Inhalation of iron-abundant gas metal arc welding-mild steel fume promotes lung tumors in mice

In vivo and in vitro toxicity of a stainless-steel aerosol generated during thermal spray coating

Thermal spray coating is an industrial process in which molten metal is sprayed at high velocity onto a surface as a protective coating. An automated electric arc wire thermal spray coating aerosol generator and inhalation exposure system was developed to simulate an occupational exposure and, using this system, male Sprague-Dawley rats were exposed to stainless steel PMET720 aerosols at 25 mg/m³ × 4 h/day × 9 day. Lung injury, inflammation, and cytokine alteration were determined. Resolution was assessed by evaluating these parameters at 1, 7, 14 and 28 d after exposure. The aerosols generated were also collected and characterized. Macrophages were exposed in vitro over a wide dose range (0-200 µg/ml) to determine cytotoxicity and to screen for known mechanisms of toxicity. Welding fumes were used as comparative particulate controls. In vivo lung damage, inflammation and alteration in cytokines were observed 1 day post exposure and this response resolved by day 7. Alveolar macrophages retained the particulates even after 28 day post-exposure. In line with the pulmonary toxicity findings, in vitro cytotoxicity and membrane damage in macrophages were observed only at the higher doses. Electron paramagnetic resonance showed in an acellular environment the particulate generated free radicals and a dose-dependent increase in intracellular oxidative stress and NF-kB/AP-1 activity was observed. PMET720 particles were internalized via clathrin and caveolar mediated endocytosis as well as actin-dependent pinocytosis/phagocytosis. The results suggest that compared to stainless steel welding fumes, the PMET 720 aerosols were not as overtly toxic, and the animals recovered from the acute pulmonary injury by 7 days.

Indirect mediators of systemic health outcomes following nanoparticle inhalation exposure

The growing field of nanoscience has shed light on the wide diversity of natural and anthropogenic sources of nano-scale particulates, raising concern as to their impacts on human health. Inhalation is the most robust route of entry, with nanoparticles (NPs) evading mucociliary clearance and depositing deep into the alveolar region. Yet, impacts from inhaled NPs are evident far outside the lung, particularly on the cardiovascular system and highly vascularized organs like the brain. Peripheral effects are partly explained by the translocation of some NPs from the lung into the circulation; however, other NPs largely confined to the lung are still accompanied by systemic outcomes. Omic research has only just begun to inform on the complex myriad of molecules released from the lung to the blood as byproducts of pulmonary pathology. These indirect mediators are diverse in their molecular make-up and activity in the periphery. The present review examines systemic outcomes attributed to pulmonary NP exposure and what is known about indirect pathological mediators released from the lung into the circulation. Further focus was directed to outcomes in the brain, a highly vascularized region susceptible to acute and longer-term outcomes. Findings here support the need for big-data toxicological studies to understand what drives these health outcomes and better predict, circumvent, and treat the potential health impacts arising from NP exposure scenarios.

Intraperitoneal exposure of iron oxide nanoparticles causes dose-dependent toxicity in Wistar rats

Nanoparticles of iron oxide, with diameters beteween 1 to 100 nm, have notable implications for human health and well being. In the current study, we have investigated the effects of iron oxide nanoparticles (IONP) exposure on general physiology and health of adult Wistar rats. IONP used in the study had spherical shape and average size in the range of 15-20 nm. A total of eight groups of rats were repeatedly injected with 0 (control), 20, 40, and 80 mg IONP per kg body weight intraperitoneally under two different exposure schemes (sub-acute and sub-chronic). IONP exposure caused significant changes in lungs, liver, and kidney indices in both exposure schemes. Sub-acute exposure did not affect body weight gain in treated rats, but longer duration exposure was responsible for significant reduction in body weight. Mesenteries, visceral fatty tissues, and visceral peritoneal membranes demonstrated apparent accumulations of IONP in a dose and time-dependent manner. Hematological analysis showed that total RBC count, hemoglobin content, hematocrit, mean corpuscular hemoglobin (MCH), mean corpuscular hemoglobin concentration (MCHC) and mean platelet volume (MPV) were not affected by IONP exposure. Total lymphocyte count, however, was elevated in low- and mid-dose treated rats, but not in high-dose group. Serum lactate dehydrogenase (LDH) increased significantly in rats treated with mid and high doses as compared to control. Serum creatinine and blood urea nitrogen levels were also significantly altered in treated rats. Histological study found significant hepatic damage and mild spleen toxicity. Our report suggests that IONP exhibit significant toxicity in rats.

Toxicity of stainless and mild steel particles generated from gas-metal arc welding in primary human small airway epithelial cells

Welding fumes induce lung toxicity and are carcinogenic to humans but the molecular mechanisms have yet to be clarified. The aim of this study was to evaluate the toxicity of stainless and mild steel particles generated via gas-metal arc welding using primary human small airway epithelial cells (hSAEC) and ToxTracker reporter murine stem cells, which track activation of six cancer-related pathways. Metal content (Fe, Mn, Ni, Cr) of the particles was relatively homogenous across particle size. The particles were not cytotoxic in reporter stem cells but stainless steel particles activated the Nrf2-dependent oxidative stress pathway. In hSAEC, both particle types induced time- and dose-dependent cytotoxicity, and stainless steel particles also increased generation of reactive oxygen species. The cellular metal content was higher for hSAEC compared to the reporter stem cells exposed to the same nominal dose. This was, in part, related to differences in particle agglomeration/sedimentation in the different cell media. Overall, our study showed differences in cytotoxicity and activation of cancer-related pathways between stainless and mild steel welding particles. Moreover, our data emphasizes the need for careful assessment of the cellular dose when comparing studies using different in vitro models.

Assessment of particulate matter toxicity and physicochemistry at the Claim 28 uranium mine site in Blue Gap, AZ

Thousands of abandoned uranium mines (AUMs) exist in the western United States. Due to improper remediation, windblown dusts generated from AUMs are of significant community concern. A mobile inhalation lab was sited near an AUM of high community concern ("Claim 28") with three primary objectives: to (1) determine the composition of the regional ambient particulate matter (PM), (2) assess meteorological characteristics (wind speed and direction), and (3) assess immunological and physiological responses of mice after exposures to concentrated ambient PM (or CAPs). C57BL/6 and apolipoprotein E-null (ApoE^-/-) mice were exposed to CAPs in AirCARE1 located approximately 1 km to the SW of Claim 28, for 1 or 28 days for 4 hr/day at approximately 80 µg/m³ CAPs. Bronchoalveolar lavage fluid (BALF) analysis revealed a significant influx of neutrophils after a single-day exposure in C57BL/6 mice (average PM_2.5 concentration = 68 µg/m³). Lungs from mice exposed for 1 day exhibited modest increases in Tnfa and Tgfb mRNA levels in the CAPs exposure group compared to filtered air (FA). Lungs from mice exposed for 28 days exhibited reduced Tgfb (C57BL/6) and Tnfa (ApoE^-/-) mRNA levels. Wind direction was typically moving from SW to NE (away from the community) and, while detectable in all samples, uranium concentrations in the PM_2.5 fraction were not markedly different from published-reported values. Overall, exposure to CAPs in the region of the Blue GAP Tachee's Claim-28 uranium mine demonstrated little evidence of overt pulmonary injury or inflammation or ambient air contamination attributed to uranium or vanadium.

Tumorigenic response in lung tumor susceptible A/J mice after sub-chronic exposure to calcium chromate or iron (III) oxide

Iron oxides are Group 3 (not classifiable as to its carcinogenicity to humans) according to the International Agency for Research on Cancer (IARC). Occupational exposures during iron and steel founding and hematite underground mining as well as other iron predominant exposures such as welding are Group 1 (carcinogenic to humans). The objective of this study was to investigate the potential of iron as iron (III) oxide (Fe₂O₃) to initiate lung tumors in A/J mice, a lung tumor susceptible strain. Male A/J mice were exposed by oropharyngeal aspiration to suspensions of Fe₂O₃ (1 mg) or calcium chromate (CaCrO₄; 100 μg; positive control) for 26 weeks (once per week). Shams were exposed to 50 μL phosphate buffered saline (PBS; vehicle). Mice were euthanized 70 weeks after the first exposure and lung nodules were enumerated. Both CaCrO₄ and Fe₂O₃ significantly increased gross-observed lung tumor multiplicity in A/J mice (9.63 ± 0.55 and 3.35 ± 0.30, respectively) compared to sham (2.31 ± 0.19). Histopathological analysis showed that bronchiolo-alveolar adenomas (BAA) and carcinomas (BAC) were the primary lung tumor types in all groups and were increased in the exposed groups compared to sham. BAC were significantly increased (146 %) in the CaCrO₄ group and neared significance in the Fe₂O₃ group (100 % increase; p = 0.085). BAA and other histopathological indices of toxicity followed the same pattern with exposed groups increased compared to sham control. In conclusion, evidence from this study, in combination with our previous studies, demonstrate that exposure to iron alone may be a potential risk factor for lung carcinogenesis.

Two-stage 3-methylcholanthrene and butylated hydroxytoluene-induced lung carcinogenesis in mice

Lung cancer is one of the deadliest types of cancer and as such requires disease models that are useful for identification of novel pathways for biomarkers as well as to test therapeutic agents. Adenocarcinoma (ADC), the most prevalent type of lung cancer, is a subtype of non-small cell lung carcinoma (NSCLC) and a disease driven mainly by smoking. However, it is also the most common subtype of lung cancer found in non-smokers with environmental exposures. Chemically driven models of lung cancer, also called primary models of lung cancer, are important because they do not overexpress or delete oncogenes or tumor suppressor genes, respectively, to increase oncogenesis. Instead these models test tumor development without forcing a specific pathway (i.e., Kras). The primary focus of this chapter is to discuss a well-established 2-stage mouse model of lung adenocarcinomas. The initiator (3-methylcholanthrene, MCA) does not elicit many, if any, tumors if not followed by exposure to the tumor promoter (butylated hydroxytoluene, BHT). In sensitive strains, such as A/J, FVB, and BALB, significantly greater numbers of tumors develop following the MCA/BHT protocol compared to MCA alone. BHT does not elicit tumors on its own; it is a non-genotoxic carcinogen and promoter. In these sensitive strains, promotion is also associated with inflammation characterized by infiltrating macrophages, lymphocytes, and neutrophils, and other inflammatory cell types in addition to increases in total protein content reflective of lung hyperpermeability. This 2-stage model is a useful tool to identify unique promotion specific events to then test in future intervention studies.

Fermented black barley ameliorates lung injury induced by cooking oil fumes via antioxidant activity and regulation of the intestinal microbiome in mice

To investigate the effect of fermented black barley on cooking oil fume (COF)-induced lung injury, male ICR mice were randomized into five groups: normal control (NC), fermented black barley treatment (NF), COF exposure (O), COF + fermented black barley treatment (OF) and COF + Lactobacillus treatment (OL). The exposure of mice to COF was performed for 5 min per day and 4 days per week for a total of 9 weeks, and the mice in the OF, NF and OL groups were administered fermented black barley or Lactobacillus continuously for 9 weeks (1 mL/100 g). Our results showed that the gamma-aminobutyric acid (GABA), total phenolic, and flavonoid contents significantly increased after fermentation (P < 0.01). In addition, fermented black barley significantly increased SOD activity in the lung tissue, decreased the wet pulmonary coefficient, inhibited the reduction of microbial diversity and richness, and upregulated genes involved in cilium assembly and the cilium axoneme. These findings support the notion that fermented black barley can ameliorate COF-induced lung injury in mice.

Welding Fumes, a Risk Factor for Lung Diseases

(1) Background: Welding fumes (WFs) are composed of fine and ultrafine particles, which may reach the distal airways and represent a risk factor for respiratory diseases. (2) Methods: In vitro and in vivo studies to understand WFs pathogenesis were selected. Epidemiological studies, original articles, review, and meta-analysis to examine solely respiratory disease in welders were included. A systematic literature search, using PubMed, National Institute for Occupational Safety and Health Technical Information Center (NIOSHTIC), and Web of Science databases, was performed. (3) Results: Dose, time of exposure, and composition of WFs affect lung injury. Inflammation, lung defense suppression, oxidative stress, DNA damage, and genotoxic effects were observed after exposure both to mild and stainless steel WFs. (4) Conclusions: The detection of lung diseases associated with specific occupational exposure is crucial as complete avoidance or reduction of the exposure is difficult to achieve. Further studies in the area of particle research may aid the understanding of mechanisms involved in welding-related lung disease and to expand knowledge in welding-related cardiovascular diseases.

Endogenous doesn't always mean innocuous: a scoping review of iron toxicity by inhalation

Ambient air pollution is a leading risk factor for the global burden of disease. One possible pathway of particulate matter (PM)-induced toxicity is through iron (Fe), the most abundant metal in the atmosphere. The aim of the review was to consider the complexity of Fe-mediated toxicity following inhalation exposure focusing on the chemical and surface reactivity of Fe as a transition metal and possible pathways of toxicity via reactive oxygen species (ROS) generation as well as considerations of size, morphology, and source of PM. A broad term search of 4 databases identified 2189 journal articles and reports examining exposure to Fe via inhalation in the past 10 years. These were sequentially analyzed by title, abstract and full-text to identify 87 articles publishing results on the toxicity of Fe-containing PM by inhalation or instillation to the respiratory system. The remaining 87 papers were examined to summarize research dealing with in vitro, in vivo and epidemiological studies involving PM containing Fe or iron oxide following inhalation or instillation. The major findings from these investigations are summarized and tabulated. Epidemiological studies showed that exposure to Fe oxide is correlated with an increased incidence of cancer, cardiovascular diseases, and several respiratory diseases. Iron PM was found to induce inflammatory effects in vitro and in vivo and to translocate to remote locations including the brain following inhalation. A potential pathway for the PM-containing Fe-mediated toxicity by inhalation is via the generation of ROS which leads to lipid peroxidation and DNA and protein oxidation. Our recommendations include an expansion of epidemiological, in vivo and in vitro studies, integrating research improvements outlined in this review, such as the method of particle preparation, cell line type, and animal model, to enhance our understanding of the complex biological interactions of these particles.

Iron Oxide Nanoparticle-Induced Neoplastic-Like Cell Transformation in Vitro Is Reduced with a Protective Amorphous Silica Coating

Iron oxide nanoparticles (IONP) have recently surged in production and use in a wide variety of biomedical and environmental applications. However, their potential long-term health effects, including carcinogenesis, are unknown. Limited research suggests IONP can induce genotoxicity and neoplastic transformation associated with particle dissolution and release of free iron ions. "Safe by design" strategies involve the modification of particle physicochemical properties to affect subsequent adverse outcomes, such as an amorphous silica coating to reduce IONP dissolution and direct interaction with cells. We hypothesized that long-term exposure to a specific IONP (nFe₂O₃) would induce neoplastic-like cell transformation, which could be prevented with an amorphous silica coating (SiO₂-nFe₂O₃). To test this hypothesis, human bronchial epithelial cells (Beas-2B) were continuously exposed to a 0.6 μg/cm² administered a dose of nFe₂O₃ (∼0.58 μg/cm² delivered dose), SiO₂-nFe₂O₃ (∼0.55 μg/cm² delivered dose), or gas metal arc mild steel welding fumes (GMA-MS, ∼0.58 μg/cm² delivered dose) for 6.5 months. GMA-MS are composed of roughly 80% iron/iron oxide and were recently classified as a total human carcinogen. Our results showed that low-dose/long-term in vitro exposure to nFe₂O₃ induced a time-dependent neoplastic-like cell transformation, as indicated by increased cell proliferation and attachment-independent colony formation, which closely matched that induced by GMA-MS. This transformation was associated with decreases in intracellular iron, minimal changes in reactive oxygen species (ROS) production, and the induction of double-stranded DNA damage. An amorphous silica-coated but otherwise identical particle (SiO₂-nFe₂O₃) did not induce this neoplastic-like phenotype or changes in the parameters mentioned above. Overall, the presented data suggest the carcinogenic potential of long-term nFe₂O₃ exposure and the utility of an amorphous silica coating in a "safe by design" hazard reduction strategy, within the context of a physiologically relevant exposure scenario (low-dose/long-term), with model validation using GMA-MS.

Influence of welding fume metal composition on lung toxicity and tumor formation in experimental animal models

Millions of workers in the US and worldwide are exposed to complex, metal-rich welding fumes. Although welding is a crucial industrial process, the generated fumes are known to cause acute and chronic health effects when inhaled. The International Agency for Research on Cancer (IARC) classified welding fumes as carcinogenic to humans (Group 1) in 2017, based on sufficient epidemiological evidence and limited evidence in animals, an upgrade from the former Group 2B (possibly carcinogenic to humans) classification. There is human evidence that both iron-abundant mild steel as well as chromium- and nickel-containing stainless steel welding fumes contribute to an increased risk of lung cancer. Recent animal studies show that welding fumes may act as lung tumor promoters, regardless of the presence or absence of potentially carcinogenic metals, such as chromium and nickel. The goal of this manuscript was to examine the pulmonary responses associated with welding fumes by reviewing a series of recent experimental animal studies that assessed the influence of welding fume metal composition (e.g., stainless steel versus mild steel welding fume) on markers of lung toxicity and tumor development. Additional in vivo laboratory studies are needed to further explore the association between welding and lung cancer and to help advance our understanding of a potential mechanistic link.

The contribution of bronchoalveolar lavage in the diagnosis of welder's lung in a patient with pulmonary fibrosis

Interstitial pulmonary fibrosis is rare clinical entity related to welding usually associated with long term and heavy exposure to welding fumes. A 56-year-old asymptomatic male patient was referred to our clinic due to abnormal chest X-ray findings that was requested for regular controls. He has been working as a welder both indoor and outdoor settings for the last 25 years. The radiological findings were compatible with usual interstitial pneumonia on computed tomography of thorax. Pulmonary function tests, exercise capacity and laboratory results were within normal limits. Collagen tissue markers were negative. In order to confirm the relation of welding with pulmonary fibrosis, bronchoalveolar lavage was performed and stained with Prussian blue. The demonstration of hemosiderin-laden macrophages (25%) confirmed this association and allowed differential diagnosis. Besides it helped the patient decide to leave his job.

Pulmonary toxicity and lung tumorigenic potential of surrogate metal oxides in gas metal arc welding-stainless steel fume: Iron as a primary mediator versus chromium and nickel

In 2017, the International Agency for Research on Cancer classified welding fumes as "carcinogenic to humans" (Group 1). Both mild steel (MS) welding, where fumes lack carcinogenic chromium and nickel, and stainless steel (SS) increase lung cancer risk in welders; therefore, further research to better understand the toxicity of the individual metals is needed. The objectives were to (1) compare the pulmonary toxicity of chromium (as Cr(III) oxide [Cr2O3] and Cr (VI) calcium chromate [CaCrO4]), nickel [II] oxide (NiO), iron [III] oxide (Fe2O3), and gas metal arc welding-SS (GMAW-SS) fume; and (2) determine if these metal oxides can promote lung tumors. Lung tumor susceptible A/J mice (male, 4-5 weeks old) were exposed by oropharyngeal aspiration to vehicle, GMAW-SS fume (1.7 mg), or a low or high dose of surrogate metal oxides based on the respective weight percent of each metal in the fume: Cr2O3 + CaCrO4 (366 + 5 μg and 731 + 11 μg), NiO (141 and 281 μg), or Fe2O3 (1 and 2 mg). Bronchoalveolar lavage, histopathology, and lung/liver qPCR were done at 1, 7, 28, and 84 days post-aspiration. In a two-stage lung carcinogenesis model, mice were initiated with 3-methylcholanthrene (10 μg/g; intraperitoneal; 1x) or corn oil then exposed to metal oxides or vehicle (1 x/week for 5 weeks) by oropharyngeal aspiration. Lung tumors were counted at 30 weeks post-initiation. Results indicate the inflammatory potential of the metal oxides was Fe2O3 > Cr2O3 + CaCrO4 > NiO. Overall, the pneumotoxic effects were negligible for NiO, acute but not persistent for Cr2O3 + CaCrO4, and persistent for the Fe2O3 exposures. Fe2O3, but not Cr2O3 + CaCrO4 or NiO significantly promoted lung tumors. These results provide experimental evidence that Fe2O3 is an important mediator of welding fume toxicity and support epidemiological findings and the IARC classification.

Toxicological Antagonism among Welding Fume Metals: Inactivation of Soluble Cr(VI) by Iron

Epidemiological studies in chromate production have established hexavalent chromium as a potent lung carcinogen. Inhalation of chromium(VI) most often occurs in mixtures with other metals as among stainless steel welders, which is the largest occupational group with Cr(VI) exposure. Surprisingly, carcinogenicity of Cr(VI)-containing welding fumes is moderate and not consistently higher than that of Cr-free welding. Here, we investigated interactions between chromate and three other metal ions [Fe(III), Mn(II), Ni(II)] that are typically released from stainless steel welding particles. In human lung epithelial cells with physiological levels of ascorbate and glutathione, Cr(VI) was by far the most cytotoxic metal in single exposures. Coexposure with Fe(III) suppressed cytotoxicity and genotoxicity of Cr(VI), which resulted from a severe inhibition of Cr uptake by cells and required extracellular ascorbate/glutathione. Chemically, detoxification of Cr(VI) occurred via its rapid extracellular reduction by Fe(II) that primarily originated from ascorbate-reduced Fe(III). Glutathione was a significant contributor to reduction of Cr(VI) by Fe only in the presence of ascorbate. We further found that variability in Cr(VI) metabolism among common cell culture media was caused by their different Fe content. Ni(II) and Mn(II) had no detectable effects on metabolism, cellular uptake or cytotoxicity of Cr(VI). The main biological findings were confirmed in three human lung cell lines, including stem cell-like and primary cells. We discovered extracellular detoxification of carcinogenic chromate in coexposures with Fe(III) ions and identified the underlying chemical mechanism. Our findings established an important case when exposure to mixtures causes inactivation of a potent human carcinogen.