate recovery from water is essential for reducing water eutrophication and alleviating the phosphorus resource crisis. In this study, spent coffee grounds and CaCl2 were used as raw materials and a modifier, respectively, to create a novel calcium modified biochar (MBC) for removing phosphorus from water. The modified biochar (MBC) was the best at removing phosphorous when the modifier concentration was 1.5 M with theoretically maximum adsorption capacity of 70.26 mg/g. MBC also performed well in the wide pH range of 3-11 under different phosphorus concentration gradients, with phosphorus removal efficiency of more than 50 %. According to kinetic analysis, the adsorption process at low phosphorus concentrations (50-100 mg/L) can be more properly described by the pseudo-first-order model, while the pseudo-second-order model best describes the adsorption process at high concentrations (200-600 mg/L). The thermodynamic analysis indicated that the adsorption process was spontaneous and endothermic. Characterization results revealed that surface precipitation, complexation, and ligand exchange were the dominant mechanisms of phosphorus adsorption. MBC has great potential to recover phosphorus from wastewater.

Recent advances and future perspective on lignocellulose-based materials as adsorbents in diverse water treatment applications

The growing shortage of non-renewable resources and the burden of toxic pollutants in water have gradually become stumbling blocks in the path of sustainable human development. To this end, there has been great interest in finding renewable and environmentally friendly materials to promote environmental sustainability and combat harmful pollutants in wastewater. Of the many options, lignocellulose, as an abundant, biocompatible and renewable material, is the most attractive candidate for water remediation due to the unique physical and chemical properties of its constituents. Herein, we review the latest research advances in lignocellulose-based adsorbents, focusing on lignocellulosic composition, material modification, application of adsorbents. The modification and preparation methods of lignin, cellulose and hemicellulose and their applications in the treatment of diverse contaminated water are systematically and comprehensively presented. Also, the detailed description of the adsorption model, the adsorption mechanism and the adsorbent regeneration technique provides an excellent reference for understanding the underlying adsorption mechanism and the adsorbent recycling. Finally, the challenges and limitations of lignocellulosic adsorbents are evaluated from a practical application perspective, and future developments in the related field are discussed. In summary, this review offers rational insights to develop lignocellulose-based environmentally-friendly reactive materials for the removal of hazardous aquatic contaminants.

Integrated Analysis of Metabolome and Transcriptome Reveals Insights for Low Phosphorus Tolerance in Wheat Seedling

Low phosphorus (LP) stress leads to a significant reduction in wheat yield, primarily in the reduction of biomass, the number of tillers and spike grains, the delay in heading and flowering, and the inhibition of starch synthesis and grouting. However, the differences in regulatory pathway responses to low phosphorus stress among different wheat genotypes are still largely unknown. In this study, metabolome and transcriptome analyses of G28 (LP-tolerant) and L143 (LP-sensitive) wheat varieties after 72 h of normal phosphorus (CK) and LP stress were performed. A total of 181 and 163 differentially accumulated metabolites (DAMs) were detected for G28CK vs. G28LP and L143CK vs. L143LP, respectively. Notably, the expression of pilocarpine (C07474) in G28CK vs. G28LP was significantly downregulated 4.77-fold, while the expression of neochlorogenic acid (C17147) in L143CK vs. L143LP was significantly upregulated 2.34-fold. A total of 4023 differentially expressed genes (DEGs) were acquired between G28 and L143, of which 1120 DEGs were considered as the core DEGs of LP tolerance of wheat after LP treatment. The integration of metabolomics and transcriptomic data further revealed that the LP tolerance of wheat was closely related to 15 metabolites and 18 key genes in the sugar and amino acid metabolism pathway. The oxidative phosphorylation pathway was enriched to four ATPases, two cytochrome c reductase genes, and fumaric acid under LP treatment. Moreover, PHT1;1, TFs (ARFA, WRKY40, MYB4, MYB85), and IAA20 genes were related to the Pi starvation stress of wheat roots. Therefore, the differences in LP tolerance of different wheat varieties were related to energy metabolism, amino acid metabolism, phytohormones, and PHT proteins, and precisely regulated by the levels of various molecular pathways to adapt to Pi starvation stress. Taken together, this study may help to reveal the complex regulatory process of wheat adaptation to Pi starvation and provide new genetic clues for further study on improving plant Pi utilization efficiency.

Adsorption characteristics and mechanism of ammonia nitrogen and phosphate from biogas slurry by Ca2+-modified soybean straw biochar

The utilization of biogas slurry is critical for the sustainable development of animal husbandry. Biomass carbon adsorption is a feasible method for the recycling of nutrients from biogas slurry. However, research on the co-adsorption of ammonia nitrogen and phosphate is scarce. Herein, soybean straw was utilized as the raw material to prepare Ca2+-modified biochar (CaSSB), which was investigated for its ammonia nitrogen and phosphate adsorption mechanisms. Compared with natural biochar (SSB), CaSSB possesses a high H/C ratio, larger surface area, high porosity and various functional groups. Ca2+-modified soybean straw biochar exhibited excellent adsorption performance for NH4+-N (103.18 mg/g) and PO43--P (9.75 mg/g) at pH = 6, using an adsorbent dosage of 2 g/L. The experimental adsorption data of ammonia nitrogen by CaSSB corresponded to pseudo-second-order kinetics and the Langmuir isotherm model, suggesting that the adsorption process was homogeneous and that electrostatic attraction might be the primary adsorption mechanism. Meanwhile, the adsorption of phosphate conformed to pseudo-second-order kinetics and the Langmuir-Freundlich model, whose mechanism might be attributed to ligand exchange and chemical precipitation. These results reveal the potential of CaSSBs as a cost-effective, efficient adsorbent for the recovery of ammonium and phosphate from biogas slurry.

Simultaneous immobilization of heavy metals and nutrient elements in contaminated sediment using a novel composite agent product

In this research, an innovative type of sediment resource treatment agent (SRA) was synthesized successfully, which could immobilize ammonia nitrogen (NH₃-N), total phosphorus (TP), potassium (K), and simultaneously stabilize cadmium (Cd), lead (Pb), chromium (Cr), copper (Cu), nickel (Ni), and zinc (Zn) in dredged sediment. The effects of SRA dosage on stabilizing the nutrient elements and heavy metals were investigated. The results demonstrated that the increase of SRA dosage significantly enhanced the stabilization of nutrients and heavy metals. The 14-day rainwater infiltration and rainwater scouring experiments were carried out. With the simulation test of rainwater infiltration, the stabilization ratios of Cr, Cu, Ni, Pb, Zn, Cd, NH₃-N, TP, and K with 2% SRA addition reached 80.8%, 76.8%, 80.3%, 77.5%, 78.0%, 72.7%, 64.3%, 73.9%, and 73.9%, respectively. Under the action of rainwater scouring, the stabilization ratios of Cr, Cu, Ni, Pb, Zn, Cd, NH3-N, TP, and K with 6.4% SRA addition reached 84.6%, 84.0%, 77.6%, 87.3%, 80.0%, 61.5%, 76.2%, 77.8%, and 91.7%, respectively. Therefore, the results demonstrate that SRA is an excellent composite material in stabilizing heavy metals while reserving the nutrients in dredged sediment, thus showing great potential in the application for dredged sediment resource treatment.

Performance and mechanism of phosphorus adsorption removal from wastewater by a Ce-Zr-Al composite adsorbent

With the increasingly serious eutrophication of global water bodies and the strict discharge standards of tail water in wastewater treatment plants (WWTPs), there is an urgent technology need for efficient deep phosphorus removal from wastewater. A composite cerium-based adsorbent (Ce-Zr-Al) was synthesized by coprecipitation method for the adsorption of low concentration phosphorus in water. The performance of the Ce-Zr-Al composite adsorbent was explored, and the mechanism was also revealed through the analyses including SEM, BET, XPS, and FT-IR. The results showed that the composite adsorbent had excellent phosphorus removal performance. The phosphorus removal rate reached up to 92.6%, and the phosphorus concentration in effluent was less than 0.074 mg/L. The phosphate adsorption capacity of saturation was 73.51 mg/g. The adsorption process of phosphate was in accordance with pseudo-second-order kinetic model and Langmuir model. In addition, the composite adsorbent had a high zero potential point (pH _PZC= 8) and a wide range of pH application. After the repeated desorption for 10 times in NaOH solution, the composite adsorbent still maintained good adsorbability (adsorption rate > 94%). The ligand exchange and electrostatic adsorption played the main role for the phosphorus removal from water using the composite adsorbent.

Recent developments in metallic-nanoparticles-loaded biochars synthesis and use for phosphorus recovery from aqueous solutions. A critical review

Phosphorus (P) represents a major pollutant of water resources and at the same time a vital element for human and plants. P recovery from wastewaters and its reuse is a necessity in order to compensate the current important depletion of P natural reserves. The use of biochars for P recovery from wastewaters and their subsequent valorization in agriculture, instead of synthetic industrial fertilizers, promotes circular economy and sustainability concepts. However, P retention by pristine biochars is usually low and a modification step is always required to improve their P recovery efficiency. The pre- or post-treatment of biochars with metal salts seems to be one of the most efficient approaches. This review aims to summarize and discuss the most recent developments (from 2020- up to now) in: i) the role of the feedstock nature, the metal salt type, the pyrolysis conditions, and the experimental adsorption parameters on metallic-nanoparticles-loaded biochars properties and effectiveness in recovering P from aqueous solutions, as well as the dominant involved mechanisms, ii) the effect of the eluent solutions nature on the regeneration ability of P-loaded biochars, and iii) the practical challenges facing the upscaling of P-loaded biochars production and valorization in agriculture. This review shows that the synthesized biochars through slow pyrolysis at relatively high temperatures (up to 700-800 °C) of mixed biomasses with Ca- Mg-rich materials or impregnated biomasses with specific metals in order to from layered double hydroxides (LDHs) biochars composites exhibit interesting structural, textural and surface chemistry properties allowing high P recovery efficiency. Depending on the pyrolysis's and adsorption's experimental conditions, these modified biochars may recover P through combined mechanisms including mainly electrostatic attraction, ligand exchange, surface complexation, hydrogen bonding, and precipitation. Moreover, the P-loaded biochars can be used directly in agriculture or efficiently regenerated with alkaline solutions. Finally, this review emphasizes the challenges concerning the production and use of P-loaded biochars in a context of circular economy. They concern the optimization of P recovery process from wastewater in real-time scenarios, the reduction of energy-related biochars production costs and the intensification of communication/dissemination campaigns to all the concerned actors (i.e., farmers, consumers, stakeholders, and policymakers) on the benefits of P-loaded biochars reuse. We believe that this review is beneficial for new breakthroughs on the synthesis and green application of metallic-nanoparticles-loaded biochars.

Detection and removal technologies for ammonium and antibiotics in agricultural wastewater: Recent advances and prospective

With the extensive development of industrial livestock and poultry production, a considerable part of agricultural wastewater containing tremendous ammonium and antibiotics have been indiscriminately released into the aquatic systems, causing serious harms to ecosystem and human health. In this review, ammonium detection technologies, including spectroscopy and fluorescence methods, and sensors were systematically summarized. Antibiotics analysis methodologies were critically reviewed, including chromatographic methods coupled with mass spectrometry, electrochemical sensors, fluorescence sensors, and biosensors. Current progress in remediation methods for ammonium removal were discussed and analyzed, including chemical precipitation, breakpoint chlorination, air stripping, reverse osmosis, adsorption, advanced oxidation processes (AOPs), and biological methods. Antibiotics removal approaches were comprehensively reviewed, including physical, AOPs, and biological processes. Furthermore, the simultaneous removal strategies for ammonium and antibiotics were reviewed and discussed, including physical adsorption processes, AOPs, biological processes. Finally, research gaps and the future perspectives were discussed. Through conducting comprehensive review, future research priorities include: (1) to improve the stabilities and adaptabilities of detection and analysis techniques for ammonium and antibiotics, (2) to develop innovative, efficient, and low cost approaches for simultaneous removal of ammonium and antibiotics, and (3) to explore the underlying mechanisms that governs the simultaneous removal of ammonium and antibiotics. This review could facilitate the evolution of innovative and efficient technologies for ammonium and antibiotics treatment in agricultural wastewater.

A critical review on the development of lanthanum-engineered biochar for environmental applications

Biochar and lanthanum (La) have been widely used in environment. However, there is a lack of knowledge and perspective on the development of La-engineered biochar (LEB) for environmental applications. This review shows that LEBs with a variety of La species via pre-/post-doping routes are developed for environmental applications. Specifically, precipitation, gelation, and calcination are the common sub-processes involved in the pre-/post-doping of La on the resultant LEB. The dominant La species for LEBs is La(OH)₃, which is formed through precipitation of La ions with various bases. Various La carbonates, e.g., LaOHCO₃, La₂(CO₃)₃, La₂CO₅, and NaLa(CO₃)₂, are also involved in the preparation of LEBs. The LEBs are high-efficient in the adsorption of phosphate, arsenic, antimonate and fluoride ions, attributed to the strong affinity of La to oxyanions and Lewis hard base. Lanthanum is also favorable for co-doping with transition metal species to further enhance the performances in adsorption or catalysis. This review also analyzes the prospects and future challenges for the preparation and application of LEBs in environment. Finally, this review is beneficial to inspire new breakthroughs on the preparation and environmental application of LEBs.

Citrus fruit residues as alternative precursors to developing H2O and CO2 activated carbons and its application for Cu(II) adsorption

Due to its toxicity, the presence of Cu(II) ions released in aquatic environments presents a serious threat to the environment and human health. In search of sustainable and low-cost alternatives, there are citrus fruit residues, which are generated in large quantities by the juice industries and can be used to produce activated carbons. Therefore, the physical route was investigated for producing activated carbons to reuse citrus wastes. In this work, eight activated carbons were developed, varying the precursor (orange peel-OP, mandarine peel-MP, rangpur lime peel-RLP, and sweet lime peel-SLP) and the activating agent (CO₂ and H₂O) to remove Cu(II) ions of the aqueous medium. Results revealed promising activated carbons with a micro-mesoporous structure, a specific surface area of around 400 m² g^-1, and a pore volume of around 0.25 cm³ g^-1. In addition, Cu (II) adsorption was favored at pH 5.5. The kinetic study showed that the equilibrium was reached within 60 min removing about 80% of Cu(II) ions. The Sips model was the most suitable for the equilibrium data, providing maximum adsorption capacities (qmS) values of 69.69, 70.27, 88.04, 67.83 mg g^-1 for activated carbons (AC-CO₂) from OP, MP, RLP, and SLP, respectively. The thermodynamic behavior showed that the adsorption process of Cu(II) ions was spontaneous, favorable, and endothermic. It was suggested that the mechanism was controlled by surface complexation and Cu²⁺-π interaction. Desorption was possible with an HCl solution (0.5 mol L^-1). From the results obtained in this work, it is possible to infer that citrus residues could be successfully converted into efficient adsorbents to remove Cu(II) ions from aqueous solutions.

Nitrogen availability in biochar-based fertilizers depending on activation treatment and nitrogen source

Different activation and N-doping treatments were used to produce biochar-based fertilizers (BBFs) with increased N concentration and slow N release. Pristine biochars were produced by pyrolysis of olive tree pruning feedstock at low and high temperatures (400 and 800 °C). These biochars were activated either by ultrasonication, or oxidation with hydrogen peroxide (H₂O₂) or nitric acid (HNO₃) to increase their N retention potential. Subsequently biochars were enriched with N with either urea or ammonium sulfate. The activation of low-temperature biochars with HNO₃ was the most effective treatment leading to new surface carboxylic groups that facilitated the later enrichment with N. When treated with urea, BBFs reached 7.0 N%, whereas the H₂O₂ activation only allowed an increase up to 2.0 N%. The use of urea as the external N source was the most efficient for incorporating N. Urea treated biochars had a water-soluble fraction that represented up to 14.5 % of the total N. The hydrolyzable N fraction, composed by amides and simple N heterocycles originated by the N-doping treatments, and nitro groups generated from HNO₃ activation, represented up to 60 % of the total N. This study relates the N chemical forms in the new BBFs to potential N availability in soil. The presence of water-soluble, hydrolyzable and non-hydrolyzable N implied that these BBFs may supply N that would be progressively available for plants, acting as slow-release fertilizers.

Risk assessment of Artemia egg shell-Mg-P composites as a slow-release phosphorus fertilizer during its formation and application in typical heavy metals contaminated environment

Artemia egg shell loaded with nano-magnesium (shell-Mg) can be used to recover phosphorus from wastewater. The exhausted Artemia egg shell-Mg (denoted as shell-Mg-P) can be used as a slow-release fertilizer for phosphorus reuse. However, due to the coexistence of heavy metal ions in the environment, the application of slow-release fertilizer for phosphorus removal and reuse may have potential risks. In this paper, the potential risks of Pb²⁺, Cd²⁺, Zn²⁺ and Cu²⁺ in phosphorus wastewater and soil were studied from the formation and application process of shell-Mg-P. The result showed that shell-Mg adsorbed Pb²⁺, Cd²⁺, Zn²⁺ and Cu²⁺ in phosphate wastewater during the formation of shell-Mg-P and became shell-Mg-P-metal hybrid biomaterial. Although the experiment proved that the existence of heavy metal ions did not affect the phosphorus slow-release behavior of slow-release fertilizer, but the heavy metal ions in the shell-Mg-P-metal were also slow released. The pot experiment results confirmed that the slow-release phosphorus fertilizers (shell-Mg-P and shell-Mg-P-metal) in the soil polluted in low concentration of heavy metals can reduce the amount of heavy metals in whole wheat seedlings and promote wheat seedling growth. However, the application of slow-release fertilizers increased the translocation efficiency (T_{FR to SL}) of metal from root (R) to aboveground part (stem and leaves, SL), promoted the transportation of heavy metals from roots to the stems and leaves, and increased the safety risk of the wheat seedling edible. Therefore, besides the positive role of slow-release fertilizers in retaining heavy metals and reducing the amount of heavy metals in whole seedlings, the risk that it may aggravate the translocation of heavy metals to stems and leaves should be paid more attention, so as to ensure the safe and reliable application of slow-release fertilizers.

Characteristic of KMnO4-modified corn straw biochar and its application in constructed wetland to treat city tail water

Biochar prepared from straw as constructed wetland (CW) substrate reduces straw pollution and simultaneously promotes the wastewater treatment efficiency of CW. In order to further analyze the pollutant removal mechanism of KMnO₄-modified biochar substrate, the KMnO₄-modified biochar was characterized. The experiment on city tail water treatment by CW with biochar was analyzed. The research showed that the surface property improvement on KMnO₄ (0.1 mol/L)-modified biochar was the most obvious. The biochar modified by 0.1 mol/L KMnO₄ increased the SSA and the number of oxygen functional groups and alcohol hydroxyl. KMnO₄-modified biochar improved the removal efficiency of NO₃^--N in CW. KMnO₄-modified biochar substrate with plants improved the TP removal efficiency (about 45%). KMnO₄ as modifier reduced the influence of biochar on electrical conductivity tracing experiment. This study will improve the utilization value of straw and the removal efficiency of CW.

Remediation competence of nanoparticles amalgamated biochar (nanobiochar/nanocomposite) on pollutants: A review

Advanced biochar blended nanoparticles substances, such as nano biochar or nanocomposites, have provided long-term solutions to a wide range of modern-day problems. Biochar blended nano-composites can be created to create better composite materials that combine the benefits of biochar and nanoparticles. Such materials have been typically improved with active functional groups, porous structure, active surface area, catalytic deterioration ability, as well as easy recovery or separation of pollutants. Such biochar-basednanocomposites have good adsorption properties for a variety of pollutants in various form of polluted medium (soil and water contamination). Catalytic nanoparticle encapsulated biochar, can perform concurrently the adsorption (by biochar) as well as catalytic degradation (nanoparticles) functions for pollutants removal from polluted sites. In this review, the advanced and practically feasible techniques involved in the biochar blended nanoparticles-based nanocomposites have been discussed with environmental applications. Furthermore, the mechanisms involved in this composite material in remediation, as well as the advantages and disadvantages of biochar blended nanoparticles-based nanocomposites, were discussed, and future directions for study in this field were suggested.

Closing the Nutrient Loop-The New Approaches to Recovering Biomass Minerals during the Biorefinery Processes

The recovery of plant mineral nutrients from the bio-based value chains is essential for a sustainable, circular bioeconomy, wherein resources are (re)used sustainably. The widest used approach is to recover plant nutrients on the last stage of biomass utilization processes-e.g., from ash, wastewater, or anaerobic digestate. The best approach is to recover mineral nutrients from the initial stages of biomass biorefinery, especially during biomass pre-treatments. Our paper aims to evaluate the nutrient recovery solutions from a trans-sectorial perspective, including biomass processing and the agricultural use of recovered nutrients. Several solutions integrated with the biomass pre-treatment stage, such as leaching/bioleaching, recovery from pre-treatment neoteric solvents, ionic liquids (ILs), and deep eutectic solvents (DESs) or integrated with hydrothermal treatments are discussed. Reducing mineral contents on silicon, phosphorus, and nitrogen biomass before the core biorefinery processes improves processability and yield and reduces corrosion and fouling effects. The recovered minerals are used as bio-based fertilizers or as silica-based plant biostimulants, with economic and environmental benefits.

Pilot-scale phosphate recovery from wastewater to create a fertiliser product: An integrated assessment of adsorbent performance and quality

Eutrophication and the predicted limited future availability of rock phosphate has triggered the increased development of phosphorus (P) recovery technologies, however, for remote regions, recovery solutions are still limited. Here, we report on a novel pilot-scale technology (FILTRAFLO^TM-P reactor) to recover phosphate (PO₄^3-) from wastewater effluent through a filtration/adsorption process in a rural setting. This unit employs enhanced gravitational filtration through adsorption media (here, a novel KOH deacetylated crab carapace based chitosan-calcite material (CCM)) with continuous self-backwashing. Trials were designed to assess how the FILTRAFLO^TM-P unit would operate under 'real' conditions (both at low and high PO₄^3- levels), and to ascertain the effectiveness of the adsorbent to recover phosphate from final effluent. High removal was achieved at low phosphate concentrations, bringing the residual effluent PO₄^3- level below 1 mg/L (EU limit for sensitive water bodies), while phosphate was efficiently harvested (at more than 50%) at higher PO₄^3- levels. Surface microprecipitation and inner-sphere complexation were postulated as the main PO₄^3- adsorption mechanisms through XRD, XPS and EDX elemental mapping. Further, a quality assessment of the P-enriched CCM (which could be used as a potential soil amendment) was undertaken to consider elemental composition, microbiological assessment and quantification of organic micropollutants. Quality analysis indicated ∼2.5% P₂O₅ present, trace levels (well below legislative limits) of heavy metals and extremely low levels of organic pollutants (e.g., PCBs, pharmaceuticals). No detectable levels of target bacterial pathogens were observed. Pot trials showed that ryegrass cultivated with the addition of the CCM adsorbent achieved higher plant dry matter and P concentration when compared to unfertilised controls, with a slow-release kinetic pattern. This study showed that CCM used with the FILTRAFLO^TM-P pilot reactor has high potential to recover phosphate from effluents and encourage resource recovery via bio-based management of waste.

Phosphate Removal Mechanisms in Aqueous Solutions by Three Different Fe-Modified Biochars

Iron-modified biochar can be used as an environmentally friendly adsorbent to remove the phosphate in wastewater because of its low cost. In this study, Fe-containing materials, such as zero-valent iron (ZVI), goethite, and magnetite, were successfully loaded on biochar. The phosphate adsorption mechanisms of the three Fe-modified biochars were studied and compared. Different characterization methods, including scanning electron microscopy/energy-dispersive spectrometry (SEM-EDS), Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS), were used to study the physicochemical properties of the biochars. The dosage, adsorption time, pH, ionic strength, solution concentration of phosphate, and regeneration evaluations were carried out. Among the three Fe-modified biochars, biochar modified by goethite (GBC) is more suitable for phosphate removal in acidic conditions, especially when the pH = 2, while biochar modified by ZVI (ZBC) exhibits the fastest adsorption rate. The maximum phosphate adsorption capacities, calculated by the Langmuir-Freundlich isothermal model, are 19.66 mg g^-1, 12.33 mg g^-1, and 2.88 mg g^-1 for ZBC, GBC, and CSBC (biochar modified by magnetite), respectively. However, ZBC has a poor capacity for reuse. The dominant mechanism for ZBC is surface precipitation, while for GBC and CSBC, the major mechanisms are ligand exchange and electrostatic attraction. The results of our study can enhance the understanding of phosphate removal mechanisms by Fe-modified biochar and can contribute to the application of Fe-modified biochar for phosphate removal in water.

Biochar for the removal of contaminants from soil and water: a review

Biochar shows significant potential to serve as a globally applicable material to remediate water and soil owing to the extensive availability of feedstocks and conducive physio-chemical surface characteristics. This review aims to highlight biochar production technologies, characteristics of biochar, and the latest advancements in immobilizing and eliminating heavy metal ions and organic pollutants in soil and water. Pyrolysis temperature, heat transfer rate, residence time, and type of feedstock are critical influential parameters. Biochar’s efficacy in managing contaminants relies on the pore size distribution, surface groups, and ion-exchange capacity. The molecular composition and physical architecture of biochar may be crucial when practically applied to water and soil. In general, biochar produced at relatively high pyrolysis temperatures can effectively manage organic pollutants via increasing surface area, hydrophobicity and microporosity. Biochar generated at lower temperatures is deemed to be more suitable for removing polar organic and inorganic pollutants through oxygen-containing functional groups, precipitation and electrostatic attraction. This review also presents the existing obstacles and future research direction related to biochar-based materials in immobilizing organic contaminants and heavy metal ions in effluents and soil.

Graphical Abstract

Characteristics and Mechanisms of Phosphorous Adsorption by Peanut Shell-Derived Biochar Modified with Magnesium Chloride by Ultrasonic-Assisted Impregnation

Recovery of phosphate (P) from sludge, domestic wastewater, and industrial wastewater is beneficial for overcoming the problem of shortage of P rock resources. In this study, Mg-functionalized peanut shell-derived biochar was prepared by ultrasound-assisted impregnation. The obtained Mg-laden biochar had a higher content of Mg, a larger specific surface area, and more porosity. The prepared Mg-modified biochar exhibited excellent adsorption properties of phosphorus. Modified biochar has a higher amount of adsorbed P than raw biochar. The capacity of P adsorption by modified biochar was 30.48-114.24% higher than that by raw biochar. Moreover, the Mg-laden biochar can be applied in a wide working environment (pH: 2-10; temperature range: 15-40 °C). This study not only develops a new strategy for the preparation of high-capacity P adsorbents but also provides a new green use for agricultural peanut shells.

Novel ecological ditch system for nutrient removal from farmland drainage in plain area: Performance and mechanism

The loading of nitrogen (N) and phosphorus (P) from agricultural drainage as the non-point sources is a worldwide environmental issue for aquatic ecosystem. However, how to remove these nutrients effectively from agricultural drainage remains a big challenge with increasing cemented ditches for better management. Here, we designed a novel ecological ditch system which integrated an earth ditch and a cemented ditch with iron-loaded biochar in the Chengdu Plain to reduce the loss of N and P from farmland. After a two-year monitoring, the removal efficiency of total N and total P reached 24.9% and 36.1% by the earth ditch and 30.7% and 57.8% by the integrated ditch system, respectively. The water quality was evidently improved after passing through the ditch system with the marked decrease in the concentrations of N and P. Dissolved organic N, nitrate, and particulate P became the dominant fractions of N and P loss. Rainfall soon after fertilization increased the concentrations of N and P in the ditch system and markedly affected their removal efficiency. The iron-loaded biochar effectively removed N and P from the drainage, especially at the high concentrations, which was mainly attributed to its high adsorption of the dissolved N and P fractions and the interception of the particulate nutrients. Our results indicate that the designed ecological ditch system has a high potential for alleviating agricultural non-point source pollution in the plain area and can be extended to other lowland agricultural ecosystems.

Sustainable use of Ca(OH)2 modified biochar for phosphorus recovery and tetracycline removal from water

To prevent possible secondary pollution from phosphorus-loaded biochar (BC) in agricultural systems, this study investigated the sustainable use of Ca(OH)₂ modified wood biochars (Ca-BCs) for P recovery while significantly lowering the tetracycline (TC) adsorption onto Ca-BCs. Ca-BCs were prepared via calcination of mixtures of Ca(OH)₂ and wood BC under 100-500 °C for removing P and TC from water. Compared to the pristine BC (without Ca(OH)₂ modification), Ca-BC100 (Ca-BC prepared at 100 °C) showed a significant increase of P adsorption capacity from 4.00 to 138.70 mg/g due to reactive interaction between P and Ca(OH)₂ on Ca-BC while decrease of TC adsorption capacity from 62.17 to 20.86 mg/g owing to decrease of surface area from 260.50 to 120.26 m²/g. Batch adsorption tests implied that the P adsorption on Ca-BC100 would occur mainly via electrostatic attraction (pH > 2.1) and formation of hydroxylapatite (Ca₅(PO₄)₃(OH)) between phosphate and Ca(OH)₂. In addition, Ca-BC100 reacted with TC via electrostatic attraction (pH > 7.6), complexation, hydrogen bond, and π-π interactions. P and TC adsorption onto Ca-BC100 was a chemical, endothermic, and spontaneous process. The dynamic adsorption experiments using a fixed bed column filled with Ca-BC100 indicated that Ca-BC100 could continuously and effectively remove P and TC from water. Ca-BC100 also effectively lowered P and COD in the dairy wastewater. Under the environmentally relevant conditions, continuous treatment of water containing P and TC using the pristine BC followed by Ca-BC100 showed the pristine BC removed 96% of TC and only 6% of P from water while Ca-BC100 made high recovery of P (94% of P) with negligible TC. Therefore, Ca-BC100 could be used for effective recovery of P with negligible TC from wastewater, and then applied to agricultural systems as a sustainable and safe P-rich biofertilizer.

A Novel Ca-Modified Biochar for Efficient Recovery of Phosphorus from Aqueous Solution and Its Application as a Phosphorus Biofertilizer

Recovery phosphorus (P) from P-contaminated wastewater is an efficient and environmentally friendly mean to prevent water pollution and alleviate the P shortage crisis. In this study, oyster shell as calcium sources and peanut shells as carbon sources (mass ratio 1:1) were used to prepare a novel Ca-modified biochar (OBC) via co-pyrolysis, and its potential application after P adsorption as a P biofertilizer for soil was also investigated. The results shown that OBC had a remarkable P adsorption capacity from wastewater in a wide range of pH 4−12. The maximum P adsorption capacity of OBC was about 168.2 mg/g with adsorbent dosage 1 g/L, which was about 27.6 times that of the unmodified biochar. The adsorption isotherm and kinetic data were better described by Langmuir isotherm model (R2 > 0.986) and the pseudo second-order model (R2 > 0.975), respectively. Characterization analysis of OBC before and after P adsorption by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and specific surface area and porosity analyzer (BET) indicated that the remarkable P adsorption capacity of OBC was mainly ascribed to chemical precipitation, electrostatic adsorption, and hydrogen bonding. Pot experiment results showed that OBC after P adsorption could significantly promote the germination and growth of Spinacia, which manifested that OBC after P adsorption exhibited a good ability to be reused as P fertilizer for soil.

Environmental application of engineering magnesite slag for phosphate adsorption from wastewater

Herein, magnesite slags (MS), which remain after sulfuric acid extraction from light burnt magnesite in the magnesite industry, were used as phosphate adsorbents in wastewater. The MS were calcined under 700 °C to enhance phosphate adsorption. The calcined magnesite slags (CMS) were characterized by nitrogen adsorption-desorption isotherm, X-ray diffraction, and scanning electron microscopy. A series of batch adsorption experiments were carried out to test the phosphate adsorption capacity of CMS. The results showed that the calcific treatment promoted the conversion from Mg, Ca, Fe, etc. compound to metal oxide of the MS. The generated metal oxide particles resulted in 237.4 mg/g increase in the phosphate adsorption capacity. The phosphate adsorption isotherm of CMS fitted the Langmuir model better, and the maximum adsorption capacity of CMS was 526 mg/g. The adsorption kinetics of phosphate on CMS can be described by the pseudo-second-order model. The phosphate removal efficiency was greater than 98% in 300 mg/L phosphate solution. Mechanism investigation results indicated that phosphate was adsorbed by CMS through MgO protonation, electrostatic attraction, Mg-P complexation, and ligand exchange. The results obtained in this work demonstrate that the CMS is a potential effective adsorbent for removal and reutilization phosphate from P-contaminated water, due to it can be employed as a fertilizer after phosphate adsorption.

Increasing the hydrophyte removal rate of dissolved inorganic phosphorus using a novel Fe-Mg-loaded activated carbon hydroponic substrate with adsorption-release dual functions

At present, the plant floating bed is mostly used to remediate aquaculture tail water since its obvious advantage of eco-friendly. However, there is still the problem of low phosphorus removal efficiency due to the balance between the floating bed coverage area and the aquaculture area, as well as the phosphorus content fluctuation in water. To solve this problem, a phosphorus-controlling hydroponic substrate prepared from granular activated carbon loaded with nanoiron-magnesium hydroxide (AC-Fe-Mg) was prepared, and the phosphorus adsorption and slow-release performance of AC-Fe-Mg were evaluated. Moreover, the effect of the combination of AC-Fe-Mg and I. pseudacorus L. on phosphorus purification was studied. AC-Fe-Mg exhibited superior adsorption and release ability for phosphorus without substantial interference from coexisting substances such as Cl^-, NO₃^-, HCO₃^- and humic acid (HA) within the pH range of 5-9. Finally, the phosphorus removal rate reached 98.66% under the combined effect of I. pseudacorus L. and AC-Fe-Mg at the initial P concentration of 20 mg L^-1. At a high P-level, phosphorus was sequestered by AC-Fe-Mg and consumed as a growth nutrient by I. pseudacorus L. At a low P-level, phosphorus was released from AC-Fe-Mg and provided to I. pseudacorus L. The regulatory ability of AC-Fe-Mg can provide plants with continuous and stable phosphorus, and maintain the nitrogen-phosphorus ratio for plant demand. Thus, the dissolved inorganic phosphorus was controlled and efficiently removed. Accordingly, the novel AC-Fe-Mg with adsorption and slow-release dual functions can be used as a hydroponic substrate of emergent plants to improve water purification.

Purification mechanism of city tail water by constructed wetland substrate with NaOH-modified corn straw biochar

The pollution of corn straw to the environment had attracted much attention. The preparation and alkali modification of corn straw biochar as the constructed wetland (CW) substrate was conducive to solving the environment pollution caused by straw and improving the purification effect of CW. The NaOH modification mechanism of corn straw biochar was analyzed by measuring the surface morphology, element content, specific surface area (SSA), pore volume, crystal structure, surface functional groups and CO₂ adsorption. Biochar prepared under relatively optimal NaOH-modified conditions was used as the vertical flow CW substrate to treat city tail water. The results showed that controlling the modification condition of NaOH (< 1.0 mol·L^-1, ≤ 24 h) was conducive to prevent the biochar structure destruction and C element reduction. The SSA and pore volume of NaOH (0.1 mol·L^-1) modified biochar are 360 m²·g^-1 and 0.109 cm³·g^-1, respectively. The biochar adsorption for CO₂ conformed to the Langmuir and Freundlich isothermal adsorption theoretical model (R² > 0.9). The maximum adsorption capacity of CO₂ by modified biochar with NaOH (0.1 mol·L^-1) was 64.516 cm³·g^-1 and increased by 10.3%. The city tail water treated by CW with plants showed that the removal rates of ammonia nitrogen, total nitrogen and nitrate nitrogen reached about 90%. The research results improved the utilization value of straw, realized straw carbon sequestration and promoted the progress of CW technology.

Wood Biochar Enhances the Valorisation of the Anaerobic Digestion of Chicken Manure

In this study, the efficacy of biochar to mitigate ammonia stress and improve methane production is investigated. Chicken manure (CM) was subjected to high-solid mesophilic anaerobic digestion (15% total solid content) with wood biochar (BC). Wood biochar was further treated using HNO3 and NaOH to produce acid–alkali-treated wood biochar (TBC), with an improvement in its overall ammonium adsorption capacity and porosity. Three treatments were loaded in triplicate into the digesters, without biochar, with biochar and with acid–alkali-treated biochar and maintained at 37 °C for 110 days. The study found a significant improvement in CH4 formation kinetics via enhanced substrate degradation, leading to CH4 production of 74.7 mL g−1 VS and 70.1 mL g−1 VS by BC and TBC treatments, compared to 39.5 mL g−1 VS by control treatments on the 28th day, respectively. However, only the use of TBC was able to prolong methane production during the semi-inhibition phase. The use of TBC also resulted in the highest removal of total ammonia nitrogen (TAN) of 86.3%. In addition, the treatment with TBC preserved the highest microbial biomass at day 110. The presence of TBC also resulted in an increase in electrical conductivity, possibly promoting DIET-mediated methanogenesis. Overall, the acid–alkali treatment of biochar can be a novel approach to improve biochar’s existing characteristics for its utilisation as an additive in anaerobic digestion.

Selenium (Se) recovery for technological applications from environmental matrices based on biotic and abiotic mechanisms

Selenium (Se) is an essential element with application in manufacturing from food to medical industries. Water contamination by Se is of concern due to anthropogenic activities. Recently, Se remediation has received increasing attention. Hence, different types of remediation techniques are listed in this work, and their potential for Se recovery is evaluated. Sorption, co-precipitation, coagulation and precipitation are effective for low-cost Se removal. In photocatalytic, zero-valent iron and electrochemical systems, the above mechanisms occur with reduction as an immobilization and detoxification process. In combination with magnetic separation, the above techniques are promising for Se recovery. Biological Se oxyanions reduction has been widely recognized as a cost-effective method for Se remediation, simultaneously generating biosynthetic Se nanoparticles (BioSeNPs). Increasing the extracellular production of BioSeNPs and controlling their morphology will benefit its recovery. However, the mechanism of the microbial production of BioSeNPs is not well understood. Se containing products from both microbial reduction and abiotic methods need to be refined to obtain pure Se. Eco-friendly and cost-effective Se refinery methods need to be developed. Overall, this review offers insight into the necessity of shifting attention from Se remediation to Se recovery.

Lead adsorption and antibacterial activity using modified magnetic biochar/sodium alginate nanocomposite

Biochar is one of the most promising wastewater treatment materials. As shown in the Scanning Electron Micrograph, the magnetic biochar (BC) cross-linked glutaraldehyde (G) with sodium alginate (SA) (BC-G-SA) nanocomposite formed with uniform particle size without aggregation, and an X-Ray Diffraction study revealed that the BC-G-SA nanocomposite has an amorphous structure. The BC-G-SA nanocomposite enhanced the microwave adsorption process for Pb (II). The maximum metal capacity value was obtained using the microwave adsorption technique at pH 5.0 and contact time 20 s for Pb (II) at medium and low microwave power (940 and 1400 μmol g^-1, respectively). Pb (II) adsorption isotherm follows a pseudo-second-order model. Also, the BC-G-SA nanocomposite effectively inhibited bacterial growth throughout the growth kinetics experiment. BC-G-SA inhibited the growth of S. aureus at a MIC of 200 g mL^-1, whereas L. monocytogenes had a MIC of 200 g mL^-1. The MIC values for E. faecalis and E. faecium were significantly lower (50 and 100 g mL^-1, respectively).

Biochar application in biofiltration systems to remove nutrients, pathogens, and pharmaceutical and personal care products from wastewater

Although conventional on-site wastewater treatment systems (OWTSs) provide only primary treatment of domestic wastewater, removal of a limited level of nutrients (N, P), pathogens, and pharmaceuticals and personal care products (PPCPs) could be achieved by such a treatment process. Biochar has the capacity to remove various contaminants and has been widely used as an ideal soil amendment in agriculture due to its persistence, superior nutrient-retention properties, low cost, and ready availability. However, few applications on the use of biochar in onsite wastewater treatment have been explored. In this review, we systematically reviewed the applications of biochar in filtration-based OWTSs for nutrient (N, P) removal and recovery as well as pathogen and PPCP removal. Although adsorption was the main mechanism for P, pathogen, and PPCP removal, biochar can also serve as the growth media for enhanced biological degradation, improves available alkalinity, and increases water holding capacity in the OWTSs. The biochar source, surface modification methods, and preparation procedures (e.g., pyrolysis temperature change) have significant effects on contaminant removal performance in biochar-amended OWTSs. Specifically, contradictory results have been reported on the effect of pyrolysis temperature change on biochar removal performance (i.e., increased, decreased, or no change) of N, P, and PPCPs. Wastewater composition and environmental pH also play important roles in the removal of nutrients, pathogens, and PPCPs. Overall, biochar holds great potential to serve as an alternative filtration material or to be amended to the current OWTS to improve system performance in removing a variety of contaminants at low cost.

A state-of-the-art review on producing engineered biochar from shellfish waste and its application in aquaculture wastewater treatment

Global production of shellfish aquaculture is steadily increasing owing to the growing market demands for shellfish. The intensification of shellfish aquaculture to maximize production rate has led to increased generation of aquaculture waste streams, particularly the effluents and shellfish wastes. If not effectively managed, these wastes could pose serious threats to human health and the ecosystem while compromising the overall sustainability of the industry. The present work comprehensively reviews the source, composition, and environmental implications of shellfish wastes and aquaculture wastewater. Moreover, recent advancements in the valorization of shellfish wastes into value-added biochar via emerging thermochemical and modification techniques are scrutinized. The utilization of the produced biochar in removing emerging pollutants from aquaculture wastewater is also discussed. It was revealed that shellfish waste-derived biochar exhibits relatively higher adsorption capacities (300-1500 mg/g) compared to lignocellulose biochar (<200 mg/g). The shellfish waste-derived biochar can be effectively employed for the removal of various contaminants such as antibiotics, heavy metals, and excessive nutrients from aquaculture wastewater. Finally, future research priorities and challenges faced to improve the sustainability of the shellfish aquaculture industry to effectively support global food security are elaborated. This review envisages that future studies should focus on the biorefinery concept to extract more useful compounds (e.g., carotenoid, chitin) from shellfish wastes for promoting environmental-friendly aquaculture.

Biochar derived from fruit by-products using pyrolysis process for the elimination of Pb(II) ion: An updated review

Water pollution is one of the most concerning global environmental problems in this century with the severity and complexity of the issue increases every day. One of the major contributors to water pollution is the discharge of harmful heavy metal wastes into the rivers and water bodies. Without proper treatment, the release of these harmful inorganic waste would endanger the environment by contaminating the food chains of living organisms, hence, leading to potential health risks to humans. The adsorption method has become one of the cost-effective alternative treatments to eliminate heavy metal ions. Since the type of adsorbent material is the most vital factor that determines the effectiveness of the adsorption, continuous efforts have been made in search of cheap adsorbents derived from a variety of waste materials. Fruit waste can be transformed into valuable products, such as biochar, as they are composed of many functional groups, including carboxylic groups and lignin, which is effective in metal binding. The main objective of this study was to review the potential of various types of fruit wastes as an alternative adsorbent for Pb(II) removal. Following a brief overview of the properties and effects of Pb(II), this study discussed the equilibrium isotherms and adsorption kinetic by various adsorption models. The possible adsorption mechanisms and regeneration study for Pb(II) removal were also elaborated in detail to provide a clear understanding of biochar produced using the pyrolysis technique. The future prospects of fruit waste as an adsorbent for the removal of Pb(II) was also highlighted.

Sediment metals adhering to biochar enhanced phosphorus adsorption in sediment capping

Metal ions in sediment are inherent Ca and Fe sources for biochar modification. In this work, the effect of Ca²⁺ and Fe²⁺ released from sediment on biochar for phosphorus adsorption was evaluated. Results showed that raw peanut shell biochar (PSB) was poor in phosphorus adsorption (0.48 mg/g); sediment-triggered biochar (S-PSB) exhibited a P adsorption capacity of 1.32 mg/g in capping reactor and maximum adsorption capacity of 10.72 mg/g in the Langmuir model. Sediment released Ca²⁺ of 2.2-4.1 mg/L and Fe²⁺/Fe³⁺ of 0.2-9.0 mg/L. The metals loaded onto the biochar surface in the forms of Ca-O and Fe-O, with Ca and Fe content of 1.47 and 0.29%, respectively. Sediment metals made point of zero charge (pHpzc) of biochar shifted from 5.39 to 6.46. The mechanisms of enhanced P adsorption by S-PSB were surface complexation of CaHPO₄ followed by precipitation of Ca₃(PO₄)₂ and Ca₅(PO₄)₃(OH). Sediment metals induced the modification of biochar and improvement of P adsorption, which was feasible to overcome the shortcomings of biochar on phosphorus control in sediment capping.