Nano-TiO2 stability in medium and size as important factors of toxicity in macrophage-like cells

Metabolic alterations in alga Chlamydomonas reinhardtii exposed to nTiO2 materials

Nano-sized titanium dioxide (nTiO₂) is one of the most commonly used materials, however the knowledge about the molecular basis for metabolic and physiological changes in phytoplankton is yet to be explored. In the present study we use a combination of targeted metabolomics, transcriptomics and physiological response studies to decipher the metabolic perturbation in green alga Chlamydomonas reinhardtii exposed for 72 h to increasing concentrations (2, 20, 100 and 200 mg L⁻¹) of nTiO₂ with primary sizes of 5, 15 and 20 nm. Results show that the exposure to all three nTiO₂ materials induced perturbation of the metabolism of amino acids, nucleotides, fatty acids, tricarboxylic acids, antioxidants but not in the photosynthesis. The alterations of the most responsive metabolites were concentration and primary size-dependent despite the significant formation of micrometer-size aggregates and their sedimentation. The metabolic perturbations corroborate the observed physiological responses and transcriptomic results and confirmed the importance of oxidative stress as a major toxicity mechanism for nTiO₂. Transcriptomics revealed also an important influence of nTiO₂ treatments on the transport, adenosine triphosphate binding cassette transporters, and metal transporters, suggesting a perturbation in a global nutrition of the microalgal cell, which was most pronounced for exposure to 5 nm nTiO₂. The present study provides for the first-time evidence for the main metabolic perturbations in green alga C. reinhardtii exposed to nTiO₂ and helps to improve biological understanding of the molecular basis of these perturbations.

Combination of transcriptomics, metabolomics and physiology studies highlighted the nanoparticle size- and concentration-dependent disturbance in algal metabolism induced by nTiO₂.

Colorants in coatings

The aim of this chapter is to provide a compact overview of colorants and their use in coatings including a brief introduction to paint technology and its raw materials. In addition, it will focus on individual colorants by collecting information from the available literature mainly for their use in coatings. Publications on colorants in coatings applications are in many cases standard works that cover the wider aspects of color chemistry and paint technology and are explicitly recommended for a more detailed study of the subject [1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18]. Articles or information on paint formulation using coatings which contain colorants are rare [19]. This formulation expertise is often company property as it is the result of many years of effort built up over very long series of practical “trial-and-error” optimization tests and, more recently, supported by design of experiment and laboratory process automation [20, 21]. Therefore, it is protected by rigorous secrecy agreements. Formulations are in many ways part of a paint manufacturer’s capital, because of their use in automotive coatings, coil coatings, powder coatings, and specialist knowledge is indispensable to ensure their successful industrial use [22]. An important source to learn about the use of pigments in different coating formulations are guidance or starting formulations offered by pigment, additive, and resin manufacturers. These are available upon request from the technical service unit of these companies. Coating formulations can also be found scattered in books on coating and formulation technology [4, 5, 18, 23,24,25,26,27]. This overview can in no way claim to be complete, as the literature and relevant journals in this field are far too extensive. Nevertheless, it remains the author’s hope that the reader will gain a comprehensive insight into the fascinating field of colorants for coatings, including its literature and current research activities and last but not least its scientific attractiveness and industrial relevance.

Testing Strategies of the In Vitro Micronucleus Assay for the Genotoxicity Assessment of Nanomaterials in BEAS-2B Cells

The evaluation of the frequency of micronuclei (MN) is a broadly utilised approach in in vitro toxicity testing. Nevertheless, the specific properties of nanomaterials (NMs) give rise to concerns regarding the optimal methodological variants of the MN assay. In bronchial epithelial cells (BEAS-2B), we tested the genotoxicity of five types of NMs (TiO₂: NM101, NM103; SiO₂: NM200; Ag: NM300K, NM302) using four variants of MN protocols, differing in the time of exposure and the application of cytochalasin-B combined with the simultaneous and delayed co-treatment with NMs. Using transmission electron microscopy, we evaluated the impact of cytochalasin-B on the transport of NMs into the cells. To assess the behaviour of NMs in a culture media for individual testing conditions, we used dynamic light scattering measurement. The presence of NMs in the cells, their intracellular aggregation and dispersion properties were comparable when tests with or without cytochalasin-B were performed. The genotoxic potential of various TiO₂ and Ag particles differed (NM101 < NM103 and NM302 < NM300K, respectively). The application of cytochalasin-B tended to increase the percentage of aberrant cells. In conclusion, the comparison of the testing strategies revealed that the level of DNA damage induced by NMs is affected by the selected methodological approach. This fact should be considered in the interpretation of the results of genotoxicity tests.

The reactive oxygen species as pathogenic factors of fragmented microplastics to macrophages

The presence of microplastics in the various food web raised concerns on human health, but little is known about the target cells and mechanism of toxicity of microplastics. In this study, we evaluated the toxicity of microplastics using relevant cell lines to the oral route of exposure. Approximately 100 μm-sized fragment-type polypropylene (PP) and polystyrene (PS) particles were prepared by sieving after pulverization and further applied the accelerated weathering using ultraviolet and heat. Thus, the panel of microplastics includes fresh PP (f-PP), fresh PS (f-PS), weathered PP (w-PP), and weathered PS (w-PS). The spherical PS with a similar size was used as a reference particle. Treatment of all types of PP and PS did not show any toxic effects to the Caco-2 cells and HepG2 cells. However, the treatment of microplastics to THP-1 macrophages showed significant toxicity in the order of f-PS > f-PP > w-PS > w-PP. The weathering process significantly reduced the reactive oxygen species (ROS) generation potential of both microplastics because the weathered microplastics have an increased affinity to bind serum protein which acts as a ROS scavenger. The intrinsic ROS generation potential of microplastics showed a good correlation with the toxicity endpoints including cytotoxicity and pro-inflammatory cytokines in THP-1 macrophages. In conclusion, the results of this study suggest that the target cell type of microplastics via oral administration can be macrophages and the pathogenic factor to THP-1 macrophages is the intrinsic ROS generation potential of microplastics. Nevertheless, the toxic effect of microplastics tested in this study was much less than that of nano-sized particles.

Utilizing literature-based rodent toxicology data to derive potency estimates for quantitative risk assessment

Evaluating the potential occupational health risk of engineered nanomaterials is an ongoing need. The objective of this meta-analysis, which consisted of 36 studies containing 86 materials, was to assess the availability of published in vivo rodent pulmonary toxicity data for a variety of nanoscale and microscale materials and to derive potency estimates via benchmark dose modeling. Additionally, the potency estimates based on particle mass lung dose associated with acute pulmonary inflammation were used to group materials based on toxicity. The commonalities among the physicochemical properties of the materials in each group were also explored. This exploration found that a material's potency tended to be associated primarily with the material class based on chemical composition and form (e.g. carbon nanotubes, TiO₂, ZnO) rather than with particular physicochemical properties. Limitations in the data available precluded a more extensive analysis of these associations. Issues such as data reporting and appropriate experimental design for use in quantitative risk assessment are the main reasons publications were excluded from these analyses and are discussed.

Possible Adverse Effects of Food Additive E171 (Titanium Dioxide) Related to Particle Specific Human Toxicity, Including the Immune System

Titanium dioxide (TiO₂) is used as a food additive (E171) and can be found in sauces, icings, and chewing gums, as well as in personal care products such as toothpaste and pharmaceutical tablets. Along with the ubiquitous presence of TiO₂ and recent insights into its potentially hazardous properties, there are concerns about its application in commercially available products. Especially the nano-sized particle fraction (<100 nm) of TiO₂ warrants a more detailed evaluation of potential adverse health effects after ingestion. A workshop organized by the Dutch Office for Risk Assessment and Research (BuRO) identified uncertainties and knowledge gaps regarding the gastrointestinal absorption of TiO₂, its distribution, the potential for accumulation, and induction of adverse health effects such as inflammation, DNA damage, and tumor promotion. This review aims to identify and evaluate recent toxicological studies on food-grade TiO₂ and nano-sized TiO₂ in ex-vivo, in-vitro, and in-vivo experiments along the gastrointestinal route, and to postulate an Adverse Outcome Pathway (AOP) following ingestion. Additionally, this review summarizes recommendations and outcomes of the expert meeting held by the BuRO in 2018, in order to contribute to the hazard identification and risk assessment process of ingested TiO₂.

Light-Induced Oxidase Activity of DNAzyme-Modified Quantum Dots

Here, we report the synthesis of a quantum dot (QD)-DNA covalent conjugate to be used as an H₂O₂-free DNAzyme system with oxidase activity. Amino-coupling conjugation was carried out between amino-modified oligonucleotides (CatG4-NH₂) and carboxylated quantum dots (CdTe@COOH QDs). The obtained products were characterized by spectroscopic methods (UV-Vis, fluorescence, circular dichroizm (CD), and IR) and the transmission electron microscopy (TEM) technique. A QD-DNA system with a low polydispersity and high stability in aqueous solutions was successfully obtained. The catalytic activity of the QD-DNA conjugate was examined with Amplex Red and ABTS (2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate)) indicators using reactive oxygen species (ROS) generated by visible light irradiation. The synthesized QD-DNAzyme exhibited enhanced catalytic activity compared with the reference system (a mixture of QDs and DNAzyme). This proved the assumption that the covalent attachment of DNAzyme to the surface of QD resulted in a beneficial effect on its catalytic activity. The results proved that the QD-DNAzyme system can be used for generation of the signal by light irradiation. The light-induced oxidase activity of the conjugate was demonstrated, proving that the QD-DNAzyme system can be useful for the development of new cellular bioassays, e.g., for the determination of oxygen radical scavengers.

Negligible effects of TiO2 nanoparticles at environmentally relevant concentrations on the translocation and accumulation of perfluorooctanoic acid and perfluorooctanesulfonate in hydroponically grown pumpkin seedlings (Cucurbita maxima × C. moschata)

Titanium dioxide nanoparticles (TiO₂-NPs) are widely distributed in the environment. It has been demonstrated that TiO₂-NPs could modify the environmental fate and bioavailability of organic pollutants, which affects ecological risks of TiO₂-NPs and organic pollutants. In this study, the uptake, translocation and accumulation of perfluorooctanoic acid (PFOA) and perfluorooctanesulfonate (PFOS) in pumpkin plants was investigated in the presence of TiO₂-NPs. We reported for the first time the negligible effects of TiO₂-NPs at environmentally relevant concentrations (0.05-5 mg/L) on the uptake and accumulation of PFOA and PFOS in hydroponically grown pumpkin seedlings regardless of root, stem and leaf. This phenomenon was independent of the initial concentrations of PFOA/PFOS and TiO₂-NPs in the exposure solution. Also, seedling mass and contents of chlorophyll and anthocyanin were not affected by the co-exposure. Adsorption tests demonstrated the negligible adsorption of PFOA/PFOS on TiO₂-NPs in the exposure solution. Moreover, uptake of PFOA/PFOS was insensitive to aquaporin inhibitor AgNO₃ but significantly inhibited by niflumic acid (anion channel blocker) and 2,4-dinitrophenol (metabolic inhibitor) whereas Ti concentration in root was not affected by niflumic acid and 2,4-dinitrophenol but significantly decreased by AgNO₃, indicating that transport of PFOA/PFOS and TiO₂-NPs were via different routes into the pumpkin seedling. It was proposed that different pathways by which TiO₂-NPs and PFOA/PFOS transported into the pumpkin seedling and negligible adsorption of PFOA/PFOS on TiO₂-NPs contributed to the negligible effects of TiO₂-NPs on the uptake, translocation and accumulation of PFOA/PFOS in pumpkin seedlings. In total, this work would improve our understanding of the ecological risks of TiO₂-NPs in the environment.

Molecular Responses in THP-1 Macrophage-Like Cells Exposed to Diverse Nanoparticles

In the body, engineered nanoparticles (NPs) may be recognized and processed by immune cells, among which macrophages play a crucial role. We evaluated the effects of selected NPs [NM-100 (TiO₂), NM-110 (ZnO), NM-200 (SiO₂), and NM-300 K (Ag)] on THP-1 macrophage-like cells. The cells were exposed to subcytotoxic concentrations of NPs (1-25 µg/mL) and the expression of immunologically relevant genes (VCAM1, TNFA, CXCL8, ICAM1, CD86, CD192, and IL1B) was analyzed by RT-qPCR. The expression of selected cytokines, growth factors and surface molecules was assessed by flow cytometry or ELISA. Generation of reactive oxygen species and induction of DNA breaks were also analyzed. Exposure to diverse NPs caused substantially different molecular responses. No significant effects were detected for NM-100 treatment. NM-200 induced production of IL-8, a potent attractor and activator of neutrophils, growth factors (VEGF and IGF-1) and superoxide. NM-110 triggered a proinflammatory response, characterized by the activation of transcription factor NF-κB, an enhanced production of proinflammatory cytokines (TNF-α) and chemokines (IL-8). Furthermore, the expression of cell adhesion molecules VCAM-1 and ICAM-1 and hepatocyte growth factor (HGF), as well as superoxide production and DNA breaks, were affected. NM-300 K enhanced IL-8 production and induced DNA breaks, however, it decreased the expression of chemokine receptor (CCR2) and CD86 molecule, indicating potential immunosuppressive activity. The toxicity of ZnO and Ag NPs was probably caused by their intracellular dissolution, as indicated by transmission electron microscopy imaging. The observed effects in macrophages might further influence both innate and adaptive immune responses by promoting neutrophil recruitment via IL-8 release and enhancing the adhesion and stimulation of T cells by VCAM-1 and ICAM-1 expression.