Olefin metathesis polymerization: Some recent developments in the precise polymerizations for synthesis of advanced materials (by ROMP, ADMET)

New Advances in Covalent Network Polymers via Dynamic Covalent Chemistry

Covalent network polymers, as materials composed of atoms interconnected by covalent bonds in a continuous network, are known for their thermal and chemical stability. Over the past two decades, these materials have undergone significant transformations, gaining properties such as malleability, environmental responsiveness, recyclability, crystallinity, and customizable porosity, enabled by the development and integration of dynamic covalent chemistry (DCvC). In this review, we explore the innovative realm of covalent network polymers by focusing on the recent advances achieved through the application of DCvC. We start by examining the history and fundamental principles of DCvC, detailing its inception and core concepts and noting its key role in reversible covalent bond formation. Then the reprocessability of covalent network polymers enabled by DCvC is thoroughly discussed, starting from the significant milestones that marked the evolution of these polymers and progressing to their current trends and applications. The influence of DCvC on the crystallinity of covalent network polymers is then reviewed, covering their bond diversity, synthesis techniques, and functionalities. In the concluding section, we address the current challenges faced in the field of covalent network polymers and speculates on potential future directions.

Approaching Tryptophan-Derived Polynorbornene Fluorescent Chemosensors: Synthesis, Characterization, and Sensing Ability for Biomedical Applications as Biomarkers for Detecting Fe2+ Ions

We present a novel group of tryptophan (Trp)-based fluorescent polymeric probes synthesized via ring-opening metathesis polymerization (ROMP) of Trp-derived norbornene monomers. These probes, in mono- and disubstituted forms, incorporate amide and ester anchoring groups. The quantity of Trp substituents did not affect fluorescence selectivity but influenced quenching percentage. Poly-diamide-Trp, Poly-monoamide-Trp, Poly-diester-Trp, and Poly-monoester-Trp probes displayed selective detection of Fe2+ and Fe3+ ions with fluorescence on-off characteristics. Poly-diamide-Trp and Poly-monoamide-Trp exhibited a limit of detection (LOD) for Fe2+ and Fe3+ ions of 0.86-11.32 μM, while Poly-diester-Trp and Poly-monoester-Trp showed higher LODs (21.8-108.7 μM). These probes exhibited high selectivity over Fe2+, a crucial metal ion in the body known for its redox properties causing oxidative stress and cell damage. Cell cytotoxicity tests in various cell types confirmed biocompatibility. Additionally, Poly-diamide-Trp displayed excellent cell permeability and iron ion detection in EA.hy926 cells, suggesting potential for bioimaging and clinical applications.

Synthesis of Polyesters Containing Long Aliphatic Methylene Units by ADMET Polymerization and Synthesis of ABA-Triblock Copolymers by One-Pot End Modification and Subsequent Living Ring-Opening Polymerization

The synthesis of high-molecular-weight (Mn up to 62,000 g/mol) polyesters has been achieved by acyclic diene metathesis (ADMET) polymerization of α,ω-dienes prepared from biobased bis(undec-10-enoate) and diols [ethylene glycol (M1), propylene glycol (M2), 1,9-nonanediol (M3), 1,4-benzenedimethanol (M4), and hydroquinone (M5)] using ruthenium-carbene catalysts. Replacement of the solvent during the ADMET polymerization was effective for obtainment of the high-molecular-weight polymers (expressed as P1-P5). The melting temperatures (Tm) in the resultant polyesters were dependent upon the diol (middle) segment employed, and the polymer prepared from M5 exceeded 100 °C (a Tm value of 122.5 °C). The polymerization of M3 and M4 in the presence of 1,4-cis-diacetoxy-2-butene (DAB, as the chain transfer agent) afforded the telechelic polyesters [P3(OAc)2 and P4(OAc)2, respectively] containing acetoxy end groups exclusively. The resultant polymers containing hydroxy group termini [P3(OH)2 and P4(OH)2], prepared by the selective deprotection of the acetoxy end groups, were treated with AlEt3 followed by addition of ε-caprolactone to afford the ABA-type triblock copolymers exclusively, through a living ring-opening polymerization. The depolymerization (hydrolysis) under basic conditions (NaOH aqueous solution) of P3 was explored.

Synthesis of Network Biobased Aliphatic Polyesters Exhibiting Better Tensile Properties than the Linear Polymers by ADMET Polymerization in the Presence of Glycerol Tris(undec-10-enoate)

Development of biobased aliphatic polyesters with better mechanical (tensile) properties in film has attracted considerable attention. This report presents the synthesis of soluble network biobased aliphatic polyesters by acyclic diene metathesis (ADMET) polymerization of bis(undec-10-enyl)isosorbide diester [M1, dianhydro-D-glucityl bis(undec-10-enoate)] in the presence of a tri-arm crosslinker [CL, glycerol tris(undec-10-enoate)] using a ruthenium-carbene catalyst, and subsequent olefin hydrogenation using RhCl(PPh3)3. The resultant polymers, after hydrogenation (expressed as HCP1) and prepared in the presence of 1.0 mol% CL, showed better tensile properties than the linear polymer (HP1) with similar molecular weight [tensile strength (elongation at break): 20.8 MPa (282%) in HP1 vs. 35.4 MPa (572%) in HCP1]. It turned out that the polymer films prepared by the addition of CL during the polymerization (expressed as a 2-step approach) showed better tensile properties. The resultant polymer film also shows better tensile properties than the conventional polyolefins such as linear high density polyethylene, polypropylene, and low density polyethylene.

Functionalized [2.2]Paracyclophanedienes as Monomers for Poly(p-phenylenevinylene)s

Poly(p-phenylenevinylene)s (PPVs) featuring complex side-chains, to date, have only been synthesized by nonliving polymerization methods which have no control over PPV molecular weights, dispersities, or end groups. [2.2]Paracyclophane-1,9-diene (pCpd) has gained attention as a monomer for its ability to be ring-opened to PPV in a living fashion. pCpd, an organic cyclic scaffold with planar chirality, has seen minimal structural diversity due to the harsh reaction conditions required to afford the highly strained compound. Herein, we introduce a general method to overcome this by targeting the synthesis of a monohydroxy-pCpd via mono-demethylation of a dialkoxy-pCpd. The monohydroxy-pCpd can then be functionalized easily, which we demonstrate using three distinct side-chains with four moieties commonly incorporated in conjugated polymers: an alkyl bromide, an oligo(ethylene glycol) chain, an enantiomerically pure side-chain, and a Boc-protected amine. These monofunctionalized-pCpds were investigated as monomers in the ring-opening metathesis polymerization (ROMP) to afford functionalized PPVs in a living manner. The functional-group-containing PPVs are synthesized with full control over their end groups, repeat units, and dispersities. The feasibility of post-polymerization modifications to incorporate any desired moiety to PPV fabricated by this method was demonstrated using an azide-alkyne click reaction. All synthesized PPVs were soluble in organic solvents and display the same fluorescent emission, indicating their conjugated backbones are unaltered.

Synthesis of High Molecular Weight Biobased Aliphatic Polyesters Exhibiting Tensile Properties Beyond Polyethylene

Synthesis of high molecular weight polyesters prepared by acyclic diene metathesis (ADMET) polymerization of bis(undec-10-enoate) with isosorbide (M1), isomannide (M2), and 1,3-propanediol (M3) and the subsequent hydrogenation have been achieved by using a molybdenum-alkylidene catalyst. The resultant polymers (P1) prepared by the ADMET polymerization of M1 (in toluene at 25 °C) possessed high Mn values (Mn = 44400-49400 g/mol), and no significant differences in the Mn values and the PDI (Mw/Mn) values were observed in the samples after the hydrogenation. Both the tensile strength and the elongation at break in the hydrogenated polymers from M1 (HP1) increased upon increasing the molar mass, and the sample with an Mn value of 48200 exhibited better tensile properties (tensile strength of 39.7 MPa, elongation at break of 436%) than conventional polyethylene, polypropylene, as well as polyester containing C18 alkyl chains. The tensile properties were affected by the diol segment employed, whereas HP2 showed a similar property to HP1.

Synthesis of High-Molecular-Weight Biobased Aliphatic Polyesters by Acyclic Diene Metathesis Polymerization in Ionic Liquids

Acyclic diene metathesis (ADMET) polymerization of an α,ω-diene monomer of bis(undec-10-enoate) with isosorbide (M1) using a RuCl₂(IMesH₂)(CH-2-O ⁱ Pr-C₆H₄) (HG2, IMesH₂ = 1,3-bis(2,4,6-trimethylphenyl)imidazolin-2-ylidene) catalyst and conducted at 50 °C (in vacuo) in ionic liquids (ILs) afforded higher-molecular-weight polymers (P1, M _n = 32 200-39 200) than those reported previously (M _n = 5600-14700). 1-n-Butyl-3-methyl imidazolium hexafluorophosphate ([Bmim]PF₆) and 1-n-hexyl-3-methyl imidazolium bis(trifluoromethanesulfonyl)imide ([Hmim]TFSI) were suitable as effective solvents among a series of imidazolium salts and the pyridinium salts. The polymerization of α,ω-diene monomers of bis(undec-10-enoate) with isomannide (M2), 1,4-cyclohexanedimethanol (M3), and 1,4-butanediol (M4) in [Bmim]PF₆ and [Hmim]TFSI also afforded the higher-molecular-weight polymers. The M _n values in the resultant polymers did not decrease even under the scale-up conditions (300 mg to 1.0 g scale, M1, M2, and M4) in the polymerizations in [Hmim]TFSI; the subsequent reaction of P1 with ethylene (0.8 MPa, 50 °C, and 5 h) gave oligomers (proceeded via depolymerization). Tandem hydrogenation of the resultant unsaturated polymers (P1) in a [Bmim]PF₆-toluene biphasic system upon the addition of Al₂O₃ (1.0 MPa H₂ at 50 °C) gave the corresponding saturated polymers (HP1), which waswere isolated by a phase separation in the toluene layer. The [Bmim]PF₆ layer containing the ruthenium catalyst could be recycled without a decrease in the activity/selectivity of the olefin hydrogenation at least eight times.

Practical Route for Catalytic Ring-Opening Metathesis Polymerization

Norbornene derivatives are typical monomers for ring-opening metathesis polymerization (ROMP) for synthesizing highly functional polymers. However, the lack of catalytic methods, that is, the lack of readily available chain transfer agents (CTAs) for these monomers has been a significant cost limitation when large-scale syntheses are required. Here, we report commercially available styrene and its derivatives as efficient regioselective CTAs for the catalytic synthesis of metathesis polymers requiring up to 1000 times less ruthenium than in classical ROMP experiments. The molecular weight of the synthesized polymers was controlled by the monomer-to-CTA ratio. Low molecular weight ROMP polymers known for their antimicrobial properties were also synthesized on a gram scale in this report. Polymers were characterized by SEC, ¹H NMR spectroscopy, and isotopically resolved MALDI-TOF MS. This approach describes a greener, more cost-effective, and eco-friendly methodology for the preparation of metathesis-based materials on the multigram scale.

Chain transfer agents for the catalytic ring opening metathesis polymerization of norbornenes

Here, we present a detailed study of the metathesis activity of conjugated 1,3 diene derivatives in ring opening metathesis polymerization (ROMP) using Grubbs' 3rd generation catalyst (G3). A comprehensive screening of those derivatives revealed that monosubstituted 1,3 dienes show similar reactivities towards G3-alkylidenes as norbornene derivatives. Therefore, they represent perfect candidates for chain transfer agents in a kinetically controlled catalytic ROMP. This unprecedented reactivity allowed us to catalytically synthesize mono-end-functional poly(norborneneimide)s on the gram scale. Much more complex architectures such as star-shaped polymers could also be synthesized catalytically for the very first time via ROMP. This inexpensive and greener route to produce telechelic ROMP polymers was further utilized to synthesize ROMP block copolymers using bifunctional ROMP and ATRP/NCL initiators. Finally, the regioselective reaction of G3 with 1,3 diene derivatives was also exploited in the synthesis of a ROMP-PEG diblock copolymer initiated from a PEG macroinitiator.

Synthesis and Characterization of Thiol-Functionalized Polynorbornene Dicarboximides for Heavy Metal Adsorption from Aqueous Solution

The contamination of water resources with heavy metals is a very serious concern that demands prompt and effective attention due to the serious health risks caused by these contaminants. The synthesis and ring-opening metathesis polymerization (ROMP) of norbornene dicarboximides bearing thiol pendant groups, specifically, N-4-thiophenyl-exo-norbornene-5,6-dicarboximide (1a), N-4-(methylthio)phenyl-exo-norbornene-5,6-dicarboximide (1b) and N-4-(trifluoromethylthio)phenyl-exo-norbornene-5,6-dicarboximide (1c), as well as their assessment for the removal of heavy metals from aqueous systems, is addressed in this work. The polymers were characterized by NMR, SEM and TGA, among others. Single and multicomponent aqueous solutions of Pb²⁺, Cd²⁺ and Ni²⁺ were employed to perform both kinetic and isothermal adsorption studies taking into account several experimental parameters, for instance, the initial metal concentration, the contact time and the mass of the polymer. In general, the adsorption kinetic data fit the pseudo-second-order model more efficiently, while the adsorption isotherms fit the Freundlich and Langmuir models. The maximum metal uptakes were 53.7 mg/g for Pb²⁺, 43.8 mg/g for Cd²⁺ and 29.1 mg/g for Ni²⁺ in the SH-bearing polymer 2a, 46.4 mg/g for Pb²⁺, 32.9 mg/g for Cd²⁺ and 27.1 mg/g for Ni²⁺ in the SCH₃-bearing polymer 2b and 40.3 mg/g for Pb²⁺, 35.9 mg/g for Cd²⁺ and 27.8 mg/g for Ni²⁺ in the SCF₃-bearing polymer 2c, correspondingly. The better performance of polymer 2a for the metal uptake was ascribed to the lower steric hindrance and higher hydrophilicity imparted by -SH groups to the polymer. The results show that these thiol-functionalized polymers are effective adsorbents of heavy metal ions from aqueous media.

Pulsed-Addition ROMP: Catalytic Syntheses of Heterotelechelic Polymers via Regioselective Chain Transfer Agents

Regioselective chain transfer agents are used to synthesize narrowly dispersed heterotelechelic polymers with a 15-fold decrease in catalyst consumption using the pulsed addition ROMP (PA-ROMP) technique. The commercially available Grubbs' third-generation catalyst (G3) is easily prefunctionalized with chain transfer agents in a short reaction time (30 min). After addition and consumption of a monomer, the excess chain transfer agent in the reaction medium end-functionalizes the polymer chain and regenerates the initiator very quickly (within 10 min) via a ring-opening-ring-closing sequence. This regenerated catalyst then initiates the polymerization of a subsequent batch of monomers, and the process is iterated for 15 times. Excellent control over molecular weight and dispersity from SEC analyses (over 15 pulses) confirmed the high efficacy of the chain transfer agents under this PA-ROMP method. The chain transfer agents are also extremely compatible with the synthesis of high molecular weight polymers (M/C = 150) with minimal catalyst decomposition. ¹H NMR as well as MALDI-ToF mass spectrometry further confirmed the high degree of chain end functionalization of the synthesized polymers.

Star-Shaped ROMP Polymers Coated with Oligothiophenes That Exhibit Unique Emission

A series of oligo(thiophene)-modified "soluble" star-shaped ring-opening metathesis polymerization (ROMP) polymers were prepared by sequential living ROMP of norbornene and a cross-linking agent using a molybdenum-alkylidene catalyst, followed by Wittig-type coupling for termination with oligo(thiophene) carboxaldehydes. The resultant star-shaped ROMP polymers displayed unique emission properties affected by the core size and arm repeat units as well as the kind of oligothiophene coated. The effects of the thiophene groups on photophysical properties of star-shaped/linear polymers were studied via time-resolved fluorescence spectroscopy. Fluorescence lifetimes were determined in THF as 400, 640, 730, and 820 ps for Star 3TPh, Linear 3TPh, Star 4T, and Linear 4T, respectively. A significant enhancement of the nonradiative rate constants k _nr in the star-shaped polymers results in relatively lower fluorescence quantum yields and shorter fluorescence lifetimes compared to the corresponding linear polymers.

Sidechain Metallopolymers with Precisely Controlled Structures: Synthesis and Application in Catalysis

Inspired by the cooperative multi-metallic activation in metalloenzyme catalysis, artificial enzymes as multi-metallic catalysts have been developed for improved kinetics and higher selectivity. Previous models about multi-metallic catalysts, such as cross-linked polymer-supported catalysts, failed to precisely control the number and location of their active sites, leading to low activity and selectivity. In recent years, metallopolymers with metals in the sidechain, also named as sidechain metallopolymers (SMPs), have attracted much attention because of their combination of the catalytic, magnetic, and electronic properties of metals with desirable mechanical and processing properties of polymeric backbones. Living and controlled polymerization techniques provide access to SMPs with precisely controlled structures, for example, controlled degree of polymerization (DP) and molecular weight dispersity (Đ), which may have excellent performance as multi-metallic catalysts in a variety of catalytic reactions. This review will cover the recent advances about SMPs, especially on their synthesis and application in catalysis. These tailor-made SMPs with metallic catalytic centers can precisely control the number and location of their active sites, exhibiting high catalytic efficiency.

Repurposing Mitsunobu Reactions as a Generic Approach toward Polyethylene Derivatives

Broad scope of functionality and controllable degree of functionalization are intriguing goals for the development of polar-group-functionalized polyethylene materials. Herein, we propose a generic strategy of using widely available starting materials (i.e., poly(ethylene-co-vinyl acetate), EVA) and mild Mitsunobu functionalization conditions to prepare over 30 polyethylene derivatives. No noble transition metal catalysts (e.g., Ru, Mo, Pd, etc.) or corrosive/explosive reagents (e.g., HBr, NaN₃, C₂H₄, H₂, etc.) are used in the synthesis, while functional groups such as azide, aldehyde, norbornene, and thiol can be easily installed, with tunable content as high as 18 mol %. Using this practical method, we successfully prepared polyethylene-derivatized membranes with excellent antimicrobial and fluorescent properties.

Preparation of Recyclable and Versatile Porous Poly(aryl thioether)s by Reversible Pd-Catalyzed C-S/C-S Metathesis

Porous organic materials (polymers and COFs) have shown a number of promising properties; however, the lability of their linkages often limits their robustness and can hamper downstream industrial application. Inspired by the outstanding chemical, mechanical, and thermal resistance of the 1D polymer poly(phenylene sulfide) (PPS), we have designed a new family of porous poly(aryl thioether)s, synthesized via a mild Pd-catalyzed C–S/C–S metathesis-based method, that merges the attractive features common to porous polymers and PPS in a single material. In addition, the method is highly modular, allowing to easily introduce application-oriented functionalities in the materials for a series of environmentally relevant applications including metal capture, metal sensing, and heterogeneous catalysis. Moreover, despite their extreme chemical resistance, the polymers can be easily recycled to recover the original monomers, offering an attractive perspective for their sustainable use. In a broader context, these results clearly demonstrate the untapped potential of emerging single-bond metathesis reactions in the preparation of new, recyclable materials.

One-Pot Heterotelechelic Metathesis Polymers via Regioselective Chain Transfer Agents

Single chain transfer agents are used to synthesize narrowly distributed heterotelechelic ROMP polymers in one pot, exploiting a new mechanistic and synthetic approach. The chain transfer agents carrying different functional groups are synthesized in a few straightforward steps. Prefunctionalization of commercially available Grubbs' third-generation catalyst is realized in situ using regioselective chain transfer agents within a short reaction period. After monomer consumption, the excess chain transfer agent in the reaction medium automatically end-functionalizes the polymer chain, yielding a heterotelechelic polymer via a ring-opening-ring-closing sequence. ¹H NMR, MALDI-ToF, and SEC analyses confirmed end-group functionalization as well as excellent control over molecular weight and dispersity. This strategy highlights a new way of synthesizing one-pot heterotelechelic ROMP polymers straightforwardly and efficiently.

Red Light-Emitting Water-Soluble Luminescent Iridium-Containing Polynorbornenes: Synthesis, Characterization and Oxygen Sensing Properties in Biological Tissues In Vivo

New water-soluble polynorbornenes P1-P4 containing oligoether, amino acid groups and luminophoric complexes of iridium(III) were synthesized by ring-opening metathesis polymerization. The polymeric products in organic solvents and in water demonstrate intense photoluminescence in the red spectral region. The polymers P1 and P3 with 1-phenylisoquinoline cyclometalating ligands in iridium fragments reveal 4-6 fold higher emission quantum yields in solutions than those of P2 and P4 that contain iridium complexes with 1-(thien-2-yl)isoquinoline cyclometalating ligands. The emission parameters of P1-P4 in degassed solutions essentially differ from those in the aerated solutions showing oxygen-dependent quenching of phosphorescence. Biological testing of P1 and P3 demonstrates that the polymers do not penetrate into live cultured cancer cells and normal skin fibroblasts and do not possess cytotoxicity within the concentrations and time ranges reasonable for biological studies. In vivo, the polymers display longer phosphorescence lifetimes in mouse tumors than in muscle, as measured using phosphorescence lifetime imaging (PLIM), which correlates with tumor hypoxia. Therefore, preliminary evaluation of the synthesized polymers shows their suitability for noninvasive in vivo assessments of oxygen levels in biological tissues.

Synthesis of Semicrystalline Long Chain Aliphatic Polyesters by ADMET Copolymerization of Dianhydro-D-glucityl bis(undec-10-enoate) with 1,9-Decadiene and Tandem Hydrogenation

Acyclic diene metathesis (ADMET) copolymerization of dianhydro-D-glucityl bis(undec-10-enoate) (M1) with 1,9-decadiene (DCD) using ruthenium-carbene catalyst, RuCl2(IMesH2)(CH-2-OiPr-C6H4) [IMesH2 = 1,3-bis(2,4,6-trimethylphenyl)imidazolin-2-ylidene, HG2], afforded unsaturated polyesters (Mn = 9300–23,400) under the optimized conditions. Subsequent tandem hydrogenation (H2 1.0 MPa, 50 °C) with the addition of a small amount of Al2O3 resulted in the saturated polymers having a melting temperature of 71.7–107.6 °C, depending on the molar ratio of M1 and DCD.

Oxanorbornenes: promising new single addition monomers for the metathesis polymerization

Higher ring-opening metathesis propagation rates of exo-norbornene derivatives over endo derivatives are well established in the literature. Here, we report for the first time that endo-isomers of oxanorbornene derivatives show higher reactivity towards ring-opening metathesis with Grubbs' 3rd generation catalyst (G3) than the corresponding exo-isomers. A very high selectivity for the reaction of G3 with endo over the exo-isomers could be shown. Furthermore, single molecular addition of the endo-isomers with G3 was observed. On the other hand, pure exo-monomers could successfully be homopolymerized. Mixtures of exo- and endo- monomers, however, prevented the homopolymerization of the exo-monomer. Such mixtures could successfully be copolymerized with cycloalkenes, resulting in alternating copolymers. An oxanorbornadiene derivative could be shown to undergo single addition reactions, exploited in the preparation of mono-end functional ROMP polymers. These could be selectively derivatized via endgroup selective thiol-ene click reactions. A thiol and alcohol end functional ROMP polymer was synthesized, and the efficient end functionalization was confirmed by 1H NMR spectroscopy and MALDI-ToF spectrometry.

Aryl radical initiators accumulated within layered silicates realize polystyrene with directly and regioselectively bonded aryl-terminal groups

The arbitrary design of a terminal group of polymers exploits the still-veiled functions of polymers with potential for application in fields such as drug delivery systems, photonics, and energy conversions. Here we demonstrate for the first time that polystyrenes with directly and regioselectively bonded aryl-terminal groups can be obtained via styrene radical polymerization initialized by arbitrary aryl radicals accumulated within the interlayer space of smectite clay minerals, which can be prepared by our developed 'Clay Catalysed ab intra Deamination (CCD)' method.

Observation of Intramolecular Interaction in Fluorescent Star-Shaped Polymers: Evidence for Energy Hopping between Branch Chains

Time-resolved fluorescence anisotropy measurements were performed on three-branched star-shaped polymers, based on precisely synthesized poly(9,9-di-n-octyl-fluorene vinylene)s containing C₆F₅ end groups. The star-shaped polymers showed identical fluorescence spectra, fluorescence lifetimes, and quantum yields to those of the reference single-chain oligomer. However, a rapid fluorescence anisotropy decay was observed in two kinds of star-shaped polymers, while such decay was not seen in the corresponding single-chain oligomer. On the basis of the analysis using an incoherent hopping model, the observed rapid anisotropy decay is attributable to energy hopping processes between branches within a single polymer species, and its rate was deduced to be ca.100 ps depending upon the core part.

Synthesis of Biobased Long-Chain Polyesters by Acyclic Diene Metathesis Polymerization and Tandem Hydrogenation and Depolymerization with Ethylene

Acyclic diene metathesis (ADMET) polymerization of biobased α,ω-dienes of bis(undec-10-enoate) with diols (1,4-butanediol, isosorbide, isomannide, and 1,4-cyclohexanedimethanol) afforded high-molecular weight unsaturated polyesters, and subsequent tandem hydrogenation (H2 1.0 MPa, 50 °C, 3 h) gave the saturated polymers upon addition of a small amount of Al2O3 (1.0-1.7 wt %). Subsequent reaction of the unsaturated polymers with ethylene afforded the oligomers (by depolymerization and degradation).