Sonocatalytic and sonophotocatalytic degradation of Rhodamine 6G containing wastewaters

Ultrasonic treatment of dye chemicals in wastewater: A review

The existence of pollutants, such as toxic organic dye chemicals, in water and wastewater raises concerns as they are inadequately eliminated through conventional water and wastewater treatment methods, including physicochemical and biological processes. Ultrasonic treatment has emerged as an advanced treatment process that has been widely applied to the decomposition of recalcitrant organic contaminants. Ultrasonic treatment has several advantages, including easy operation, sustainability, non-secondary pollutant production, and saving energy. This review examines the elimination of dye chemicals and categorizes them into cationic and anionic dyes based on the existing literature. The objectives include (i) analyzing the primary factors (water quality and ultrasonic conditions) that influence the sonodegradation of dye chemicals and their byproducts during ultrasonication, (ii) assessing the impact of the different sonocatalysts and combined systems (with ozone and ultraviolet) on sonodegradation, and (iii) exploring the characteristics-based removal mechanisms of dyes. In addition, this review proposes areas for future research on ultrasonic treatment of dye chemicals in water and wastewater.

Advances in ultrasound-assisted synthesis of photocatalysts and sonophotocatalytic processes: A review

Water pollution and the global energy crisis are two significant challenges that the world is facing today. Ultrasound-assisted synthesis offers a simple, versatile, and green synthetic tool for nanostructured materials that are often unavailable by traditional synthesis. Furthermore, the integration of ultrasound and photocatalysis has recently received considerable interest due to its potential for environmental remediation as a low-cost, efficient, and environmentally friendly technique. The underlying principles and mechanisms of sonophotocatalysis, including enhanced mass transfer, improved catalyst-pollutant interaction, and reactive species production have been discussed. Various organic pollutants as dyes, pharmaceuticals, pesticides, and emerging organic pollutants are targeted based on their improved sonophotocatalytic degradation efficiency. Additionally, the important factors affecting sonophotocatalytic processes and the advantages and challenges associated with these processes are discussed. Overall, this review provides a comprehensive understanding of sono-assisted synthesis and photocatalytic degradation of organic pollutants and prospects for progress in this field.

Recent progress on sonochemical production for the synthesis of efficient photocatalysts and the impact of reactor design

Sonochemical-assisted synthesis has flourished recently for the design of photocatalysts. The main power used is ultrasound that allows the nanomaterials shape and size modification and control. This review highlights the effect in formation mechanism by ultrasound application and the most common photocatalysts that were prepared via sonochemical techniques. Moreover, the challenge for the suitable reactor design for the synthesis of materials or for their photocatalytic evaluation is discussed since the most prominent reactor systems, batch, and continuous flow, has both advantages and drawbacks. This work summarises the significance of sonochemical synthesis for photocatalytic materials as a green technology that needs to be further investigated for the preparation of new materials and the scale up of developed reactor systems to meet industrial needs.

Process intensification approaches in wastewater and sludge treatment for the removal of pollutants

Process Intensification (PI) is the modification or integration of conventional or novel processes within a single unit operation in order to improve product quality and reduce waste. PI offers numerous advantages, including a reduction in the initial and operational costs, an improvement in product quality/quantity, the generation of less waste, and an increase in process safety. The synergistic effect of PI in comparison to the conventional procedure ensures maximizing resource efficiency. PI can be accomplished in two ways: either by integrating various processes or by modifying the design of equipment to improve operational efficiency. In this regard, the present review provides a comprehensive insight into the application of PI in wastewater and sludge treatment methods and discusses the operational advantages. This review provides a comprehensive list of different PI approaches applied in wastewater and sludge treatment to remove pollutants and the various equipment, techniques and reactors used in PI. The second section addresses the challenges of PI in wastewater treatment that removes dyes, pesticides, organic and inorganic pollutants, micro- and nano-plastics, persistent organic pollutants, pharmaceutical and personal care pollutants.

Sonolytic degradation kinetics and mechanisms of antibiotics in water and cow milk

Antibiotics (ABX) residues frequently occurred in water and cow milk. This work aims to understand the kinetics and mechanisms of sonolytic degradation of four ABX, i.e. ceftiofur hydrochloride (CEF), sulfamonomethoxine sodium (SMM), marbofloxacin (MAR), and oxytetracycline (OTC) in water and milk. In both water and milk, the sonolytic degradation of ABX follows pseudo-first order (PFO) kinetics well (R2: 0.951-0.999), with significantly faster ABX degradation in water (PFO kinetics constants (k1): 1.5 × 10-3-1.2 × 10-1 min-1) than in milk (k1: 3.5 × 10-4-5.6 × 10-2 min-1). The k1 values for SMM degradation in water increased by 118% with ultrasonic frequency (40-120 kHz), 174% with ultrasonic frequency (80-500 kHz), 649% with ultrasonic power (73-259 W), 22% with bulk temperature (12-40℃), and by 68% with reaction volume (50-250 mL), respectively, in other things being equal. The relevant k1 values in milk increased by 326%, 231%, 122%, 10% as well as 82% with the above same effective factors, respectively. The oxidation by free radicals generated in situ dominates ABX degradation, and the hydrophobic CEF (54.0-971.7 nM min-1) and SMM (39.2-798.4 nM min-1) underwent faster degradation than the hydrophilic MAR (33.9-751.9 nM min-1) and OTC (33.8-545.3 nM min-1) in both water and milk. Adding an extra 0.5 mM H2O2 accelerated SMM degradation by 19% in water and 33% in milk. After 130-150 min sonication of 100 mL of 2.0 mg L-1 (6.62 μM) SMM in various milk with 500 kHz and 259 W, the residue concentrations (52.9-96.3 μg L-1) can meet the relevant maximum residue limit (100 μg L-1).

Ultrasound-assisted degradation of organophosphorus pesticide methidathion using CuFe2O4@SiO2-GOCOOH as a magnetic separable sonocatalyst

Water contamination by pesticides is a critical environmental issue, necessitating the development of sustainable and efficient degradation methods. This study focuses on synthesizing and evaluating a novel heterogeneous sonocatalyst for degrading pesticide methidathion. The catalyst consists of graphene oxide (GO) decorated CuFe₂O₄@SiO₂ nanocomposites. Comprehensive characterization using various techniques confirmed the superior sonocatalytic activity of the CuFe₂O₄@SiO₂-GOCOOH nanocomposite compared to CuFe₂O₄@SiO₂ alone. The enhanced performance is attributed to the combined effects of GO and CuFe₂O₄@SiO₂, including increased surface area, enhanced adsorption capabilities, and efficient electron transfer pathways. Reaction parameters such as time, temperature, concentration, and pH significantly influenced the degradation efficiency of methidathion. Longer reaction times, higher temperatures, and lower initial pesticide concentrations favored faster degradation and higher efficiency. Optimal pH conditions were identified to ensure effective degradation. Remarkably, the catalyst demonstrated excellent recyclability, indicating its potential for practical implementation in pesticide-contaminated wastewater treatment. This research contributes to the development of sustainable methods for environmental remediation, highlighting the promising potential of the graphene oxide decorated CuFe₂O₄@SiO₂ nanocomposite as an effective heterogeneous sonocatalyst for pesticide degradation.

Sonochemical synthesis of Ce-TiO2 nanocatalyst and subsequent application for treatment of real textile industry effluent

Treatment of real textile industry effluent using photocatalysis, sonocatalysis, sonophotocatalysis and H₂O₂ assisted sonophotocatalysis have been studied based on the use of Ce-TiO₂ nanocatalyst synthesized using sonochemical co-precipitation method. Characterization studies of the obtained catalyst revealed crystallite size as 1.44 nm with particles having spherical morphology. A shift of the absorption edge to the visible light range was also observed in UV-Vis diffuse reflectance spectra (UV-DRS) analysis. The effects of different operational parameters viz catalyst dose (0.5 g/L-2 g/L), temperature (30 °C-55 °C) and pH (3-12) on the COD reduction were studied. The reduction in the COD was higher at lower pH and the optimum temperature established was 45 °C. It was also elucidated that the required catalyst dose was lesser in combined sonophotocatalysis when compared with individual photocatalysis and sonocatalysis. Combination of processes and addition of oxidants increased the COD reduction with the sonophotocatalytic oxidation combined with H₂O₂ treatment showing the best results for COD reduction (84.75%). The highest reduction in COD for photocatalysis was only 45.09% and for sonocatalysis, it was marginally higher at 58.62%. The highest reduction in COD achieved by sonophotocatalysis was 64.41%. Toxicity tests coupled with Liquid Chromatography Mass Spectrometry (LC-MS) analysis revealed that there were no additional toxic intermediates added to the system during the treatment. Kinetic study allowed establishing that generalized kinetic model fits the experimental results well. Overall, the combined advanced oxidation processes showed better results than the individual processes with higher COD reduction and lower requirement of the catalyst.

Degradation of magenta dye using cavitation-based transducers to glass marble: Lab to semi-pilot scale operations

In the present work, the degradation of magenta dye has been investigated using ultrasonic (US) and ultraviolet (UV) irradiation at a laboratory scale. Additionally, the investigation was conducted at a semi-pilot scale by employing hydrodynamic cavitation and a novel air-marble cavitation reactor. Initially, optimization studies such as the effect of initial dye concentration and catalyst loading of TiO₂ and MnO₂ followed by the effect of combined catalyst loading (TiO₂ /MnO₂ ) on the extent of degradation have been studied at a capacity of 3 L. It was observed that the US irradiation results in 87.1% and 68.2% of degradation, whereas the UV irradiation results in 79.8% and 56.4% extent of degradation at 1 g/l of TiO₂ and 0.8 g/l of MnO₂ , respectively. The maximum degradation was 92.1% at the combined loading of 0.6 g/l (1:0.8; TiO₂ :MnO₂ ) using US irradiation with a capacity of 3 L and 81.3% using a hydrodynamic cavitation reactor with a semi-pilot scale capacity of 7 L. The chemical oxygen demand (COD) analysis also showed the highest COD removal of 92% at a small scale using the US irradiation and 76% at a semi-pilot scale using hydrodynamic cavitation. On a small scale, the cost of a US/TiO₂  + MnO₂ treatment scheme is US$ 0.01/L, whereas on a semi-pilot scale using HC/TiO₂  + MnO₂ , the cost is US$ 0.04/L. Both of these treatment schemes offer viable pathways for degradation based on energy and economic assessments. Overall, the current work has clearly demonstrated the effectiveness of the cavitational reactor for the efficient degradation of magenta dye from lab to semi-pilot scale operation. PRACTITIONER POINTS: Small-scale dye containing wastewater treatment using ultrasound and ultraviolet irradiation Combined use of catalysts at large-scale operations with novel cavitation techniques Novel cavitation techniques studied for dye degradation. Energy efficiency and cost analysis evaluated for AOPs studies.

Sonophotocatalytic degradation of malachite green in aqueous solution using six competitive metal oxides as a benchmark

A comparison study examines six different metal oxides (CuO, ZnO, Fe3O4, Co3O4, NiO, and α-MnO2) for the degradation of malachite green dye using four distinct processes. These processes are as follows: sonocatalysis (US/metal oxide), sonocatalysis under ultra-violet irradiation (US/metal oxide/UV), sonocatalysis in the presence of hydrogen peroxide (US/metal oxide/H2O2), and a combination of all these processes (US/metal oxide/UV/H2O2). The effective operating parameters, such as the dosage of metal oxide nanoparticles (MONPs), the type of the process, and the metal oxides’ efficiency order, were studied. At the same reaction conditions, the sonophotocatalytic is the best process for all six MOsNPs, CuO was the better metal oxide than other MOsNPs, and at the sonocatalysis process, ZnO was the best metal oxide in other processes. It was found that the metal oxide order for sonocatalytic process is CuO > α-MnO2 ≥ ZnO > NiO ≥ Fe3O4 ≥ Co3O4 within 15–45 min. The order of (US/metal oxide/UV) process is ZnO ≥ NiO ≥ α-MnO2 > Fe3O4 ≥ CuO ≥ Co3O4 within 5–40 min. The order of (US/ MOsNPs/ H2O2) process is ZnO ≥ CuO ≥ α-MnO2 ≥ NiO > Co3O4 > Fe3O4 within 5–20 min. The maximum removal efficiency order of the sonophotocatalytic process is ZnO ≥ CuO > α-MnO2 > NiO > Fe3O4 ≥ Co3O4 within 2–8 min. The four processes degradation efficiency was in the order US/MOsNPs ˂ US/MOsNPs/UV ˂ US/MOsNPs/H2O2 ˂ (UV/Ultrasonic/MOsNPs/H2O2). Complete degradation of MG was obtained at 0.05 g/L MONPs and 1 mM of H2O2 using 296 W/L ultrasonic power and 15 W ultra-violet lamp (UV-C) within a reaction time of 8 min according to the MOsNPs type at the same sonophotocatalytic/H2O2 reaction conditions. The US/metal oxide/UV/H2O2 process is inexpensive, highly reusable, and efficient for degrading dyes in colored wastewater.

Graphical abstract

Medium-high frequency sonication dominates spherical-SiO2 nanoparticle size

Spherical SiO₂ nanoparticles (SSNs) have been inventively synthesized using the Stöber method with sonication at medium-high frequencies (80, 120, and 500 kHz), aiming to control SSN size and shorten reaction time. Compared to the conventional method, such sonication allowed the Stöber reaction complete in 20-60 min with a low molar ratio of NH₄OH/tetraethyl orthosilicate (0.84). The hydrodynamic diameters of 63-117 nm of SSNs were obtained under sonication with 80, 120, and 500 kHz of ultrasonic frequencies. Moreover, the SSNs obtained were smaller at 120 kHz than at 80 kHz in a multi-frequencies ultrasonic reactor, and the SSN size decreased with increasing ultrasonic power at 20 °C, designating the sonochemical unique character, namely, the SSN-size control is associated with the number of microbubbles originated by sonication. With another 500 kHz ultrasonic bath, the optimal system temperature for producing smaller SSNs was proven to be 20 °C. Also, the SSN size decreased with increasing ultrasonic power. The smallest SSNs (63 nm, hydrodynamic diameter by QELS, or 21 nm by FESEM) were obtained by sonication at 207 W for 20 min at 20 °C. Furthermore, the SSN size increased slightly with increasing sonication time and volume, favoring the scale-up of SSNs preparation. The mechanisms of controlling the SSN size were further discussed by the radical's role and effects of ammonia and ethanol concentration.

Aqueous Acetamiprid Degradation Using Combined Ultrasonication and Photocatalysis Under Visible Light

Acetamiprid (ACE), a neonicotinoid pesticide widely used in pest control, was found in high concentrations in soils, rivers, and lakes. In the present study, ACE degradation was investigated using visible light driven photocatalysis over nitrogen-graphene oxide (N-GO) and palladium-graphene oxide (Pd-GO)-doped ZnO photocatalysts combined with ultrasonication implemented either as a pretreatment (sonolysis) or operated simultaneously with photocatalysis (sonophocatalysis). The effectiveness of the two ACE degradation processes was determined separately. The sonolysis pretreatment allowed reaching almost 40% acetamiprid conversion within 30 min of reaction. Pursuing with the photodegradation reaction in the presence of N-GO-ZnO and Pd-GO-ZnO resulted in a maximum conversion of 98% of ACE within 5 h. As for the sonophotocatalysis process, the reaction time was shortened from 5 to 2 h with 100% acetamiprid conversion. In addition, the photocatalysts were shown to keep their activity even after 5 sonophotocatalytic cycles, thus proving their reusability.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s11270-022-05867-4.

Knowledge extraction of sonophotocatalytic treatment for acid blue 113 dye removal by artificial neural networks

Removing decolorizing acid blue 113 (AB113) dye from textile wastewater is challenging due to its high stability and resistance to removal. In this study, we used an artificial neural network (ANN) model to estimate the effect of five different variables on AB113 dye removal in the sonophotocatalytic process. The five variables considered were reaction time (5-25 min), pH (3-11), ZnO dosage (0.2-1.0 g/L), ultrasonic power (100-300 W/L), and persulphate dosage (0.2-3 mmol/L). The most effective model had a 5-7-1 architecture, with an average deviation of 0.44 and R² of 0.99. A sensitivity analysis was used to analyze the impact of different process variables on removal efficiency and to identify the most effective variable settings for maximum dye removal. Then, an imaginary sonophotocatalytic system was created to measure the quantitative impact of other process parameters on AB113 dye removal. The optimum process parameters for maximum AB 113 removal were identified as 6.2 pH, 25 min reaction time, 300 W/L ultrasonic power, 1.0 g/L ZnO dosage, and 2.54 mmol/L persulfate dosage. The model created was able to identify trends in dye removal and can contribute to future experiments.

Cavitation based treatment of industrial wastewater: A critical review focusing on mechanisms, design aspects, operating conditions and application to real effluents

Acoustic cavitation (AC) and hydrodynamic cavitation (HC) coupled with advanced oxidation processes (AOPs) are prominent techniques used for industrial wastewater treatment though most studies have focused on simulated effluents. The present review mainly focuses on the analysis of studies related to real industrial effluent treatment using acoustic and hydrodynamic cavitation operated individually and coupled with H₂O₂, ozone, ultraviolet, Fenton, persulfate and peroxymonosulfate, and other emerging AOPs. The necessity of using optimum loadings of oxidants in the various AOPs for obtaining maximum COD reduction of industrial effluent have been demonstrated. The review also presents critical analysis of designs of various HCRs that have been or can be used for the treatment of industrial effluents. The impact of operating conditions such as dilution, inlet pressure, ultrasonic power, pH, and operating temperature have been also discussed. The economic aspects of the industrial effluent treatment have been analyzed. HC can be considered as cost-efficient approach compared to AC on the basis of the lower operating costs and better transfer efficiencies. Overall, HC combined with AOPs appears to be an effective treatment strategy that can be successfully implemented at industrial-scale of operation.

Recent Progress and Prospects in Catalytic Water Treatment

Presently, conventional technologies in water treatment are not efficient enough to completely mineralize refractory water contaminants. In this context, the implementation of catalytic processes could be an alternative. Despite the advantages provided in terms of kinetics of transformation, selectivity, and energy saving, numerous attempts have not yet led to implementation at an industrial scale. This review examines investigations at different scales for which controversies and limitations must be solved to bridge the gap between fundamentals and practical developments. Particular attention has been paid to the development of solar-driven catalytic technologies and some other emerging processes, such as microwave assisted catalysis, plasma-catalytic processes, or biocatalytic remediation, taking into account their specific advantages and the drawbacks. Challenges for which a better understanding related to the complexity of the systems and the coexistence of various solid-liquid-gas interfaces have been identified.

Ultrasound for the remediation of contaminated waters with persistent organic pollutants: A short review

The rising amount of persistent organic contaminants released into water reservoirs in the last years became a cause of concern for the industry, academy, and public administration, due to their bioaccumulation, mutagenicity, and photosynthesis reduction. Therefore, the search for processes that efficiently remove such contaminants became of primary importance. In this context, ultrasound (US) is one of the most promising and economically viable alternatives to degrade organic pollutants in varied environments. Whereas the use of other advanced oxidation processes (AOPs), such as Fenton and photocatalysis, has been widely reported for this purpose, only a few papers deal with ultrasound application as a possible AOP. In this review, a general overview of ultrasound is provided, covering the last twenty years. It includes fundamental aspects of ultrasound and applications, individually or combined with other AOPs, to deplete organic pollutants from various classes in an aqueous environment. Finally, the review concludes by indicating that additional research should be conducted worldwide to explore the full potential of ultrasound as a useful AOP.

Application of advanced materials in sonophotocatalytic processes for the remediation of environmental pollutants

Significant advances in various industrial processes have resulted in the discharge of toxic pollutants into the environment. Consequently, it is essential to develop efficient wastewater treatment processes to reduce water contamination and increase recycling/reuse. Photocatalytic degradation is considered as an efficient method for the degradation of toxic pollutants in industrial wastewater. However, the use of photocatalytic approaches is associated with numerous limitations, such as lengthy procedures and the necessity for large amounts of catalysts. Hence, it has been proposed that photocatalysis could be combined with other techniques, including sonolysis, electrochemical, photothermal, microwave, ultrafiltration, and biological reactor. The integration of photocatalysis with sonolysis could be remarkably beneficial for environmental remediation. The combination of these processes has the advantages of using uniformly dispersed catalysts, regeneration of the catalyst surface, improved mass transfer, enhanced surface area due to smaller catalyst particles, and production of more active radicals for the degradation of organic pollutants. In this review, an overview on employing sonophotocatalysis for the removal of toxic organic contaminants from aqueous environments is provided. Additionally, the limitations of photocatalysis alone and the fundamental sonophotocatalytic mechanistic pathways are discussed. The importance of utilizing advanced two-dimensional (2D) semiconductor materials in sonophotocatalysis and the common synthetic approaches for the preparation of 2D materials are also highlighted. Lastly, the review provides comprehensive insights into different materials based on metal oxides, chalcogenides, graphene, and metal organic frameworks (MOFs), which are involved in sonophotocatalytic processes employed for the remediation of environmental pollutants.

Degradation of nitrogen-containing hazardous compounds using advanced oxidation processes: A review on aliphatic and aromatic amines, dyes, and pesticides

Nitrogen-containing amino and azo compounds are widely used in textile, agricultural and chemical industries. Most of these compounds have been demonstrated to be resistant to conventional degradation processes. Advanced oxidation processes can be effective to mineralize nitrogen-containing compounds and improve the efficacy of overall treatment schemes. Due to a global concern for the occurrence of toxic and hazardous amino-compounds and their harmful degradation products in water, it is important to develop technologies that focus on all the aspects of their degradation. Our focus is to present a state-of-the-art review on the degradation of several amine- and azo-based compounds using advanced oxidation processes. The categories reviewed are aromatic amines, aliphatic amines, N-containing dyes and N-containing pesticides. Data has been compiled for degradation efficiencies of each process, reaction mechanisms focusing on specific attack of oxidants on N atoms, the effect of process parameters like pH, initial concentration, time of treatment, etc. and identification of intermediates. Several AOPs have been compared to provide a systematic overview of available literature that will drive essential aspects of future research on amine-based compounds. Ozone is observed to be highly reactive to most amines, dyes and pesticides, followed by Fenton processes. Degradation of amines is highly sensitive to pH and mechanisms differ at different pH values. Cavitation is a promising alternative pre-treatment method for cost reduction. Hybrid methods under optimized conditions are demonstrated to give synergistic effects and must be tailored for specific effluents in question. In conclusion, even though nitrogen-containing compounds are recalcitrant in nature, the use of advanced oxidation processes at carefully established optimum conditions can yield highly efficient degradation of the compounds.

A Review on Sonochemistry and Its Environmental Applications

Sonochemistry is a significant contributor to green science as it includes: (i) the use of less toxic compounds and environmentally safe solvents, (ii) improvement of reaction conditions and selectivity, (iii) no toxic sludge generation, (iv) reduction in the energy use for chemical transformations, (v) reusability of materials. In water and wastewater treatment, ultrasound is used as an advanced oxidation process to eliminate refractory pollutants. Ultrasound is also used as a very effective sludge pretreatment technology in wastewater treatment plants to facilitate biogas production. Moreover, sonochemical synthesis of nanoparticles has recently attracted great attention as a greener protocol. This paper presents the main applications of ultrasound in environmental remediation and protection. The study also introduces mechanism for the degradation of pollutants from water via sonication in aqueous media and the principle factors affecting the cavitational effect.

Photocatalysis, photoinduced enhanced anti-bacterial functions and development of a selective m-tolyl hydrazine sensor based on mixed Ag·NiMn2O4 nanomaterials

In this work, a tri-metal based nanocomposite was synthesized and characterized. A detailed investigation of the photocatalytic dye degradation efficiency of the nanocomposite under visible light showed promising results in a wide pH range, both acidic and basic medium. Studies on anti-bacterial activity against seven pathogenic bacteria, including both Gram positive and Gram negative species, were conducted in the presence and absence of light and compared with the standard antibiotic gentamicin. The minimum inhibitory concentration (MIC) values of Ag·NiMn₂O₄ against multidrug-resistant (MDR) pathogens ranged from 0.008 to 0.65 μg μL^-1, while the minimum bactericidal concentration (MBC) was found to be 0.0016 μg μL^-1. The nanomaterial, Ag·NiMn₂O₄ was deposited onto the surface of a glassy carbon electrode (GCE; 0.0316 cm²) as a thin film to fabricate the chemical sensor probe. The proposed sensor showed linear current (vs. concentration) response to m-THyd (m-tolyl hydrazine) from 1.0 pM to 0.01 mM, which is denoted as the linear dynamic range (LDR). The estimated sensitivity and detection limit of the m-THyd sensor were found to be 47.275 μA μM^-1 cm^-2 and 0.97 ± 0.05 pM, respectively. As a potential sensor, it is reliable due to its good reproducibility, rapid response, higher sensitivity, working stability for long duration and efficiency in the analysis of real environmental samples.

Synergistic Effect of Microwave Calcination and Sonophotocatalytic Activity of TiO2-Montmorillonite on The Degradation of Direct Yellow 106 and Disperse Violet 1

The TiO2-pillared montmorillonite nanoparticles (TiO2-Mt) were prepared by the sol-gel method, then applied for the elimination of dyes in solution: CI Direct Yellow 106 (DY106) (azo dye) and CI Disperse Violet 1 (DV1) (anthraquinone dye) by the sonocatalytic, photocatalytic and sonophotocatalytic processes, in order to test the efficiency of photocatalysts, while photolysis, sonolysis, and sonophotolysis tests have been done previously. The photocatalysts (TiO2-Mt) were characterized by X-ray Diffraction (XRD), X-ray Fluorescence analysis (XRF), Brunauer-Emmet-Teller (BET), Scanning Electron Microscopy (SEM) methods, thermal and thermogravimetric analysis (TG/DTA) and the zero load point (pHpzc). Aqueous solutions of dye of an initial concentration (50 mg/L), in the presence of 1 g/L of photocatalyst, were irradiated using a mercury lamp (Hg) of 40 Mw/cm2 and put in contact with an ultrasonic probe with a frequency of 20 kHz and a power of 750 W, providing the ultrasound. The results obtained indicate that a weak, good and better dye degradation rate has been observed successively by the application of the sonocatalytic, photocatalytic and sonophotocatalytic processes, where the latter has shown a synergistic effect, while the photocatalyst TiO2-Mt/MW showed significant efficiency during the degradation, due to the beneficial effect of the microwave calcination mode. Copyright © 2020 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

Photocatalytic Degradation of Aqueous Rhodamine 6G Using Supported TiO2 Catalysts. A Model for the Removal of Organic Contaminants From Aqueous Samples

As a model for the removal of complex organic contaminants from industrial water effluents, the heterogeneous photocatalytic degradation of Rhodamin 6G was studied using TiO₂-derived catalysts, incorporated in water as suspension as well as supported in raschig rings. UV and Visible light were tested for the photo-degradation process. TiO₂ catalysts were synthesized following acid synthesis methodology and compared against commercial TiO₂ catalyst samples (Degussa P25 and Anatase). The bandgap (E_g) of the TiO₂ catalysts was determined, were values of 2.97 and 2.98 eV were obtained for the material obtained using acid and basic conditions, respectively, and 3.02 eV for Degussa P25 and 3.18 eV for anatase commercial TiO₂ samples. Raschig rings-supported TiO₂ catalysts display a good photocatalytic performance when compared to equivalent amounts of TiO₂ in aqueous suspension, even though a large surface area of TiO₂ material is lost upon support. This is particularly evident by taking into account that the characteristics (XRD, RD, Eg) and observed photodegradative performance of the synthesized catalysts are in good agreement with the commercial TiO₂ samples, and that the RH6G photodegradation differences observed with the light sources considered are minimal in the presence of TiO₂ catalysts. The presence of additives induce changes in the kinetics and efficiency of the TiO₂-catalyzed photodegradation of Rh6G, particularly when white light is used in the process, pointing toward a complex phenomenon, however the stability of the supported photocatalytic systems is acceptable in the presence of the studied additives. In line with this, the magnitude of the chemical oxygen demand, indicates that, besides the different complex photophysical processes taking place, the endproducts of the considered photocatalytic systems appears to be similar.

Improvements in Catalyst Synthesis and Photocatalytic Oxidation Processing Based on the Use of Ultrasound

The efficacy of photocatalysis strongly depends on the activity of the catalysts and the operational factors, especially factors associated with mass transfer and the possibility of catalyst deactivation. The use of ultrasound has great potential to enhance catalyst activity, during both the synthesis and actual oxidation processes due to the cavitational effects of turbulence and liquid streaming. This article presents an overview of the application aspects of ultrasound, both in the synthesis of the photocatalyst and applications for wastewater treatment. A review of the literature revealed that the use of ultrasound in the synthesis processes can result in a catalyst with a lower mean size and higher surface area as well as uniform size distribution. The application of ultrasound in the actual photocatalytic oxidation facilitates enhancement of the oxidation capacity, leading to higher degradation rates, sometimes synergistic results and definitely lower treatment times. This article also presents guidelines for the selection of the best operating conditions for the use of ultrasound in photocatalytic systems and includes a discussion on the possible reactor configurations suitable for large-scale operations. Overall, a combination of ultrasound with photocatalytic oxidation or the optimized application of ultrasound in catalyst synthesis can yield significant benefits.

Optimization of methylparaben degradation by sonocatalysis

Sonocatalytic degradation of methylparaben (MPB) in the presence of a low-cost clay mineral (sepiolite) was optimized using a multivariable center composite design protocol based on response surface methodology (RSM). Using the data generated with varying MPB concentrations, pH, frequency and catalyst dose, two semi-empirical expressions were developed to describe the relation between the apparent reaction rate constant of the parent compound and the most significant control variables. It was found that ultrasonic power, pH, sepiolite dose and its interactions with time and pH were the most significant parameters influencing the rate of MPB decay under high frequency ultrasound. The models also showed that the rate constant was a convex function of time, as it decreased during the first 35-min of sonolysis and increased thereafter, indicating the formation and depletion of competing oxidation byproducts. Finally, the models predicted that the rate of MPB decay was a maximum either at alkaline pH and a high sepiolite dose (k = 1.68 × 10^-1 min^-1), or at acidic pH and a considerably lower dose of the mineral (k = 1.48 × 10^-1 min^-1).

Preparation of a novel Z-scheme KTaO3/FeVO4/Bi2O3 nanocomposite for efficient sonocatalytic degradation of ceftriaxone sodium

In this work, a novel Z-scheme sonocatalyst, KTaO₃/FeVO₄/Bi₂O₃, is prepared via ultrasonic-assisted isoelectric point method. The prepared samples are characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray photoelectron spectroscopy (XPS) and photoluminescence (PL) spectroscopy. The catalytic activity of Z-scheme KTaO₃/FeVO₄/Bi₂O₃ sonocatalyst is studied in degradation of ceftriaxone sodium under ultrasonic irradiation. In addition, the influences of ultrasonic irradiation time, scavengers and sonocatalyst used times on sonocatalytic degradation of ceftriaxone sodium are examined. Under the experimental conditions of 150 min ultrasonic irradiation time, 1.00 g/L KTaO₃/FeVO₄/Bi₂O₃ addition amount and 10.00 mg/L ceftriaxone sodium concentration, the sonocatalytic degradation ratio of ceftriaxone sodium achieves 81.30%. Finally, the possible sonocatalytic degradation mechanism of ceftriaxone sodium caused by Z-scheme KTaO₃/FeVO₄/Bi₂O₃ sonocatalyst is proposed. The enhanced sonocatalytic activity may be attributed to the fact that the FeVO₄ as a special conductive channel provides a strong driving force to transfer electrons through valence state changes of iron and vanadium, which accelerates electron transfer from conduction band (CB) of Bi₂O₃ to valence band (VB) of KTaO₃. Perhaps, the KTaO₃/FeVO₄/Bi₂O₃ composite is an excellent Z-scheme sonocatalyst which can be used to effectively degrade the organic pollutants in wastewater under ultrasonic irradiation.

Ambient aqueous-phase synthesis of covalent organic frameworks for degradation of organic pollutants

Herein we report the first case of a β-ketoenamine based Michael addition–elimination reaction as well as ambient aqueous-phase synthesis of highly crystalline COF materials.

The development of a mild, low cost and green synthetic route for covalent organic frameworks (COFs) is highly desirable in order to open the door for practical uses of this new family of crystalline porous solids. Herein, we report a general and facile strategy to prepare a series of microporous or mesoporous COFs by a β-ketoenamine based Michael addition–elimination reaction in aqueous systems at ambient temperature and pressure. This synthesis method not only produces highly crystalline and porous COFs, but also can be carried out with a high reaction rate (only 30 min), high yields (as high as 93%) and large-scale preparation (up to 5.0 g). Furthermore, an Fe(ii)-doped COF shows impressive performance in the oxidative degradation of organic pollutants in aqueous medium. This research thus provides a promising pathway to large-scale green preparation of COFs and their potential application in environmental remediation.

Sonocatalytic treatment of phosphonate containing industrial wastewater intensified using combined oxidation approaches

Treatment of actual industrial wastewater is a challenging task and has not been investigated using the cavitation-based approaches significantly. In the present work, sonocatalytic degradation (catalysts as CuO and TiO₂) of phosphonate based industrial wastewater, procured from a local company, has been studied in terms of COD reduction under optimized conditions (established using initial studies involving only ultrasound) of pH as 3.2, the temperature of 32 ± 2 °C and 120 min as treatment time. The combination of ultrasound with H₂O₂ and ozone in different approaches has been investigated for maximizing the COD reduction. The optimum set of operating conditions for the sonocatalytic degradation were established as power dissipation of 90 W and catalyst loading as 0.75 g/L for CuO and 0.5 g/L for TiO₂. Use of only ultrasound resulted in COD reduction of 37.2% whereas the combination of US with different approaches resulted in higher extents of COD reduction. The combined operation of US + H₂O₂ + O₃, US + O₃ + H₂O₂ + CuO, and US + O₃ + H₂O₂ + TiO₂ resulted in the extent of COD reduction as 91.5%, 93.8%, and 95.8% respectively. Overall, it has been clearly established that maximum COD reduction is obtained for the combined operation of sonocatalysis (catalyst as TiO₂) with ozone and H₂O₂.

Recent advancements in the sonophotocatalysis (SPC) and doped-sonophotocatalysis (DSPC) for the treatment of recalcitrant hazardous organic water pollutants

Sonophotocatalysis (SPC) is considered to be one of the important wastewater treatment techniques and hence attracted the attention of researchers to eliminate recalcitrant hazardous organic pollutants from aqueous phase. In general, SPC refers to the integrated use of ultrasonic sound waves, ultraviolet radiation and the addition of a semiconductor material which functions as a photocatalyst. Current research has brought numerous improvements in the SPC based treatment by opting visible light irradiation, nanocomposite catalysts and numerous catalyst supports for better stability and performance. This review accomplishes a critical analysis with respect to the recent advancements. The efficiency of SPC based treatments has been analyzed by considering the individual methods i.e. sonolysis, photocatalysis, sonophotolysis, sono-ozone, photo-Fenton and sono-Fenton. Besides, the essential parameters such as solution temperature, concentrations of initial pollutant and catalyst, initial pH, dosages of Fenton's reagent and hydrogen peroxide (H₂O₂), ultrasonic power density, gas sparging, addition of radical scavenger, addition of carbon tetrachloride and methanol have been discussed with suggestions for the selection of optimum parameters. A higher synergistic pollutant removal rate has been reported during SPC treatment as compared to individual methods and the implementation of numerous doping materials and supports for the photocatalyst enhances the degradation rate of pollutants using DSPC under both visible and UV irradiation. Overall, SPC and DSPC based wastewater treatments are emerging as potential techniques as they provide effective solution in removing the recalcitrant organic pollutants and progressive research is expected to bring out superior treatment efficiency using these advanced technologies.

IMPORTANCE OF THIS REVIEW

The review has accomplished a thorough and a critical analysis of sonophotocatalysis (SPC) based on the recently published journals. Recent advancements in the doped sonophotocatalysis (DSPC) and the mechanisms behind synergistic enhancement in the pollutant degradation rate have been discussed with justifications. Besides, the possible future works are suggested for the advancements in sonophotocatalysis based treatment. This review will be beneficial for electing a SPC based method because of the accomplished sharp comparisons among the published results. The review includes current advancements of SPC based methods which aid for a low-cost and a large-scale wastewater treatment application.

Intensification of abamectin pesticide degradation using the combination of ultrasonic cavitation and visible-light driven photocatalytic process: Synergistic effect and optimization study

Degradation of abamectin pesticide was carried out using visible light driven Cu₂(OH)PO₄-HKUST-1 MOF photocatalyst through the sonophotocatalytic technique. Cu₂(OH)PO₄-HKUST-1 MOF as a visible-light driven photocatalyst, was synthesized and characterized by XRD, SEM, EDS and DRS. The direct bang gaps of HKUST-1 MOF and Cu₂(OH)PO₄-HKUST-1 MOF were estimated about 2.63 and 2.59eV, respectively, which reveals that these photocatalysts can be activated under blue light illumination. All sonophotodegradation experiments were performed using a continuous flow-loop reactor. The central composite design (CCD) methodology was applied for modeling, optimization and investigation of influence of operational parameters, i.e. irradiation time, pH, solution flow rate, oxygen flow rate, initial concentration and photocatalyst dosage on the sonophotocatalytic degradation of abamectin. The maximum degradation efficiency of 99.93% was found at optimal values as 20min, 4, 90mL/min, 0.2mL/min, 30mg/L and 0.4g/L, for irradiation time, pH, solution flow rate, oxygen flow rate, initial concentration and photocatalyst dosage, respectively. Evaluation of the synergism in the combination of ultrasonic and photocatalysis lead to a synergistic index of 2.19, which reveals that coupling of ultrasonic and photocatalysis has a greater efficiency than the sum of individual procedures for degradation of abamectin.

Degradation of a cationic dye (Rhodamine 6G) using hydrodynamic cavitation coupled with other oxidative agents: Reaction mechanism and pathway

In the present study, decolorization and mineralization of a cationic dye, Rhodamine 6G (Rh6G), has been carried out using hydrodynamic cavitation (HC). Two cavitating devices such as slit and circular venturi were used to generate cavitation in HC reactor. The process parameters such as initial dye concentration, solution pH, operating inlet pressure, and cavitation number were investigated in detail to evaluate their effects on the decolorization efficiency of Rh6G. Decolorization of Rh6G was marginally higher in the case of slit venturi as compared to circular venturi. The kinetic study showed that decolorization and mineralization of the dye fitted first-order kinetics. The loadings of H₂O₂ and ozone have been optimized to intensify the decolorization and mineralization efficiency of Rh6G using HC. Nearly 54% decolorization of Rh6G was obtained using a combination of HC and H₂O₂ at a dye to H₂O₂ molar ratio of 1:30. The combination of HC with ozone resulted in 100% decolorization in almost 5-10min of processing time depending upon the initial dye concentration. To quantify the extent of mineralization, total organic carbon (TOC) analysis was also performed using various processes and almost 84% TOC removal was obtained using HC coupled with 3g/h of ozone. The degradation by-products formed during the complete degradation process were qualitatively identified by liquid chromatography-mass spectrometry (LC-MS) and a detailed degradation pathway has been proposed.

Role of Ni in hetero-architectured NiO/Ni composites for enhanced catalytic performance

The effect of Ni in NiO/Ni nanocomposites and their contribution in photoelectrooxidation of dyes and substituted phenols were studied.

Sonochemical degradation of methyl orange in the presence of Bi2WO6: Effect of operating parameters and the generated reactive oxygen species

The Bi2WO6 was prepared by the hydrothermal method and its sonocatalytic activity was studied in the degradation of methyl orange (MO) solutions. The effects of catalytic activity of Bi2WO6 on dye were inspected by the change in absorbance of dye with UV-vis spectrometer. The influences of operational parameters such as the addition amount of Bi2WO6, pH, the initial concentration of dyes, ultrasonic power and irradiation time on the degradation ratio were investigated. In addition, the obtained results indicated that the kinetics of sonochemical reactions of MO were consistent with the pseudo first-order kinetics and Bi2WO6 had excellent reusability and stability during the sonochemical degradation processes. The generation and kinds of reactive oxygen species (ROS) and their influence on the sonochemical degradation of MO were determined by the methods of oxidation-extraction spectrophotometry and ROS scavengers. The results indicate that the degradation of MO in the presence of Bi2WO6 under ultrasonic irradiation is related to the generation of ROS, in which both singlet molecular oxygen ((1)O2) and hydroxyl radical (OH) play important roles in the sonochemical degradation of MO. These experimental results provide a sound foundation for the further development of Bi2WO6 as a sonocatalyst in wastewater treatment.

Synthesis of Fe-doped Bi2O3 nanocatalyst and its sonophotocatalytic activity on synthetic dye and real textile wastewater

The catalysts such as Fe, Bi₂O₃, and Fe-doped Bi₂O₃ were synthesized for the sonophotocatalytic treatment of synthetic dye and real textile wastewater. The resultant catalysts were characterized for its size and uniform shape using x-ray diffractogram (XRD) and scanning electron microscopy (SEM) which signified the nanorod shape formed Bi₂O₃. The higher ultraviolet light absorbance capacity of the catalysts was also evident using diffuse reflectance spectroscopy (DRS). Initially, the effect of conventional parameters such as initial pH, gas bubbling (argon, oxygen, air and nitrogen) and oxidant addition (H₂O₂ and peroxymonosulfate) in the presence of sonolysis (22 and 37 kHz frequency) and photolysis (UV-C light) on 10 ppm Basic Brown 1 dye was studied. The results showed that highest decolorization of 62 % was attained for 3 g/L peroxymonosulfate under 37 kHz frequency sonolysis treatment. Secondly, with the catalyst study, highest of 46 % dye color removal was obtained with 4 g/L Fe under 37 kHz frequency sonolysis treatment. The sonophotocatalytic treatment of dye with Fe-doped Bi₂O₃ catalyst in combination with peroxymonosulfate showed highest color removal of 99 %. Finally, the sonophotocatalytic treatment of real textile wastewater in the presence of 3 g/L Fe-doped Bi₂O₃ and 6 g/L peroxymonosulfate reduced the total organic carbon (TOC) and chemical oxygen demand (COD) level to 77 and 91 %, respectively, in 180 min. The reported treatment process was found to treat the synthetic dye and real textile wastewater effectively.

Modification of nanosized natural montmorillonite for ultrasound-enhanced adsorption of Acid Red 17

This work aims to modify montmorillonite (MMT) via dodecyltrimethylammonium bromide (DTMA) and investigate its ability in ultrasound (US) assisted decolorization of a polluted solution. BET surface area of MMT was increased from 19.76 to 42.57 m(2)/g and basal spacing of MMT structural layers was increased from 1.13 to 1.69 nm by DTMA modification. The application of DTMA-modified MMT (DTMA-MMT) and US for the decolorization of Acid Red 17 (AR17) showed that US could improve the ability of DTMA-MMT on decolorization of AR17 solution due to simultaneous adsorption and sonocatalysis. The ability of US assisted DTMA-MMT was slightly decreased with pH, the initial dye concentration and the presence of inorganic anions.

Kinetic modeling and determination role of sono/photo nanocatalyst-generated radical species on degradation of hydroquinone in aqueous solution

Experimental findings of sonophotocatalytic process were used in degradation of hydroquinone to assess kinetic modeling and determine the effect of various active radical species. First, the effects of three photocatalytic, sonocatalytic, and sonophotocatalytic processes were studied for hydroquinone removal to determine kinetic constants and calculate the activation energy of reactions, and then the selected process was evaluated to determine active radical species. The reactor was composed of two parts, one included ultrasonic probe (sonocatalytic part) with powers 22, 80, and 176 W and the second part was the location of UV lamp (photocatalytic part) with tubular flow and power 15 W. After three systems were examined and the efficient system was selected, the role of different active species such as hydroxyl radical (OH(·)), superoxide radical (O2 (·-)), hole (h(+)), electrons (e (-)), and single oxygen molecule ((1)O2) and contribution of each of them were determined in hydroquinone degradation. According to tests, the results of this study showed that sonophotocatalytic integrated method as selected system among three systems studied followed the first-order equation for hydroquinone degradation and active hydroxyl species with 45 % and electron and hole with 15 and 10 %, respectively, had the highest and lowest contributions to conversion of hydroquinone. The findings showed that dissolved oxygen increases the capability of active radical formation so that 28.2 % of hydroquinone removal was increased under aeration compared to without aeration. Also, removal efficiency decreased 62 % with N2 injection due to the withdrawal of oxygen from the sample. By adding 25 Mm of sodium azide (NaN3) to stock solution, 46.5 % reduction was developed because single oxygen ((1)O2) played the role of an active species. The advantages of integrated sonocatalytic and photocatalytic method are the generation of active radical species with more variety and ultimately the formation of higher amounts of powerful hydroxyl radical that increases degradation rates of refractory compounds and low-risk internal and final products. It has an appropriate performance in the degradation of refractory compounds by optimizing effective operational factors.

HKUST-1-MOF–BiVO4 hybrid as a new sonophotocatalyst for simultaneous degradation of disulfine blue and rose bengal dyes: optimization and statistical modelling

A new hybrid material composed of BiVO₄ and HKUST-1 MOF (HKUST-1-MOF–BiVO₄), which is active under blue light irradiation, was synthesized and characterized by XRD, FE-SEM, BET, BJH, EDS and DRS analysis.

Degradation of organic pollutants and microorganisms from wastewater using different dielectric barrier discharge configurations--a critical review

The growing global drinking water crisis requires the development of novel advanced, sustainable, and cost-effective water treatment technologies to supplement the existing conventional methods. One such technology is advanced oxidation based on dielectric barrier discharge (DBD). DBD such as single and double planar and single and double cylindrical dielectric barrier configurations have been utilized for efficient degradation of recalcitrant organic pollutants. The overall performance of the different DBD system varies and depends on several factors. Therefore, this review was compiled to give an overview of different DBD configurations vis-a-viz their applications and the in situ mechanism of generation of free reactive species for water and wastewater treatment. Our survey of the literature indicated that application of double cylindrical dielectric barrier configuration represents an ideal and viable route for achieving greater water and wastewater purification efficiency.

Degradation of magenta dye using different approaches based on ultrasonic and ultraviolet irradiations: Comparison of effectiveness and effect of additives for intensification

The conventional chemical oxidation methods have not been very successful for the treatment of dyes due to higher stability against the oxidizing agents. The present work investigates the application of an improved treatment approach based on the ultrasonic and ultraviolet irradiations for treatment of dye containing wastewaters. Magenta dye, which is commonly used in textile industries, has been used as a model compound. Initially, the experiments have been performed using individual operation of ultrasonic and ultraviolet irradiations. Studies related to effect of concentration revealed that the extent of degradation increased with an increase in the concentration of dye solution till an optimum loading. Intensification of the extent of degradation using ultrasonic irradiation has been investigated using different additives such as NaCl, TiO2, air and starch. Also the efficacy of combined treatment approaches based on different approaches involving ultrasound, ultraviolet irradiation and additives for the removal of magenta dye from the aqueous solution have been evaluated. For the use of additives, maximum intensification was achieved for TiO2 followed by use of NaCl and least effect was observed for starch. For the combined treatment approaches, the maximum extent of degradation (98.8%) and maximum COD removal (94.0%) has been obtained for the combination of ultrasound with 1 g/L TiO2 and air. The present work has clearly demonstrated the efficacy of combined treatment approaches for removal of dyes from the wastewater.