Enhanced waste activated sludge dewaterability by the ozone-peroxymonosulfate oxidation process: Performance, sludge characteristics, and implication

Optimizing carbon sources regulation in the biochemical treatment systems for coal chemical wastewater: Aromatic compounds biodegradation and microbial response strategies

The complex composition of coal chemical wastewater (CCW), marked by numerous highly toxic aromatic compounds, induces the destabilization of the biochemical treatment system, leading to suboptimal treatment efficacy. In this study, a biochemical treatment system was established to efficiently degrade aromatic compounds by quantitatively regulating the dosage of co-metabolized substrates (specifically, the chemical oxygen demand (COD) Glucose: COD Sodium acetate = 3:1, 1:3, and 1:1). The findings demonstrated that the system achieved optimal performance under the condition that the ratio of COD Glucose to COD Sodium acetate was 3:1. When the co-metabolized substrate was added to the system at an optimal ratio, examination of pollutant removal and cumulative effects revealed that the removal efficiencies for COD and total organic carbon (TOC) reached 94.61 % and 86.40 %, respectively. The removal rates of benzene series, nitrogen heterocyclic compounds, polycyclic aromatic hydrocarbons, and phenols were 100 %, 100 %, 63.58 %, and 94.12 %, respectively. Research on the physiological response of microbial cells showed that, under optimal ratio regulation, co-metabolic substrates led to a substantial rise in microbial extracellular polymeric substances (EPS) secretion, particularly extracellular proteins. When the system reached the end of its operation, the contents of loosely bound EPS (LB-EPS) and tightly bound EPS (TB-EPS) for proteins in the optimal group were 7.12 mg/g-SS and 152.28 mg/g-SS, respectively. Meanwhile, the ratio of α-Helix / (β-Sheet + Random coil) and the proportion of intermolecular interaction forces were also increased in the optimal group. At system completion, the ratio of α-Helix / (β-Sheet + Random coil) reached 0.717 (LB-EPS) and 0.618 (TB-EPS), respectively. Additionally, the proportion of intermolecular interaction forces reached 74.83 % (LB-EPS) and 55.03 % (TB-EPS). An in-depth analysis of the metabolic regulation of microorganisms indicated that the introduction of optimal ratios of co-metabolic substrates contributed to a noteworthy upregulation in the expression of Catechol 2,3-dioxygenase (C23O) and Dehydrogenase (DHA). The expression levels of C23O and DHA were measured at 0.029 U/mg Pro·g MLSS and 75.25 mg TF·(g MLSS·h)-1 (peak value), respectively. Correspondingly, enrichment of aromatic compound-degrading bacteria, including Thauera, Saccharimonadales, and Candidatus_Competibacter, occurred, along with the upregulation of associated functional genes such as Catechol 1,2-dioxygenase, Catechol 2,3-dioxygenase, Protocatechuate 3,4-dioxygenase, and Protocatechuate 4,5-dioxygenase. Considering the intricate system of multiple coexisting aromatic compounds in real CCW, this study not only obtained an optimal ratio for carbon source addition but also enhanced the efficient utilization of carbon sources and improved the capability of the system to effectively degrade aromatic compounds. Additionally, this paper established a theoretical foundation for metabolic regulation and harmless treatment within the biochemical treatment of intricate systems, exemplified by real CCW.

Targeted regulation of digestate dewaterability by the ozone/persulfate oxidation process

Dewatering is the first step in the subsequent treatment and disposal of food waste digestate (FWD). However, FWD is difficult to dewatering. In this study, persulfate was synergistic oxidized by ozone to improve digestate dewaterability. The optimal conditions was at pH = 3, O3＝40 mg/g TS and PDS＝0.1 g/g TS, under which the reductions in the normalized capillary suction time (NCST) and bound moisture (BM) of the FWD were 89.97% and 65.79%, respectively. Hydrophilic functional groups (oxygen- and nitrogen-containing groups) and hydrophilic protein molecular structures were decomposed by the reactive species of sulfate radical (SO4·-) and hydroxyl radicals (·OH) generated in the ozone-persulfate oxidation process, disrupting the binding between EPS and water molecules. The contributions of SO4·- and ·OH to digestate dewaterability were 42.51% and 28.55%. In addition, the introduction of H+ reduced electrostatic repulsion and contributed to the condensation of digestate flocs. The environmental implication assessment and economic analysis suggested that the O3/PDS oxidation process was cost-effective and has a low environmental implication when applied to the FWD dewaterability improvement process. These results can serve as a reference for the management of FWD and further improvement of FWD treatment and disposal efficiency.

Progress of improving waste activated sludge dewaterability: Influence factors, conditioning technologies and implications and perspectives

Large amounts of waste activated sludge (WAS) as a by-product generated from the biological treatment in wastewater treatment plants (WWTPs) is of high moisture content (MC), organic pollutants, heavy metals and pathogenic bacteria, it may cause serious environmental ecological risk without appropriate disposal. More than one half of the total operation cost is accounted for sludge disposal in a WWTP. Dewatering is an essential and important step during the sludge treatment and disposal process for it could efficiently reduce its volume, and be beneficial to the subsequent treatment and disposal of sludge. However, sludge should be conditioned before mechanical dewatering because of its high hydrophilicity. In this work, it presented a comprehensive review on sludge dewatering including summarizing the dewaterability measurement indexes, affecting factors, conditioning technologies, the improvement mechanisms. Finally, based on the eventual disposal and low carbon emission target, the implications and perspectives development of sludge conditioning were discussed. Based on the above discussion, there is no unified theoretical insight of the improvement mechanism of sludge dewaterability. In addition, the relationship between the microstructure of organic matters in sludge floc and the dewaterability should be deepened. Especially, how to choose the optimal conditioning technology for sludge dewatering lies in the physical and chemical properties of sludge, however, the carbon emission of the conditioning and dewatering process also needs to be considered. Accordingly, green, low-cost and organic conditioning agents are the direction of future research, and the establishment of automatic operating system and real-time evaluation index system is the key challenge.

Research progress in improving sludge dewaterability: sludge characteristics, chemical conditioning and influencing factors

Sludge from wastewater treatment processes with high water content and large volume has become an inevitable issue in environmental management. Due to the challenging dewatering properties of sludge, current mechanical dewatering methods are no longer sufficient to meet the escalating water content standards of sludge. This paper summarizes the characteristics of various sludge and raises reasons for the their dewaterability differences. Affected by extracellular polymeric substances, biological sludge is hydrophilic and negatively charged, which limits the dewatering degree. The rheological properties, flocs, ionic composition, and solid phase concentration of the sludge also influence the dewatering to some extent. For these factors, the chemical conditioning measures with simple operation and excellent effect improve its dewaterability, which mainly include flocculation/coagulation, acid/alkali treatment, advanced oxidation, surfactant treatment and combined treatment. There is a growing necessity to explore the development of new chemical conditioning agents, even though traditional agents continue to remain widely used. However, the development of these new agents should prioritize finding a balance between various factors such as efficiency, effectiveness, ease of operation, environmental safety, and cost-effectiveness. Electrochemical dewatering enhances solid-liquid separation, and its coupling with chemical conditioning is also an excellent means to further reduce water content. In addition, the improvement of press filter is an effective way, which is influenced by pressure, processing time, sludge cake thickness and pore structure, filter media etc. In general, it is essential to develop new conditioning agents and enhance mechanical filtration press technology based on a thorough understanding of various sludge properties. Concurrently, an in-depth study of the principles of mechanical pressure filtration will contribute to establishing a theoretical foundation for effective deep sludge dewatering and propel further advancements in this field.

Generation and engineering applications of sulfate radicals in environmental remediation

Sulfate radical (SO4•-)-based advanced oxidation processes (AOPs) have become promising alternatives in environmental remediation due to the higher redox potential (2.6-3.1 V) and longer half-life period (30-40 μs) of sulfate radicals compared with many other radicals such as hydroxyl radicals (•OH). The generation and mechanisms of SO4•- and the applications of SO4•--AOPs have been examined extensively, while those using sulfite as activation precursor and their comparisons among various activation precursors have rarely reviewed comprehensively. In this article, the latest progresses in SO4•--AOPs were comprehensively reviewed and commented on. First of all, the generation of SO4•- was summarized via the two activation methods using various oxidant precursors, and the generation mechanisms were also presented, which provides a reference for guiding researchers to better select two precursors. Secondly, the reaction mechanisms of SO4•- were reviewed for organic pollutant degradation, and the reactivity was systematically compared between SO4•- and •OH. Thirdly, methods for SO4•- detection were reviewed which include quantitative and qualitative ones, over which current controversies were discussed. Fourthly, the applications of SO4•--AOPs in various environmental remediation were summarized, and the advantages, challenges, and prospects were also commented. At last, future research needs for SO4•--AOPs were also proposed consequently. This review could lead to better understanding and applications of SO4•--AOPs in environmental remediations.

Conversion and impact of dissolved organic matters in a heterogeneous catalytic peroxymonosulfate system for pollutant degradation

Dissolved organic matters (DOM) are widely present in different water sources, causing significant effects on water treatment processes. Herein, the molecular transformation behavior of DOM during peroxymonosulfate (PMS) activation by biochar for organic degradation in a secondary effluent were comprehensively analyzed. Evolution of DOM was identified and inhibition mechanisms to organic degradation were elucidated. DOM underwent oxidative decarbonization (e.g., -C₂H₂O, -C₂H₆, -CH₂ and -CO₂), dehydrogenation (-2H) and dehydration reactions by ^·OH and SO₄^·-. N and S containing compounds witnessed deheteroatomisation (e.g., -NH, -NO₂+H, -SO₂, -SO₃, -SH₂), hydration (+H₂O) and N/S oxidation reactions. Among DOM, CHO-, CHON-, CHOS-, CHOP- and CHONP-containing molecules showed moderate inhibition while condensed aromatic compounds and aminosugars exhibited strong and moderate inhibition effects on contaminant degradation. The fundamental information could provide references for the rational regulation of ROS composition and DOM conversion process in a PMS system. This in turn offered theoretical guidance to minimize the interference of DOM conversion intermediates on PMS activation and degradation of target pollutants.

Enhanced degradation of extracellular polymeric substances by yeast in activated sludge to achieve sludge reduction

Candida Tropicalis was used to improve the dewaterability of activated sludge (AS) and reduce its biomass by degrading EPS in AS. The protein, polysaccharide, and hydrophilic amino acids in EPS decreased by 54.50, 29.20, and 61.01%, respectively. Meanwhile, molecular weight distribution indicated that yeast degraded macromolecular organics into small molecular ones. The direct addition of yeast to AS was more conducive to EPS degradation. With the addition of 0.75 g/L of wet yeast cells and 24 h of aeration enhanced the dewaterability of AS. The CST and MLSS decreased by 24.44 and 10.51%, respectively. After 30 days of operation of lab-scale continuous SBRs, the CST and MLSS of AS were reduced by 6.37 ± 2.01 and 3.57 ± 0.52%, respectively. FTIR spectroscopy results showed that some hydrophilic functional groups were reduced. This study provides a new approach for the in-situ reduction of AS in wastewater treatment plant.

Effect of KMnO4/pH adjustment of extracellular polymeric substances under waste activated sludge on sludge dewatering

In this study, we examine the dewaterability of sludge after treatment by KMnO4 at various pH levels, with the goal of understanding the dewaterability of strong oxidizers to waste activated sludge. Good dewatering performance is observed, with capillary suction times (CST) reduced from 263.4 to 30.1 s, and specific resistance to filtration (SRF) falling by 19.6%. Proteins and polysaccharides in tightly bound extracellular polymeric substances (EPS) were also significantly reduced. Based on spectroscopic and electrochemical analysis, we propose mechanisms for the improved dewatering in terms of changes to the sludge's physicochemical properties and EPS. Under strong oxidation, the structure surrounding the bound water is oxidized and bound water is released, so the dewaterability of the sludge is improved.Weiliang Pan and Jiaoni Li contributed equally to this work.

An all-organic conditioning method to achieve deep dewatering of waste activated sludge and the underlying mechanism

Among the common treatment/disposal routes of excessive activated sludge from municipal wastewater treatment plant, dewatering process functions as an essential pre-/post-treatment for volume minimization and transportation facilitation. Since inorganic coagulants have long been criticized for their high dosage and solid residue in sludge cake, there is an urgent need for investigations regarding the potential of applying organic chemicals as the conditioner. In this study, combined use of poly dimethyldiallylammonium chloride (PDMD) and tannic acid (TA) were investigated as an all-organic co-conditioning method for sewage sludge pre-treatment. Results showed that this all-organic conditioning strategy can effectively improve the dewaterability of sewage sludge. The capillary suction time reduced from 128.8 s to 23.1 s, and the filtration resistance reduced from 1.24 × 10¹² cm/g to 7.38 × 10¹⁰ cm/g. The moisture content of dewatered sludge cake decreased to as low as 55.83%, showing the highest dewatering efficiency reported so far. In addition, the combination of PDMD and TA maximized the treating efficiency with very limited consumption of conditioners (added up to 4% of total solid). Based on the physic-chemical and rheological property investigation, it was proposed that the intermediate molecular weight polymer-based flocculation process and the TA agent-based protein precipitation process, could remarkably strengthen the compactness and structure robustness of sludge. In all, this PDMD-TA-based conditioning method suggested practical significance in consideration of its cost-effectiveness and disposal convenience of sludge cake.

Application of O3/PMS Advanced Oxidation Technology in the Treatment of Organic Pollutants in Highly Concentrated Organic Wastewater: A Review

The ozone/peroxymonosulfate (O3/PMS) system has attracted widespread attention from researchers owing to its ability to produce hydroxyl radicals (•OH) and sulfate radicals (SO4•−) simultaneously. The existing research has shown that the O3/PMS system significantly degrades refinery trace organic compounds (TrOCs) in highly concentrated organic wastewater. However, there is still a lack of systematic understanding of the O3/PMS system, which has created a significant loophole in its application in the treatment of highly concentrated organic wastewater. Hence, this paper reviewed the specific degradation effect, toxicity change, reaction mechanism, various influencing factors and the cause of oxidation byproducts (OBPs) of various TrOCs when the O3/PMS system is applied to the degradation of highly concentrated organic wastewater. In addition, the effects of different reaction conditions on the O3/PMS system were comprehensively evaluated. Furthermore, given the limited understanding of the O3/PMS system in the degradation of TrOCs and the formation of OBPs, an outlook on potential future research was presented. Finally, this paper comprehensively evaluated the degradation of TrOCs in highly concentrated organic wastewater by the O3/PMS system, filling the gaps in scale research, operation cost, sustainability and overall feasibility.

Enhanced technology for sewage sludge advanced dewatering from an engineering practice perspective: A review

The increasing production of sludge poses significant environmental risks. Sludge disposal and transport are costly because of the high water content (WC). Reducing the WC of sludge is the most efficient strategy to decrease treatment costs. However, the sludge contains a large amount of hydrophilic organic matter, causing poor dewaterability. Therefore, research on preconditioning and mechanical dewatering has great significance for advanced sludge dewatering. In this study, the features of sludge, the advantages and disadvantages of preconditioning methods, and the action mechanisms (including physical, chemical, and biological preconditioning) are thoroughly described. In addition, the dewatering principle and engineering applications of mechanical dewatering techniques are introduced in this manuscript, especially the application of vacuum preloading as an in-situ dewatering technology in sludge. Finally, cost analysis of different conditioning and mechanical dewatering methods is conducted to explore their application feasibility. This manuscript provides new insights for engineering applications of preconditioning methods and mechanical dewatering technology.

Metal-free catalysis for organic micropollutant degradation in waste activated sludge via poly(3-hydroxybutyrate) biopolymers using Cupriavidus sp. L7L coupled with peroxymonosulfate

This study employed a novel and environment-friendly biopolymer/oxidant catalytic system, viz., poly(3-hydroxybutyrate)/peroxymonosulfate (PHB/PMS), for pretreating wastewater sludge for the first time. Under optimal conditions, i.e., 3.1 × 10^-4 M of PMS and 3.3 g/L of PHB at pH = 6.0, the PAHs in the sludge matrix was decreased by 79 % in 12 h. Increase in salinity (75 % synthetic seawater) achieved 83 % of PAHs degradation. Functional groups (CO) of the biopolymer matrix were active centers for biopolymer-mediated electron transfer that produced reactive oxygen species (SO₄^-, HO, and ¹O₂) for adsorption and catalytic oxidation of PAHs in the sludge. Functional metagenomic analysis revealed the main genus, Conexibacter (phylum, Actinobacteria) exhibited PAH-degrading function with high efficiency in the biodegradation of PAHs from sludge pretreated with PHB/PMS. Coupling chemical oxidation and biostimulation using bacterial polymer-based biomaterials is effective and beneficial for pretreating wastewater sludge toward circular bioeconomy.

Removal of 4-nonylphenol in activated sludge by peroxymonosulfate activated with sorghum distillery residue-derived biochar

The presence of 4-nonylphenol (4-NP), an endocrine disrupting chemical, waste activated sludge (WAS) or biosolids at elevated content requires effective method for 4-NP reduction in total sludge management. Herein, sorghum distillery residue-based biochar-activated peroxymonosulfate (SDRBC/PMS) system was studied as pretreatment of WAS. Results indicated 91% of 4-NP removal at pH 6.0 in the presence of 3.1 × 10^-6 M and 0.8 g L^-1 PMS and SDRBC500, individually. The synergetic effects of singlet oxygen (¹O₂) and the abundant functional sites (C = O/C-O content) of SDRBC significantly improved 4-NP degradation. The decreased fluorescent dissolved organic matter (DOM) in the sludge also enhanced the pretreatment efficiency. Moreover, the enrichment of the Nitrospira functional bacteria in the microbial community yielded the highest 4-NP degradation in the SDRBC/PMS-pretreated sludge. The SDRBC/PMS system functions mainly via nonradical-mediated oxidation pathway in pretreating WAS in particular and potentially by combined advanced oxidation and biodegradation processes for wastewater treatment in general.