Efficient degradation of diclofenac sodium by periodate activation using Fe/Cu bimetallic modified sewage sludge biochar/UV system

Highly efficient removal of diclofenac sodium with polystyrene supported ionic liquid

ABSTRACTDiclofenac sodium (DS) is now recognized as an emerging pollutant, and is one of the most commonly discovered pharmaceuticals in water due to its extensive application in the clinic. This study examined the adsorption performance of a polystyrene-supported ionic liquid material (PS-[Nim][Cl]) for the removal of diclofenac sodium (DS) from water. The data from this study showed that maximum removal of DS can be achieved even in conditions with significant pH and temperature fluctuations. The adsorption process was rapid, more than 90% of DS could be removed within the first 10 min and adsorption equilibrium could be reached in just 30 min with a high removal efficiency (>99.9%). Adsorption reached saturation with a maximum adsorption capacity of approximately 785.2 mg/g. Moreover, the presence of K+, Na+, Ca2+, Mg2+, Cl-, and H2PO4- ions had little influence on DS adsorption, even when concentrations of these ions were 10,000 times higher than that of DS in water samples. The adsorbent also showed promising performance for the treatment of environmental water samples and groundwater containing DS.

Activation of periodate by biocarbon-supported multiple modified nanoscale iron for the degradation of bisphenol A in high-temperature aqueous solution

As reported, the persistent toxic and harmful pollutant bisphenol A (BPA) from industrial emissions has been consistently found in aquatic environments inhabited by humans. Periodate (PI)-based advanced oxidation processes (AOPs) have been employed to degrade BPA, although activating PI proves more challenging compared to other oxidants. A novel nano iron metal catalyst, sulfided nanoscale iron-nickel bimetallic nanoparticle supported on biocarbon (S-(nFe0-Ni)/BC) was synthesized and utilized to activate PI for the removal of BPA. The morphology, structure, and composition of S-(nFe0-Ni)/BC were characterized using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy-energy dispersive spectrometer (SEM-EDS), and fourier-transform infrared spectrum (FTIR). The catalyst demonstrates an excellent ability to activate PI, achieving a BPA removal efficacy of 86.4%, accompanied by a 33% reduction in total organic carbon (TOC) in the {S-(nFe0-Ni)/BC}/PI system. BPA degradation exhibited a significant change at the 5-min mark. In the first stage (0-5 min), nonlinear dynamic fitting research, combined with scavenging experiments, unveiled the competitive degradation of pollutants primarily driven by iodate radical ( IO 3 · ), singlet oxygen1 O 2 , and hydroxyl radical ( · OH ). The competitive dynamics aligned with the ExpAssoc model. The contribution rates of different active species during the second stage (5-120 min) were calculated. The contributions of main species to BPA removal follow the order of IO 3 · >1 O 2 > · OH throughout the entire process. The influence of various parameters, such as the dosage of S-(nFe0-Ni)/BC, initial PI concentration, BPA concentration, pH, temperature, and the presence of coexisting anions, was also examined. Finally, a plausible reaction mechanism in the system is proposed, suggesting that the {S-(nFe0-Ni)/BC}/PI system involves a heterogeneous synergistic reaction occurring primarily on the surface of S-(nFe0-Ni)/BC. Therefore, this study proposes a promising approach for PI-based AOPs to degrade organic pollutants, aiming to mitigate the irreversible harm caused by such pollutants to organisms and the environment.

Versatility of copper-iron bimetallic nanoparticles fabricated using Hibiscus rosa-sinensis flower phytochemicals: various enzymes inhibition, antibiofilm effect, chromium reduction and dyes removal

Bimetallic nanoparticles (NPs) are considered superior in terms of stability and function with respect to its monometallic counterparts. Hence, in the present study Hibiscus rosa-sinensis flower extract was used to synthesis copper-iron bimetallic nanoparticles (HF-FCNPs). HF-FCNPs was characterized and its applications (biological and environmental) were determined. HF-FCNPs were spherical in shape with high percentage of copper inducted into the NPs. HF-FCNPs inhibited mammalian glucosidases [maltase (IC50: 548.71 ± 61.01 µg/mL), sucrase (IC50: 441.34 ± 36.03 µg/mL), isomaltase (IC50: 466.37 ± 27.09 µg/mL) and glucoamylase (IC50: 403.12 ± 14.03 µg/mL)], alpha-amylase (IC50: 16.27 ± 1.73 µg/mL) and acetylcholinesterase [AChE (IC50: 0.032 ± 0.004 µg/mL)] activities. HF-FCNPs showed competitive inhibition against AChE, maltase and sucrase activities; mixed inhibition against isomaltase and glucoamylase activities; whereas non-competitive inhibition against α-amylase activity. HF-FCNPs showed zone of inhibition of 16 ± 2 mm against S. mutans at 100 µg/mL concentration. HF-FCNPs inhibited biofilm formation of dental pathogen, S. mutans. SEM and confocal microscopy analysis revealed the disruption of network formation and bacterial cell death induced by HF-FCNPs treatment on tooth model of S. mutans biofilm. HF-FCNPs efficiently removed hexavalent chromium in pH-independent manner and followed first order kinetics. Through Langmuir isotherm fit the qmax (maximum adsorption capacity) was determined to be 62.5 mg/g. Further, HF-FCNPs removed both anionic and cationic dyes. Altogether, facile synthesis of HF-FCNPs was accomplished and its biological (enzyme inhibition and antibiofilm activity) and environmental (catalyst to remove pollutants) applications have been understood.

Natural pyrite-stimulative periodate activation: efficiency and mechanism study

Natural pyrite (NP) is an alternative catalyst for wastewater purification via advanced oxidation processes (AOPs). However, the activation performance and mechanism of periodate (PI) by NP have not yet been revealed. Herein, this work examines the activation performance of NP towards PI and its application in the degradation of antibiotic wastewater. Interestingly, 95.69% of chlortetracycline (CTC) was degraded by NP within 20 min via PI activation. Besides, NP shows effective degradation of various pollutants such as rhodamine B (65.81%), sulfamethoxazole (89.04%), and sodium butylxanthate (99.77%) within 20 min. The active species quenching experiment suggested that the active species ∙ OH ,IO 3 ∙ , 1O2 and the active complex of PI bonded with NP surface participated in CTC degradation. In addition, Fe(II) on NP surface is the main active site for PI activation, while Sn2- species accelerates the reduction of Fe(III) to Fe(II) and promotes sustained PI activation. This work provides new ideas for the application of NP in environmental pollution control.

Tetracycline removal using NaIO4 activated by MnSO4: Design and optimization via response surface methodology

The appearance of recalcitrant organic pollutants such as antibiotics in water bodies has gained a lot of attention owing to their adverse effects on organisms and humans. The current study aims to develop a novel approach to eliminate antibiotic tetracycline (TC) from a synthetic aqueous solution based on the advanced oxidation process triggered by MnSO4-catalyzed NaIO4. A single-factor experiment was performed to observe the impact of pH, NaIO4 concentration, and MnSO4 dosage on TC decomposition, and a three-factor, three-level response surface experiment with TC removal rate as the dependent variable was designed based on the range of factors determined from the single-factor experiment. The single-factor experiment revealed that the ranges of pH, NaIO4 concentration, and MnSO4 dosage need to be further optimized. ANOVA (analysis of variance) results showed that the data from the response surface experiment were consistent with the quadratic model with high R2 (0.9909), and the predicted values were very close to the actual values. After optimization by response surface methodology, the optimal condition obtained was pH = 6.7, [NaIO4] = 0.39 mM, and [MnSO4] = 0.12 mM, corresponding to a TC removal of 96.56%. This optimization condition was fully considered to save the dosage of the high-priced chemical NaIO4.

SiO2@AuAg/PDA hybrid nanospheres with photo-thermally enhanced synergistic antibacterial and catalytic activity

Wastewater discharged from industrial, agricultural and livestock production contains a large number of harmful bacteria and organic pollutants, which usually cause serious harm to human health. Therefore, it is urgent to find a "one-stone-two-birds" strategy with good antimicrobial and pollutant degradation activity for treating waste water. In this paper, SiO2@AuAg/Polydopamine (SiO2@AuAg/PDA) core/shell nanospheres, which possessed synergistic "Ag+-release-photothermal" antibacterial and catalytic behaviors, have been successfully prepared via a simple in situ redox polymerization method. The SiO2@AuAg/PDA nanospheres showed good catalytic activity in reducing 4-nitrophenol to 4-aminophenol (0.576 min-1 mg-1). Since the AuAg nanoclusters contain both gold and silver elements, they provided a high photothermal conversion efficiency (48.1%). Under NIR irradiation (808 nm, 2.5 W-2), the catalytic kinetics were improved by 2.2 times. Besides the intrinsic Ag+-release, the photothermal behavior originating from the AuAg bimetallic nanoclusters and the PDA component of SiO2@AuAg/PDA also critically improved the antibacterial performance. Both E. coli and S. aureus could be basically killed by SiO2@AuAg/PDA nanospheres at a concentration of 90 μg mL-1 under NIR irradiation. This "Ag+-release-photothermal" coupled sterilization offers a straightforward and effective approach to antimicrobial therapy, and further exhibits high potential in nanomedicine for combating bacterial contamination in environmental treatment and biological fields.

Highly efficient activation of periodate by a manganese-modified biochar to rapidly degrade methylene blue

In this study, the manganese oxide/biochar composites (Mn@BC) were synthesized from Phytolacca acinosa Roxb. The Mn@BC was analyzed via techniques of Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and X-ray diffraction analysis (XRD). The results show that MnOx is successfully loaded on the surface of BC, and the load of MnOx can increase the number of surface functional groups of BC. X-ray photoelectron spectroscopy (XPS) shows that MnOx loaded on BC mainly exists in three valence forms: Mn(Ⅱ), Mn(Ⅲ), and Mn(Ⅳ). The ability of Mn@BC to activate periodate (PI) was studied by simulating the degradation of methylene blue (MB) dye. The degradation experiment results showed that the MB removal rate by the Mn@BC/PI system reached 97.4% within 30 min. The quenching experiment and electron paramagnetic resonance (EPR) analysis confirmed that Mn@BC can activate PI to produce iodate (IO3•), singlet oxygen (1O2), and hydroxyl radical (•OH), which can degrade MB during the reaction. Response surface methodology (RSM) based on Box-Behnken Design (BBD) was used to determine the interaction between pH, Mn@BC and PI concentration in the Mn@BC/PI system, and the optimum technological parameters were determined. When pH = 5.4, Mn@BC concentration 0.56 mg/L, PI concentration 1.1 mmol/L, MB removal rate can reach 98.05%. The cyclic experiments show that Mn@BC can be reused. After four consecutive runs, the removal rate of MB by the Mn@BC/PI system is still 82%, and the Mn@BC/PI system also shows high performance in treating MB in actual water bodies and degrading other pollutants. This study provides a practical method for degrading dyes in natural sewage.

Efficient degradation of antibiotic wastewater by biochar derived from water hyacinth stems via periodate activation: pyridinic N and carbon structures improved the electron transfer process

Biochar-activated periodate (PI) is a promising technology toward antibiotic wastewater purification. However, the mechanism of pyrolysis temperature on PI activation efficiency by biochar has not yet been revealed. Herein, this work selected water hyacinth stems as raw materials to prepare biochar with different pyrolysis temperatures (400, 500, 600, and 700 °C), and applied it to degrade tetracycline (TC) wastewater through PI activation. The results show that biochar with a pyrolysis temperature of 700 °C (BC-700) possesses the best TC degradation performance (∼100% within 30 min). Besides, the degradation of TC by BC-700 is less interfered by coexisting anions and water matrix, and exhibits good reusability. Quenching experiments and open circuit voltage tests verified that IO3•, 1O2, and reactive complex BC-PI* are active species involved in TC degradation. In addition, by constructing the relationship between biochar surface properties and degradation rate kobs, it was revealed that the dominant role of pyridinic N in PI adsorption and formation of reactive complexes as well as the promotion of sp2-hybridized carbon in the electron transfer process. This work provides novel insights into the application of biochar in antibiotic wastewater treatment via PI activation.

Bio-mitigation of organic pollutants using horseradish peroxidase as a promising biocatalytic platform for environmental sustainability

A wide array of environmental pollutants is often generated and released into the ecosystem from industrial and human activities. Antibiotics, phenolic compounds, hydroquinone, industrial dyes, and Endocrine-Disrupting Chemicals (EDCs) are prevalent pollutants in water matrices. To promote environmental sustainability and minimize the impact of these pollutants, it is essential to eliminate such contaminants. Although there are multiple methods for pollutants removal, many of them are inefficient and environmentally unfriendly. Horseradish peroxidase (HRP) has been widely explored for its ability to oxidize the aforementioned pollutants, both alone and in combination with other peroxidases, and in an immobilized way. Numerous positive attributes make HRP an excellent biocatalyst in the biodegradation of diverse environmentally hazardous pollutants. In the present review, we underlined the major advancements in the HRP for environmental research. Numerous immobilization and combinational studies have been reviewed and summarized to comprehend the degradability, fate, and biotransformation of pollutants. In addition, a possible deployment of emerging computational methodologies for improved catalysis has been highlighted, along with future outlook and concluding remarks.

Enhancing fluoride removal from wastewater using Al/Y amended sludge biochar

This study explored the potential of utilizing aluminum and yttrium amended (Al/Y amended) sewage sludge biochar (Al/Y-CSBC) for efficient fluoride removal from wastewater. The adsorption kinetics of fluoride on bimetallic modified Al/Y-CSBC followed the pseudo-second-order model, while the adsorption isotherm conformed to the Freundlich equation. Remarkably, the material exhibited excellent fluoride removal performance over a wide pH range, achieving a maximum adsorption capacity of 62.44 mg·g-1. Moreover, Al/Y-CSBC demonstrated exceptional reusability, maintaining 95% removal efficiency even after six regeneration cycles. The fluoride adsorption mechanism involved ion exchange, surface complexation, and electrostatic adsorption interactions. The activation and modification processes significantly increased the specific surface area of Al/Y-CSBC, leading to a high isoelectric point (pHpzc = 9.14). The incorporation of aluminum and yttrium metals exhibited a novel approach, enhancing the adsorption capacity for fluoride ions due to their strong affinity. Furthermore, the dispersing effect of biochar played a crucial role in improving defluoridation efficiency by enhancing accessibility to active sites. These findings substantiate the significant potential of Al/Y-CSBC for enhanced fluoride removal from wastewater.

Recent Advances in Nanoscale Zero-Valent Iron (nZVI)-Based Advanced Oxidation Processes (AOPs): Applications, Mechanisms, and Future Prospects

The fast rise of organic pollution has posed severe health risks to human beings and toxic issues to ecosystems. Proper disposal toward these organic contaminants is significant to maintain a green and sustainable development. Among various techniques for environmental remediation, advanced oxidation processes (AOPs) can non-selectively oxidize and mineralize organic contaminants into CO2, H2O, and inorganic salts using free radicals that are generated from the activation of oxidants, such as persulfate, H2O2, O2, peracetic acid, periodate, percarbonate, etc., while the activation of oxidants using catalysts via Fenton-type reactions is crucial for the production of reactive oxygen species (ROS), i.e., •OH, •SO4-, •O2-, •O3CCH3, •O2CCH3, •IO3, •CO3-, and 1O2. Nanoscale zero-valent iron (nZVI), with a core of Fe0 that performs a sustained activation effect in AOPs by gradually releasing ferrous ions, has been demonstrated as a cost-effective, high reactivity, easy recovery, easy recycling, and environmentally friendly heterogeneous catalyst of AOPs. The combination of nZVI and AOPs, providing an appropriate way for the complete degradation of organic pollutants via indiscriminate oxidation of ROS, is emerging as an important technique for environmental remediation and has received considerable attention in the last decade. The following review comprises a short survey of the most recent reports in the applications of nZVI participating AOPs, their mechanisms, and future prospects. It contains six sections, an introduction into the theme, applications of persulfate, hydrogen peroxide, oxygen, and other oxidants-based AOPs catalyzed with nZVI, and conclusions about the reported research with perspectives for future developments. Elucidation of the applications and mechanisms of nZVI-based AOPs with various oxidants may not only pave the way to more affordable AOP protocols, but may also promote exploration and fabrication of more effective and sustainable nZVI materials applicable in practical applications.

Efficient removal of chloroform from groundwater using activated percarbonate by cellulose nanofiber-supported Fe/Cu nanocomposites

Chloroform (CF) is a recalcitrant halogenated methane (HM) that has received widespread attention due to its frequent detection in groundwater and its potential carcinogenic risk. In this study, TEMPO-oxidized cellulose nanofiber-supported iron/copper bimetallic nanoparticles (TOCNF-Fe/Cu), a novel composite catalyst, was synthesized to activate sodium percarbonate (SPC) for the removal of CF from groundwater. The results showed that over 96.3% of CF could be removed in a neutral reaction medium (pH 6.5-9) within 180 min using 0.66 g L-1 of TOCNF (0.32)-Fe/Cu (1) and 1 mM of SPC, which outperforms typical advanced oxidation processes. The reaction mechanism of the TOCNF-Fe/Cu-SPC system for the CF removal was elucidated. As demonstrated through electron paramagnetic resonance and quenching experiments, the TOCNF-Fe/Cu-SPC system was found to include •OH and O2•-, where the latter played a dominant role in the CF removal. DFT calculations indicated that TOCNF improved the electron transport capability of Fe/Cu and reduced the transition state energy. The Fe species on the surface of TOCNF-Fe/Cu were identified as the primary active sites for SPC activation, whereas the Cu species were beneficial to the regeneration of the Fe species. Additionally, TOCNF-Fe/Cu was found to have good recyclability and stability. The feasibility of the TOCNF-Fe/Cu-SPC system was further confirmed by applying it for the efficient removal of composite HMs from actually contaminated groundwater. Overall, the TOCNF-Fe/Cu-SPC system is an attractive candidate for the treatment of HM-contaminated groundwater.

Removal of tetracycline in aqueous solution by iron-loaded biochar derived from polymeric ferric sulfate and bagasse

In this study, the tetracycline (TC) removal performance of iron-loaded biochar (BPFSB) derived from sugarcane bagasse and polymerized iron sulfate was investigated, and the mechanism of TC removal was also explored by study of isotherms, kinetics and thermodynamics and characterization of fresh and used BPFSB (XRD, FTIR, SEM and XPS). The results showed that under optimized conditions (initial pH 2; BPFSB dosage 0.8 g·L-1; TC initial concentration 100 mg·L-1; Contact time 24 h; temperature 298 K), the removal efficiency of TC was as high as 99.03%. The isothermal removal of TC followed well the Langmuir, Freundlich, and Temkin models, indicating that multilayer surface chemisorption dominated the TC removal. The maximum removal capacity of TC by BPFSB at different temperatures was 185.5 mg·g-1 (298 K), 192.7 mg·g-1 (308 K), and 230.9 mg·g-1 (318 K), respectively. The pseudo-second-kinetic model described the TC removal better, while its rate-controlling step was a combination of liquid film diffusion, intraparticle diffusion, and chemical reaction. Meanwhile, TC removal was also a spontaneous and endothermic process, during which the randomness and disorder between the solid-liquid interface was increased. According to the characterization of BPFSBs before and after TC removal, H-bonding and complexation were the major interactions for TC surface adsorption. Furthermore, BPFSB was efficiently regenerated by NaOH. In summary, BPFSB had the potential for practical application in TC removal.

Activation of periodate by N-doped iron-based porous carbon for degradation of sulfisoxazole: Significance of catalyst-mediated electron transfer mechanism

Periodate (PI) has recently been studied as an excellent oxidant in advanced oxidation processes, and its reported mechanism is mainly the formation of reactive oxygen species (ROS). This work presents an efficient approach using N-doped iron-based porous carbon (Fe@N-C) to activate periodate for the degradation of sulfisoxazole (SIZ). Characterization results indicated the catalyst has high catalytic activity, stable structure, and high electron transfer activity. In terms of degradation mechanism, it is pointed out that the non-radical pathway is the dominant mechanism. In order to prove this mechanism, we have carried out scavenging experiments, electron paramagnetic resonance (EPR) analysis, salt bridge experiments and electrochemical experiments, which demonstrate the occurrence of mediated electron transfer mechanism. Fe@N-C could mediate the electron transfer from organic contaminant molecules to PI, thus improving the efficiency of PI utilization, rather than simply inducing the activation of PI through Fe@N-C. The overall results of this study provided a new understanding into the application of Fe@N-C activated PI in wastewater treatment.

Promoting selective water decontamination via boosting activation of periodate by nanostructured Ru-supported Co3O4 catalysts

The superior catalytic efficiency of ruthenium (Ru)-based nanocomposites in advanced oxidation processes for water decontamination has attracted accumulating attention worldwide. However, rather limited knowledge is currently available regarding their roles in activating periodate (PI), an emerging oxidant with versatile environmental applications. This study firstly delineated that Ru-supported Co₃O₄ (Ru/Co₃O₄), a typical Ru-based nanomaterial, can efficiently accomplish PI activation to eliminate multiple organic micropollutants and inactivate different pathogenic bacteria. Almost all eight micropollutants can be completely removed within 2 min of Ru/Co₃O₄-PI oxidation except sulfamethoxazole (SMX), which was degraded ∼70 % at 2 min with 100 % mineralization after 10 min. The excellent catalytic performance was independent of PI dosages, initial pH, and coexisting water constituents, demonstrating its prominent capability as a selective oxidation strategy. Diverse lines of evidence indicated the dominant role of single oxygen in the Ru/Co₃O₄-PI system, which triggered the generation of five transformation products of SMX with reduced environmental risks. Concurrently, PI was stoichiometrically converted to the eco-friendly IO₃^-. Additionally, Ru/Co₃O₄-PI system achieved 6-log inactivation of different pathogenic bacteria within 1 min, implying the feasibility of rapid water disinfection. Overall, this work demonstrated the excellent promise of Ru-based composites in PI activation for highly efficient and selective water decontamination.

Efficient peroxymonosulfate activation by biochar-based nanohybrids for the degradation of pharmaceutical and personal care products in aquatic environments

Recently, pharmaceutical and personal care products (PPCPs) have been of wide concern due to their ecological toxicity, persistence, and ubiquity in aquatic environments. Peroxymonosulfate-based advanced oxidation processes (PMS-AOPs) have shown great potential for eliminating PPCPs due to their superior oxidation ability and adaptability. Biochar-based nanohybrids have been employed as emerging catalysts for peroxymonosulfate (PMS) activation. Until now, few researchers have summarized PMS activation by biochar-based catalysts for PPCPs removal. In this review, the types, sources, fates, and ecological toxicities of PPCPs were first summarized. Furthermore, various preparation and modification methods of biochar-based catalysts were systematically introduced. Importantly, the application of activating PMS with biochar-based multifunctional nanocomposites for eliminating PPCPs was reviewed. The influencing factors, such as catalysts dosage, PMS dosage, solution pH, temperature, anions, natural organic matters (NOMs), and pollutants concentration were broadly discussed. Biochar-based catalysts can act as electron donors, electron acceptors, and electron shuttles to activate PMS for the removal of PPCPs through radical pathways or/and non-radical pathways. The degradation mechanisms of PPCPs are correlated with persistent free radicals (PFRs), metal species, defective sites, graphitized degree, functional groups, electronic attributes, and the hybridization modes of biochar-based catalysts. Finally, the current problems and further research directions on the industrial application of biochar-based nanocomposites were proposed. This study provides some enlightenment for the efficient removal of PPCPs with biochar-based catalysts in PMS-AOPs.

Emerging periodate-based oxidation technologies for water decontamination: A state-of-the-art mechanistic review and future perspectives

With the ever-increasing severity of the ongoing water crisis, it is of great significance to develop efficient, eco-friendly water treatment technologies. As an emerging oxidant in the advanced oxidation processes (AOPs), periodate (PI) has received worldwide attention owing to the advantages of superior stability, susceptible activation capability, and high efficiency for decontamination. This is the first review that conducts a comprehensive analysis of the mechanism, pollutant transformation pathway, toxicity evolution, barriers, and future directions of PI-based AOPs based on the scientific information and experimental data reported in recent years. The pollutant elimination in PI-based AOPs was mainly attributed to the in situ generate reactive oxygen species (e.g., ^•OH, O(³P), ¹O₂, and O₂^•-), reactive iodine species (e.g., IO₃^• and IO₄^•), and high-valent metal-oxo species with exceptionally high reactivity. These reactive species were derived from the PI activated by the external energy, metal activators, alkaline, freezing, hydroxylamine, H₂O_2, etc. It is noteworthy that direct electron transport could also dominate the decontamination in carbon-based catalyst/PI systems. Furthermore, PI was transformed to iodate (IO₃^-) stoichiometrically via an oxygen-atom transfer process in most PI-based AOPs systems. However, the production of I₂, I^-, and HOI was sometimes inevitable. Furthermore, the transformation pathway of typical micropollutants was clarified, and the in silico QSAR-based prediction results indicated that most transformation products retained biodegradation recalcitrance and multi-endpoint toxicity. The barriers faced by the PI-based AOPs were also clarified with potential solutions. Finally, future perspectives and research directions are highlighted based on the current state of PI-based AOPs. This review enhances our in-depth understanding of PI-based AOPs for pollutant elimination and identifies future research needs to focus on the reduction of toxic byproducts.

Pyrolysis of hydrothermally dewatering sewage sludge: Highly efficient peroxydisulfate activation of derived biochar to degrade diclofenac

The resource utilization of sewage sludge can solve its disposal issue essentially. Meanwhile the removal of diclofenac (DCF) in wastewater is an emerging environmental problem. In this study, a novel strategy of sludge utilizing via hydrothermal - peroxydisulfate (PDS) dewatering coupled pyrolysis process was proposed. The obtained sludge-derived biochar (HSC) could be as candidate to activate PDS to degrade DCF. Results indicated that exceed 90% of DCF was eliminated within 30 min in HSC-PDS/DCF ternary system under the optimized condition (0.6 mmol/L PDS and 0.5 mg/L HSC, without temperature and pH pre-adjusting). The inner mechanism of HSC-PDS/DCF system was revealed as follows: (1) Major: CO in quinones and ketone structure in HSC accelerated the degradation of DCF via non-radical pathway (electron transfer and ¹O₂). (2) Minor: Graphitic N structure accelerated the electron transfer and O₂^•- originated from defective sites involved into the redox. Several by-products were identified and two tentative degradation pathways of DCF (eg. dechlorination and C-N cleavage) were proposed.

Converting Hybrid Mechanisms to Electron Transfer Mechanism by Increasing Biochar Pyrolysis Temperature for the Degradation of Sulfamethoxazole in a Sludge Biochar/Periodate System

In this study, sludge biochar was prepared under four pyrolysis temperatures (SBC300, SBC500, SBC700, and SBC900) and then was employed to activate periodate (PI) for the degradation of sulfamethoxazole (SMX). Various characterization methods were employed to investigate the effect of pyrolysis temperature on the physicochemical properties of sludge biochar and the activation capacity of periodate. The SMX adsorption capacity of SBCs and the ability of activating PI to degrade SMX increased with the increasing pyrolysis temperature. The degradation of SMX by the SBCs/PI systems was highly dependent on the initial pH of the solution and the dosage of SBCs. Mechanistic studies indicated that the degradation of SMX by the SBCs/PI system was mainly based on an electron-mediated transfer mechanism. Additionally, the electron transfer capacity of the SBCs affected the defects and the degree of graphitization. The contribution of free radicals to SMX degradation decreases with increasing pyrolysis temperature. Toxicity experiments demonstrated that the toxic elimination of SMX by the SBCs/PI system was enhanced with increasing pyrolysis temperature.

Improved Dewaterability of Waste Activated Sludge by Fe(II)-Activated Potassium Periodate Oxidation

Fe(II)-activated potassium periodate (KIO₄) oxidation was used to improve the dewaterability of waste-activated sludge for the first time. Compared with those of raw sludge, the capillary suction time (CST), specific resistance filtration (SRF), and water content of filter cake (W_C) of sludge treated using the Fe(II)/KIO₄ process under the optimal conditions (i.e., the initial pH = 6.8, KIO₄ dose = 1.4 mmol/g volatile suspended solids, Fe(II)/KIO₄ molar ratio = 1.2) decreased by 64.34%, 84.13%, and 6.69%, respectively. For conditioned sludge flocs, the Zeta potential and particle size were increased, and hydrophilic proteins in extracellular polymeric substances (EPS) were partly degraded, accompanied by the transformation of tightly bound EPS into soluble EPS and the conversion of dense sludge flocs into loose and porous ones. During Fe(II)/KIO₄ oxidation, Fe(IV) and the accompanying ^•OH were determined as the predominant reactive species and the underlying mechanism of sludge EPS degradation was proposed. This work provides a prospective method for conditioning the sludge dewaterability.

A sustainable reuse strategy of converting waste activated sludge into biochar for contaminants removal from water: Modifications, applications and perspectives

Conversion of sewage sludge to biochar for contaminants removal from water achieves the dual purpose of solid waste reuse and pollution elimination, in line with the concept of circular economy and carbon neutrality. However, the current understanding of sludge-derived biochar (SDB) for wastewater treatment is still limited, with a lack of summary regarding the effect of modification on the mechanism of SDB adsorption/catalytic removal aqueous contaminants. To advance knowledge in this aspect, this paper systematically reviews the recent studies on the use of (modified) SDB as adsorbents and in persulfate-based advanced oxidation processes (PS-AOPs) as catalysts for the contaminants removal from water over the past five years. Unmodified SDB not only exhibits stronger cation exchange and surface precipitation for heavy metals due to its nitrogen/mineral-rich properties, but also can provide abundant catalytic active sites for PS. An emphatic summary of how certain adsorption removal mechanisms of SDB or its catalytic performance in PS-AOPs can be enhanced by targeted regulation/modification such as increasing the specific surface area, functional groups, graphitization degree, N-doping or transition metal loading is presented. The interference of inorganic ions/natural organic matter is one of the unavoidable challenges that SDB is used for adsorption/catalytic removal of contaminants in real wastewater. Finally, this paper presents the future perspectives of SDB in the field of wastewater treatment. This review can contribute forefront knowledge and new ideas for advancing sludge treatment toward sustainable green circular economy.

Novel insights into the mechanism of periodate activation by heterogeneous ultrasonic-enhanced sludge biochar: Relevance for efficient degradation of levofloxacin

In this study, a novel heterogeneous ultrasonic (US)-enhanced sludge biochar (SBC) activated periodate (PI) system was established and explored for the rapid removal of levofloxacin in the aqueous environment. This study focused on the mechanisms of US-enhanced SBC co-activation of PI for levofloxacin degradation. The results indicated that US and SBC exhibited a remarkable synergistic reinforcing activation effect on PI compared to single PI activation systems. The SBC/US/PI system achieved approximately 95% of levofloxacin removal, 51.5% of TOC removal, and 22% of dechlorination rate within 60 min with virtually no heavy metals released into the water matrix. In addition, the acute ecotoxicity of the solutions treated with the SBC/US/PI system was substantially reduced. The presence of IO₃^•, ^•OH, ¹O₂ and O₂^•- were identified in the SBC/US/PI system using quenching experiments and EPR technology while ^•OH and ¹O₂ were the predominant reactive species. Mechanistic studies have suggested that the cavitation effect of ultrasonic improved the dispersion and mass transfer efficiency of SBC and accelerated the desorption process of SBC. Possible pathways of levofloxacin degradation were proposed. This study provides a novel and promising strategy for the efficient removal of emerging contaminants such as antibiotics from the water matrix.

The synergistic effect of calcite and Cu2+ on the degradation of sulfadiazine via PDS activation: A role of Cu(Ⅲ)

A system of Cu²⁺/calcite/PDS was constructed to degrade sulfadiazine (SDZ). Different from the traditional Cu-mediated activation, a low concentration of Cu²⁺ that met drinking water standards (≤ 1 mg/L) transformed into Cu(Ⅱ) solid in the presence of calcite, and then enhanced the degradation of SDZ via PDS activation over a pH range from 3 to 9. According to scavenger and chemical probe experiments, Cu(Ⅲ), rather than radicals (hydroxyl radicals and sulfate radicals) and singlet oxygen, was the predominant reactive species, which was responsible for the degradation of SDZ. Based on the results of XRD, ATR-FTIR, and CV curves et al., CuCO₃ was the main complex with high reactivity for PDS activation to form Cu(Ⅲ). Moreover, detailed degradation pathways of sulfadiazine were proposed according to the UPLC-ESI-MS/MS and their toxicity was predicted by ECOSAR. Besides, the real water matrix would not seriously affect the degradation of SDZ in the Cu²⁺/calcite/PDS system. In summary, this study reveals a new insight into the synergistic effect of Cu²⁺ and calcite on the SDZ degradation, and promotes an understanding of the environmental benefits of natural calcite.

Photocatalytic oxidation of glyphosate and reduction of Cr(VI) in water over ACF-supported CoNiWO4-gCN composite under batch and flow conditions

Photocatalytic treatment of wastewater using nanomaterials is an efficient energy saving technology. Yet the practical application of the technology is limited because of difficulty in developing the stable, supported photocatalytic nanoparticles that can be used under continuous flow conditions. Here, we report an efficient removal of glyphosate (GLP) and Cr(VI) from water under batch as well as continuous flow conditions using the activated carbon fiber (ACF)-supported nanocomposite of CoNiWO4 (CNW) and g-C3N4 (gCN), as a photocatalyst. CNW-gCN/ACF is synthesized using a one-step strategy, and spectroscopic characterization techniques are used to corroborate the formation of the Z-scheme-based CNW-gCN heterojunction in the ACF substrate. Efficacy of the photocatalyst is assessed in visible light irradiation. The batch activity data of the individual pollutant show the complete oxidation of GLP at 30 ppm and reduction of Cr(VI) at 200 ppm concentration levels in 60 and 150 min, respectively at 1 g/L dose of CNW-gCN/ACF. Photocatalytic efficiency of CNW-gCN/ACF in the simultaneous removal of both pollutants from co-contaminated feed is found to be greater than that in single-feed system under identical experimental conditions. Tested under flow conditions, CNW-gCN/ACF shows approximately the same rates of oxidation and reduction as prevalent under batch conditions, indicating the efficient immobilization of the nanocatalyst particles in ACF, which not only prevents elution of the catalyst but also improves its reusability. The toxicity data indicate the treated water samples to be non-toxic. The current study provides an efficient method for developing supported nanomaterial photocatalysts for treating flowing co-contaminated wastewater.

Long-term effect of perfluorooctanoic acid on the anammox system based on metagenomics: Performance, sludge characteristic and microbial community dynamic

The effects of PFOA on the nitrogen removal performance, microbial community and functional genes of anaerobic ammonium oxidation (anammox) sludge in an anaerobic baffled reactor (ABR) were investigated. The removal efficiencies of ammonia nitrogen (NH₄⁺-N) and nitrite (NO₂^--N) decreased from 93.90 ± 3.64% and 98.6 ± 1.84% to 77.81 ± 6.86% and 77.96 ± 1.88% when PFOA increased from 5 mg/L to 50 mg/L, respectively. X-ray photoelectron spectra analysis of the anammox sludge showed the presence of both C-F and CaF₂ forms of F. Metagenomics analysis of the anammox sludge in the first compartment illustrated that the relative abundance of Ca.Brocadia and Ca.Kuenenia decreased from 22.21% and 5.61% to 2.11% and 2.84% at 50 mg/L PFOA compared with that without PFOA. In addition, the nitrogen metabolism pathway showed that adding 50 mg/L PFOA decreased the expression of HzsB, HzsC, and Hdh (anammox genes) by 0.096%, 0.05% and 0.062%, respectively.

Periodate activated by manganese oxide/biochar composites for antibiotic degradation in aqueous system: Combined effects of active manganese species and biochar

Developing efficient catalysts for oxytetracycline (OTC) degradation is an ideal strategy to tackle environmental pollution, and advanced oxidation processes (AOPs) have been widely used for its degradation. However, the studies on the activation of periodate (PI) by biochar and its composites in recent years have been scarcely reported. In this study, we focused on the degradation of OTC by PI activation with manganese oxide/biochar composites (Mn_xO_y@BC). Experimental results showed that the OTC degradation rate of Mn_xO_y@BC/PI system reached almost 98%, and the TOC removal efficiency reached 75%. Various characteristic analysis proved that PI could be activated efficiently by surface functional groups and manganese-active species (Mn(II), Mn(III), and Mn(IV)) on biochar, and various reactive species such as singlet oxygen (¹O₂), hydroxyl radical (∙OH), and superoxide radical (O₂^∙-) can be observed via radical quenching experiments. Based on this, three degradation pathways were proposed. Furthermore, Mn_xO_y@BC and PI were combined to degrade environmental pollutants, which achieved excellent practical benefits and had great practical application potential. We hope that it can provide new ideas for advanced oxidation processes (AOPs) applying for wastewater treatment in the future.

Iron Carbon Catalyst Initiated the Generation of Active Free Radicals without Oxidants for Decontamination of Methylene Blue from Waters

In conventional oxidation technologies for treatment of contaminated waters, secondary pollution of the aqueous environment often occurs because of the additional oxidants generated during the process. To avoid this problem, Fe/NG catalyst composites without additives were developed in this study for decontamination of methylene blue (MB) from waters. The Fe/NG catalyst, composed of carbon nitride and iron chloride (FeCl3·6H2O), was prepared by high temperature pyrolysis. It is an exceptionally efficient, recoverable, and sustainable catalyst for degradation of organic matter. The morphological characteristics, chemical structure, and surface properties of the catalyst composites were investigated. The catalyst exhibited high MB removal efficiency (100%) within 30 min under ambient temperature and dark conditions. The experiments indicated that an MB degradation effect was also applicable under most acid–base conditions (pH = 2–10). The characterization results using electron spin resonance and analysis of intermediate products demonstrated that free radicals such as ·OH and ·O2− were produced from the Fe/NG composites in the heterogeneous system, which resulted in the high MB degradation efficiency. Moreover, the catalysis reaction generated reducing substances, triggering iron carbon micro-electrolysis to spontaneously develop a microcurrent, which assisted the degradation of MB. This study demonstrates the feasibility of Fe/NG catalysts that spontaneously generate active species for degrading pollutants in an aqueous environment at normal temperature, providing an attractive approach for treating organic-contaminated waters.

Insights into efficient adsorption of the typical pharmaceutical pollutant with an amphiphilic cellulose aerogel

An amphiphilic cellulose aerogel (HCNC-TPB/TMC) was fabricated by grafting 1,3,5-Tris (4-aminophenyl)benzene (TPB) and trimesoyl chloride (TMC) onto the aldehyde nanocellulose through Schiff alkali and substitution reaction. The obtained HCNC-TPB/TMC exhibited good morphology with cellulose fiber and owned abundant hydrophilic amino and carboxyl groups and hydrophobic aromatic groups. The batch adsorption experiments demonstrated that HCNC-TPB/TMC showed excellent adsorption performance (Q_max = 526.32 mg g^-1) for sodium diclofenac (DCF), wide pH applicability (4-10) and outstanding stability and reusability. The DCF adsorption obeyed the pseudo-second-order kinetic model and the Langmuir isotherm, and underwent a spontaneous exothermic process. The main adsorption mechanisms involved electrostatic interaction, hydrogen bonds, π-π stacking interaction and hydrophobic effect. Importantly, the introduced carboxyl aromatic groups on TMC could effectively strengthen the hydrogen bonds and the π-π stacking between HCNC-TPB/TMC and DCF.

Metal-organic framework-derived magnetic carbon for efficient decontamination of organic pollutants via periodate activation: Surface atomic structure and mechanistic considerations

Practical implementation of periodate-based advanced oxidation processes for environmental remediation largely relies on the development of cost-effective and high-performance activators. Surface atomic engineering toward these activators is desirable but it remains challenging to realize improved activation properties. Here, a surface atomic engineering strategy used to obtain a novel hybrid activator, namely cobalt-coordinated nitrogen-doped graphitic carbon nanosheet-enwrapped cobalt nanoparticles (denoted as Co@NC-rGO), from a sandwich-architectured metal-organic framework/graphene oxide composite is reported. This activator exhibits prominent periodate activation properties toward pollutant degradation, surpassing previously reported transition-metal-based activators. Importantly, the activator shows good stability, magnetic reusability, and the potential for application in a complex water matrix. Density functional theory modeling implies that the strong activation capability of Co@NC-rGO is related to its surface atomic structure for which the embedded cobalt nanoparticles with abundant interfacial Co-N coordinations display modified electronic configurations on the active centers and benefit periodate adsorption. Quenching experiments and electrochemical measurements showed that the system could oxidize organics through a dominant nonradical pathway. Additionally, a lower concentration of cobalt leaching was observed for the Co@NC-rGO/periodate system than for its Co@NC-rGO/persulfate counterpart. Our work provides a pathway toward engineering surface atomic structures in hybrid activators for efficient periodate activation.

Removal of pharmaceuticals from water using sewage sludge-derived biochar: A review

In recent years, considerable attention has been paid to the beneficial utilization of sewage sludge to reduce the risks associated with sludge disposal. Besides other applications of sludge, biochar produced from sludge has also been employed for the elimination of various pollutants from water. This review critically evaluates the recent progress in applications of sludge-based biochar for the adsorption of pharmaceuticals from water. The synthesis techniques of biochar production from sludge and their effects on physicochemical characteristics of produced biochar are discussed. The removal of various pharmaceuticals by sludge-based biochar are described in detail, with the emphasis on the adsorption mechanism and their reusability potential. It is evident from the literature that sludge-based biochar has demonstrated excellent potential for the adsorption of numerous pharmaceuticals from the aqueous phase. The major hurdles and issues related to the synthesis of sludge-based biochar and applications are highlighted, with reference to the adsorption of pharmaceuticals. Finally, a roadmap is suggested along with future research directions to ensure the sustainable production of biochar from sludge and its applications in water treatment.

ABTS as an electron shuttle to accelerate the degradation of diclofenac with horseradish peroxidase-catalyzed hydrogen peroxide oxidation

Horseradish peroxidase (HRP)-catalyzed hydrogen peroxide (H₂O₂) oxidation could degrade a variety of organic pollutants, but the intrinsic drawback of slow degradation rate limited its widespread application. In this study, 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate) (ABTS) was introduced into HRP/H₂O₂ system as an electron shuttle to enhance diclofenac degradation under neutral pH conditions. The green-colored ABTS radical (ABTS^•+), generated by the oxidation of ABTS with HRP-catalyzed H₂O₂ oxidation, was proved to be the main reactive species for the rapid degradation of diclofenac in HRP/H₂O₂/ABTS system. There was no destruction of ABTS/ABTS^•+ in HRP/H₂O₂/ABTS system, and ABTS was verified as an ideal electron shuttle. The reaction conditions including solution pH (4.5-10.5), HRP concentration (0-8 units mL^-1) and H₂O₂ concentration (0-500 μM) would impact the formation of ABTS^•+, and affect the degradation of diclofenac in HRP/H₂O₂/ABTS system. Moreover, compared with Fenton and hydroxylamine/Fenton systems, HRP/H₂O₂/ABTS system had better diclofenac degradation efficiency, higher H₂O₂ utilization efficiency and stronger anti-interference capacity in actual waters. Overall, the present study provided a meaningful and promising way to enhance the degradation of organic pollutants in water with HRP-catalyzed H₂O₂ oxidation.