Materials and methods of signal enhancement for spectroscopic whole blood analysis: Novel research overview

Transformative biomedical devices to overcome biomatrix effects

The emergence of high-performance biomedical devices and sensing technologies highlights the technological advancements in the field. Recently during COVID-19 pandemic, biosensors played an important role in medical diagnostics and disease monitoring. In the past few decades, biosensors have made impressive advances in terms of sensing capability, methodology, and applications, and modern biosensors show higher performance and functionality compared to traditional biosensing platforms. Currently, various biomedical devices are already in the market or on the verge of commercialization, such as disposable paper-based devices, lab-on-a-chip devices, wearable sensors, and artificial intelligence-assisted systems, all contributing to the evolution of digital health. Despite the promising features of detection methods for developing practical biosensors, there are substantial barriers to the commercialization of biomedical devices. An important challenge is the matrix effect in the detection of clinical samples. Although achieving low limit of detection values under controlled laboratory conditions is feasible, maintaining performance in real clinical samples is difficult. Matrix molecules present in these samples can interact with analytes, potentially affecting sensitivity, specificity, and sensor response. Approaches to reduce nonspecific adsorption and cross-reactivity are imperative for improving sensor performance. The detection of diagnostic biomarkers in complex biological matrices often requires laborious sample preparation, which may affect accuracy and precision. In this review, we highlight the recent efforts to detect analytes in real samples, both invasively and noninvasively, and underline technological advancements that mitigate the biomatrix effects. We also discuss commercially available biosensors and technologies promising commercial success, highlighting their potential effect on healthcare and diagnostics.

Use of gold/iron metal-organic framework nanoparticles (AuNPs/FeMOF)-modified glassy carbon electrode as an electrochemical sensor for the quantification of risperidone in patient plasma samples

Risperidone (RIS) is one of the most prescribed atypical antipsychotics approved for the treatment of various neuropsychiatric diseases. For the correlation of serum concentration and pharmacological effects of RIS, therapeutic drug monitoring is considered a fundamental concept for clinical application. This paper is provided to develop an electrochemical probe for the determination of RIS in biological samples by modification of glassy carbon electrode (GCE) using gold nanoparticles (AuNPs) and iron metal-organic-frameworks (FeMOFs). This probe fabrication process was characterized with various techniques including Fourier transform infrared (FTIR), emission scanning electron microscopy (FESEM), energy dispersive X-ray (EDX), atomic force microscopy (AFM), and dynamic light scattering (DLS) to confirm the proper synthesis of materials and the sensors designing. The developed probe square-wave voltammetry (SWV) signal was linear upon RIS concentration from 0.02 to 50 µg/mL with a low limit of quantification (LOQ) of 0.02 µg/mL. Based on the validated method, high accuracy and precision, good specificity, and suitable stability of fabricated probes were achieved. As the ultimate step, this method was successfully applied for the quantification of RIS in patients' plasma samples with regular RIS consumption. The fabricated electrochemical demonstrates favorable clinical applicability due to its simplicity, high sensitivity, low sample pretreatment time, and rapid analysis time, making it a promising probe as an alternative to current separation-based methods. Also, the developed probe is cost-effective, as it uses a low amount of materials, decreases sample processing time, and utilizes inexpensive materials, which could remarkably reduce the overall cost of RIS concentration detection in clinical samples. The obtained results showed the potential of the developed probe for fast and reliable detection of RIS in plasma samples.

Advances in stabilization of metallic nanoparticle with biosurfactants- a review on current trends

Recently, research based on new biomaterials for stabilizing metallic nanoparticles has increased due to their greater environmental friendliness and lower health risk. Their stability is often a critical factor influencing their performance and shelf life. Nowadays, the use of biosurfactants is gaining interest due to their sustainable advantages. Biosurfactants are used for various commercial and industrial applications such as food processing, therapeutic applications, agriculture, etc. Biosurfactants create stable coatings surrounding nanoparticles to stop agglomeration and provide long-term stability. The present review study describes a collection of important scientific works on stabilization and capping of metallic nanoparticles as biosurfactants. This review also provides a comprehensive overview of the intrinsic properties and environmental aspects of metal nanoparticles coated with biosurfactants. In addition, future methods and potential solutions for biosurfactant-mediated stabilization in nanoparticle synthesis are also highlighted. The objective of this study is to ensure that the stabilized nanoparticles exhibit biocompatible properties, making them suitable for applications in medicine and biotechnology.

Electrochemical sensing of doxorubicin hydrochloride under sodium alginate antifouling conditions using silver nanoparticles modified glassy carbon electrodes

Doxorubicin (DOX) is a highly effective anticancer drug with a narrow therapeutic window; thus, sensitive and timely detection of DOX is crucial. Using electrodeposition of silver nanoparticles (AgNPs) and electropolymerization of alginate (Alg) layers on the surface of a glassy carbon electrode, a novel electrochemical probe was constructed (GCE). The fabricated AgNPs/poly-Alg-modified GCE probe was utilized for the quantification of DOX in unprocessed human plasma samples. For the electrodeposition of AgNPs and electropolymerization of alginate (Alg) layers on the surface of GCE, cyclic voltammetry (CV) was used in the potential ranges of -2.0 to 2.0 V and -0.6 to 0.2 V, respectively. The electrochemical activity of DOX exhibited two oxidation processes at the optimum pH value of 5.5 on the surface of the modified GCE. The DPV spectra of poly(Alg)/AgNPs modified GCE probe toward consecutive concentrations of DOX in plasma samples demonstrated wide dynamic ranges of 15 ng/mL-0.1 μg/mL and 0.1-5.0 μg/mL, with a low limit of quantification (LLOQ) of 15 ng/mL. The validation results indicated that the fabricated electrochemical probe might serve as a highly sensitive and selective assay for the quantification of DOX in patient samples. As an outstanding feature, the developed probe could detect DOX in unprocessed plasma samples and cell lysates without the requirement for pretreatment.

A ratiometric electrochemical probe for the quantification of apixaban in unprocessed plasma samples using carbon aerogel/BFO modified glassy carbon electrodes

A novel electrochemical probe was established for the quantification of apixaban (APX) in unprocessed plasma samples. Efficiently oxidized graphene oxide aerogels (EEGO-AGs) and nano-sized Bi2Fe4O9 (BFO) particles were electrodeposited on the surface of a glassy carbon electrode (GCE). In this work, a ratiometric electrochemical method was introduced for APX detection to enhance the specificity of the probe in plasma samples. The fabricated ratiometric probe was employed for the indirect detection determination of APX using K3[Fe(CN)6]/K4[Fe(CN)6] as the redox pair. The differential pulse voltammetry technique was used to record the current alteration of the BFO/EEGO-AG-functionalized GCE probe at various APX concentrations. The probe response was proportional to the APX concentrations from 10 ng mL-1 to 10 μg mL-1 with a low limit of quantification (LLOQ) of 10 ng mL-1. After validation, this method was successfully utilized for the determination of APX in patients' plasma samples who have taken APX regularly. The fabricated chemosensor detected APX concentrations in unprocessed plasma samples with high selectivity, resulting from the physical filtering antifouling activity of aerogels.

A dual-emission ratiometric fluorescent biosensor for ultrasensitive detection of glibenclamide using S-CDs/CdS quantum dots

In the present work, sulfide-doped carbon dots (S-CDs)/cadmium sulfide quantum dots (CdS QDs) ratiometric fluorescent nanosensor has been developed for sensitive and selective determination of glibenclamide (GLC) in biological fluids. The method was based on the quenching effect of GLC on the dual-emission intensity of the S-CDs/CdS QDs system at 420 nm and 650 nm, which are related to S-CDs and CdS QDs, respectively. The fluorimetric data analysis indicated that the fluorescence signals of the system were quenched by adding GLC in a concentration-dependent manner. A good linear relationship was observed between GLC concentration and the quenched fluorescence intensity of the S-CDs/CdS QDs in the range of 0.3 nM-10.0 μM. The limit of detection (LOD) value was estimated to be 0.12 nM. Furthermore, under optimum conditions, GLC was detected in spiked human serum sample (as real media) using the developed ratiometric nanosensor with an accuracy of 99.6%. According to the results, the developed dual-emission system can be used as a reliable method for the quantitative detection of GLC in biological samples.

Spectrofluorimetric Method for Monitoring Methotrexate in Patients' Plasma Samples and Cell Lysates Using Highly Fluorescent Carbon Dots

For the first time, nitrogen, sulfur, phosphorus, and boron-doped carbon dots (N, S, P, B-codoped CDs) were synthesized through a hydrothermal reaction. The produced CDs were utilized to develop an optical sensor to determine methotrexate (MTX) in cell lysates and patients' plasma samples. Basically, in the presence of MTX, the fluorescence emission of the CD-based probe was quenched. Under optimum conditions, a good proportional relationship was obtained between the quenched fluorescence signal and MTX concentrations from 74.9 ng/mL to 99.9 µg/mL with a limit of detection of 74.9 ng/mL. The developed nanoprobe provided a wide linear range and high accuracy and was successfully utilized in the routine therapeutic drug monitoring of MTX in plasma samples. The obtained results proposed the developed nanoprobe for the on-time and specific detection of MTX in blood samples. As another application, N, S, P, B-codoped CDs were utilized for bioimaging MCF-7 cancer cells and could be proposed as efficient bioimaging agents for tumor cells.

Simple fluorescence chemosensor for the detection of calcium ions in water samples and its application in bio-imaging of cancer cells

This article describes the design, synthesis and characterization of a sensor suitable for practical measurement of ionized calcium in water samples and cancer cells. Calcium is an important ion in living organs and works as a messenger in several cellular functions. A lack of Ca ions interrupts the immune system and can lead to several diseases. A novel magnetic-polydopamine nanoparticle (PDNP)/rhodamine B (RhB)/folic acid (FA) nanoparticle was developed for the determination of calcium ions in MCF 7 cell lysates and water samples. Furthermore, the produced nanoparticle was employed for bioimaging of folate receptor (FR)-overexpressed cancer cells. This nanoprobe displayed a bright photoluminescence emission at 576 nm under an excitation wavelength of 420 nm. In the presence of calcium ions, the fluorescence emission of the MNPs-PDNPs/RhB/FA probe was proportionally decreased from 20 ng mL-1 to 100 ng mL-1 and 0.5 μg mL-1 to 20 μg mL-1 with a lower limit of quantification (LLOQ) of about 20 ng mL-1. The developed sensor showed a low-interference manner in the presence of possible coexistence interfering ions. In addition, this nanomaterial showed excellent biocompatibility with favorable differentiation ability to attach to the FR-positive cancer cells. The MNPs-PDNPs/RhB/FA nanoparticle has been utilized for bioimaging of the MCF 7 cell with favorable differentiation ability.

Rational design of smart nano-platforms based on antifouling-nanomaterials toward multifunctional bioanalysis

The ability to design nanoprobe devices with the capability of quantitative/qualitative operation in complex media will probably underpin the main upcoming progress in healthcare research and development. However, the biomolecules abundances in real samples can considerably alter the interface performance, where unwanted adsorption/adhesion can block signal response and significantly decrease the specificity of the assay. Herein, this review firstly offers a brief outline of several significances of fabricating high-sensitivity and low-background interfaces to adjust various targets' behaviors induced via bioactive molecules on the surface. Besides, some important strategies to resist non-specific protein adsorption and cell adhesion, followed by imperative categories of antifouling reagents utilized in the construction of high-performance solid sensory interfaces, are discussed. The next section specifically highlights the various nanocomposite probes based on antifouling-nanomaterials for electrode modification containing carbon nanomaterials, noble metal nanoparticles, magnetic nanoparticles, polymer, and silicon-based materials in terms of nanoparticles, rods, or porous materials through optical or chemical strategies. We specially outline those nanoprobes that are capable of identification in complex media or those using new constructions/methods. Finally, the necessity and requirements for future advances in this emerging field are also presented, followed by opportunities and challenges.

Concanavalin A-conjugated gold nanoparticle/silica quantum dot (AuNPs/SiQDs-Con A)-based platform as a fluorescent nanoprobe for the bioimaging of glycan-positive cancer cells

The glycan receptor is a glycosylphosphatidylinositol glycoprotein that is overexpressed on the surface of various cancer cells and has been utilized for wide applications. In the present work, the surface of citrate-capped gold nanoparticles (cit-AuNPs) was modified with mercaptopropionic acid (MPA) molecules to provide carboxylic groups for secondary functionalization with amine anchored-silica quantum dots (Si-NH₂ QDs) to produce cit-AuNPs-MPA/Si-NH₂ QDs fluorescent nanoparticles. Concanavalin A (Con A) molecules were attached through thiol-AuNP bonds to produce the final cit-AuNPs/MPA/Si-NH₂ QDs/Con A smart nanoparticles. The synthesized novel cit-AuNPs/MPA/Si-NH₂ QDs/Con A nanoparticles were utilized for the bioimaging of glycan-overexpressed breast cancer cells. Fluorescence microscopy and flow cytometry results revealed that the cit-AuNPs/MPA/Si-NH₂ QDs/Con A NPs can be efficiently taken up by cancer cells, with differentiating ability between overexpressed cancer cells and low-expressed normal cells. The cellular viability of the cit-AuNPs/MPA/Si-NH₂ QDs/Con A NPs was tested by the MTT test, proving their biocompatible nature at the 200 μg mL^-1 level. In conclusion, the fabricated cit-AuNPs/MPA/Si-NH₂ QDs/Con A NPs could be utilized for the bioimaging of MCF-7 cancer cells even in the clinical setting after proper in vivo validation.

Early stage evaluation of colon cancer using tungsten disulfide quantum dots and bacteriophage nano-biocomposite as an efficient electrochemical platform

Background

Recently, biosensors have become popular analytical tools for small analytes due to their high sensitivity and wide analytical range. In the present work, development of a novel biosensing method based on tungsten disulfide quantum dots (WS2 QDs)-Au for rapidly and selectively detecting c-Met protein is introduced. As a proof of concept, M13 bacteriophage-based biosensors were used for the electrochemical detection of c-Met protein as a colon cancer biomarker.

Method

The M13 bacteriophage (virus), as the biorecognition element, was immobilized on glassy carbon electrodes which were modified by WS2 QDs-functionalized gold nanoparticles. The stepwise presence of the WS2 QDs, gold nanoparticles, and immobilized phage on glassy carbon electrodes were confirmed by scanning electron microscope (SEM) and square wave voltammetry (SWV) technique.

Results

The designed biosensor was applied to measure the amount of c-Met protein in standard solutions, and consequently the desirable detection limit of 1 pg was obtained. Finally, as a proof of concept, the developed platform was used for the evaluation of c-Met protein in serum samples of colon cancer-suffering patients and the results were compared with the results of the common Elisa kit.

Conclusions

As an interesting part of this study, some concentrations of the c-Met protein in colon cancer serum samples which could not be determined by Elisa, were easily analyzed by the developed bioassay system. The developed bioassay system has great potential to application in biomedical laboratories.

Graphical Abstract

Nanotechnology-based approaches for effective detection of tumor markers: A comprehensive state-of-the-art review

As well-appreciated biomarkers, tumor markers have been spotlighted as reliable tools for predicting the behavior of different tumors and helping clinicians ascertain the type of molecular mechanism of tumorigenesis. The sensitivity and specificity of these markers have made them an object of even broader interest for sensitive detection and staging of various cancers. Enzyme-linked immunosorbent assay (ELISA), fluorescence-based, mass-based, and electrochemical-based detections are current techniques for sensing tumor markers. Although some of these techniques provide good selectivity, certain obstacles, including a low sample concentration or difficulty carrying out the measurement, limit their application. With the advent of nanotechnology, many studies have been carried out to synthesize and employ nanomaterials (NMs) in sensing techniques to determine these tumor markers at low concentrations. The fabrication, sensitivity, design, and multiplexing of sensing techniques have been uplifted due to the attractive features of NMs. Various NMs, such as magnetic and metal nanoparticles, up-conversion NPs, carbon nanotubes (CNTs), carbon-based NMs, quantum dots (QDs), and graphene-based nanosensors, hyperbranched polymers, optical nanosensors, piezoelectric biosensors, paper-based biosensors, microfluidic-based lab-on-chip sensors, and hybrid NMs have proven effective in detecting tumor markers with great sensitivity and selectivity. This review summarizes various categories of NMs for detecting these valuable markers, such as prostate-specific antigen (PSA), human carcinoembryonic antigen (CEA), alpha-fetoprotein (AFP), human chorionic gonadotropin (hCG), human epidermal growth factor receptor-2 (HER2), cancer antigen 125 (CA125), cancer antigen 15-3 (CA15-3, MUC1), and cancer antigen 19-9 (CA19-9), and highlights recent nanotechnology-based advancements in detection of these prognostic biomarkers.

Applications of advanced materials in bio-sensing in live cells: Methods and applications

A wide variety of species, such as different ions, reactive oxygen species, and biomolecules play critical roles in many cell functions. These species are responsible for a range of cellular functions such as signaling, and disturbed levels could be involved in many diseases, such as diabetes, cancer, neurodegeneration etc. Thus, sensitive and specific detection methods for these biomarkers could be helpful for early disease detection and mechanistic investigations. New ultrasensitive sensors for detection of markers within living cells are a growing field of research. The present review provides updates in live cell-based biosensing, which have been published within the last decade. These sensors are mainly based on carbon, gold and other metals, and their physicochemical advantages and limitations are discussed. Advanced materials can be incorporated into probes for the detection of various analytes in living cells. The sensitivity is strongly influenced by the intrinsic properties of the nanomaterials as well their shape and size. The mechanisms of action and future challenges in the developments of new methods for live cell based biosensing are discussed.

Differentiation and targeting of HT 29 cancer cells based on folate bioreceptor using cysteamine functionalized gold nano-leaf

Cancer is one of the main causes of death worldwide. To decrease the mortality of cancer, early stage detection of cancer is of great importance. An innovative platform was developed for differentiation and detection of HT 29 cancer cells based on interactions between folate (FA) and folate receptors (FRs) of the membrane of cancer cells. In summary, FA and cysteamine (CA)-functionalized gold nanoparticles (AuNPs) were synthesized and characterized by field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), dynamic light scattering (DLS) and Fourier-transform infrared (IR) spectroscopy. Also, the surface charge was determined by measuring of the zeta potential. Fluorescence imaging and flow cytometry analyses were used to approve the selective uptake of the synthesized probe to the cancer cells. HEK 293 FR-negative cells were applied to assess the selectivity of AuNPs/CA/FA towards FR-negative cells. The differential pulse voltammetry (DPV) technique was used to determine the HT 29 cells from 250 to 5000 cells/mL with a lower limit of quantification (LLOQ) of 250 cells/mL. The produced AuNPs/CA/FA based nanoprobe could not only detect the signaling of HT 29 cells but also improve the specificity of cytosensor towards FR-positive cancer cells. According to the obtained results, the newly developed nano-probe could be used as a portable biomedical device for cancer diagnosis.

Bioassays: The best alternative for conventional methods in detection of Legionella pneumophila

Fastidious bacteria are group of bacteria that not only grow slowly but also have complex nutritional needs. In this review, recent progress made on development of biosensing strategies towards quantification of Legionella pneumophila as fastidious bacteria in microbiology was investigated. In coincidence with medical bacteriology, it is the most widely used bio-monitoring, biosensors based on DNA and antibody. Also, all of legionella pneumophila genosensors and immunosensors that developed in recent years were collected analyzed. This review is meant to provide an overview of the various types of bioassays have been developed for determination of Legionella Legionella, along with significant advances over the last several years in related technologies. In addition, this review described: i) Most frequently applied principles in bioassay/biosensing of Legionellaii) The aspects of fabrication in the perspective of bioassay/biosensing applications iii) The potential of various electrochemical and optical bioassay/biosensing for the determination of Legionella and the circumvention of the most serious problem in immunosensing/immunoassay was discussed. iv) Some of bioassay/biosensing has been discussed with and without labels. v) We also summarize the latest developments in the applications of bioassay/biosensing methods for detection of Legionella. vi) The development trends of optical and electrochemical based bioassay/biosensing are also introduced.

Bioassay of saliva proteins: The best alternative for conventional methods in non-invasive diagnosis of cancer

Non-invasive diagnosis of cancer is often the key to effective treatment and patient survival. Saliva as a multi-constituent oral fluid comprises various disease signaling biomarkers, holds great potential for early-stage cancer diagnostics with cost-effective and easy collection, storage, transport and processing. Therefore, detection of biomarkers and proteins in the saliva samples is highly demand. The current review was performed using reliable internet database (mainly PubMed) to provide an overview of the most recent developments on non-invasive diagnosis of cancers in saliva and highlights main challenges and future prospects in sensing of the salivary biomarkers. The conventional detection methods of cancer biomarkers in saliva is discussed in the paper, however, the main focus is on non-invasive diagnosis of cancers in saliva using immunosensing (electrochemical, optical, piezoelectric), DNA based sensors, aptasensors and peptide based bio-assays The reviewed literature revealed that non-invasive cancer detection methods using the mentioned biosensors and without any processing of saliva sample offers a quick, sensitive, specific and cost effective analytical tool. Besides, salivary based detection methods can be used for simultaneous detection of panels of disease specific biomarkers in a real time manner or as home testing kits in near future.

S-Layer Protein-Based Biosensors

The present paper highlights the application of bacterial surface (S-) layer proteins as versatile components for the fabrication of biosensors. One technologically relevant feature of S-layer proteins is their ability to self-assemble on many surfaces and interfaces to form a crystalline two-dimensional (2D) protein lattice. The S-layer lattice on the surface of a biosensor becomes part of the interface architecture linking the bioreceptor to the transducer interface, which may cause signal amplification. The S-layer lattice as ultrathin, highly porous structure with functional groups in a well-defined special distribution and orientation and an overall anti-fouling characteristics can significantly raise the limit in terms of variety and the ease of bioreceptor immobilization, compactness of bioreceptor molecule arrangement, sensitivity, specificity, and detection limit for many types of biosensors. The present paper discusses and summarizes examples for the successful implementation of S-layer lattices on biosensor surfaces in order to give a comprehensive overview on the application potential of these bioinspired S-layer protein-based biosensors.

A regenerable sorbent composed of a zeolite imidazolate framework (ZIF-8), Fe3O4 and graphene oxide for enrichment of atorvastatin and simvastatin prior to their determination by HPLC

Graphene oxide (GO), nanosized Fe₃O₄ and zeolite imidazolate framework-8 (ZIF-8) were hybridized as a multifunctional sorbent for use in microextraction. The sorbent was characterized by SEM, TEM, XRD and FTIR. The composite is porous, has a high specific surface (> 600 m²·g^-1) and is paramagnetic. The GO sheets are shown to act as carriers for the Fe₃O₄ nanoparticles and ZIF-8. The composite is a viable material for the preconcentration of atorvastatin and simvastatin from urine prior to their determination by HPLC with PDA detection. The limits of detection are 116 and 387 pg·mL^-1, respectively. Recoveries from spiked urine samples range between 84.7 and 95.7%, with relative standard deviation of ≤4.5%. Enrichment factors range from 169 to 191. The method was successfully applied to the determination of atorvastatin in urine. Moreover, this sorbent is regenerable and recyclable for at least seven times without obvious decrease in performance. Graphical abstract A composite sorbent composed of a zeolite imidazolate framework, Fe₃O₄ and graphene oxide was applied to the extraction of statins in urine prior their determination by HPLC.