3D CuO nanosheet wrapped nanofilm grown on Cu foil for high-performance non-enzymatic glucose biosensor electrode

Grain boundary/doping/architecture engineering in hierarchical N-doped CuO microflowers derived from Cu-based metal-organic framework architectures for highly efficient nonenzymatic glucose detection

Glucose detection is essential in clinical medicine, and the reasonable design of metal oxide electrocatalysts plays a crucial role in developing efficient nonenzymatic glucose (NEG) sensors. Herein, grain boundary/doping/architecture engineering is used to tailor the structures of CuO nanomaterials and tune their surface/electron-transfer properties toward enhanced electrocatalytic oxidation of glucose. Hierarchical N-doped CuO microflowers (N-CuO-MF) are synthesized using a facile hydrothermal method, followed by calcination. N-CuO-MF consist of ultrathin nanoflakes (ca. 20 nm), endowing them with a large specific surface area. Moreover, the nanoflakes are composed of ultrasmall nanoparticles, resulting in abundant grain boundaries. Notably, N-CuO-MF are derived from a precursor of Cu-based metal-organic framework (Cu-MOF) architectures, which is fabricated through a bottom-up route using glycerol as the capping agent/solvent and 1-hexadecyl-3-methylimidazolium bromide ([C16mim]Br) as the template/N source. Glycerol competitively coordinates with Cu2+, leading to the formation of 2D subunits. Moreover, [C16mim]+ cations attach to the subunit surfaces via electrostatic interaction, thus achieving Cu-MOF with a 3D hierarchical structure. As expected, the synergistic effect of rich grain boundaries, N doping, ultrathin nanoflakes, and hierarchical architecture enhances the adsorption of glucose on the electrode surfaces, accelerates electron transfer, and exposes more active sites for glucose oxidation. Accordingly, N-CuO-MF exhibit wide linear ranges, high sensitivity, fast response time, low detection limit, excellent selectivity, and good stability. Owing to their highly efficient electrocatalytic properties, N-CuO-MF could be explored as potential electrocatalysts in NEG sensors for rapid diagnostic tests and health monitoring.

Enhancing Nonenzymatic Glucose Detection Through Cobalt-Substituted Hafnia

Engineered defect chemistry in ultrathin (≈5 nm) hafnia through substitutional cobalt (HCO) is investigated for selective glucose sensing. Thin films of HCO, grown using chemical solution deposition (CSD)-traditionally used to grow thick films-on silicon, show significant glucose sensing activity and undergo monoclinic to orthorhombic phase transformation. The presence of multivalent cobalt in hafnia, with oxygen vacancies in proximity, selectively oxidizes glucose with minimal interference from ascorbic acid, dopamine, and uric acid. Theoretical investigations reveal that these oxygen vacancies create a shallow donor level that significantly enhances electrocatalytic activity by promoting charge transfer to the conduction band. This results in considerable selectivity, repeatability, and reproducibility in sensing characteristics. These findings highlight the technological importance of using CSD for thin films, paving the way for ultrathin CSD-processed HCOs as potential candidates for selective glucose sensing applications.

Self-Supported Cu/Fe3O4 Hierarchical Nanosheets on Ni Foam for High-Efficiency Non-Enzymatic Glucose Sensing

Electrochemical glucose sensors are vital for clinical diagnostics and the food industry, where accurate detection is essential. However, the limitations of glucose oxidase (GOx)-based sensors, such as complex preparation, high cost, and environmental sensitivity, highlight the need for non-enzymatic sensors that directly oxidize glucose at the electrode surface. In this study, a self-supporting hierarchical Cu/Fe3O4 nanosheet electrode was successfully fabricated by in situ growth on Ni Foam using a hydrothermal method, followed by annealing treatment. The Cu/Fe3O4 hierarchical nanosheet structure, with its large surface area, provides abundant active sites for electrocatalysis, while the strong interactions between Cu/Fe3O4 and Ni Foam enhance electron transfer efficiency. This novel electrode structure demonstrates exceptional electrochemical performance for non-enzymatic glucose sensing, with an ultrahigh sensitivity of 12.85 μA·μM-1·cm-2, a low detection limit of 0.71 μM, and a linear range extending up to 1 mM. Moreover, the Cu/Fe3O4/NF electrode exhibits excellent stability, a rapid response (~3 s), and good selectivity against interfering substances such as uric acid, ascorbic acid, H2O2, urea, and KCl. It also shows strong reliability in analyzing human serum samples. Therefore, Cu/Fe3O4/NF holds great promise as a non-enzymatic glucose sensor, and this work offers a valuable strategy for the design of advanced electrochemical electrodes.

Nonenzymatic Glucose Sensor Using Bimetallic Catalysts

Bimetallic glucose oxidation electrocatalysts were synthesized by two electrochemical reduction reactions carried out in series onto a titanium electrode. Nickel was deposited in the first synthesis stage followed by either silver or copper in the second stage to form Ag@Ni and Cu@Ni bimetallic structures. The chemical composition, crystal structure, and morphology of the resulting metal coating of the titanium electrode were investigated by X-ray diffraction, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, and electron microscopy. The electrocatalytic performance of the coated titanium electrodes toward glucose oxidation was probed using cyclic voltammetry and amperometry. It was found that the unique high surface area bimetallic structures have superior electrocatalytic activity compared to nickel alone. The resulting catalyst-coated titanium electrode served as a nonenzymatic glucose sensor with high sensitivity and low limit of detection for glucose. The Cu@Ni catalyst enables accurate measurement of glucose over the concentration range of 0.2-12 mM, which includes the full normal human blood glucose range, with the maximum level extending high enough to encompass warning levels for prediabetic and diabetic conditions. The sensors were also found to perform well in the presence of several chemical compounds found in human blood known to interfere with nonenzymatic sensors.

Advances in nanostructured material-based non-enzymatic electrochemical glucose sensors

Non-enzymatic electrochemical sensors that use functional materials to directly catalyze glucose have shown great promise in diabetes management, food control, and bioprocess inspection owing to the advantages of high sensitivity, long-term stability, and low cost. Recently, in order to produce enhanced electrochemical behavior, significant efforts have been devoted to the preparation of functional materials with regular nanostructure, as it provides high specific surface area and well-defined strong active sites for electrochemical sensing. However, the structure-performance correlation in this field has not been reviewed thoroughly in the literature. This review aims to present a comprehensive report on advanced zero- to three-dimensional nanostructures based on the geometric feature and to discuss in depth their structural effects on enzyme-free electrochemical detection of glucose. It starts by illustrating the sensing principles of nanostructured materials, followed by a detailed discussion on the structural effects related to the features of each dimension. The structure-performance correlation is explored by comparing the performance derived from diverse dimensional architectures, which is beneficial for the better design of regular nanostructure to achieve efficient enzyme-free sensing of glucose. Finally, future directions of non-enzymatic electrochemical glucose sensors to solve emerging challenges and further improve the sensing performance are also proposed.

Free-standing hybrid material of Cu/Cu2O/CuO modified by graphene with commercial Cu foil using for non-enzymatic glucose detection

Free-standing Cu/Cu₂O/CuO modified by graphene was formed through two steps: Firstly, the commercial Cu foil was thermal annealed to form Cu/Cu₂O/CuO; Secondly, the Cu/Cu₂O/CuO was modified by graphene through electrochemical exfoliated method. The SEM, XRD, TEM and XPS have been used to characterize the morphology, the crystalline phase, and the surface composition of the hybrid electrode as-prepared. The effects of Cu and its oxides on graphene has been uncovered by the Raman results. The sensitivity of the glucose sensor in 0.1 M NaOH by using the as-prepared hybrid material reaches 3102μA·mM^-1cm^-2within a linear range of 0.002-2.88 mM, which is better than that of the Cu/graphene and the Cu/Cu₂O/CuO prepared at the same conditions. The sensor also shows excellent anti-interference ability, good cycling stability and time stability. The advantage of the sensor is caused by the strengthened synergistic effects between the graphene and the Cu/Cu₂O/CuO due to the alleviated detrimental effects of the metal on the property of the graphene through using oxides middle layer as well as the large active area that obtained. This work provides a new way to study the effects of graphene in improving the property of the metal oxide especially in using for glucose sensor.

Green Fabrication of Nonenzymatic Glucose Sensor Using Multi-Walled Carbon Nanotubes Decorated with Copper (II) Oxide Nanoparticles for Tear Fluid Analysis

In this report, a green, simple, inexpensive, and effective nonenzymatic electrochemical glucose sensor was fabricated using multi-walled carbon nanotubes (MWCNT) decorated with copper (II) oxide nanoparticles (CuO NPs). Basil seed mucilage (BSM) was served as reducing, capping, and stabilizing agents in the synthesis of CuO NPs.The prepared MWCNT/CuO nanocomposite was characterized using Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), and electrochemical methods. The FTIR results indicated that the nanocomposite surface was covered by BSM. The FESEM results show that the CuO NPs with an average particle size lower than 10 nm have been well distributed on the walls of the MWCNT. The electrochemical behavior of the nanocomposite was explored by studying the electrocatalytic behavior of the screen-printed carbon electrode (SPCE) modified by the nanocomposite (SPCE-MWCNT/CuO) toward the glucose oxidation. In the optimum conditions, the electrode indicated a wide linear response from 5.0 to 620.0 μM with regression coefficients of 0.992, the sensitivity of 1050 μA mM^-1 cm^-2, a limit of detection (LOD) of 1.7 μM, and a reproducibility with relative standard deviation (RSD) variations from 3.5 to 11% for three measurements at each point. The obtained results also showed good selectivity to glucose against interfering species such as lactate (LA), L-ascorbic acid (AA), and urea (U) due to the use of the negatively charged BSM in the form of a coating on the nanocomposite surface. The applicability of the sensor was successfully verified by the determination of glucose concentration in artificial tears with a certain amount of glucose.

Electrocatalytic CuBr@CuO nanoparticles based salivary glucose probes

Highly electrocatalytic cuprous halide/copper oxide nanoparticles (CuX@CunO NPs; X = Cl, Br or I; n = 1 or 2) have been fabricated on copper foils for sensitive detection of glucose. Formation of CuX@Cu_nO NPs involves two steps- in situ electrochemical deposition of CuX on the foil and then conversion of CuX to Cu_nO. The deposited CuX converts to Cu_nO, leading to the generation of abundant oxygen vacancies in the CuO lattice, enhancing the number of catalytically active sites, and improving the charge transfer efficiency. Among the as-prepared electrodes, CuBr@CuO NP ones provide the highest electrocatalytic activity toward the oxidation of glucose. The electrode provides electrocatalytic activity toward the oxidation of glucose at a low overpotential of 0.25 V (vs. SCE), which is lower than that (0.40 V) of unmodified copper electrodes. The generated anodic current is proportional to glucose concentration in an alkaline medium, with a good linear range from 5.0 μM to 3.51 mM (R² = 0.995). Its reliability has been validated by detecting the glucose concentration in saliva samples at different time intervals after a meal. The results are in good correlation with the blood glucose level determined by using a commercial blood glucose meter. Our CuBr@CuO NP electrode possesses great potential for monitoring salivary glucose to achieve the purpose of noninvasive glucose monitoring for patients with diabetes in the future.

Recent Advances in Non-Enzymatic Glucose Sensors Based on Metal and Metal Oxide Nanostructures for Diabetes Management- A Review

There is an undeniable growing number of diabetes cases worldwide that have received widespread global attention by many pharmaceutical and clinical industries to develop better functioning glucose sensing devices. This has called for an unprecedented demand to develop highly efficient, stable, selective, and sensitive non-enzymatic glucose sensors (NEGS). Interestingly, many novel materials have shown the promising potential of directly detecting glucose in the blood and fluids. This review exclusively encompasses the electrochemical detection of glucose and its mechanism based on various metal-based materials such as cobalt (Co), nickel (Ni), zinc (Zn), copper (Cu), iron (Fe), manganese (Mn), titanium (Ti), iridium (Ir), and rhodium (Rh). Multiple aspects of these metals and their oxides were explored vis-à-vis their performance in glucose detection. The direct glucose oxidation via metallic redox centres is explained by the chemisorption model and the incipient hydrous oxide/adatom mediator (IHOAM) model. The glucose electrooxidation reactions on the electrode surface were elucidated by equations. Furthermore, it was explored that an effective detection of glucose depends on the aspect ratio, surface morphology, active sites, structures, and catalytic activity of nanomaterials, which plays an indispensable role in designing efficient NEGS. The challenges and possible solutions for advancing NEGS have been summarized.

Non-Enzymatic Glucose Sensors Involving Copper: An Electrochemical Perspective

Non-enzymatic glucose sensors based on the use of copper and its oxides have emerged as promising candidates to replace enzymatic glucose sensors owing to their stability, ease of fabrication, and superior sensitivity. This review explains the theories of the mechanism of glucose oxidation on copper transition metal electrodes. It also presents an overview on the development of among the best non-enzymatic copper-based glucose sensors in the past 10 years. A brief description of methods, interesting findings, and important performance parameters are provided to inspire the reader and researcher to create new improvements in sensor design. Finally, several important considerations that pertain to the nano-structuring of the electrode surface is provided.

Morphology-dependent sensing performance of CuO nanomaterials

The morphology of nanomaterials affects their properties and further their applications. Herein, CuO nanomaterials with different morphologies are synthesized, including CuO nanostrips, nanowires and microspheres. After their characterization by means of electron microscopy and X-ray powder diffraction, these CuO nanomaterials are further mixed with graphene nanoplates (GNP) to explore their performance towards electrochemical detection of glucose and tetrabromobisphenol A (TBBPA). Among three composites, the composite of CuO nanostrips and GNP exhibits the largest active surface area, the lowest charge transfer resistance, and the highest accumulation efficiency toward TBBPA. Meanwhile, this composite based non-enzymatic sensor shows superior performance for the glucose monitoring. Since these sensors for the monitoring of both glucose and TBBPA possesses long-term stability, high reproducibility, and wide linear ranges and low detection limits, this work provides a strategy to tune the sensing performance of nanomaterials by means of tailoring the morphologies of nanomaterials.

A non-enzymatic disposable electrochemical sensor based on surface-modified screen-printed electrode CuO-IL/rGO nanocomposite for a single-step determination of glucose in human urine and electrolyte drinks

A non-enzymatic disposable electrochemical sensor coupled with an automated sample pretreatment paper-based device was developed to avoid an additional sample preparation step for glucose determination in human urine and electrolyte drinks. The automated sample pretreatment paper-based device was successfully fabricated by the simple coating of a strong alkaline solution on a patterned wax paper, and then attached on an electrochemical sensor. The nanocomposite of copper oxide nanoparticles, ionic liquid and reduced graphene oxide (CuO-IL/rGO) modified on the screen-printed carbon electrode (SPCE) was created and used as a non-enzymatic electrochemical glucose sensor. The presence of the CuO-IL/rGO nanocomposite on the screen-printed electrode surface was confirmed by transmission electron microscopy (TEM), scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDX), and X-ray diffraction spectroscopy (XRD). Under optimal conditions, glucose was measured by dropping 100 μL sample solution on the device and detected via chronoamperometry (CA) using a smartphone potentiostat controlled by Android app., providing a rapid current response within 20 s and linearity in a range of 0.03-7.0 mM with a limit of detection (LOD) of 0.14 μM. Furthermore, this developed device was successfully applied for determining glucose levels in human urine and electrolyte drinks, exporting satisfying results correlated with a commercial enzymatic glucose biosensor and labeled values of the commercial products. Therefore, this device could be an alternative device for a non-enzymatic glucose sensor with single-step sample loading, allowing for real-time analysis, low cost, portability, disposability, and on-field measurement.

Green synthesis of starch-capped Cu2O nanocubes and their application in the direct electrochemical detection of glucose

Glucose determination is an essential procedure in different fields, used in clinical analysis for the prevention and monitoring of diabetes. In this work, modified carbon paste electrodes with Cu₂O nanocubes (Cu₂O NCs) were developed to test electrochemical glucose detection. The synthesis of the Cu₂O NCs was achieved by a green method using starch as the capping agent, obtaining cubic-like morphologies and particle sizes from 227 to 123 nm with increasing amounts of the capping agent, as corroborated by electron microscopy analysis. Their crystalline structure and purity were determined by X-ray diffraction. The capability of starch as a capping agent was verified by Fourier-transform infrared spectroscopy, in which the presence of functional groups of this biopolymer in the Cu₂O NCs were identified. The electrochemical response to glucose oxidation was determined by cyclic voltammetry, obtaining a linear response of the electrical current as a function of glucose concentration in the range 100–700 μM, with sensitivities from 85.6 to 238.8 μA mM⁻¹ cm⁻², depending on the amount of starch used in the synthesis of the Cu₂O NCs.

Starch-capped Cu₂O nanocubes were used as an active electrochemical element to directly detect glucose.

New Bi2MoO6 nano-shapes toward ultrasensitive enzymeless glucose tracing: Synergetic effect of the Bi-Mo association

In a novel approach, an efficient non-enzymatic glucose sensor based on pure phase of aurivillius bismuth molybdate (BM or γ-Bi₂MoO₆) mixed metal oxides is reported. Three BM samples were synthesized, with/without l-cysteine (Cys) and dodecylamine (DDA) as additives, leading to different shapes: bullet (BM-C), confetti (BM-2Cys) and candy (BM-2DDA). The morphology and purity of the structures were confirmed by FE-SEM images and XRD. In order to investigate the sensor application, the samples were integrated on reduced graphene oxide and incorporated into simple and inexpensive glassy carbon electrode (GCE) without using any polyvinylpyrrolidone (PVP) or Nafion. To perform cyclic voltammetry experiments, all three biosensors were measured in PBS solution (pH = 7) in ±1.5 voltage range and 50 mV s^-1 scan rate. Glucose identification by the synthesized composites is an obvious sign of their high efficiency. According to chronoamperomograms, the best sensitivity of 3050 μA L mmol^-1 cm^-2 with linear range of 0.02-0.14 mmol L^-1, low detection limit (LOD) of 0.004 mmol L^-1 and the signal/noise equal to 3 was achieved by BM-2DDA/rGO/GCE biosensor and its speedy amperometric response is less than 5 s. This biosensor showed impressive selectivity, repeatability and reproducibility results besides it maintains its stability considerably in great percentage of 98.5% after eight weeks. Also it showed prolonged stability after 50 min.

Facile synthesis of CuCo2O4@NiCo2O4 hybrid nanowire arrays on carbon cloth for a multicomponent non-enzymatic glucose sensor

The design of hierarchical heterogeneous structures with rational components is considered as a promising method to enhance the properties of electrocatalyst. Binary metal oxides, with high electrochemical activity, have attracted considerable interest in glucose determination. In this work, we synthesized the CuCo₂O₄@NiCo₂O₄ hybrid structure on conductive carbon cloth (CC) via a simple two-step hydrothermal process and investigated its catalytic ability toward glucose. The two individual components that make up this hybrid electrode have good electrical conductivity and excellent catalytic properties for glucose, so the smart combination of these two active materials can provide more catalytic sites and sufficient redox couples for the glucose oxidation. As a result, the CuCo₂O₄@NiCo₂O₄ modified CC presented superior glucose sensing properties, including ultrahigh sensitivity, fast response time, wide linear range and acceptable detection limit. Besides, the sample also exhibited good selectivity for substances in human blood that interfere with glucose detection, such as UA, AA, fructose, sucrose and KCl. The potential of the CuCo₂O₄@NiCo₂O₄/CC electrode for practical application was investigated by measuring the glucose concentration in real serum samples. These results prove that the construction of hierarchical ordered structure is conducive to the improvement of glucose sensor.

The simple-preparation of Cu–Ni/CuO–NiO using solution plasma for application in a glucose enzyme-free sensor

The design of composite catalysts with two metals and their oxides for the detection of glucose is a particularly novel method to couple together the advantages of different kinds of metals.

Plasma-Strengthened Lithiophilicity of Copper Oxide Nanosheet-Decorated Cu Foil for Stable Lithium Metal Anode

Lithium metal is the most ideal anode for next-generation lithium-ion batteries. However, the formation of lithium dendrites and the continuous consumption of electrolyte during cycling lead to a serious safety problems. Developing stable lithium metal anode with uniform lithium deposition is highly desirable. Herein, a nitrogen plasma strengthening strategy is proposed for copper oxide nanosheet-decorated Cu foil as an advanced current collector, and deep insights into the plasma regulating mechanism are elaborated. The plasma-treated electrode can maintain a high coulombic efficiency of 99.6% for 500 cycles. The symmetric cell using the lithium-plated electrode can be cycled for more than 600 h with a low-voltage hysteresis (23.1 mV), which is much better than those of electrodes without plasma treatment. It is well confirmed that this plasma-induced nitrogen doping method can provide sufficient active sites for lithium nucleation to enhance the stability of lithium deposition on copper oxide nanosheets decorated on Cu foil and improve the electrical conductivity to greatly reduce the overpotential of the lithium nucleation, which can be extended to other modified current collectors for stable lithium metal anode.

A Simple Electrochemical Route to Access Amorphous Co-Ni Hydroxide for Non-enzymatic Glucose Sensing

Among the numerous transition metal hydroxide materials, cobalt- and nickel-based hydroxides have been extensively studied for their excellent electrochemical performances such as non-enzymatic electrochemical sensors. Binary cobalt-nickel hydroxide has received extensive attention for its exceptionally splendid electrochemical behaviors as a promising glucose sensor material. In this work, we report the synthesis of three-dimensional amorphous Co-Ni hydroxide nanostructures with homogeneous distribution of elements via a simple and chemically clean electrochemical deposition method. The amorphous Co-Ni hydroxide, as a non-enzymatic glucose sensor material, exhibits a superior biosensing performance toward glucose detection for its superior electron transfer capability, high specific surface area, and abundant intrinsic redox couples of Ni2+/Ni3+ and Co2+/Co3+/Co4+ ions. The as-synthesized amorphous Co-Ni hydroxide holds great potential in glucose monitoring and detection as non-enzymatic glucose sensors with high sensitivity 1911.5 μA mM-1 cm-2 at low concentration, wide linear range of 0.00025-1 mM and 1-5 mM, low detection limit of 0.127 μM, super long-term stability, and excellent selectivity in 0.5 M NaOH solution.

A portable micro glucose sensor based on copper-based nanocomposite structure

A sensor device based on a copper-based nanocomposite structure is achieved and presents excellent sensing performance for glucose.

In situ formation of metal–organic framework derived CuO polyhedrons on carbon cloth for highly sensitive non-enzymatic glucose sensing

A facile in situ synthetic strategy to construct MOF-derived porous CuO polyhedrons on carbon cloth for highly sensitive non-enzymatic glucose sensing.

3D Copper Foam-Supported CuCo₂O₄ Nanosheet Arrays as Electrode for Enhanced Non-Enzymatic Glucose Sensing

CuCo₂O₄ anchored on Cu foam (CuCo₂O₄/CF) with polycrystalline features was fabricated by a mild process based on solvothermal reaction and subsequent calcination in this work. The structure and morphology of the obtained materials were thoroughly characterized by X-ray diffraction, X-ray photoelectron spectroscopy, field-emission scanning electron microscopy, and transmission electron microscopy. According to the above analysis, the morphology of the CuCo₂O₄ was nanosheet arrays. Meanwhile, the CuCo₂O₄ was grown on Cu foam successfully. The CuCo₂O₄/CF displayed good electrochemical properties for glucose detection at a linear range from 0 mM to 1.0 mM. Meanwhile, the detection limit was as low as 1 μM (S/N = 3), and the sensitivity was 20,981 μA·mM⁻¹·cm⁻². Moreover, the selectivity and the stability were tested with excellent results. This nanomaterial could show great potential application in electrochemical sensors.

Preparation of Cuprous Oxide Mesoporous Spheres with Different Pore Sizes for Non-Enzymatic Glucose Detection

Mass transfer plays a significant role in a sensor's performance, because the substrate can be detected only when it contacts with the active catalytic surface. In this work, cuprous oxide mesoporous nanospheres (Cu₂O MPNS) with different pore size distributions are fabricated and applied as electrocatalysts for glucose detection. The small pore Cu₂O (SP-Cu₂O, mean pore size of 5.3 nm) and large pore Cu₂O (LP-Cu₂O, mean pore size of 16.4 nm) spheres are prepared by the template method and an etching treatment. The obtained two kinds of Cu₂O MPNS exhibit high porosity with a similar specific surface area of 61.2 and 63.4 (m²·g-1), respectively. The prepared Cu₂O MPNS are used to construct an electrochemical non-enzymatic glucose sensor. The results show that the LP-Cu₂O exhibits better performance than SP-Cu₂O, which illustrates that the internal diffusion takes a great impact on the performance of the sensor. The LP-Cu₂O modified electrode possesses a high and reproducible sensitivity of 2116.9 μA mM-1·cm-2 at the applied potential of 0.6 V with a wide detection range of 0.003-7.8 mM and a low detection limit of 0.42 μM.

Construction of a sensitive non-enzymatic fructose carbon paste electrode – CuO nanoflower: designing the experiments by response surface methodology

CuO nano-flowers were synthesized and used to modify a carbon paste electrode (CPE) for voltammetric determination of fructose.