Highly effective enzymes immobilization on ceramics: Requirements for supports and enzymes

A sustainable approach to dye degradation: Horseradish peroxidase immobilization on hybrid chitosan-coated magnesium manganese oxide materials

This study explores the potential of chitosan-coated magnesium manganese oxide (CS-MgMn2O4) as a robust support material for horseradish peroxidase (HRP) immobilization, aiming to increase its catalytic efficiency and reusability. The CS-MgMn2O4 matrix, synthesized via a green chemistry approach, was characterized for its structural and surface properties using techniques such as FTIR, SEM, BET, and XRD. Compared with free HRP, immobilized enzyme presented improved kinetic parameters, thermal stability, and solvent tolerance. The optimal conditions for enzymatic activity were identified, including a pH of 6.0 and a catalyst dosage of 30 mg, achieving a maximum methyl orange (MO) degradation efficiency of 78 % within 5 h. The degradation efficiency peaked at 91 % under optimal substrate concentration (20 mg/L MO), with a decrease at higher concentrations. Additionally, the immobilized HRP demonstrated excellent reusability, retaining 59 % of its activity after five cycles. These results underscore the advantages of CS-MgMn2O4 as a hybrid material that combines high porosity, biocompatibility, and structural stability, to overcome the limitations associated with free enzymes. This study provides a sustainable and efficient strategy for dye degradation in wastewater treatment, highlighting the potential of enzyme immobilization on advanced hybrid materials for environmental applications.

Sustainable synthesis of alginate-cobalt ferrite nanocomposites for horseradish peroxidase immobilization: enhanced stability, reusability, and catalytic efficiency

This study explores the green synthesis of an alginate-cobalt ferrite (Alg-CoFe2O4) composite using Brachychiton populneus extract for horseradish peroxidase (HRP) immobilization, targeting enhanced enzyme stability and reusability. The Alg-CoFe2O4 composite, synthesized via co-precipitation and calcination at 600 °C, was characterized using XRD, VSM, SEM-EDX, BET, FT-IR, and zeta potential analysis, confirming its structural, magnetic, and surface properties. HRP immobilization via glutaraldehyde crosslinking achieved a high immobilization yield of 84%, attributed to the composite's high surface area and covalent binding efficiency. Kinetic analysis revealed an increased Km (30 mM) and Vmax (5.88 µmol/min) for HRP@Alg-CoFe2O4, indicating enhanced catalytic efficiency with reduced substrate affinity. The immobilized enzyme exhibited superior tolerance to organic solvents, retaining 149% activity in n-hexane. In addition, it retained 71% activity after 10 cycles and 74% after 8 weeks of storage at 4 °C, outperforming free HRP. Optimal conditions shifted from pH 6.5 to 7.0 and from 50 to 60 °C, reflecting improved environmental resilience. This study highlights HRP@Alg-CoFe2O4 as a robust biocatalyst, offering promising applications in wastewater treatment and industrial bioprocesses.

Characterization of a purified novel Aureobasidium pullulans NAC8 lipase and covalent-immobilization for use in the biodegradation of oil-contaminated wastewater

The aim of this study was to purify, characterize, and evaluate the potential of the immobilized extracellular lipase from Aureobasidium pullulans NAC8 (ApL) for the biodegradation of oil-contaminated wastewater. ApL was purified using aqueous two-phase partitioning (ATPS) and its biochemical properties determined. The enzyme was then covalently immobilized and characterized through Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). The performance of immobilized ApL in oil-contaminated wastewater was tested for its ability to remove chemical oxygen demand (COD), hydrolyze lipids, and produce free fatty acids. The purification fold and yield of ApL were 3.5 and 66 %, respectively. The purified enzyme had a subunit molecular weight of 30 kDa, with an optimum pH of 6.5 and an optimum temperature of 50 °C. The enzyme's catalytic efficiency for pNPP and pNPB was 1.53 × 105 and 2.3 × 105 in aqueous media, and 1.74 × 105 and 2.7 × 105 in organic solvent. Thermodynamic analysis revealed values for ∆H* (16.4 kJ/mol), ∆S* (-214 J/mol/K), and ∆G* (70.1-88.4 kJ/mol), indicating stability against thermal denaturation between 40 and 70 °C. The immobilized enzyme retained 70 % of its activity after ten catalytic cycles. In oil-contaminated wastewater, it achieved 83 % COD removal, 7.4 % lipid hydrolysis, and 15 % free fatty acid production after five cycles. The biochemical characteristics of the purified and immobilized ApL suggest that it has significant potential for industrial applications, particularly in the biodegradation of oil-contaminated wastewater. Its stability and high catalytic efficiency make it a promising candidate for long-term environmental and industrial use.

An overview of additive manufacturing strategies of enzyme-immobilized nanomaterials with application incatalysis and biomedicine

Meticulous and bespoke fabrication of structural materials with simple yet innovative outlines along with on-demand availability is the imperative aspiration for numerous fields. The alliance between nanotechnology and enzymes has led to the establishment of an inimitable and proficient class of materials. With the advancement in the field of additive manufacturing, the fabrication of some complex biological architects is achievable with similitude to the instinctive microenvironment of the biological tissue. Rendering these enzymes-linked nanomaterials through 3D printing for biosensing, catalytic, and biomedical applications is challenging due to the need for a precise controlled, regulated system with scaleup capability for commercialization. The current review highlights the importance of nanomaterials as a persuasive matrix for enzyme immobilization along with the key parameters that regulate the rate of immobilization and the activity of the concerned enzyme. Precise attention has been devoted to the different strategies for immobilizing enzymes in the nanomaterial's matrix. The present review offers a comprehensive discussion on the utility of 3D printing technology for enzyme-immobilized nanomaterials in biosensing, catalysis, and biomedical applications. The employment of 3D printing grants new developments and avenues in the vast field of enzyme- immobilized nanomaterials.

Immobilization of soybean peroxidase enzyme on hierarchical zeolite-ordered mesoporous carbon nanocomposite and its activity

Immobilization of enzymes on inorganic supports such as silica and carbon materials is an effective approach for chemical surface modification. In this work, hierarchical zeolite (HZ-SAPO's) materials were fabricated by a modified method, and mesoporous carbon (CMK-3) was synthesized using the SBA-15 mesoporous silica as a template. A variety of biocatalysts was prepared using HZ-SAPO with CMK to furnish the nanocomposite biocatalyst. The functionalization of amine group with APTES was done which was further immobilized by Soybean Peroxidase (SBP) enzyme. The material was subjected to a comprehensive characterization process utilizing numerous systematic methods, including X-ray diffraction, N2 adsorption-desorption isotherms, Raman spectroscopy, scanning electron microscopy, high-resolution transmittance electron microscopy, and attenuated total reflectance Fourier transform infrared spectroscopy. The pH effect on the immobilized enzyme was examined and compared to that of SBP. Further, the assessment of repeated usability of immobilized SBP with successive cycles was carried out.

The current research status of immobilized lipase performance and its potential for application in food are developing toward green and healthy direction: A review

Immobilized lipases have received great attention in food, environment, medicine, and other fields due to their easy separation, high stability (temperature, pH), and high storage properties. After immobilization, lipase transforms from a homogeneous to a heterogeneous state, making it easier to recover from the reaction substrate and achieve recycling, which is in line with the concept of green chemistry and reduces protein contamination in the product. There are various materials for enzyme immobilization, including polysaccharides from natural sources, inorganic compounds, carbon nanotubes, metal-organic framework materials, and so forth. Magnetic immobilization carriers have been widely studied due to their ability to achieve separation by adding a magnetic field. Its immobilization method can be simply divided into two categories: physical action (adsorption, embedding) and chemical binding (covalent, cross-linking). Some studies mainly discuss the immobilization support materials, immobilization methods, and applications of immobilized lipases in food. On this basis, our review also focuses on the changes in crosslinking agents for immobilized lipases, different methods to promote immobilization, new trends in the study of immobilized lipases, and proposes prospects for immobilized lipase research in the food industry.

Functionalization of Polyethylene Terephthalate (PETE) Membranes for the Enhancement of Cellular Adhesion in Organ-on-a-Chip Devices

Experimental reproducibility in organ-on-chip (OOC) devices is a challenging issue, mainly caused by cell adhesion problems, as OOC devices are made of bioinert materials not suitable for natural cellularization of their surfaces. To improve cell adhesion, several surface functionalization techniques have been proposed, among which the simple use of an intermediate layer of adsorbed proteins has become the preferred one by OOC users. This way, the cells use surface receptors to adhere to the adsorbed proteins, which are in turn attached to the surface. However, as protein adsorption is based on weak electrostatic bonding between the coating proteins and the substrate, this method produces suboptimal results: as the weak electrostatic bonds break, cells detach, leading to poor, heterogeneous cellularization. To solve this problem, we present a surface functionalization method for polyethylene terephthalate (PETE) membranes, commonly used in multilayer organ-on-chip devices to support cellular layers. This protocol involves hydrolyzation of the membrane, followed by (3-dimethylaminopropyl) carbodiimide (EDC) and N-hydroxysuccinimide (NHS) activation, resulting in covalent bonding between the membrane and coating proteins, much stronger than the weak electrostatic bonding provided by simple adsorption. As evaluation, we first measured the effect of the functionalization protocol in the morphological and mechanical integrity of the membranes. Next, we confirmed protein coating efficiency using the ζ potential and surface tension of the functionalized membranes coated with collagen type I, polylysine, gelatin, albumin, fetal bovine serum (FBS), and Matrigel. Finally, we showed that our method significantly improves the attachment of epithelial (A549) and endothelial (EA.hy926) cell lines under static conditions, especially in collagen-coated membranes, which were further tested under dynamic conditions, showing statistically significant improvement in cell attachment compared to uncoated or collagen-adsorbed only membranes.

3D Printing in Biocatalysis and Biosensing: From General Concepts to Practical Applications

3D printing has matured into a versatile technique that offers researchers many different printing methods and materials with varying properties. Nowadays, 3D printing is deployed within a myriad of different applications, ranging from chemistry to biotechnology -including bioanalytics, biocatalysis or biosensing. Due to its inherent design flexibility (which enables rapid prototyping) and ease of use, 3D printing facilitates the relatively quick and easy creation of new devices with unprecedented functions.. This review article describes how 3D printing can be employed for research in the fields of biochemistry and biotechnology, and specifically for biocatalysis and biosensor applications. We survey different relevant 3D printing techniques, as well as the surface activation and functionalization of 3D-printed materials. Finally, we show how 3D printing is used for the fabrication of reaction ware and enzymatic assays in biocatalysis research, as well as for the generation of biosensors using aptamers, antibodies, and enzymes as recognition elements.

Green and Fast Synthesis of NiCo-MOF for Simultaneous Purification-Immobilization of Bienzyme to Catalyze the Synthesis of Ginsenoside Rh2

Traditional metal-organic frameworks (MOFs) preparation is generally time-consuming, polluting, and lacking specificity for enzyme immobilization. This paper introduced a facile, rapid, and green method to produce three MOFs subsequently employed to purify and coimmobilize recombinant glycosyltransferase (UGT) and recombinant sucrose synthetase (SUSy) using histidine tag (His-tag) for the specific adsorption of Ni2+ and Co2+ from MOFs. This method simplified enzyme purification from crude extracts and enabled enzymes to be reused. The results demonstrated that NiCo-MOF exhibited a higher enzyme load (115.9 mg/g) than monometallic MOFs. Additionally, the NiCo-MOF@UGT&SUSy demonstrated excellent stability and efficiently produced the rare ginsenoside Rh2 by catalyzing a coupling reaction (95.6 μg/mL), solving the problem of the substrate cost of uridine diphosphate glucose (UDPG). The NiCo-MOF@UGT&SUSy retained 68.97% of the initial activity after 10 cycles. Finally, molecular docking studies elucidated the conversion mechanism of the target product Rh2. This technique is important in the industrialization of ginsenoside production and enzyme purification.

Advances in aldo-keto reductases immobilization for biocatalytic synthesis of chiral alcohols

Chiral alcohols are essential building blocks of numerous pharmaceuticals and fine chemicals. Aldo-keto reductases (AKRs) constitute a superfamily of oxidoreductases that catalyze the reduction of aldehydes and ketones to their corresponding alcohols using NAD(P)H as a coenzyme. Knowledge about the crucial roles of AKRs immobilization in the biocatalytic synthesis of chiral alcohols is expanding. Herein, we reviewed the characteristics of various AKRs immobilization approaches, the applications of different immobilization materials, and the prospects of continuous flow bioreactor construction by employing these immobilized biocatalysts for synthesizing chiral alcohols. Finally, the opportunities and ongoing challenges for AKR immobilization are discussed and the outlook for this emerging area is analyzed.

Bioremediation of Hazardous Pollutants Using Enzyme-Immobilized Reactors

Bioremediation uses the degradation abilities of microorganisms and other organisms to remove harmful pollutants that pollute the natural environment, helping return it to a natural state that is free of harmful substances. Organism-derived enzymes can degrade and eliminate a variety of pollutants and transform them into non-toxic forms; as such, they are expected to be used in bioremediation. However, since enzymes are proteins, the low operational stability and catalytic efficiency of free enzyme-based degradation systems need improvement. Enzyme immobilization methods are often used to overcome these challenges. Several enzyme immobilization methods have been applied to improve operational stability and reduce remediation costs. Herein, we review recent advancements in immobilized enzymes for bioremediation and summarize the methods for preparing immobilized enzymes for use as catalysts and in pollutant degradation systems. Additionally, the advantages, limitations, and future perspectives of immobilized enzymes in bioremediation are discussed.

Enhancing biocatalyst performance through immobilization of lipase (Eversa® Transform 2.0) on hybrid amine-epoxy core-shell magnetic nanoparticles

Magnetic nanoparticles were functionalized with polyethylenimine (PEI) and activated with epoxy. This support was used to immobilize Lipase (Eversa® Transform 2.0) (EVS), optimization using the Taguchi method. XRF, SEM, TEM, XRD, FTIR, TGA, and VSM performed the characterizations. The optimal conditions were immobilization yield (I.Y.) of 95.04 ± 0.79 %, time of 15 h, ionic load of 95 mM, protein load of 5 mg/g, and temperature of 25 °C. The maximum loading capacity was 25 mg/g, and its stability in 60 days of storage showed a negligible loss of only 9.53 % of its activity. The biocatalyst demonstrated better stability at varying temperatures than free EVS, maintaining 28 % of its activity at 70 °C. It was feasible to esterify free fatty acids (FFA) from babassu oil with the best reaction of 97.91 % and ten cycles having an efficiency above 50 %. The esterification of produced biolubricant was confirmed by NMR, and it displayed kinematic viscosity and density of 6.052 mm2/s and 0.832 g/cm3, respectively, at 40 °C. The in-silico study showed a binding affinity of -5.8 kcal/mol between EVS and oleic acid, suggesting a stable substrate-lipase combination suitable for esterification.

Role of Clay Substrate Molecular Interactions in Some Dairy Technology Applications

The use of clay materials in dairy technology requires a multidisciplinary approach that allows correlating clay efficiency in the targeted application to its interactions with milk components. For profitability reasons, natural clays and clay minerals can be used as low-cost and harmless food-compatible materials for improving key processes such as fermentation and coagulation. Under chemical stability conditions, clay materials can act as adsorbents, since anionic clay minerals such as hydrotalcite already showed effectiveness in the continuous removal of lactic acid via in situ anion exchange during fermentation and ex situ regeneration by ozone. Raw and modified bentonites and smectites have also been used as adsorbents in aflatoxin retention and as acidic species in milk acidification and coagulation. Aflatoxins and organophilic milk components, particularly non-charged caseins around their isoelectric points, are expected to display high affinity towards high silica regions on the clay surface. Here, clay interactions with milk components are key factors that govern adsorption and surface physicochemical processes. Knowledge about these interactions and changes in clay behavior according to the pH and chemical composition of the liquid media and, more importantly, clay chemical stability is an essential requirement for understanding process improvements in dairy technology, both upstream and downstream of milk production. The present paper provides a comprehensive review with deep analysis and synthesis of the main findings of studies in this area. This may be greatly useful for mastering milk processing efficiency and envisaging new prospects in dairy technology.

Recent applications and future prospects of magnetic biocatalysts

Magnetic biocatalysts combine magnetic properties with the catalytic activity of enzymes, achieving easy recovery and reuse in biotechnological processes. Lipases immobilized by magnetic nanoparticles dominate. This review covers an advanced bibliometric analysis and an overview of the area, elucidating research advances. Using WoS, 34,949 publications were analyzed and refined to 450. The prominent journals, countries, institutions, and authors that published the most were identified. The most cited articles showed research hotspots. The analysis of the themes and keywords identified five clusters and showed that the main field of research is associated with obtaining biofuels derived from different types of sustainable vegetable oils. The overview of magnetic biocatalysts showed that these materials are also employed in biosensors, photothermal therapy, environmental remediation, and medical applications. The industry shows a significant interest, with the number of patents increasing. Future studies should focus on immobilizing new lipases in unique materials with magnetic profiles, aiming to improve the efficiency for various biotechnological applications.

A critical review of enzymes immobilized on chitosan composites: characterization and applications

Enzymes with industrial significance are typically used in biological processes. However, instability, high sensitivity, and impractical recovery are the major drawbacks of enzymes in practical applications. In recent years, the immobilization technology has attracted wide attention to overcoming these restrictions and improving the efficiency of enzyme applications. Chitosan (CS) is a unique functional substance with biocompatibility, biodegradability, non-toxicity, and antibacterial properties. Chitosan composites are anticipated to be widely used in the near future for a variety of purposes, including as supports for enzyme immobilization, because of their advantages. Therefor this review explores the effects of the chitosan's structure, molecular weight, degree of deacetylation on the enzyme immobilized, effect of key factors, and the enzymes immobilized on chitosan based composites for numerous applications, including the fields of biosensor, biomedical science, food industry, environmental protection, and industrial production. Moreover, this study carefully investigates the advantages and disadvantages of using these composites as well as their potential in the future.

Surfactant-based metal-organic frameworks (MOFs) in the preparation of an active biocatalysis

Metal-organic frameworks (MOFs) are used as ideal support materials thanks to their unique properties and have become the focus of interest in enzyme immobilization studies, especially in recent years. In order to increase the catalytic activity and stability of Candida rugosa lipase (CRL), a new fluorescence-based MOF (UiO-66-Nap) derived from UiO-66 was synthesized. The structures of the materials were confirmed by spectroscopic techniques such as FTIR, ¹H NMR, SEM, and PXRD. CRL was immobilized on UiO-66-NH₂ and UiO-66-Nap by adsorption technique and immobilization and stability parameters of UiO-66-Nap@CRL were examined. Immobilized lipases UiO-66-Nap@CRL exhibited higher catalytic activity (204 U/g) than UiO-66-NH₂@CRL (168 U/g), which indicates that the immobilized lipase (UiO-66-Nap@CRL) carries sulfonate groups, this is due to strong ionic interactions between the surfactant's polar groups and certain charged locations on the protein surface. The Free CRL lost its catalytic activity completely at 60 °C after 100min, while UiO-66-NH₂@CRL and UiO-66-Nap@CRL retained 45% and 56% of their catalytic activity at the end of 120min, respectively. After 5 cycles, the activity of UiO-66-Nap@CRL remained 50%, while the activity of UiO-66-NH₂@CRL was about 40%. This difference is due to the surfactant groups (Nap) in UiO-66-Nap@CRL. These results show that the newly synthesized fluorescence-based MOF derivative (UiO-66-Nap) can be an ideal support material for enzyme immobilization and can be used successfully to protect and increase the activities of enzymes.

Mesoporous Polymeric Ionic Liquid via Confined Polymerization for Laccase Immobilization towards Efficient Degradation of Phenolic Pollutants

Laccase immobilization is a promising method that can be used for the recyclable treatment of refractory phenolic pollutants (e.g., chlorophenols) under mild conditions, but the method is still hindered by the trade-off limits of supports in terms of their high specific surface area and rich functional groups. Herein, confined polymerization was applied to create abundant amino-functionalized polymeric ionic liquids (PILs) featuring a highly specific surface area and mesoporous structure for chemically immobilizing laccase. Benefiting from this strategy, the specific surface area of the as-synthesized PILs was significantly increased by 60-fold, from 5 to 302 m2/g. Further, a maximum activity recovery of 82% towards laccase was recorded. The tolerance and circulation of the immobilized laccase under harsh operating conditions were significantly improved, and the immobilized laccase retained more than 84% of its initial activity after 15 days. After 10 cycles, the immobilized laccase was still able to maintain 80% of its activity. Compared with the free laccase, the immobilized laccase exhibited enhanced stability in the biodegradation of 2,4-dichlorophenol (2,4-DCP), recording around 80% (seven cycles) efficiency. It is proposed that the synergistic effect between PILs and laccase plays an important role in the enhancement of stability and activity in phenolic pollutant degradation. This work provides a strategy for the development of synthetic methods for PILs and the improvement of immobilized laccase stability.

Covalent conjugation of proteins onto fluorescent single-walled carbon nanotubes for biological and medical applications

Single-walled carbon nanotubes (SWCNTs) have optical properties that are conducive for biological applications such as sensing, delivery, and imaging. These applications necessitate the immobilization of macromolecules that can serve as therapeutic drugs, molecular templates, or modulators of surface interactions. Although previous studies have focused on non-covalent immobilization strategies, recent advances have introduced covalent functional handles that can preserve or even enhance the SWCNT optical properties. This review presents an overview of covalent sidewall modifications of SWCNTs, with a focus on the latest generation of "sp³ defect" modifications. We summarize and compare the reaction conditions and the reported products of these sp³ chemistries. We further review the underlying photophysics governing SWCNT fluorescence and apply these principles to the fluorescence emitted from these covalently modified SWCNTs. Finally, we provide an outlook on additional chemistries that could be applied to covalently conjugate proteins to these chemically modified, fluorescent SWCNTs. We review the advantages of these approaches, emerging opportunities for further improvement, as well as their implications for enabling new technologies.

Nano-fibrillated cellulose-based scaffolds for enzyme (co)-immobilization: Application to natural product glycosylation by Leloir glycosyltransferases

Polysaccharide-based scaffolds are promising carriers for enzyme immobilization. Here, we demonstrate a porous scaffold prepared by direct-ink-writing 3D printing of an ink consisting of nanofibrillated cellulose, carboxymethyl cellulose and citric acid for immobilization application. Negative surface charge introduced by the components made the scaffold amenable for an affinity-like immobilization via the cationic protein module Z_basic2. Z_basic2 fusions of two sugar nucleotide-dependent glycosyltransferases (C-glycosyltransferase, Z-CGT; sucrose synthase, Z-SuSy) were immobilized individually, or co-immobilized, and applied to synthesize the natural C-glycoside nothofagin. The cascade reaction involved β-C-glycosylation of phloretin (10 mM, ~90 % conversion) from UDP-glucose, provided from sucrose and catalytic amounts of UDP (1.0 mM). Enzymes were co-immobilized at ~65 mg protein/g carrier to receive activities of 9.5 U/g (Z-CGT) and 4.5 U/g (Z-SuSy) in 22-33 % yield (protein) and an effectiveness of 23 % (Z-CGT) and 13 % (Z-SuSy). The scaffold-bound enzymes were recyclable for 5 consecutive reactions.

Zinc sulfide-chitosan hybrid nanoparticles as a robust surface for immobilization of Sillago sihama α-amylase

In the present study, zinc sulfide-chitosan hybrid nanoparticles synthesized by chemical deposition were used as a matrix for the immobilization of purified α-amylase extracted from Sillago sihama (Forsskal, 1775). In this regard, the size and morphological structure of zinc sulfide-chitosan hybrid nanoparticles before and after the stabilization process were evaluated using FT-IR, DLS methods, as well as SEM and TEM electron microscopy, and EDS analyses. Then, the efficiency of the immobilized enzyme was measured in terms of temperature, optimal pH, stability at the critical temperature, and pH values. Immobilization of α-amylase on zinc sulfide -chitosan hybrid nanoparticles increased the long-term stability, as well as its endurance to critical temperatures and pH values; however, the optimal temperature and pH values of the enzyme were not altered following the immobilization process. The kinetic parameters of the enzyme were also changed during immobilization. Enzyme immobilization increased the K_m, whereas decreased the catalytic efficiency (K_cat / K_m) of the immobilized enzyme compared with the free enzyme. These results are very important as, in most cases, enzyme immobilization reduces the activity and catalytic efficiency of enzymes. The nano-enzyme produced in this study, due to its high temperature, and pH stability, could be a good candidate for industrial applications, especially in the food industry.

Controllable Enzyme Immobilization via Simple and Quantitative Adsorption of Dendronized Polymer-Enzyme Conjugates Inside a Silica Monolith for Enzymatic Flow-Through Reactor Applications

Although many different methods are known for the immobilization of enzymes on solid supports for use in flow-through applications as enzyme reactors, the reproducible immobilization of predetermined amounts of catalytically active enzyme molecules remains challenging. This challenge was tackled using a macro- and mesoporous silica monolith as a support and dendronized polymer-enzyme conjugates. The conjugates were first prepared in an aqueous solution by covalently linking enzyme molecules and either horseradish peroxidase (HRP) or bovine carbonic anhydrase (BCA) along the chains of a water-soluble second-generation dendronized polymer using an established procedure. The obtained conjugates are stable biohybrid structures in which the linking unit between the dendronized polymer and each enzyme molecule is a bisaryl hydrazone (BAH) bond. Quantitative and reproducible enzyme immobilization inside the monolith is possible by simply adding a defined volume of a conjugate solution of a defined enzyme concentration to a dry monolith piece of the desired size. In that way, (i) the entire volume of the conjugate solution is taken up by the monolith piece due to capillary forces and (ii) all conjugates of the added conjugate solution remain stably adsorbed (immobilized) noncovalently without detectable leakage from the monolith piece. The observed flow-through activity of the resulting enzyme reactors was directly proportional to the amount of conjugate used for the reactor preparation. With conjugate solutions consisting of defined amounts of both types of conjugates, the controlled coimmobilization of the two enzymes, namely, BCA and HRP, was shown to be possible in a simple way. Different stability tests of the enzyme reactors were carried out. Finally, the enzyme reactors were applied to the catalysis of a two-enzyme cascade reaction in two types of enzymatic flow-through reactor systems with either coimmobilized or sequentially immobilized BCA and HRP. Depending on the composition of the substrate solution that was pumped through the two types of enzyme reactor systems, the coimmobilized enzymes performed significantly better than the sequentially immobilized ones. This difference, however, is not due to a molecular proximity effect with regard to the enzymes but rather originates from the kinetic features of the cascade reaction used. Overall, the method developed for the controllable and reproducible immobilization of enzymes in the macro- and mesoporous silica monolith offers many possibilities for systematic investigations of immobilized enzymes in enzymatic flow-through reactors, potentially for any type of enzyme.

Advances in the application of immobilized enzyme for the remediation of hazardous pollutant: A review

Nowadays, ecofriendly, low-cost, and sustainable alternatives techniques have been focused on the effective removal of hazardous pollutants from the water streams. In this context, enzyme immobilization seems to be of specific interest to several researchers to develop novel, effective, greener, and hybrid strategies for the removal of toxic contaminants. Immobilization is a biotechnological tool, anchoring the enzymes on support material to enhance the stability and retain the structural conformation of enzymes for catalysis. Recyclability and reusability are the main merits of immobilized enzymes over free enzymes. Studies showed that immobilized enzyme laccase can be used up to 7 cycles with 66% efficiency, peroxidase can be recycled to 2 cycles with 50% efficiency, and also cellulase to 3 cycles with 91% efficiency. In this review, basic concepts of immobilization, different immobilization techniques, and carriers used for immobilization are summarized. In addition to that, the potential of immobilized enzymes as the bioremediation agents for the effective degradation of pollutants from the contaminated zone and the impact of different operating parameters are summarized in-depth. Further, this review provides future trends and challenges that have to be solved shortly for enhancing the potential of immobilized systems for large-scale industrial wastewater treatment.

Recent advances on discovery of enzyme inhibitors from natural products using bioactivity screening

The essence of enzymes is to keep the homeostasis and balance of human by catalyzing metabolic responses and modulating cell. Suppression of enzyme slows the progress of some diseases, making it a therapeutic target. Therefore, it is important to develop enzyme inhibitors by proper bioactivity screening strategies for the future treatment of some major diseases. In this review, we summarized the recent (2015-2020) applications of several screening strategies (electrophoretically mediated microanalysis, enzyme immobilization, affinity chromatography, and affinity ultrafiltration) in finding enzyme inhibitors from certain species of bioactive natural compounds of plant origin (flavonoids, alkaloids, phenolic acids, saponins, anthraquinones, coumarins). At the same time, the advantages and disadvantages of each strategy were also discussed, and the future possible development direction in enzyme inhibitor screening has prospected. To sum up, it is expected to help readers select suitable screening strategies for enzyme inhibitors and provide useful information for the study of the biological of specific kinds of natural products. This article is protected by copyright. All rights reserved.

Bioconjugation Strategy for Ceramic Membranes Decorated with Candida Antarctica Lipase B-Impact of Immobilization Process on Material Features

A strategy for the bioconjugation of the enzyme Candida antarctica lipase B onto titania ceramic membranes with varied pore sizes (15, 50, 150, and 300 kDa) was successfully performed. The relationship between the membrane morphology, i.e.,the pore size of the ceramic support, and bioconjugation performance was considered. Owing to the dimension of the enzyme (~33 kDa), the morphology of the ceramics allowed (50, 150, and 300 kDa) or did not allow (15 kDa) the entrance of the enzyme molecules into the porous structure. Such a strategy made it possible to better understand the changes in the material (morphology) and physicochemical features (wettability, adhesiveness, and surface charge) of the samples, which were systematically examined. The silane functionalization and enzyme immobilization were accomplished via the covalent route. The samples were characterized after each stage of the modification, which was very informative from the material point of view. As a consequence of the modification, significant changes in the contact angle, roughness, adhesion, and zeta potential were observed. For instance, for the 50 kDa membrane, the contact angle increased from 29.1 ± 1.5° for the pristine sample to 72.3 ± 1.5° after silane attachment; subsequently, it was reduced to 57.2 ± 1.5° after the enzyme immobilization. Finally, the contact angle of the bioconjugated membrane used in the enzymatic process rose to 92.9 ± 1.5°. By roughness (S_q) controlling, the following amendments were noticed: for the pristine 50 kDa membrane, S_q = 1.87 ± 0.21 µm; after silanization, S_q = 2.33 ± 0.30 µm; after enzyme immobilization, S_q = 2.74 ± 0.26 µm; and eventually, after the enzymatic process, S_q = 2.37 ± 0.27 µm. The adhesion work of the 50 kDa samples was equal to 136.41 ± 2.20 mN m⁻¹ (pristine membrane), 94.93 ± 2.00 mN m⁻¹ (with silane), 112.24 ± 1.90 mN m⁻¹ (with silane and enzyme), and finally, 69.12 ± 1.40 mN m⁻¹ (after the enzymatic process). The materials and physicochemical features changed substantially, particularly after the application of the membrane in the enzymatic process. Moreover, the impact of ceramic material morphology on the zeta potential value is here presented for the first time. With an increase in the ceramic support cut-off, the amount of immobilized lipase rose, but the specific productivity was higher for membranes possessing smaller pores, owing to the higher grafting density. For the enzymatic process, two modes of accomplishment were selected, i.e., stirred-tank and cross-flow. The latter method was characterized by a much higher effectiveness, with a resulting productivity equal to 99.7 and 60.3 µmol h⁻¹ for the 300 and 15 kD membranes, respectively.

Magnetic casein aggregates as an innovative support platform for laccase immobilization and bioremoval of crystal violet

In this study, casein@CoFe₂O₄ was fabricated through a green synthesis methodology and applied to immobilize laccase. The constructed casein@CoFe₂O₄ exhibited porous structures with distinct cavities and suitable magnetic properties. The abundance of aromatic functional groups on the surface renneted casein and possible π-type interaction between laccase and para-κ-casein resulted in a successful immobilization. The biocatalyst retained 50% of its initial activity after 24 reusability cycles, indicating stable immobilization of laccase onto the casein microstructures. The stability of laccase after immobilization was improved by 300% in comparison with the free enzyme, especially in basic pH values. The constructed laccase@casein@CoFe₂O₄ was then incorporated to remove crystal violet (CV) as an environmentally harmful synthetic tri-phenylmethane dye. The prepared heterogeneous biocatalyst effectively diminished the antimicrobial activity of CV up to 81.3% in 40 min against some bacterial strains, resulting from the formation of more minor toxic metabolites identified by liquid chromatography coupled with mass spectroscopy after degradation procedure. The proposed green and feasible method for the preparation of magnetic casein aggregates has not been previously reported. The incorporation of casein, which acted as a molecular chaperon, resulted in a significant improvement in the enzymatic stability and exhibited appropriate reusability for the constructed biocatalytic system.

A Review on the Design and Performance of Enzyme-Aided Catalysis of Carbon Dioxide in Membrane, Electrochemical Cell and Photocatalytic Reactors

Multi-enzyme cascade catalysis involved three types of dehydrogenase enzymes, namely, formate dehydrogenase (FDH), formaldehyde dehydrogenase (FaldDH), alcohol dehydrogenase (ADH), and an equimolar electron donor, nicotinamide adenine dinucleotide (NADH), assisting the reaction is an interesting pathway to reduce thermodynamically stable molecules of CO₂ from the atmosphere. The biocatalytic sequence is interesting because it operates under mild reaction conditions (low temperature and pressure) and all the enzymes are highly selective, which allows the reaction to produce three basic chemicals (formic acid, formaldehyde, and methanol) in just one pot. There are various challenges, however, in applying the enzymatic conversion of CO₂, namely, to obtain high productivity, increase reusability of the enzymes and cofactors, and to design a simple, facile, and efficient reactor setup that will sustain the multi-enzymatic cascade catalysis. This review reports on enzyme-aided reactor systems that support the reduction of CO₂ to methanol. Such systems include enzyme membrane reactors, electrochemical cells, and photocatalytic reactor systems. Existing reactor setups are described, product yields and biocatalytic productivities are evaluated, and effective enzyme immobilization methods are discussed.

Utility of Thermal Cross-Linking in Stabilizing Hydrogels with Beta-Tricalcium Phosphate and/or Epigallocatechin Gallate for Use in Bone Regeneration Therapy

β-tricalcium phosphate (β-TCP) granules are commonly used materials in dentistry or orthopedic surgery. However, further improvements are required to raise the operability and bone-forming ability of β-TCP granules in a clinical setting. Recently, we developed epigallocatechin gallate (EGCG)-modified gelatin sponges as a novel biomaterial for bone regeneration. However, there is no study on using the above material for preparing hydrogel incorporating β-TCP granules. Here, we demonstrate that vacuum heating treatment induced thermal cross-linking in gelatin sponges modified with EGCG and incorporating β-TCP granules (vhEc-GS-β) so that the hydrogels prepared from vhEc-GS-β showed high stability, β-TCP granule retention, operability, and cytocompatibility. Additionally, microcomputed tomography morphometry revealed that the hydrogels from vhEc-GS-β had significantly higher bone-forming ability than β-TCP alone. Tartrate-resistant acid phosphatase staining demonstrated that the number of osteoclasts increased at three weeks in defects treated with the hydrogels from vhEc-GS-β compared with that around β-TCP alone. The overall results indicate that thermal cross-linking treatment for the preparation of sponges (precursor of hydrogels) can be a promising process to enhance the bone-forming ability. This insight should provide a basis for the development of novel materials with good operativity and bone-forming ability for bone regenerative medicine.