Production of phycobiliproteins, bioplastics and lipids by the cyanobacteria Synechocystis sp. treating secondary effluent in a biorefinery approach

Impact of indigenous vs. cultivated microalgae strains on biomass accumulation, microbial community composition, and nutrient removal in algae-based dairy wastewater treatment

This study investigated the role of indigenous and cultivated microalgae in nutrient removal and biomass production in dairy wastewater, especially in microbial function change. Five indigenous and three cultured microalgal strains were grown in sterile and non-sterile dairy wastewater, and nutrient removal and biomass profiles were analysed. Results showed higher phosphorus removal (90.1 % vs. 81.8 %, p < 0.001) and biomass production (2.3 vs. 2.0 g/L, p < 0.001) in sterile wastewater, while nitrogen removal was higher in non-sterile wastewater (83.1 % vs. 77.5 %, p < 0.05). Indigenous strains grew more consistently in high-concentration wastewater, though not significantly different from cultured strains. Phycosphere bacteria communities were more closely associated with total nitrogen, total phosphorus, and pigment content, while free-living bacteria primarily dependent on chlorophyll a and extracellular polymeric substances (EPS). The nitrogen transforming function was enhanced in phycosphere. These findings provide insights for optimizing microalgal-based wastewater treatment, advancing sustainable dairy wastewater management.

Natural pigments and biogas recovery from cyanobacteria grown in treated wastewater. Fate of organic microcontaminants

Cyanobacterial wastewater-based biorefineries are a sustainable alternative to obtain high-value products with reduced costs. This study aimed to obtain phycobiliproteins and carotenoids, along with biogas from a wastewater-borne cyanobacterium grown in secondary effluent from an urban wastewater treatment plant, namely treated wastewater. For the first time, the presence of contaminants of emerging concern in concentrated pigment extracts was assessed. Tertiary wastewater treatment was conducted in a 3 L photobioreactor inoculated with Synechococcus sp., and operated in semi-continuous regime with a hydraulic retention time of 6 days. The carotenoid content was stable (reaching up to 4 mg g DW-1) regardless of the wastewater composition, while the phycobiliprotein content (up to 214 mg g DW-1) varied according to nitrogen availability. In concentrated pigment extracts, only 3 (out of 20) organic microcontaminants were detected. The biochemical methane potential of pigment-extracted biomass (222 NL CH4 kg VS-1) was still 72 % of raw biomass. In conclusion, a cyanobacteria culture rich in Synechococcus sp. appears as a promising source of bio-based products in a circular economy approach.

Cyanobacteria microbiomes for bioplastic production: Critical review of key factors and challenges in scaling from laboratory to industry set-ups

Cyanobacteria are photoautotrophic microorganisms capable of accumulating polyhydroxybutyrate (PHB). A novel approach for PHB production involves the exploration of cyanobacterial microbiomes, potentially reducing costs through non-sterile cultivation with non-pure substrates. Although still in its early stages, this approach shows promise for high yields and sustained synthesis. However, managing microbiome population dynamics in non-sterile environments requires effective monitoring and control. This review covers PHB production by cyanobacteria microbiomes, from sample procurement to laboratory-scale production. It highlights recent insights into optimizing cultivation parameters for enhanced biopolymer yield. Strategies to overcome challenges in PHB production are evaluated, emphasizing integrated molecular biology techniques with quantitative and qualitative PHB analysis. Finally, key challenges in scaling up production to industrial-scale scenarios are discussed, along with potential solutions to support the development of sustainable industrial processes. Cyanobacteria microbiomes show promise PHB production but challenges like managing non-sterile conditions and scaling up require optimized strategies and integrated approaches.

Carbohydrate and lipid yield in Microcystis aeruginosa for biofuel production under different light qualities

BACKGROUND

Biofuels produced from algae have enormous advantages in replacing fossil fuels, and Microcystis aeruginosa has a great potential for biofuel production, due to growing fast to form large amounts of biomass. Light is essential for algal growth, and the optimum light quality can promote the biomass and lipid accumulation for increasing feedstock for biofuel production.

RESULTS

We investigated the biomass accumulation, photosynthetic ability, carbohydrate, and lipid yield as well as related gene expression in M. aeruginosa under red, blue, purple, and white light to promote biofuel production using this alga under the optimal light quality. Compared with white light, purple light promoted the cell growth during the 5 days, while blue light showed inhibitory effect. Red light had no effect on the cell growth, but improved the biomass content to the highest level. Red light improved the photosynthetic ability by raising chlorophyll level, and up-regulating expression of the genes in chlorophyll biosynthesis, photosynthetic electron transfer, and CO2 fixation. Among these light qualities, red light showed the maximum effect on soluble, insoluble, and total carbohydrate accumulation by up-regulating the genes in polysaccharide and starch formation, and down-regulating the genes in glycolysis and tricarboxylic acid cycle. Red light also exhibited the maximum effect on lipid accumulation, which might be caused by up-regulating five genes in fatty acid biosynthesis.

CONCLUSION

Red light can promote M. aeruginosa accumulating carbohydrates and lipids by regulating related gene expression, which should be the optimal light quality for improving feedstock yield for biofuel production.

Exploring simultaneous production of poly(3-hydroxybutyrate) and exopolysaccharides in cyanobacteria-rich microbiomes

The aim of this study was to explore the viability of the dual production of poly(3-hydroxybutyrate) (PHB) and exopolysaccharides (EPS) by seven microbiomes rich in cyanobacteria. Our initial experiments involved to screen for EPS-producing candidates and examine the impact of salinity and acetate on EPS synthesis. Salinity's known influence on EPS production and acetate's role in enhancing PHB production guided our parameter selection. Surprisingly, neither the introduction of an external carbon source (acetate) nor exposure to an abiotic stressor (salt) significantly altered EPS synthesis rates, which ranged from 25 to 150 mg·L-1, or its composition, with glucose being the dominant sugar component. Scaling up to a 3 L photobioreactor, we achieved simultaneous biopolymer production, reaching up to 205 mg·L-1 EPS and 87 mg·L-1 PHB. Additionally, the presence of uronic acid in the EPS facilitated biomass flocculation, streamlining the separation process, and potentially reducing associated time and costs.

Bioplastic production by harnessing cyanobacteria-rich microbiomes for long-term synthesis

Departing from the conventional axenic and heterotrophic cultures, our research ventures into unexplored territory by investigating the potential of photosynthetic microbiomes for polyhydroxybutyrate (PHB) synthesis, a biodegradable polyester that presents a sustainable alternative to conventional plastics. Our investigation focused on a cyanobacteria-enriched microbiome, dominated by Synechocystis sp. and Synechococcus sp., cultivated in a 3 L photobioreactor under non-sterile conditions, achieving significant PHB production-up to 28 % dry cell weight (dcw) over a span of 108 days through alternating cycles of biomass growth and PHB accumulation. Nile Blue staining and Transmission Electron Microscope visualization allowed to successfully confirm the presence of PHB granules within cyanobacteria cells. Furthermore, the overexpression of PHA synthase during the accumulation phase directly correlated with the increased PHB production. Also, gene expression changes revealed glycogen as the primary storage compound, but under prolonged macronutrient stress, there was a shift of the carbon flux towards favoring PHB synthesis. Finally, analysis through Raman, Fourier- transform infrared spectroscopy and proton Nuclear Magnetic Resonance further validated the extracted polymer as PHB. Overall, it was demonstrated for the first time the feasibility of using phototrophic microbiomes to continuous production of PHB in a non-sterile system. This study also offers valuable insights into the metabolic pathways involved.

A review on microbes mediated resource recovery and bioplastic (polyhydroxyalkanoates) production from wastewater

BACKGROUND

Plastic is widely utilized in packaging, frameworks, and as coverings material. Its overconsumption and slow degradation, pose threats to ecosystems due to its toxic effects. While polyhydroxyalkanoates (PHA) offer a sustainable alternative to petroleum-based plastics, their production costs present significant obstacles to global adoption. On the other side, a multitude of household and industrial activities generate substantial volumes of wastewater containing both organic and inorganic contaminants. This not only poses a threat to ecosystems but also presents opportunities to get benefits from the circular economy. Production of bioplastics may be improved by using the nutrients and minerals in wastewater as a feedstock for microbial fermentation. Strategies like feast-famine culture, mixed-consortia culture, and integrated processes have been developed for PHA production from highly polluted wastewater with high organic loads. Various process parameters like organic loading rate, organic content (volatile fatty acids), dissolved oxygen, operating pH, and temperature also have critical roles in PHA accumulation in microbial biomass. Research advances are also going on in downstream and recovery of PHA utilizing a combination of physical and chemical (halogenated solvents, surfactants, green solvents) methods. This review highlights recent developments in upcycling wastewater resources into PHA, encompassing various production strategies, downstream processing methodologies, and techno-economic analyses.

SHORT CONCLUSION

Organic carbon and nitrogen present in wastewater offer a promising, cost-effective source for producing bioplastic. Previous attempts have focused on enhancing productivity through optimizing culture systems and growth conditions. However, despite technological progress, significant challenges persist, such as low productivity, intricate downstream processing, scalability issues, and the properties of resulting PHA.

Optimizing Phycocyanin Extraction from Cyanobacterial Biomass: A Comparative Study of Freeze-Thaw Cycling with Various Solvents

Cyanobacterial phycocyanin pigment is widely utilized for its properties in various industries, including food, cosmetics, and pharmaceuticals. Despite its potential, challenges exist, such as extraction methods impacting yield, stability, and purity. This study investigates the impact of the number of freeze-thaw (FT) cycles on the extraction of phycocyanin from the wet biomass of four cyanobacteria species (Arthrospira platensis, Chlorogloeopsis fritschii, Phormidium sp., and Synechocystis sp.), along with the impact of five extraction solutions (Tris-HCl buffer, phosphate buffer, CaCl2, deionized water, and tap water) at various pH values. Synechocystis sp. exhibited the highest phycocyanin content among the studied species. For A. platensis, Tris-HCl buffer yielded maximum phycocyanin concentration from the first FT cycle, while phosphate buffer provided satisfactory results from the second cycle. Similarly, Tris-HCl buffer showed promising results for C. fritschii (68.5% of the maximum from the first cycle), with the highest concentration (~12% w/w) achieved during the seventh cycle, using phosphate buffer. Phormidium sp. yielded the maximum pigment concentration from the first cycle using tap water. Among species-specific optimal extraction solutions, Tris-HCl buffer demonstrated sufficient extraction efficacy for all species, from the first cycle. This study represents an initial step toward establishing a universal extraction method for phycocyanin from diverse cyanobacteria species.

Digital imaging-in-flow (FlowCAM) and probabilistic machine learning to assess the sonolytic disinfection of cyanobacteria in sewage wastewater

Assessing the cyanobacteria disinfection in sewage and its compliance with international-standards requires determining the concentration and viability, which can be achieve using Imaging Flow Cytometry device called FlowCAM. The objective is to thoroughly investigate the sonolytic morphological changes and disinfection-performance towards toxic cyanobacteria existing in sewage using the FlowCAM. After optimizing the process conditions, over 80% decline in cyanobacterial cell counts was observed, accompanied by an additional 10-15% of cells exhibiting injuries, as confirmed through morphological investigation. Moreover, for the first time, the experimentally collected data was utilized to build deep-learning probabilistic-neural-networks (PNN) and natural-gradient-boosting (NGBoost) models for predicting disinfection efficiency and ABD area as target outputs. The findings suggest that the NGBoost model exhibited superior prediction performance for both targets, with high test coefficient of determination (R2 > 0.87) and lower test errors (RMSE < 7.10, MAE < 4.14). The confidence interval examination in NGBoost prediction performance showed a minute variation from the experimentally calculated values, suggesting a high accuracy in model prediction. Finally, SHAP analysis suggests the sonolytic time alone contributes around 50% to the cyanobacteria disinfection. Overall, the findings demonstrate the effectiveness of the FlowCAM device and the potential of machine-learning modeling in predicting disinfection outcomes.

Polyhydroxyalkanoates production in biorefineries: A review on current status, challenges and opportunities

The need for a sustainable and circular bioeconomy model is imperative due to petroleum non-renewability, scarcity and environmental impacts. Biorefineries systems explore biomass to its maximum, being an important pillar for the development of circular bioeconomy. Polyhydroxyalkanoates (PHAs) can take advantage of biorefineries, as they can be produced using renewable feedstocks, and are potential substitutes for petrochemical plastics. The present work aims to evaluate the current status of the industrial development of PHAs production in biorefineries and PHAs contributions to the bioeconomy, along with future development points. Advancements are noticed when PHA production is coupled in wastewater treatment systems, when residues are used as substrate, and also when analytical methodologies are applied to evaluate the production process, such as the Life Cycle and Techno-Economic Analysis. For the commercial success of PHAs, it is established the need for dedicated investment and policies, in addition to proper collaboration of different society actors.

Effect of external acetate added in aquaculture wastewater on mixotrophic cultivation of microalgae, nutrient removal, and membrane contamination in a membrane photobioreactor

The mixotrophic cultivation of microalgae in wastewater has attracted extensive attention due to its many advantages. In this study, acetate, which can be prepared by hydrolysis of aquaculture waste, was used as exogenous organic matter to promote the growth of Chlorella pyrenoidosa cultured in aquaculture wastewater. Microalgae cultivation was carried out in a membrane photobioreactor (MPBR) with continuous inflow and outflow mode. The results showed that exogenous acetate greatly promoted the mixotrophic growth of C. pyrenoidosa. When the dosage of acetate reached 1.0 g L-1, the relative growth rate of microalgae in the logarithmic stage reached 0.31 d-1, which was 4.4 times that of the control. As a result, exogenous acetate also promoted the removal of nutrients from aquaculture wastewater. During the stable operation stage of the MPBR with acetate added in the influent, an average of 87.41%-93.93% nitrogen and 76.34%-88.55% phosphorus was removed from the aquaculture wastewater containing 19.41 mg L-1 total inorganic nitrogen and 1.31 mg L-1 total inorganic phosphorus. However, it was worth noting that adding exogenous acetate also led to an increase in the membrane resistance of the membrane module in the MPBR. Membrane resistance was mainly composed of internal resistance (Ri) and cake resistance (Rc), and with the increase of acetate content in the influent, their proportion in the total resistance gradually increased. Ri contributed the major membrane resistance and was most affected by acetate dosage. Ri reached 32.04 × 1012 m-1 with 1 g L-1 acetate, which accounted for 69.49% of total resistance. Moreover, with the increase of influent acetate concentration of the MPBRs, both the number of insoluble contaminants and dissolved organic contaminants in the membrane modules increased. In addition, the composition of proteins, polysaccharides, and humus in dissolved organic contaminants was close to that in extracellular polymeric substances and soluble microbial products secreted by microalgae. These results suggested that the membrane fouling of membrane modules was closely related to the algal biomass content in the MPBRs. The above results provided a theoretical basis for reducing membrane fouling of MPBR.

Microalgae harvesting for wastewater treatment and resources recovery: A review

Microalgae-based wastewater treatment has been conceived to obtain reclaimed water and produce microalgal biomass for bio-based products and biofuels generation. However, microalgal biomass harvesting is challenging and expensive, hence one of the main bottlenecks for full-scale implementation. Finding an integrated approach that covers concepts of engineering, green chemistry and the application of microbial anabolism driven towards the harvesting processes, is mandatory for the widespread establishment of full-scale microalgae wastewater treatment plants. By using nature-based substances and applying concepts of chemical functionalization in already established harvesting methods, the costs of harvesting processes could be reduced while preventing microalgae biomass contamination. Moreover, microalgae produced during wastewater treatment have unique culture characteristics, such as the consortia, which are primarily composed of microalgae and bacteria, that should be accounted for prior to downstream processing. The aim of this review is to examine recent advances in microalgal biomass harvesting and recovery in wastewater treatment systems, considering the impact of consortia variability. The costs of available harvesting technologies, such as coagulation/flocculation, coupled to sedimentation and differential air flotation, are provided. Additionally, promising technologies are discussed, including autoflocculation, bioflocculation, new filtration materials, nanotechnology, microfluidic and magnetic methods.

Enhancing sustainability through microalgae cultivation in urban wastewater for biostimulant production and nutrient recovery

Microalgae can produce biostimulants in form of phytohormones, which are compounds that, even if applied in low concentrations, can have stimulant effects on plants growth and can enhance their quality and their resistance to stress. Considering that microalgal biomass can grow recovering nutrients from wastewater, this circular approach allows to use residues for the production of high added value compounds (such as phytohormones) at low cost. The interest on biostimulants production from microalgae have recently raised. Scientists are focused on the direct application of these cellular extracts on plants, while the number of studies on the identification of bioactive molecules, such as phytohormones, is very scarce. Two cyanobacteria strains (Synechocystis sp. (SY) and Phormidium sp. (PH)) and a chlorophyte (Scenedesmus sp. (SC)) were cultured in laboratory-scale PBRs with a working volume of 2.5 L in secondary urban wastewater varying N:P ratio in the cultures to obtain the highest productivity. The variation of N:P ratio affects microalgae growth, and SY and PH presented higher productivities (73 and 48 mg L-1 d, respectively) under higher N:P ratio (> 22:1). Microalgal biomass was freeze-dried and phytohormones content was measured with ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). The three microalgae showed similar phytohormones profiles, being the auxin (indole-3-acetic acid, IAA) the most abundant (72 ng g-1DW in SY). Proteins were major macronutrient for all strains, reaching 48 %DW in PH culture. To optimize the biostimulants production, a balance between the production of such compounds, biomass productivity and nutrients removal should be taken into consideration. In this sense, SC was the most promising strain, showing the highest N and P removal rates (73 % and 59 %, respectively) while producing phytohormones.

Novel Biorefinery Approach for Phycocyanin Extraction and Purification and Biocrude Production from Arthrospira platensis

A new biorefinery from Arthrospira platensis was proposed to obtain phycocyanin (PC) and a biocrude by hydrothermal liquefaction (HTL). PC is a high-added-value phycobiliprotein widely used as a food colorant and in the nutraceutical and pharmaceutical industries. However, the use of conventional solvents in the extraction process and the purity grade of the extract are shortcomings in bioproduct production. PC was extracted using a reusable ionic liquid [EMIM][EtSO₄], achieving a PC purity of the lowest commercial grade. Therefore, two downstream processes were applied: (1) dialysis + precipitation and (2) aqueous two-phase system (ATPS) + dialysis + precipitation. After the second purification process, the PC purity increased remarkably to reach the analytical grade for pharmaceutical and nutraceutical applications. The waste biomass (WB) obtained in the PC extraction was valorized by hydrothermal liquefaction (HTL) to produce a biocrude. The biocrude yield and composition remarkably enhanced using isopropanol at 350 °C as a cosolvent.