Dosimetry of inhaled elongate mineral particles in the respiratory tract: The impact of shape factor

Ferrocene-derived magnetic fiber-particles from diesel exhaust: enhanced pulmonary toxicity via Bach1-SAT1-polyamine depletion

BACKGROUND AND AIM

Magnetic nanoparticles are key components of air pollution. The combustion of diesel engine fuels, especially with ferrocene doping to reduce emissions, may increase exposure to these particles and related health risks. This study aimed to reveal the generation and characterization of ferrocene-derived magnetic particles (FMP) in ferrocene-doped diesel exhaust, and to investigate its toxicities and associated mechanisms in an avian model.

METHODS

FMP was observed in ferrocene-doped diesel exhaust particles, and extracted with neodymium magnets. Extracted FMP was characterized, and exposed to hatchling chickens via aerosol inhalation. Pulmonary toxicities were assessed with pathological and molecular methods. Associated mechanisms were investigated with RNA-seq, in vitro cell culture, and in vivo gene silencing.

RESULTS

FMP was characterized to be fibrous, magnetic iron-containing carbon particles. Extracted FMP could directly induce pulmonary toxicity. Mechanistic investigations revealed molecular mechanism associated with ferroptosis via Bach1, SAT1 and polyamines depletion, and further confirmed with ferroptosis inhibitor treatment, Bach1 inhibitor treatment, supplementation of polyamines or SAT1 silencing.

CONCLUSIONS

Ferrocene doping could result in formation of magnetic particles in diesel exhaust. For the first time, magnetic fiber-like particles were extracted from ferrocene-doped DE particles, which is a potential source of magnetic particles in air pollution. To better balance emission control and health effects, further investigations are necessary.

Naturally occurring asbestos in Southern Italy: Geological and mineralogical investigation of fibrous antigorite from Calabrian serpentinites in view of its hazard assessment

In the last few decades, non-occupational asbestos-related diseases have been documented in populations living near naturally occurring asbestos (NOA) sites, including regions in Greece, Cyprus, China, New Caledonia, Turkey, and Italy. This highlights the critical need to assess geological and environmental hazards associated with NOA. Fibrous antigorite, among the >400 naturally occurring fibrous minerals, has emerged as a potential health and environmental hazard. This work examines the morphometrical, mineralogical and surface properties of a fibrous antigorite vein from a serpentinite body at San Mango D'Aquino (Calabria, Italy), relevant to assessing its potential toxicity. The geological site, described through field and petrographic analyses, was selected as representative of serpentinites outcropping over a large area in central Calabria. Results on the morphometric variation induced by a standardized mechanical stress, mineral solubility, and surface chemical reactivity indicated that: i) the fibrous morphology, expressed as % of WHO (World Health Organization) fibres, was largely preserved and consistent with asbestos standards; ii) antigorite fibres have a durability higher than chrysotile and close to a previously characterized fibrous antigorite from Val Varenna, Italy; iii) fibres showed a remarkable redox reactivity, even higher than chrysotile, suggesting that they may promote particle-derived radical imbalance in vitro and in vivo. Our findings revealed that the antigorite fibres from San Mango possess several critical properties commonly associated with asbestos toxicity. On this basis, we identify the NOA site of San Mango as a potential emission source of hazardous antigorite fibres, with significant environmental and public health implications for the surrounding communities.

Mesothelioma risks and cumulative exposure to elongate mineral particles of various sizes in Minnesota taconite mining industry

OBJECTIVES

An excess of mesothelioma has been previously observed in iron ore miners in Northeastern Minnesota. This study explored the potential association between mesothelioma and elongate mineral particle (EMP) exposures in the Minnesota taconite mining industry, examining both regulated and non-regulated EMP dimensions.

METHODS

A nested case-control study design within the Mineral Resources Health Assessment Programme cohort analysed 104 mesothelioma cases and 410 controls. Cumulative EMP exposures were assessed across various dimensional definitions, including regulated (National Institute for Occupational Safety and Health, NIOSH) and non-regulated EMPs. Conditional logistic regression models were applied to estimate mesothelioma risk linked to employment duration and cumulative EMP exposure while adjusting for potential confounding variables.

RESULTS

Consistent with earlier assessments, mesothelioma was associated with the number of years employed in the taconite industry (rate ratio (RR) 1.02, 95% CI 1.00 to 1.05) and cumulative NIOSH EMP exposure ((EMP/cc)×years) in taconite mining and processing (RR 1.20, 95% CI 0.99 to 1.46). Positive associations were also observed with mesothelioma and cumulative exposure to non-regulated EMPs.

CONCLUSIONS

This study supported the main conclusions in the previous study that the data were consistent with an association between mesothelioma and employment duration and with NIOSH EMP exposure in taconite mining and processing. However, the 95% CI indicates the data are also compatible with a null effect. Given the limitations we cite in the manuscript, additional study is needed to clarify the effect. Additionally, this study found possible evidence of a positive association between mesothelioma and cumulative exposure to Chatfield EMP, Suzuki EMP and Cleavage Fragments in the Minnesota taconite worker population.

A risk assessment of mechanics who changed chrysotile asbestos containing brakes and other vehicle components in the 1950s-early 2000s era: an update on the 2004 evaluation

For the past 50 years, there has been an ongoing interest in understanding the potential health hazards, if any, to vehicle mechanics who worked with asbestos-containing brakes in the 1950s-early 2000s era. Two reviews have been published on this topic, one by Langer (2003) ("Reduction of the biological potential of chrysotile asbestos arising from conditions of service on brake pads") and another by Paustenbach, et al. (2004) ("Environmental and occupational health hazards associated with the presence of asbestos in brake linings and pads (1900 to present): a 'state-of-the-art' review"). This analysis is an update on those papers since a considerable amount of research has been published over the past 20 years on this topic. The following important aspects are addressed in this review: new information on the toxicology of chrysotile, toxicology studies of brake dust associated with grinding, additional epidemiology studies and meta-analyses published on auto mechanics of the era, previously unfound data on how brakes (during the era when chrysotile was used) were manufactured, and new work describing the transformation of chrysotile to various degradation products during vehicle braking. This update also addresses questions about the health hazards associated with asbestos in vehicle clutches, transmissions, and gaskets. The exposure data indicate that the airborne concentrations of chrysotile fibers associated with vehicle mechanic work when asbestos was in auto brakes were, on average, less than 0.04 f/cm3 (8-h TWA) and the average lifetime cumulative dose was in the vicinity of 0.5-3 f/cm3-year for mechanics of that era. Although many of these fibers may have no toxicity due to thermal degradation and the conversion to degradation products, 31 epidemiology studies have evaluated the risks of mesothelioma for vehicle mechanics of this era and all but one indicate that there was no increased incidence of this disease in these workers. The weight of evidence continues to indicate that the asbestos-related health risks to vehicle mechanics from asbestos-containing components were de minimis. The risks associated with take-home and bystander exposure of a mechanic were also addressed and they were found to pose a de minimis or zero health risk to those potentially exposed. Based on our evaluation, there is no indication that asbestos from asbestiform tremolite was present at detectable concentrations in bulk samples of brakes or in the air during brake work. The recent U.S. Environmental Protection Agency (EPA) risk assessment of 2024 on chrysotile and their views of the hazards of asbestos-containing brakes were discussed. Their analyses did not alter our views that exposures to mechanics posed no increased risk of asbestos related disease. The latest knowledge about the role of genetic susceptibility on the development of mesothelioma is also addressed.

Methodological steps forward in toxicological in vitro screening of mineral wools in primary rat alveolar macrophages and normal rat mesothelial NRM2 cells

Man-made vitreous fibers (MMVF) comprise diverse materials for thermal and acoustic insulation, including stone wool. Depending on dimension, durability, and dose, MMVF might induce adverse health effects. Therefore, early predictive in vitro (geno)toxicity screening of new MMVF is highly desired to ensure safety for exposed workers and consumers. Here, we investigated, as a starting point, critical in vitro screening determinants and pitfalls using primary rat alveolar macrophages (AM) and normal rat mesothelial cells (NRM2). A stone wool fiber (RIF56008) served as an exemplary MMVF (fibrous vs. ground to estimate impact of fiber shape) and long amosite (asbestos) as insoluble fiber reference. Materials were comprehensively characterized, and in vivo-relevant in vitro concentrations defined, based on different approaches (low to supposed overload: 0.5, 5 and 50 µg/cm2). After 4-48 h of incubation, certain readouts were analyzed and material uptake was investigated by light and fluorescence-coupled darkfield microscopy. DNA-strand break induction was not morphology-dependent and nearly absent in both cell types. However, NRM2 demonstrated material-, morphology- and concentration-dependent membrane damage, CINC-1 release, reduction in cell count, and induction of binucleated cells (asbestos > RIF56008 > RIF56008 ground). In contrast to NRM2, asbestos was nearly inactive in AM, with CINC-1 release solely induced by RIF56008. In conclusion, to define an MMVF-adapted, predictive in vitro (geno)toxicity screening tool, references, endpoints, and concentrations should be carefully chosen, based on in vivo relevance, and sensitivity and specificity of the chosen cell model. Next, further endpoints should be evaluated, ideally with validation by in vivo data regarding their predictivity.

The fate of airborne microfibers in the human respiratory tract in different microenvironments

Αirborne microplastics (MPs) are considered an important exposure hazard to humans, especially in the indoor environment. Deposition and clearance of MPs in the human respiratory tract (HRT) was investigated using the ExDoM2 dosimetry model, modified to incorporate the deposition and clearance of MPs fibers. Fiber deposition was calculated via the fiber equivalent aerodynamic diameter determined using their properties such as size, density and dynamic shape factor. Scenario simulations were performed for elongated particles of cylindrical (base) diameters 1 μm and 10 μm and aspect ratios (ratio of fiber length to base diameter) 3, 10 and 100. Modelling results showed that the highest fiber deposition occurred in the extra-thoracic region due to large particles (fiber cylindrical diameter dp > 0.1 μm), whereas particle length (via the aspect ratio) had an influence mainly on smaller base-diameter fibers (dp < 0.1 μm) that deposited predominantly in the alveolar region. The ExDoM2 dosimetry model was also used to calculate fiber deposition in the HRT using experimental data for microplastic fiber and fragment concentrations in different microenvironments. The highest deposited number dose (220 fibers) after a 24-hour exposure was calculated in the microenvironment (bus) that had the highest fiber concentration (17.3 ± 2.4 fibers/m3). After clearance, the majority (66.4 %) of the average deposited fiber mass was transferred from the respiratory tract to the esophagus via mucociliary clearance, 32.6 % was retained in the respiratory tract, 1 % passed into the blood, and a very small amount (0.0004 %) was transferred to the lymph nodes.

Synthetic vitreous fibers (SVFs): adverse outcome pathways (AOPs) and considerations for next generation new approach methods (NAMs)

Fiber dimension, durability/dissolution, and biopersistence are critical factors for the risk of fibrogenesis and carcinogenesis. In the modern era, to reduce, refine, and replace animals in toxicology research, the application of in vitro test methods is paramount for hazard evaluation and designing synthetic vitreous fibers (SVFs) for safe use. The objectives of this review are to: (1) summarize the international frameworks and acceptability criteria for implementation of new approach methods (NAMs), (2) evaluate the adverse outcome pathways (AOPs), key events (KEs), and key event relationships (KERs) for fiber-induced fibrogenesis and carcinogenesis in accordance with Organization for Economic Co-operation and Development (OECD) guidelines, (3) consider existing and emerging technologies for in silico and in vitro toxicity testing for the respiratory system and the ability to predict effects in vivo, (4) outline a recommended testing strategy for evaluating the hazard and safety of novel SVFs, and (5) reflect on methods needs for in vitro in vivo correlation (IVIVC) and predictive approaches for safety assessment of new SVFs. AOP frameworks following the conceptual model of the OECD were developed through an evaluation of available molecular and cellular initiating events, which lead to KEs and KERs in the development of fiber-induced fibrogenesis and carcinogenesis. AOP framework development included consideration of fiber physicochemical properties, respiratory deposition and clearance patterns, biosolubility, and biopersistence, as well as cellular, organ, and organism responses. Available data support that fiber AOPs begin with fiber physicochemical characteristics which influence fiber exposure and biosolubility and subsequent key initiating events are dependent on fiber biopersistence and reactivity. Key cellular events of pathogenic fibers include oxidative stress, chronic inflammation, and epithelial/fibroblast proliferation and differentiation, which ultimately lead to hyperplasia, metaplasia, and fibrosis/tumor formation. Available in vitro models (e.g. single-, multi-cellular, organ system) provide promising NAMs tools to evaluate these intermediate KEs. However, data on SVFs demonstrate that in vitro biosolubility is a reasonable predictor for downstream events of in vivo biopersistence and biological effects. In vitro SVF fiber dissolution rates >100 ng/cm2/hr (glass fibers in pH 7 and stone fibers in pH 4.5) and in vivo SVF fiber clearance half-life less than 40 or 50 days were not associated with fibrosis or tumors in animals. Long (fiber lengths >20 µm) biodurable and biopersistent fibers exceeding these fiber dissolution and clearance thresholds may pose a risk of fibrosis and cancer. In vitro fiber dissolution assays provide a promising avenue and potentially powerful tool to predict in vivo SVF fiber biopersistence, hazard, and health risk. NAMs for fibers (including SVFs) may involve a multi-factor in vitro approach leveraging in vitro dissolution data in complement with cellular- and tissue- based in vitro assays to predict health risk.

Recent Progress in Nucleic Acid Pulmonary Delivery toward Overcoming Physiological Barriers and Improving Transfection Efficiency

Pulmonary delivery of therapeutic agents has been considered the desirable administration route for local lung disease treatment. As the latest generation of therapeutic agents, nucleic acid has been gradually developed as gene therapy for local diseases such as asthma, chronic obstructive pulmonary diseases, and lung fibrosis. The features of nucleic acid, specific physiological structure, and pathophysiological barriers of the respiratory tract have strongly affected the delivery efficiency and pulmonary bioavailability of nucleic acid, directly related to the treatment outcomes. The development of pharmaceutics and material science provides the potential for highly effective pulmonary medicine delivery. In this review, the key factors and barriers are first introduced that affect the pulmonary delivery and bioavailability of nucleic acids. The advanced inhaled materials for nucleic acid delivery are further summarized. The recent progress of platform designs for improving the pulmonary delivery efficiency of nucleic acids and their therapeutic outcomes have been systematically analyzed, with the application and the perspectives of advanced vectors for pulmonary gene delivery.

Fibres in the nasal cavity: A pilot study of the recovery, background, and transfer in smothering scenarios

In cases where the suspected cause of death is smothering, fibre traces recovered from the nasal cavity are hypothesised to refute or support this proposition. In order to carry out such evaluations, an efficient recovery method must first be established. This pilot study tested five different recovery methods on 3D printed models of nasal cavities. Among which, the use of the transparent AccuTrans® polyvinyl Siloxane casts demonstrated the best recovery efficiency with a median of 90% of deposited fibres recovered. The efficacy of this method was then verified on cadavers. Apart from a reliable recovery method, an understanding of the background population of fibres in nasal cavities, as well as the mechanisms of the transfer from the purported smothering textile to the nasal cavity is essential to evaluate the findings in these cases of suspected smothering. Samplings of the nasal cavities of 20 cadavers were thus carried out to gather data on the background population of fibres. Results showed that nasal cavities are not void of fibres, but the quantities are expected to be low, with a mean of 3.8 fibres per cavity recovered. Information on generic fibre class, colour, and length of these background fibres were also obtained with the use of low and high-power microscopy. The frequencies found in this population of fibres closely align with data from other population studies where black cotton was the most common. Finally, transfer experiments using the 3D printed models fitted with a respiratory pump to simulate breathing were carried out, along with testing on live volunteers in-vivo. The results demonstrated a verifiable transfer of fibres into the nasal cavity in smothering scenarios. Textiles of various shedding capacities were used in these tests and the findings suggest an influence of this variable on the quantities of fibres transferred.

Dimensions of elongate mineral particles and cancer: A review

CONTEXT

Based on a decade-long exploration, dimensions of elongate mineral particles are implicated as a pivotal component of their carcinogenic potency. This paper summarizes current understanding of the discovered relationships and their importance to the protection of public health.

OBJECTIVES

To demonstrate the relationships between cancer risk and dimensions (length, width, and other derivative characteristics) of mineral fibers by comparing the results and conclusions of previously published studies with newly published information.

METHODS

A database including 59 datasets comprising 341,949 records were utilized to characterize dimensions of elongate particles. The descriptive statistics, correlation and regression analysis, combined with Monte Carlo simulation, were used to select dimensional characteristics most relevant for mesothelioma and lung cancer risk prediction.

RESULTS

The highest correlation between mesothelioma potency factor and weight fraction of size categories is achieved for fibers with lengths >5.6 μm and widths ≤0.26 μm (R = 0.94, P < 0.02); no statistically significant potency was found for lengths <5 μm. These results are consistent with early published estimations, though are derived from a different approach. For combinations of amphiboles and chrysotile (with a consideration of a correction factor between mineral classes), the potency factors correlated most highly with a fraction of fibers longer than 5 μm and thinner than 0.2 μm for mesothelioma, and longer than 5 μm and thinner than 0.3 μm for lung cancer. Because the proportion of long, thin particles in asbestiform vs. non-asbestiform dusts is higher, the cancer potencies of the former are predicted at a significantly higher level. The analysis of particle dimensionality in human lung burden demonstrates positive selection for thinner fibers (especially for amosite and crocidolite) and prevailing fraction of asbestiform habit.

CONCLUSION

Dimensions of mineral fibers can be confirmed as one of the main drivers of their carcinogenicity. The width of fibers emerges as a primary potency predictor, and fibers of all widths with lengths shorter than 5 μm seem to be non-impactful for cancer risk. The mineral dust with a fibrous component is primarily carcinogenic if it contains amphibole fibers longer than 5 μm and thinner than 0.25 μm.

Incorporating Bioaccessibility into Inhalation Exposure Assessment of Emamectin Benzoate from Field Spraying

The inhalation exposure of pesticide applicators and residents who live close to pesticide-treated fields is a worldwide concern in public health. Quantitative assessment of exposure to pesticide inhalation health risk highlights the need to accurately assess the bioaccessibility rather than the total content in ambient air. Herein, we developed an in vitro method to estimate the inhalation bioaccessibility of emamectin benzoate and validated its applicability using a rat plasma pharmacokinetic bioassay. Emamectin benzoate was extracted using the Gamble solution, with an optimized solid-to-liquid ratio (1/250), extraction time (24 h), and agitation (200 rpm), which obtained in vitro inhalation bioaccessibility consistent with its inhalation bioavailability in vivo (32.33%). The margin of exposure (MOE) was used to assess inhalation exposure risk. The inhalation unit exposures to emamectin benzoate of applicators and residents were 11.05-28.04 and 0.02-0.04 ng/m³, respectively, varying markedly according to the methods of application, e.g., formulations and nozzles. The inhalation risk assessment using present application methods appeared to be acceptable; however, the MOE of emamectin benzoate might be overestimated by 32% without considering inhalation bioaccessibility. Collectively, our findings contribute insights into the assessment of pesticide inhalation exposure based on bioaccessibility and provide guidance for the safe application of pesticides.

Mechanisms and challenges of nanocarriers as non-viral vectors of therapeutic genes for enhanced pulmonary delivery

With the rapid development of biopharmaceuticals and the outbreak of COVID-19, the world has ushered in a frenzy to develop gene therapy. Therefore, therapeutic genes have received enormous attention. However, due to the extreme instability and low intracellular gene expression of naked genes, specific vectors are required. Viral vectors are widely used attributed to their high transfection efficiency. However, due to the safety concerns of viral vectors, nanotechnology-based non-viral vectors have attracted extensive investigation. Still, issues of low transfection efficiency and poor tissue targeting of non-viral vectors need to be addressed. Especially, pulmonary gene delivery has obvious advantages for the treatment of inherited lung diseases, lung cancer, and viral pneumonia, which can not only enhance lung targeting and but also reduce enzymatic degradation. For systemic diseases therapy, pulmonary gene delivery can enhance vaccine efficacy via inducing not only cellular, humoral immunity but also mucosal immunity. This review provides a comprehensive overview of nanocarriers as non-viral vectors of therapeutic genes for enhanced pulmonary delivery. First of all, the characteristics and therapeutic mechanism of DNA, mRNA, and siRNA are provided. Thereafter, the advantages and challenges of pulmonary gene delivery in exerting local and systemic effects are discussed. Then, the inhalation dosage forms for nanoparticle-based drug delivery systems are introduced. Moreover, a series of materials used as nanocarriers for pulmonary gene delivery are presented, and the endosomal escape mechanisms of nanocarriers based on different materials are explored. The application of various non-viral vectors for pulmonary gene delivery are summarized in detail, with the perspectives of nano-vectors for pulmonary gene delivery.

Global geological occurrence and character of the carcinogenic zeolite mineral, erionite: A review

As with the six regulated asbestos minerals (chrysotile, amosite, crocidolite, anthophyllite, tremolite, and actinolite), the zeolite mineral, erionite, can exhibit a fibrous morphology. When fibrous erionite is aerosolized and inhaled, it has been linked to cases of lung cancers, such as malignant mesothelioma. Importantly, fibrous erionite appears to be more carcinogenic than the six regulated asbestos minerals. The first health issues regarding erionite exposure were reported in Cappadocia (Turkey), and more recently, occupational exposure issues have emerged in the United States. Erionite is now classified as a Group 1 carcinogen. Thus, identifying the geological occurrence of erionite is a prudent step in determining possible exposure pathways, but a global review of the geological occurrence of erionite is currently lacking. Here, we provide a review of the >100 global locations where erionite has been reported, including: 1) geological setting of host rocks; 2) paragenetic sequence of erionite formation, including associated zeolite minerals; 3) fiber morphological properties and erionite mineral series (i.e., Ca, K, Na); and 4) a brief overview of the techniques that have been used to identify and characterize erionite. Accordingly, erionite has been found to commonly occur within two major rock types: felsic and mafic. Within felsic rocks (in particular, tuffaceous layers within lacustrine paleoenvironments), erionite is disseminated through the layer as a cementing matrix. In contrast, within mafic (i.e., basaltic) rocks, erionite is typically found within vesicles. Nevertheless, aside from detailed studies in Italy and the United States, there is a paucity of specific information on erionite geological provenance or fiber morphology. The latter issue is a significant drawback given its impact on erionite toxicity. Future erionite studies should aim to provide more detailed information, including variables such as rock type and lithological properties, quantitative geochemistry, and fiber morphology.

Pulmonary Toxicity of Silica Linked to Its Micro- or Nanometric Particle Size and Crystal Structure: A Review

Silicon dioxide (SiO2) is a mineral compound present in the Earth’s crust in two mineral forms: crystalline and amorphous. Based on epidemiological and/or biological evidence, the pulmonary effects of crystalline silica are considered well understood, with the development of silicosis, emphysema, chronic bronchitis, or chronic obstructive pulmonary disease. The structure and capacity to trigger oxidative stress are recognized as relevant determinants in crystalline silica’s toxicity. In contrast, natural amorphous silica was long considered nontoxic, and was often used as a negative control in experimental studies. However, as manufactured amorphous silica nanoparticles (or nanosilica or SiNP) are becoming widely used in industrial applications, these paradigms must now be reconsidered at the nanoscale (<100 nm). Indeed, recent experimental studies appear to point towards significant toxicity of manufactured amorphous silica nanoparticles similar to that of micrometric crystalline silica. In this article, we present an extensive review of the nontumoral pulmonary effects of silica based on in vitro and in vivo experimental studies. The findings of this review are presented both for micro- and nanoscale particles, but also based on the crystalline structure of the silica particles.

Could soluble minerals be hazardous to human health? Evidence from fibrous epsomite

From a toxicological point of view, particulates and fibres with high solubility in water and/or in biological environments have not been considered in detail and the knowledge to date in this area is very scarce. In this study, the water-soluble natural epsomite fibres from Perticara Mine (Italy) were investigated using SEM-EDS, XRPD, ICP-AES and alpha spectrometry measurements which were combined and integrated to characterise the fibres' morphology, crystal chemistry and mineralogy. The morphological and morphometric results showed that most of the fibres are of inhalable size (D_ae 5.09 μm) and can be potentially adsorbed from all parts of the respiratory tract. Chemical analysis reveals significant amounts of toxic elements (As, Co, Fe, Mn, Ni, Sr, Ti, Zn) and surprisingly high contents of radioactive isotopes (²¹⁰Po and ²²⁸Th) in epsomite crystals, making the inhalation of these fibres potentially hazardous to human health. Through this study, we want to focus on soluble minerals, such as epsomite, which can be present in both natural and anthropic environments and have never been considered from the point of view of their potential hazard.

Modelled lung deposition and retention of welding fume particles in occupational scenarios: a comparison to doses used in vitro

Translating particle dose from in vitro systems to relevant human exposure remains a major challenge for the use of in vitro studies in assessing occupational hazard and risk of particle exposure. This study aimed to model the lung deposition and retention of welding fume particles following occupational scenarios and subsequently compare the lung doses to those used in vitro. We reviewed published welding fume concentrations and size distributions to identify input values simulating real-life exposure scenarios in the multiple path particle dosimetry (MPPD) model. The majority of the particles were reported to be below 0.1 μm and mass concentrations ranged between 0.05 and 45 mg/m3. Following 6-h exposure to 5 mg/m3 with a count median diameter of 50 nm, the tracheobronchial lung dose (0.89 µg/cm2) was found to exceed the in vitro cytotoxic cell dose (0.125 µg/cm2) previously assessed by us in human bronchial epithelial cells (HBEC-3kt). However, the tracheobronchial retention decreased rapidly when no exposure occurred, in contrast to the alveolar retention which builds-up over time and exceeded the in vitro cytotoxic cell dose after 1.5 working week. After 1 year, the tracheobronchial and alveolar retention was estimated to be 1.15 and 2.85 µg/cm2, respectively. Exposure to low-end aerosol concentrations resulted in alveolar retention comparable to cytotoxic in vitro dose in HBEC-3kt after 15-20 years of welding. This study demonstrates the potential of combining real-life exposure data with particle deposition modelling to improve the understanding of in vitro concentrations in the context of human occupational exposure.

Human exposure to metals in consumer-focused fused filament fabrication (FFF)/ 3D printing processes

Fused filament fabrication (FFF) or 3D printing is a growing technology used in industry, cottage industry and for consumer applications. Low-cost 3D printing devices have become increasingly popular among children and teens. Consequently, 3D printers are increasingly common in households, schools, and libraries. Because the operation of 3D printers is associated with the release of inhalable particles and volatile organic compounds (VOCs), there are concerns of possible health implications, particularly for use in schools and residential environments that may not have adequate ventilation such as classrooms bedrooms and garages, etc. Along with the growing consumer market for low-cost printers and printer pens, there is also an expanding market for a range of specialty filaments with additives such as inorganic colorants, metal particles and nanomaterials as well as metal-containing flame retardants, antioxidants, heat stabilizers and catalysts. Inhalation of particulate-associated metals may represent a health risk depending on both the metal and internal dose to the respiratory tract. Little has been reported, however, about the presence, speciation, and source of metals in the emissions; or likewise the effect of metals on emission processes and toxicological implications of these 3D printer generated emissions. This report evaluates various issues including the following: metals in feedstock with a focus on filament characteristics and function of metals; the effect of metals on the emissions and metals detected in emissions; printer emissions, particle formation, transport, and transformation; exposure and translation to internal dose; and potential toxicity on inhaled dose. Finally, data gaps and potential areas of future research are discussed within these contexts.

Dimensional determinants for the carcinogenic potency of elongate amphibole particles

CONTEXT

Carcinogenic properties of particulates depend, among other factors, on dimensional characteristics that affect their ability to reach sensitive tissue, to be removed or retained, and to interact with the cells.

OBJECTIVE

To model mesothelioma and lung cancer potency of amphibole particles based on their dimensional characteristics and mineral habit (asbestiform vs. nonasbestiform) utilizing epidemiological data and detailed size information.

METHODS

The datasets from recently created depository of dimensional information of elongate mineral particles were used to correlate mesothelioma and lung cancer potency with the fraction of particles in a specific size range and the ratio of length and width in different powers. In addition, the cancer potency factors were estimated and compared for 30 asbestiform, 15 nonasbestiform, and 10 mixed datasets.

RESULTS

For particles longer than 5 µm, the highest correlation with mesothelioma potency was achieved for width <0.22 µm, and with lung cancer <0.28 µm. The statistical power of the correlation was observed to lose significance at a maximum width of 0.6-0.7 µm. Mesothelioma potency correlated with length in the power of 1.9 divided by width in the power of 2.97, lung cancer potency with length in the power of 0.4 divided by width in the power of 1.17. The predicted cancer potencies of asbestiform, nonasbestiform, and mixed categories were significantly different.

CONCLUSION

While additional studies in this direction are warranted, this paper should serve as an additional confirmation for the role of fiber dimensions in the carcinogenicity of amphibole elongate mineral particles (EMPs).

3D Printer Particle Emissions: Translation to Internal Dose in Adults and Children

Desktop fused deposition modeling (FDM®) three-dimensional (3D) printers are becoming increasingly popular in schools, libraries, and among home hobbyists. FDM® 3D printers have been shown to release ultrafine airborne particles in large amounts, indicating the potential for inhalation exposure and consequent health risks among FDM® 3D printer users and other room occupants including children. These particles are generated from the heating of thermoplastic polymer feedstocks during the FDM® 3D printing process, with the most commonly used polymers being acrylonitrile butadiene styrene (ABS) and poly-lactic acid (PLA). Risk assessment of these exposures demands estimation of internal dose, especially to address intra-human variability across life stages. Dosimetry models have proven to effectively translate particle exposures to internal dose metrics relevant to evaluation of their effects in the respiratory tract. We used the open-access multiple path particle dosimetry (MPPD v3.04) model to estimate inhaled particle deposition in different regions of the respiratory tract for children of various age groups from three months to eighteen years old adults. Mass concentration data for input into the MPPD model were calculated using particle size distribution and density data from experimental FDM® 3D printer emissions tests using both ABS and PLA. The impact of changes in critical parameters that are principal determinants of inhaled dose, including: sex, age, and exposure duration, was examined using input parameter values available from the International Commission on Radiological Protection. Internal dose metrics used included regional mass deposition, mass deposition normalized by pulmonary surface area, surface area of deposited particles by pulmonary surface area, and retained regional mass. Total mass deposition was found to be highest in the 9-year-old to 18-year-old age groups with mass deposition by pulmonary surface area highest in 3-month-olds to 9-year-olds and surface area of deposited particles by pulmonary surface area to be highest in 9-year-olds. Clearance modeling revealed that frequent 3D printer users are at risk for an increased cumulative retained dose.

Stem Cells for Next Level Toxicity Testing in the 21st Century

The call for a paradigm change in toxicology from the United States National Research Council in 2007 initiates awareness for the invention and use of human-relevant alternative methods for toxicological hazard assessment. Simple 2D in vitro systems may serve as first screening tools, however, recent developments infer the need for more complex, multicellular organotypic models, which are superior in mimicking the complexity of human organs. In this review article most critical organs for toxicity assessment, i.e., skin, brain, thyroid system, lung, heart, liver, kidney, and intestine are discussed with regards to their functions in health and disease. Embracing the manifold modes-of-action how xenobiotic compounds can interfere with physiological organ functions and cause toxicity, the need for translation of such multifaceted organ features into the dish seems obvious. Currently used in vitro methods for toxicological applications and ongoing developments not yet arrived in toxicity testing are discussed, especially highlighting the potential of models based on embryonic stem cells and induced pluripotent stem cells of human origin. Finally, the application of innovative technologies like organs-on-a-chip and genome editing point toward a toxicological paradigm change moves into action.

Airborne concentrations of chrysotile asbestos during operation of industrial crane controls and maintenance of associated arc chutes

Some industrial crane control panels were historically equipped with chrysotile-containing arc chutes. Because of the paucity of data regarding potential exposure from such equipment, we used a simulation approach to quantify the release of chrysotile from arc chutes in two functional 1970s-era industrial crane control panels during operation and maintenance. Two experienced operators separately simulated operation of crane controls under load; one of these operators then simulated two arc chute maintenance protocols: sanding (protocol 1) and scraping, sanding, and blowing (protocol 2). The original arc chutes contained approximately 36% chrysotile. Personal breathing zone (PBZ) (n = 8) and area samples (n = 8) were collected and analyzed using phase contrast microscopy (PCM) and transmission electron microscopy. PCM-equivalent (PCME) concentrations were derived, from which 8-h time-weighted averages (TWA) were calculated. During operation, chrysotile was identified in one of the four PBZ samples, equivalent to a PCME concentration of 0.012 f/cm³ (8-h TWA: 0.011 f/cm³). During protocols 1 and 2, chrysotile was identified in all PBZ samples (n = 4); PCME concentrations (and corresponding 8-h TWA) were <0.013 and 0.021 f/cm³ (0.001 and 0.004 f/cm³) and 0.013 and 0.017 f/cm³ (0.003 f/cm³), respectively. Many of the airborne chrysotile fibers had matrix attached, supporting the low exposure potential during this work. These data indicate very low, if any, exposures to chrysotile asbestos during the simulated scenarios. In addition, these data could assist with refining assumptions in exposure reconstruction and inform the state-of-the science on low-level chrysotile exposure.

Inhalation Toxicity of Talc

Respirable talc powder (RTP) is a complex mineral mixture of talc along with accessory minerals, including tremolite, anthophyllite, quartz, magnesite, dolomite, antigorite, lizardite, and chlorite. The industrial mining, milling, and processing of talc ore is associated with elevated incidences of fibrotic and neoplastic diseases, which are also seen among workers exposed to RTP in secondary industries and individuals using processed cosmetic talc for personal use. There is controversial evidence of a link between the talc-induced lung diseases and a potential contamination with asbestos fibers. This controversy is fueled by inadequate exposure data and the complex mineralogy and terminology of the accessory minerals. Talc aerosols exhibit a wide range of mineral habits, including particulates and fibrous structures that have dimensional and compositional characteristics related to the development of asbestos-related lung disease. The inhalation toxicology of RTP is based on the analysis of occupational hygiene and animal inhalation studies conducted between the 1940s and the 1990s and more recent mechanistic studies conducted both in vivo and in vitro. The review of talc toxicity studies reveals that the occupational studies provide only equivocal links between any of the components of the aerosols and the development of pulmonary cancer; however, there is substantial evidence of an association between the aerosols and pleural and pulmonary fibrosis and the development of nonmalignant respiratory disease. The animal inhalation and implantation studies appear to be less than optimal, which also appears to be true for the in vivo and in vitro studies. The mechanistic studies have identified the key pathogenic characteristics of asbestos to be long and thin fibers that are durable in lung tissues and fluids. Talc toxicity studies show that talc particles and fibers are durable and can remain in the lung for up to 40 years after the end of exposure. This extended tissue residence is considered to constitute a continuing tissue exposure that is capable of inducing the documented inflammatory and proliferative response. There is less consensus as to whether there is a threshold fiber length effect, as long, thin fibers (>5 μm) form only a small fraction of talc aerosols and the possible role of fibers >5 μm in the translocation from the lung to the pleura and their association with pleural fibrotic and carcinogenic lesions. Long, thin fibers are preferentially deposited in hot spots in the lung, such as airway bifurcations, areas typically associated with the development of lung cancer. The platy structures typical of talc can form oblate structures behaving more as fibers in the air stream, and these have also been shown to deposit preferentially in such locations. The review of the inhalation toxicity of talc provides a plausible explanation for the carcinogenic potential of RTP.

Tackling Complex Analytical Tasks: An ISO/TS-Based Validation Approach for Hydrodynamic Chromatography Single Particle Inductively Coupled Plasma Mass Spectrometry

Nano-carrier systems such as liposomes have promising biomedical applications. Nevertheless, characterization of these complex samples is a challenging analytical task. In this study a coupled hydrodynamic chromatography-single particle-inductively coupled plasma mass spectrometry (HDC-spICP-MS) approach was validated based on the technical specification (TS) 19590:2017 of the international organization for standardization (ISO). The TS has been adapted to the hyphenated setup. The quality criteria (QC), e.g., linearity of the calibration, transport efficiency, were investigated. Furthermore, a cross calibration of the particle size was performed with values from dynamic light scattering (DLS) and transmission electron microscopy (TEM). Due to an additional Y-piece, an online-calibration routine was implemented. This approach allows the calibration of the ICP-MS during the dead time of the chromatography run, to reduce the required time and enhance the robustness of the results. The optimized method was tested with different gold nanoparticle (Au-NP) mixtures to investigate the characterization properties of HDC separations for samples with increasing complexity. Additionally, the technique was successfully applied to simultaneously determine both the hydrodynamic radius and the Au-NP content in liposomes. With the established hyphenated setup, it was possible to distinguish between different subpopulations with various NP loads and different hydrodynamic diameters inside the liposome carriers.

In Silico Optimization of Fiber-Shaped Aerosols in Inhalation Therapy for Augmented Targeting and Deposition across the Respiratory Tract

Motivated by a desire to uncover new opportunities for designing the size and shape of fiber-shaped aerosols towards improved pulmonary drug delivery deposition outcomes, we explore the transport and deposition characteristics of fibers under physiologically inspired inhalation conditions in silico, mimicking a dry powder inhaler (DPI) maneuver in adult lung models. Here, using computational fluid dynamics (CFD) simulations, we resolve the transient translational and rotational motion of inhaled micron-sized ellipsoid particles under the influence of aerodynamic (i.e., drag, lift) and gravitational forces in a respiratory tract model spanning the first seven bifurcating generations (i.e., from the mouth to upper airways), coupled to a more distal airway model representing nine generations of the mid-bronchial tree. Aerosol deposition efficiencies are quantified as a function of the equivalent diameter (dp) and geometrical aspect ratio (AR), and these are compared to outcomes with traditional spherical particles of equivalent mass. Our results help elucidate how deposition patterns are intimately coupled to dp and AR, whereby high AR fibers in the narrow range of dp = 6-7 µm yield the highest deposition efficiency for targeting the upper- and mid-bronchi, whereas fibers in the range of dp= 4-6 µm are anticipated to cross through the conducting regions and reach the deeper lung regions. Our efforts underscore previously uncovered opportunities to design the shape and size of fiber-like aerosols towards targeted pulmonary drug delivery with increased deposition efficiencies, in particular by leveraging their large payloads for deep lung deposition.