One-step fabrication of cobalt-embedded carbon nitride as a magnetic and efficient heterogeneous catalyst for activating oxone to degrade pollutants in water

Modulating Direct Growth of Copper Cobaltite Nanostructure on Copper Mesh as a Hierarchical Catalyst of Oxone Activation for Efficient Elimination of Azo Toxicant

As cobalt (Co) has been the most useful element for activating Oxone to generate SO₄^•-, this study aims to develop a hierarchical catalyst with nanoscale functionality and macroscale convenience by decorating nanoscale Co-based oxides on macroscale supports. Specifically, a facile protocol is proposed by utilizing Cu mesh itself as a Cu source for fabricating CuCo₂O₄ on Cu mesh. By changing the dosages of the Co precursor and carbamide, various nanostructures of CuCo₂O₄ grown on a Cu mesh can be afforded, including nanoscale needles, flowers, and sheets. Even though the Cu mesh itself can be also transformed to a Cu-Oxide mesh, the growth of CuCo₂O₄ on the Cu mesh significantly improves its physical, chemical, and electrochemical properties, making these CuCo₂O₄@Cu meshes much more superior catalysts for activating Oxone to degrade the Azo toxicant, Acid Red 27. More interestingly, the flower-like CuCo₂O₄@Cu mesh exhibits a higher specific surface area and more superior electrochemical performance, enabling the flower-like CuCo₂O₄@Cu mesh to show the highest catalytic activity for Oxone activation to degrade Acid Red 27. The flower-like CuCo₂O₄@Cu mesh also exhibits a much lower E_a of Acid Red 27 degradation than the reported catalysts. These results demonstrate that CuCo₂O₄@Cu meshes are advantageous heterogeneous catalysts for Oxone activation, and especially, the flower-like CuCo₂O₄@Cu mesh appears as the most effective CuCo₂O₄@Cu mesh to eliminate the toxic Acid Red 27.

Ultrafast degradation of contaminants in a trace cobalt(II) activated peroxymonosulfate process triggered through borate: Indispensable role of intermediate complex

Among all homogeneous catalysts, cobalt ions show the highest catalytic performance for the activation of peroxymonosulfate (PMS). Herein, we report a Co²⁺/PMS/H₃BO₃ system that can effectively generate reactive oxygen species (ROS) with ultra-low Co²⁺ dosage (5 μg/L). Co²⁺/PMS/H₃BO₃ system showed ultrafast reactivity and wide applicability for various pollutants. Sulfamethoxazole (SMX, 2 mg/L) could be completely removed within 5 min, and the corresponding k_obs reached up to 1.1239 min^-1. The introduction of H₃BO₃ significantly promoted the generation of ROS. The turnover frequency (TOF) calculated through dividing k_obs by the cobalt ions concentration is as high as 224.78 min^-1, which is much higher than most of the current research. Through a series of theoretical and experimental analyses, the complex of H₂BO₃^--MS (HSO₅B(OH)₃^-) was inferred to be the key substance that led to the excellent performance of the system. This work provides new insights into the Co²⁺/PMS system in the presence of borate buffer.

Recent advances in graphitic carbon nitride as a catalyst for heterogeneous Fenton-like reactions

Graphitic carbon nitride (g-C₃N₄), an appealing metal-free polymer, has featured in extensive research in heterogeneous Fenton-like reactions owing to its advantages of stable chemical and thermal properties, ease of structural regulation and unique redox ability. However, there are still some gaps in the understanding of the mechanism and fate of g-C₃N₄ and its derivatives in heterogeneous Fenton reaction degradation of contaminants. This paper gives systematic emphasis to the development and progress of g-C₃N₄ and its composites as catalysts in heterogeneous Fenton-like reactions. The main synthesis strategies of g-C₃N₄ composites are discussed, including calcination, hydrothermal method and self-assembly method. Then, the key catalytic properties of g-C₃N₄ in Fenton-like applications, including anchoring nanoparticles, increasing specific surface area and exposed active surface sites, as well as regulating charge transfer reactions, are highlighted. Special emphasis is placed on its multifunctional role in heterogeneous Fenton-like reactions and the mechanisms involved in the activation of hydrogen peroxide, persulfates, and photocatalytic activation of persulfate. Lastly, the existing challenges and possible development direction of g-C₃N₄-coupling Fenton reactions are proposed. It is believed that this paper will bring useful information for the development of graphitic carbon nitride in both laboratory studies and practical applications.

Molecular Self-Assembly of Oxygen Deep-Doped Ultrathin C3N4 with a Built-In Electric Field for Efficient Photocatalytic H2 Evolution

Heteroatom-doped carbon nitride (C₃N₄) with a built-in electric field can reinforce the carrier separation; however, the stability will be greatly reduced due to the loss of surface-doped atoms. Here, molecule self-assembly, as a facile bottom-up approach, is explored for the synthesis and oxygen doping of C₃N₄. The obtained C₃N₄ presents a porous and ultrathin structure and oxygen deep-doping, which generate abundant nitrogen vacancies and a stable built-in electric field. Toward photocatalytic hydrogen evolution, the ultrathin and oxygen deep-doped C₃N₄ exhibits a 3.5-fold higher activity than bulk C₃N₄ under simulated sunlight, and 3.6 times higher stability than the oxygen surface-doped counterpart within five cycles. Femtosecond transient absorption spectroscopy indicates the improved carrier separation, and density functional theory (DFT) calculation reveals the promoted H₂O adsorption and activation under the built-in electric field, which contribute to the excellent photocatalytic performance of oxygen deep-doped ultrathin C₃N₄.

Graphitic carbon nitride-based materials in activating persulfate for aqueous organic pollutants degradation: A review on materials design and mechanisms

With the increasingly serious water environment problem, the persulfate-based advanced oxidation process (PS-AOP) has attracted considerable attention in water pollution treatment. To date, graphitic carbon nitride (g-C₃N₄) has been greatly favored by researchers in activating PS for its capability and unique superiorities. Though g-C₃N₄-based PS-AOP exhibits huge development prospects in removing organic pollutants, the review about its research progress has not been reported. Herein, this paper reviews the modification of g-C₃N₄ on the basis of its applications and properties for PS activation systematically. The activation mechanisms of g-C₃N₄-based modified materials are analyzed in detail, and the main formation pathways of radicals and non-radicals and their interaction mechanism with pollutants are thoroughly summarized. Finally, the existing challenges and future development directions of the PS-AOP driven by g-C₃N₄-based materials are critically discussed. The key purpose is to provide a reference for promoting the further popularization of this novel and efficient cooperative AOP in water purification industries, as well as multidisciplinary inspirations for g-C₃N₄-involved fields.

Recent advances in application of graphitic carbon nitride-based catalysts for degrading organic contaminants in water through advanced oxidation processes beyond photocatalysis: A critical review

Advanced oxidation processes (AOPs) have attracted much interest in the field of water treatment owing to their high removal efficiency for refractory organic contaminants. Graphitic carbon nitride (g-C₃N₄)-based catalysts with high performance and cost effectiveness are promising heterogeneous catalysts for AOPs. Most research on g-C₃N₄-based catalysts focuses on photocatalytic oxidation, but increasingly researchers are paying attention to the application of g-C₃N₄-based catalysts in other AOPs beyond photocatalysis. This review aims to concisely highlight recent state-of-the-art progress of g-C₃N₄-based catalysts in AOPs beyond photocatalysis. Emphasis is made on the application of g-C₃N₄-based catalysts in three classical AOPs including Fenton-based processes, catalytic ozonation and persulfates activation. The catalytic performance and involved mechanism of g-C₃N₄-based catalysts in these AOPs are discussed in detail. Meanwhile, the effect of water chemistry including pH, water temperature, natural organic matter, inorganic anions and dissolved oxygen on the catalytic performance of g-C₃N₄-based catalysts are summarized. Moreover, the reusability, stability and toxicity of g-C₃N₄-based catalysts in water treatment are also mentioned. Lastly, perspectives on the major challenges and opportunities of g-C₃N₄-based catalysts in these AOPs are proposed for better developments in the future research.

Controlled synthesis of bimetallic Prussian blue analogues to activate peroxymonosulfate for efficient bisphenol A degradation

Developing high-effective catalysts with tailored composition and structure has attracted extensive attention. In this work, a serious of shape-specific Fe/Co Prussian blue analogs (PBAs), including concave, core-shell and polygonal cubes were prepared by the one-step hydrothermal reaction, which were altered by adjusting the ratio of Fe/Co in the initial reaction system. The catalytic performance toward bisphenol A (BPA) degradation was significantly affected by the ultimate structure and Fe/Co composition. Benefiting from appropriate elemental proportions, unique elemental distribution (rich Co in the core and rich Fe in the shell) and high specific surface areas, the core-shell PBAs (CSPs) exhibits significantly higher peroxymonosulfate (PMS) activation performance toward bisphenol A (BPA) degradation (96 % of removal efficiency within 2 min). The stability of the CSPs catalyst test further indicates that the Fe shell can effectively protect and inhibit the leaching of cobalt ions. Electron paramagnetic resonance (EPR) and radical quenching experiments measurement exhibited that both SO₄^- and OH are the main active species in the degradation process. Our work expanded new ideas of designing novel PBAs with controllable shape and specific core-shell composition with excellent catalytic performance.

Graphitic carbon nitride decorated with FeNi3 nanoparticles for flexible planar micro-supercapacitor with ultrahigh energy density and quantum storage capacity

Schematic description of graphitic-C₃N₄@FeNi₃ (pseudocapacitive FeNi₃ and electrochemical double layer g-C₃N₄) heterostructure having energy density and quantum storage capacity for in-plane micro-supercapacitor application.