Superhydrophobic Nanoparticles: An Efficiently Selective Adsorbent for Surfactant-Like Contaminants from Complex Wastewater Matrices

Surfactant-like contaminants (SLCs) with distinctive amphiphilic structures have become a global concern in wastewater due to their toxicity and persistency. Despite extensive efforts, achieving efficient and selective SLCs removal remains challenging because of their wide range of molecular weights and complex functional group compositions. Superhydrophobic nanoparticles can potentially tackle this challenge by targeting the long oleophilic chains of SLCs. However, conventional contact angle measurements hinder hydrophobicity characterization and corresponding selectivity research because of the powder morphology of nanoparticles. Herein, the authors offered information regarding the distribution of water molecular probes in surfaces and proposed a quantitative characterization approach based on low-field nuclear magnetic resonance. Through synthesizing superhydrophobic and hydrophilic polydopamine nanospheres with similar morphologies, the selective adsorption potential of superhydrophobic nanoparticles for SLCs is systematically demonstrated. As revealed by the interaction mechanisms, the superhydrophobic surface of nanospheres increased its affinity and selectivity for SLCs adsorption by enhancing hydrophobic interactions. Superhydrophobic modification achieved ten times the adsorption capacity of sodium dodecyl benzene sulfonate, an exemplified surfactant, compared with pristine nanoparticles. By regulated self-polymerization, the superhydrophobic nanospheres are coated onto the surface of a 3D sponge and enable efficient selective SLCs adsorption from highly polluted leachate matrices with long-term stability and reusability.

Selective and Controlled Release Responsive Nanoparticles with Adsorption-Pairing Synergy for Anthocyanin Extraction

Anthocyanins with different structures have different anti-inflammatory and anti-cancer properties. Precise structural use can improve the chemopreventive effects of anthocyanins and enhance treatment outcomes because the anthocyanin structure influences its functional sites and activities. However, owing to the available variety of anthocyanins and their complex structures, the low matching of intermolecular forces between existing adsorbents and anthocyanins limits the targeted separation of anthocyanin monomers. Short-range and efficient selective binding, which is difficult to achieve, is the current focus in the extraction field. We here developed self-assembled Fe3O4-based nano adsorbers with different surface modifications based on adsorption-pairing synergy. The electrostatic force, coordination bond, hydrogen bond, and π-π* bond together induced selective adsorption between Fe3O4 nanoparticles and anthocyanin molecules. An acid-release solution disrupted the polarity balance in the aforementioned association system, thereby promoting the controlled release of anthocyanins. Among the candidates, the effects of morphology, particle size, surface charge, and functional group on adsorption performance were analyzed. The polyacrylamide-modified magnetic Fe3O4 nanoparticles were found to be favorable for selectively extracting anthocyanin, with an adsorption capacity of 19.74 ± 0.07 mg g-1. The release percentage of cyanidin-3-O-glucoside reached up to 98.6% ± 1.4%. This study offers a scientific basis for developing feasible nanotechniques to extract anthocyanins and plant active substances.

Annealed SiO2 Protective Layer on LiMn2O4 for Enhanced Li-Ion Extraction from Brine

In this study, we present a novel approach for selective Li-ion extraction from brine using an LiMn2O4 ion sieve coated with a dense silica layer, denoted as LMO@SiO2. The SiO2 layer is controllably coated onto the LMO surface, forming passivation layers and ion permeation filters. This design effectively minimizes the acidic corrosion of the LMO and enhances the Li+ adsorption capacity. Additionally, the SiO2 layer undergoes calcination at various temperatures (ranging from 300 to 700 °C) to achieve different compactness levels of the coating layer, providing further protection to the LMO crystal structures. As a result of these improvements, the optimized LMO@SiO2 adsorbent demonstrates an exceptional Li+ adsorption capacity of 18.5 mg/g for brine, and even after seven adsorption-elution cycles, it maintains a capacity of 15.3 mg/g. This outstanding performance makes our material a promising candidate for efficient Li+ extraction from brine or other low-concentration Li+ solutions in future applications.

Adsorption Behavior of a Ternary Covalent Organic Polymer Anchored with SO3H for Ciprofloxacin

Owing to the poor treatment efficiency of wastewater containing fluoroquinolones (FQs), effective removal of such pollutants has become a significant issue in waste management. In this study, a ternary covalent organic polymer anchored with SO3H (COP-SO3H) was designed using the Schiff reaction and a multicomponent solvent thermal method. The synthesized COP-SO3H polymer possesses multiple functional binding sites, including amide groups, sulfonic groups, and aromatic frameworks, enabling it to effectively adsorb ciprofloxacin (which belongs to FQs) through mechanisms such as pore-filling effects, electrostatic interactions, hydrogen bonding, π-π electron donor-acceptor (EDA) interactions, and hydrophilic-lipophilic balance. COP-SO3H demonstrated outstanding adsorption performance for ciprofloxacin, exhibiting a high adsorption capacity, broad pH stability, strong resistance to ionic interference, and good regenerability. Moreover, it displayed preferential selectivity toward fluoroquinolone antibiotics. The present study not only investigates the intricate structural and functional design of COP-SO3H materials but also presents potential applications for the efficient adsorption of specific antibiotics.

Immobilization of Microcystin by the Hydrogel-Biochar Composite to Enhance Biodegradation during Drinking Water Treatment

Microcystin-LR (MC-LR), the most common algal toxin in freshwater, poses an escalating threat to safe drinking water. This study aims to develop an engineered biofiltration system for water treatment, employing a composite of poly(diallyldimethylammonium chloride)-biochar (PDDA-BC) as a filtration medium. The objective is to capture MC-LR selectively and quickly from water, enabling subsequent biodegradation of toxin by bacteria embedded on the composite. The results showed that PDDA-BC exhibited a high selectivity in adsorbing MC-LR, even in the presence of competing natural organic matter and anions. The adsorption kinetics of MC-LR was faster, and capacity was greater compared to traditional adsorbents, achieving a capture rate of 98% for MC-LR (200 μg/L) within minutes to tens of minutes. Notably, the efficient adsorption of MC-LR was also observed in natural lake waters, underscoring the substantial potential of PDDA-BC for immobilizing MC-LR during biofiltration. Density functional theory calculations revealed that the synergetic effects of electrostatic interaction and π-π stacking predominantly contribute to the adsorption selectivity of MC-LR. Furthermore, experimental results validated that the combination of PDDA-BC with MC-degrading bacteria offered a promising and effective approach to achieve a sustainable removal of MC-LR through an "adsorption-biodegradation" process.

CO2 Adsorption Behaviors of Biomass-Based Activated Carbons Prepared by a Microwave/Steam Activation Technique for Molecular Sieve

In this study, the activated carbon was prepared with superior CO2 selective adsorption properties using walnut shells, a biomass waste, as a precursor. The activations were conducted at various times using the microwave heating technique in a steam atmosphere. The surface morphology and chemical composition of activated carbon were analyzed using a scanning electron microscope and energy-dispersive X-ray spectroscopy. The textural properties were investigated using the N2/77K isothermal method, and the structural characteristics were examined using X-ray diffraction analysis. The CO2 and H2 adsorption properties of activated carbon were analyzed using a thermogravimetric analyzer and a high-pressure isothermal adsorption apparatus, respectively, under atmospheric and high-pressure conditions. Depending on the activation time, the specific surface area and total pore volume of the activated carbon were 570-690 m2/g and 0.26-0.34 cm3/g, respectively. The adsorption behaviors of CO2 of the activated carbon were different under atmospheric and high-pressure conditions. At atmospheric pressure, a significant dependence on micropores with diameters less than 0.8 nm was observed, whereas, at high pressure, the micropores and mesopores in the range of 1.6-2.4 nm exhibited a significant dependence. However, H2 adsorption did not occur at relatively low pressures. Consequently, the prepared activated carbon exhibited superior selective adsorption properties for CO2.

The Influences of Pore Blockage by Natural Organic Matter and Pore Dimension Tuning on Pharmaceutical Adsorption onto GO-Fe3O4

The ubiquitous presence of pharmaceutical pollution in the environment and its adverse impacts on public health and aquatic ecosystems have recently attracted increasing attention. Graphene oxide coated with magnetite (GO-Fe₃O₄) is effective at removing pharmaceuticals in water by adsorption. However, the myriad compositions in real water are known to adversely impact the adsorption performance. One objective of this study was to investigate the influence of pore blockage by natural organic matter (NOM) with different sizes on pharmaceutical adsorption onto GO-Fe₃O₄. Meanwhile, the feasibility of pore dimension tuning of GO-Fe₃O₄ for selective adsorption of pharmaceuticals with different structural characteristics was explored. It was shown in the batch experiments that the adsorbed pharmaceutical concentrations onto GO-Fe₃O₄ were significantly affected (dropped by 2-86%) by NOM that had size ranges similar to the pore dimensions of GO-Fe₃O₄, as the impact was enhanced when the adsorption occurred at acidic pHs (e.g., pH 3). Specific surface areas, zeta potentials, pore volumes, and pore-size distributions of GO-Fe₃O₄ were influenced by the Fe content forming different-sized Fe₃O₄ between GO layers. Low Fe contents in GO-Fe₃O₄ increased the formation of nano-sized pores (2.0-12.5 nm) that were efficient in the adsorption of pharmaceuticals with low molecular weights (e.g., 129 kDa) or planar structures via size discrimination or inter-planar π-π interaction, respectively. As excess larger-sized pores (e.g., >50 nm) were formed on the surface of GO-Fe₃O₄ due to higher Fe contents, pharmaceuticals with larger molecular weights (e.g., 296 kDa) or those removed by electrostatic attraction between the adsorbate and adsorbent dominated on the GO-Fe₃O₄ surface. Given these observations, the surface characteristics of GO-Fe₃O₄ were alterable to selectively remove different pharmaceuticals in water by adsorption, and the critical factors determining the adsorption performance were discussed. These findings provide useful views on the feasibility of treating pharmaceutical wastewater, recycling valuable pharmaceuticals, or removing those with risks to public health and ecosystems.

Efficient and Selective Adsorption of Cationic Dye Malachite Green by Kiwi-Peel-Based Biosorbents

In this study, pristine kiwi peel (KP) and nitric acid modified kiwi peel (NA-KP) based adsorbents were prepared and evaluated for selective removal of cationic dye. The morphology and chemical structure of KP and NA-KP were fully characterized and compared, and results showed nitric acid modification introduced more functional groups. Moreover, the adsorption kinetics and isotherms of malachite green (MG) by KP and NA-KP were investigated and discussed. The results showed that the adsorption process of MG onto KP followed a pseudo-second-order kinetic model and the Langmuir isotherm model, while the adsorption process of MG onto NA-KP followed a pseudo-first-order kinetic model and the Freundlich isotherm model. Notably, the Langmuir maximum adsorption capacity of NA-KP was 580.61 mg g^-1, which was superior to that of KP (297.15 mg g^-1). Furthermore, thermodynamic studies demonstrated the feasible, spontaneous, and endothermic nature of the adsorption process of MG by NA-KP. Importantly, NA-KP showed superior selectivity to KP towards cationic dye MG against anionic dye methyl orange (MO). When the molar ratio of MG/MO was 1:1, the separation factor (α_MG/MO) of NA-KP was 698.10, which was 5.93 times of KP. In addition, hydrogen bonding, π-π interactions, and electrostatic interaction played important roles during the MG adsorption process by NA-KP. This work provided a low-cost, eco-friendly, and efficient option for the selective removal of cationic dye from dyeing wastewater.

Amine-Functionalized A-Center Sphalerite for Selective and Efficient Destruction of Perfluorooctanoic Acid

Perfluorochemicals (PFCs), especially perfluorooctanoic acid (PFOA), have contaminated the ground and surface waters throughout the world. Efficient removal of PFCs from contaminated waters has been a major challenge. This study developed a novel UV-based reaction system to achieve fast PFOA adsorption and decomposition without addition of sacrificial chemicals by using synthetic photocatalyst sphalerite (ZnS-[N]) with sufficient surface amination and defects. The obtained ZnS-[N] has the capability of both reduction and oxidation due to the suitable band gap and photo-generated hole-trapping properties created by surface defects. The cooperated organic amine functional groups on the surface of ZnS-[N] play a crucial role in the selective adsorption of PFOA, which guarantee the efficient destruction of PFOA subsequently, and 1 μg L^-1 PFOA could be degraded to <70 ng L^-1 after 3 h in the presence of 0.75 g L^-1 ZnS-[N] under 500 W UV irradiation. In this process, the photogenerated electrons (reduction) and holes (oxidation) on the ZnS-[N] surface work in a synergistic manner to achieve complete defluorination of PFOA. This study not only provides promising green technology for PFC-pollution remediation but also highlights the significance of developing a target system capable of both reduction and oxidation for PFC degradation.

Chirality-Controlled Mercapto-β-cyclodextrin Covalent Organic Frameworks for Selective Adsorption and Chromatographic Enantioseparation

Chiral covalent organic frameworks (CCOFs) benefit from superior stability, abundant chiral environment, and homogeneous pore configuration. In its constructive tactics, only the post-modification method allows for the integration of supramolecular chiral selectors into achiral COFs. Here, the finding utilizes 6-deoxy-6-mercapto-β-cyclodextrin (SH-β-CD) as chiral subunits and 2,5-dihydroxy-1,4-benzenedicarboxaldehyde (DVA) as the platform molecule to synthesize chiral functional monomers through thiol-ene click reactions and directly establish ternary "pendant-type" SH-β-CD COFs. The chiral site density on SH-β-CD COFs was regulated by changing the proportion of chiral monomers to obtain an optimal construction strategy and remarkably improve the ability of chiral separation. SH-β-CD COFs were coated on the inner wall of the capillary in a covalently bound manner. The prepared open tubular capillary was achieved for the separation of six chiral drugs. By combining the outcomes of selective adsorption and chromatographic separation, we observed the higher density of chiral sites in the CCOFs, and poorer results were achieved. From the perspective of spatial conformational distribution, we interpret the variation in the performance of these chirality-controlled CCOFs for selective adsorption and chiral separation.

Selective Adsorption Behavior and Mechanism for Cd(II) in Aqueous Solution with a Recoverable Magnetie-Surface Ion-Imprinted Polymer

A novel recoverable magnetic Cd(II) ion-imprinted polymer was synthesized on the surface of silica-coated Fe₃O₄ particles via the surface imprinting technique and chemical grafting method. The resulting polymer was used as a highly efficient adsorbent for the removal of Cd(II) ions from aqueous solutions. The adsorption experiments revealed that Fe₃O₄@SiO₂@IIP had a maximum adsorption capacity of up to 29.82 mg·g^-1 for Cd(II) at an optimal pH of 6, with the adsorption equilibrium achieved within 20 min. The adsorption process followed the pseudo-second-order kinetic model and the Langmuir isotherm adsorption model. Thermodynamic studies showed that the adsorption of Cd(II) on the imprinted polymer was spontaneous and entropy-increasing. Furthermore, the Fe₃O₄@SiO₂@IIP could rapidly achieve solid-liquid separation in the presence of an external magnetic field. More importantly, despite the poor affinity of the functional groups constructed on the polymer surface for Cd(II), we improved the specific selectivity of the imprinted adsorbent for Cd(II) through surface imprinting technology. The selective adsorption mechanism was verified by XPS and DFT theoretical calculations.

Covalent scrambling in porous polyarylthioethers through a stepwise SNAr for tunable bandgap and porosity

Porous poly(aryl thioether)s offer stability and electronic tunability by robust sulfur-aryl conjugated architecture, but synthetic access is hindered due to limited control over the nucleophilic nature of sulfides and the air sensitivity of aromatic thiols. Here, we report a simple, one-pot, inexpensive, regioselective synthesis of highly porous poly(aryl thioether)s through polycondensation of perfluoroaromatic compounds with sodium sulfide. The unprecedented temperature-dependent para-directing formation of thioether linkages leads to a stepwise transition of the polymer extension into a network, thereby allowing fine control of the porosity and optical bandgaps. The obtained porous organic polymers with ultra-microporosity (<1 nm) and sulfur as the surface functional groups show size-dependent separation of organic micropollutants and selective removal of mercury ions from water. Our findings offer easy access to poly(aryl thioether)s with accessible sulfur functionalities and higher complexity, which will help in realizing advanced synthetic designs in applications such as adsorption, (photo)catalysis, and (opto)electronics.

Synthesis of core-shell material rich in carboxyl groups and its application in the selective adsorption of cationic peptides

The ability to extract peptides and proteins from biological samples with excellent reusability, high adsorption capacity, and great selectivity is essential in scientific research and medical applications. Inspired by the advantages of core-shell materials, we fabricated a core-shell material using amino-functionalized silica as the core. Benzene-1,3,5-tricarbaldehyde and 3,5-diaminobenzoic acid were used as model organic ligands to construct a shell coating by alternately reacting the two monomers on the surface of silica microspheres. The resultant material featured an outstanding capability for the adsorption of cationic peptides, most likely owing to its porous structure, a large number of carboxylic functional groups, and low mass-transfer resistance. The maximum saturated adsorption capacity reached 833.3 mg·g^-1 and the adsorption process took only 20 min. Under optimized adsorption conditions, the core-shell material was used to selectively adsorb cationic peptides from the tryptic digestive solution of lysozyme and bovine serum albumin, Specifically, the analysis results showed seven cationic peptides in the eluate and twenty anionic peptides in the supernatant, which indicates the efficient trap of most cationic peptides in the digestive solution. This article is protected by copyright. All rights reserved.

Extraction of Gold Based on Ionic Liquid Immobilized in UiO-66: An Efficient and Reusable Way to Avoid IL Loss Caused by Ion Exchange in Solvent Extraction

Ionic liquids (ILs) have received considerable attention as a promising green solvent for extracting metal ions from aqueous solutions. However, the recycling of ILs remains difficult and challenging because of the leaching of ILs, which is caused by the ion exchange extraction mechanism and hydrolysis of ILs in acidic aqueous conditions. In this study, a series of imidazolium-based ILs were confined in a metal-organic framework (MOF) material (UiO-66) to overcome the limitations when used in solvent extraction. The effect of the various anions and cations of the ILs on the adsorption ability of AuCl₄^- was studied, and 1-hexyl-3-methylimidazole tetrafluoroborate ([HMIm]⁺[BF₄]^-@UiO-66) was used for the construction of a stable composite. The adsorption properties and mechanism of [HMIm]⁺[BF₄]^-@UiO-66 for Au(III) adsorption were also studied. The concentrations of tetrafluoroborate ([BF₄]^-) in the aqueous phase after Au(III) adsorption by [HMIm]⁺[BF₄]^-@UiO-66 and liquid-liquid extraction by [HMIm]⁺[BF₄]^- IL were 0.122 mg/L and 18040 mg/L, respectively. The results reveal that Au(III) coordinated with the N-containing functional groups, while [BF₄]^- was effectively confined in UiO-66, instead of undergoing anion exchange in liquid-liquid extraction. Electrostatic interactions and the reduction of Au(III) to Au(0) were also important factors determining the adsorption ability of Au(III). [HMIm]⁺[BF₄]^-@UiO-66 could be easily regenerated and reused for three cycles without any significant drop in the adsorption capacity.

Selective Adsorption of Quercetin by the Sol-Gel Surface Molecularly Imprinted Polymer

Quercetin, as one of the most biologically active natural flavonoids, is widely found in various vegetables, fruits and Chinese herbs. In this work, molecularly imprinted polymer (MIP) was synthesized through surface molecular imprinting technology with sol-gel polymerization mechanism on SiO₂ at room temperature using quercetin as the template, SiO₂ as the supporter, 3-aminopropyltriethoxysilane (APTES) as the functional monomer, and tetraethoxysilane (TEOS) as the cross-linker. The prepared MIP was characterized via scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FT-IR) and nitrogen adsorption measurements to validate its surface morphology, structure and functionality. SEM images revealed that the morphology of MIP was rough and spherical with the particle size of 260 nm larger than that of the support SiO₂. In the FTIR spectra of MIP, the band around 1499 cm^-1 and 2932 cm^-1 were assigned to N-H and C-H groups, respectively. The results indicated that the imprinted polymer layers were grafted on the surface of SiO₂ and the MIP had been successfully prepared. Since the specific surface area and pore volume of MIP were markedly higher than those of NIP and SiO₂ and were 52.10 m² g^-1 and 0.150 cm³ g^-1, respectively, it was evident that the imprinting process created corresponding imprinted cavities and porosity. The MIP for adsorbing quercetin was evaluated by static adsorption experiment. The results indicated that the adsorption equilibrium could be reached within 90 min and the maximum adsorption capacity was as high as 35.70 mg/g. The mechanism for adsorption kinetics and isotherm of MIP for quercetin was proved to conform the pseudo-second-order kinetics model (R² = 0.9930) and the Freundlich isotherm model (R² = 0.9999), respectively, revealing that chemical adsorption and heterogeneous surface with multilayer adsorption dominated. In contrast to non-imprinted polymer (NIP), the MIP demonstrated high selectivity and specific recognition towards quercetin whose selectivity coefficients for quercetin relative to biochanin A were 1.61. Furthermore, the adsorption capacity of MIP can be maintaining above 90% after five regeneration cycles, indicating brilliant reusability and potential application for selective adsorption of quercetin.

Exploring the Potential of a Highly Scalable Metal-Organic Framework CALF-20 for Selective Gas Adsorption at Low Pressure

In this study, the ability of the highly scalable metal-organic framework (MOF) CALF-20 to adsorb polar and non-polar gases at low pressure was investigated using grand canonical Monte Carlo (GCMC) and molecular dynamics (MD) simulations. The results from the simulated adsorption isotherms revealed that the highest loading was achieved for SO₂ and Cl₂, while the lowest loading was found for F₂ molecules. The analysis of interaction energies indicated that SO₂ molecules were able to form the strongest adsorbent-adsorbate interactions and had a tight molecular packing due to their polarity and angular structure. Additionally, Cl₂ gas was found to be highly adsorbed due to its large van der Waals surface and strong chemical affinity in CALF-20 pores. MD simulations showed that SO₂ and Cl₂ had the lowest mobility inside CALF-20 pores. The values of the Henry coefficient and isosteric heat of adsorption confirmed that CALF-20 could selectively adsorb SO₂ and Cl₂. Based on the results, it was concluded that CALF-20 is a suitable adsorbent for SO₂ and Cl₂ but not for F₂. This research emphasizes the importance of molecular size, geometry, and polarity in determining the suitability of a porous material as an adsorbent for specific adsorbates.

Developing Water-Stable Pore-Partitioned Metal-Organic Frameworks with Multi-Level Symmetry for High-Performance Sorption Applications

A new perspective is proposed in the design of pore-space-partitioned MOFs that is focused on ligand symmetry properties sub-divided here into three hierarchical levels: 1) overall ligand, 2) ligand substructure such as backbone or core, and 3) the substituent groups. Different combinations of the above symmetry properties exist. Given the close correlation between nature of chemical moiety and its symmetry, such a unique perspective into ligand symmetry and sub-symmetry in MOF design translates into the influences on MOF properties. Five new MOFs have been prepared that exhibit excellent hydrothermal stability and high-performance adsorption properties with potential applications such as C₃ H₆ /C₂ H₄ and C₂ H₂ /CO₂ selective adsorption. The combination of high stability with high benzene/cyclohexane selectivity of ≈13.7 is also of particular interest.

Metabolomic analysis and ecofriendly enrichment of sunflower meal extract

BACKGROUND

The presence of phenolic compounds in sunflower is well reported in the literature; however, knowledge is scarce when it comes to the composition of other secondary metabolites in this species and their by-products. This work evaluated, for the first time, the phytochemical composition of sunflower meal produced in Brazil. A combination of mixture design and central composite rotatable design 2³ models was then applied to maximize the recovery of bioactive compounds using ecologically friendly solvents and concentrating by applying activated carbon, a sustainable adsorbent. The product of this extraction-concentration was also evaluated by an untargeted metabolomic approach using ultra-performance liquid chromatography coupled to mass spectrometry.

RESULTS

A diverse and abundant profile of phenolic compounds was obtained from Brazilian sunflower meal: in total, 51 natural products were tentatively identified, 35 of which for the first time in sunflower. The sorption capacity of the activated charcoal, in the optimized process conditions, was effective in the separation and concentration of minority secondary metabolites. The ecofriendly extract proved to be enriched in plumberoside, p-coumaric acid, and alkaloids.

CONCLUSIONS

Investigation of the phytochemical profile of sunflower meal produced in Brazil pointed to several secondary metabolites reported for the first time in sunflower samples, including phenolic compounds, alkaloids, and terpenes. The use of activated charcoal in an alkaline medium as an adsorbent for the concentration of these phytochemicals, from an aqueous extract, generated a potentially cost-effective, ecofriendly extract, enriched in minor metabolites, indicating a possible innovative way to selectively obtain these compounds from sunflower meal. © 2022 Society of Chemical Industry.

Ligand-Functional Groups Induced Tuning MOFs' 2D into 1D Pore Channels for Pipeline Natural Gas Purification

The solvothermal reactions of CoCl₂  ⋅ 6H₂ O, 3,5-pyridinedicarboxylic acid (H₂ L) and isonicotinic acid (HL₁ )/3-amino isonicotinic acid (HL₂ )/3-chloro isonicotinic acid (HL₃ ) successfully led to three tfz-d topological pillar-layer [Co₄ (μ-F)₂ (COO)₆ (NC₅ H₄ )₄ ] cluster-based MOFs, namely, [Co₄ (μ-F)₂ (L)₂ (L₁ )₂  ⋅ 2DMA] ⋅ DMA ⋅ 2H₂ O (SNNU-Bai76, SNNU-Bai=Shaanxi Normal University Bai's group), [Co₄ (μ-F)₂ (L)₂ (L₂ )₂  ⋅ 2H₂ O] ⋅ 2DMA ⋅ 2H₂ O (SNNU-Bai77) and [Co₄ (μ-F)₂ (L)₂ (L₃ )₂  ⋅ 2H₂ O] ⋅ 2DMF ⋅ 2H₂ O (SNNU-Bai78). With the 2D pore channels in SNNU-Bai76 and SNNU-Bai77 being tuned to the 1D pore channel in SNNU-Bai78, C₃ H₈ and C₂ H₆ adsorption uptakes are apparently improved and the IAST selectivities of C₃ H₈ /CH₄ and C₂ H₆ /CH₄ almost remain, which indicate that SNNU-Bai78 may be one potential separation material for the pipeline natural gas purification. These were further confirmed by the breakthrough experiments for the simulated pipeline natural gas (C₃ H₈ /C₂ H₆ /CH₄  : 5/10/85 gas mixture) of three isostructural MOFs. Furthermore, GCMC simulations revealed that due to one of the pore channels blocked by Cl atoms in a couple of 3-chloro isonicotinic acid with the changed conformation as the pillar, the pore wall of the formed 1D pore channel in SNNU-Bai78 may interact with the adsorbed C₃ H₈ or C₂ H₆ molecule more strongly, for which more atoms of framework at the new adsorption site will interact with the adsorbed gas molecule by more intermolecular interactions. This was also evidenced by the increased binding energies, being consistent with the tuning of adsorption enthalpies for C₃ H₈ and C₂ H₆ gas molecules, and the reduced C₃ H₈ and C₂ H₆ gas diffusion coefficients in SNNU-Bai78. Very interestingly, this work is the first example of finely tuning the pore connectivity of MOFs toward strengthened host-guest interactions for the gas adsorption and separation.

Theoretical Investigations on MIL-100(M) (M=Cr, Sc, Fe) with High Adsorption Selectivity for Nitrogen and Carbon Dioxide over Methane

The removal of impurity gases (N₂ , CO₂ ) in natural gas is critical to the efficient use of natural gas. In this work, the selective adsorption for N₂ and CO₂ over CH₄ on MIL-100 (M) (M=⁴ Cr, ¹⁰ Cr, ⁶ Fe, ¹ In, ¹ Sc, ³ V) is studied by density functional theory (DFT) calculations. The calculated adsorption energy of the large-size cluster model (LC) of MIL-100 (M) shows that the ⁴ MIL-100 (⁴ Cr) is the best at the refinement of natural gas due to the lower adsorption energy of CH₄ (-2.58 kJ/mol) in comparison with that of N₂ (-21.49 kJ/mol) and CO₂ (-23.82 kJ/mol). ¹ MIL-100 (¹ Sc) and ¹ MIL-100 (⁶ Fe) can also achieve selective adsorption and follows the order ⁴ MIL-100 (⁴ Cr)>¹ MIL-100 (¹ Sc)>¹ MIL-100 (⁶ Fe). In the research of the selective adsorption mechanism of MIL-100 (M) (M=⁴ Cr, ¹ Sc, ⁶ Fe), the independent gradient model (IGM) indicates that these outstanding adsorbents interact with CO₂ and N₂ mainly through the electrostatic attractive interaction, while the van der Walls interaction dominates in the interaction with CH_4. The atomic Projected Density of State (PDOS) further confirms that CH₄ contributes least to the intermolecular interaction than that of CO₂ and N₂ . Through the scrutiny of molecular orbitals, it is found that electrons transfer from the gas molecule to the metal site in the adsorption of CO₂ and N₂ . Not only does the type of the metallic orbitals, but also the delocalization of the involved orbitals determines the selective adsorption performance of MIL-100. Both Cr and Sc share their d z 2 ${{d}_{{z}^{2}}}$ orbitals with the gases, making ¹ MIL-100 (¹ Sc) another potential effective separator for CH₄ . Additionally, the comparison of adsorption energy and PDOS shows that the introduction of ligands such as benzene impedes the electron donation from gas molecules (CO₂ , N₂ ) to the metal site, indicating electron-withdrawing ligands will further favor the adsorption.

Preparation and Application of Nanozymes with Uricase-Like Activity Based on Molecularly Imprinted Polymers

Nanozymes have advantages over natural enzymes in terms of efficiency, stability, and economy. MVSM (Mixed Valence State MOF) is a nano-oxidase with uricase-like activity that may catalyze uric acid (UA) in the body into allantoin and H₂ O₂ to treat gout and hyperuricemia by substituting natural uricase. However, it cannot specifically identify and choose UA. To increase the selectivity and affinity of MVSM for UA, the composite material MVSM@MIP is innovatively synthesized using a new synthetic approach termed the "two-step synthesis method," which may prevent UA from being oxidized by MVSM during manufacture in this study. At the same time, this study also provides experimental proof of the effective creation of the material, the advantages of the "two-step synthesis approach," and the high selectivity and affinity of MVSM@MIP for UA. Based on these findings, the suggested technique may be used to effectively catalyze uric acid in human urine with high activity.

A Zn8 Double-Cavity Metallacalix[8]arene as Molecular Sieve to Realize Self-Cleaning Intramolecular Tandem Transformation of Li-S Chemistry

Toward the well-explored lithium-sulfur (Li-S) catalytic chemistry, the slow adsorption-migration-conversion kinetics of lithium polysulfides on catalytic materials and Li₂ S deposition-induced passivation of active sites limit the rapid and complete conversion of sulfur. Conceptively, molecular architectures can provide atom-precise models to understand the underlying active sites responsible for selective adsorption and conversion of LiPSs and Li₂ S₂ /Li₂ S species. Here, an octanuclear Zn(II) (Zn₈ ) cluster is presented, which features a metallacalix[8]arene with double cavities up and down the Zn₈ ring. The central Zn₈ ring and the specific double cavities with organic ligands of different electronegativity and bonding environments render active sites with variable steric hindrance and interaction toward the sulfur-borne species. An intramolecular tandem transformation mechanism is realized exclusively by Zn₈ cluster, which promotes the self-cleaning of active sites and continuous electrochemical reaction. Notably, the external azo groups and internal Zn/O sites of Zn₈ cluster in sequence stimulate the adsorption and conversion of long chain Li₂ S_x (x ≥ 4) and short chain Li₂ S/Li₂ S₂ , contributing to remarkable rate performance and cycling stability. This work pioneers the application of metallacalix[n]arene clusters with atom-precise structure in Li-S batteries, and the proposed mechanism advances the molecule-level understanding of Li-S catalytic chemistry.

Computational and Experimental Investigation of the Selective Adsorption of Indium/Iron Ions by the Epigallocatechin Gallate Monomer

Selective recovery of indium has been widely studied to improve the resource efficiency of critical metals. However, the interaction and selective adsorption mechanism of indium/iron ions with tannin-based adsorbents is still unclear and hinders further optimization of their selective adsorption performance. In this study, the epigallocatechin gallate (EGCG) monomer, which is the key functional unit of persimmon tannin, was chosen to explore the ability and mechanism of selective separation/extraction of indium from indium-iron mixture solutions. The density functional theory calculation results indicated that the deprotonated EGCG was easier to combine with indium/iron cations than those of un-deprotonated EGCG. Moreover, the interaction of the EGCG-Fe(III) complex was dominated by chelation and electrostatic interaction, while that of the EGCG-In(III) complex was controlled by electrostatic interactions and aromatic ring stacking effects. Furthermore, the calculation of binding energy verified that EGCG exhibited a stronger affinity for Fe(III) than that for In(III) and preferentially adsorbed iron ions in acidic or neutral solutions. Further experimental results were consistent with the theoretical study, which showed that the Freundlich equilibrium isotherm fit the In(III) and Fe(III) adsorption behavior very well, and the Fe(III) adsorption processes followed a pseudo-second-order model. Thermodynamics data revealed that the adsorption of In(III) and Fe(III) onto EGCG was feasible, spontaneous, and endothermic. The adsorption rate of the EGCG monomer for Fe(III) in neutral solution (1:1 mixed solution, pH = 3.0) was 45.7%, 4.3 times that of In(III) (10.7%). This study provides an in-depth understanding of the relationship between the structure of EGCG and the selective adsorption capacity at the molecular level and provides theoretical guidance for further optimization of the selective adsorption performance of structurally similar tannin-based adsorbents.

A Novel Low-Cost Bio-Sorbent Prepared from Crisp Persimmon Peel by Low-Temperature Pyrolysis for Adsorption of Organic Dyes

In order to properly reuse food waste and remove various contaminants from wastewater, the development of green, sustainable and clean technologies has demonstrated potential in the efficient inhibition of secondary pollution to the environment. In this study, an economical and green method was used to prepare biochar from crisp persimmon peel (CPP) using flash-vacuum pyrolysis at different temperatures (200–700 °C; referred to as CPP200–CPP700). CPP200 has high polarity, low aromaticity and high oxygen-containing functional groups that exhibit superior MB adsorption capabilities. CPP200 that was prepared at a relatively low temperature of 200 °C exhibited a high adsorption capacity of 59.72 mg/g toward methylene blue (MB), which was relatively higher than that for alizarin yellow R (4.05 mg/g) and neutral red (39.08 mg/g), indicating that CPP200 possesses a higher adsorption selectivity for cationic dyes. Kinetics investigation revealed that the kinetic data of CPP200 for the adsorption of MB was better fitted by a linear pseudo-second-order model. Isothermal studies indicated that the linear Langmuir model was more suitable for describing the adsorption process. The adsorption thermodynamics illustrated that the adsorption of MB onto CPP200 was spontaneous and endothermic. EDS and IR analyses of CPP200 for both pre- and post-adsorption of MB showed that electrostatic interactions between oxygen-containing groups on biochar and target MB dominated the adsorption procedure, in addition to hydrogen bonding interactions. Reusability tests confirmed the excellent regeneration characteristics of CPP200, indicating that CPP200 may be used as a green, sustainable, highly efficient and recyclable adsorbent for the selective removal of cationic organic dyes.

Highly Selective Recovery of Phosphorus from Wastewater via Capacitive Deionization Enabled by Ferrocene-polyaniline-Functionalized Carbon Nanotube Electrodes

While capacitive deionization (CDI) is a promising technology for the recovery of nutrients from wastewater, a selective recovery of phosphate from the wastewater containing high concentrations of competing ions is still a huge challenge. Herein, we reported a ferrocene-polyaniline-functionalized carbon nanotube (Fc-PANI/CNT) electrode prepared through amidation reaction and chemical oxidation polymerization, aiming for a highly selective recovery of phosphorus from wastewater. The Fc-PANI/CNT electrode with a unique structure and high conductivity could efficiently adsorb phosphate ions from complex synthetic wastewater with a nearly 100% selectivity, mainly because the integration of ferrocene and an amide bond in Fc-PANI resulted in an enhanced charge transfer (Faradaic reactions) and a strong hydrogen bonding interaction with phosphate ions in its oxidized state. Density functional theory calculations showed that the binding energies of the oxidized Fc-PANI with HPO₄^2- and H₂PO₄^- were much greater than those of the oxidized Fc-PANI with other competing anions. The affinity of Fc-PANI/CNTs with phosphate can be controlled electrochemically based on the synergetic effects of Faradaic reactions and hydrogen bonding, enabling a selective recovery of phosphate through charging/discharging cycles. The phosphate adsorption capacity reached up to 35 mg PO₄^3- g^-1 in a NaCl/Na₂SO₄/NaNO₃/NaH₂PO₄ complex mixture at 1.2 V, outperforming most of the other reported CDI systems. The Fc-PANI/CNT electrode also exhibited a decent regeneration ability and durability during repeated CDI tests, demonstrating a great potential for the application of selective recovery and enrichment of phosphate from wastewater.

Two-Photon Laser Microprinting of Highly Ordered Nanoporous Materials Based on Hexagonal Columnar Liquid Crystals

Nanoporous materials relying on supramolecular liquid crystals (LCs) are excellent candidates for size- and charge-selective membranes. However, whether they can be manufactured using printing technologies remained unexplored so far. In this work, we develop a new approach for the fabrication of ordered nanoporous microstructures based on supramolecular LCs using two-photon laser printing. In particular, we employ photo-cross-linkable hydrogen-bonded complexes, that self-assemble into columnar hexagonal (Colh) mesophases, as the base of our printable photoresist. The presence of photopolymerizable groups in the periphery of the molecules enables the printability using a laser. We demonstrate the conservation of the Colh arrangement and of the adsorptive properties of the materials after laser microprinting, which highlights the potential of the approach for the fabrication of functional nanoporous structures with a defined geometry. This first example of printable Colh LC should open new opportunities for the fabrication of functional porous microdevices with potential application in catalysis, filtration, separation, or molecular recognition.

Easy, Fast, Selective, and Simultaneous Separation of Hg(II) and Oil via Loofah-Sponge-Inspired Hierarchically Porous Membranes

In this work, Cu2Se/Cu membranes (CSMs) of hierarchical pores were fabricated via chemical dissolution of Cu and Se followed by redeposition of cuprous selenide (Cu2Se) on copper membranes (CMs), and applied for adsorption/removal/separation of Hg(II) among a variety of interfering metal ions. The CSM demonstrates the best comprehensive performance among previous Hg(II) adsorption membranes, having high selectivity (KHg/M = 2.9 × 104-3.0 × 105), high efficiency (>99%, 5 s to 3 min), high adsorption capacity (505 mg/g), and high flux (2.0 × 106 L m-2 h-1). Meanwhile, effects of Hg(II) concentration, flow rate, and the number of membrane layers and adsorption cycles were also investigated on the removal of Hg(II). Moreover, a Cu2Se/Cu membrane-plasma (CSM-p) with superhydrophilicity/underwater superoleophobicity was prepared on the basis of CSM, and simultaneous removal of Hg(II) and oil was realized by using CSM and CSM-p in combination. This work not only provides a new reference for design of highly selective, efficient metal ion adsorption/enrichment/separation materials but also presents a novel approach to the removal/enrichment/separation of multiple complex contaminants by the combination of different functional membranes.

Highly efficient and selective capture Pb(II) through a novel metal-organic framework containing bifunctional groups

The design and development of materials with a selective adsorption capacity for Pb(II) are very important for environmental governance and ecological safety. In this work, a novel 3D metal-organic framework ([Cd₂H₄L₄Cl₂SO₄]·4H₂O, Cd-MOF) is constructed using a multiple pyrazole heterocycles tetraphenylethylene-based ligand (H₄L₄) and CdSO₄ which containing Pb(II) adsorption sites (SO₄^2-). Studies have shown that the Cd-MOF has outstanding stability, and its maximum adsorption value of Pb(II) can be as high as 845.55 mg/g, which is higher than that of most MOFs or MOFs modified materials. It is worth emphasizing that the Cd-MOF have excellent recyclability due to the unique adsorption mechanism of the Cd-MOF. Thermodynamic studies have shown that Pb(II) adsorption of the Cd-MOF is a spontaneous endothermic process. Specific selective adsorption, exceptional stability and remarkable recyclability make the Cd-MOF a potential material for industrial capture and recovery of Pb(II) from water.

Selective adsorption and separation of Cr(VI) by surface-imprinted microsphere based on thiosemicarbazide-functionalized sodium alginate

Cr(VI)-imprinting thiosemicarbazide-functionalized sodium alginate (IIPTSC@SA) microspheres were fabricated to achieve the good selective adsorption for Cr(VI) removal from aqueous solution containing multiple ions. The selective adsorption and reusability of IIPTSC@SA microsphere were intensively investigated. The results showed that the grafting conditions of thiosemicarbazide were optimized at 0.2 g of TSC at 60 °C for 5 h and the ion-imprinting conditions at 100 mL of 2 wt % glutaraldehyde at 60 °C for 6 h. IIPTSC@SA microspheres exhibited the maximum adsorption capacity of 252.5 mg/g and good selectivity to remove Cr(VI) from multi-ion coexisting water. The adsorption process complied with a monolayer adsorption by virtue of chemical interactions together with endothermic spontaneously. After eight adsorption-desorption, the adsorption capacity and selectivity of IIPTSC@SA microspheres remained relatively stable.

A Novel Graphite-Based Sorbent for Oil Spill Cleanup

The performance of an innovative material based on expanded graphite, Grafysorber^® G+ (Directa Plus), has been tested through laboratory, tank, and confinement tests for oil removal in case of an oil spill and water treatment. In addition to the ability to retain oil, the possibility of reusing this material after regeneration via squeezing was also evaluated. As a comparison, the same experimental tests were conducted using polypropylene flakes (PP), the material currently most used to deal with spill accidents. Oils with different chemical and physical properties were used, namely kerosene, diesel, and crude oil. From the laboratory tests, the capacity of Grafysorber^® G+ to retain oil was found to be directly proportional to the viscosity of the latter, with adsorption values ranging from 76.8 g/g for diesel to 50.8 g/g for kerosene, confirming the potential of the innovative material compared to the PP. Cyclical use tests have confirmed certain reusability of the material, even if its adsorbent capacity decreases significantly after the first cycle and continues to decrease in subsequent cycles, but a less marked manner. Finally, some considerations based on the adsorption capacities were found to suggest that the adoption of the new material is also economically preferable, resulting in savings of 20 to 40% per kg of hydrocarbon treated.

The Effect of Oleic Acid Emulsification using SPE on Fluorite and Dolomite Flotation

Collector OA, oleic acid, is widely used industrially for fluorite flotation. Low selectivity, dispersibility and collecting capability of the OA collector are always observed. In this study, compared with flotation of dolomite, a collector mixture of OA and SPE (styrylphenol polyoxyethylene ether) demonstrated significantly better performances for the fluorite. An optimal mass ratio 4 : 1 OA : SPE was found, and the recovery of fluorite was increased from over 85 % to more than 94 % compared with pure OA. Furthermore, the dosage of the collector agent was reduced from 50  mg mL⁻¹ to 20 mg mL⁻¹, which did not negatively impact the recovery of dolomite. The results from the contact angle tests indicated that SPE selectively increased the surface hydrophobicity of fluorite but had little effect on dolomite. Besides, zeta potential measurements and IR analyses revealed that the addition of SPE led to strong chemical adsorption on the surface of fluorite, resulting in a significant difference in the flotation performances of the two minerals. Therefore, SPE‐emulsified OA is corroborated to prompt more selectivity and collecting capability on flotation of fluorite over dolomite.

Crown Ether Grafted Graphene Oxide/Chitosan/Polyvinyl Alcohol Nanofiber Membrane for Highly Selective Adsorption and Separation of Lithium Ion

Nanofiber membranes were successfully prepared with crown ether (CE) functionalized graphene oxide (GO), chitosan (CS), and polyvinyl alcohol (PVA) by low-temperature thermally induced liquid-liquid phase separation. The physical and chemical properties and adsorption performance of nanofiber membrane were studied through SEM, FT-IR, XRD, and static adsorption experiments. The results show that the specific surface area of the nanofiber membrane is as high as 101.5 m2∙g-1. The results of static adsorption experiments show that the maximum adsorption capacity of the nanofiber membrane can reach 168.50 mg∙g-1 when the pH is 7.0. In the selective adsorption experiment, the nanofiber membrane showed high selectivity for Li+ in salt lake brine. After five cycles, the material still retains 88.31% of the adsorption capacity. Therefore, it is proved that the material has good regeneration ability.

Crown-Ether-Modified SBA-15 for the Adsorption of Cr(VI) and Zn(II) from Water

Recently, the release of some metal ions to the environment has been observed to cause serious damages to human health and the environment. Herein, a chromium(VI)- and zinc(II)-selective adsorbent (CB18crown6/SBA-15) was successfully fabricated through the covalent attachment of 4′-carboxybenzo-18-crown-6 (CB18crown6) as a ligand on mesoporous silica support (SBA-15). The CB18crown6/SBA-15 adsorbent was characterized by Fourier-transform infrared (FTIR) spectrometry, X-ray diffraction (XRD), N₂ adsorption–desorption, thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). To evaluate its ability to selectively capture Cr(VI) and Zn(II), adsorption experiments were conducted. The influences of pH, initial concentration of metal ions, and coexisting metal ions on the adsorption process were examined. The CB18crown6/SBA-15 selectively adsorbed Cr(VI) at pH 2 and Zn(II) at pH 5, respectively, from the mixed aqueous solutions of chromium, zinc, lithium, cadmium, cobalt, strontium, and cesium ions. The data for the adsorption of Cr(VI) onto the CB18crown6/SBA-15 were well explained by the Langmuir adsorption isotherm. In addition, the recycling and reuse of CB18crown6/SBA-15 was successfully achieved, and 71 and 76% reuse efficiency of Cr(VI) and Zn(II), respectively, was obtained after five cycles. This study suggests that the use of the CB18crown6/SBA-15 can be a feasible approach for the selective remediation of Cr(VI) and Zn(II) contamination.

Effects of Electronegativity and Hydration Energy on the Selective Adsorption of Heavy Metal Ions by Synthetic NaX Zeolite

The adsorption capacity of synthetic NaX zeolite for Pb²⁺, Cd²⁺, Cu²⁺ and Zn²⁺ in single and multi-component systems were investigated. The effects of electronegativity and hydration energy on the selective adsorption, as well as potential selective adsorption mechanism of the NaX zeolite for Pb²⁺, Cd²⁺, Cu²⁺ and Zn²⁺ were also discussed. The maximum adsorption capacity order of the heavy metals in the single system was Pb²⁺ > Cd²⁺ > Cu²⁺ > Zn²⁺, and this could be related to their hydration energy and electronegativity. The values of the separation factors (α) and affinity constant (K_EL) in different binary systems indicated that Pb²⁺ was preferentially adsorbed, and Zn²⁺ presented the lowest affinity for NaX zeolite. The selective adsorption capacities of the metals were in the order, Pb²⁺ > Cd²⁺ ≈ Cu²⁺ > Zn²⁺. The trend for the selective adsorption of NaX zeolite in ternary and quaternary systems was consistent with that in the binary systems. Pb²⁺ and Cu²⁺ reduced the stability of the Si-O-Al bonds and the double six-membered rings in the NaX framework, due to the high electronegativity of Pb²⁺ and Cu²⁺ than that of Al³⁺. The selective adsorption mechanism of NaX zeolite for the high electronegative metal ions could mainly result from the negatively charged O in the Si-O-Al structure of the NaX zeolite, hence heavy metal ions with high electronegativity display a strong affinity for the electron cloud of the oxygen atoms in the Si-O-Al. This study could evaluate the application and efficiency of zeolite in separating and recovering certain metal ions from industrial wastewater.

3D Thioether-Based Covalent Organic Frameworks for Selective and Efficient Mercury Removal

Developing functionalized 3D covalent organic frameworks (3D COFs) is critical to broaden their potential applications. However, the introduction of specific functionality in 3D COFs remains a great challenge because most of the functional groups are not compatible with the synthesis conditions. Herein, for the first time 3D thioether-based COFs (JUC-570 and JUC-571) for mercury (Hg²⁺ ) removal from aqueous solution is reported. These 3D thioether-based COFs prepared by the bottom-up approach display high Hg²⁺ uptakes (972 mg g^-1 for JUC-570 and 970 mg g^-1 for JUC-571 at pH = 5), fast adsorption kinetics (distribution coefficient K_d value of 2.29 × 10⁷  mL g^-1 for JUC-570 and 2.07 × 10⁷  mL g^-1 for JUC-571), and favorable selectivity. In particular, JUC-570 is periodically decorated with isopropyl groups around imine bonds that markedly improve its chemical stability and effectively prevent the pore collapse, and thus endows high Hg²⁺ adsorption capacity (619 mg g^-1 ) and excellent cycle performance even at pH = 1. This study not only puts forward a new route to construct stable functionalized 3D COFs, but also promotes their potential applications in areas related to the environment.

Inherent Ethyl Acetate Selectivity in a Trianglimine Molecular Solid

Ethyl acetate is an important chemical raw material and solvent. It is also a key volatile organic compound in the brewing industry and a marker for lung cancer. Materials that are highly selective toward ethyl acetate are needed for its separation and detection. Here, we report a trianglimine macrocycle (TAMC) that selectively adsorbs ethyl acetate by forming a solvate. Crystal structure prediction showed this to be the lowest energy solvate structure available. This solvate leaves a metastable, “templated” cavity after solvent removal. Adsorption and breakthrough experiments confirmed that TAMC has adequate adsorption kinetics to separate ethyl acetate from azeotropic mixtures with ethanol, which is a challenging and energy‐intensive industrial separation.

Hierarchically Porous Organic Cages

Imparting mesopores to organic cages of an intrinsic microporous nature to build up hierarchically porous cage soft materials is a grand challenge and will reshape the property and application scope of traditional organic cage molecules. Herein, we discovered how to engineer mesopores into microporous organic cages via their host-guest interactions with long chain ionic surfactants. Equally important, the ionic head of surfactants equips the supramolecularly assembled porous structures with charge-selective uptake and release function in solution. Interestingly, such hierarchically porous organic cage can serve as a nanoreactor once trapping enzymes within the cavity, which show 5-fold enhanced activity of enzymatic catalysis when compared with the free enzymes.

An Unprecedented Pillar-Cage Fluorinated Hybrid Porous Framework with Highly Efficient Acetylene Storage and Separation

Despite much intense investigation on the C₂ H₂ /CO₂ separation, the trade-off between the adsorption capacity and separation selectivity is still tricky. To overcome the dilemma, we have rationally synthesized an ultra-stable fluorinated hybrid porous material SIFSIX-Cu-TPA with the ith-d topology. Completely differing from the famous pillar-layer fluorinated materials, SIFSIX-Cu-TPA possesses a unique pillar-cage structure, in which the SiF₆ ^2- anions cross-link two adjacent metal nodes as pillars to stabilize the three-dimensional framework constructed by icosahedral and tetrahedral cages. As anticipated, SIFSIX-Cu-TPA has high BET surface area (1330 m²  g^-1 ) as well as high C₂ H₂ uptake (185 cm³  g^-1 at 298 K and 1 bar). At the same time, due to the obvious difference in the adsorption performance of CO₂ and C₂ H₂ especially in the low pressure area, SIFSIX-Cu-TPA also exhibits an excellent C₂ H₂ /CO₂ separation performance (breakthrough time up to 68 min g^-1 at 298 K and 1 bar).

Development of a New Electrochemical Sensor Based on Mag-MIP Selective Toward Amoxicillin in Different Samples

This work describes an electrochemical sensor for the selective recognition and quantification of amoxicillin and a β-lactam antibiotic in real samples. This sensor consists of a carbon paste electrode (CPE) modified with mag-MIP (magnetic molecularly imprinted polymer), which was prepared by precipitation method via free radical using acrylamide (AAm) as functional monomer, N,N'-methylenebisacrylamide (MBAA) as a crosslinker, and potassium persulfate (KPS) as initiator, to functionalized magnetic nanoparticles. The magnetic non-imprinted polymers (mag-NIP) were prepared using the same experimental procedure without analyte and used for the preparation of a CPE for comparative studies. The morphological, structural, and electrochemical characteristics of the nanostructured material were evaluated using Field emission gun scanning electron microscopy (FEG-SEM), Transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), Vibrating sample magnetometry (VSM), X-ray diffraction (XRD), and voltammetric technique. Electrochemical experiments performed by square wave voltammetry show that the mag-MIP/CPE sensor had a better signal response compared to the non-imprinted polymer-modified electrode (mag-NIP/CPE). The sensor showed a linear range from 2.5 to 57 μmol L^-1 of amoxicillin (r ² = 0.9964), with a limit of detection and a limit of quantification of 0.75 and 2.48 μmol L^-1, respectively. No significant interference in the electrochemical signal of amoxicillin was observed during the testing experiments in real samples (skimmed milk and river water). The proposed mag-MIP/CPE sensor could be used as a good alternative method to confront other techniques to determine amoxicillin in different samples.

Molecular Level Design of Nitrogen-Doped Well-Defined Microporous Carbon Spheres for Selective Adsorption and Electrocatalysis

Nitrogen-doped porous carbon spheres have attracted great interest in diversified fields owing to their unique physical and chemical properties. However, the synthesis of nitrogen-doped porous carbon spheres with hierarchical superstructures and refined micropore structures is still a challenge. Herein, we develop a molecular-scale silica templating strategy to prepare nitrogen-doped microporous carbon spheres (MCSSs) with high porosity and a well-defined micropore structure. Octa(aminophenyl) polyhedral oligomeric silsesquioxane is used as a building block in MCSS precursors to provide precise molecular-scale templating and nitrogen doping. The morphology of MCSSs can be easily tuned by choosing the proper solvent. The as-synthesized MCSS with a large surface area (2036 m² g^-1), narrow micropore size distribution, nitrogen doping, and hierarchical geometry can serve as an efficient selective adsorbent for CO₂ and organic pollutants. Furthermore, the MCSS decorated with Fe-N-C active sites (MCSS-Fe) shows enhanced electrocatalytic ORR activity in alkaline solution. This novel approach may open a new avenue for controllable fabrication of porous carbon spheres with desired geometry and well-designed pore structure and show potential applications in selective adsorption and catalysis.

Polyurethane Foams Loaded with Carbon Nanofibers for Oil Spill Recovery: Mechanical Properties under Fatigue Conditions and Selective Absorption in Oil/Water Mixtures

Marine pollution due to spillage of hydrocarbons represents a well-known current environmental problem. In order to recover the otherwise wasted oils and to prevent pollution damage, polyurethane foams are considered suitable materials for their ability to separate oils from sea-water and for their reusability. In this work we studied polyurethane foams filled with carbon nanofibers, in varying amounts, aimed at enhancing the selectivity of the material towards the oils and at improving the mechanical durability of the foam. Polyurethane-based foams were experimentally characterized by morphological, surface, and mechanical analyses (optical microscopy observation, contact angle measurement, absorption test according to ASTM F726-99 standard and compression fatigue tests according to ISO 24999 standard). Results indicated an increase in hydrophobic behavior and a good oleophilic character of the composite sponges besides an improved selective absorption of the foam toward oils in mixed water/oil media. The optimal filler amount was found to be around 1 wt% for the homogeneous distribution inside the polymeric foam. Finally, the fatigue test results showed an improvement of the mechanical properties of the foam with the growing carbon filler amount.

[Heavy Metal Ion Adsorption Properties and Stability of Amine-sulfur Modified Biochar in Aqueous Solution]

A novel biochar was prepared by modification with corn straw, ethylene triamine, and carbon disulfide, and its adsorption properties and stability with respect to heavy metal ions in single and mixed systems (Pb²⁺, Ni²⁺, and Cd²⁺) were investigated. Characterization analysis confirmed the successful modification of an amine-sulfur double group on the surface of the biochar, which had abundant functional groups with a large specific surface area. Adsorption experiments under the single system indicated that the adsorption equilibrium time was 4 h and the optimum dosages were 1, 0.8, and 1.2 g·L^-1. The adsorption met the conditions of the quasi-second-order kinetic equation. Under the ternary system, the adsorption equilibrium time was reduced to 1.5 h, the optimum dosages were 0.4, 1.6, and 0.8 g·L^-1, and the adsorption sequence was Pb²⁺ > Cd²⁺ > Ni²⁺. The total amount of adsorption was 0.67 mmol·g^-1, which was higher than that of single heavy metal ions, indicating that amine-sulfur modified straw biochar (BC-SN) has an improved treatment effect on polluted water under the coexistence of three heavy metal ions. The Pb²⁺ and Cd²⁺ adsorbed by the biochar was stably bound in the form of heavy metal sulfide and a chelated amino group. In contrast, the adsorption of Ni²⁺ was via the mixed adsorption of various functional groups. When Pb²⁺ and Cd²⁺ compete for adsorption, the binding energy is higher and adsorption stability is more reliable.

A novel molecular imprinting polymer for the selective adsorption of D-arabinitol from spiked urine

In this research, molecular imprinting polymers (MIPs) for D-arabinitol were synthesized using a bulk polymerization method through a noncovalent approach. The MIPs were prepared by using D-arabinitol as a template, acrylamide as a functional monomer, ethylene glycol dimethacrylateas cross-linker, benzoyl peroxide as an initiator and dimethyl sulfoxideas a porogen. MIPS was synthesized in several formulas with a different molar ratio of template to functional monomers and cross-linker. Fourier-transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM) were used to characterize the MIPs produced. A batch rebinding assay was used to test the binding efficiency of each formula. Batch rebinding test results revealed that MIPsF3 with a molar ratio of the template: monomer and crosslinker ratio respectively (1: 4: 25) had the highest binding capacity at 1.56 mgg ^-1 . The results of isotherm adsorption showed that the MIPs produced followed the Freundlich equation with an R-value of 0.97. The MIPs produced was also selective toward its isomeric compounds (i.e. L-arabinitol, adonitol, xylitol, and glucose). The extraction efficiency of the MIPs against D-arabinitol was 88.98%.

Chain Entanglement of 2-Ethylhexyl Hydrogen-2-Ethylhexylphosphonate into Methacrylate-Grafted Nonwoven Fabrics for Applications in Separation and Recovery of Dy (III) and Nd (III) from Aqueous Solution

A nonwoven fabric adsorbent loaded with 2-ethylhexyl hydrogen-2-ethylhexylphosphonate (EHEP) was developed for the separation and recovery of dysprosium (Dy) and neodymium (Nd) from an aqueous solution. The adsorbent was prepared by the radiation-induced graft polymerization of a methacrylate monomer with a long alkyl chain onto a nonwoven fabric and the subsequent loading of EHEP by hydrophobic interaction and chain entanglement between the alkyl chains. The adsorbent was evaluated by batch and column tests with a Dy (III) and Nd (III) aqueous solution. In the batch tests, the adsorbent showed high Dy (III) adsorptivity close to 25.0 mg/g but low Nd (III) adsorptivity below 1.0 mg/g, indicating that the adsorbent had high selective adsorption. In particular, the octadecyl methacrylate (OMA)-adsorbent showed adsorption stability in repeated tests. In the column tests, the OMA-adsorbent was also stable and showed high Dy (III) adsorptivity and high selectivity in repeated adsorption-elution circle tests. This result suggested that the OMA-adsorbent may be a promising adsorbent for the separation and recovery of Dy (III) and Nd (III) ions.

Design, Fabrication, and Analysis of a Capillary Diode for Potential Application in Water-Oil Separation

A capillary device is designed and fabricated in glass to work as a fluidic diode with vanishingly small hydrodynamic conductance for imbibition of water within a finite range of immersion depths. This is attained through patterning a section of predefined length on the device surfaces using a single-step laser-based ablation process and without resorting to chemical treatment of the hydrophilic glass substrate. While the studied device works as a fluidic diode for water, it can behave as a conventional capillary slit for the imbibition of oils (e.g., alkanes, silicone oils) with low surface tension. A prototype device with simple geometric design is demonstrated for selective adsorption and separation of water and oil in vertical imbibition experiments at controlled immersion depths. Efficient devices for passive separation of water and oil can be designed based on the demonstrated physical mechanism and the analytical model proposed in this work.

Ultrafine SnO2/010 Facet-Exposed BiVO4 Nanocomposites as Efficient Photoanodes for Controllable Conversion of 2,4-Dichlorophenol via a Preferential Dechlorination Path

It is a great challenge for achieving efficiently controllable conversion of chlorinated organics through BiVO₄-based photoelectrochemical methods by improving the selective adsorption of such organics and charge separation. Herein, we have successfully fabricated SnO₂/010 facet-exposed BiVO₄ nanocomposites by a series of hydrothermal processes and further used as efficient photoanodes. The resulting photoanode exhibits about 6.3 times higher photoelectrochemical activity than bulk-BiVO₄, especially with the efficiently controllable conversion of 2,4-dichlorophenol (2,4-DCP) to the nontoxic valuable intermediates such as catechol and pyrogallol by preferential dechlorination. Based on the 2,4-DCP adsorption curves, in situ diffuse reflectance infrared spectra, transient-state surface photovoltage responses, and photocurrent action spectra, it was clearly confirmed that the exceptional performance could be mainly attributed to the promoted selective adsorption of 2,4-DCP for efficiently modulating holes by the strong coordination interactions between -Cl with lone-pair electrons in 2,4-DCP and Bi- with empty orbits on (010) facet-exposed BiVO₄ nanoflakes and to the coupled nano-SnO₂ for prolonging the charge lifetime of BiVO₄ by acting as the high-energy-level electron-accepting platform. This work provides a feasible strategy to develop excellent BiVO₄-based photoelectrochemical methods for efficiently controlling the conversion of chlorinated organics simultaneously with energy production and recovery.

Impact of the Preparation Procedure on the Performance of the Microporous HKUST-1 Metal-Organic Framework in the Liquid-Phase Separation of Aromatic Compounds

To date, metal-organic frameworks (MOFs) have been recognized as promising solid phases in high-performance liquid chromatography (HPLC). This research aimed to elucidate the role of the physico-chemical characteristics of the microporous HKUST-1 metal-organic framework in its operation as a selective adsorbent in HPLC. For this, the HKUST-1 samples were prepared by microwave-assisted synthesis and a solvothermal procedure. According to the chromatographic examinations, the HKUST-1 material synthesized in the microwave fields shows an efficient performance in the selective adsorption of aromatic compounds with different functionalities. This study revealed a significant impact of the preparation procedure on the mechanism of the liquid-phase adsorption on the HKUST adsorbents under conditions of the HPLC. An effect of the elution solvent with the different coordination ability to the Cu²⁺ sites in the HKUST-1 structure on the adsorption selectivity was observed.

Fibrous Materials Based on Polymeric Salicyl Active Esters as Efficient Adsorbents for Selective Removal of Anionic Dye

To increase the performance efficiency and decrease the costs for organic dye wastewater purification, two fibrous adsorbents based on polymeric salicyl active esters were developed by means of a simple two-step approach. For the first time, salicyl-based active ester polymers were electrospun into fibrous membranes and subsequently postmodified with the desired functional groups under simple and mild reaction conditions. The morphology of the produced fibrous adsorbents was characterized by scanning electron microscopy (SEM), the surface properties were analyzed by nitrogen adsorption/desorption isotherms and contact angle measurements, and the completeness of the postmodification process was determined by Fourier transform infrared (FTIR) and elemental analyses. The adsorbents were further tested for their adsorption and selectivity performance of different organic dyes as well as for their recyclability. To explore the adsorption mechanism, four kinetic models and three isotherm models were used to analyze the adsorption data. The results indicated that the fibrous adsorbents showed an extremely high adsorption capacity for the anionic dye methyl blue. The fibrous adsorbents were also able to selectively adsorb anionic dyes from a mixture of anionic and cationic dyes, and they could be recycled at least 10 times. The simple and cost-efficient development process of these fibrous adsorbents and their excellent performance make them promising materials for further research and application in the area of water treatment.

Dual use of colorimetric sensor and selective copper removal from aqueous media with novel p(HEMA-co-TACYC) hydrogels: Cyclen derivative as both monomer and crosslinker

Within the scope of this study, p(2-hydroxyethyl methacrylate-co-tetraacrylic cyclen) (p(HEMA-co-TACYC)) hydrogels were synthesized for the first time in the literature using a tetraacrylic cyclen (TACYC) as both functional monomer and crosslinker. The hydrogels designed especially for Cu²⁺ ions showed colorimetric sensor behavior selective for Cu²⁺ ions in all aqueous media (deionized, tap, river and sea water) and in metal ion mixtures. The p(HEMA-co-TACYC) hydrogels forming a stable complex with Cu²⁺ ions simultaneously showed properties of being a good adsorbent material. The hydrogels have reuse capacity as both sensor and adsorbent material. Changing the amount of TACYC in the hydrogel structure changes the maximum adsorption capacity for Cu²⁺ ions. The Langmuir and Freundlich adsorption constants for Cu²⁺ ion adsorption of the hydrogels, acting as selective adsorbent in all aqueous media and metal ion mixtures, were determined.

Selective Dye Adsorption by Zeolitic Imidazolate Framework-8 Loaded UiO-66-NH2

In this study, Zeolitic Imidazolate Framework-8 (ZIF-8)-loaded UiO-66-NH₂ was synthesized, characterized, and analyzed for its potential to efficiently remove dyes. The selective adsorption on ZIF-8-loaded UiO-66-NH₂ or its parent MOFs (UiO-66-NH₂ and ZIF-8) in the mixed dyes solution was explored, including anionic dye (methyl orange (MO)) and cationic dyes (methylene blue (MB) and rhodamine B (RhB)). ZIF-8-loaded UiO-66-NH₂ displayed much better selectivity to MB than its parent MOFs. Adsorption capacity of ZIF-8-loaded UiO-66-NH₂ (173 mg/g) toward MB was found to be 215% higher than UiO-66-NH₂ (55 mg/g). A kinetics study based on adsorption data demonstrated that the adsorption process most closely matched with the model of pseudo-second-order kinetic and Langmuir isotherm. The adsorption was an exothermic and spontaneous physical process as revealed by the values of thermodynamic parameters. Furthermore, reusability of ZIF-8-loaded UiO-66-NH₂ was investigated and revealed the significant regeneration efficiency in adsorption capacity for MB even after four adsorption cycles. Experimental results proved that the interaction between ZIF-8-loaded UiO-66-NH₂ and MB was mainly affected by the mechanism, for instance, electrostatic interaction as well as π–π stacking interactions.