RGD-modified dextran hydrogel promotes follicle growth in three-dimensional ovarian tissue culture in mice

Infertility treatment using polysaccharides-based hydrogels: new strategies in tissue engineering and regenerative medicine

Infertility is a primary health issue affecting about 15% of couples of reproductive ages worldwide, leading to physical, mental, and social challenges. Advances in nanobiotechnology and regenerative medicine are opening new therapeutic horizons for infertility by developing polysaccharide-based nanostructured biomaterials. This review explores the role of tissue engineering and regenerative medicine in infertility treatment, explicitly focusing on the promising potential of polysaccharide-based hydrogels. In this context, using these biomaterials offers unique advantages, including biodegradability, biocompatibility, and the ability to mimic the natural endometrial microenvironment, making them highly effective for applications in endometrial regeneration, ovarian tissue engineering, spermatogenesis support, and controlled drug delivery. This review discusses the various properties and uses of polysaccharide-based hydrogels, like alginate, hyaluronic acid, and chitosan, in helping to restore reproductive function. While these materials hold great promise, some notable challenges to their clinical use include issues like rapid degradation, mechanical instability, and potential immune reactions. Future research should focus on developing hybrid hydrogels, investigating advanced fabrication techniques, and testing these materials in clinical settings. By combining findings from recent studies, this review aims to provide a solid foundation for researchers and clinicians looking to discover new and effective strategies for treating infertility, ultimately connecting research efforts with practical applications in healthcare.

RGD peptide promotes follicle growth through integrins αvβ3/αvβ5 in three-dimensional culture

In brief

Three-dimensional ovarian tissue culture is a unique model to define the effects of molecules on folliculogenesis. Using this model, we determined that RGD-integrin interaction plays a role in antrum formation and theca cell differentiation.

Abstract

We recently developed a three-dimensional (3D) ovarian tissue culture system supported by bacterial-derived dextran hydrogel. Arg-Gly-Asp (RGD) is an extracellular matrix-derived triple peptide. Immature ovarian tissues cultured in RGD-modified dextran hydrogel significantly promoted antral follicle growth and oocyte quality compared with those cultured in dextran hydrogel alone. In this study, we examined the mechanism of follicle growth stimulated by RGD treatment in the 3D system. First, we detected that direct contact between RGD-modified dextran hydrogel and ovarian interstitial cells is necessary to promote antral follicle growth. Therefore, we hypothesized that RGD stimulates antral follicle growth through RGD-binding integrin receptors expressed in the interstitial cell mass. Using quantitative PCR (qPCR) and immunochemical staining, we identified that integrins ⍺vβ3 and ⍺v5 are predominantly expressed in the ovarian interstitial compartment. To assess the effect of RGD-integrin interaction on follicle growth, ovarian tissues were cultured with cilengitide (Ci), an inhibitor specific for ⍺vβ3 and ⍺vβ5. Ci treatment suppressed RGD-induced follicle growth and oocyte quality in a dose-dependent manner. When the interstitial cell aggregates were cultured with RGD, cell migration and theca-related gene expression were significantly upregulated. Ci treatment dramatically suppressed these RGD-induced activities. In coculturing the interstitial aggregate and secondary follicles with RGD, migrating cells formed the outermost cell layers around the follicles, like theca layers, which were totally blocked by Ci treatment. In conclusion, our results suggest that RGD stimulates theca cell differentiation in the ovarian interstitial cells through integrins ⍺vβ3 and ⍺v5 to promote antral follicle growth in our 3D system.

In vitro gametogenesis: Towards competent oocytes: Limitations and future improvements for generating oocytes from pluripotent stem cells in culture

Production of oocytes from pluripotent cell cultures in a dish represents a new paradigm in stem cell and developmental biology and has implications for how we think about life. The spark of life for the next generation occurs at fertilization when sperm and oocyte fuse. In animals, gametes are the only cells that transmit their genomes to the next generation. Oocytes contain in addition a large cytoplasm with factors that direct embryonic development. Reconstitution of mouse oocyte and embryonic development in culture provides experimental opportunities and facilitates an unprecedented understanding of molecular mechanisms. However, the application of in vitro gametogenesis to reproductive medicine or infertility treatment remains challenging. One significant concern is the quality of in vitro-derived oocytes. Here, we review the current understanding and identify limitations in generating oocytes in vitro. From this basis, we explore opportunities for future improvements of the in vitro approach to generating high-quality oocytes.

In Vitro Development of Mouse Preantral Follicle with Using Amniotic Membrane Extract-Loaded Hydrogels

An artificial ovary based on the alginate (ALG) hydrogel has been widely implemented to preserve prepubertal female fertility. However, this platform is not fully capable of successful an ovary microenvironment simulation for follicle development, holding great potential for its improvement. Therefore, this experimental study aimed to evaluate the effect of an amniotic membrane extract (AME) -loaded hydrogel on the mouse preantral follicles in vitro development. In order to have better follicle development, first, the impact of different concentrations of follicle-stimulating hormone (FSH) was evaluated on the mouse preantral follicles encapsulated in ALG. Later, the appropriate dose was adjusted for the follicles encapsulated in the ALG-AME hydrogel. Results demonstrated that 100 mIU/ml FSH showed a significant follicle survival rate compared with 10 mIU/ml FSH (P=0.005). According to MTT assay finding, the rate of weight loss, and rheology evaluations, ALG containing 1 mg/ml AME was identified as an optimal sample of follicle culture instead of other AME concentrations. Follicle diameter significantly increased in the ALG-AME 1 hydrogel compared with the ALG control group without AME (P=0.027). The storage modulus of ALG-AME 1 was 773 Pa and retained the follicle morphology for 13 days. No statistically substantial difference was seen in survival, antrum cavity formation, and competent oocyte in terms of the normal chromosomal arrangement and meiotic spindle rate in comparison with the control group. It can be concluded that ALG-AME 1 could not significantly impact the mouse preantral follicle.

Pronuclear transfer rescues poor embryo development of in vitro-grown secondary mouse follicles

STUDY QUESTION

Is pronuclear transfer (PNT) capable of restoring embryo developmental arrest caused by cytoplasmic inferiority of in vitro-grown (IVG) mouse oocytes?

SUMMARY ANSWER

PNT to in vivo matured cytoplasm significantly improved embryo development of IVG mouse oocytes, leading to living, fertile offspring.

WHAT IS KNOWN ALREADY

In vitro follicle culture has been considered as a fertility preservation option for cancer patients. Studies describing the culture of human follicles remain scarce, owing to low availability of tissue. Mouse models have extensively been used to study and optimize follicle culture. Although important achievements have been accomplished, including the production of healthy offspring in mice, IVG oocytes are of inferior quality when compared to in vivo-grown oocytes, likely because of cytoplasmic incompetence.

STUDY DESIGN SIZE DURATION

The study was carried out from September 2020 to February 2022. In total, 120 15-day-old B6D2 mice were used to perform secondary follicle culture and assess the quality of IVG oocytes. In vivo-grown control oocytes were obtained from 85 8- to 12-week-old B6D2 mice, following ovarian stimulation. For sperm collection, four B6D2 males between 10 and 14 weeks old were used. For embryo transfer, 14 8- to 12-week-old CD1 females served as surrogate mothers and 10 CD1 vasectomized males 10-24 weeks old were used to generate pseudo-pregnant females. Finally, for mating, four B6D2 female mice aged 8-10 weeks and two B6D2 male mice aged 10 weeks old were used to confirm the fertility of nuclear transfer (NT)-derived pups.

PARTICIPANTS/MATERIALS SETTING METHODS

Secondary follicles from 15-day-old B6D2 mice were isolated from the ovaries and cultured for 9 days, before a maturation stimulus was given. Following 16-18 h of maturation, oocytes were collected and evaluated on maturation rate, oocyte diameter, activation rate, spindle morphology, calcium-releasing ability, and mitochondrial membrane potential. For every experiment, in vivo-grown oocytes were used as a control for comparison. When cytoplasmic immaturity and poor embryo development were confirmed in IVG oocytes, PNT was performed. For this, the pronuclei from IVG oocytes, created following parthenogenetic activation and IVF, were transferred to the cytoplasm of fertilized, in vivo-grown oocytes. Genetic analysis and embryo transfer of the generated embryos were implemented to confirm the safety of the technique.

MAIN RESULTS AND THE ROLE OF CHANCE

Following 9 days of follicle culture, 703 oocytes were collected, of which 76% showed maturation to the metaphase II stage. Oocyte diameters were significantly lower in IVG oocytes, measuring 67.4 μm versus 73.1 μm in controls (P < 0.001). Spindle morphology did not differ significantly between IVG and control oocytes, but calcium-releasing ability was compromised in the IVG group. An average calcium release of 1.62 arbitrary units was observed in IVG oocytes, significantly lower than 5.74 in control oocytes (P < 0.001). Finally, mitochondrial membrane potential was inferior in IVG compared to the control group, reaching an average value of 0.95 versus 2.27 (P < 0.001). Developmental potential of IVG oocytes was assessed following parthenogenetic activation with strontium chloride (SrCl2). Only 59.4% of IVG oocytes cleaved to two cells and 36.3% reached the blastocyst stage, significantly lower than 89.5% and 88.2% in control oocytes, respectively (P < 0.001 and 0.001). Both PNT and spindle transfer (ST) were explored in pilot experiments with parthenogenetically activated oocytes, as a means to overcome poor embryo development. After the added value of NT was confirmed, we continued with the generation of biparental embryos by PNT. For this purpose, IVG and control oocytes first underwent IVF. Only 15.5% of IVG oocytes were normally fertilized, in contrast to 45.5% in controls (P < 0.001), with resulting failure of blastocyst formation in the IVG group (0 versus 86.2%, P < 0.001). When the pronuclei of IVG zygotes were transferred to the cytoplasm of control zygotes, the blastocyst rate was restored to 86.9%, a similar level as the control. Genetic analysis of PNT embryos revealed a normal chromosomal profile, to a rate of 80%. Finally, the generation of living, fertile offspring from PNT was possible following embryo transfer to surrogate mothers.

LARGE-SCALE DATA

N/A.

LIMITATIONS REASONS FOR CAUTION

Genetic profiles of analysed embryos from PNT originate from groups that are too small to draw concrete conclusions, whilst ST, which would be the preferred NT approach, could not be used for the generation of biparental embryos owing to technical limitations. Even though promising, the use of PNT should be considered as experimental. Furthermore, results were acquired in a mouse model, so validation of the technique in human IVG oocytes needs to be performed to evaluate the clinical relevance of the technology. The genetic profiles from IVG oocytes, which would be the ultimate characterization for chromosomal abnormalities, were not analysed owing to limitations in the reliable analysis of single cells.

WIDER IMPLICATIONS OF THE FINDINGS

PNT has the ability to overcome the poor cytoplasmic quality of IVG mouse oocytes. Considering the low maturation efficiency of human IVG oocytes and potential detrimental effects following long-term in vitro culture, NT could be applied to rescue embryo development and could lead to an increased availability of good quality embryos for transfer.

STUDY FUNDING/COMPETING INTERESTS

A.C. is a holder of FWO (Fonds voor Wetenschappelijk Onderzoek) grants (1S80220N and 1S80222N). B.H. and A.V.S. have been awarded with a special BOF (Bijzonder Onderzoeksfonds), GOA (Geconcerteerde onderzoeksacties) 2018000504 (GOA030-18 BOF) funding. B.H. has been receiving unrestricted educational funding from Ferring Pharmaceuticals (Aalst, Belgium). The authors declare that they have no conflict of interest.

Engineering of ovarian tissue for ovarian dysfunctions: A review

This review explores tissue engineering as a potential solution for reproductive health issues in women caused by genetic or acquired diseases, such as premature ovarian failure or oophorectomy. The loss of ovarian function can lead to infertility, osteoporosis, and cardiovascular disease. Hormone replacement therapy is a common treatment, but it has limitations and risks. The review focuses on two main approaches in tissue engineering: scaffold-based (3D printing, electrospinning, decellularization) and scaffold-free (stem cell transplantation, organoid cultivation). Both approaches show promise in preclinical studies for creating functional ovarian tissue. Challenges include vascularization, innervation, long-term function, and safety. Despite these challenges, tissue engineering offers a potential avenue for restoring fertility and hormone balance in women with ovarian dysfunction.

Past, present and future of biomedical applications of dextran-based hydrogels: A review

This review extensively surveys the biomedical applications of hydrogels containing dextran. Dextran has gained much attention as a biomaterial due to its distinctive properties such as biocompatibility, non-toxicity, water solubility and biodegradability. It has emerged as a critical constituent of hydrogels for biomedical applications including drug delivery devices, tissue engineering scaffolds and biosensor materials. The benefits, challenges and potential prospects of dextran-based hydrogels as biomaterials are highlighted in this review.

Dextran Formulations as Effective Delivery Systems of Therapeutic Agents

Dextran is by far one of the most interesting non-toxic, bio-compatible macromolecules, an exopolysaccharide biosynthesized by lactic acid bacteria. It has been extensively used as a major component in many types of drug-delivery systems (DDS), which can be submitted to the next in-vivo testing stages, and may be proposed for clinical trials or pharmaceutical use approval. An important aspect to consider in order to maintain high DDS' biocompatibility is the use of dextran obtained by fermentation processes and with a minimum chemical modification degree. By performing chemical modifications, artefacts can appear in the dextran spatial structure that can lead to decreased biocompatibility or even cytotoxicity. The present review aims to systematize DDS depending on the dextran type used and the biologically active compounds transported, in order to obtain desired therapeutic effects. So far, pure dextran and modified dextran such as acetalated, oxidised, carboxymethyl, diethylaminoethyl-dextran and dextran sulphate sodium, were used to develop several DDSs: microspheres, microparticles, nanoparticles, nanodroplets, liposomes, micelles and nanomicelles, hydrogels, films, nanowires, bio-conjugates, medical adhesives and others. The DDS are critically presented by structures, biocompatibility, drugs loaded and therapeutic points of view in order to highlight future therapeutic perspectives.

Insights into the Role of Natural Polysaccharide-Based Hydrogel Wound Dressings in Biomedical Applications

Acute skin damage caused by burns or cuts occurs frequently in people's daily lives. Such wounds are difficult to heal normally and have persistent inflammation. Wound dressings not only improve the speed of wound healing, but also protect and cover the wound well. Hydrogels have the characteristics of good flexibility, high water content, and good biocompatibility, and are widely used in biomedicine and other fields. Common hydrogels are mainly natural hydrogels and synthetic hydrogels. Hydrogels cross-linked using different raw materials and different methods have different performance characteristics. Natural hydrogels prepared using polysaccharides are simple to obtain and have good biocompatibility, but are inferior to synthetic hydrogels in terms of mechanical properties and stability, and a single polysaccharide hydrogel cannot meet the component requirements for wound healing. Therefore, functional composite hydrogels with high mechanical properties, high biocompatibility, and high antibacterial properties are the current research hotspots. In this review, several common polysaccharides for hydrogel synthesis and the synthesis methods of polysaccharide hydrogels are introduced, and functional composite hydrogel dressings from recent years are classified. It is hoped that this can provide useful references for relevant research in this field.