Metal organic frameworks for sensing applications

Point-of-care colorimetric biosensor for H2O2 and glucose detection utilizing the peroxidase-like activity of 2D bimetallic metal organic framework nanosheets

BACKGROUND

The applications of natural enzymes are vast, limited only by their protein nature. Therefore, the development of artificial enzyme mimetics, nanozymes, which are stable and have improved activity, has become indispensable for biomedical and diagnostic purposes. Nanozymes have developed into an emergent topic combining nanotechnology and biology due to their vast range of potential uses. In comparison to natural peroxidase, peroxidase-imitating nanozymes have distinct benefits in terms of high stability and low cost for applications in bioanalysis and environmental remediation. The use of metal-organic framework nanoparticles has exhibited enhanced catalytic and enzymatic performance.

RESULTS

In the current work, we present a strategy for synthesizing 2D Ni/Co MOF nanoparticles that have been anchored onto carboxymethyl cellulose (CMC). The resulting composite (Ni/Co-MOF@CMC) 2D nanosheets exhibit a high surface area and abundant catalytic sites, greatly amplifying their peroxidase-like catalytic performance. Additionally, these 2D bimetallic MOFs mimic the peroxidase activity, demonstrated by the distinctive yellow colour upon the oxidation of o-Phenylenediamine (OPD) by hydrogen peroxide. This newly synthesized 2D bimetallic MOF provides a straightforward, simple, selective, and sensitive colorimetric analysis technique for the determination of hydrogen peroxide and glucose. H2O2 could be efficiently detected with a linear range of 10 μM-800 μM and a lower detection limit of 3.28 μM. With the potential to detect minute glucose concentrations as low as 200 μM within a linear range of 200 μM-600 μM.

SIGNIFICANCE AND NOVELTY

This work demonstrates the significant novelty of applying an RGB colour sensor (TCS34725) for the quantitative measurement of H2O2 and glucose which holds great potential as a point-of-care platform for diabetic patients. Consequently, our approach broadens the use of MOFs in biosensing and presents a viable substitute for affordable, and easily accessible diabetes monitoring. These 2D bimetallic MOFs are promising materials for glucose detection applications, expanding the utility of MOFs to include biosensor applications.

β-cyclodextrin cross-linked metal organic frameworks as a new sensing candidate for donepezil hydrochloride potentiometric sensors

Screen-printing is a well-established promising technology for large scale production of planner disposable electrochemical sensors. The present study aims to fabricate a novel donepezil hydrochloride (DPH) screen-printed sensor integrated with the cross-linked β-cyclodextrin-functionalized aluminum metal organic framework-multiwall carbon nanotubes nanocomposites (β-CD/MOF/MWCNTs) as a novel sensing element. The fabricated disposable sensors exhibit theoretical Nernstian compliance value of 60.7 ± 1.5 mV decade-1 within a linear dynamic concentration range from 10-6 to 10-2 mol L-1 and limit of detection 7.0 × 10 -7 molL-1. The DPH disposable sensors show high potential stability with a prolonged operational lifetime and the fast response time of 6 s. The presented electrochemical sensors represent an efficient analytical tool for fast and sensitive assay of DPH residues in the marketed pharmaceutical tablets and biological samples with acceptable average recoveries under direct potentiometric measurements, flow injection analysis (FIA), and potentiometric titration. Moreover, the dissolution and degradation studies of DPH can be monitored by the presented disposable sensors.

Enhanced biochemical sensing using metallic nanoclusters integrated with metal-organic frameworks (NCs@MOFs): a comprehensive review

In biochemical sensing, substantial progress has been achieved in the design, development, and application of metallic nanoclusters (NCs) and metal-organic frameworks (MOFs) as distinct entities. Integration of these two nanostructured materials is a promising strategy to form innovative composites with improved properties. Some improvements include (i) supporting platform to minimize the aggregation of NCs and enhance the emission efficiency; (ii) dual-emitting NCs@MOFs from the fluorescent/non-fluorescent MOFs and/or fluorescent NCs; and (iii) stability enhancement. These improvements increase the sensitivity, signal-to-noise ratio, and color tonality, lower the limit of detection, and improve other analytical figures of merits. In this review, we outline the preparation methods of NCs@MOF composites with the improvements offered by them in the field of biochemical analysis. Analytical applications in different fields, such as bioanalysis, environmental monitoring and food safety, are presented. Finally, we address the challenges that remain in the development and application of these composites, such as ensuring stability, enhancing the fluorescence intensity, and improving selectivity and scalability. Furthermore, perspectives on future research directions in this rapidly evolving field are offered.

Chitosan and carboxymethyl cellulose coated on NH2-UiO-66 as green, biocompatible, nontoxic, and pH-stimuli responsive for levofloxacin delivery: A comparative study

Recently, developing an efficient and green approach to overcoming bacterial resistance in drug delivery systems has remained a significant challenge. This work is supposed to design and create two novel, green, biocompatible nanocarriers by incorporating levofloxacin-loaded NH2-UiO-66 into the chitosan and carboxymethyl cellulose biopolymers. The structural characteristics and antibacterial activity of the synthesized carriers were analyzed using FT-IR, SEM, BET, XRD, TGA-DTA, zeta potential, DLS, swelling analysis, ZOI, MIC, MBC, and MTT techniques. The in vitro release rate of the levofloxacin at acidic and neutral environments from the NH2-UiO-66/levofloxacin/carboxymethyl cellulose was 78±2.1% and 18±1.9% and from the NH2-UiO-66/levofloxacin/chitosan was 86±3.5% and 69±2.9% respectively, over 72 h. Kinetics studies showed that the Corsmeyer-Peppas and Higuchi models predicted the release mechanisms of NH2-UiO-66/levofloxacin/carboxymethyl cellulose (R2=0.97) and NH2-UiO-66/levofloxacin/chitosan nanocarriers R2=0.97, respectively. Additionally, studies of the antibacterial properties showed that two NH2-UiO-66/levofloxacin/carboxymethyl cellulose and NH2-UiO-66/levofloxacin/chitosan nanocarriers were more effective against Staphylococcus aureus bacteria than Escherichia coli bacteria. The MTT assay showed that after 48 h, the NH2-UiO-66/levofloxacin/carboxymethyl cellulose nanocarrier with a concentration of 8 mg/mL exhibited lower cell viability compared to the NH2-UiO-66/levofloxacin/chitosan nanocarrier. Overall, these developed nanocarriers hold promise as advanced drug delivery systems due to their strong antibacterial properties.

Two ratiometric fluorescent sensors originating from functionalized R6G@UiO-66s for selective determination of formaldehyde and amine compounds

Residual small amounts of harmful substances in food or medicine are potential threats to human health. In this work, amino-functionalized UiO-66 was firstly prepared, namely UiO-66-(a), then it was further treated with phosgene to obtain UiO-66-(b) with abundant carboxyl groups. By doping, the fluorescent Rhodamine 6G (R6G) was incorporated into the structures of the two functional UiO-66s to obtain R6G@UiO-66-(a) and R6G@UiO-66-(b), respectively. These two materials can both emit fluorescence based on UiO-66s and R6G, therefore, were employed as fluorescent probes to construct two ratiometric fluorescent sensors to detect formaldehyde and amine compounds, respectively. Based on the aldehyde-amine condensation reaction between -NH2 and -CHO and the specific condensation reaction between -COOH and -NH2, formaldehyde molecules and amine compounds can react with these two materials, respectively. Causing a change in the relative fluorescence intensity of functionalized MOFs, resulting in selective detection of formaldehyde and amine compounds with the detection limit of 0.058 μM and 0.0017 μM (ethylenediamine), respectively. These two ratiometric fluorescent probes were successfully applied for quantitative detection of formaldehyde in beer and ethylenediamine in anti-inflammatory agents, demonstrating great practical potential for residual hazardous substance monitoring in food or medicine.

Computational and Experimental Study of Metal-Organic Frameworks (MOFs) as Antimicrobial Agents against Neisseria gonorrhoeae

The emergence of drug-resistant superbugs poses a critical global health threat, necessitating innovative treatment strategies. Neisseria gonorrhoeae (Ng) causes a sexually transmitted disease called gonorrhea, and the bacterium has shown alarming resistance to conventional antibiotics, underscoring the urgent need for novel therapeutic approaches. In the current study, we interfaced computational biology and materials science to investigate the interactions between in-house synthesized metal-organic frameworks (MOFs) and the penicillin-binding protein 2 (PBP2) of Ng, a key target for β-lactam antibiotics. Using molecular docking and interaction analyses, we identified three promising MOFs, namely, Fe-BDC-258445, Cu-BDC-687690, and Ni-BDC-638866, with optimum binding scores and stable interactions. These scores indicated strong interactions with PBP2, suggesting their potential as therapeutic agents. Antimicrobial screening using a standard disk diffusion assay demonstrated that the Cu-BDC MOFs were bactericidal for multiple strains of Ng, whereas the Ni-BDC and Fe-BDC MOFs were nonbactericidal. The Cu-BDC MOF did not kill other Gram-negative bacteria, thus demonstrating specificity for Ng, and showed low toxicity for human Chang conjunctival epithelial cells in vitro. No significant leaching with biological activity was observed for the Cu-BDC MOF, and microscopy demonstrated the loss of gonococcal piliation and damage to the cell membrane. These findings underscore the potential of Cu-BDC MOFs as antimicrobial agents for further development.

A review of metal-organic frameworks and polymers in mixed matrix membranes for CO2 capture

Polymeric membranes offer an appealing solution for sustainable CO2 capture, with potential for large-scale deployment. However, balancing high permeability and selectivity is an inherent challenge for pristine membranes. To address this challenge, the development of mixed matrix membranes (MMMs) is a promising strategy. MMMs are obtained by carefully integrating porous nano-fillers into polymeric matrices, enabling the simultaneous enhancement of selectivity and permeability. In particular, metal-organic frameworks (MOFs) have gained recognition as MMM fillers for CO2 capture. Here, a review of the current state, recent advancements, and challenges in the fabrication and engineering of MMMs with MOFs for selective CO2 capture is proposed. Key considerations and promising research directions to fully exploit the gas separation potential of MOF-based MMMs in CO2 capture applications are highlighted.

Synthesis of metal-organic framework-luminescent guest (MOF@LG) composites and their applications in environmental health sensing: A mini review

Metal-organic framework (MOF) materials are three-dimensional structures formed by the combination of metal ions and organic ligands. So far, various typical metal organic framework materials have emerged, such as ZIF-8, MOF-5, UIO-66, etc. These traditional MOF materials have the advantages of simple synthesis, high porosity, and high stability, and have great research potential in the field of fluorescence sensing. However, MOF materials with excellent luminescent properties often involve fine regulation of organic ligands to ensure that fluorescence emission can be achieved between metal ions and organic ligands through energy transfer and photo induced electron transfer. The long synthesis cycle and cumbersome preparation process pose challenges for the research of fluorescent MOF materials. Combining MOF materials with luminescent guests is an effective way to prepare simple fluorescent chemical sensors. These luminescent guests include quantum dots, organic dyes, fluorescent nanoparticles, etc. They have the characteristic of high luminescence quantum yield, but high concentrations often lead to aggregation and collision, which in turn cause emission quenching. MOF materials with excellent porosity and specific surface area can serve as an ideal platform for encapsulating luminescent guests and preventing their aggregation. The preparation of MOF@luminescent guest composite material (MOF@LG) is easy to synthesize, which not only effectively improves the poor fluorescence performance of MOFs themselves, but also preserves the excellent fluorescence performance of luminescent guests. Composite materials often have excellent solid-state luminescence performance, making them a good choice for constructing a simple fluorescence sensing platform.

Advanced design of chemically modified electrodes for the electrochemical analysis of uric acid and xanthine

This study reviews advances in chemical detection methods applied to the metabolic products known as uric acid (UA) and xanthine (XA), which are residues of purine metabolism, with XA being an important intermediate preceding UA. UA and XA play crucial roles in maintaining physiological homeostasis in organisms. Chemical modification of electrodes is a widely used method to address the issues of poor sensitivity and selectivity encountered with bare electrodes. This article reviews various materials commonly used to modify electrode surfaces for the detection of uric acid and xanthine, focusing on properties that enhance electrocatalytic activity. We highlight recent trends in detecting these compounds using electrochemical methods with microfabricated devices and explore cutting-edge modification techniques involving novel nanomaterials, carbon derivatives, metallic nanoparticles, and polymers. The review includes a comparative analysis of these materials, addressing their strengths, limitations, and recent advancements, such as in carbon-based materials and metal-organic frameworks (MOFs). Finally, we critically examine the challenges and future prospects of electrochemical detection of UA and XA in real samples, offering strategies to address these issues. The challenges associated with determination of UA and XA in real samples are also discussed.

Innovative cross-linked electrospun PVA/MOF nanocomposites for removal of cefixime antibiotic

In this study, we synthesized two nanocomposites, cross-linked PVA/HKUST and PVA/ZIF-67, by integrating metal-organic frameworks (MOFs) into electrospun polyvinyl alcohol (PVA). Several characterization techniques including FTIR, XRD, ICP, SEM, TGA, UV-Vis, zeta potential, and N2 adsorption-desorption were employed. The adsorption performance of the composites for cefixime (CFX) removal was assessed under varying conditions such as MOF content, contact time, pH, initial CFX concentration, and temperature. ZIF-67 and HKUST contribute to the high adsorption efficiency of the composites by providing a porous structure with high surface area, facilitating interactions with CFX molecules, and enhancing the overall stability of the composite material in the removal process. The Langmuir isotherm model revealed a maximum adsorption capacity of 282.5 mg/g for PVA/HKUST and 211.4 mg/g for PVA/ZIF-67. Notably, CFX was rapidly removed within 50 min, demonstrating the high potential of these nanofibers in wastewater treatment. However, after six cycles, removal efficiencies declined from 88 to 74% for PVA/HKUST and from 85 to 59% for PVA/ZIF-67.

An aptamer sensor based on AgNPs@MOF for surface-enhanced Raman spectroscopy detection of sulfadimethoxine in food

A highly sensitive aptamer sensor (aptasensor) is proposed based on metal-organic frameworks-silver nanoparticles (AgNPs@MOF) to detect sulfadimethoxine (SDM) by surface-enhanced Raman spectroscopy (SERS). AgNPs@MOF with SERS activity was successfully fabricated by synthesizing AgNPs in situ on the surface of MIL-101(Fe), and SDM aptamer and Raman reporter 4-aminophenthiophenol (4-ATP) were selected as specific recognition elements and signal probes, respectively. When SDM was absent, the SDM aptamers were effectively adsorbed on the surface of AgNPs@MOF, thus keeping AgNPs@MOF in a dispersed state, resulting in a weakened SERS signal of 4-ATP. In the presence of SDM, the combination of SDM and aptamer formed a rigid hairpin SDM-aptamer complex, which bound less to AgNPs@MOF. Therefore, fewer aptamers were adsorbed on AgNPs@MOF, which exposed more hot spots, resulting in an enhanced SERS signal of 4-ATP. The aptasensor had good selectivity and sensitivity towards SDM and a good linear relationship between SERS intensity and SDM concentration in the range 6.00-150.00 ng/mL, with the limit of detection as low as 2.73 ng/mL. Further application to honey and chicken samples spiked with SDM resulted in satisfactory recoveries, and the aptasensor showed good stability and reproducibility in real samples. The aptasensor based on AgNPs@MOF was proposed for the first time to detect trace SDM by SERS, which provided a favorable way to develop various sensing platforms for antibiotic detection in food safety.

Synthesis and applications of luminescent metal organic frameworks (MOFs) for sensing dipicolinic acid in biological and water samples: a review

The detection of trace quantities of 2,6-dipicolinic acid (DPA) in real-world samples is crucial for early disease diagnosis and routine health monitoring. Metal-organic frameworks (MOFs), recognized for their diverse structural architectures, have emerged as advanced multifunctional hybrid materials. One of the most notable properties of MOFs is their luminescence (L), which can arise from structural ligands, guest molecules, and emissive metal ions. Luminescent MOFs have shown significant promise as platforms for sensor design. This review highlights the application of luminescent MOFs in the detection of DPA in biological and aqueous environments. It provides a comprehensive discussion of the various detection strategies employed in luminescent MOF-based DPA sensors. Additionally, it explores the origins of L in MOFs, their synthesis, and the mechanisms underlying their sensing capabilities. The article also addresses key challenges and limitations in this field, offering practical insights for the development of efficient luminescent MOFs for DPA detection.

Hybrid Metal-Organic Frameworks (MOFs) for Various Catalysis Applications

Porous materials have been gaining popularity in catalysis applications, solving the current ecological challenges. Metal-organic frameworks (MOFs) are especially noteworthy for their high surface areas and customizable chemistry, giving them a wide range of potential applications in catalysis remediation. The review study delves into the various applications of MOFs in catalysis and provides a comprehensive summary. This review thoroughly explores MOF materials, specifically focusing on their diverse catalytic applications, including Lewis catalysis, oxidation, reduction, photocatalysis, and electrocatalysis. Also, this study emphasizes the significance of high-performance MOF materials, which possess adjustable properties and exceptional features, as a novel approach to tackling technological challenges across multiple sectors. MOFs make it an ideal candidate for catalytic reactions, as it enables efficient conversion rates and selectivity. Furthermore, the tunable properties of MOF make it possible to tailor its structure to suit specific catalytic requirements. This feature improves performance and reduces costs associated with traditional catalysts. In conclusion, MOF materials have revolutionized the field of catalysis and offer immense potential in solving various technological challenges across different industries.

Mixed-Linker Zr-Metal-Organic Framework with Improved Lewis Acidic Sites for CO2 Fixation Reaction Catalysis

Applying the mixed-linker strategy in synthesizing metal-organic frameworks (MOFs) has drawn considerable attention as a heterogeneous catalyst owing to their easy synthesis and different functional ligands in their frameworks. Following this strategy, we have developed a mixed linker Zr(IV)-based MOF, [Zr6O4(OH)4(FUM)n(PZDC-NO2)6-n] (PZDC-NO2 = 4-nitro-3,5-pyrazoledicarboxylic acid, FUM = fumaric acid) denoted as MOF-801(PZDC-NO2) synthesized via this strategy which possess an electron-withdrawing group (-NO2) on secondary linkers. The MOF-801(PZDC-NO2) has been fully characterized via various analyses, such as Fourier transform infrared, powder X-ray diffraction, 13C/1H nuclear magnetic resonance, XPS, TGA, and N2 adsorption/desorption, SEM, EDX, etc. By considering the concurrent existence of acid-base active sites and the synergistic role of these sites, this mixed-linker MOF was used as a catalyst for the cycloaddition reaction of CO2 and epoxides under mild without-solvent conditions. MOF-801(PZDC-NO2) displays significant catalytic performance by producing the highest catalytic conversion of epoxide to cyclic carbonate (93%) with a turnover number of 130.7 in 8 h reaction time and 100 °C temperature under low-pressure CO2 pressure. The mixed-linker Zr-MOF exhibits exceptional stability and reusability, maintaining its structure and functionality after consecutive cycles of utilization. Finally, the reaction mechanism was further investigated by density functional theory calculations. The total energy of the reactants, intermediates, and products involved in the process.

Functionalized metal-organic frameworks with biomolecules for sensing and detection applications of food contaminants

The increasing demand for toxin-free food, driven by the rise in fast food consumption and changing dietary habits, necessitates advanced and efficient detection methods to address the potential risks associated with contaminated food. Nanomaterial-based detection methods have shown significant promise, particularly using metal-organic frameworks (MOFs) combined with biomolecules. This review article provides an overview of recent advancements in using functionalized metal-organic frameworks (FMOFs) with biomolecules to detect various food contaminants, including heavy metals, antibiotics, pesticides, bacteria, mycotoxins and other chemical contaminants. We discuss the fundamental principles of detecting food contaminants, evaluate existing analytical techniques, and explore the development of biomacromolecule-functionalized MOF-based sensors encompassing colorimetric, optical, electrochemical, and portable variants. The review also examines sensing mechanisms, uses FMOFs as signal probes and carriers for capture probes, and assesses sensitivity. Additionally, we explore the opportunities and challenges in producing FMOFs with biomacromolecules for food contaminant assessment. Future directions include improving sensor sensitivity and specificity, developing more cost-effective production methods, and integrating these technologies into real-world food safety monitoring systems. This work aims to pave the way for innovative and reliable solutions to ensure the safety of our food supply.

Optimizing post-synthetic metal incorporation in mixed-linker MOFs: insights from metalation studies on bipyridine-containing UiO-67 single crystals

The postsynthetic metalation (PSM) of metal-organic frameworks (MOFs) with intrinsic metal binding sites is an intriguing strategy to introduce catalytic function into MOFs. The spatial distribution of the catalytic sites within the MOF crystal will affect the efficiency of the material, but the factors that govern depth distribution of the introduced metal sites are often not well understood. Herein, we employ Rutherford backscattering spectrometry (RBS) to investigate the metal distribution in a series of post-synthetically metalated mixed linker bpdc/BPY UiO-67 (UiO = Universitet i Oslo, bpdc = biphenyl-dicarboxylate, BPY = 2,2'-bipyridine-5,5'-dicarboxylate) single crystals as a function of linker ratio and metalation time. The RBS spectra reveal large differences in the depth distribution of inserted Ni2+ ions, and core/shell architectures are observed in high BPY materials at shorter incubation times. The incubation times to achieve uniform metal incorporation increases with increasing BPY ratios in the materials, suggesting that the presence of the BPY linkers slow down metal uptake. We propose a combination of ionic interactions and pore clogging, where coordinated ions reduce the available pore space for further ions to diffuse deeper into the framework as reasons for the observed trends. The observations are likely relevant for other mixed-linker MOF systems, and understanding the effect that linker ratios have on PSM and cation distribution will aid in future optimizations of catalytic MOFs.

Recent advances on nanomaterial-based glutathione sensors

Glutathione (GSH) is one of the most common thiol-containing molecules discovered in biological systems, and it plays an important role in many cellular functions, where changes in physiological glutathione levels contribute to the progress of a variety of diseases. Molecular imaging employing fluorescent probes is thought to be a sensitive technique for online fluorescence detection of GSH. Although various molecular probes for (intracellular) GSH sensing have been reported, some aspects remain unanswered, such as quantitative intracellular analysis, dynamic monitoring, and compatibility with biological environment. Some of these drawbacks can be overcome by sensors based on nanostructured materials, that have attracted considerable attention owing to their exceptional properties, including a large surface area, heightened electro-catalytic activity, and robust mechanical resilience, for which they have become integral components in the development of highly sensitive chemo- and biosensors. Additionally, engineered nanomaterials have demonstrated significant promise in enhancing the precision of disease diagnosis and refining treatment specificity. The aim of this review is to investigate recent advancements in fabricated nanomaterials tailored for detecting GSH. Specifically, it examines various material categories, encompassing carbon, polymeric, quantum dots (QDs), covalent organic frameworks (COFs), metal-organic frameworks (MOFs), metal-based, and silicon-based nanomaterials, applied in the fabrication of chemo- and biosensors. The fabrication of nano-biosensors, mechanisms, and methodologies employed for GSH detection utilizing these fabricated nanomaterials will also be elucidated. Remarkably, there is a noticeable absence of existing reviews specifically dedicated to the nanomaterials for GSH detection since they are not comprehensive in the case of nano-fabrication, mechanisms and methodologies of detection, as well as applications in various biological environments. This research gap presents an opportune moment to thoroughly assess the potential of nanomaterial-based approaches in advancing GSH detection methodologies.

Recent research progress in tetrodotoxin detection and quantitative analysis methods

Tetrodotoxin (TTX) is a highly potent and widely distributed ion-channel marine neurotoxin; it has no specific antidote and poses a great risk to human health. Therefore, detecting and quantifying TTX to effectively implement prevention strategies is important for food safety. The development of novel and highly sensitive, highly specific, rapid, and simple techniques for trace TTX detection has attracted widespread attention. This review summarizes the latest advances in the detection and quantitative analysis of TTX, covering detection methods based on biological and cellular sensors, immunoassays and immunosensors, aptamers, and liquid chromatography-mass spectrometry. It further discusses the advantages and applications of various detection technologies developed for TTX and focuses on the frontier areas and development directions of TTX detection, providing relevant information for further investigations.

Recent Trends and Advances in Porous Metal-Organic Framework Nanostructures for the Electrochemical and Optical Sensing of Heavy Metals in Water

With the expansion and advancement in agricultural and chemical industries, various toxic heavy metals such as lead, cadmium, mercury, zinc, copper, arsenic etc. are continuously released into the environment. Intake of sources contaminated with such toxic metals leads to various health issues. Keeping the serious effects of these toxic metal ions in view, various organic-inorganic nanomaterials based sensors have been exploited for their detection via optical, electrochemical and colorimetric approaches. Since a chemical sensor works on the principle of interaction between the sensing layer and the analytes, a sensor material with large surface area is required to enable the largest possible interaction with the target molecules and hence the sensitivity of the chemical sensor. However, commonly employed materials such as metal oxides and conducting polymers tend to feature relatively low surface areas, and hence resulting in low sensitivity of the sensor. Metal-Organic Frameworks (MOFs) nanostructures are another category of organic-inorganic materials endowed with large surface area, ultra-high and tunable porosity, post-synthesis modification features, readily available active sites, catalytic activity, and chemical/thermal stability. These properties provide high sensitivity to the MOF based sensors due to the adsorption of large number of target analytes. The current review article focuses on MOFs based optical and electrochemical sensors for the detection of heavy metals.

Synthesis and characterisation of antimicrobial metal-organic frameworks as multi-drug carriers

Antibiotic resistance is a significant global concern, necessitating the development of either new antibiotics or advanced delivery methods. With this in mind, we report on the synthesis and characterisation of a new family of Metal-Organic Frameworks (MOFs), OnG6 MOFs, designed to act as multi-drug carriers for bacterial infection treatment. OnG6 is based on the pro-drug 4,4'-azodisalicylic acid (AZDH4), which in vivo produces two equivalents of para-aminosalicylic acid (ASA), a crucial drug for M. tuberculosis treatment. X-ray and computational studies revealed that OnG6 MOFs are mesoporous MOFs with etb topology and an [M2(AZD)] formula (M = Zn, OnG6-Zn; Mg, OnG6-Mg; Cu, OnG6-Cu; and Co, OnG6-Co), featuring 1-dimensional channel type pores of 25 Å diameter. OnG6 MOFs are the first reported MOFs bearing the ligand AZDH4, joining the family of mesoporous MOFs arranged in a honeycomb pattern. They absorb isoniazid (INH) and ciprofloxacin (CIPRO) with the former being a specific antibiotic for M. tuberculosis, and the latter being a broader-spectrum antibiotic. The stability of the MOFs and their capacity for antibiotic uptake depend on the nature of the metal ion, with OnG6-Mg demonstrating the highest drug absorption. The antimicrobial activity of these species was assessed against S. aureus and E. coli, revealing that the carriers containing CIPRO displayed optimal efficacy.

Efficient Turn-On Zr Based Metal Organic Framework Fluorescent Sensor for Ultrafast Detection of Danofloxacin in Milk Samples

Metal organic framework, UiO-67 was synthesized by coordinating Zr(IV) with 4,4'-biphenyldicarboxylic acid (BPDC) ligand. Morphology and crystallinity of MOF was confirmed with FE-SEM and PXRD procedure. Danofloxacin (DANO), a veterinary fluoroquinolone antibiotic, was detected in milk by employing UiO-67 as "turn-on" fluorescent sensor. Original photoluminescent (PL) efficiency of UiO-67 sensor was enhanced on its electronic interaction with DANO molecule. Significant PL efficiency enhancement, lower detection limit 0.49 ng/mL (1.37 nM), swift detection (time < 1 min), and excellent linear correlation (R2 = 0.9988) indicated extraordinary sensitivity of developed UiO-67 sensor for DANO. Selectivity and performance of sensor was unaltered in presence of interfering species and detection results were obtained under permissible variation limits. Method applied successfully for ultra-trace detection of DANO residues in milk samples.

Photocatalytic systems: reactions, mechanism, and applications

The photocatalytic field revolves around the utilization of photon energy to initiate various chemical reactions using non-adsorbing substrates, through processes such as single electron transfer, energy transfer, or atom transfer. The efficiency of this field depends on the capacity of a light-absorbing metal complex, organic molecule, or substance (commonly referred to as photocatalysts or PCs) to execute these processes. Photoredox techniques utilize photocatalysts, which possess the essential characteristic of functioning as both an oxidizing and a reducing agent upon activation. In addition, it is commonly observed that photocatalysts exhibit optimal performance when irradiated with low-energy light sources, while still retaining their catalytic activity under ambient temperatures. The implementation of photoredox catalysis has resuscitated an array of synthesis realms, including but not limited to radical chemistry and photochemistry, ultimately affording prospects for the development of the reactions. Also, photoredox catalysis is utilized to resolve numerous challenges encountered in medicinal chemistry, as well as natural product synthesis. Moreover, its applications extend across diverse domains encompassing organic chemistry and catalysis. The significance of photoredox catalysts is rooted in their utilization across various fields, including biomedicine, environmental pollution management, and water purification. Of course, recently, research has evaluated photocatalysts in terms of cost, recyclability, and pollution of some photocatalysts and dyes from an environmental point of view. According to these new studies, there is a need for critical studies and reviews on photocatalysts and photocatalytic processes to provide a solution to reduce these limitations. As a future perspective for research on photocatalysts, it is necessary to put the goals of researchers on studies to overcome the limitations of the application and efficiency of photocatalysts to promote their use on a large scale for the development of industrial activities. Given the significant implications of the subject matter, this review seeks to delve into the fundamental tenets of the photocatalyst domain and its associated practical use cases. This review endeavors to demonstrate the prospective of a powerful tool known as photochemical catalysis and elucidate its underlying tenets. Additionally, another goal of this review is to expound upon the various applications of photocatalysts.

COVID-19 electrochemical immunosensor with Ag-MOF: Rapid and high-selectivity nasal swab testing for effective detection

Early detection of the coronavirus is acknowledged as a crucial measure to mitigate the spread of the pandemic, facilitating timely isolation of infected individuals, and disrupting the transmission chain. In this study, we leveraged the properties of synthesized Ag-MOF, including high porosity and increased flow intensity. Electrochemical techniques such as cyclic voltammetry (CV) and differential pulse voltammetry (DPV) were employed to develop an economical and portable sensor with exceptional selectivity for COVID-19 detection. The methodology involves the deposition of Ag-MOF onto the surface of a Glassy Carbon Electrode (GCE), which resulted in a progressive augmentation of electric current. Subsequently, the targeted antibodies were applied, and relevant tests were conducted. The sensor demonstrated the capacity to detect the virus within a linear range of 100 fM to 10 nM, boasting a noteworthy Limit of Detection (LOD) of 60 fM. The entire detection process could be completed in a brief duration of 20 min, exhibiting high levels of accuracy and precision, outperforming comparable techniques in terms of speed and efficacy.

Naphthalimide functionalized metal-organic framework for rapid and nanomolar level detection of hydrazine and anti-hypertensive drug nicardipine

The increasing utilization of hydrazine and its derivatives across diverse sectors highlights the pressing need for efficient detection methods to safeguard human health and the environment. Likewise, nicardipine, a widely used medication for heart diseases, necessitates accurate sensing techniques for clinical research and therapeutic monitoring. Here, we propose a novel approach using a naphthalimide-functionalized Zr-MOF as a fluorometric probe capable of detecting both hydrazine and nicardipine in aqueous medium. Our designed probe exhibited a significant 31-fold increase in fluorescence intensity upon interaction with hydrazine. At the same time, nicardipine induced 86% fluorescence quenching with an exceptionally rapid response time (100 s for hydrazine and 5 s for nicardipine). The designed probe has the ability to detect both analytes at nanomolar concentrations (LOD for hydrazine is 1.11 nM while that for nicardipine is 9.6 nM). Investigation across various wastewater samples and pH conditions further validated its practical utility. The mechanism behind fluorometric sensing of nicardipine was thoroughly investigated using modern instrumentation. Our study presents a versatile and effective approach for detecting hydrazine and nicardipine, addressing crucial needs in both industrial and biomedical contexts.

Recent advancements in the specific determination of carcinoembryonic antigens using MOF-based immunosensors

Carcinoembryonic antigens (CEAs) are prominent cancer biomarkers that enable the early detection of numerous cancers. For effective CEA screening, rapid, portable, efficient, and sensitive diagnosis approaches should be devised. Metal-organic frameworks (MOFs) are porous crystalline materials that have received major attention for application in high-efficiency signal probes owing to their advantages such as large specific surface area, superior chemical stability and tunability, high porosity, easy surface functional modification, and adjustable size and morphology. Immunoassay strategies using antigen-antibody specific interaction are one of the imperative means for rapid and accurate measurement of target molecules in biochemical fields. The emerging MOFs and their nanocomposites are synthesized with excellent features, providing promising potential for immunoassays. This article outlines the recent breakthroughs in the synthesis approaches of MOFs and overall functionalization mechanisms of MOFs with antigen/antibody and their uses in the CEA immunoassays, which operate according to electrochemical, electrochemiluminescent and colorimetric techniques. The prospects and limitations of the preparation and immunoassay applications of MOF-derived hybrid nanocomposites are also discussed at the end.

Design and application of metal organic frameworks for heavy metals adsorption in water: a review

The growing apprehension surrounding heavy metal pollution in both environmental and industrial contexts has spurred extensive research into adsorption materials aimed at efficient remediation. Among these materials, Metal-Organic Frameworks (MOFs) have risen as versatile and promising contenders due to their adjustable properties, expansive surface areas, and sustainable characteristics, compared to traditional options like activated carbon and zeolites. This exhaustive review delves into the synthesis techniques, structural diversity, and adsorption capabilities of MOFs for the effective removal of heavy metals. The article explores the evolution of MOF design and fabrication methods, highlighting pivotal parameters influencing their adsorption performance, such as pore size, surface area, and the presence of functional groups. In this perspective review, a thorough analysis of various MOFs is presented, emphasizing the crucial role of ligands and metal nodes in adapting MOF properties for heavy metal removal. Moreover, the review delves into recent advancements in MOF-based composites and hybrid materials, shedding light on their heightened adsorption capacities, recyclability, and potential for regeneration. Challenges for optimization, regeneration efficiency and minimizing costs for large-scale applications are discussed.

Advanced Hybrid materials in electrochemical sensors: Combining MOFs and conducting polymers for environmental monitoring

The integration of conducting polymers (CPs) with metal-organic frameworks (MOFs) has arisen as a dynamic and innovative approach to overcome some intrinsic limitations of both materials, representing a transformative method to address the pressing need for high-performance environmental monitoring tools. MOFs, with their intricate structures and versatile functional groups, provide tuneable porosity and an extensive surface area, facilitating the selective adsorption of target analytes. Conversely, CPs, characterized by their exceptional electrical conductivity and redox properties, serve as proficient signal transducers. By combining these two materials, a novel class of hybrid materials emerges, capitalizing on the unique attributes of both components. These MOF/CP hybrids exhibit heightened sensitivity, selectivity, and adaptability, making them primordial in detecting and quantifying environmental contaminants. This review examines the synergy between MOFs and CPs, highlighting recent advancements, challenges, and prospects, thus offering a promising solution for developing advanced functional materials with tailored properties and multifunctionality to be applied in electrochemical sensors for environmental monitoring.

Direct Electrochemical Synthesis of Metal-Organic Frameworks: Cu3 (BTC)2 and Cu(TCPP) on Copper Thin films and Copper-Based Microstructures

Cu thin films and Cu2 O microstructures were partially converted to the Metal-Organic Frameworks (MOFs) Cu3 (BTC)2 or Cu(TCPP) using an electrochemical process with a higher control and at milder conditions compared to the traditional solvothermal MOF synthesis. Initially, either a Cu thin film was sputtered, or different kinds of Cu or Cu2 O microstructures were electrochemically deposited onto a conductive ITO glass substrate. Then, these Cu thin films or Cu-based microstructures were subsequently coated with a thin layer of either Cu3 (BTC)2 or Cu(TCPP) by controlled anodic dissolution of the Cu-based substrate at room temperature and in the presence of the desired organic linker molecules: 1,3,5-benzenetricarboxylic acid (BTC) or photoactive 4,4',4'',4'''-(Porphine-5,10,15,20-tetrayl) tetrakis(benzoic acid) (TCPP) in the electrolyte. An increase in size of the Cu micro cubes with exposed planes [100] of 38,7 % for the Cu2 O@Cu3 (BTC)2 and a 68,9 % increase for the Cu2 O@Cu(TCPP) was roughly estimated. Finally, XRD, Raman spectroscopy and UV-vis absorption spectroscopy were used to characterize the initial Cu films or Cu-based microstructures, and the obtained core-shell Cu2 O@Cu(BTC) and Cu2 O@Cu(TCPP) microstructures.

Sensing potential of C6N8 for ammonia (NH3) and nitrogen triflouride (NF3): A DFT study

The detection of toxic gases (NH3 and NF3) in regulating and monitoring air quality in the atmosphere has drawn a lot of attention. Herein, we explored a novel material (C6N8) for the detection of the important but toxic gases (NH3 and NF3). We investigated the interactions of the NH3 and NF3 with C6N8 through DFT at B3LYP, ωB97XD, and non-DFT M06-2X. Counterpoise interaction energy values (Eint. cp.) of NH3@C6N8 and NF3@C6N8 are -0.45 eV and -3.51 eV (for B3LYP), -0.42 eV and 2.11 eV (for ωB97XD) and -0.44 eV and -3.41eV (for M06-2X), respectively. Complexes having the most stable configurations were then subjected to further analyses including frontier molecular orbitals, H-L gap, and conductivity of complexes. An increase in the H-L gap in complexes (NH3@C6N8 and NF3@C6N8) is observed. The conductivity of NH3@C6N8 and NF3@C6N8 decreases as compared to C6N8. A considerable change in dipole moment was seen in C6N8 before and after complex formation. This is because of the shifting of charge between C6N8 and gases (NH3 and NF3). CHELPG and NBO charge analysis were used to evaluate the amount of charge transfer between C6N8 and gases. These analyses demonstrate that NH3 and NF3 withdraw electron density from C6N8. It was found that NH3 tends to be physically adsorbed on C6N8 while NF3 adsorbs chemically on C6N8. NCI and QTAIM analyses were performed to investigate the kind of interactions between the surface (C6N8) and gases (NH3 and NF3). Furthermore, the recovery time of NH3@C6N8 and NF3@C6N8 shows that C6N8 can be a better choice for sensing NH3 and NF3 gases.

Boron difluoride modified zinc metal-organic framework-based "off-on" fluorescence sensor for tetracycline and Al3+ detection

A novel fluorescence "off-on" probe was developed using a boron difluoride-modified zinc metal-organic framework (Zn-MOF3) for sensitive determination of tetracycline (TC) and Al3+. The Zn-MOF3 has excellent optical property and good applicability in aqueous phase. The fluorescence recorded at 436 nm was quenched at the excitation wavelength of 336 nm. Signal-off detection of tetracycline via fluorescence quenching of Zn-MOF3 is based on the inner filter effect. Fluorescence on-off-on detection of Al3+ occurs via the specific binding between tetracycline and Al3+. The limits of detection for TC and Al3+ were 28.4 nM and 106.7 nM, respectively. This probe exhibited high selectivity which was used for the determination of TC and Al3+ with satisfied recoveries (89.8 to 105.6% for TC, 90.0 to 110.4% for Al3+) and good precision (< 5%) in milk. The developed sensor represents the first "off-on" system for fluorescence detection of TC and Al3+ based on Zn-MOF3 with a better aspect of the innovation.

Pesticides luminescent sensing by a Tb3+-doped Zn metal-organic framework with selectivity towards parathion

Organophosphorus pesticides (OPPs) such as parathion have extensive uses in agriculture and household applications. Chronic exposure to these pesticides can cause severe health and environmental issues. Therefore, a current ecological concern is associated with accumulating these noxious OPPs in food and water sources. In this work, a new Tb3+-doped Zn-LMOF (Zn-LMOF= (3D) {[Zn3(1,4 benzenedicarboxylate)3(EtOH)2]·(EtOH)0.6}∞) was synthesized by a solvent-free reaction between the Zn-LMOF and the salt TbCl3·6H2O using a high-speed ball milling. The Tb@Zn-LMOF was thoroughly characterized by multiple spectroscopic tools, including Scanning Electron Microscopy with Energy-Dispersive X-ray Spectroscopy, and studied in-depth as a luminescent sensor for a series of pesticides (parathion, malathion, methalaxil, carbofuran, iprodione, captan and glyphosate) in aqueous methanol. The Tb@Zn-LMOF is a long-lived green-emitting compound with luminescence originated by an efficient antenna effect from the excited energy levels of Zn-LMOF toward the 5D state of Tb3+ ions, as it is displayed by its strong emission bands at 488, 545, 585, and 620 nm and a lifetime of 1.01 ms upon excitation at 290 nm. Additions of pesticides to a neutral methanolic dispersion of Tb@Zn-LMOF modified its green emission intensity with a pronounced selectivity toward parathion within the micromolar concentration range. The detection limit for parathion was calculated to be 3.04 ± 0.2 μM for Tb@Zn-LMOF. Based on 31P NMR and mass spectrometry studies, it is attributed to the release of lanthanide ions from Tb@Zn-LMOF with the simultaneous formation of a Tb3+-parathion complex.

First-Principles Study on the Selective Separation of Toxic Gases by Mg-MOF-74

This study primarily focused on the detection and separation of toxic gases such as CO, H2S, SO2, NH3, NO, and NO2 by Mg-MOF-74, as well as assessing the stability of those toxic gases on it. The calculations were performed by using density functional theory as implemented in the Gaussian-09 and Quantum ESPRESSO suites of the program. GGA-type PBE-D2 functionals with a plane wave basis set were used in the optimization of the Mg-MOF-74 crystal, and hybrid-type B3LYP and M06 functionals with the 6-31G*basis set were used in cluster calculation. The binding energies of CO and H2S with MOF were found to be in the physisorption range, whereas the energies of SO2, NH3, NO, and NO2 were found to be in the chemisorption range. Based on binding energy, hardness, and softness studies, it was found that NO and NO2 molecules were more stable in Mg-MOF-74, suggesting that Mg-MOF-74 is a good detector for NO and NO2 molecules.

Advances in metal-organic frameworks for water remediation applications

Rapid industrialization and agricultural development have resulted in the accumulation of a variety of harmful contaminants in water resources. Thus, various approaches such as adsorption, photocatalytic degradation and methods for sensing water contaminants have been developed to solve the problem of water pollution. Metal-organic frameworks (MOFs) are a class of coordination networks comprising organic-inorganic hybrid porous materials having organic ligands attached to inorganic metal ions/clusters via coordination bonds. MOFs represent an emerging class of materials for application in water remediation owing to their versatile structural and chemical characteristics, such as well-ordered porous structures, large specific surface area, structural diversity, and tunable sites. The present review is focused on recent advances in various MOFs for application in water remediation via the adsorption and photocatalytic degradation of water contaminants. The sensing of water pollutants using MOFs via different approaches, such as luminescence, electrochemical, colorimetric, and surface-enhanced Raman spectroscopic techniques, is also discussed. The high porosity and chemical tunability of MOFs are the main driving forces for their widespread applications, which have huge potential for their commercial use.

Signal-Amplified Nanobiosensors for Virus Detection Using Advanced Nanomaterials

Rapid diagnosis and treatment of infectious illnesses are crucial for clinical outcomes and public health. Biosensing developments enhance diagnostics at the point of care. This is superior to traditional procedures, which need centralized lab facilities, specialized personnel, and large equipment. The emerging coronavirus epidemic threatens global health and economic security. Increasing viral surveillance and regulatory actions against disease transmission necessitate rapid, sensitive testing tools for viruses. Due to their sensitivity and specificity, biosensors offer a possible reliable and quantifiable viral detection method. Current advances in genetic engineering, such as genetic alteration and material engineering, have provided several opportunities to enhance biosensors' sensitivity, selectivity, and recognition efficiency. This chapter explains biosensing techniques, biosensor varieties, and signal amplification technologies. Challenges and potential developments for viral microorganisms based on biosensors and signal amplification were also investigated.

Size-Regulated Metal-Organic Frameworks with Mercaptobenzothiazole for Ga-Based Liquid Metal Encapsulation: A High Performance Oil-Based Additive

In this study, size-regulated MOFs (MZ) with high MBT loading were successfully synthesized by combining mercaptobenzothiazole (MBT), zinc salt, and 2-methylimidazole (2-MI). Subsequently, the MZ structure was utilized to encapsulate tannic acid-modified gallium-based liquid metal (GLM-TA), thereby acquiring a novel heterogeneous nanocomposite (GLM-TA@MZ). The results revealed that the as-prepared GLM-TA@MZ shows good antiwear and friction-reducing performance as an oil-based lubricant additive, the average friction coefficient was decreased to 0.091, and a wear volume was reduced to 0.95 × 104 μm3, which corresponds to a decrease of 52.3 and 97.2% as compared to base oil PAO. The excellent tribological properties of GLM-TA@MZ can be attributed to physical adsorption on the friction pair, followed by tribochemical reactions. As a result, a thick friction protection film (thickness of about 100 nm) containing Ga, Zn, and S elements was formed, which effectively reduced the contact area between the friction pairs, resulting in improved tribological performance. This study provides insights into the design of MOF-based nanocomposites for lubricating applications.

Exploring the potential of iron-based metal-organic frameworks as peroxidase nanozymes for glucose detection with various secondary building units

Finding materials in biosensing that balance enzyme-like reactivity, stability, and affordability is essential for the future. Because of their unique peroxidase properties, including variable pore size, surface area, and Lewis acid active sites, iron-based metal-organic frameworks (MOFs) have evolved as viable possibilities. In this study, we constructed a Fe-MOF and tested its peroxidase-like activity and responsiveness toward H2O2 colorimetric techniques. Using encapsulation, we incorporated glucose oxidase into the ZIF-90 PVP MOF and conducted a sequential reaction with the Fe-MOF to detect glucose. The results showed better peroxidase catalytic activity of the MIL-88B(Fe) (1,4-NDC) MOF and similar secondary building unit (SBU) Fe-MOFs were studied in other peroxidase nanozyme studies. When combined with an enzyme-encapsulating ZIF-90 PVP MOF, they could be sequentially employed for glucose detection purposes. This study highlights the potential of nanozymes as an alternative to natural enzymes, with promising applications in biosensing and beyond.

Analytical Tools and Methods for Explosive Analysis in Forensics: A Critical Review

This review summarizes (i) compositions and types of improvised explosive devices; (ii) the process of collection, extraction and analysis of explosive evidence encountered in explosive and related cases; (iii) inter-comparison of analytical techniques; (iv) the challenges and prospects of explosive detection technology. The highlights of this study include extensive information regarding the National & International standards specified by USEPA, ASTM, and so on, for explosives detection. The holistic development of analytical tools for explosive analysis ranging from conventional methods to advanced analytical tools is also covered in this article. The most important aspect of this review is to make forensic scientists familiar with the challenges during explosive analysis and the steps to avoid them. The problems during analysis can be analyte-based, that is, interferences due to matrix or added molding/stabilizing agents, trace amount of parent explosives in post-blast samples and many more. Others are techniques-based challenges viz. specificity, selectivity, and sensitivity of the technique. Thus, it has become a primary concern to adopt rapid, field deployable, and highly sensitive techniques.

Designs of metal-organic framework nanoparticles for protein delivery

Recently, there has been high interest in developing metal-organic framework (MOF) nanoparticles (NPs) for delivering therapeutic proteins, propelled mainly by the unique hierarchical porous structures of MOFs for protein encapsulation. Novel design strategies have emerged for broad therapeutic applications and clinical translations, leading to multifunctional MOF-NPs with improved biointerfacing capabilities and higher potency. This review summarizes recent MOF-NP designs specifically for protein delivery. The summary focuses on four design categories, including environment-responsive MOF-NPs for on-demand protein delivery, cell membrane-coated MOF-NPs for biomimetic protein delivery, cascade reaction-incorporated MOF-NPs for combinatorial protein delivery, and composite MOF-NPs for intelligent protein delivery. The major challenges and opportunities in using MOF-NPs for protein delivery are also discussed. Overall, this review will promote designs of MOF-NPs with unique properties to address unmet medical needs.

Ni, Co, Zn, and Cu metal-organic framework-based nanomaterials for electrochemical reduction of CO2: A review

The combustion of fossil fuels has resulted in the amplification of the greenhouse effect, primarily through the release of a substantial quantity of carbon dioxide into the atmosphere. The imperative pursuit of converting CO2 into valuable chemicals through electrochemical techniques has garnered significant attention. Metal-organic frameworks (MOFs) have occured as highly prospective materials for the reduction of CO2, owing to their exceptional attributes including extensive surface area, customizable architectures, pronounced porosity, abundant active sites, and well-distributed metallic nodes. This article commences by elucidating the mechanistic aspects of CO2 reduction, followed by a comprehensive exploration of diverse materials encompassing MOFs based on nickel, cobalt, zinc, and copper for efficient CO2 conversion. Finally, a meticulous discourse encompasses the challenges encountered and the prospects envisioned for the advancement of MOF-based nanomaterials in the realm of electrochemical reduction of CO2.

Aptamer-modified metal organic frameworks for measurement of food contaminants: a review

The measurement of food contaminants faces a great challenge owing to the increasing demand for safe food, increasing consumption of fast food, and rapidly changing patterns of human consumption. As different types of contaminants in food products can pose different levels of threat to human health, it is desirable to develop specific and rapid methods for their identification and quantification. During the past few years, metal-organic framework (MOF)-based materials have been extensively explored in the development of food safety sensors. MOFs are porous crystalline materials with tunable composition, dynamic porosity, and facile surface functionalization. The construction of high-performance biosensors for a range of applications (e.g., food safety, environmental monitoring, and biochemical diagnostics) can thus be promoted through the synergistic combination of MOFs with aptamers. Accordingly, this review article delineates recent innovations achieved for the aptamer-functionalized MOFs toward the detection of food contaminants. First, we describe the basic concepts involved in the detection of food contaminants in terms of the advantages and disadvantages of the commonly used analytical methods (e.g., DNA-based methods (PCR/real-time PCR/multiplex PCR/digital PCR) and protein-based methods (enzyme-linked immunosorbent assay/immunochromatography assay/immunosensor/mass spectrometry). Afterward, the progress in aptamer-functionalized MOF biosensors is discussed with respect to the sensing mechanisms (e.g., the role of MOFs as signal probes and carriers for loading signal probes) along with their performance evaluation (e.g., in terms of sensitivity). We finally discuss challenges and opportunities associated with the development of aptamer-functionalized MOFs for the measurement of food contaminants.

Lanthanide-MOFs as multi-responsive photoluminescence sensor for sensitively detecting Fe3+, Cr2O72- and nitrofuran antibiotics

Fast and selective detection of contaminants plays a key role in meeting human health and environmental concerns. Herein, two groups of isostructural lanthanide MOFs, [Ln(Hpta)(oxalic acid)]·H2O (1-Eu, 2-Gd) and [Ln(pta)(oxalic acid)0.5(H2O)2]·2H2O (3-Eu, 4-Gd) (H2pta = 2-(4-pyridyl)-terephthalic acid, C2O4- = oxalic acid), were synthesized by solvothermal method. Single crystal X-ray diffraction reveals that 1 and 2 are 3D neutral frameworks, while 3 and 4 consist of 2D layers with parallelogram holes and stack into 3D networks through O-H⋯N and O-H⋯O hydrogen bonding interactions. All complexes remain crystalline and stable below 400 °C, suggesting preeminent thermostability. Noteworthily, only 3 shows excellent chemical stability in water and organic solvent. Therefore, the solid-state fluorescence spectrum was used to characterize 3 which exhibited intense red luminescence. The N active sites in the pore channels of 3 are conducive to displaying a distinct quenching effect for Fe3+ cations in aqueous solutions, Cr2O72- anions in DMF and DMA solutions, and nitrofuran antibiotics in the DMF solvent. Overall, 3 is a prospective luminescent sensor for detecting Fe3+, Cr2O72- and nitrofuran antibiotics.

Recent progress in high-performance environmental impacts of the removal of radionuclides from wastewater based on metal-organic frameworks: a review

The nuclear industry is rapidly developing and the effective management of nuclear waste and monitoring the nuclear fuel cycle are crucial. The presence of various radionuclides such as uranium (U), europium (Eu), technetium (Tc), iodine (I), thorium (Th), cesium (Cs), and strontium (Sr) in the environment is a major concern, and the development of materials with high adsorption capacity and selectivity is essential for their effective removal. Metal-organic frameworks (MOFs) have recently emerged as promising materials for removing radioactive elements from water resources due to their unique properties such as tunable pore size, high surface area, and chemical structure. This review provides an extensive analysis of the potential of MOFs as adsorbents for purifying various radionuclides rather than using different techniques such as precipitation, filtration, ion exchange, electrolysis, solvent extraction, and flotation. This review discusses various MOF fabrication methods, focusing on minimizing environmental impacts when using organic solvents and solvent-free methods, and covers the mechanism of MOF adsorption towards radionuclides, including macroscopic and microscopic views. It also examines the effectiveness of MOFs in removing radionuclides from wastewater, their behavior on exposure to high radiation, and their renewability and reusability. We conclude by emphasizing the need for further research to optimize the performance of MOFs and expand their use in real-world applications. Overall, this review provides valuable insights into the potential of MOFs as efficient and durable materials for removing radioactive elements from water resources, addressing a critical issue in the nuclear industry.

Alveoli-Like Multifunctional Scaffolds for Optical and Electrochemical In Situ Monitoring of Cellular Responses from Type II Pneumocytes

While breathing, alveoli are exposed to external irritants, which contribute to the pathogenesis of lung disease. Therefore, in situ monitoring of alveolar responses to stimuli of toxicants under in vivo environments is important to understand lung disease. For this purpose, 3D cell cultures are recently employed for examining cellular responses of pulmonary systems exposed to irritants; however, most of them have used ex situ assays requiring cell lysis and fluorescent labeling. Here, an alveoli-like multifunctional scaffold is demonstrated for optical and electrochemical monitoring of cellular responses of pneumocytes. Porous foam with dimensions like the alveoli structure is used as a backbone for the scaffold, wherein electroactive metal-organic framework crystals, optically active gold nanoparticles, and biocompatible hyaluronic acid are integrated. The fabricated multifunctional scaffold allows for label-free detection and real-time monitoring of oxidative stress released in pneumocytes under toxic-conditions via redox-active amperometry and nanospectroscopy. Moreover, cellular behavior can be statistically classified based on fingerprint Raman signals collected from the cells on the scaffold. The developed scaffold is expected to serve as a promising platform to investigate cellular responses and disease pathogenesis, owing to its versatility in monitoring electrical and optical signals from cells in situ in the 3D microenvironments.

Redox active pyridine-3,5-di-carboxylate- and 1,2,3,4-cyclopentane tetra-carboxylate-based cobalt metal-organic frameworks for hybrid supercapacitors

In the pursuit of developing superior energy storage devices, an integrated approach has been advocated to harness the desirable features of both batteries and supercapacitors, particularly their high energy density, and high-power density. Consequently, the emergence of hybrid supercapacitors has become a subject of increasing interest, as they offer the potential to merge the complementary attributes of these two technologies into a single device, thereby surpassing the limitations of conventional energy storage systems. In this context the Metal-Organic Frameworks (MOFs), consisting of metal centers and organic linkers, have emerged as highly trending materials for energy storage by virtue of their high porosity. Here, we investigate the electrochemical performance of cobalt-pyridine-3,5-di-carboxylate-MOF (Co-PDC-MOF) and cobalt-1,2,3,4-cyclopentane tetra-carboxylate-MOF (Co-CPTC-MOF). In the setup involving the analysis of Co-PDC-MOF and Co-CPTC-MOF materials, a configuration comprising three electrodes was utilized. Drawing upon the promising initial properties of CPTC, a battery device was fabricated, comprising Co-CPTC-MOF, and activated carbon (AC) electrodes. Retaining a reversible capacity of 97% the device showcased impressive energy and power density of 20.7 W h g^-1 and 2608.5 W kg^-1, respectively. Dunn's model was employed, to gain deeper insights into the capacitive and diffusive contributions of the device.

Nanoscale designing of metal organic framework moieties as efficient tools for environmental decontamination

Environmental pollutants, being a major and detrimental component of the ecological imbalance, need to be controlled. Serious health issues can get intensified due to contaminants present in the air, water, and soil. Accurate and rapid monitoring of environmental pollutants is imperative for the detoxification of the environment and hence living beings. Metal-organic frameworks (MOFs) are a class of porous and highly diverse adsorbent materials with tunable surface area and diverse functionality. Similarly, the conversion of MOFs into nanoscale regime leads to the formation of nanometal-organic frameworks (NMOFs) with increased selectivity, sensitivity, detection ability, and portability. The present review majorly focuses on a variety of synthetic methods including the ex situ and in situ synthesis of MOF nanocomposites and direct synthesis of NMOFs. Furthermore, a variety of applications such as nanoabsorbent, nanocatalysts, and nanosensors for different dyes, antibiotics, toxic ions, gases, pesticides, etc., are described along with illustrations. An initiative is depicted hereby using nanostructures of MOFs to decontaminate hazardous environmental toxicants.

Computation of Entropy Measures for Metal-Organic Frameworks

Entropy is a thermodynamic function used in chemistry to determine the disorder and irregularities of molecules in a specific system or process. It does this by calculating the possible configurations for each molecule. It is applicable to numerous issues in biology, inorganic and organic chemistry, and other relevant fields. Metal-organic frameworks (MOFs) are a family of molecules that have piqued the curiosity of scientists in recent years. They are extensively researched due to their prospective applications and the increasing amount of information about them. Scientists are constantly discovering novel MOFs, which results in an increasing number of representations every year. Furthermore, new applications for MOFs continue to arise, illustrating the materials' adaptability. This article investigates the characterisation of the metal-organic framework of iron(III) tetra-p-tolyl porphyrin (FeTPyP) and CoBHT (CO) lattice. By constructing these structures with degree-based indices such as the K-Banhatti, redefined Zagreb, and the atom-bond sum connectivity indices, we also employ the information function to compute entropies.

Multifunctional Metal-Organic Framework (MOF)-Based Nanoplatforms for Crop Protection and Growth Promotion

Phytopathogen, pest, weed, and nutrient deficiency cause severe losses to global crop yields every year. As the core engine, agrochemicals drive the continuous development of modern agriculture to meet the demand for agricultural productivity and increase the environmental burden due to inefficient use. With new advances in nanotechnology, introducing nanomaterials into agriculture to realize agrochemical accurate and targeted delivery has brought new opportunities to support the sustainable development of green agriculture. Metal-Organic frameworks (MOFs), which weave metal ions/clusters and organic ligands into porous frameworks, have exhibited significant advantages in constructing biotic/abiotic stimuli-responsive nanoplatforms for controlled agrochemical delivery. This review emphasizes the recent developments of MOF-based nanoplatforms for crop protection, including phytopathogen, pest, and weed control, and crop growth promotion, including fertilizer/plant hormone delivery. Finally, forward-looking perspectives and challenges on MOF-based nanoplatforms for future applications in crop protection and growth promotion are also discussed.

Ratiometric singlet oxygen self-detecting and oxygen self-supplying nanosensor for real-time photodynamic therapy feedback and therapeutic effect enhancement

Integration of singlet oxygen (¹O₂) detection that provides necessary therapeutic feedback into nanotheranostics for hypoxic tumor photodynamic therapy (PDT) is desirable but still challenging. Herein, we report a nanosensor (denominated PAPD) by combining dual-channel ratiometric sensing and oxygen-augmenting strategies, which synergistically realizes real-time ¹O₂ self-detection, O₂ self-supply and enhanced phototherapy. PAPD nanosensor is constructed by encapsulating anthracene-based ¹O₂ sensitive fluorophore (DPA) into porphyrin metal-organic frameworks (PCN-224), decorating gold nanoparticles (AuNPs) as nanoenzymes, and coating polyethylene glycol thiol (PEG-SH) by the Au-S bond. PCN-224 serves as ¹O₂ reference fluorescence (FL) agent and photosensitizer. Once PCN-224-induced ¹O₂ is synthesized, the dual-channel ratiometric FL signal of PAPD actualizes sensitive, accurate and dynamic ¹O₂ visualization and gives real-time therapeutic information correlated with the therapeutic progression. Additionally, the catalase-like activity of PAPD possesses in situ O₂ production via intracellular H₂O₂ decomposition and accelerates ¹O₂ yields for amplifying the tumor cell killing efficiency. Moreover, the ratiometric ¹O₂ self-detection affords the capacity to evaluate the O₂ self-supplying effect in tumor 4T1 cells. Consequently, the rational-designed nanosensor PAPD provides a paradigm for real-time therapeutic evaluation and precise hypoxic tumor treatment clinically.

Two Dual-Function Zr/Hf-MOFs as High-Performance Proton Conductors and Amines Impedance Sensors

In the field of sensing, finding high-performance amine molecular sensors has always been a challenging topic. Here, two highly stable 3D MOFs DUT-67(Hf) and DUT-67(Zr) with large specific surface areas and hierarchical pore structures were conveniently synthesized by solvothermal reaction of ZrCl₄/HfCl₄ with a simple organic ligand, 2,5-thiophene dicarboxylic acid (H₂TDC) according to literature approach. By analyzing TGA data, it was found that the two MOFs have defects (unsaturated metal sites) that can interact with substrates (H₂O and volatile amine gas), which is conducive to proton transfer and amine compound identification. Further experiments showed that at 100 °C and 98% relative humidity (RH), the optimized proton conductivities of DUT-67(Zr) and DUT-67(Hf) can reach the high values of 2.98 × 10^-3 and 3.86 × 10^-3 S cm^-1, respectively. Moreover, the room temperature sensing characteristics of MOFs' to amine gases were evaluated at 68, 85 and 98% RHs, respectively. Impressively, the prepared MOFs-based sensors have the desired stability and higher sensitivity to amines. Under 68% RH, the detection limits of DUT-67(Zr) or DUT-67(Hf) for volatile amine gases were 0.5 (methylamine), 0.5 (dimethylamine) and 1 ppm (trimethylamine), and 0.5 (methylamine), 0.5 (dimethylamine) and 0.5 ppm (trimethylamine), respectively. As far as we know, this is the best performance of ammonia room temperature sensors in the past proton-conductive MOF sensors.

Pyrene, Anthracene, and Naphthalene-Based Azomethines for Fluorimetric Sensing of Nitroaromatic Compounds

Special attention is given to the development of rapid and sensitive detection of nitroaromatic explosives for homeland security and environmental concerns. As part of our contribution to the detection of nitroaromatic explosives, fluorescent materials (A), (B) and (C) were synthesized from the reaction of 1,2-diaminocyclohexane with pyrene-1-carbaldehyde, anthracene-9-carbaldehyde and 2-hydroxy-1-naphthaldehyde, respectively. The structures of the prepared fluorescent azomethine probes were confirmed using FTIR, ¹H-NMR and ¹³C-NMR spectroscopies. The basis of the study is the use of the synthesized materials as fluorescent probes in the photophysical and fluorescence detection of some nitroaromatic explosives. Emission increases occurred due to aggregation caused by π-π stacking in synthesized azomethines. To measure the nitroaromatic detection capabilities of fluorescence probes, fluorescence titration experiments were performed using the photoluminescence spectroscopy. It was observed that compound A containing pyrene ring provided the best emission intensity-increasing effect due to aggregation with the lowest LOD value (14.96 μM) for the sensing of 4-nitrophenol. In compounds B and C, nitrobenzene with the lowest LOD (16.15 μM and 23.49 μM respectively) caused the most regular emission increase, followed by picric acid.