Microplastics in the environment: Sampling, pretreatment, analysis and occurrence based on current and newly-exploited chromatographic approaches

Impacts of microplastic decomposition using heat-activated persulfate on antibiotic adsorption and environmental toxicity

The objective of this study was to determine microplastic-antibiotic interaction by examining how heat-activated persulfate decomposed polyamide adsorbed antibiotics and explored the environmental consequences of treated water. Sulfate radicals roughened the microplastic surfaces, significantly enhancing the adsorption capacity of polyamide. The kinetic and isotherm studies provided confirmation that electrostatic interactions were the primary mechanisms, with a minor contribution from H-bonding, highlighting that antibiotic adsorption was prone to occur, especially on the aged surface. Thermodynamic data indicated that the process was spontaneous and exothermic. The results showed significant negative effects of treated water on seed germination, copepod survival, and cell lines at only a higher concentration, due to a decrease in pH and the potential presence of polymer degradates. Our findings revealed the significant impact of decomposed polyamide on the antibiotic adsorption and offered insight into the potential harm that microplastic-treated water might cause to aquatic and marine ecosystems.

Microplastics in aquatic systems: An in-depth review of current and potential water treatment processes

Plastic products, despite their undeniable utility in modern life, pose significant environmental challenges, particularly when it comes to recycling. A crucial concern is the pervasive introduction of microplastics (MPs) into aquatic ecosystems, with deleterious effects on marine organisms. This review presents a detailed examination of the methodologies developed for MPs removal in water treatment systems. Initially, investigating the most common types of MPs in wastewater, subsequently presenting methodologies for their precise identification and quantification in aquatic environments. Instruments such as scanning electron microscopy, dynamic light scattering, Fourier transform infrared spectroscopy, Raman spectroscopy, surface-enhanced Raman spectroscopy, and Raman tweezers stand out as powerful tools for studying MPs. The discussion then transitions to the exploration of both existing and emergent techniques for MPs removal in wastewater treatment plants and drinking water treatment plants. This includes a description of the core mechanisms that drive these techniques, with an emphasis on the latest research developments in MPs degradation. Present MPs removal methodologies, ranging from physical separation to chemical and biological adsorption and degradation, offer varied advantages and constraints. Addressing the MPs contamination problem in its entirety remains a significant challenge. In conclusion, the review offers a succinct overview of each technique and forwards recommendations for future research, highlighting the pressing nature of this environmental dilemma.

Microplastics as vectors of other contaminants: Analytical determination techniques and remediation methods

The ubiquitous and persistent presence of microplastics (MPs) in aquatic and terrestrial ecosystems has raised global concerns due to their detrimental effects on human health and the natural environment. These minuscule plastic fragments not only threaten biodiversity but also serve as vectors for contaminants, absorbing organic and inorganic pollutants, thereby causing a range of health and environmental issues. This review provides an overview of microplastics and their effects. This work highlights available analytical techniques for detecting and characterizing microplastics in different environmental matrices, assessing their advantages and limitations. Additionally, this review explores innovative remediation approaches, such as microbial degradation and other advanced methods, offering promising prospects for combatting microplastic accumulation in contaminated environments. The focus on environmentally-friendly technologies, such as the use of microorganisms and enzymes for microplastic degradation, underscores the importance of sustainable solutions in plastic pollution management. In conclusion, this article not only deepens our understanding of the microplastic issue and its impact but also advocates for the urgent need to develop and implement effective strategies to mitigate this critical environmental challenge. In this context, the crucial role of advanced technologies, like quantitative Nuclear Magnetic Resonance spectroscopy (qNMR), as promising tools for rapid and efficient microplastic detection, is emphasized. Furthermore, the potential of the enzyme PETase (polyethylene terephthalate esterase) in microplastic degradation is examined, aiming to address the growing plastic pollution, particularly in saline environments like oceanic ecosystems. These innovations offer hope for effectively addressing microplastic accumulation in contaminated environments and minimizing its adverse impacts.

Identification of Plastics in Mixtures and Blends through Pyrolysis-Gas Chromatography/Mass Spectrometry

In this paper, the possibility of detecting polymers in plastic mixtures and extruded blends has been investigated. Pyrolysis-gas chromatography/mass spectrometry (py-GC/MS) allows researchers to identify multicomponent mixtures and low amounts of polymers without high spatial resolution, background noise and constituents mix interfering, as with molecular spectrometry techniques normally used for this purpose, such as Fourier transform infrared spectroscopy (FTIR) and Raman spectroscopy and differential scanning calorimetry (DSC). In total, 15 solid mixtures of low-density polyethylene (LDPE), polypropylene (PP), polystyrene (PS), polyamide (PA) and polycarbonate (PC) in various combinations have been qualitatively analyzed after choosing their characteristic pyrolysis products and each polymer has been detected in every mix; thus, in extruded blends of high-density polyethylene (HDPE), PP and PS had varying weight percentages of the individual constituents ranging from 10 up to 90. Moreover, quantitative analysis of these polymers has been achieved in every blend with a trend that can be considered linear with coefficients of determination higher than 0.9, even though the limits of quantification are lower with respect to the ones reported in the literature, probably due to the extrusion process.

A standard analytical approach and establishing criteria for microplastic concentrations in wastewater, drinking water and tap water

The ubiquitous presence of microplastics (MPs) in natural water bodies reflects the global issue regarding these micropollutants. The main problem of MPs lies on the difficulty of removing these particles from water during wastewater and drinking water treatments. The release of MPs to the environment in treated wastewater contributed to the dispersion of these micropollutants, which enhances the harmful effect of MPs on fauna and flora. In addition, their presence in tap water entails a potential risk to human health since MPs can be directly consumed. The first step is being able to quantify and characterise these microparticles accurately. In this work, a comprehensive analysis on the presence of MPs in wastewater, drinking water and tap water has been conducted with emphasis on sampling methods, pre-treatment, MP size and analytical methods. Based on literature data, a standard experimental procedure has been proposed with the objective of recommending a methodology that allows the homogenisation of MP analysis in water samples. Finally, reported MP concentrations for influents and effluents of drinking and wastewater treatment plants and tap water have been analysed, in terms of abundance, ranges and average values, and a tentative classification of different waters based on their MP concentrations is proposed.

Occurrence of microplastics and disturbance of gut microbiota: a pilot study of preschool children in Xiamen, China

BACKGROUND

Microplastics (MPs) have garnered widespread attention because of their presence in human placenta, stool, and even blood. Ingestion is considered the major route of human exposure to MPs. It has been found that the consumption of food and water is associated with more MP abundance in human stools. The usage of plastic containers, particularly feeding bottles, may be a major contributor to MP contamination. However, human exposure to MPs and potential factors that influence exposure, especially for preschoolers, remains largely unknown. When exposed to MPs, mice exhibited gut microbiota dysbiosis, including alterations in diversity indices, a decreased relative abundance of probiotics and an increased abundance of pathogenic bacteria. Such results have also been observed in human gut in vitro models, however, the actual association between MP exposure and human intestinal microbiota remains unclear. Therefore, this study aimed to evaluate MP concentrations in preschoolers' stools, explore possible dietary factors that influence preschooler exposure to MPs, and investigate their potential association with the gut microbiota.

METHODS

A cross-sectional study was conducted in Xiamen, China in October 2022. We investigated the feeding behaviours and dietary habits of preschool children. A total of 69 couples of stool samples were collected and analyzed for MPs test and gut microbiota analysis. Pyrolysis-gas chromatography coupled with mass spectrometry (Py-GC/MS) was used for quantifying 11 types of MPs. The gut microbiota composition was analyzed by 16S rRNA gene sequencing.

FINDINGS

The results showed that only polyvinyl chloride (PVC), polyethylene terephthalate (PET), polyethylene (PE), and polyamide 6 (PA6) were detected in 85.5% stool samples, with concentrations of 317.4 (152.0, 491.9) μg/g dw, 299.0 (196.1, 619.9) μg/g dw, 206.2 (154.1, 240.3) μg/g dw, and 17.9 (13.4, 18.6) μg/g dw, respectively. The median estimated daily intake (EDI) for preschoolers was 425.9 (272.5, 762.3) μg/kg-bw/d. Dairy intake may influence MP concentration in preschoolers' stools, and the usage of feeding bottles may be a specific source of MP contamination. Moreover, higher PVC concentrations were observed in the stools when the children took more time to eat a meal. MP exposure was inversely associated with alpha indices and possibly affected certain probiotic taxa, such as Parabacteroides and Alistipes, in preschool children.

INTERPRETATION

Our data provided baseline evidence for MP exposure doses and potential dietary factors that may influence MP exposure in preschoolers. These findings supported the perspective that MP exposure might be associated with the disturbance of gut microbiota. Further studies focusing on sensitive populations with larger sample sizes are needed.

FUNDING

This study was funded by the National Natural Science Foundation of China (grant number: 82003412), the Shanghai Municipal Health Commission (grant number: 20214Y0019), and the Project of Shanghai Municipal Financial Professional foundation (Food Safety Risk Assessment) (grant number: RA-2022-06).

Phthalate acid esters contribute to the cytotoxicity of mask leachate: Cell-based assay for toxicity assessment

After the COVID-19 outbreak, masks have become an essential part of people lives. Although several studies have been conducted to determine the release of hazardous substances from masks, how their co-presence poses a potential exposure risk to human health remains unexplored. In this study, we quantitatively compared the leaching of substances from six different common types of masks, including phthalate acid esters (PAEs), metals, and microplastics (MPs), and comprehensively evaluated the potential cytotoxicity of different leachates. MPs smaller than 3 µm were quantified by Py-GC-MS, and reusable masks showed greater releasing potentials up to 1504 µg/g. We also detected the prevalence of PAEs in masks, with the highest release reaching 42 μg/g, with dibutyl phthalate (DBP), diisobutyl phthalate (DiBP) and bis (2-ethylhexyl) phthalate (DEHP) being the predominant types. Moreover, the antimicrobial cloth masks released 173.0 µg of Cu or 4.5 µg of Ag, representing 2.7% and 0.04% of the original masks, respectively. Our cell-based assay results demonstrated for the first time that mask leachate induced nuclear condensation with DNA damage, and simultaneously triggered high levels of glutathione and reactive oxidative stress production, which exacerbated mitochondrial fragmentation, eventually leading to cell death. Combined with substance identification and correlation analysis, PAEs were found to be the contributors to cytotoxicity. Masks containing Cu or Ag led to acidification of lysosomes and alkalinization of cells. These results strongly suggested that the levels of PAEs in the production of regulatory masks should be strictly controlled.

Adsorption of Per- and Polyfluoroalkyl Substances (PFAS) and Microcystins by Virgin and Weathered Microplastics in Freshwater Matrices

Microplastics and per- and polyfluoroalkyl substances (PFAS) both represent persistent groups of environmental contaminants that have been associated with human health risks. Microcystin toxins are produced and stored in the cells of cyanobacteria and may be released into sources of drinking water. Recent concerns have emerged regarding the ability of microplastics to adsorb a range of organic contaminants, including PFAS and microcystins. This study examined the adsorption of two long-chain and two short-chain PFAS, as well as two common microcystins, by both virgin and weathered microplastics in freshwater. Natural weathering of microplastic surfaces may decrease adsorption by introducing hydrophilic oxygen-containing functional groups. Up to 50% adsorption of perfluorooctanesulfonic acid (PFOS) was observed for virgin PVC compared to 38% for weathered PVC. In contrast, adsorption capacities for microcystins by virgin LDPE were approximately 5.0 µg/g whereas no adsorption was observed following weathering. These results suggest that adsorption is driven by specific polymer types and dominated by hydrophobic interactions. This is the first known study to quantify PFAS and microcystins adsorption when considering environmentally relevant concentrations as well as weathered microplastics.

Microplastics exposure and immunologic response

OBJECTIVE

To assess the impact of microplastics (MPs) on human health.

DATA SOURCE

The authors conducted a non-systematic review of articles published in English, Portuguese, French, and Spanish in the last decade in the following databases: PubMed, Google Scholar, EMBASE, and SciELO. The keywords used were: microplastics OR nanoplastics OR marine litter OR toxicology OR additives AND human health OR children OR adults.

DATA SUMMARY

MPs are a group of emerging contaminants that have attracted scientific interest and societal attention in the last decade due to their ubiquitous detection in all environments. Humans can primarily be exposed to MPs and nanoplastics via oral and inhalation routes, but dermal contact cannot be overlooked, especially in young children. The possible toxic effects of plastic particles are due to their potential toxicity, often combined with that of leachable additives and adsorbed contaminants.

CONCLUSIONS

Unless the plastic value chain is transformed over the next two decades, the risks to species, marine ecosystems, climate, health, economy, and communities will be unmanageable. However, along with these risks are the unique opportunities to help transition to a more sustainable world.

Study on the Extraction Method of Microplastic System in Textile Wastewater

Microplastic pollution has become a global environmental problem. Textile microplastics are an important component of microplastic pollution, but little is known about their contamination in the industrial environment. The lack of standardized methods for detecting and quantifying textile microplastics is a major obstacle to determining the risks they pose to the natural environment. This study systematically examines the pretreatment options for the extraction of microplastics from printing and dyeing wastewater. The effectiveness of potassium hydroxide, nitric acid–hydrogen peroxide mixed solution, hydrogen peroxide, and Fenton’s reagent for the removal of organic matter from textile wastewater is compared. Three textile microplastics, polyethylene terephthalate, polyamide, and polyurethane, are studied. The effects of the digestion treatment on the physicochemical properties of textile microplastics are characterized. The separation efficiency of sodium chloride, zinc chloride, sodium bromide, sodium iodide, and sodium chloride-sodium iodide mixed solution on the textile microplastics is tested. The results showed that Fenton’s reagent achieved a 78% removal rate of organic matter from printing and dyeing wastewater. Meanwhile, it has less of an effect on the physicochemical properties of textile microplastics after digestion and is the best reagent for digestion. The zinc chloride solution achieved a 90% recovery for separating textile microplastics with good reproducibility. It does not affect the subsequent characterization analysis after separation and is the best solution for density separation.

Microplastic: A particulate matter(PM) generated by deterioration of building materials

Particulate matter (PM), an inhalable material, is generated from various sources, including building materials. To maintain indoor air quality, it is necessary to analyze harmful substances and establish a method for their remediation. The purpose of this study is to identify the particles generated during the deterioration of building materials and analyze the composition of fine dust particles with respect to the degree of deterioration. The concentration of particles generated was analyzed using an SPS30 PM sensor in the built chamber. PM10 and PM2.5 levels of the maximum of 41.95 mg/m³ and 20.63 mg/m³, respectively, were generated from the tested building materials. The components of the collected PM were carbon, hydrogen, and silicon, among others, which are high-molecular-weight compounds. Particles of size 2.5 µm or less were detected, and the possibility of generating nanoplastics was investigated.

Discrepancy strategies of sediment abundant and rare microbial communities in response to floating microplastic disturbances: Study using a microcosmic experiment

Floating microplastics (FMPs) in surface water have been extensively studied, but their influence on sedimentary microbial ecosystems is poorly understood. Here, we investigated response patterns of abundant and rare sedimentary microbes to FMP disturbances by performing microcosmic experiments using fluvial sediment with polyethylene (PE), polylactic acid (PLA), polystyrene (PS) and polyvinyl chloride (PVC) MPs. The results indicated that FMPs altered sediment microbial community diversity and composition. Some organic-degrading, nitrifying and denitrifying bacteria significantly decreased in response to FMP disturbances, which may affect the sediment carbon and nitrogen cycles. Rare taxa persisted under FMP disturbances, whereas abundant taxa were more susceptible to FMP disturbances, suggesting a higher sensitivity of abundant taxa to FMP disturbances. Although stochastic processes governed the assembly of the overall microbial communities, the assembly mechanisms of abundant and rare populations have significantly different responses to FMP interference. The relative contribution of deterministic processes was reinforced by enhanced homogenous selection in abundant populations, while it markedly decreased in rare populations under FMP disturbances. Furthermore, FMPs substantially decreased the network complexity, loosened the coexistence relationships, and increased the negative correlations. Rare species play an important role in reshaping complex microbial interactions and coexistence networks in response to FMP disturbances. This research broadens our perspectives for comprehensively evaluating the ecological effects of FMPs in the aquatic environment to formulate further policy controls.

Pyrolysis-GC-MS analysis of ingested polystyrene microsphere content in individual Daphnia magna

Microplastic (MP) pollution in the aquatic environment is a cause for increasing concern. However, analyzing MPs ingested by small organisms, such as zooplankton, is difficult because of the low content and small size of the ingested MPs. We attempted to determine the content of ingested MPs in individual zooplankton using pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS). To establish zooplankton model of MP ingestion, individual Daphnia magna were cultivated separately in microplate cells with polystyrene (PS) microspheres (10 μm in diameter, 245,000 particles, 135 μg) under different conditions. To prepare calibration curves for determining ingested PS content, approximately 100-150 μg of commercially available Daphnia-based powdered fish food, roughly corresponding to the weight of a single D. magna organism, was mixed with PS microspheres (0.005-26 μg) and analyzed using Py-GC-MS at 600 °C. In the resulting pyrograms, peaks of the styrene monomer and trimer from PS were detected, and linear relationships were obtained between the relative peak area and the amount of added PS. Finally, the cultivated zooplankton were individually subjected to Py-GC-MS analysis, and the ingested PS content in each zooplankton was successfully determined. Individual zooplankton cultured with PS in the absence of food ingested 2.3-7.9 μg of PS particles, whereas that in the presence of food (Chlorella vulgaris) ingested only 0.1-0.2 μg of PS particles. This result suggests that zooplankton might preferentially ingest ordinary food when both food and MPs are present, although further systematic studies are necessary to validate this observation.

Review of Microplastic Distribution, Toxicity, Analysis Methods, and Removal Technologies

Microplastic contamination has become a problem, as plastic production has increased worldwide. Microplastics are plastics with particles of less than 5 mm and are absorbed through soil, water, atmosphere, and living organisms and finally affect human health. However, information on the distribution, toxicity, analytical methods, and removal techniques for microplastics is insufficient. For clear microplastic analytical methods and removal technologies, this article includes the following: (1) The distribution and contamination pathways of microplastics worldwide are reviewed. (2) The health effects and toxicity of microplastics were researched. (3) The sampling, pretreatment, and analytical methods of microplastics were all reviewed through various related articles. (4) The various removal techniques of microplastics were categorized by wastewater treatment process, physical treatment, chemical treatment, and biological treatment. This paper will be of great help to microplastic analysis and removal techniques.