Recent advances in the application of pulsed light processing for improving food safety and increasing shelf life

Comparing resistance of bacterial spores and fungal conidia to pulsed light and UVC radiation at a wavelength of 254 nm

Pulsed light (PL) inactivates microorganisms by UV-rich, high-irradiance and short time pulses (250 μs) of white light with wavelengths from 200 nm to 1100 nm. PL is applied for disinfection of food packaging material and food-contact equipment. Spores of seven Bacillus ssp. strains and one Geobacillus stearothermophilus strain and conidia of filamentous fungi (One strain of Aspergillus brasiliensis, A. carbonarius and Penicillium rubens) were submitted to PL (fluence from 0.23 J/cm2 to 4.0 J/cm2) and UVC (at λ = 254 nm; fluence from 0.01 J/cm2 to 3.0 J/cm2). One PL flash at 3 J/cm2 allowed at least 3 log-reduction of all tested microorganisms. The emetic B. cereus strain F4810/72 was the most resistant of the tested spore-forming bacteria. The PL fluence to 3 log-reduction (F3 PL) of its spores suspended in water was 2.9 J/cm2 and F3 UVC was 0.21 J/cm2, higher than F3 PL and F3 UVC of spores of B. pumilus SAFR-032 2.0 J/cm2 and 0.15 J/cm2, respectively), yet reported as a highly UV-resistant spore-forming bacterium. PL and UVC sensitivity of bacterial spores was correlated. Aspergillus spp. conidia suspended in water were poorly sensitive to PL. In contrast, PL inactivated Aspergillus spp. conidia spread on a dry surface more efficiently than UVC. The F2 PL of A. brasiliensis DSM1988 was 0.39 J/cm2 and F2 UVC was 0.83 J/cm2. The resistance of spore-forming bacteria to PL could be reasonably predicted from the knowledge of their UVC resistance. In contrast, the sensitivity of fungal conidia to PL must be specifically explored.

Effect of UV LED and Pulsed Light Treatments on Polyphenol Oxidase Activity and Escherichia coli Inactivation in Apple Juice

Enzymatic browning in fruits and vegetables, driven by polyphenol oxidase (PPO) activity, results in color changes and loss of bioactive compounds. Emerging technologies are being explored to prevent this browning and ensure microbial safety in foods. This study assessed the effectiveness of pulsed light (PL) and ultraviolet light-emitting diodes (UV-LED) in inhibiting PPO and inactivating Escherichia coli ATTC 25922 in fresh apple juice (Malus domestica var. Red Delicious). Both treatments' effects on juice quality, including bioactive compounds, color changes, and microbial inactivation, were examined. At similar doses, PL-treated samples (126 J/cm2) showed higher 2,2- diphenyl-1-picrylhydrazyl inhibition (9.5%) compared to UV-LED-treated samples (132 J/cm2), which showed 1.06%. For microbial inactivation, UV-LED achieved greater E. coli reduction (>3 log cycles) and less ascorbic acid degradation (9.4% ± 0.05) than PL. However, increasing PL doses to 176 J/cm2 resulted in more than 5 log cycles reduction of E. coli, showing a synergistic effect with the final temperature reached (55 °C). The Weibull model analyzed survival curves to evaluate inactivation kinetics. UV-LED was superior in preserving thermosensitive compounds, while PL excelled in deactivating more PPO and achieving maximal microbial inactivation more quickly.

One Health Perspectives on Food Safety in Minimally Processed Vegetables and Fruits: From Farm to Fork

While food markets and food production chains are experiencing exponential growth, global attention to food safety is steadily increasing. This is particularly crucial for ready-to-eat products such as fresh-cut salads and fruits, as these items are consumed raw without prior heat treatment, making the presence of pathogenic microorganisms quite frequent. Moreover, many studies on foodborne illnesses associated with these foods often overlook the transmission links from the initial contamination source. The prevention and control of the dissemination of foodborne pathogens should be approached holistically, involving agricultural production, processing, transport, food production, and extending to final consumption, all while adopting a One Health perspective. In this context, our objective is to compile available information on the challenges related to microbiological contamination in minimally handled fruits and vegetables. This includes major reported outbreaks, specific bacterial strains, and associated statistics throughout the production chain. We address the sources of contamination at each stage, along with issues related to food manipulation and disinfection. Additionally, we provide potential solutions to promote a healthier approach to fresh-cut fruits and vegetables. This information will be valuable for both researchers and food producers, particularly those focused on ensuring food safety and quality.

Effect of pulsed light on myofibrillar protein of large yellow croaker (Pseudosciaena crocea) during refrigerated storage

This study mainly evaluated the effect of different energies of pulsed light (PL) treatment (100, 200, 300, 400, and 500 J/pulse) on myofibrillar protein (MP) of large yellow croaker during refrigerated storage. The results showed that PL treatment would cause a certain degree of oxidation to the MP of large yellow croaker at the initial stage, which showed that the total sulfhydryl content of the protein decreased, the carbonyl content and the average particle size increased, and the β-sheet to β-turn transformation, the tertiary structure of the protein unfolds, and the hydrophobic groups were exposed, causing the reduction of intrinsic fluorescence intensity. However, subsequent storage studies found that PL treatment could slow down the oxidation rate of MP. The decrease rate of total sulfhydryl content and the increase rate of carbonyl content in the 300 J/pulse group were both reduced by about 1.7 times compared with the control group. At the same time, the PL treatment with this intensity could also better protect the secondary structure, tertiary structure, and microstructure of MP. This study provided theoretical basis and reference for analyzing the quality change rule and mechanism of large yellow croaker during refrigerated storage after PL treatment. Studies have shown that PL treatment can reduce the adverse changes of MP in large yellow croaker during cold storage.

Recent developments in applications of physical fields for microbial decontamination and enhancing nutritional properties of germinated edible seeds and sprouts: a review

Germinated edible seeds and sprouts have attracted consumers because of their nutritional values and health benefits. To ensure the microbial safety of the seed and sprout, emerging processing methods involving physical fields (PFs), having the characteristics of high efficiency and environmental safety, are increasingly proposed as effective decontamination processing technologies. This review summarizes recent progress on the application of PFs to germinating edible seeds, including their impact on microbial decontamination and nutritional quality and the associated influencing mechanisms in germination. The effectiveness, application scope, and limitation of the various physical techniques, including ultrasound, microwave, radio frequency, infrared heating, irradiation, pulsed light, plasma, and high-pressure processing, are symmetrically reviewed. Good application potential for improving seed germination and sprout growth is also described for promoting the accumulation of bioactive compounds in sprouts, and subsequently enhancing the antioxidant capacity under favorable PFs processing conditions. Moreover, the challenges and future directions of PFs in the application to germinated edible seeds are finally proposed. This review also attempts to provide an in-depth understanding of the effects of PFs on microbial safety and changes in nutritional properties of germinating edible seeds and a theoretical reference for the future development of PFs in processing safe sprouted seeds.

Comprehensive review on pulsed electric field in food preservation: gaps in current studies for potential future research

In pulsed electric field (PEF) method sources of high voltage pulses are placed amid two electrodes in to fluid or paste type foods. Electricity is passed between two electrodes to sterilize the food. Almost all PEF technology entails the use of this technology in milk and milk product processing, eggs, poultry, juices and other liquid foods to prevent microorganisms. PEF technology, one of the promising methods of non-thermal preservation of food, can address the biological hazards efficiently. Recently available research papers explored PEF technology not only to facilitate the inactivation of microorganisms but also to alleviate the pressing competence for juice extraction purpose from plants for food application and also to intensify the drying and dehydration process of food. Most of the literatures are available on killing of microorganisms using PEF technology but the reports on influence of PEF technology on quality parameters of food after treatment and about their acceptability are limited. Now the technology is becoming popular and many recent papers reported about better yield and excellent quality of nutrient extracted by using PEF technology.

New preservation and detection technologies for edible mushrooms: A review

Edible mushrooms are nutritious, tasty, and have medicinal value, which makes them very popular. Fresh mushrooms have a high water content and a crisp texture. They demonstrate strong metabolic activity after harvesting. However, they are prone to textural changes, microbial infestation, and nutritional and flavor loss, and they therefore require appropriate post-harvest processing and preservation. Important factors affecting safety and quality during their processing and storage include their quality, source, microbial contamination, physical damage, and chemical residues. Thus, these aspects should be tested carefully to ensure safety. In recent years, many new techniques have been used to preserve mushrooms, including electrofluidic drying and cold plasma treatment, as well as new packaging and coating technologies. In terms of detection, many new detection techniques, such as nuclear magnetic resonance (NMR), imaging technology, and spectroscopy can be used as rapid and effective means of detection. This paper reviews the new technological methods for processing and detecting the quality of mainstream edible mushrooms. It mainly introduces their working principles and application, and highlights the future direction of preservation, processing, and quality detection technologies for edible mushrooms. Adopting appropriate post-harvest processing and preservation techniques can maintain the organoleptic properties, nutrition, and flavor of mushrooms effectively. The use of rapid, accurate, and non-destructive testing methods can provide a strong assurance of food safety. At present, these new processing, preservation and testing methods have achieved good results but at the same time there are certain shortcomings. So it is recommended that they also be continuously researched and improved, for example through the use of new technologies and combinations of different technologies. © 2023 Society of Chemical Industry.

Optimization of the Brewing Conditions of Shanlan Rice Wine and Sterilization by Thermal and Intense Pulse Light

This study aimed to optimize the brewing conditions of Shanlan rice wine (SRW) and select a suitable sterilization method. The response surface method experiment was used to optimize the brewing process of SRW. LC-MS/MS (liquid chromatography–tandem mass spectrometry) and GC-MS (gas chromatography–mass spectrometry) were used to analyze the physicochemical components, free amino acids, and flavor metabolites of the thermal-sterilized SRW and the SRW sterilized by intense pulsed light (IPL), respectively. Results showed that the optimum fermentation conditions of SRW were as follows: fermentation temperature, 24.5 °C; Qiuqu amount (the traditional yeast used to produce SRW), 0.78%; water content, 119%. Compared with the physicochemical properties of the control, those of the SRWs separately treated with two sterilization methods were slightly affected. The 60 s pulse treatment reduced the content of bitter amino acids, maintained sweet amino acids and umami amino acids in SRW, and balanced the taste of SRW. After pasteurization, the ester content in wine decreased by 90%, and the alcohol content decreased to different degrees. IPL sterilization slightly affected the ester content and increased the alcohol content. Further analysis of the main flavor metabolites showed that 60 s pulse enhanced the important flavor-producing substances of SRW. In conclusion, 60 s pulse is suitable for sterilizing this wine.

Advances in prepared dish processing using efficient physical fields: A review

Prepared dishes are increasingly popular convenience food that can be eaten directly from hygienic packaging by heating. Physics field (PF) is food processing method built with physical processing technology, which has the characteristics of high efficiency and environmental safety. This review focuses on summarizing the application of PFs in prepared dishes, evaluating and comparing PFs through quality changes during processing and storage of prepared dishes. Currently, improving the quality and extending the shelf life of prepared dishes through thermal and non-thermal processing are the main modes of action of PFs. Most PFs show good potential in handing prepared dishes, but may also react poorly to some prepared dishes. In addition, the difficulty of precise control of processing conditions has led to research mostly at the laboratory stage, but as physical technology continues to break through, more PFs and multi-physical field will be promoted for commercial use in the future. This review contributes to a deeper understanding of the effect of PFs on prepared dishes, and provides theoretical reference and practical basis for future processing research in the development of various enhanced PFs.

Lifestyle of Listeria monocytogenes and food safety: Emerging listericidal technologies in the food industry

Listeria monocytogenes, a causative agent of listeriosis, is a major foodborne pathogen. Among pathogens, L. monocytogenes stands out for its unique ecological and physiological characteristics. This distinct lifestyle of L. monocytogenes has a significant impact on food safety and public health, mainly through the ability of this pathogen to multiply at refrigeration temperature and to persist in the food processing environment. Due to a combination of these characteristics and emerging trends in consumer preference for ready-to-eat and minimally processed food, there is a need to develop effective and sustainable approaches to control contamination of food products with L. monocytogenes. Implementation of an efficient and reliable control strategy for L. monocytogenes must first address the problem of cross-contamination. Besides the preventive control strategies, cross-contamination may be addressed with the introduction of emerging post packaging non-thermal or thermal hurdles that can ensure delivery of a listericidal step in a packed product without interfering with the organoleptic characteristics of a food product. This review aims to present the most relevant findings underlying the distinct lifestyle of L. monocytogenes and its impact on food safety. We also discuss emerging food decontamination technologies that can be used to better control L. monocytogenes.

Salmonella spp. in low water activity food: Occurrence, survival mechanisms, and thermoresistance

The occurrence of disease outbreaks involving low-water-activity (a_w ) foods has gained increased prominence due in part to the fact that reducing free water in these foods is normally a measure that controls the growth and multiplication of pathogenic microorganisms. Salmonella, one of the main bacteria involved in these outbreaks, represents a major public health problem worldwide and in Brazil, which highlights the importance of good manufacturing and handling practices for food quality. The virulence of this pathogen, associated with its high ability to persist in the environment, makes Salmonella one of the main challenges for the food industry. The objectives of this article are to present the general characteristics, virulence, thermoresistance, control, and relevance of Salmonella in foodborne diseases, and describe the so-called low-water-activity foods and the salmonellosis outbreaks involving them.

The future of functional food: Emerging technologies application on prebiotics, probiotics and postbiotics

This review was the first to gather literature about the effect of emerging technologies on probiotic, prebiotic, and postbiotic products. Applying emerging technologies to probiotic products can increase probiotic survival and improve probiotic properties (cholesterol attachment, adhesion to Caco-2 cells, increase angiotensin-converting enzyme (ACE) inhibitory, antioxidant, and antimicrobial activities, and decrease systolic blood pressure). Furthermore, it can optimize the fermentation process, produce or maintain compounds of interest (bacteriocin, oligosaccharides, peptides, phenolic compounds, flavonoids), improve bioactivity (vitamin, aglycones, calcium), and sensory characteristics. Applying emerging technologies to prebiotic products did not result in prebiotic degradation. Still, it contributed to higher concentrations of bioactive compounds (citric and ascorbic acids, anthocyanin, polyphenols, flavonoids) and health properties (antioxidant activity and inhibition of ACE, α-amylase, and α-glucosidase). Emerging technologies may also be applied to obtain postbiotics with increased health effects. In this way, current studies suggest that emerging food processing technologies enhance the efficiency of probiotics and prebiotics in food. The information provided may help food industries to choose a more suitable technology to process their products and provide a basis for the most used process parameters. Furthermore, the current gaps are discussed. Emerging technologies may be used to process food products resulting in increased probiotic functionality, prebiotic stability, and higher concentrations of bioactive compounds. In addition, they can be used to obtain postbiotic products with improved health effects compared to the conventional heat treatment.

Recent developments for controlling microbial contamination of nuts

In recent years, the consumption of nuts has shown an increasing trend worldwide. Nuts are an essential part of several countries' economies as an excellent source of nutrients and bioactive compounds. They are contaminated by environmental factors, improper harvesting practices, inadequate packaging procedures, improper storage, and transportation. The longer storage time also leads to the greater chances of contamination from pathogenic fungi. Nuts are infected with Aspergillus species, Penicillium species, Escherichia coli, Salmonella, and Listeria monocytogenes. Therefore, nuts are associated with a high risk of pathogens and mycotoxins, which demand the urgency of using techniques for enhancing microbial safety and shelf-life stability. Many techniques such as ozone, cold plasma, irradiation, radiofrequency have been explored for the decontamination of nuts. These techniques have different efficiencies for reducing the contamination depending on processing parameters, type of pathogen, and conditions of food material. This review provides insight into decontamination technologies for reducing microbial contamination from nuts.

Novel Techniques for Microbiological Safety in Meat and Fish Industries

The consumer tendency towards convenient, minimally processed meat items has placed extreme pressure on processors to certify the safety of meat or meat products without compromising the quality of product and to meet consumer’s demand. This has prompted difficulties in creating and carrying out novel processing advancements, as the utilization of more up-to-date innovations may influence customer decisions and assessments of meat and meat products. Novel advances received by the fish and meat industries for controlling food-borne microbes of huge potential general wellbeing concern, gaps in the advancements, and the requirement for improving technologies that have been demonstrated to be effective in research settings or at the pilot scale shall be discussed. Novel preparing advancements in the meat industries warrant microbiological approval before being named as industrially suitable alternatives and authorizing infra-structural changes. This miniature review presents the novel techniques for the microbiological safety of meat products, including both thermal and non-thermal methods. These technologies are being successfully implemented and rationalized in subsisting processing surroundings.

Pasteurization of fruit juices by pulsed light treatment: A review on the microbial safety, enzymatic stability, and kinetic approach to process design

Pulsed light (PL) is a polychromatic radiation-based technology, among many other non-thermal processing techniques. The microbiological lethality of the PL technique has been explored in different food matrices along with their associated mechanisms. Pasteurization of fruit juice requires a 5-log cycle reduction in the resistant pathogen in the product. The manufacturers look toward achieving the microbial safety and stability of the juice, while consumers demand high-quality juice. Enzymatic spoilage in fruit juice is also a crucial factor that needs attention. The retailers want the processed juice to be stable, which can be achieved by inactivating the spoilage enzymes and native microflora inside it. The present review argued about the potential of PL technology to produce a microbiologically safe and enzymatically stable fruit juice with a minimal loss in bioactive compounds in the product. Concise information of factors affecting the PL treatment (PLT), primary inactivation mechanism associated with microorganisms, enzymes, the effect of PLT on various quality attributes (microorganisms, spoilage enzymes, bioactive components, sensory properties, color), and shelf life of fruit juices has been put forward. The potential of PL integrated with other non-thermal and mild thermal technologies on the microbial safety and stability of fruit juices has been corroborated. The review also provides suggestions to the readers for designing, modeling, and optimizing the PLT and discusses the use of various primary, secondary kinetic models in detail that have been utilized for different quality parameters in juices. Finally, the challenges and future need associated with PL technology has been summarized.

Ultrasound, infrared and its assisted technology, a promising tool in physical food processing: A review of recent developments

Traditional food processing techniques can no longer meet the ever increasing demand for high quality food across the globe due to its low process efficiency, high energy consumption and low product yield. This review article is focused on the mechanism and application of Infrared (IR) and ultrasound (US) technologies in physical processing of food. We herein present the individual use of IR and US (both mono-frequency and multi-frequency levels) as well as IR and US supported with other thermal and non-thermal technologies to improve their food processing performance. IR and US are recent thermal and non-thermal technologies which have now been successfully used in food industries to solve the demerits of conventional processing technologies. These environmentally-friendly technologies are characterized by low energy consumption, reduced processing time, high mass-transfer rates, better nutrient retention, better product quality, less mechanical damage and improved shelf life. This work could be, with no doubt, useful to the scientific world and food industries by providing insights on recent advances in the use of US and IR technology, which can be applied to improve food processing technologies for better quality and safer products.

The effect of intense pulsed light on the sensory properties of nonfat dry milk

Our objectives were to examine (1) how intense pulsed light (IPL) processing parameters (exposure time and initial temperature) affected aroma, flavor, and mouthfeel of nonfat dry milk, (2) which levels of each parameter produced aroma, flavor, and mouthfeel changes from an untreated control sample, and (3) whether minimal or intense processing conditions produced a noticeable appearance change from the control. Four exposure times (1, 2, 3, and 4 passes through the IPL chamber) and three initial temperatures (25, 30, and 35℃) were studied with untreated milk powder as the control. The samples were prepared as both milk powder and reconstituted milk for sensory evaluation. Using standard evaluating protocols, trained descriptive analysis panelists rated the aroma, flavor, and mouthfeel of these samples. Panelists compared the appearance of the IPL-treated samples that underwent a minimal or intense processing condition to the control by using a two-out-of-five difference test. Increasing the exposure time led to increased intensities of overall flavor, burnt flavor, and umami taste in both milk powder and reconstituted milk, while increasing temperature increased animal and sulfur aromas in reconstituted milk only. Compared to the control, all levels of exposure time at any initial temperature resulted in increased aroma and flavor including cardboard aroma, sulfur aroma, and brothy flavor in both milk powder and reconstituted milk. Only the 4-pass exposure at the initial temperature of 25℃ changed the appearance of milk powder. However, the appearance change was not noticeable in reconstituted milk. PRACTICAL APPLICATION: The standard evaluation protocols and lexicons provide useful tools for research on milk powder. Additionally, the understanding of critical factors impacting sensory properties will contribute to a better implementation of this decontamination technology.

Revisiting Non-Thermal Food Processing and Preservation Methods-Action Mechanisms, Pros and Cons: A Technological Update (2016-2021)

The push for non-thermal food processing methods has emerged due to the challenges associated with thermal food processing methods, for instance, high operational costs and alteration of food nutrient components. Non-thermal food processing involves methods where the food materials receive microbiological inactivation without or with little direct application of heat. Besides being well established in scientific literature, research into non-thermal food processing technologies are constantly on the rise as applied to a wide range of food products. Due to such remarkable progress by scientists and researchers, there is need for continuous synthesis of relevant scientific literature for the benefit of all actors in the agro-food value chain, most importantly the food processors, and to supplement existing information. This review, therefore, aimed to provide a technological update on some selected non-thermal food processing methods specifically focused on their operational mechanisms, their effectiveness in preserving various kinds of foods, as revealed by their pros (merits) and cons (demerits). Specifically, pulsed electric field, pulsed light, ultraviolet radiation, high-pressure processing, non-thermal (cold) plasma, ozone treatment, ionizing radiation, and ultrasound were considered. What defines these techniques, their ability to exhibit limited changes in the sensory attributes of food, retain the food nutrient contents, ensure food safety, extend shelf-life, and being eco-friendly were highlighted. Rationalizing the process mechanisms about these specific non-thermal technologies alongside consumer education can help raise awareness prior to any design considerations, improvement of cost-effectiveness, and scaling-up their capacity for industrial-level applications.

Recent trends in bacterial decontamination of food products by hurdle technology: A synergistic approach using thermal and non-thermal processing techniques

Researchers are continuously discovering varied technologies for microbial control to ensure worldwide food safety from farm-to-fork. The microbial load and virulence of spoilage causing microorganisms, including bacteria, fungi, yeasts, virus, and protozoa, determines the extent of microbial contamination in a food product. Certain pathogenic microbes can cause food poisoning and foodborne diseases, and adversely affect consumers' health. To erade such food safety-related problems, various traditional and novel food processing methods have been adopted for decades. However, some decontamination techniques bring undesirable changes in food products by affecting their organoleptic and nutritional properties. Combining various thermal and non-thermal food processing methods is an effective way to impart a synergistic effect against food spoilage microorganisms and can be used as an alternative way to combat certain limitations of food processing technologies. The combination of different techniques as hurdles put the microorganisms in a hostile environment and disturbs the homeostasis of microorganisms in food temporarily or permanently. Optimization and globalization of these hurdle combinations is an emerging field in the food processing sector. This review gives an overview of recent inventions in hurdle technology for bacterial decontamination, combining different thermal and non-thermal processing techniques in various food products.

Application of Novel Non-Thermal Physical Technologies to Degrade Mycotoxins

Mycotoxins cause adverse effects on human health. Therefore, it is of the utmost importance to confront them, particularly in agriculture and food systems. Non-thermal plasma, electron beam radiation, and pulsed light are possible novel non-thermal technologies offering promising results in degrading mycotoxins with potential for practical applications. In this paper, the available publications are reviewed-some of them report efficiency of more than 90%, sometimes almost 100%. The mechanisms of action, advantages, efficacy, limitations, and undesirable effects are reviewed and discussed. The first foretastes of plasma and electron beam application in the industry are in the developing stages, while pulsed light has not been employed in large-scale application yet.

An Overview of the Factors Influencing Apple Cider Sensory and Microbial Quality from Raw Materials to Emerging Processing Technologies

Given apple, an easily adapted culture, and a large number of apple varieties, the production of apple cider is widespread globally. Through the fermentation process, a series of chemical changes take place depending on the apple juice composition, type of microorganism involved and technology applied. Following both fermentations, alcoholic and malo-lactic, and during maturation, the sensory profile of cider changes. This review summarises the current knowledge about the influence of apple variety and microorganisms involved in cider fermentation on the sensory and volatile profiles of cider. Implications of both Saccharomyces, non-Saccharomyces yeast and lactic acid bacteria, respectively, are discussed. Also are presented the emerging technologies applied to cider processing (pulsed electric field, microwave extraction, enzymatic, ultraviolet and ultrasound treatments, high-pressure and pulsed light processing) and the latest trends for a balanced production in terms of sustainability, authenticity and consumer preferences.

Edible Coating and Pulsed Light to Increase the Shelf Life of Food Products

The application of edible coatings (EC) in combination with pulsed light (PL) treatments represents an emerging approach for extending the shelf life of highly perishable but high value-added products, such as fresh-cut fruits and vegetables. The surface of these products would benefit from the protective effects of ECs and the PL decontamination capability. This review describes in detail the fundamentals of both EC and PL, focusing on the food engineering principles in the formulation and application of EC and the delivery of efficient PL treatments and the technological aspects related to the food characterization following these treatments and discussing the implementation of the two technologies, individually or in combination. The advantages of the combination of EC and PL are extensively discussed emphasizing the potential benefits that may be derived from their combination when preserving perishable foods. The downsides of combining EC and PL are also presented, with specific reference to the potential EC degradation when exposed to PL treatments and the screening effect of PL transmittance through the coating layer. Finally, the potential applications of the combined treatments to food products are highlighted, comparatively presenting the treatment conditions and the product shelf-life improvement.

Unconventional Methods of Preserving Meat Products and Their Impact on Health and the Environment

A dual objective of food storage is to retain nutritional value and safe consumption over time. As supply chains have globalized, food protection and preservation methods have advanced. However, increasing demands to cater for larger volumes and for more effective food storage call for new technologies. This paper examines promising meat preservation methods, including high pressure process, ultrasounds, pulsating electric and magnetic field, pulsed light and cold plasma. These methods not only make it possible to obtain meat and meat products with a longer shelf life, safer for health and without preservatives, but also are more environment-friendly in comparison with traditional methods. With the use of alternative methods, it is possible to obtain meat products that are microbiologically safer, whilst also high quality and free from chemical additives. Moreover, these new technologies are also more ecological, do not require large quantities of energy or water, and generate less waste.