Resource utilization of luffa sponge to produce biochar for effective degradation of organic contaminants through persulfate activation

Insight into the degradation of carbamazepine by electrochemical-pressure UV-activated peroxodisulphate process: kinetics, radicals, and degradation pathway

In this work, to improve the performance of peroxodisulphate-advanced oxidation, an electrochemical oxidation-assisted UV light-activated peroxodisulphate system (E/UV/PDS) was used to degrade carbamazepine. The degradation of carbamazepine by PDS, E/PDS, UV/PDS and E/UV/PDS systems was compared, and their synergistic effects were analysed. The influence of single factors, such as PDS addition, initial pH, DS voltage, target initial concentration, etc., on the degradation of the E/UV/PDS system was discussed, and the optimal degradation process parameters were given. The active substances were determined by free radical inhibition experiments, such as 1O2, SO 4 - ⋅ and ⋅ OH . It was proved that 1O2 contributes much more to the degradation of carbamazepine than SO 4 - ⋅ and ⋅ OH . The degradation pathway of carbamazepine was proposed. Finally, the degradation mechanism of carbamazepine in the E/UV/PDS system was speculated. The results indicate that the electrochemical combined with the E/UV/PDS system is of great potential application value in the removal of antibiotic drug pollution and environmental purification.

Rational design of waste anode graphite-derived carbon catalyst to activate peroxymonosulfate for atrazine degradation

As the rapidly growing number of waste lithium-ion batteries (LIBs), the recycling and reutilization of anode graphite is of increasing interest. Converting waste anode graphite into functional materials may be a sensible option. Herein, a series of carbonaceous catalysts (TG) were successfully prepared using spent anode graphite calcined at various temperatures and applied for activating peroxymonosulfate (PMS) to degrade atrazine (ATZ). The catalyst obtained at 800 °C (TG-800) showed the optimum performance for ATZ removal (99.2% in 6 min). Various experimental conditions were explored to achieve the optimum efficiency of the system. In the TG-800/PMS system, free radicals (e.g., SO4·-, HO·), singlet oxygen (1O2), together with a direct electron transfer pathway all participated in ATZ degradation, and the ketonic (C=O) group was proved as the leading catalytic site for PMS activation. The potential degradation routes of ATZ have also been presented. According to the toxicity assessment experiments, the toxicity of the intermediate products decreased. The reusability and universal applicability of the TG-800 were also confirmed. This research not only provides an efficient PMS activator for pollutant degradation, but also offers a meaningful reference for the recovery of waste anode graphite to develop environmentally functional materials.

A magnetic solid phase extraction procedure for Pb(II) at trace levels on magnetic Luffa@TiO2 in food and water samples

A novel magnetic Luffa@TiO₂ sorbent was synthesized and characterized by using XRD, FTIR and SEM techniques. Magnetic Luffa@TiO₂ was used for solid phase extraction of Pb(II) in food and water samples prior to its flame atomic absorption spectrometric (FAAS) detection. The analytical parameters such as pH, adsorbent quantity, type and volume of eluent, and foreign ions were optimized. Analytical features such as the limit of detection (LOD) and the limit of quantification (LOQ) of Pb(II) are 0.04 μg L^-1 and 0.13 μg L^-1 for liquid samples and 0.159 ng/g and 0.529 ng/g for solid samples, respectively. The preconcentration factor (PF) and relative standard deviation (RSD%) were found 50, and 4 % respectively. The method was validated by using three certified reference materials (NIST SRM 1577b bovine liver, TMDA-53.3 and TMDA-64.3fortified water). The presented method was applied to lead contents of some food and natural water samples.

Bacteria-based biochar as a persulfate activator to degrade organic pollutants

Carbon-based catalysts for activating persulfate to drive advanced oxidation processes (AOPs) are widely used in wastewater treatment. In this study, Shewanella oneidensis MR-1, a typical ferric reducing electroactive microorganism, was utilized as the raw material of biochar (BC) to prepare a novel green catalyst (MBC). The effect of MBC on activating persulfate (PS) to degrade rhodamine B (RhB) was evaluated. Experimental results showed that MBC could effectively activate PS to degrade RhB to reach 91.70% within 270 min, which was 47.4% higher than that of pure strain MR-1. The increasing dosage of PS and MBC could improve the removal of RhB. Meanwhile, MBC/PS can well perform in a wide pH range, and MBC showed good stability, achieving 72.07% removal of RhB with MBC/PS after 5 cycles. Furthermore, the free radical quenching test and EPR experiments confirmed the presence of both free radical and non-free radical mechanisms in the MBC/PS system, with •OH, SO4•- and 1O2 contributing to the effective degradation of RhB. This study successfully provided a new application for bacteria to be used in the biochar field.

Engineered ball-milled colloidal activated carbon material for advanced oxidation process of ibuprofen: Influencing factors and insights into the mechanism

This study explores a simple and efficient, physically modified ball-milled activated carbon (AC_BM) preparation from granular activated carbon (GAC), which can be demonstrated for groundwater application. The colloidal stability of the AC_BM plays a vital role in the activation of peroxymonosulfate (PMS) and the degradation of pollutants. Adsorption kinetics and isotherm studies explain that the AC_BM has more active sites and maximum adsorption capacity (q_max = 509 mg g^-1) on the surface of the materials than GAC. The 92% of ibuprofen degradation was achieved at 240 min along with 0.1 g L^-1 of AC_BM, 5 mM of PMS, and 6.3 of initial solution pH. A chemical scavenger and electron spin resonance spectra also confirmed the formation of reactive oxygen species such as radicals (O₂^•-, HO^•, SO₄^•-) and non-radical (¹O₂) in the AC_BM/PMS system. Three major degradation pathways, hydroxylation, demethylation, and decarboxylation involved in ibuprofen degradation. Nearly 13 degradation by-products were detected during the AC_BM/PMS oxidation of ibuprofen. The toxicity analysis of oxidation by-products of ibuprofen was also discussed by computational simulation employing the ecological structure-activity relationships software. The AC_BM/PMS system was successfully applied to the natural groundwater system for ibuprofen degradation. Hence, the AC_BM/PMS system is an excellent catalyst for real groundwater applications.

Dual redox cycles of Mn(Ⅱ)/Mn(III) and Mn(III)/Mn(IV) on porous Mn/N co-doped biochar surfaces for promoting peroxymonosulfate activation and ciprofloxacin degradation

Mn and N co-doped biochar (Mn-N-TS) was prepared as an effective catalyst to activate peroxymonosulfate (PMS) for ciprofloxacin (CIP) degradation. As opposed to Mn-TS and N-TS, Mn-N-TS had more active sites containing N and Mn, as well as a greater specific surface area (923.733 m² g^-1). The Mn-N-TS exhibited excellent PMS activation ability. In the Mn-N-TS/PMS system, the CIP removal efficiency was 91.9% in 120 min. Mn and N co-doping could accelerate electron transfer between CIP and PMS molecules. Simultaneously, defect sites, graphitic N, pyridinic N, C═O groups, and Mn(II)/Mn(III)/Mn(IV) redox cycles acted as active sites to activate PMS and generate free radicals (OH, SO₄^- and ¹O₂). Furthermore, the Mn-N-TS/PMS system could effectively degrade CIP in a wide pH range, background substances, and actual water. Finally, a probable mechanism of PMS activation by Mn-N-TS was proposed. In conclusion, this work gave a novel direction for the rational design of Mn and N co-doped biochar.

Novel 3D carbon fibers derived from Luffa wastes for oil/water separation

In this study, the 3D structure of carbon fibers (CFs) was prepared from Luffa sponge wastes by H₃PO₄ impregnation with various ratios and a low-temperature carbonization process at 500 °C in a nitrogen atmosphere. The H₃PO₄-treated Luffa sponge had higher thermal stability and carbonic yield (∼60-70%) than neat-Luffa (∼21%). Characterization analyses exposed that the synthesized CFs derived from H₃PO₄-treated Luffa exhibited oleophilic and hydrophobic carbonic nature with 3D sponge skeletal, reflecting an ideal structure for oil sorption. The engine oil sorption properties on the CFs were studied by varying the contact time. The engine oil sorption equilibrium data for 3D CFs samples was explained by the pseudo-second-order and intraparticle diffusion models. The equilibrium oil sorption capacities of 3D CFs were as large as 23.1 ± 0.4 g/g for engine oil, 23.7 ± 1.0 g/g for gasoline, 28.1 ± 1.0 g/g for almond oil, and 29.2 ± 0.8 g/g for pomegranate seed oil in 20 min. Moreover, the optimized 3D CFs can be selectively for oil/water separation applications, such as high capacities for various oils, fast kinetic sorption, and reusability (>6 cycles). This research presented a facile and cost-effective process for the 3D CFs through recycling Luffa sponge wastes for rapid oil sorption.

Study on persulfate activated by Ce-modified tea waste biochar to degrade tetracycline

In this study, the Ce-modified tea residue biochar (Ce-TBC) was successfully generated and applied to the biochar/persulfate system (Ce-TBC/PDS), the mechanism of the removal of tetracycline (TC) using Ce-TBC/PDS was elaborated. Under the optimal experimental conditions (Ce-TBC = 0.8 g L^-1, PDS = 4 mM, TC = 10 mg L^-1), the removal efficiency of TC was 91.28%, and after 5 cycles, the elimination rate of Ce-TBC/PDS still reached up to 80%. The mechanism of TC removal by Ce-TBC/PDS was analyzed by scanning electron microscopy (SEM), X-ray diffractometer (XRD), Fourier infrared transform spectrometer (FT-IR), and X-ray photoelectron spectrometer (XPS) characterization, and influence factor experiments. The results showed that the introduction of CeO_x increased the oxygen vacancies on the TBC surface and promoted the interconversion between Ce³⁺ and Ce⁴⁺ for better activation of PDS and generation of active species. Free radical quenching experiments and paramagnetic resonance spectrometry (EPR) analysis showed that the non-radical pathway ¹O₂ played a dominant role in the Ce-TBC/PDS system. The present work provided an efficient means of PDS activator and recycling of tea waste.

Application of biochar activated persulfate in the treatment of typical azo pigment wastewater

With the increase of the azo pigment wastewater, it is necessary to seek an efficient and sustainable treatment method to address issues of damaging water ecosystems and human health. In this work, organic representing azo dye Acid Orange 7 (AO7), heavy metal representing hexavalent chromium (Cr(VI)), and inorganic representing ammonia nitrogen (NH₄⁺-N) were selected to roughly simulate the azo pigment wastewater. The simultaneous decontamination of multi-target pollutants by 700 °C pyrolyzed peanut shell biochar (BC) with persulfate (PDS) was evaluated. The results showed that AO7, Cr(VI) and NH₄⁺-N could finally reach 100%, 85% and 30% removal ratios separately in the BC/PDS/mixed pollutants system under certain basic conditions. Functional groups (hydroxyl groups (C-OH) and carboxylic ester/lactone groups (O-C=O)) were found by XPS as competing sites for adsorption and activation and were gradually consumed as the reaction proceeded. Combining a series of experiments results and EPR analysis, it was found that AO7 removal worked best and it relied on both the radical pathway (including SO₄^•-, •OH, O₂^-•, but not ¹O₂) and adsorption. Cr(VI) was mainly adsorbed and reduced by BC surface to form Cr(OH)₃ and Cr₂O₃, and the remaining part could be reduced by O₂^-•, followed by •OH. NH₄⁺-N was removed primarily by the radical same as AO7. Meanwhile, the three target pollutants have a co-competitive mechanism. Specifically, they competed for radicals and adsorption sites simultaneously, while the presence of AO7 and NH₄⁺-N would consume the generated oxidizing radicals and further promote the removal of Cr(VI). The fixed-bed reactor simulated the continuous treatment of wastewater. Various anions (chloride (Cl^-), nitrate (NO₃^-), carbonate (CO₃^2-), and hydrogen phosphate (HPO₄^2-)) interfered differently with the pollutant removal. These findings demonstrate a new dimension of BC potential for decontamination of azo pigment wastewater.

Resource utilization of chicken manure to produce biochar for effective removal of levofloxacin hydrochloride through peroxymonosulfate activation: The synergetic function of graphitization and nitrogen functionality

Transforming hazardous livestock manure into biochar as an advanced oxidation processes catalyst is a two-in-one strategy to treat waste by waste. In this work, a self-modified biochar catalyst obtained from chicken manure is developed for peroxymonosulfate activation to degrade levofloxacin hydrochloride. The deterioration rate of levofloxacin hydrochloride reached 89% in 40 min, after three cycles of the catalyst, the LFX still maintained 52% degradation rate. And under low levofloxacin hydrochloride concentration, the degradation rate can reach 99% within 40 min. Apart from catalyst characterization and optimization, the effects of catalyst, peroxymonosulfate, levofloxacin hydrochloride, co-existing anions, and natural organic matter concentrations during the reaction are investigated. Additionally, the quenching experiments and electron spin resonance spectroscopy both reveal the reaction mechanism. As the graphitic nitrogen combined with the sp²-hybridized carbon in biochar was highly electronegative, thus appealing electrons from neighboring carbon networks, making the adjoining carbon atoms to be positively charged, which facilitated the degradation process. The oxidative degradation of levofloxacin hydrochloride was ascribed to non-radical routes including surface-bound radicals, h⁺ and ¹O₂ mediated oxidation, the contribution rates were 91%, 93.5%, and 96.8%, respectively. Moreover, possible degradation pathways of levofloxacin hydrochloride are studied by Density Functional Theory (DFT) and LC-MS analysis. This work provides a novel method to produce chicken manure biochar by self-modified chicken manure during biochar pyrolysis for peroxymonosulfate activation in organic contaminations abatement and reveals the combined effect of graphitization and nitrogen functionalization while providing new ideas for the resource utilization of chicken manure.

Efficient Degradation of Printing and Dyeing Wastewater by Lotus Leaf-Based Nitrogen Self-Doped Mesoporous Biochar Activated Persulfate: Synergistic Mechanism of Adsorption and Catalysis

The discharge of printing and dyeing wastewater has been increasing, causing serious environmental pollution with the rapid development of the industry. Based on this, an N self-doped mesoporous lotus leaf biochar (LLC800) was prepared from lotus leaves as raw material for the activation of Persulfate (PS) to degrade wastewater from printing and dyeing. The removal rate of AO7 by PS, LLC800 and LLC800/PS systems were 0.84%, 31.11% and 99.46%, respectively. Electron paramagnetic resonance spectroscopy (EPR) and quench tests showed the presence of free radicals (•OH, SO4●− and O2●−) and nonradical (1O2) in the LLC800/PS system, where nonradicals (1O2) play an important role in the degradation of AO7. The “N self-doped” effect formed by the high N content of lotus leaves is the main factor leading to the high adsorption and catalytic performance of lotus leaf biochar. The effect of pyrolysis temperature on the performance of biochar can be attributed to the change of N content and conformation and specific surface area in biochar. Moreover, the LLC800/PS system has a strong resistance to interference. This work can provide technical support for the preparation of high-performance adsorption-catalytic biochar and the development of high-performance activation materials for persulfate.

Surface Modification of Biochar for Dye Removal from Wastewater

Nowadays, biochar is being studied to a great degree because of its potential for carbon sequestration, soil improvement, climate change mitigation, catalysis, wastewater treatment, energy storage, and waste management. The present review emphasizes on the utilization of biochar and biochar-based nanocomposites to play a key role in decontaminating dyes from wastewater. Numerous trials are underway to synthesize functionalized, surface engineered biochar-based nanocomposites that can sufficiently remove dye-contaminated wastewater. The removal of dyes from wastewater via natural and modified biochar follows numerous mechanisms such as precipitation, surface complexation, ion exchange, cation–π interactions, and electrostatic attraction. Further, biochar production and modification promote good adsorption capacity for dye removal owing to the properties tailored from the production stage and linked with specific adsorption mechanisms such as hydrophobic and electrostatic interactions. Meanwhile, a framework for artificial neural networking and machine learning to model the dye removal efficiency of biochar from wastewater is proposed even though such studies are still in their infancy stage. The present review article recommends that smart technologies for modelling and forecasting the potential of such modification of biochar should be included for their proper applications.