Release of millions of micro(nano)plastic fragments from photooxidation of disposable plastic boxes

Reactive oxygen species drive aging-associated microplastic release in diverse infusion ingredients

Exposure routes and transport of microplastics (MPs) from the environment into the human bodies deserve considerable attention. Intravenous injection has been reported as a direct MP-intrusion pathway. However, it is unclear whether or how the infusion fluid composition influences polymer degradation and MP release. Here, we determined that the concentrations of MPs shed from infusion bags ranged from 522 to 5455 particles/L. The storage period, mechanical shaking, and storage temperature all contributed to MP release to some extent; however, the infusion fluid composition affected the formation of MPs more than any other factor. Infusion fluids containing moxifloxacin hydrochloride, etimicin sulfate, and sodium bicarbonate ringer's solution generated more reactive oxygen species than those containing sodium chloride, grape sugar, and glucose and sodium chloride. Specifically, the generation of reactive oxygen species (hydroxyl radicals, carbonate radicals, and single oxygen) facilitated oxygen-containing functional group formation and breaking of carbon chains on the surface of the polypropylene plastic, which increased aging and fragmentation. Overall, this study provides knowledge of the mechanisms underlying MP release from infusion bags during storage and transportation. This offers insight for optimizing the use and handling of infusion bags in medical settings to minimize contamination.

Inorganic Additives Induce More Small-Sized Microplastics Releasing from Medical Face Masks

Although previous studies have extensively explored the release of microplastics from masks, the specific influence of inorganic additives on microplastic emissions has remained unidentified. Herein, we performed a comparative analysis of medical face masks (MFMs) with calcium carbonate (CaCO3) additives against those devoid of CaCO3 to understand their roles in microplastic release. Briefly, our investigation employed surface-enhanced Raman spectroscopy (SERS) to examine micro- and nanoplastic release, while the stereoscopic characterization of mixing states of additives in microplastic was accomplished through a simulated Raman scattering (SRS). We also pioneered a three-dimensional imaging (3D imaging) method for investigating the internal aging of plastic using SRS, which clearly revealed the link between inorganic additives inside polymers and photoaging. We found that inorganic additives substantially accelerate the photoaging of the plastic materials through multiple pathways and induce more small-sized microplastics. Follow-up radical quenching experiments confirmed carbonate radicals as the main cause of this phenomenon. Our research exposes the hazardous potential of inorganic additives in masks to amplify the emission of microplastics.

Dynamic changes of leachates of aged plastic debris under different suspended sand concentrations and their toxicity

Plastic pollution in aquatic environments poses significant ecological risks, particularly through released leachates. While traditional or non-biodegradable plastics (non-BPs) are well-studied, biodegradable plastics (BPs) have emerged as alternatives that are designed to degrade more rapidly within the environment. However, research on the ecological risks of the leachates from aged BPs in aquatic environments is scarce. This controlled laboratory study investigated the leachate release processes and associated toxicity of traditional non-BPs, i.e., polyethylene terephthalate (PET) and polypropylene (PP) and BPs, i.e., polylactic acid (PLA) combined with polybutylene adipate terephthalate (PBAT) and starch-based plastic (SBP) under different aging time and suspended sand concentrations (0, 50, 100, 250, and 500 mg/L). The results indicated that BPs release significantly higher levels of dissolved organic carbon (DOC) than those of non-BPs, particularly at elevated suspended sand concentrations. The DOC concentrations in PLA+PBAT leachate reached 2.69 mg/L, surpassing those of PET and PP. Additionally, BPs released organic matter of larger molecular weight and protein-like substances. Toxicity tests showed that leachates from BPs inhibited the activity of Daphnia magna more than those from non-BPs. At a suspended sand concentration of 500 mg/L, PLA+PBAT leachate caused a 30 % inhibitory rate of Daphnia magna. Despite enhanced degradability, leachates from BPs may pose increased environmental risks in ecosystems with high suspended sand concentrations. Comprehensive ecological risk assessments are essential for effectively managing and mitigating these hazards of plastic pollution.

UV-B radiation aging changed the environmental behavior of polystyrene micro-/nanoplastics-adsorption kinetics of BDE-47, plankton toxicities and joint toxicities with BDE-47

UV-B radiation acts as an important environmental factor for aging micro-/nanoplastics (MNPs) in the marine environments, while the effect of aged MNPs on plankton is lacking specific research. Referencing to the UV-B radiation intensity in natural environments (2.29 W·m-2), we chose the floating polystyrene (PS) MNPs (50 nm, 1 µm) as the research target in this study. The results indicated that UV-B radiation aging for 30 days led to a rougher surface, increased SBET, increased hydrophobicity, and decreased negative charges of PS MNPs. Correspondingly, aged MNPs increased their adsorption abilities for 2,2',4,4'-tetrabromodiphenyl ether (BDE-47), especially for the initial stage. After UV-B radiation aging processes, the individual toxicities of the two sized MNPs on Thalassiosira pseudonana and Brachionus plicatilis both increased, while their joint toxicities with BDE-47 decreased on T. pseudonana but increased on B. plicatilis. The changes in toxicity were more pronounced in 1 µm PS MNPs under air-aged conditions. This study provided the data basis for evaluating the changes of MNPs environmental behaviors under UV-B radiation in the marine environments, with important ecological significance.

Neurotoxicity induced by aged microplastics from plastic bowls: Abnormal neurotransmission in Caenorhabditis elegans

The use of plastic bowls (PB) has garnered increasing scrutiny due to the inevitable generation of microplastics (MPs) throughout their lifecycle. Despite this concern, there exists a limited understanding of the behaviors, toxicological effects, and mechanisms associated with aged PB (A-PB). This research investigated the photoaging properties of A-PB following ultraviolet irradiation and evaluated the neurotoxic impact of exposure to A-PB at environmentally relevant concentrations (0.001-1 mg/L) on Caenorhabditis elegans. Significant alterations in the crystallinity, elemental composition, and functional groups of A-PB were observed compared to virgin PB (V-PB), along with the emergence of environmentally persistent free radicals and reactive oxygen species. Toxicity assessments revealed that exposure to 0.1-1 mg/L A-PB induced greater neurotoxicity on locomotion behaviors compared to V-PB, as evidenced by marked reductions in head thrashes, body bends, wavelength, and mean amplitude. Exposure to A-PB also altered the fluorescence intensities and neurodegeneration percentage of dopaminergic, serotonergic, and GABAergic neurons, suggesting neuronal damage in the nematodes. Correspondingly, decreases in the levels of dopamine, serotonin, and GABA were noted together with significant drops in the expression of neurotransmitter-related genes (e.g., dat-1, tph-1, and unc-47). Correlation analyses established a significant positive relationship between these genes and locomotion behaviors. Further exploration showed the absence of locomotion behaviors in dat-1 (ok157), tph-1 (mg280), and unc-47 (e307) mutants, underscoring the pivotal roles of the dat-1, tph-1, and unc-47 genes in mediating neurotoxicity in C. elegans. This study sheds light on the photoaging characteristics and heightened toxicity of A-PB, elucidating the mechanisms driving A-PB-induced neurotoxicity.

Profusion of microplastics in dental healthcare units; morphological, polymer, and seasonal trends with hazardous consequences for humans

Given the convenience of using plastics, addressing the growing concerns about their hazardous health effects is imperative. Consequently, a comprehensive risk assessment is necessary to gauge the potential harm microplastics pose. With its urgent call to action, this study aimed to investigate the indoor source and abundance of microplastics in private dental units during routine professional activities. The current analyzed microplastic quantity variations based on morphological characteristics, seasonal fluctuations and polymer-types. The polymer hazard index (PHI) was calculated to evaluate the significant human health risks posed to dental professionals by inhalation of microplastics. Dust samples were collected using a clean brush and steel pan from various flat and horizontal surfaces within each dental unit. The study found that clinical dental units had fewer microplastics (587 ± 184.9 MPs/g/day) than teaching hospitals (1083.80 ± 133.7MPs/g/day), with comparatively more abundance in winter (31 %). ATR-FTIR analysis determined polyethylene terephthalate to be a more abundant polymer (39 %). This study also found an average inhalation microplastic intake risk of 20.23 MP/g/day and 5259.85 MP/g/year for clinical and 29.45 MP/g/day and 765.12 MP/g/year for teaching hospital dental units. Female dental professionals have 1.1 times more microplastic inhalation risks than male dental professionals. According to PHI findings, overall minor to medium polymer risk was determined. In conclusion, this evidence-based research underscores the urgent need for a shift towards more sustainable practices in the dental healthcare sector. Dental professionals should prioritize using non-plastic material protective equipment and a proper ventilation system to reduce exposure to these particles.

New Insights into the Mechanisms of Toxicity of Aging Microplastics

Nowadays, synthetic polymer (plastic) particles are ubiquitous in the environment. It is known that for several decades microplastics (MPs) have been accumulating in the World Ocean, becoming available to a large variety of marine organisms. Particularly alarming is the accumulation of aging plastic particles, as the degradation processes of such particles increase their toxicity. The diverse display of negative properties of aging MPs and its effect on biota are still poorly understood. In this study, in vitro experiments modeling the interaction of pristine and UV-irradiated aging polypropylene (PP) fragments with hemocytes and mitochondria of bivalve mollusks Mytilus sp. were performed. The appearance of free radicals in the environment was recorded by spectral characteristics of indicator dyes-methylene blue (MB) and nitroblue tetrazolium (NBT). It was found that due to photooxidation, aging PP fragments sorbed more than threefold MB on their modified surface compared to pristine samples of this polymer. Using NBT, the formation of reactive oxygen species in seawater in the presence of pristine and photoactivated PP was recorded. It was also found that photodegraded PP fragments largely stimulated the development of lipid peroxidation processes in mitochondrial membranes and reduced the stability of hemocyte lysosome membranes compared to pristine PP fragments. In general, the results obtained concretize and supplement with experimental data the previously stated hypothesis of toxicity of aging MPs.

Nrf2-mediated ferroptosis inhibition: a novel approach for managing inflammatory diseases

Inflammatory diseases, including psoriasis, atherosclerosis, rheumatoid arthritis, and ulcerative colitis, are characterized by persistent inflammation. Moreover, the existing treatments for inflammatory diseases only provide temporary relief by controlling symptoms, and treatments of unstable and expensive. Therefore, new therapeutic solutions are urgently needed to address the underlying causes or symptoms of inflammatory diseases. Inflammation frequently coincides with a high level of (reactive oxygen species) ROS activation, serving as a fundamental element in numerous physiological and pathological phenotypes that can result in serious harm to the organism. Given its pivotal role in inflammation, oxidative stress, and ferroptosis, ROS represents a focal node for investigating the (nuclear factor E2-related factor 2) Nrf2 pathway and ferroptosis, both of which are intricately linked to ROS. Ferroptosis is mainly triggered by oxidative stress and involves iron-dependent lipid peroxidation. The transcription factor Nrf2 targets several genes within the ferroptosis pathway. Recent studies have shown that Nrf2 plays a significant role in three key ferroptosis-related routes, including the synthesis and metabolism of glutathione/glutathione peroxidase 4, iron metabolism, and lipid processes. As a result, ferroptosis-related treatments for inflammatory diseases have attracted much attention. Moreover, drugs targeting Nrf2 can be used to manage inflammatory conditions. This review aimed to assess ferroptosis regulation mechanism and the role of Nrf2 in ferroptosis inhibition. Therefore, this review article may provide the basis for more research regarding the treatment of inflammatory diseases through Nrf2-inhibited ferroptosis.

Biodegradation of polystyrene (PS) and polypropylene (PP) by deep-sea psychrophilic bacteria of Pseudoalteromonas in accompany with simultaneous release of microplastics and nanoplastics

Plastics dumped in the environment are fragmented into microplastics by various factors (UV, weathering, mechanical abrasion, animal chewing, etc.). However, little is known about plastic fragmentation and degradation mediated by deep-sea microflora. To obtain deep-sea bacteria that can degrade plastics, we enriched in situ for 1 year in the Western Pacific using PS as a carbon source. Subsequently, two deep-sea prevalent bacteria of the genus Pseudoalteromonas (Pseudoalteromonas lipolytica and Pseudoalteromonas tetraodonis) were isolated after 6 months enrichment in the laboratory under low temperature (15 °C). Both showed the ability to degrade polystyrene (PS) and polypropylene (PP), and biodegradation accelerated the generation of micro- and nanoplastics. Plastic biodegradation was evidenced by the formation of carboxyl and carboxylic acid groups, heat resistance decrease and plastic weight loss. After 80 days incubation at 15 °C, the microplastic concentration of PS and PP could be up to 1.94 × 107/L and 5.83 × 107/L, respectively, and the proportion of nanoplastics (< 1 μm) could be up to 65.8 % and 73.6 %. The film weight loss were 5.4 % and 4.5 % of the PS films, and 2.3 % and 1.8 % of the PP films by P. lipolytica and P. tetraodonis, respectively; thus after discounting the weight loss of microplastics, the only 3.9 % and 2.8 % of the PS films, and 1.3 % and 0.7 % of the PP films, respectively, were truly degraded by the two bacteria respectively after 80 days of incubation. This study highlights the role of Pseudoalteromonas in fragmentation and degradation of plastics in cold dark pelagic deep sea.

Photoaging Elevated the Genotoxicity of Polystyrene Microplastics to Marine Mussel Mytilus trossulus (Gould, 1850)

Micro-sized particles of synthetic polymers (microplastics) are found in all parts of marine ecosystems. This fact requires intensive study of the degree of danger of such particles to the life activity of hydrobionts and needs additional research. It is evident that hydrobionts in the marine environment are exposed to microplastics modified by biotic and abiotic degradation. To assess the toxic potential of aging microplastic, comparative studies were conducted on the response of cytochemical and genotoxic markers in hemocytes of the mussel Mytilus trossulus (Gould, 1850) after exposure to pristine and photodegraded (UV irradiation) polystyrene microparticles (µPS). The results of cytochemical tests showed that UV-irradiated µPS strongly reduced metabolism and destabilized lysosome membranes compared to pristine µPS. Using a Comet assay, it was shown that the nuclear DNA of mussel hemocytes showed high sensitivity to exposure to both types of plastics. However, the level of DNA damage was significantly higher in mussels exposed to aging µPS. It is suggested that the mechanism of increased toxicity of photo-oxidized µPS is based on free-radical reactions induced by the UV irradiation of polymers. The risks of toxic effects will be determined by the level of physicochemical degradation of the polymer, which can significantly affect the mechanisms of toxicity.

Environmental Markers of Plastics and Microplastics

The slow reaction rates to chemical and photochemical degradation are well-known properties of plastics. However, large plastic surfaces exposed to environmental conditions release particles and compounds that affect ecosystems and human health. The aim of this work was to identify compounds associated with the degradation of polyethylene (PE), polystyrene (PS), and polyvinyl chloride (PVC) microplastics (markers) on silica and sand and evaluate their use to screen microplastics on natural sand. Products were identified by using targeted and untargeted LC-HRMS analysis. All polymers underwent chemical oxidation on silica. PE released dicarboxylic acids (HO2C-(CH2)n-CO2H (n = 4-30), while PS released cis/trans-chalcone, trans-dypnone, 3-phenylpropiophenone, and dibenzoylmethane. PVC released dicarboxylic acids and aromatic compounds. Upon irradiation, PE was stable while PS released the same compounds as under chemical oxidation but at lower yields. Under the above condition, PVC generated HO2C-[CH2-CHCl]n-CH2-CO2H and HO2C-[CH2-CHCl]n-CO2H (n = 2-19) dicarboxylic acids. The same products were detected on sand but at a lower concentration than on silica due to better retention within the pores. Detection of markers of PE and PS on natural sand allowed us to screen microplastics by following a targeted analysis. Markers of PVC were not detected before or after thermal/photo-oxidation due to the low release of compounds and limitations associated with surface exposure/penetration of radiation.

Baking releases microplastics from polyethylene terephthalate bakeware as detected by optical photothermal infrared and quantum cascade laser infrared

The use of plastic bakeware is a potential source of human exposure to microplastics (MPs). However, characterizing MPs remains a challenge. This study aims to employ optical photothermal infrared (O-PTIR) and quantum cascade laser infrared (QCL-IR) technology to characterise polyethylene terephthalate (PET) MPs shed from PET bakeware during the baking process. The bakeware, filled with ultrapure water, underwent baking cycles at 220 °C for 20 min, 60 min, and three consecutive cycles of 60 min each. Subsequently, particles present in the ultrapure water were collected using an Al2O3 filter. O-PTIR and QCL-IR were used to characterise PET MPs collected from the filtration. Analysis revealed that QCL-IR spectra exhibited broader absorption peaks, compared to O-PTIR. Notably, MP spectra obtained from both techniques displayed common absorption peaks around 1119, 1623, 1341 and 1725 cm-1. The dominant size of PET MPs detected by O-PTIR and QCL-IR was 1-3 μm and 5-20 μm, respectively. The quantity of identified PET MPs using O-PTIR was 18 times greater than that with QCL-IR, which was attributed to variations in spatial resolution, sampling methods for spectra collection, and data analysis employed by the two methods. Importantly, findings from both techniques highlighted a notably large quantity of MPs released from PET bakeware, particularly evident after 3 cycles of 60 min of baking, suggesting a substantial increase in the potential ingestion of MPs, especially in scenarios involving extended baking durations. The research outcomes will guide consumers on minimizing the intake of microplastics by using PET bakeware for shorter baking time. Additionally, the study will yield valuable insights into the application of O-PTIR and QCL-IR for MPs detection, potentially inspiring advancements in MPs detection methodologies through cutting-edge technologies.

Are you drowned in microplastic pollution? A brief insight on the current knowledge for early career researchers developing novel remediation strategies

Microplastics (MPs) composed of different polymers with various shapes, within a vast granulometric distribution (1 μm - 5 mm) and with a wide variety of physicochemical surface and bulk characteristics spiral around the globe, with different atmospheric, oceanic, cryospheric, and terrestrial residence times, while interacting with other pollutants and biota. The challenges of microplastic pollution are related to the complex relationships between the microplastic generation mechanisms (physical, chemical, and biological), their physicochemical properties, their interactions with other pollutants and microorganisms, the changes in their properties with aging, and their small sizes that facilitate their diffusion and transportation between the air, water, land, and biota, thereby promoting their ubiquity. Early career researchers (ERCs) constitute an essential part of the scientific community committed to overcoming the challenges of microplastic pollution with their new ideas and innovative scientific perspectives for the development of remediation technologies. However, because of the enormous amount of scientific information available, it may be difficult for ERCs to determine the complexity of this environmental issue. This mini-review aims to provide a quick and updated overview of the essential insights of microplastic pollution to ERCs to help them acquire the background needed to develop highly innovative physical, chemical, and biological remediation technologies, as well as valorization proposals and environmental education and awareness campaigns. Moreover, the recommendations for the development of holistic microplastic pollution remediation strategies presented here can help ERCs propose technologies considering the environmental, social, and practical dimensions of microplastic pollution while fulfilling the current government policies to manage this plastic waste.

Continuous generation and release of microplastics and nanoplastics from polystyrene by plastic-degrading marine bacteria

Plastic waste released into the environments breaks down into microplastics due to weathering, ultraviolet (UV) radiation, mechanical abrasion, and animal grazing. However, little is known about the plastic fragmentation mediated by microbial degradation. Marine plastic-degrading bacteria may have a double-edged effect in removing plastics. In this study, two ubiquitous marine bacteria, Alcanivorax xenomutans and Halomonas titanicae, were confirmed to degrade polystyrene (PS) and lead to microplastic and nanoplastic generation. Biodegradation occurred during bacterial growth with PS as the sole energy source, and the formation of carboxyl and carboxylic acid groups, decreased heat resistance, generation of PS metabolic intermediates in cultures, and plastic weight loss were observed. The generation of microplastics was dynamic alongside PS biodegradation. The size of the released microplastics gradually changed from microsized plastics on the first day (1344 nm and 1480 nm, respectively) to nanoplastics on the 30th day (614 nm and 496 nm, respectively) by the two tested strains. The peak release from PS films reached 6.29 × 106 particles/L and 7.64 × 106 particles/L from degradation by A. xenomutans (Day 10) and H. titanicae (Day 5), respectively. Quantification revealed that 1.3% and 1.9% of PS was retained in the form of micro- and nanoplastics, while 4.5% and 1.9% were mineralized by A. xenomutans and H. titanicae at the end of incubation, respectively. This highlights the negative effects of microbial degradation, which results in the continuous release of numerous microplastics, especially nanoplastics, as a notable secondary pollution into marine ecosystems. Their fates in the vast aquatic system and their impact on marine lives are noted for further study.

Assessing the inconsistency of microplastic measurements in foods and beverages

The widespread occurrence of microplastics (MPs) in the food chain has gained substantial recognition as a pressing concern, highlighting the inevitability of human exposure through ingestion of foodborne MPs, coupled with the release of MPs from plastic packaging. However, there are notable disparities in the reported numbers of MPs in foods and beverages, warranting a thorough investigation into the factors contributing to these discrepancies. Table salt is one of the major sources of MPs, and there was an approximately hundred-fold difference between the reviewed studies that reported the highest and lowest number of MPs. In addition, more noticeable discrepancies were discovered between studies on MPs released from teabags. One study reported that approximately 15 billion MPs were released into a cup of tea from a single teabag, whereas another research paper found only approximately 106.3 ± 14.6 MP/teabag after brewing. This comprehensive review focuses on the inconsistencies observed across studies examining MPs, shedding light on the plausible factors underlying these variations. Furthermore, the review outlines areas in analytical procedures that require enhancement and offers recommendations to promote accuracy and standardization in future research efforts, such as employing analytical methods capable of confirming the presence of MPs, using appropriate filter sizes, considering representative sample sizes when extrapolation is involved, and so on. By pinpointing the detection processes leading to the inconsistent results observed in MP studies, this comparative analysis will contribute to the development of reliable analytic methods for understanding the extent of microplastic contamination in the human food chain.

Microplastics released from disposable medical devices and their toxic responses in Caenorhabditis elegans

Owing to accelerated urbanization and industrialization, many plastic products have been manufactured and discharged into the environment, causing environmental and public health problems. Plastics in environmental media are further degraded by prolonged exposure to light, heat, mechanical friction, and other factors to form new pollutants called microplastics (MPs). Medical plastics have become a crucial source of plastics in environmental media. However, the release profiles of MPs from medical plastics and their potential ecological and health risks remain unclear. We used optical photothermal infrared spectroscopy to explore the release profiles of eight typical disposable medical devices under high-temperature steam disinfection (HSD). We also evaluated the toxicity of disposable medical devices-derived MPs in Caenorhabditis elegans (C. elegans). Our results showed that the changes in the surface morphology and modification of the disposable medical devices were mainly associated with the material. Polypropylene (PP) and polystyrene (PS) materials exhibited high aging phenomena (e.g., bumps, depressions, bulges and cracks), and HSD broke their oxygen-containing functional groups and carbon chains. By contrast, minor changes in the chemical and physical properties were observed in the polyvinyl chloride (PVC)-prepared disposable medical devices under the same conditions. Further physicochemical characterization indicated that the amount of MPs released from PP-prepared disposable medical devices (P4: 1.27 ± 0.34 × 106) was greater than that from PVC-prepared disposable medical devices (P7: 1.08 ± 0.14 × 105). The particle size of the released MPs was the opposite, PVC-prepared disposable medical devices (P7: 11.45 ± 1.79 μm) > PP-prepared disposable medical devices (P4: 7.18 ± 0.52 μm). Toxicity assessment revealed that disposable medical devices-released MPs significantly increased germ cell apoptosisin C. elegans. Moreover, MPs from PP-prepared disposable medical devices disrupted the intestinal barrier of worms, decreasing their lifespan. Our findings provided novel information regarding the profiles and mechanisms of MP release from disposable medical devices and revealed their potential risks to ecological environment.

Microplastics are overestimated due to poor quality control of reagents

Microplastics are widely distributed in the environment and pose potential ecological risks, increasing to be one of the most important environmental pollutants. However, when assessing the characteristics of microplastic contamination in environmental samples, inadequate quality control measures for the working solutions may introduce additional microplastic contamination and lead to an overestimation of microplastic abundance in the samples. In this study, we evaluated the microplastic contamination characteristics in commonly used flotation and digestion reagents to assess errors caused by microplastics in the reagents. The results showed that the abundance of microplastics in the reagents ranged from 0.8 to 43.4 items/g, with the abundance of microplastics in flotation reagents being lower than that in digestion reagents. The shapes of the detected microplastics included particles, fibers, and fragments, and their size and outline were generally small, with most being below 100 µm. The most common types of polymers detected were polyethylene and polypropylene. In order to improve the universality and readability of the results, the detected microplastic abundances were converted into the actual application concentration of the working fluid. It was found that the potential contamination of microplastics in untreated flotation solutions ranged from 1.5 to 30.8 items/mL, while in digestion solutions ranged from 0.1 to 2.3 items/mL. Our study emphasizes the need for quality control measures, such as suction filtration, when evaluating microplastics in environmental samples or conducting chemical and biological tests related to microplastics.

Aging behavior of microplastics accelerated by mechanical fragmentation: alteration of intrinsic and extrinsic properties

Microplastics (MPs) inevitably undergo multiple aging processes during their life cycle in the environment. However, the information regarding the mechanical fragmentation behavior of MPs remained unclear, including the changes in the intrinsic properties of aged MPs, the measurement of aging degree, the underlying mechanism, and the interaction with heavy metals. Here, MPs (PS, PP, PET) were aged by crushing (-CR) and ball-milling (-BM) to simulate mild and severe mechanical fragmentation, respectively. Our results indicated that mechanical fragmentation significantly affected the morphology of MPs. The aging degree of MP-BM was deeper compared to MP-CR owing to smaller particle size, larger specific surface area, poorer heat resistance, better hydrophilicity, and richer oxygen-containing functional groups. The carbonyl index (CI) and O/C ratio were used to measure the aging degree of the two mechanical aging treatments. Besides, the mechanism was proposed and the discrepancy between the two treatments was elaborated from three aspects including the excitation energy source, reaction interface, and reaction dynamics. Furthermore, the extrinsic properties of MPs altered with the increase of aging degree; specifically, the adsorption capacities of heavy metals were enhanced. Meanwhile, it was unveiled that the CI value and O/C ratio played a vital role in estimating the adsorption ability of heavy metals. The findings not only reveal the mechanical fragmentation behavior of MPs but also provide new insights into the assessment of the potential risks of the aged MPs via chemical indexes.