Microplastic pollution in sediments of tropical shallow lakes

Seasonal distribution of microplastics and associated ecological risks in a semi-arid freshwater ecosystem in India

Microplastics are persistent contaminants across all environmental matrices. However, there is a paucity of studies conducted in semi-arid aquatic environments. The present study investigated the seasonal variations in the distribution and characteristics of microplastics in water samples of Man Sagar Lake in northwestern India. The findings revealed that the average abundance of microplastics in samples was notably lower during the pre-monsoon season (42.93 ± 29.72 particles/L) compared to the post-monsoon season (70.54 ± 36.53 particles/L). A significant difference in microplastic abundance across different sampling locations was observed between the two seasons (F = 7.82, p < 0.0001). The majority of microplastics present in the samples during both seasons measured less than 500 μm in size, with fragments and fibers being the predominant shapes, and transparent being the most common-colored microplastic. The most abundant polymers detected were polyethylene, polypropylene, and polystyrene. Microplastic contamination factor (MCf) and Pollution Load Index (PLI >1) indicated a moderate to high level of microplastic contamination across all the sampling locations in both seasons. Furthermore, the potential ecological risk index (PERI) indicated that nearly 70 % of the lake area falls under the category of very high ecological risk in both seasons. Additionally, Spearman's correlation and PCA were employed to assess the interactions of microplastics with water quality parameters and potential source identification, respectively. The study's findings could help in developing region-specific remediation and prevention strategies by identifying high-risk areas and potential sources contributing to microplastic contamination.

Microplastic contamination in sediments: Analytical techniques and case-based evaluations

Microplastics (MPs) pollution in sediments has gained critical attention due to its pervasive presence and potential ecological risks. This review synthesizes the latest advancements in analytical techniques, providing a comprehensive overview of separation and identification methods tailored to complex sedimentary matrices. Density-based approaches, such as ZnCl2 or NaI solutions, and enzymatic digestions are increasingly refined to isolate MPs of varying sizes, yet discrepancies in mesh sizes, reagent concentrations, and digestion protocols continue to complicate cross-study comparisons. Meanwhile, cutting-edge spectroscopic tools-μFTIR, Raman imaging, thermal analyses-have greatly enhanced polymer identification down to the tens-of-micrometers scale. Case studies spanning urban estuaries to remote deep-sea basins underscore the pervasive nature of MPs worldwide, with fibers and fragments frequently dominating sediment samples. Factors such as polymer density, hydrodynamics, and biofouling contribute to the diverse distribution patterns, revealing that even ostensibly pristine environments are not exempt from contamination. Although the precise ecological and toxicological consequences of long-term sediment-bound MPs remain partly unclear, growing evidence points to intricate interactions with co-occurring contaminants and potential trophic transfer. To address these knowledge gaps, this review emphasizes the urgent need for methodological standardization and collaborative initiatives, particularly for emerging challenges like nanoplastic detection. By integrating robust sampling approaches, advanced analytical tools, and interdisciplinary research, scientists and policymakers can more accurately map and mitigate the impacts of sediment-associated MPs on aquatic ecosystems.

Environmental Health and Safety Implications of the Interplay Between Microplastics and the Residing Biofilm

The increasing prevalence of microplastics in the environment has raised concerns about their potential environmental and health implications. Biofilms readily colonize microplastics upon their entry into the environment, altering their surface characteristics. While most studies have explored how biofilms influence the adsorption and transportation of other contaminants by microplastics, the reciprocal interplay between microplastics and biofilms and the resulting ecological risks remain understudied. This review comprehensively reviews the impact of microplastic properties on biofilm formation and composition, including the microbial community structure. We then explore the dynamic interactions between microplastics and biofilms, examining how biofilms alter the physicochemical properties, migration, and deposition of microplastics. Furthermore, we emphasize the potential of biofilm-colonized microplastics to influence the environmental fate of other pollutants. Lastly, we discuss how biofilm-microplastic interactions may modify the bioavailability, biotoxicity, and potential health implications of microplastics.

First report of microplastics in water and sediments of the alkaline Bagno dell'Acqua Lake (Pantelleria Island, southern Italy)

Microplastics are ubiquitous in aquatic ecosystems and lakes are considered important sinks for this contaminant. In this study, we assessed for the first time the occurrence and spatial distribution of microplastics in surficial waters and sediment of a small alkaline lake located in the National Park of Pantelleria Island (Central Mediterranean Sea). The island is small, scarcely populated, not industrialized and ∼70 km far from the southern European and northern African shores. Water samples were collected in triplicates in different sectors of the lake using a 10 L metal bucket, while sediment sampling was carried out at seven stations along the lake shoreline, plus one station at 3.6 m depth. Results show a homogeneous distribution of microplastic in surface waters, dominated by fibers (∼90%), with a mean concentration of 0.13 ± 0.04 MP/L, which is lower than most of the lakes worldwide. Conversely, microplastics in sediment had a higher proportion of fragments and films (50%) and their concentrations range from 0 to 540 MP/kg. The highest abundance was recorded in the western sector, where most of touristic activities concentrate, and at the 3.6 m depth station, thus suggesting that the deeper parts of the lake may retain the majority of microplastics entering the system. This study shows that even in small lakes far from major anthropic pressures, sediment may contain microplastics in striking abundances, pointing out the need to assess rural and remote lakes, at present much understudied compared to lakes in highly populated regions.

Global patterns of lake microplastic pollution: Insights from regional human development levels

Microplastics have emerged as a pervasive pollutant across various environmental media. Nevertheless, our understanding of their occurrence, sources, and drivers in global lakes still needs to be completed due to limited data. This study compiled data from 117 studies (2016-May 2024) on microplastic contamination in lake surface water and sediment, encompassing surface water samples in 351 lakes and lake sediment samples in 200 lakes across 43 countries. Using meta-analysis and statistical methods, the study reveals significant regional variability in microplastic pollution, with concentrations ranging from 0.09 to 130,000 items/m3 in surface water and from 5.41 to 18,100 items/kg in sediment. Most microplastics were under 1 mm in particle size, accounting for approximately 79 % of lake surface water and 76 % of sediment. Transparent and blue microplastics were the most common, constituting 34 % and 21 % of lake surface water and 28 % and 18 % of sediment, respectively. Fibers were the dominant shape, representing 47 % of lake surface water and 48 % of sediment. The primary identified polymer types were polyethylene (PE), polypropylene (PP), and polyethylene terephthalate (PET). Countries like India, Pakistan, and China had higher contamination levels. Positive correlations were found between microplastic abundance in surface water and factors like human footprint index (r = 0.29, p < 0.01), precipitation (r = 0.21, p < 0.05), and net surface solar radiation (r = 0.43, p < 0.001). In contrast, negative correlations were observed with the human development index (r = -0.61, p < 0.01) and wind speed (r = -0.42, p < 0.001). In sediment, microplastics abundance correlated positively with the human footprint index (r = 0.45, p < 0.001). This study underscores the variability in microplastic pollution in global lakes and the role of human activities and environmental factors, offering a valuable reference for future research.

Impacts of microplastic concentrations and sizes on the rheology properties of lake sediments

The information concerning the effects of microplastics (MPs) on lake sediment environment, particularly structural properties, is still scant. This study aimed to investigate the effect of MPs characteristics (including concentration and size) on the sediment rheological properties, which affected sediment resuspension. After 60-day experiments, it was found that (0.5-2 %) MP in sediments decreased sediment viscosity, yield stress, and flow point shear stress by 14.7-38.4 %, 3.9-24.1 % and 13.5-36.5 %. Besides, sediment (with 50 μm MP addition) yield stress and flow point shear stress also dropped by 1.1-14.1 % and 9.6-12.9 % compared to 100 and 200 μm MP addition. The instability in sediment structure could be attributed to MP-induced EPS production and cation exchange capacity (CEC) changes. Accordingly, the decreases in rheological properties induced by different sizes and concentrations MPs might facilitate the sediments resuspension with wind and wave disturbances. The study shed light on previously overlooked environmental issues caused by MPs characteristics from a new perspective, thereby enhancing our understanding about the environmental behavior of MPs in lake sediment ecosystems.

Microplastics monitoring in freshwater systems: A review of global efforts, knowledge gaps, and research priorities

The escalating production of synthetic plastics and inadequate waste management have led to pervasive microplastic (MP) contamination in aquatic ecosystems. MPs, typically defined as particles smaller than 5 mm, have become an emerging pollutant in freshwater environments. While significant concern about MPs has risen since 2014, research has predominantly concentrated on marine settings, there is an urgent need for a more in-depth critical review to systematically summarize the current global efforts, knowledge gaps, and research priorities for MP monitoring in freshwater systems. This review evaluates the current understanding of MP monitoring in freshwater environments by examining the distribution, characteristics, and sources of MPs, alongside the progression of analytical methods with quantitative evidence. Our findings suggest that MPs are widely distributed in global freshwater systems, with higher abundances found in areas with intense human economic activities, such as the United States, Europe, and China. MP abundance distributions vary across different water bodies (e.g., rivers, lakes, estuaries, and wetlands), with sampling methods and size range selections significantly influencing reported MP abundances. Despite great global efforts, there is still a lack of harmonized analyzing framework and understanding of MP pollution in specific regions and facilities. Future research should prioritize the development of standardized analysis protocols and open-source MP datasets to facilitate data comparison. Additionally, exploring the potential of state-of-the-art artificial intelligence for rapid, accurate, and large-scale modeling and characterization of MPs is crucial to inform effective strategies for managing MP pollution in freshwater ecosystems.

Microplastics alter the microbiota-mediated phosphorus profiles at sediment-water interface: Distinct microbial effects between sediment and plastisphere

Microplastics (MPs) are ubiquitous in freshwater sediments, raising concern about their potential impacts on ecosystem services. However, the specific impacts of microbiota mediated by MPs in sediment and plastisphere compartments on P availability remain elusive. This investigation conducted a series of microcosm experiments utilizing eutrophic lake sediment amended with fuel-based polyethylene terephthalate (PET), bio-based polylactic acid (PLA) MPs, and a natural cobblestone substrate to unravel their effects. The findings highlighted that MPs induced alterations in bacterial communities in both sediment and plastisphere, consequently modifying P availabilities at the sediment-water interface (SWI). In comparison to non-biodegradable PET, biodegradable PLA MPs presented higher proportions of specific bacteria and functional genes associated with P profiles, such as Firmicutes, Ignavibacteriota, and P mineralizing genes in the sediment and plastisphere. This, in turn, elevated the levels of soluble reactive P in the porewater by 54.19 % (0-1 cm), 55.81 % (1-3 cm), and 18.24 % (3-5 cm), respectively. Additionally, PLA obviously altered P immobilization capacity and bioavailability, increasing the organic P fraction. Whereas, inert cobblestone exhibited negligible influence on P biogeochemical processes during the incubation. Moreover, the biofilm communities and those in the surrounding sediment specifically contributed to the changes in P profiles at the SWI. The functional genes associated with P profiles in the sediment mainly concentrate on P mineralization and P uptake/transport. In the plastisphere, P activation genes are obviously affected under MP exposure. This study fills the knowledge gap concerning the repercussions of MPs on ecosystem services.

Impacts of microplastic contamination on the rheology properties of sediments in a eutrophic shallow lake

Microplastic (MP) contamination is a growing global concern, with lake sediments serving as a significant sink for MP due to both anthropogenic and natural activities. Given the increasing evidence of MP accumulation in sediments, it was crucial to assess their influence on sediment erosion resistance, which directly affected sediment resuspension. To fill this gap, this study focused on the effect of MP on the sediments rheological properties. After 60-day experiments, it was found that MP addition into sediments reduced sediment viscosity, yield stress, and flow point shear stress. Meanwhile, MPs also significantly altered sediment properties and extracellular polymer composition. MP addition reduced extracellular polymeric substances production and cation exchange capacity, which then worked together and led to a weak sediment structure. Seemingly, MPs changed fluid sediment characteristics and caused stronger fluidity under less shear force. Consequently, the accumulation of MP might facilitate the resuspension of sediments under smaller wind and wave disturbances. This study provided novel insights into the direct impact of MPs on sediment physical properties using rheology, thereby enhancing our understanding of the environmental behavior of MPs in lake ecosystems.

From pollution to solutions: Insights into the sources, transport and management of plastic debris in pristine and urban rivers

River systems are important recipients of environmental plastic pollution and have become key pathways for the transfer of mismanaged waste from the land to the ocean. Understanding the sources and fate of plastic debris, including plastic litter (>5 mm) and microplastics (MPs) (<5 mm), entering different riverine systems is essential to mitigate the ongoing environmental plastic pollution crisis. We comprehensively investigated the plastic pollution in the catchments of two rivers in the Yangtze River basin: an urban river, the Suzhou section of the Beijing-Hangzhou Grand Canal (SZ); and a pristine rural river, the Jingmen section of the Hanjiang River (JM). The abundance of plastic pollutants in SZ was significantly higher than in JM: 0.430 ± 0.450 items/m3 and 0.003 ± 0.003 items/m3 of plastic litter in the water; 23.47 ± 25.53 n/m3 and 2.78 ± 1.55 n/m3 MPs in the water; and 218.82 ± 77.40 items/kg and 5.30 ± 1.99 items/kg of MPs in the sediment, respectively. Plastic litter and MPs were closely correlated in abundance and polymer composition. Overall, the polymer type, shape and color of MPs were dominant by polypropylene (42.5%), fragment (60.4%) and transparent (40.0%), respectively. Source tracing analysis revealed that packaging, shipping, and wastewater were the primary sources of plastic pollutants. The mantel analysis indicated that socio-economic and geospatial factors play crucial roles in driving the hotspot formation of plastic pollution in river networks. The composition of the MP communities differed significantly between the sediments and the overlying water. The urban riverbed sediments had a more pronounced pollutant 'sink' effect compared with the pristine rivers. These findings suggested that the modification of natural streams during urbanization may influence the transport and fate of plastic pollutants in them. Our results offer pivotal insights into effective preventive measures.

Global occurrence characteristics, drivers, and environmental risk assessment of microplastics in lakes: A meta-analysis

Microplastic (MP) pollution in lakes has received much attention as an increasing amount of plastic waste enters aquatic ecosystems. However, there is still a lack of comprehensive understanding of the global distribution patterns, environmental hazards, factors driving their presence, and the relationships between sources and sinks of MPs. In this study, we conducted a meta-analysis of drivers of lake MP pollution based on 42 articles on MP pollution from three different aspects: geographical distribution, driving factors and environmental risks. The results revealed differences in the MP pollution levels across the different sampling sites in the global lakes. Moreover, there is significant heterogeneity in the abundance of MPs among various lakes, whose distribution pattern is affected by geographical location, sampling method and extraction method. The size of the MPs differed significantly between water and sediment, and the proportion of small (<1 mm) MPs in sediment was significantly greater than that in water (72% > 46%). Environmental risk assessment reveals that the risk level of MP pollution in most lakes worldwide is low, and the environmental risk of pollution in lake water is higher than that in sediment. Based on the risk assessment and geographical location of the lake, the risk of MP pollution is related not only to human activities and economic development but also to local waste management practices, which directly impact the accumulation of MPs. Therefore, we suggest that the production of biodegradable low-risk polymer plastics instead of high-risk materials, and plastic solid waste recycling management should be strengthened to effectively mitigate the presence of MPs in the environment.

Spatio-temporal distribution of microplastic pollution in surface sediments along the coastal areas of Istanbul, Turkey

Microplastics (MPs) have become prevalent in various environmental compartments, including air, water, and soil, attracting attention as significant pollutant parameters. This study investigated the prevalence of MP pollution in surface sediments along Istanbul's Marmara Sea, encompassing the megacity and the Bosphorus. A comprehensive sampling approach was employed, covering 43 stations across four seasons and depths ranging from 5 to 70 m. The objective was to assess the impact of terrestrial, social, and industrial activities on MPs. The average concentrations varied per season, with fall, winter, spring, and summer values recorded as 2000 ± 4100, 1600 ± 3900, 4300 ± 12,000, and 9500 ± 20,300 particles/kg-DW. The study identified river stations in the Golden Horn and sea discharge locations as hotspots for high concentrations. Notably, the dominant shape shifted from fibers in fall, winter, and spring to fragments during summer, coinciding with mucilage occurrences. The study identified 11 different polymers, with polyethylene (44 %) and polypropylene (31 %) being the most common.

The spatial distribution and abundance of microplastics in lake waters and ice during ice-free and ice-covered periods

Understanding the spatial distribution and characteristics of microplastics (MPs) in lake waters is essential to assessing and addressing lacustrine MP pollution. This study investigated how lake ice affects the abundance, spatial distribution, and characteristics (size, shape) of MPs in Lake Ulansuhai by analyzing samples collected at ten sites uniformly distributed throughout the lake during ice-free and ice-covered periods. The abundance of MPs ranged between 204 ± 28 and 1224 ± 185 n·L^-1 in lake waters during the ice-free period, and from 34 ± 8 to 216 ± 21 n·L^-1 and 269 ± 84 to 915 ± 117 n·L^-1 in water and ice during the ice-covered period, respectively. During the ice-covered period, MPs were 2.74-8.14 times higher in the ice than in water beneath the ice. Ice formation decreased MP abundance in lake waters, in part, by incorporating a relatively high percentage of MPs into the ice mass during freezing and by inhibiting atmospheric MPs from reaching the lake waters. The abundance of MPs in the water during the ice-free period was 4.50-11.30 times greater than during the ice-covered period. Seasonal variations in MP shape also occurred; the proportion of fibrous MPs in water decreased during the ice-covered period. Variations in MP abundance were partly due to differences in sedimentation rates; the settling of fibrous MPs is slower, making it easier for them to be captured during the formation of surface ice. Spatially, MPs were uniformly distributed during the ice-free period, but exhibited a spatially distinct pattern during ice-covered periods, when MPs in lake waters were higher in the northeast and lower in the southwest portions of the lake. During the ice-free period, small MPs (0.05-0.5 mm) were more likely to move with currents in the lake, whereas water velocities were reduced by ice formation, allowing small MPs to accumulate near the lake inlet.