Field study on the soil bacterial associations to combined contamination with heavy metals and organic contaminants

Ryegrass uptake behavior and forage risk assessment after exposing to soil with combined polycyclic aromatic hydrocarbons and cadmium

Internalization of chemicals and the forage risks of ryegrass under the combined exposure to PAHs and Cd at environmental concentrations were studied here. The effect of soil pH was also concerned due to the widely occurred soil acidification and general alkali remediation for acidification soil. Unexpectedly, as same as the acid-treated group (pH 6.77), the alkali-treatment (pH 8.83) increased Cd uptake compared with original soil pH group (pH 7.92) for the reason of CdOH+ and CdHCO3+ formed in alkali-treated group. Co-exposure to PAHs induced more oxidative stress than Cd exposure alone due to PAHs aggregated in young root regions, such as root tips, and consequently, affecting the expression of Cd-transporters, destroying the basic structure of plant cells, inhibiting the energy supply for the transporters, even triggering programmed cell death, and finally resulting in decreased Cd uptake. Even under environmental concentrations, combined exposure caused potential risks derived from both PAHs and Cd. Especially, ryegrass grown in alkali-treated soil experienced an increased forage risks despite the soil meeting the national standards for Cd at safe levels. These comprehensive results reveal the mechanism of PAHs inhibiting Cd uptake, improve the understanding of bioavailability of Cd based on different forms, provide a theoretical basis to formulate the safety criteria, and guide the application of actual soil management.

Metals and polycyclic aromatic hydrocarbons pollutants in industrial parks under valley landforms in Tibetan Plateau: Spatial pattern, ecological risk and interaction with soil microorganisms

The spatial patterns of pollutants produced by industrial parks are affected by many factors, but the interactions among polycyclic aromatic hydrocarbons (PAHs), metals, and soil microorganisms in the valley landforms of the Tibetan Plateau are poorly understood. Thus, this study systematically investigated the distribution and pollution of metals and PAHs in soil around an industrial park in the typical valley landform of the Tibetan Plateau and analyzed and clarified the interaction among metals, PAHs, and microorganisms. The results were as follows: metal and PAH concentrations were affected by wind direction, especially WN-ES and S-N winds; Cd (2.86-54.64 mg·kg-1) had the highest soil concentrations of the metals screened, followed by variable concentrations of Cu, Pb, and Zn; the pollution levels of metals and PAHs in the S-N wind direction were lower than those in the WN-ES wind direction; the Cd content of Avena sativa in the agricultural soil around the factory exceeded its enrichment ability and food safety standards; the closer to the center of the park, the higher the ecological risk of PAHs; and the TEQ and MEQ values of the PAHs were consistent with their concentration distributions. The results of the soil microbial diversity and co-occurrence network in the dominant wind direction showed that metal and PAH pollution weakened the robustness of soil microbial communities. Additionally, the diversity and robustness of soil microbial communities at the S wind site were higher than those at the ES wind site, which might be attributed to the lower metal content of the former than the latter, which plays a negative role in the biodegradation of PAHs. The results of this study provide insights into the site selection, pollutant supervision, and environmental remediation of industrial parks in typical landforms.

Using Network Analysis and Predictive Functional Analysis to Explore the Fluorotelomer Biotransformation Potential of Soil Microbial Communities

Microbial transformation of per- and polyfluoroalkyl substances (PFAS), including fluorotelomer-derived PFAS, by native microbial communities in the environment has been widely documented. However, few studies have identified the key microorganisms and their roles during the PFAS biotransformation processes. This study was undertaken to gain more insight into the structure and function of soil microbial communities that are relevant to PFAS biotransformation. We collected 16S rRNA gene sequencing data from 8:2 fluorotelomer alcohol and 6:2 fluorotelomer sulfonate biotransformation studies conducted in soil microcosms under various redox conditions. Through co-occurrence network analysis, several genera, including Variovorax, Rhodococcus, and Cupriavidus, were found to likely play important roles in the biotransformation of fluorotelomers. Additionally, a metagenomic prediction approach (PICRUSt2) identified functional genes, including 6-oxocyclohex-1-ene-carbonyl-CoA hydrolase, cyclohexa-1,5-dienecarbonyl-CoA hydratase, and a fluoride-proton antiporter gene, that may be involved in defluorination. This study pioneers the application of these bioinformatics tools in the analysis of PFAS biotransformation-related sequencing data. Our findings serve as a foundational reference for investigating enzymatic mechanisms of microbial defluorination that may facilitate the development of efficient microbial consortia and/or pure microbial strains for PFAS biotransformation.

Differences in soil bacterial community structure during the remediation of Cd-polluted cotton fields by biochar and biofertilizer in Xinjiang, China

Introduction

Heavy metal pollution is a major worldwide environmental problem. Many remediation techniques have been developed, these techniques have different performance in different environments.

Methods

In this study, soil sampling was conducted in multiple cotton fields in Xinjiang, China, and found that cadmium (Cd) was the most abundant soil heavy metal. Then, to find the most suitable technique for the remediation of Cd pollution in cotton fields, a two-year study was conducted to explore the effects of cotton straw-derived biochar (BC, 3%) and Bacillus-based biofertilizer (BF, 1.5%) on cotton Cd uptake and transport and soil microbial community structure under Cd exposure conditions (soil Cd contents: 1, 2, and 4 mg·kg-1).

Results

The results showed that the bioaccumulation coefficients (Cd content of cotton organs / soil available Cd content) of cotton roots, stems, leaves, and buds/bolls reduced by 15.93%, 14.41%, 23.53%, and 20.68%, respectively after the application of BC, and reduced by 16.83%, 17.15%, 22.21%, and 26.25%, respectively after the application of BF, compared with the control (no BC and BF). Besides, the application of BC and BF reduced the transport of Cd from soil to root system, and enhanced the diversity of soil bacterial communities (dominant species: Alphaproteobacteria and Actinobacteria) and the metabolic functions related to amino acid synthesis. It was worth noting that the differential species for BF group vs BC group including Alphaproteobacteria, Gemmatimonadetes, Bacilli, and Vicinamibacteria were associated with the enrichment and transport of Cd, especially the transport of Cd from cotton roots to stems.

Discussion

Therefore, the application of BC and BF changed the soil bacterial diversity in Cd-polluted cotton field, and then promoted the transport of Cd in cotton, ultimately improving soil quality. This study will provide a reference for the selection of soil heavy metal pollution remediation techniques in Xinjiang, China.

Microbial community structure and co-occurrence network stability in seawater and microplastic biofilms under prometryn pollution in marine ecosystems

Prometryn has been extensively detected in marine environment because of its widespread usage in agriculture and aquaculture and has been concerns since its serious effects on aquatic organisms. However, its impact on the microbial community in the marine ecosystem including seawater and biofilm is still unclear. Therefore, a short-term indoor microcosm experiment of prometryn exposure was conducted. This study found that prometryn had a more significant impact on the structure and stability of the microbial community in seawater compared to microplastic biofilms. Additionally, we observed that the assembly of the microbial community in biofilms was more affected by stochastic processes than in seawater under the exposure of prometryn. Our study provided evidence for the increasing impact of the microbial communities under the stress of prometryn and microplastics.

Occurrence of polyhalogenated carbazoles and the combined effects with heavy metals on variation in bacterial communities in estuarine sediments

Carbazole (CZ) and eight polyhalogenated carbazoles (PHCZs) were quantified by GC-MS in sediments of 12 estuaries, the interface linking large industrial and living areas to the Bohai Sea, China. These pollutants, heavy metals, and environmental factors caused integrated exposure to sediment bacteria. Four PHCZ congeners were detectable, with ΣPHCZs ranging from 0.56 to 15.94 ng/g dw. The dominant congeners were 3,6-dichlorocarbazole (36-CCZ) and 3-chlorocarbazole (3-CCZ), with a mean contribution of 72.6 % and 20.2 %. Significant positive correlations were found between 36-CCZ and both total organic carbon and heavy metals. Redundancy analysis of microbial variation implicated no impacts from PHCZs. Correlation analysis demonstrated an increase in abundance of Rhodocyclaceae but a decrease in Bacteroides-acidifaciens-JCM-10556 with presence of PHCZs, suggesting that these bacteria can be used as potential contamination indicators. The combined exposure of heavy metals, nutrients, and PHCZs may also increase toxicity and biological availability, adversely affecting the ecosystem and human health.

Effects of single and combined contamination of total petroleum hydrocarbons and heavy metals on soil microecosystems: Insights into bacterial diversity, assembly, and ecological function

Deciphering the impact of single and combined contamination of total petroleum hydrocarbons (TPH) and heavy metals on soil microecosystems is essential for the remediation of contaminated habitats, yet it remains incompletely understood. In this study, we employed high-throughput sequencing to investigate the impact of single TPH contamination, single metal contamination, and their co-contamination on soil microbial diversity, assembly mechanisms, composition, ecological function, and resistome. Our results revealed that contamination led to a reduction in alpha diversity, with single contamination displaying lower diversity compared to co-contamination, depending on the concentration of pollutants. Community beta diversity was primarily driven by turnover rather than nestedness, and narrower ecological niches were detected under pollution conditions. The neutral community model suggested that homogenizing dispersal played a significant role in the community assembly process under single TPH or co-contamination, while homogeneous selection dominated under heavy metals pollution. Procrustes analysis demonstrated a correlation between community composition and functional divergence, while Mantel tests linked this divergence to concentrations of Cr, Cr6+, Pb, and TPH. Interestingly, soils co-polluted with TPH and heavy metals exhibited similar genera, community functions, and resistomes as soils contaminated with only metals, highlighting the significant impact of heavy metals. Ecological functions related to carbon (C), nitrogen (N), and sulfur (S) cycles were enhanced under TPH pollution but impaired under heavy metals stress. These findings enhance our understanding of soil microecosystems subjected to TPH, heavy metals, and their co-contamination, and carry significant implications for environmental microecology and pollutant risk assessment.

Insight into functional mechanisms of percarbamide and nitrification inhibitors in degrading fungicide residues and shaping microbial communities in soil-plant systems

Fungicides and nitrogen (N) fertilizers are essential to maintain plant yield in current intensive agriculture. Percarbamide is a novel type of N fertilizer with strong oxidizing property, and the nitrification inhibitor is widely used in agricultural production. It may be feasible to apply percarbamide and nitrification inhibitor as N management to promote fungicide dissipations in soil-plant system. This study quantified the effects of percarbamide and nitrification inhibitor dicyandiamide (DCD) and 3, 4-dimethylpyrazole phosphate (DMPP) on carbendazim residues, and microbial communities of soil-plant systems, and relationships among carbendazim residues, soil and endophytic microbial communities and plant yields were also comprehensively quantified. Compared with the control, the percarbamide significantly reduced soil carbendazim residues by 29.4% but enhanced the lettuce yield by 28.0%. Soil carbendazim residues were significantly and negatively correlated with the soil total N and NO3--N contents. Soil microbial community structures and co-occurrence networks were more sensitive to N management than their endophytic counterparts. In comparison to the percarbamide alone, the DCD significantly increased the nodes of soil fungal community co-occurrence network which were positively correlated with the plant yield. The DCD outweighed DMPP in increasing the lettuce yield and soil fungal community stability and reshaping soil bacterial community structure. Our study suggested that soil microbial communities were more sensitive to percarbamide and nitrification inhibitor applications than their endophytic counterparts under fungicide pressure and that the DCD outweighed DMPP in reshaping microbial communities. The integrated applications of percarbamide and nitrification inhibitors were promising soil N management strategies to promote fungicide removal and stimulate microbial community in the soil-plant systems.

Biofilm formation on polyethylene microplastics and their role as transfer vector of emerging organic pollutants

Microplastic (MP)-colonizing microorganisms are important links for the potential impacts on environmental, health, and biochemical circulation in various ecosystems but are not yet well understood. In addition, biofilms serve as bioindicators for the evaluation of pollutant effects on ecosystems. This study describes the ability of three polyethylene-type microplastics, white (W-), blue (B-), and fluorescent blue (FB-) MPs, to support microbial colonization of Pseudomonas aeruginosa, the effect of mixed organic contaminants (OCs: amoxicillin, ibuprofen, sertraline, and simazine) on plastic-associated biofilms, and the role of biofilms as transfer vectors of such emerging pollutants. Our results showed that P. aeruginosa had a strong ability to produce biofilms on MPs, although the protein amount of biomass formed on FB-MP was 1.6- and 2.4-fold higher than that on B- and W-MP, respectively. When OCs were present in the culture medium, a decrease in cell viability was observed in the W-MP biofilm (65.0%), although a general impairing effect of OCs on biofilm formation was ruled out. Microbial colonization influenced the ability of MPs to accumulate OCs, which was higher for FB-MP. In particular, the sorption of amoxicillin was lower for all bacterial-colonized MPs than for the bare MPs. Moreover, we analysed oxidative stress production to assess the impact of MPs or MPs/OCs on biofilm development. The exposure of biofilms to OCs induced an adaptive stress response reflected in the upregulation of the katB gene and ROS production, particularly on B- and FB-MP. This study improves our understanding of MP biofilm formation, which modifies the ability of MPs to interact with some organic pollutants. However, such pollutants could hinder microbial colonization through oxidative stress production, and thus, considering the key role of biofilms in biogeochemical cycles or plastic degradation, the co-occurrence of MPs/OCs should be considered to assess the potential risks of MPs in the environment.

Toxicity sharing model of earthworm intestinal microbiome reveals shared functional genes are more powerful than species in resisting pesticide stress

Earthworm intestinal bacteria and indigenous soil bacteria work closely during various biochemical processes and play a crucial role in maintaining the internal stability of the soil environment. However, the response mechanism of these bacterial communities to external pesticide disturbance is unknown. In this study, soil and earthworm gut contents were metagenomically sequenced after exposure to various concentrations of nitrochlorobenzene (0-1026.7 mg kg^-1). A high degree of similarity was found between the microbial community composition and abundance in the worm gut and soil, both of which decreased significantly (P < 0.05) under elevated pesticide stress. The toxicity sharing model (TSM) showed that the toxicity sharing capacity was 97.4-125.7 % and 100.4-130.2 % for E_genes (genes in the worm gut) and E_met(degradation genes in the worm gut) in the earthworm intestinal microbiome, respectively. This indicated that the earthworm intestinal microbiome assisted in relieving the pesticide toxicity of the indigenous soil microbiome. This study showed that the TSM could quantitatively describe the toxic effect of pesticides on the earthworm intestinal microbiome. It provides a new analytical model for investigating the ecological alliance between earthworm intestinal microbiome and indigenous soil microbiome under pesticide stress while contributing a more profound understanding of the potential to use earthworms to mitigate pesticide pollution in soils and develop earthworm-based soil remediation techniques.

Variations of microbiota in three types of typical military contaminated sites: Diversities, structures, influence factors, and co-occurrence patterns

Contamination with energetic compounds (ECs) is common in military sites and poses a great risk to the environment and human health. However, its effects on the soil bacterial communities remain unclear. This study assessed the variations of bacterial communities, co-occurrence patterns, and their influence factors in three types of typical military-contaminated sites (artillery range, military-industrial site, and ammunition destruction site). The results showed that the most polluted sites were ammunition destruction sites, followed by military-industrial sites, whereas pollution in the artillery ranges was minimal. The average concentrations of ECs including 2,4,6-trinitrotoluene (TNT), hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX), and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) in the study sites ranged 120-1.67 × 10⁵, 20-7.20 × 10⁴, and 180-2.38 × 10⁵ μg/kg, respectively. Bacterial diversity and community structure in military-industrial and ammunition destruction sites were significantly changed, but not in artillery ranges. TNT, pH, and soil moisture are the critical factors affecting bacterial communities in contaminated military sites. Co-occurrence network analysis indicated that the pressure of ECs affected bacterial interactions and microbiota function. Our findings provide new insights into the variations in bacterial communities in EC-contaminated military sites and references for the bioremediation of ECs.

Community response of soil microorganisms to combined contamination of polycyclic aromatic hydrocarbons and potentially toxic elements in a typical coking plant

Both polycyclic aromatic hydrocarbons (PAHs) and potentially toxic elements (PTEs) of coking industries impose negative effects on the stability of soil ecosystem. Soil microbes are regarded as an essential moderator of biochemical processes and soil remediation, while their responses to PAHs-PTEs combined contamination are largely unknown. In the present study, soil microbial diversity and community composition in the typical coking plant under the chronic co-exposure of PAHs and PTEs were investigated and microbial interaction networks were built to reveal microbial co-occurrence patterns. The results indicated that the concentrations of PAHs in the soil inside the coking plant were significantly higher than those outside the plant. The mean concentration of ∑16PAHs was 2894.4 ng·g^-1, which is 5.58 times higher than that outside the plant. The average Hg concentration inside the coking plant was 22 times higher than the background value of Hebei province. The soil fungal community inside the coking plant showed lower richness compared with that of outside community, and there are significant difference in the bacterial and fungal community composition between inside and outside of coking plant (p < 0.01). Predicted contribution of different environmental factors to each dominant species based on random forest identified 20 and 25 biomarkers in bacteria and fungi, respectively, that were highly sensitive to coking plant soil in operation, such as Betaproteobacteria，Sordariomycetes and Dothideomycetes. Bacterial and fungal communities were shaped by the soil chemical properties (pH), PTEs (Hg), and PAHs together in the coking plant soils. Furthermore, the bacterial and fungal interaction patterns were investigated separately or jointly by intradomain and interdomain networks. Competition is the main strategy based on the co-exclusion pattern in fungal community, and the competitive relationship inside the coking plant is more complex than that outside the plant. In contrast, cooperation is the dominant strategy in bacterial networks based on the co-occurrence pattern. The present study provided insights into microbial response strategies and the interactions between bacteria and fungi under long-term combined contamination.

Effects of emerging contaminants and heavy metals on variation in bacterial communities in estuarine sediments

Emerging contaminants (ECs) and heavy metals (HMs) are universally present together in estuarine sediments; despite this, their effects on microbial communities have been widely studied separately, rather than in consort. In this study, the combined effects of ECs and HMs on microbial communities were investigated in sediments from 11 major river estuaries around the Bohai Sea, China. Proteobacteria, Bacteroidetes, and Firmicutes were the dominant phyla in the sediments. Using Shannon indices, total phosphorus and total organic carbon were shown to affect microbial community structure. Redundancy analysis of microbial variation implicated Cd and As as the greatest pollutants, followed by Mn, Fe, Zn and Cu; no impacts from galaxolide (HHCB) and tonalide (AHTN) were found. Correlation analysis demonstrated that the concentration of ECs increased the abundance of certain bacteria (e.g., Haliangium, Altererythrobacter, Gaiella and Erythrobacter), and therefore these can be used as potential contamination indicators. Shannon indices and Chao1 indices showed that there were differences in the richness and diversity of bacterial communities in the sediments of 11 rivers. The principal coordinate analysis displayed higher similarity of bacterial community composition in estuarine sediments in Liaoning province than other regions. The results can be used to predict changes in estuary ecosystems to maintain their ecological balance and health.

Linking Bacterial Growth Responses to Soil Salinity with Cd Availability

This study investigated the effects of different types of saline stress on the availability of cadmium (Cd) and bacterial growth. Changes in soil physicochemical properties and DTPA-Cd content as well as microbial responses after the addition of salts were measured. The addition of 18 g kg^-1 of salts with NaCl and Na₂SO₄ increased the available Cd content by up to 17.80%-29.79%. Respiration rate, biomass, and relative bacterial growth decreased with increasing salt concentrations. Estimated salinity tolerance of bacterial communities based on pollution-induced community tolerance. The salinity tolerance index EC₅₀ of the bacterial community was estimated by logistic equation and ranged from 4.32-12.63 g kg^-1. Structural equation modeling showed that soil salinity stress significantly affected Cd availability and bacterial community, while bacterial growth characteristics also contributed to reducing available Cd. We conclude that saline stress can alter soil Cd availability in soils by affecting the growth characteristics of soil bacterial communities.

Analyzing the Relationship between Hotel Brand Image, Service Quality, Experience Marketing, and Customer Satisfaction under the Environment of Social Network

Based on the development background of the social network environment, higher requirements are put forward for the development and transformation of hotels in the new era. As a representative industry in the service industry, the service quality and experience provided by the hotel can meet the feelings and needs of customers. According to the data of the hotel industry in previous years, it can be found that from 2015 to 2018, the average revenue of hotel rooms available for rent (RevPAR) decreased by 7.7%, 5.3%, and 7.7%, respectively; The occupancy rate dropped to the lowest point at the end of 2018 and then began to rise gradually. In addition, while the economy recovers, the tourism industry has driven the hotel industry. RevPAR has increased by—1.4% and 3.5% year-on-year, and the occupancy rate has increased by 3.6% and 2.0% year-on-year. In 2018, China's star hotels generally showed an upward trend. This also shows the attraction of hotel brand logo to customers. By studying the factors such as brand image and service quality, we can establish the viscosity with customers. This paper explores the relationship between various elements and customers and puts forward effective suggestions in order to further improve the service level of the hotel.

Plant-scale hyperthermophilic composting of sewage sludge shifts bacterial community and promotes the removal of organic pollutants

The dissipation of toxic organic pollutants during plant-scale hyperthermophilic composting and the influence of microbial community remain unclear. The results of plant-scale hyperthermophilic composting of municipal sludge with green waste showed that the residual concentrations of polyaromatic hydrocarbons, phthalates, polybrominated diphenyl ethers were <5 mg/kg and decreased over time, with the removal percentages from 12.1% to 51.2% during seven days of composting. High-throughput sequencingreveals that hyperthermophilic composting significantly reduced the diversity (e.g., observed species, chao1 and Shannon index) of bacterial community, shifting their structure and functions. The relative abundances of dominant phyla Proteobacteria and Firmicutes declined significantly, while those of extremophilic and heat-resisting phyla Deinococcus-Thermus and Chloroflexi increased dramatically. Some genera capable of degrading organic pollutants presented stably in sludge composts. Moreover, hyperthermophilic composting enriched the bacterial functions related to degradation and metabolism of cellulose and xenobiotics pollutants, which promoted the dissipation of organic pollutants and humification.

The response of bacterial communities to V and Cr and novel reducing bacteria near a vanadium‑titanium magnetite refinery

Soil contamination with multiple heavy metals has always been a pressing issue, but little attention has been given to V and Cr and their chemical fractions' impacts on microorganisms because Cr₂O₃ usually occurs as an associated mineral in vanadium mines. To investigate this issue, samples (N1-N6) less affected by anthropogenic activities were selected for microbial analysis. The area near the refinery was heavily contaminated according to the PLI (pollution load index). Actinobacteriota, Proteobacteria, and Chloroflexi were the dominant phyla in the soil. The diversity of bacteria was positively influenced by V and Cr and negatively influenced by pH, while the abundance was positively correlated with soil nutrients. Interestingly, the influence of heavy metals in the residual fraction on the microbial community structure and functional metabolism was higher than that in the oxidizable fraction, which may be due to the relatively low heavy metal valence of the oxidizable fraction, suggesting that low valence binding forms of multivalence elements have little effect on microorganisms in the soil. Ultimately, two strains with great efficiency in reducing V and Cr were screened, and co-occurrence network characteristics with significant positive interactions suggested that Bacillus can coordinate community structure in the same niche. This research will help to explore the bioavailability of heavy metals and further achieve the bioremediation of heavy metal contamination in soil.

Chelating surfactant N-lauroyl ethylenediamine triacetate enhanced electrokinetic remediation of copper and decabromodiphenyl ether co-contaminated low permeability soil: Applicability analysis

In this study, chelating surfactant N-lauroyl ethylenediamine triacetate (N-LED3A) was used as strengthening agent for electrokinetic (EK) remediation of copper (Cu) and decabromodiphenyl ether (BDE209) co-contaminated low permeability soil. The results indicated that negligible amount of N-LED3A would be adsorbed on the experimental soil. The synchronous elution efficiencies (SEEs) of Cu and BDE209 had reached 65.4% and 49.9%, respectively, when the concentration of N-LED3A was 4000 mg/L, and they kept almost unchanged as the concentration of N-LED3A further increased. Meanwhile, the optimal SEEs were obtained at the pH condition within 6-8. The removal efficiencies of Cu (55.3%-65.8%) and BDE209 (31.4%-46.4%) would be increased with the applied voltage gradient and concentration of N-LED3A. In addition, BDE209 and Cu contaminants were also detected in the catholyte and anolyte, respectively, and their concentrations still showed an uptrend by the end of the experiments. While in the control experiments, the removal efficiency of Cu was in the range of 18.2%-23.6%, and almost no BDE209 was migrated out. The electric current would be increased with N-LED3A concentration increased, further resulting in the enhancement of cumulative electro-osmotic flow (EOF). However, the increment of EOF was limited after an 8-day treatment due to the declined capacity of the soil water supply, and the removal efficiency of BDE209 did not change proportionally to the cumulative EOF as a consequence. The accumulated (21 days) energy consumption under the optimal operation conditions (voltage gradient 1 V/cm, N-LED3A 1 g/L) was 377.28 KWh/m³. Efficiently synchronous removal of BDE209 and Cu could be achieved by the N-LED3A enhanced EK technique, exhibiting a promising application potential in the organic pollutant and heavy metal co-contaminated soil remediation.