Microplastic contamination of soil: Are input pathways by compost overridden by littering?

Organic matter and microplastics nexus: A comprehensive understanding of the synergistic impact on soil health

The interactional nexus of microplastics (MPs) and organic matter (OM) can subtly disrupt the delicate balance of soil ecosystems, influencing nutrient dynamics, biodiversity, and overall soil health. To explore this complex interplay between MPs and OM concerning several perspectives, a comprehensive keyword search was conducted across key scientific databases, and the retrieved data was curated according to the PRISMA guidelines to reflect the objectives. Several studies have highlighted that organic-based inputs, such as manures, composts, and sewage sludge, widely used for soil amendment, are potential sources of MPs to soil contamination. These coinciding sources of MPs and OM raise potential concerns about their impact on overall soil health. MPs and OM have parallel characteristics and play a critical role in the soil organic carbon (SOC) and dissolved organic matter (DOM), critical for biogeochemical transformations and nutrient cycling. In light of this, the present review explores the multifaceted nexus between MPs and OM, explaining their interaction mechanisms and their effects on the biological and physicochemical properties of the soil. Despite significant implications on soil ecosystem, challenges remain in accurately quantifying the effects of MPs due to the complexities introduced by DOM. The intricate interaction between MPs and DOM can obscure analytical results, complicating efforts to separate and identify these pollutants effectively. Given these challenges, this review underscores the urgent need for innovative methods to characterize and quantify MPs in complex environmental matrices. Finally, we discuss emerging research directions aimed at advancing the detection and management of MPs in soil ecosystems.

Microplastics in agricultural soils: sources, impacts on soil organisms, plants, and humans

Agricultural land has long been regarded as a resource for food production, but over time, the effects of climate change have reduced the ability of soil to produce food efficiently. Nowadays, farmers have moved from traditional to modern techniques of farming. Across the globe, plastic mulching has become widely used on farmlands. According to a few studies, the breakdown of plastic mulches releases microplastics (MPs) into the soil. Despite studies reporting the presence of MPs in soils, there are limited studies on the sources and impacts on soil organisms, plant growth, fruits, and human health. This study evaluated research articles collected from the Web of Science to assess the origin of MP in soil and crops and its effects on soil organisms, plants, and humans. It was observed that MPs come from different sources such as waste water, organic fertilizer, irrigation water, sewage, and sludge. Plastic mulching, which can spread across agricultural fields at varying depths, is the dominant source. Furthermore, it was observed that MPs alter crop quality, reduce the leaf count of wheat, and decrease the root length of crops such as maize, water spinach, black gram, and garden cress. MP can decrease the abundance of soil microarthropods and nematodes, damage the intestinal walls of earthworms, and reduce the feeding and excretion of snails. MP causes liver damage, inflammation, respiratory irritation, and immunological issues. Ultimately, these contaminants (MPs) can transfer and have been detected in fruits and vegetables, which pose adverse effects on human health.

Microplastic in Australian processed organics: Abundance, characteristics and potential transport to soil ecosystem

The extensive use and application of recycled organics, including biosolids and compost, has been considered as an effective waste management approach to reduce waste to landfills. However, concerns have been raised about the presence of microplastics (MPs) in these recycled organics and their subsequent transfer to soils. Although the presence of MPs in biosolids has been widely documented, our knowledge about the occurrence and characteristics of MPs in processed organic waste such as compost is still limited. The present study aimed to investigate the abundance, characteristics and potential sources of MPs (>25 μm) in processed organic waste samples collected across eleven sites with different processing systems in Australia. This includes compost, digestate from anaerobic digestion and rapidly dehydrated food waste. MPs, mainly polyethylene, polypropylene and polyester, were found across all samples with concentrations ranging from 1500 to 16,000 MP/kg dry weight. The majority of these MPs fell within the smaller size range of 25-500 μm. Using the concentration and characteristics (size range, morphology, density) of detected MPs, the mass abundance of MPs was estimated to be between 7 and 760 mg/kg dry weight. We also estimated that between 5.2 × 1010 to 6.2 × 1012 MP/year could be transferred to the land via application of processed organic waste in Australia. The findings of this study also showed compostable bags as a potential source of MPs in some samples. This study provides the first evidence of MPs in processed organic waste in Australia and emphasises the need to more comprehensively understand the fate of MPs during the composting processes, their contribution to soil MP contamination, and their impacts on soil biota.

Plastic input and dynamics in industrial composting

Green and biowaste, processed within large facilities into compost, is a key fertilizer for agricultural and horticultural soils. However, due to improper waste disposal of plastic, its residues often remain or even lead to the formation ofmicroplastics (1 µm - 5 mm, MiPs) in the final compost product. To better understand the processes, we first quantified 'macroplastics' (> 20 mm, MaPs) input via biowaste collection into an industrial composting plant, and, then determined MiP concentrations at five stages during the composting process (before and after shredding and screening processes), and in the water used for irrigation. The total concentrations of MaPs in the biowaste collected from four different German districts ranged from 0.36 to 1.95 kg ton-1 biowaste, with polyethylene (PE) and polypropylene (PP) representing the most abundant types. The "non-foil" and "foil" plastics occurred in similar amounts (0.51 ± 0.1 kg ton-1 biowaste), with an average load of 0.08 ± 0.01 items kg-1 and 0.05 ± 0.01 items kg-1, respectively. Only 0.3 ± 0.1 kg MaP t-1 biowaste was biodegradable plastic. Compost treatment by shredding tripled the total number of MaPs and MiPs to 33 items kg-1, indicating an enrichment of particles during the process and potential fragmentation. Noticeably, a substantial amount of small MiPs (up to 22,714 ± 2,975 particles L-1) were found in the rainwater used for compost moistening, being thus an additional, generally overlooked plastic source for compost. Our results highlight that reducing plastic input via biowaste is key for minimizing MiP contamination of compost.

Assessment of microplastic ecological risk and environmental carrying capacity of agricultural soils based on integrated characterization: A case study

Microplastic pollution in agricultural soils poses a significant threat to soil quality and environmental sustainability. This study investigated the composition, abundance, distribution, ecological risk, and environmental carrying capacity of microplastic pollution in the Tarim River Basin (TRB), China. The risk quotient combined with soil environmental carrying capacity (SECC) approaches was proposed to evaluate ecological risks and soil sustainability. Microplastic abundances ranged from 0 to 4000 items/kg (average = 570 items/kg), with polyethylene (PE) polytetrafluoroethylene (PTFE) and polypropylene (PP) as dominant polymers. In addition, various factors affecting the occurrence of microplastics were analyzed. Agricultural mulching and drip irrigation were associated with higher microplastic levels. The risk assessment showed that among the different shapes, size ranges and categories of microplastics, fragmented (film), large-sized microplastics and PE had the highest risk, respectively. While current levels are within SECC limits, early warning model predicts PE and PP may reach threshold limits in recent years. This study provides crucial insights for managing microplastic pollution in agricultural regions, emphasizing the need for targeted mitigation strategies to maintain soil ecology sustainability.

Microplastic analysis in soils: A comparative assessment

Microplastic (MiP) contamination poses environmental risks, but harmonizing data from different quantification methods and sample matrices remains challenging. We compared analytical protocols for MiP quantification in soil, consisting of Digital, Fluorescence, Fourier-transform infrared (FTIR), and Raman Microscopy as well as quantitative Pyrolysis-Gas Chromatography-Mass Spectroscopy (Py-GC-MS) and 1-proton nuclear magnetic resonance (1H NMR) spectroscopy as detection techniques. Each technique was coupled with a specific extraction procedure and evaluated for three soils with different textures and organic carbon contents, amended with eight types of large MiPs (0.5-1 mm) - high- and low-density polyethylene (HDPE and LDPE), polypropylene (PP), polystyrene (PS), polyamide (PA), polyethylene terephthalate (PET), polyvinyl chloride (PVC), and a biodegradable mulch film product composed of polybutylene adipate-co-terephthalate/ polylactic acid (PBAT/ PLA). In addition, we included two types of small MiPs (20-250 µm) composed of either LDPE or PBAT/ PLA in the tests. The results showed that protocols for Digital, Fluorescence, and ATR-FTIR microscopy recovered 74-98 % of the large MiPs, with fluorescence yielding the highest recoveries. Raman spectroscopy was most sensitive to soil organic matter residues, requiring more sophisticated sample pretreatment. Fluorescence staining with subsequent Fluorescence microscopy detection effectively recovered most small-sized LDPE-MiP but missed 56-93 % of small PBAT/ PLA particles. For the latter, reliable quantification was achieved only using Soxhlet extraction combined with 1H NMR spectroscopic quantification. Pyrolysis-GC-MS showed intermediate results, displaying low sensitivity to plastic type and lower recoveries as soil clay content increased. We conclude that different methods have different sensitivities for different MiP materials in different soils, i.e. comparisons of MiP loads and threshold settings for MiP loads across methodologies require careful consideration. Yet, our data indicate that adding stained large MiP as an internal standard could enhance extraction control, while Soxhlet-extraction with subsequent 1H NMR analysis is most powerful for controlling future thresholds of small MiP from biodegradable materials.

Unveiling the mechanism of micro-and-nano plastic phytotoxicity on terrestrial plants: A comprehensive review of omics approaches

Micro-and-nano plastics (MNPs) are pervasive in terrestrial ecosystems and represent an increasing threat to plant health; however, the mechanisms underlying their phytotoxicity remain inadequately understood. MNPs can infiltrate plants through roots or leaves, causing a range of toxic effects, including inhibiting water and nutrient uptake, reducing seed germination rates, and impeding photosynthesis, resulting in oxidative damage within the plant system. The effects of MNPs are complex and influenced by various factors including size, shape, functional groups, and concentration. Recent advancements in omics technologies such as proteomics, metabolomics, transcriptomics, and microbiomics, coupled with emerging technologies like 4D omics, phenomics, spatial transcriptomics, and single-cell omics, offer unprecedented insight into the physiological, molecular, and cellular responses of terrestrial plants to MNPs exposure. This literature review synthesizes current findings regarding MNPs-induced phytotoxicity, emphasizing alterations in gene expression, protein synthesis, metabolic pathways, and physiological disruptions as revealed through omics analyses. We summarize how MNPs interact with plant cellular structures, disrupt metabolic processes, and induce oxidative stress, ultimately affecting plant growth and productivity. Furthermore, we have identified critical knowledge gaps and proposed future research directions, highlighting the necessity for integrative omics studies to elucidate the complex pathways of MNPs toxicity in terrestrial plants. In conclusion, this review underscores the potential of omics approaches to elucidate the mechanisms of MNPs-phytotoxicity and to develop strategies for mitigating the environmental impact of MNPs on plant health.

Influence of soil characteristics and agricultural practices on microplastic concentrations in sandy soils and their association with heavy metal contamination

Microplastics (MPs) seriously threaten soil quality and crop health, particularly in agricultural systems using plastic mulch and sewage sludge, with their abundance being strongly influenced by soil properties such as texture, structure, and chemical content. Considering this, the present study assessed MP contamination in arid agricultural soils, focusing on their abundance, morphology, composition, and association with heavy metals to evaluate environmental risks. Soil samples were collected from ten plastic-mulched fields and a control site across a 50 sq. km area. MPs were isolated using density separation and hydrogen peroxide digestion, with morphology categorized through microscopy and polymer composition analysed via FTIR. ICP-OES was used for elemental analysis. Statistical methods, including ANOVA, Pearson's correlation, scatter plots, and PCA, were applied to examine the influence of soil quality on MP levels. Results showed significantly higher MP concentrations in mulched fields (1412 ± 529 particles) compared to the control (72 ± 41 particles), with MPs primarily consisting of fibres, films, fragments, and microbeads. Positive correlations were observed between MPs and soil properties such as clay content, moisture, and organic matter content. FTIR analysis identified eight polymer types, while heavy metals, mainly Fe and Ni, were found to accumulate within MPs. MP counts were positively correlated with mulching duration (r2 = 0.46 to 0.94), indicating increased contamination over time. These findings emphasize the role of soil properties on MP retention and potential risks posed to soil health and environmental sustainability, stressing the need for strategies to mitigate MP contamination in agriculture.

Study of the litter in the urban environment as primary and secondary microplastics sources

Microplastic is one of the most important environmental challenges of recent decades. Although the abundance of microplastics in water sources and water bodies such as the marine were investigated in many studies, knowing the sources of microplastics requires more studies. In this study, litter was investigated as one of the challenges of urban management and the sources of primary microplastic and secondary microplastic in the urban environment. For this purpose, Clean Environment Index and Cigarette Butt Pollution Index, were used to interpret the density of litter and estimate the abundance of microplastic resources in Khuzestan province, Iran. The results showed that the density of litter in the studied cities was 0.0001-0.6502 items/m2. The calculated clean environment index and cigarette butt pollution index were 0.211-35.05 and 0.112-12.897, respectively. The density of primary microplastic and secondary microplastic sources in the studied cities was 47,207-62,767 µg/m2 (average = 52782) and 2127-3140 µg/m2 (average = 2570), respectively. The abundance of primary microplastic due to littering in the studied cities was estimated at 150 g/year. Reducing the ratio of littering waste in the urban environment and increasing the efficiency of the urban cleaning service is necessary to manage the most dispersed source of microplastics in the urban environment.

Global soil microplastic assessment in different land-use systems is largely determined by the method of analysis: A meta-analysis

Although microplastics (1 μm - 5 mm, MP) are increasingly recognised as a novel entity of pollutants, we still lack a basic understanding of their prevalence in different terrestrial environments. Here, we aimed at performing comparisons of MP concentrations (items kg-1) in different agro-ecosystems, with specific focus on input pathways and land uses, while accounting for the plethora of method variations available, such as analysed MP sizes, sampling depths, density separation solutions, as well as removal of organic matter. We found that the current global means of MP loads, from 89 studies (553 sites), benchmarks 2900 ± 7600 MP items kg-1 soil, substantially more than the global median of 480 MP items kg-1. Roughly 81 % of the studies were conducted in Asia; hence, continent-wide comparisons are still hampered by low study numbers for most regions. Maximum MP numbers were found for soils under both greenhouses and plastic mulching (5200 ± 8300 items kg-1), followed by arable soils with sludge amendments (3700 ± 8800 items kg-1), surprisingly without evidence of elevated MP loads in horticultural fields relative to other agricultural management practices. Intriguingly, global MP loads significantly increased with decreasing levels of urbanisation, i.e., they were highest in rural areas. Yet, quantitative comparisons among sites are biased by the methodology selected for MP analyses. Apart from inconsistencies in sampling depth and size of screened MP particles, across all sites and treatments, largest MP loads were commonly found when using high-density solutions rather than low-density ones, and when soil organic matter removal was performed after, and not before, the density separation step.

Effects of microplastics on 3,5-dichloroaniline adsorption, degradation, bioaccumulation and phytotoxicity in soil-chive systems

Microplastics (MPs) and pesticides are two pollutants of concern in agricultural soils. 3,5-dichloroaniline (3,5-DCA), a highly toxic metabolite of dicarboximide fungicides, commonly co-exists with MPs and poses a risk to the environment and food safety. Batch adsorption and soil incubation experiments were employed to investigate the effects of polyethylene (PE) and polylactic acid (PLA) MPs on the environmental behavior of 3,5-DCA in soil. Chive (Allium ascalonicum) was used as the experimental plant, a pot experiment was conducted to examine the effects of individual or combined exposure to MPs and 3,5-DCA on plant 3,5-DCA bioaccumulation, growth characteristics, and phytotoxicity. The results showed that PE- and PLA-MPs increased the adsorption capacity of soil to 3,5-DCA and prolonged the degradation half-life of 3,5-DCA by 6.24 and 16.07 d, respectively. Two MPs partially alleviated the negative effects of 3,5-DCA on the root length and fresh weight of chives, while PE-MPs had a positive and dose-dependent impact on the contents of photosynthetic pigment in chive leaves. Co-exposure to 3,5-DCA and MPs increased residues of 3,5-DCA in soil and chive roots but had no significant effect on 3,5-DCA residues in chive stems or leaves. Moreover, 3,5-DCA residues in PLA-MP soil were consistently higher than those in PE-MP soil. Conclusively, MPs altered the 3,5-DCA adsorption and degradation behavior in soil, as well as its bioaccumulation in chives. Co-exposure to MPs and 3,5-DCA had dose-dependent and MP-specific effects on chive plant development and phytotoxicity.

Sources, environmental fate, and impacts of microplastic contamination in agricultural soils: A comprehensive review

The pervasive presence of microplastics has emerged as a pressing global environmental concern, posing threats to food security and human health upon infiltrating agricultural soils. These microplastics primarily originate from agricultural activities, including fertilizer inputs, compost-based soil remediation, irrigation, and atmospheric deposition. Their remarkable durability and resistance to biodegradation contribute to their persistent presence in the environment. Microplastics within agricultural soils have prompted concerns regarding their potential impacts on agricultural practices. Functioning as significant pollutants and carriers of microcontaminants within agricultural ecosystems, microplastics and their accompanying contaminants represent ongoing challenges. Within these soil ecosystems, the fate and transportation of microplastics can detrimentally affect plant growth, microbial communities, and, subsequently, human health via the food chain. Specifically, microplastics interact with soil factors, impacting soil health and functionality. Their high adsorption capacity for hazardous microcontaminants exacerbates soil contamination, leading to increased adverse effects on organisms and human health. Due to their tiny size, microplastic debris is easily ingested by soil organisms and can transfer through the food chain, causing physiological and/or mechanical damage. Additionally, microplastics can affect plant growth and have the potential to accumulate and be transported within plants. Efforts to mitigate these impacts are crucial to safeguarding agricultural sustainability and environmental health. Future research should delve into the long-term impacts of environmental aging processes on microplastic debris within agricultural soil ecosystems from various sources, primarily focusing on food security and human beings.

Global microplastics pollution: a bibliometric analysis and review on research trends and hotspots in agroecosystems

The prevalence of microplastics (MPs) in agricultural ecosystems poses a notable threat to dynamics of soil ecosystems, crop productivity, and global food security. MPs enter agricultural ecosystems from various sources and have considerable impacts on the physiochemical properties soil, soil organisms and microbial communities, and plants. However, the intensity of these impacts can vary with the size, shape, types, and the concentrations of MPs in the soil. Besides, MPs can enter food chain through consummation of crops grown on MPs polluted soils. In this study, we conducted a bibliometric analysis of 1636 publications on the effects of MPs on agricultural ecosystems from 2012 to May 2024. The results revealed a substantial increase in publications over the years, and China, the USA, Germany, and India have emerged as leading countries in this field of research. Social network analysis identified emerging trends and research hotspots. The latest burst keywords were contaminants, biochar, polyethylene microplastics, biodegradable microplastics, antibiotic resistance genes, and quantification. Furthermore, we have summarized the effects of MPs on various components of agricultural ecosystems. By integrating findings from diverse disciplinary perspectives, this study provides a valuable insight into the current knowledge landscape, identifies research gaps, and proposes future research directions to effectively tackle the intricate challenges associated with MPs pollution in agricultural environments.

Visible intruders: Tracing (micro-) plastic in organic fertilizers

Agricultural soils have been identified as potential reservoirs for plastic pollution, with adverse effects on soil properties. Primary sources of plastic input in agricultural landscapes are associated with the application of sewage sludge or compost. Understanding the sources and anticipated plastic content is crucial in mitigating plastic pollution in agricultural fields. This study presents one of the first investigations into the plastic content and other impurities, e.g. glass, of seven organic fertilizers (biowaste compost, digested pig slurry, sewage sludge compost, dry chicken manure, green waste compost, sewage sludge, and a mixed digestate comprising pig slurry, chicken manure, and 74 % renewable raw materials). Potentially visible foreign substances were assessed on the surface of each fertilizer pile. No impurities could be detected in digested pig slurry, chicken manure, and mixed digestate. For the remaining fertilizers, visible potential foreign substances were collected, cleaned, visually described, weighed, photographed, size measured, and chemically characterized using ATR-FTIR. The quantification revealed that plastic particles are the most abundant and are contained in all other fertilizers, in contrast to glass and metal. An increasing trend in plastic particle number per m2: green waste < biowaste < sewage sludge compost < sewage sludge, which is about 4 times greater in sewage sludge than in green waste compost, could be observed. However, sewage sludge compost has the largest plastic mass and surface area per square meter. This illustrates that sewage sludge compost application can be a significant entry pathway for visual plastics into agricultural soils.

A method for the extraction of microplastics from solid biowastes including biosolids, compost, and soil for analysis by µ-FTIR

Few methods exist detailing the extraction of microplastics from organic matrices. A validated method for the successful extraction of microplastics from solid biowastes including biosolids, compost, and soil for spectroscopic analysis by micro-Fourier transform infrared spectroscopy (µ-FTIR) was developed. Solid dry biowastes were first digested with a wet peroxide oxidation (WPO) with iron (II) solution and 30% hydrogen peroxide followed by sequential density separations with ultra-pure water and 1.8 g cm-3 NaI in an optimised sediment-microplastic isolation (SMI) unit. The average recoveries for spiked microplastics were 92, 95 and 98% for bagged compost, biosolids, and soil, respectively. This method ensures a high microplastic recovery by first chemically disintegrating biowaste aggregates without employing destructive methods like milling and allows for successful density separations where the settled fraction is isolated off from the supernatant, allowing thorough rinsing of the equipment and thus a greater transferal of particles into the vacuum filtering device. Minimal processing steps reduce the instance of introducing contamination and particle loss.•Digestion as a first step to disintegrate aggregates to release entrapped microplastics•Density separation with SMI unit with the method adapted for biowastes•Minimal steps to reduce contamination and particle loss.

Considering microplastic characteristics in ecological risk assessment: A case study for China

Microplastics (MPs) pose a significant global concern, requiring a multifaceted approach to their risk assessment procedures, especially concerning their characteristics in the environment. The Horqin Left Middle Banner in Northeast China was chosen for the research region to investigate the abundance, composition, distribution, and ecological impact of MPs in surface agricultural soils. The concentrations of MPs ranged from 300 to 12800 items/kg, with a median concentration of 1550 items/kg (average = 1994 items/kg). The normal-sized MPs (500-5000 µm) had a higher relative abundance than small MPs (<500 µm). MPs were mainly derived from textiles and packaging and were affected by atmospheric transportation. Rayon and PET fibers were the main polymers identified. Furthermore, the potential environmental risks posed by the fundamental characteristics (abundance, chemical composition, and size) of MPs were quantified using multiple risk assessment models. The conditional fragmentation model indicated a propensity for MPs to degrade into smaller particles. Ecological risk assessments using pollution load index, pollution hazard index, and potential ecological risk index models revealed varying levels of risk. This study conducted a comprehensive assessment of the ecological risks of MPs based on their environmental characteristics, emphasizing the importance of considering multiple factors in the risk assessment process. ENVIRONMENT IMPLICATION: This study investigates the occurrence, distribution, and ecological risk of microplastics (MPs) in agricultural soils of the Northeast Plain of China, a major food production area. MPs are persistent organic pollutants that can pose threats to soil health, crop quality, and food security. By analyzing the composition, size, and source of MPs, as well as their fragmentation and stability in soil, this study provides valuable data for assessing the environmental risk of MPs in agricultural regions. The study also suggests strategies for mitigating MPs pollution and protecting soil ecosystems.

Plastics in biogenic matrices intended for reuse in agriculture and the potential contribution to soil accumulation

The spread of biogenic matrices for agricultural purposes can lead to plastic input into soils, raising a question on possible consequences for the environment. Nonetheless, the current knowledge concerning the presence of plastics in biogenic matrices is very poor. Therefore, the objective of the present study was a quali-quantitative characterization of plastics in different matrices reused in agriculture as manures, digestate, compost and sewage sludges. Plastics were quantified and characterized using a Fourier Transform Infrared Spectroscopy coupled with an optical microscope (μFT-IR) in Attenuated Total Reflectance mode. Our study showed the presence of plastics in all the investigated samples, albeit with differences in the content among the matrices. We measured a lower presence in animal matrices (0.06-0.08 plastics/g wet weight w.w.), while 3.14-5.07 plastics/g w.w. were measured in sewage sludges. Fibres were the prevalent shape and plastic debris were mostly in the micrometric size. The most abundant polymers were polyester (PEST), polypropylene (PP) and polyethylene (PE). The worst case was observed in the compost sample, where 986 plastics/g w.w. were detected. The majority of these plastics were compostable and biodegradable, with only 8% consisting of fragments of PEST and PE. Our results highlighted the need to thoroughly evaluate the contribution of reused matrices in agriculture to the plastic accumulation in the soil system.

Microplastics in different municipal solid waste treatment and disposal systems: Do they pose environmental risks?

Microplastic (MP) pollution is a significant worldwide environmental and health challenge. Municipal solid waste (MSW) can be an important source of MPs in the environment if treated and disposed of inappropriately, causing potential ecological risks. MSW treatment and disposal methods have been gradually shifting from landfilling/dumping to more sustainable approaches, such as incineration or composting. However, previous studies on MP characteristics in different MSW treatment and disposal systems have mainly focused either on landfills/dumpsites or composts. The lack of knowledge of multiple MSW treatment and disposal systems makes it difficult to ensure effective MP pollution control during MSW treatment and disposal. Therefore, this study systematically summarizes the occurrence of MPs in different MSW treatment and disposal systems (landfill/dumpsite, compost, and incineration) on the Eurasian scale, and discusses the factors that influence MPs in individual MSW treatment and disposal systems. In addition, the paper assesses the occurrence of MPs in the surrounding environment of MSW treatment and disposal systems and their ecological risks using the species sensitivity distribution approach. The study also highlights recommendations for future research, to more comprehensively describe the occurrence and fate of MPs during MSW treatment and disposal processes, and to develop appropriate pollution control measures to minimize MP pollution.

Aging microplastics and coupling of "microplastic-electric fields" can affect soil water-stable aggregates' stability

As plastic waste continues to accumulate in natural environments, the impact of aged microplastics (MPs) on soil ecosystems is increasingly becoming a matter of global concern. However, the effects of aged MPs on the stability of water-stable soil aggregates have not been clearly elucidated. Therefore, we investigated the influence of two types of aged MPs, namely, polystyrene and polypropylene, on soil aggregate stability. We found that MPs have a notable effect on the fundamental structural units of soil aggregates, including organic matter and microorganisms. Consequently, reducing the structural stability of soil aggregates by disrupting the bonding mechanisms of soil particles affects the erosion resistance of coarse aggregates. Furthermore, we investigated the coupled effects of "soil electric field-MPs" on aggregate stability. The results showed that the critical potential for aggregate explosive fragmentation corresponds to an electric field intensity at an electrolyte concentration of 10-2 mol·L-1. In this study, we have clarified the primary factors through which MPs affect the stability of water-stable soil aggregates, providing new insights for a more accurate assessment of the impact of MPs on soil aggregates.

Source-specific probabilistic risk assessment of microplastics in soils applying quality criteria and data alignment methods

The risk characterization of microplastics (MP) in soil is challenging due to the non-alignment of existing exposure and effect data. Therefore, we applied data alignment methods to assess the risks of MP in soils subject to different sources of MP pollution. Our findings reveal variations in MP characteristics among sources, emphasizing the need for source-specific alignments. To assess the reliability of the data, we applied Quality Assurance/Quality Control (QA/QC) screening tools. Risk assessment was carried out probabilistically, considering uncertainties in data alignments and effect thresholds. The Hazardous Concentrations for 5% (HC5) of the species were significantly higher compared to earlier studies and ranged between 4.0 × 107 and 2.3 × 108 particles (1-5000 µm)/kg of dry soil for different MP sources and ecologically relevant metrics. The highest risk was calculated for soils with MP entering via diffuse and unspecified local sources, i.e., "background pollution". However, the source with the highest proportion of high-risk values was sewage, followed by background pollution and mulching. Notably, locations exceeding the risk threshold obtained low scores in the QA/QC assessment. No risks were observed for soils with compost. To improve future risk assessments, we advise to primarily test environmentally relevant MP mixtures and adhere to strict quality criteria.

Is the application of organic fertilizers becoming an undeniable source of microplastics and resistance genes in agricultural systems?

The application of organic fertilizers is becoming an undeniable source of microplastics and antibiotic resistance genes (ARGs) in agricultural soils. The complex microbial activity further transfers resistance genes and their host bacteria to agricultural products and throughout the entire food chain. Therefore, the current main focus is on reducing the abundance of microplastics and ARGs in organic fertilizers at the source, as well as managing microplastics and ARGs in soil. The control of microplastic abundance in organic fertilizers is currently only achieved through pre-composting selection and other methods. However, there are still many shortcomings in the research on the distribution characteristics, propagation and diffusion mechanisms, and control technologies of ARGs, and some key scientific issues still need to be urgently addressed. The high-temperature composting of organic waste can effectively reduce the abundance of ARGs in organic fertilizers to a certain extent. However, it is also important to consider the spread of ARGs in residual antibiotic-resistant bacteria (ARB). This article systematically explores the pathways and interactions of microplastics and resistance genes entering agricultural soils through the application of organic fertilizers. The removal of microplastics and ARGs from organic fertilizers was discussed in detail. Based on the limitations of existing research, further investigation in this area is expected to provide valuable insights for the development and practical implementation of technologies aimed at reducing soil microplastics and resistance genes.

Detection and specific chemical identification of submillimeter plastic fragments in complex matrices such as compost

Research on the plastic contamination of organic fertilizer (compost) has largely concentrated on particles and fragments > 1 mm. Small, submillimeter microplastic particles may be more hazardous to the environment. However, research on their presence in composts has been impeded by the difficulty to univocally identify small plastic particles in such complex matrices. Here a method is proposed for the analysis of particles between 0.01 and 1.0 mm according to number, size, and polymer type in compost. As a first demonstration of its potential, the method is used to determine large and small microplastic in composts from eight municipal compost producing plants: three simple biowaste composters, four plants processing greenery and cuttings and one two-stage biowaste digester-composter. While polyethylene, PE, tends to dominate among fragments > 1 mm, the microplastic fraction contained more polypropylene, PP. Whereas the contamination with PE/PP microplastic was similar over the investigated composts, only composts prepared from biowaste contained microplastic with a signature of biodegradable plastic, namely poly(butylene adipate co-terephthalate), PBAT. Moreover, in these composts PBAT microplastic tended to form the largest fraction. When the bulk of residual PBAT in the composts was analyzed by chloroform extraction, an inverse correlation between the number of particles > 0.01 mm and the total extracted amount was seen, arguing for breakdown into smaller particles, but not necessarily a mass reduction. PBAT oligomers and monomers as possible substrates for subsequent biodegradation were not found. Remaining microplastic will enter the environment with the composts, where its subsequent degradability depends on the local conditions and is to date largely uninvestigated.

Organic amendment in climate change mitigation: Challenges in an era of micro- and nanoplastics

As a global strategy for mitigating climate change, organic amendments play critical roles in restoring stocks in carbon (C) depleted soils, preserving existing stocks to prevent further soil organic carbon (SOC) loss, and enhancing C sequestration. However, recent emerging evidence of a significant proportion of micro- and nanoplastics (M/NPs) occurrence in most organic substrates (e.g., compost manure, farmyard manure, and sewage sludge) compromises its role in climate change mitigation. Given the predicted surge of soil M/NPs proliferation in the coming years, we argued whether organic amendment remains a reliable climate change mitigation strategy. Toxicity effects of M/NPs influx within the soil matrix disrupt plants and their associated key microbial taxa responsible for crucial biogeochemical processes and restructuring of SOC, leading to increasing emissions of potent greenhouse gases (GHGs, e.g., CO2, CH4, and N2O) that feedback to aggravate the rapidly changing climate. Here, we summarize evidence based on literature that the discovery of M/NPs in organic substrates compromises its role in the climate change mitigation strategy. We briefly discuss the overview of synthetic fertilizers and their impact on SOC and atmospheric emissions. We discuss the role of organic amends in climate change mitigation and the emergence of M/NPs in it. We discuss M/NPs-induced damages to SOC and subsequent emissions of GHGs. We briefly highlight management approaches to clean organic substrates of M/NPs to improve their use in agrosystems and provide recommendations for future research studies. We found that organic amendment plays pivotal role in modulating the biotic and abiotic drivers responsible for climate mitigation. However, M/NPs in organic amendments weaken the regulatory mechanisms of organic amendments in plant-soil systems. We conclude that organic amendments of soils are critical for restoring SOC and mitigating the rapidly changing climate; yet, the discovery of M/NPs in organic substrates put their usage in a dilemma.

Status, characteristics, and ecological risks of microplastics in farmland surface soils cultivated with different crops across mainland China

Microplastics (MPs) in agricultural soils could affect the safety of food crops. However, most relevant studies have paid scant attention to the crop fields and focused more on MPs in farmlands with or without film mulching in different regions. To detect MPs, we investigated farmland soils with >30 typical crop species from 109 cities in 31 administrative districts across mainland China. The relative contributions of different MP sources in different farmlands were estimated in detail based on a questionnaire survey, and we also assessed the ecological risks of MPs. Our results indicated the order of MP abundances in farmlands with different crop types, namely fruit fields > vegetable fields > mixed crop fields > food crop fields > cash crop fields. For the detailed sub-types, the highest MP abundance was detected in grape fields, which was significantly higher than that in solanaceous & cucurbitaceous vegetable fields (ranked second, p < 0.05), whereas the MP abundance was lowest in cotton and maize fields. The total contributions of three potential sources, namely livestock and poultry manure, irrigation water, and atmospheric deposition to MPs, varied depending on the crop types in the farmlands. Owing to exposure to MPs, the potential ecological risks to agroecosystems across mainland China were not negligible, particularly in fruit fields. The results of the current study could provide basic data and background information for future ecotoxicological studies and relevant regulatory strategies.

Emergence of microplastics in the aquatic ecosystem and their potential effects on health risks: The insights into Vietnam

The increase of microplastic contamination in Vietnam is a growing concern due to various domestic, agricultural, and industrial activities. The use of plastic mulch and sludge application in agricultural farmland, textile production, daily consumer items, cleaning agents, and health/personal care products contribute significantly to the increasing microplastic pollution in the aquatic ecosystem. The concentration of microplastics reported in surface water ranged from 0.35 to 519,000 items m-3, with fibers and fragments being the most prevalent shapes. Notably, the high concentration of microplastics was observed in lakes, canals, and megacities such as Ha Noi and Ho Chi Minh City, which poses potential health risks to the local community via drinking-water supply and food chains. As an emerging pollutant, MPs are the transport vectors for contaminants in environmental matrices that act as a carrier of hazardous pollutants, release toxic compounds, and evenly aggregate/accumulate in biota. Recent studies have reported the presence of microplastics in various marine organisms, including fish and shellfish, highlighting the risk of ingestion of these particles by humans and wildlife. Thus, it is imperative to monitor microplastic contamination in the ecosystem to provide helpful information for the government and local communities. Efforts should be taken to reduce microplastic pollution at the source to minimize potential effects on ecological and health safety. This review paper emphasizes the urgent need for further research on microplastic pollution in Vietnam and highlights potential solutions to mitigate this emerging environmental threat. KEYWORKS: single-use plastics; microplastics; ecosystems; plastic waste; health risk; ecological and health safety; pollution mitigation.

Organic composts as A vehicle for the entry of microplastics into the environment: A comprehensive review

Plastic pollution is a widespread issue that poses a threat to agroecosystems. Recent data on microplastic (MP) pollution from compost and its application to soil have highlighted the potential impact of micropollutants that may be transferred from compost. Thus, we aim with this review to elucidate the distribution-occurrence, characterization, fate/transport, and potential risk of MPs from organic compost to gain comprehensive knowledge and mitigate the adverse impacts of compost application. The concentration of MPs in compost was up to thousands of items/kg. Among micropollutants, fibers, fragments, and films are the most common, with small MPs having a higher potential to absorb other pollutants and cause harm to organisms. Various synthetic polymers, including polyethylene (PE), polypropylene (PP), polyethylene terephthalate (PET), polystyrene (PS), polyvinyl chloride (PVC), polyester (PES), and acrylic polymers (AP), have been widely used of plastic items. MPs are emerging pollutants that can have diverse effects on soil ecosystems, as they can transfer potential pollutants from MPs to compost and then to the soil. Following the microbial degradation scheme, the transfer chain from plastics to compost to soil can be broken down into main stages, i.e., colonization - (bio)fragmentation - assimilation - and mineralization. Microorganisms and adding biochar play an essential role during composting, which can be an effective solution to enhance MP degradation. Findings have shown that stimulating free radical generation could promote the biodegradation efficacy of MPs and possibly remove their occurrence in compost, thereby reducing their contribution to ecosystem pollution. Furthermore, future recommendations were discussed to reduce ecosystem risks and health challenges.

After the sun: a nanoscale comparison of the surface chemical composition of UV and soil weathered plastics

Once emitted into the environment, macro- (MaP), micro- (MP) and nanoplastics (NP) are exposed to environmental weathering. Yet, the effects of biogeochemical weathering factors occurring in the soil environment are unknown. As the transport, fate, and toxicity of MP and NP depend directly on their surface properties, it is crucial to characterize their transformation in soils to better predict their impact and interactions in this environment. Here, we used scanning transmission x-ray micro spectroscopy to characterize depth profiles of the surface alteration of environmental plastic debris retrieved from soil samples. Controlled weathering experiments in soil and with UV radiation were also performed to investigate the individual effect of these weathering factors on polymer surface alteration. The results revealed a weathered surface on a depth varying between 1 µm and 100 nm in PS, PET and PP environmental plastic fragments naturally weathered in soil. Moreover, the initial step of surface fragmentation was observed on a PS fragment, providing an insight on the factors and processes leading to the release of MP and NP in soils. The comparison of environmental, soil incubated (for 1 year) and UV weathered samples showed that the treatments led to different surface chemical modifications. While the environmental samples showed evidence of alteration involving oxidation processes, the UV weathered samples did not reveal oxidation signs at the surface but only decrease in peak intensities (indicating decrease of the number of chemical C bonds). After a one-year incubation of samples in soil no clear aging effects were observed, indicating that the aging of polymers can be slow in soils.

Supplementary Information

The online version contains supplementary material available at 10.1186/s43591-023-00066-2.

Minimal Impacts of Microplastics on Soil Physical Properties under Environmentally Relevant Concentrations

Agricultural soils are a major reservoir of microplastics, and concerns have arisen about the impacts of microplastics on soil properties and functioning. Here, we measured the physical properties of a silt loam in response to the incorporation of polyester fibers and polypropylene granules over a wide range of concentrations. We further elucidated the underlying mechanisms by determining the role of microplastic shape and the baseline effects from the amendment of soil particles. The incorporation of microplastics into soil tended to increase contact angle and saturated hydraulic conductivity and decrease bulk density and water holding capacity, but not affect aggregate stability. Polyester fibers affected soil physical properties more profoundly than polypropylene granules, due to the vastly different shape of fibers from that of soil particles. However, changes in soil properties were gradual, and significant changes did not occur until a high concentration of microplastics was reached (i.e., 0.5% w/w for polyester fibers and 2% w/w for polypropylene granules). Currently, microplastic concentrations in soils not heavily polluted with plastics are far below these concentrations, and results from this study suggest that microplastics at environmentally relevant concentrations have no significant effects on soil physical properties.