Pigment identification in artwork using graphite furnace atomic absorption spectrometry

Development of a wet digestion method for paints for the determination of metals and metalloids using inductively coupled plasma optical emission spectrometry

Paints, a complex matrix, have a variable composition that is dependent on the application. In this work, a new wet digestion procedure for the determination of Al, As, Ba, Cd, Cr, Cu, Mn, Ni, Pb, Sn, Sr, Ti and Zn in paint samples using inductively coupled plasma optical emission spectrometry (ICP OES) has been developed. An experimental design approach was employed to determine the optimal conditions for achieving complete solubilization and/or decomposition in the sample preparation method. An efficient sample preparation was developed that consisted of a pre-digestion step at 40°C for 20 min using 1 mL of HNO3 to eliminate organic solvents followed by digestion at 120°C for 3h using 5 mL of HCl and 1 mL of HF in a block digestion. The proposed procedure promotes the complete solubilization of different bases of paints at low temperature and atmospheric pressure. The accuracy was determined by addition/recovery tests and comparing the results with those obtained using the ASTM D335-85a standard sample preparation method. The limits of quantification were 1.78, 0.11, 0.006, 0.006, 0.01, 0.04, 0.006, 0.006, 0.02, 0.07, 0.30, 1.30 and 0.30 mg kg(-1) for Al, As, Ba, Cd, Cr, Cu,Mn, Ni, Pb, Sn, Sr, Ti and Zn, respectively. The proposed method was applied for the analysis of inorganics via the ICP OES of paints with different colors and bases used to cover wall surfaces.

Green pigments of the Pompeian artists' palette

Green colored samples on wall paintings and green powder from a pigment pot found in Pompeii area are investigated by micro-Raman, FT-IR and, for one sample, SEM-EDX. To obtain the green color, green earths and malachite were used, together with mixture of Egyptian blue and yellow ochre. The mineralogical identification of the green earths has been attempted through the comparison of the vibrational features, discriminating between celadonite and glauconite spectra. Traces of a modern synthetic pigment containing copper phthalocyanine were found in a fresco fragment.

Development of direct competitive enzyme-linked immunosorbent assay for the determination cadmium residue in farm produce

Cadmium, a toxic heavy metal, poses a significant threat to human health. Currently, the methods for detecting cadmium residue in farm produce need expensive equipment, intensive labor, and much time to finish one detection. In this study, a direct competitive enzyme-linked immunosorbent assay (DC-ELISA) based on a cadmium-chelate-specific monoclonal antibody has been developed. The DC-ELISA showed an IC(50) of 2.30 microg/L with a detection limit of 0.20 microg/L for cadmium. The assay has been demonstrated to be highly specific since the monoclonal antibody showed little or no cross-reactivity with all tested metal chelates which include Cd(2+), Pb(2+), Hg(2+), Zn(2+), Na(+), Ca(2+), Fe(3+), Mg(2+), Mn(2+), Cu(2+), Al(3+), Co(2+), Cr(2+), Ni(2+), Sn(2), and K(+). The assay showed that a mean recovery ranged from 100.47% to 103.86%, and the coefficients of variations for intra- and inter-assay were 1.73-7.14% and 3.63-6.81%, respectively. Then, several farm produces including wheat flour, apple juice, rice flour, and tea were analyzed for cadmium residue with DC-ELISA and graphite furnace atomic absorption spectroscopy (GFAAS). The correlation coefficient between the DC-ELISA and GFAAS was 0.99. It was demonstrated that the DC-ELISA can be used as a simple and economic method to detect and quantitate cadmium residue in farm produce.

Determination of trace elements in paints by direct sampling graphite furnace atomic absorption spectrometry

A direct sampling graphite furnace atomic absorption spectrometric (DS-GFAAS) method for the determination of Cd, Pb, Cr, Ni, Co and Cu in paints has been developed. Serigraphy, acrylic and tattoo paints were analysed. Approaches like pyrolysis and atomization temperatures, modifiers and sample mass introduced in the atomizer were studied. Quantification was performed using calibration curves measured with aqueous standard solutions pipetted onto the platform. The sample mass introduced in the graphite tube ranged from 0.02 to 8.0 mg. Palladium was used as modifier for Cd, Pb and Cu, while Mg(NO3)2 was used for Co. For Ni determination, the graphite platform was covered with carbon powder. The characteristic masses of Cd, Pb, Cr, Ni, Co and Cu were 1.4, 22.5, 7.9, 11.0, 9.6 and 12.5 pg, while the limits of detection were 0.0004, 0.001, 0.03, 0.22, 0.11 and 0.05 microg g(-1) of Cd, Pb, Cr, Ni, Co and Cu, respectively. The accuracy was determined by comparison of the results with those obtained by inductively coupled plasma mass spectrometry (ICP-MS) and graphite furnace atomic absorption spectrometry (GFAAS), using liquid sampling of digests. For matrix characterization, major and minor elements (Al, Mg, Ba, Ca, Cr, Cu, Pb, Sr, Ti and Mg) were determined by inductively coupled plasma optical emission spectrometry (ICP OES).