Enhanced removal of lead ions and methyl orange from wastewater using polyethyleneimine grafted UiO-66-NH2 nanoparticles

Synergistic removal of tetracycline in water with highly stable Lac immobilized on magnetic metal-organic framework

The arbitrary discharge of tetracycline (TC) residuals has seriously influenced the ecosystem and human health. Laccase (Lac)-based biodegradation technology is considered a more effective way to remove TC due to its high catalytic efficiency and less by-product. Nevertheless, free Lac suffers from poor stability, easy inactivation and difficult recovery, restricting its application. Immobilization of Lac is considered an efficient strategy for addressing these obstacles. In this study, a magnetic metal-organic framework of Fe3O4@SiO2@UiO-66-NH2 (MMOF) was prepared and used as a carrier to immobilize Lac (Lac@MMOF) for TC degradation. Benefiting from the multiple binding sites, adsorption, and protection effect of MMOF, Lac@MMOF displayed a wider pH application range (2-7) and better thermal (15-85 °C), repeatability, and storage stability than free Lac. Furthermore, owing to the synergism of MOF adsorption and Lac biocatalysis, the removal rate of Lac@MMOF for TC could be up to 98 % at pH = 7 within 1 hr, which was 1.29 and 1.24 times that of free Lac and MMOF, respectively. More importantly, Lac@MMOF could easily be separated from aqueous solution under a magnetic field and maintained good removal performance (80 %) after five cycles. The degradation products were identified by applying LC-MS/MS, and possible degradation mechanisms and pathways were proposed. Finally, the antibacterial activity of intermediate products was evaluated using Escherichia coli, which revealed that the toxicity of TC was reduced effectively by the degradation of Lac@MMOF. Overall, Lac@MMOF is a green alternative for residual antibiotic removal in water.

Novel green magnetite-chitosan adsorbent using Ricinus communis plants to adsorption of lead (II) from wastewater solution: anodic linear sweep voltammetry, isotherms, and kinetics study

This study centered on removing toxic Pb (II) ions from wastewater using Fe3O4 with natural biopolymer chitosan and green plant extracts from Ricinus communis (Castor plant) to synthesize a novel magnetic chitosan nano-composites (GCS-Fe3O4) adsorbent. The nano-material was synthesized using the co-precipitation method and characterized using FTIR, XRD, FESEM, TEM, SEM, AFM, TGA-DTA, DLS, UV-Vis, and VSM. The green-synthesized nanocomposites (GCS-Fe3O4) have been used to remove Pb (II) from a wastewater solution. A study was conducted on the experimental parameters, such as the pH range, contact time, adsorbent dosage, and temperature effects, the highest capacity of adsorption Pb (II) ions observed at a pH 6.8, a temperature of 30℃, a contact time of 60 min., with an adsorbent dose of 0.30 g/L. The maximum removal of Pb (II) ions was 99.2%, obtained at a concentration of 0.30 g/L. The Freundlich isotherm stipulated the most precise simulation of the adsorption equilibrium. The maximum adsorption capacity was determined to be 48.64 mg/g at 30℃ using the Freundlich isotherm. The pseudo-second-order kinetic model most accurately represented the adsorption kinetics of Pb (II). In contrast, thermodynamic data shows an endothermic adsorption process with temperature, the adsorption efficiency also increases to 5.35, 7.17, and 8.90 kJ/mol respectively. The Pb (II) ions were determined by 797 VA anodic linear sweep voltammetry Computrace (Metrohm). Hence, the synthesized green magnetite chitosan composite (GCS-Fe3O4) is suitable for removing Pb (II) ions from wastewater solutions.

Hollow Biomass Adsorbent Derived from Platanus Officinalis Grafted with Polydopamine-Mediated Polyethyleneimine for the Removal of Eriochrome Black T from Water

Platanus officinalis fibers (PFs) taking advantage of high-availability, eco-friendly and low-cost characteristics have attracted significant focus in the field of biomaterial application. Polyethyleneimine grafted with polydopamine on magnetic Platanus officinalis fibers (PEI-PDA@M-PFs) were prepared through a two-step process of mussel inspiration and the Michael addition reaction, which can work as an effective multifunctional biomass adsorbent for anionic dye with outstanding separation capacity and efficiency. The as-prepared PEI-PDA@M-PFs possess desirable hydrophilicity, magnetism and positive charge, along with abundant amino functional groups on the surface, facilitating efficient adsorption and the removal of Eriochrome Black T (EBT) dyes from water. In addition to the formation mechanism, the adsorption properties, including adsorption isotherms, kinetics, and the reusability of the absorbent, were studied intensively. The as-prepared PEI-PDA@M-PFs achieved a theoretical maximum adsorption capacity of 166.11 mg/g under optimal conditions (pH 7.0), with 10 mg of the adsorbent introduced into the EBT solution. The pseudo-second-order kinetic and Langmuir models were well matched with experimental data. Moreover, thermodynamic data ΔH > 0 revealed homogeneous chemical adsorption with a heat-absorption reaction. The adsorbent remained at high stability and recyclability even after five cycles of EBT adsorption processes. These above findings provide new insights into the adsorption processes and the development of biologic material for sustainable applications.

One-Step Synthesis of Polyethyleneimine-Grafted Styrene-Maleic Anhydride Copolymer Adsorbents for Effective Adsorption of Anionic Dyes

Wastewater containing organic dyes has become one of the important challenges in water treatment due to its high salt content and resistance to natural degradation. In this work, a novelty adsorbent, PEI-SMA, was prepared by grafting polyethyleneimine (PEI) onto styrene-maleic anhydride copolymer (SMA) through an amidation reaction. The various factors, such as pH, adsorbent dosage, contact time, dye concentration, and temperature, which may affect the adsorption of PEI-SMA for Reactive Black 5 (RB5), were systematically investigated by static adsorption experiments. The adsorption process of PEI-SMA for RB5 was more consistent with the Langmuir isotherm model and the pseudo-second-order model, suggesting a single-layer chemisorption. PEI-SMA exhibits excellent adsorption performance for RB5 dye, with a maximum adsorption capacity of 1749.19 mg g-1 at pH = 2. Additionally, PEI-SMA exhibited highly efficient RB5 competitive adsorption against coexisting Cl- and SO42- ions and cationic dyes. The adsorption mechanism was explored, and it can be explained as the synergistic effect of electrostatic interaction, hydrogen bonding and π-π interaction. This study demonstrates that PEI-SMA could act as a high performance and promising candidate for the effective adsorption of anionic dyes from aqueous solutions.

Progressive Insights into Metal-Organic Frameworks and Metal-Organic Framework-Membrane Composite Systems for Wastewater Management

The sustainable management of wastewater through recycling and utilization stands as a pressing concern in the trajectory of societal advancement. Prioritizing the elimination of diverse organic contaminants is paramount in wastewater treatment, garnering significant attention from researchers worldwide. Emerging metal-organic framework materials (MOFs), bridging organic and inorganic attributes, have surfaced as novel adsorbents, showcasing pivotal potential in wastewater remediation. Nevertheless, challenges like limited water stability, elevated dissolution rates, and inadequate hydrophobicity persist in the context of wastewater treatment. To enhance the performance of MOFs, they can be modified through chemical or physical methods, and combined with membrane materials as additives to create membrane composite materials. These membrane composites, derived from MOFs, exhibit remarkable characteristics including enhanced porosity, adjustable pore dimensions, superior permeability, optimal conductivity, and robust water stability. Their ability to effectively sequester organic compounds has spurred significant research in this field. This paper introduces methods for enhancing the performance of MOFs and explores their potential applications in water treatment. It delves into the detailed design, synthesis strategies, and fabrication of composite membranes using MOFs. Furthermore, it focuses on the application prospects, challenges, and opportunities associated with MOF composite membranes in water treatment.

Adsorption of cationic/anionic dyes and endocrine disruptors by yeast/cyclodextrin polymer composites

Factory and natural wastewaters contain a wide range of organic pollutants. Therefore, multifunctional adsorbents must be developed that can purify wastewater. Phytic acid-cross-linked Baker's yeast cyclodextrin polymer composites (IBY-PA-CDP) were prepared using a one-pot method. IBY-PA-CDP was used to adsorb methylene blue (MB), bisphenol A (BPA), and methyl orange (MO). Studies on the ionic strength and strongly acidic ion salts confirmed that IBY-PA-CDP adsorbs MO through hydrophobic interactions. This also shows that Na+ was the direct cause of the increased MO removal. Adsorption studies on binary systems showed that MB/MO inhibited the adsorption of BPA by IBY-PA-CDP. The presence of MB increased the removal rate of MO by IBY-PA-CDP due to the bridging effect. The Langmuir isotherm model calculated the maximum adsorption capacities for MB and BPA to be 630.96 and 83.31 mg g-1, respectively. However, the Freundlich model is more suitable for fitting the experimental data for MO adsorption. To understand the rate-limiting stage of adsorption, a mass-transfer mechanism model was employed. The fitting results show that adsorption onto the active sites is the rate-determining step. After five regeneration cycles, IBY-PA-CDP could be reused with good stability and recyclability.

Thiol-Functionalized MIL-100(Fe)/Device for the Removal of Heavy Metals in Water

The preparation of a functional device based on a functionalized MIL-100(Fe) metal-organic framework for the solid-phase extraction of heavy metals is reported. By a simple and easy straightforward grafting procedure, a thiol-functionalized MIL-100(Fe) material (MIL-100(Fe)-SH) with a S/Fe ratio of 0.80 and a surface area of 840 m2 g-1 was obtained. MIL-100(Fe)-SH exhibited a higher Hg(II) extraction (96 ± 5%) than that of MIL-100(Fe) (78 ± 4%) due to the interaction between thiol groups and Hg(II) ions. For practical applications, the obtained MIL-100(Fe)-SH was integrated by a simple method to a 3D printed support based on a matrix of interconnected cubes using poly(vinylidene fluoride) as binder, obtaining a functional device that simultaneously acts as stirrer and sorbent. The developed device showed high efficiency for the removal of Hg(II), good reusability, and excellent performance for the simultaneous preconcentration and further detection and quantification of Hg(II), Pb(II), and As(V) in tap, well, and lake water samples.

Efficient removal of copper and silver ions in electroplating wastewater by magnetic-MOF-based hydrogel and a reuse case for photocatalytic application

Direct discharge of electroplating wastewater containing hazardous metal ions such as Cu2+ and Ag + results in environmental pollution. In this study, we rationally prepare a magnetic composite hydrogel consisted of Fe3O4, UiO-66-NH2, chitosan (CTS) and polyethyleneimine (PEI), namely Fe3O4@UiO-66-NH2/CTS-PEI. Thanks to the strong attraction between the amino group and metal cations, the Fe3O4@UiO-66-NH2/CTS-PEI hydrogel shows the maximum adsorption capacities of 321.67 mg g-1 for Cu2+ ions and 226.88 mg g-1 for Ag + ions within 120 min. As real scenario, the Fe3O4@UiO-66-NH2/CTS-PEI hydrogel exhibits excellent removal efficiencies for metallic ions even in the complicated media of actual electroplating wastewater. In addition, we explore the competitive adsorption order of metal cations by using experimental characterization and theoretical calculations. The optimal configuration of CTS-PEI is also discovered with the density functional theory, and the water retention within hydrogel is simulated through molecular dynamics modeling. We find that the Fe3O4@UiO-66-NH2/CTS-PEI hydrogel could be reused and after 5 cycles of adsorption-desorption, removal efficiency could maintain 80%. Finally, the Ag+ accumulated by hydrogel are reduced to generate a photocatalyst for efficient degradation of Rhodamine B. The novel magnetic hydrogel paves a promising path for efficient removal of heavy metal ions in wastewater and further resource utilization as photocatalysts.

Biomimetic Polylactic Acid Electrospun Fibers Grafted with Polyethyleneimine for Highly Efficient Methyl Orange and Cr(VI) Removal

The rapid growth of industrialization has resulted in the release of large quantities of pollutants into the environment, especially dyes and heavy metals, which are environmentally hazardous for humans and animals. It is considered as the most promising and environmentally friendly route to develop green materials by using the green modification method, which has no negative impact on the environment. In this work, the green material of polylactic acid (PLA) was used as the substrate material, and a novel modification method of polydopamine (PDA)-assisted polyethyleneimine (PEI) grafting was developed. The electrospun PLA fibers are mainly composed of stereocomplex crystallites, which were achieved via the electrospinning of poly(l-lactic acid) and poly(d-lactic acid). The water-soluble PEI was grafted onto the PDA-modified PLA fibers through the glutaraldehyde-assisted cross-linking reaction. The prepared composite fibers can be degraded, which is environmentally friendly and meets the requirements of sustainable development. The potential application of such PLA composite fibers in wastewater treatment was intensively evaluated. The results show that at appropriate fabrication conditions (PDA concentration of 3 g·L^-1 and a PEI molecular weight of 70,000 g·mol^-1), the composite fibers exhibit the maximum adsorption capacities of 612 and 398.41 mg·g^-1 for methyl orange (MO) and hexavalent chromium [Cr(VI)], respectively. Simultaneously, about 64.79% of Cr(VI) adsorbed on the composite fibers was reduced to Cr(III). The above results show that the PLA composite fibers have a good development prospect in the field of wastewater treatment.

Extraction of Gold Based on Ionic Liquid Immobilized in UiO-66: An Efficient and Reusable Way to Avoid IL Loss Caused by Ion Exchange in Solvent Extraction

Ionic liquids (ILs) have received considerable attention as a promising green solvent for extracting metal ions from aqueous solutions. However, the recycling of ILs remains difficult and challenging because of the leaching of ILs, which is caused by the ion exchange extraction mechanism and hydrolysis of ILs in acidic aqueous conditions. In this study, a series of imidazolium-based ILs were confined in a metal-organic framework (MOF) material (UiO-66) to overcome the limitations when used in solvent extraction. The effect of the various anions and cations of the ILs on the adsorption ability of AuCl₄^- was studied, and 1-hexyl-3-methylimidazole tetrafluoroborate ([HMIm]⁺[BF₄]^-@UiO-66) was used for the construction of a stable composite. The adsorption properties and mechanism of [HMIm]⁺[BF₄]^-@UiO-66 for Au(III) adsorption were also studied. The concentrations of tetrafluoroborate ([BF₄]^-) in the aqueous phase after Au(III) adsorption by [HMIm]⁺[BF₄]^-@UiO-66 and liquid-liquid extraction by [HMIm]⁺[BF₄]^- IL were 0.122 mg/L and 18040 mg/L, respectively. The results reveal that Au(III) coordinated with the N-containing functional groups, while [BF₄]^- was effectively confined in UiO-66, instead of undergoing anion exchange in liquid-liquid extraction. Electrostatic interactions and the reduction of Au(III) to Au(0) were also important factors determining the adsorption ability of Au(III). [HMIm]⁺[BF₄]^-@UiO-66 could be easily regenerated and reused for three cycles without any significant drop in the adsorption capacity.

Removal of Hg2+ in wastewater by grafting nitrogen/sulfur-containing molecule onto Uio-66-NH2: from synthesis to adsorption studies

The remediation of heavy metal deserves to be on the agenda, with the adsorbent design bearing the brunt of it. In this study, the molecule (4, 6-diamino-2-mercaptopyrimidine, DMP) containing thiol (-SH) and amino (-NH₂) functional groups was grafted onto Uio-66-NH₂, and a composite metal-organic framework nanomaterial (Zr(NH₂)-DMP) was synthesized via a facile post-modification scheme. The morphological characteristics and structural features of the modified adsorbent were characterized by XRD, FT-IR, FE-SEM, EDS, BET, and XPS. The characterization results verified that the post-modification scheme was successfully achieved. The adsorption experiments were carried out to investigate the removal performance of the Zr(NH₂)-DMP towards Hg²⁺ under different influencing parameters. The maximum adsorption capacity of 389.4 mg/g was obtained, and the adsorption equilibrium was achieved within 30 min at pH 6 at room temperature. Adsorption thermodynamic study indicated that the adsorption process was exothermic and spontaneous. The Zr(NH₂)-DMP exhibited excellent selectivity for Hg²⁺, and also has the potential to remove Cu²⁺, Fe²⁺, and Zn²⁺ ions. The introduction of Cl^- inhibited the removal of Hg²⁺ due to the formation of mercuric chlorides (removal efficiency reduced from 97.8 to 95.6%). The removal efficiency of up to 86.7% was obtained after four cycles. The Langmuir isotherm and Pseudo-second kinetic were more suitable for fitting the adsorption process of Hg²⁺ by Zr(NH₂)-DMP. The main removal mechanism could be attributed to the chelation between Hg²⁺ (soft acid) and nitrogen/sulfur (soft base) elements. These findings convinced that the successful synthesis of Zr(NH₂)-DMP provides an option for Hg²⁺ removal from wastewater.

Metal-organic frameworks for food contaminant adsorption and detection

Metal-organic framework materials (MOFs) have been widely used in food contamination adsorption and detection due to their large specific surface area, specific pore structure and flexible post-modification. MOFs with specific pore size can be targeted for selective adsorption of some contaminants and can be used as pretreatment and pre-concentration steps to purify samples and enrich target analytes for food contamination detection to improve the detection efficiency. In addition, MOFs, as a new functional material, play an important role in developing new rapid detection methods that are simple, portable, inexpensive and with high sensitivity and accuracy. The aim of this paper is to summarize the latest and insightful research results on MOFs for the adsorption and detection of food contaminants. By summarizing Zn-based, Cu-based and Zr-based MOFs with low cost, easily available raw materials and convenient synthesis conditions, we describe their principles and discuss their applications in chemical and biological contaminant adsorption and sensing detection in terms of stability, adsorption capacity and sensitivity. Finally, we present the limitations and challenges of MOFs in food detection, hoping to provide some ideas for future development.