Manothermosonication (MTS) treatment by a continuous-flow system: Effects on the degradation kinetics and microstructural characteristics of citrus pectin

Understanding the atmospheric cold plasma-induced modification of finger millet (Eleusine coracana) starch and its related mechanisms

This research was conducted to evaluate the effects of cold plasma (CP) on finger millet starch (FMS). FMS was exposed to partially ionized gas at varying voltages (170, 200, and 230 Volt) for varied time (10, 20, and 30 mins). The impact of treatment was studied using physico-chemical, and functional properties, and the mechanisms of starch modification occurring were stated. A significant reduction in the degree of polymerization was noticed based on parameters like reducing sugar, amylose content, solubility, and molecular weight. However, in certain voltage and time combinations, crosslinking was also confirmed by analysis such as XRD, FTIR, DSC, etc. The properties of starch were altered such as remarkable increase in water solubility by 6.7 times for highest voltage and longest time (230 V/30 min) was registered. NMR data suggested valuable findings- oxidation of OH group at C6 position of starch led to formation of carbonyl group followed by carboxyl group. NMR also showed a decrease in OH protons confirming crosslinking and hence all these analyses helped to conclude findings about the quality changes using CP. It was observed that the highest voltage and considerably longer exposure time of 20 and 30 min induced significant changes in the FMS.

Physicochemical and antioxidant properties of pectin fractions extracted from lemon (Citrus Eureka) peels

Pectin, a natural polysaccharide, holds versatile applications in food and pharmaceuticals. However, there is a need for further exploration into extracting novel functional fractions and characterizing them thoroughly. In this study, a sequential extraction approach was used to obtain three distinct lemon pectin (LP) fractions from lemon peels (Citrus Eureka): LP extracted with sodium acetate (LP-SA), LP extracted with ethylenediaminetetraacetic acid (LP-EDTA), and LP extracted with sodium carbonate and sodium borohydride (LP-SS). Comprehensive analysis revealed low methyl-esterification in all fractions. LP-SA and LP-SS displayed characteristics of rhamnogalacturonan-I type pectin, while LP-EDTA mainly consisted of homogalacturonan pectin. Notably, LP-SA formed self-aggregated particles with rough surfaces, LP-EDTA showed interlocking linear structures with smooth planes, and LP-SS exhibited branch chain structures with smooth surfaces. Bioactivity analysis indicated that LP-SA had significant apparent viscosity and ABTS radical scavenging activity, while both LP-EDTA and LP-SS showed excellent thermal stability according to thermogravimetric analysis (TGA). Furthermore, LP-SS exhibited remarkable gel-forming ability and significant hydroxyl free radicals scavenging activity. In conclusion, this study presents a novel method for extracting various lemon pectin fractions with unique structural and bioactive properties, contributing insights for advanced applications in the food and pharmaceutical sectors.

Evaluation of citrus pectin extraction methods: Synergistic enhancement of pectin's antioxidant capacity and gel properties through combined use of organic acids, ultrasonication, and microwaves

The biological potency of pectin is intricately intertwined with its intricate molecular architecture. The fine structure of pectin is influenced by the extraction method, while the specific impact of these methods on the fine structure and the affected attributes thereof remains enigmatic. This study delves into the profound analysis of eight distinct extraction methods influence on the structure and biological activity of citrus peel pectin. The findings demonstrate that citric acid ultrasound-assisted microwave extraction yields pectin (PectinCA-US/MV) with higher viscosity and a dense, rigid chain. Pectin extracted with acetic acid ultrasound (PectinAA-US) and citric acid ultrasound (PectinCA-US) exhibits elevated galacturonic acid (GalA) levels and reduced D-galactose (Gal) content, enhancing antioxidant activity. Eight pectin-chitosan (CS) hydrogels, especially PectinCA-US/MV-CS, demonstrate commendable thermal stability, rheological properties, self-healing capability, and swelling behavior. This study characterizes citrus peel pectin properties from different extraction methods, laying a foundation for its application in food, pharmaceuticals, and industry.

Effect of pulp cell wall polysaccharides on citrus fruit with different mastication traits

Mastication trait is a primary quality attribute of citrus fruit, influencing consumer demands and industrial processing conditions. However, the underlying causes of differences in mastication traits of citrus remain unclear. In this study, microscopy, spectroscopy and diffraction techniques were applied to investigate the physicochemical properties of Hongmeiren (HMR), Satsuma (WM) and Nanfeng tangerine (NF) with superior, moderate and inferior mastication traits, respectively. Ultrastructure indicated that NF had more neatly arranged and regularly shaped cells than HMR and WM. The monosaccharide composition of NF revealed that multi-branched Na2CO3-soluble pectin (NSF) enhanced intercellular adhesion. Additionally, FT-IR analysis revealed more intense vibrations of O2-H····O6 intramolecular hydrogen bonds within NF cellulose, which resulted in a higher crystallinity of cellulose (73.75%) than HMR (32.53%) and WM (43.76%). Overall, the high content and crystallinity of cellulose, the multi-branched NSF and the high content of hemicellulose contributed to the inferior mastication trait of citrus fruit.

Comparison of characterization and antioxidant activity of different citrus peel pectins

Pectins obtained from citrus peel of different cultivars and growth regions were compared based on physicochemical properties and antioxidant activity in vitro. The physicochemical features were elucidated using Fourier transform infrared (FT-IR), molecular weight distribution, monosaccharide composition, thermal behaviors and flow behaviors. Results showed that the different cultivars and growing areas have significant effects on the properties of citrus peel pectins (CPPs). Citrus peel pectins extracted by acetic acid were highly heterogeneous polysaccharides with broad molecular weight distributions and had high proportions of the RG-I domain. Among the 10 kinds of citrus peel pectins, Shatangju (CPP-6) and Xuecheng (CPP-7) own superior antioxidant biological activity and Dahongpao (CPP-3) and Buzhihuo (CPP-9) had excellent functional properties (thermal stability and viscosity). According to the correlation analysis, molecular weight, galacturonic acid content and degree of methyl-esterification were beneficial to increase the thermal stability and viscosity of citrus peel pectins, while the rhamnose content, rhamnogalacturonan I region and lower molecular weight can improve citrus peel pectins antioxidant activity. Our findings suggest that CPP-6 and CPP-7 may be useful as a potential natural antioxidant in pharmaceutical and cosmetic industries. Meanwhile, CPP-3 has great application potential in high temperature food and CPP-9 can be used as a thickener or stabilizer in the food industry.

A review of sugar beet pectin-stabilized emulsion: extraction, structure, interfacial self-assembly and emulsion stability

In recent years, sugar beet pectin as a natural emulsifier has shown great potential in food and pharmaceutical fields. However, the emulsification performance depends on the molecular structure of sugar beet pectin, and the molecular structure is closely related to the extraction method. This review summarizes the extraction methods of pectin, structure characterization methods and the current research status of sugar beet pectin-stabilized emulsions. The structural characteristics of sugar beet pectin (such as degree of methylation, degree of acetylation, degree of blockiness, molecular weight, ferulic acid content, protein content, neutral sugar side chains, etc.) are of great significance to the emulsifying activity and stability of sugar beet pectin. Compared with traditional hot acid extraction method, ultrasonic-assisted extraction, microwave-assisted extraction, subcritical water-assisted extraction, induced electric field-assisted extraction and enzyme-assisted extraction can improve the yield of sugar beet pectin. At the same time, compared with harsh extraction conditions (too high temperature, too strong acidity, too long extraction time, etc.), mild extraction conditions can better preserve these emulsifying groups in sugar beet pectin molecules, which are beneficial to improve the emulsifying properties of sugar beet pectin. In addition, the interfacial self-assembly behavior of sugar beet pectin induced by the molecular structure is crucial to the long-term stability of the emulsion. This review provides a direction for extracting or modifying sugar beet pectin with specific structure and function, which is instructive for finding alternatives to gum arabic.

Hybrid techniques of pre and assisted processing modify structural, physicochemical and functional characteristics of okra pectin: Controlled-temperature ultrasonic-assisted extraction from preparative dry powders and its field monitoring

Diversiform okra dry powders were prepared and controlled-temperature ultrasonic-assisted extraction (CTUAE) was then utilized to obtain okra pectin (OP) from the preparative powders. During processing of hybrid techniques, 6 types of dry powders were prepared through different drying technologies (hot air drying, HD; freeze-drying, FD) and meshes (60, 80, 120 meshes) at first. Next, the extraction yield, physicochemical and function characteristics, and molecular structure of OP were analyzed with or without CTUAE technique. Meanwhile, the time-frequency domains of acoustic fields during extraction process of OP were monitored to analyze the effects of ultrasonic fields. Results showed that OP main chains with less cracking by FD than that by HD; the yield, GalA, esterification degree (DE), M_w and viscosity of OP increased, but its particle size decreased. Water holding capacity (WHC) and oil holding capacity (OHC) of OP by HD were more prominent. Secondly, HD OP had dendritic rigid chains, while FD OP had flexible chains with multiple branches. For HD OP, as meshes of okra dry powders decreased, GalA, viscosity and emulsification ability decreased; while gel strength and thermal stability increased. For FD OP, the reduction of meshes improved thermal stability. Above all, CTUAE technique increased the yield and GalA, and decreased DE, M_w and particle size of OP. In terms of functional characteristics, the technique also improved gel strength, resilience and viscoelasticity, enhanced emulsifying stability, WHC and thermal stability, and reduced viscosity. Finally, the correlation between functional and structural characteristics of OP was quantified, and some suggestions were made for its application in food areas.

Trends in "green" and novel methods of pectin modification - A review

Modification of hydrocolloids to alter their functional properties using chemical methods is well documented in the literature. There has been a recent trend of adopting eco-friendly and "green" methods for modification. Pectin, being a very important hydrocolloid finds its use in various food applications due to its gelling, emulsifying, and stabilizing properties. The adoption of various "green" methods can alter the properties of pectin and make it more suitable for incorporation in food products. The novel approaches such as microwave and pulsed electric field can also be utilized for solvent-free modification, making it desirable from the perspective of sustainability, as it reduces the consumption of organic chemicals. Pectic oligosaccharides (POSs) produced via novel approaches are being explored for their biological properties and incorporation in various functional foods. The review can help to set the perspective of potential scale-up and adoption by the food industry for modification of pectin.

Changes in pectin characteristics of jujube fruits cv "Dongzao" and "Jinsixiaozao" during cold storage

Softening is one of the main factors affecting market value and consumer preferences for jujubes, and it was closely related to the modification and depolymerization of pectin. Changes in characteristics of three pectins (water-soluble pectin (WSP), sodium carbonate-soluble pectin (SSP) and chelate-soluble pectin (CSP)), including their contents, degree of methylesterification (DM), neutral sugar compositions, the molecular weight (M_w ) distributions and nanostructures, from two jujube fruits cv Dongzao (DZ) and Jinsixiaozao (JS) during cold storage were assessed. The results showed that variation in pectin characteristics during cold storage was similar between DZ and JS. The reduction of firmness corresponded to a conversion of water-insoluble pectin to WSP during cold storage. DM of WSP presented an increase trend in the late storage. Rhamnose (Rha), arabinose (Ara) and glucose (Glc) were the crucial compositions in three pectins, and most neutral sugar compositions in three pectins first increased and then decreased during cold storage. Changes in the ratio of (galactose (Gal)+Ara)/Rha and Ara/Gal represented that the branch chains of rhamnogalacturonan-I in three pectins depolymerized after storage. The high M_w in WSP and SSP of jujubes were solubilized and extensively depolymerized into pectin with lower M_w after storage. AFM images showed an increase in short chains and branch structures of three pectins after storage. Overall, three pectins in DZ and JS depolymerized and solubilized during cold storage. WSP and SSP were more contributed to the softening of jujubes compared to CSP, and they played the critical role for regulating the softening of jujube fruits during cold storage. PRACTICAL APPLICATION: Softening is one of the main factors affecting market value and consumer preferences for jujubes, and it was closely related to the modification and depolymerization of pectin. Changes in characteristics of three pectins (WSP, SSP, CSP), including their contents, degree of methylesterification, neutral sugar compositions, the molecular weight distributions and nanostructures, from two jujube fruits cv Dongzao (DZ) and Jinsixiaozao (JS) during cold storage were assessed. Three pectins in DZ and JS depolymerized and solubilized during cold storage. WSP and SSP were more contributed to the softening of jujubes compared to CSP, and they played the critical role for regulating the softening of jujube fruits during cold storage. This study would elucidate the mechanism of jujube softening and help to regulate the postharvest quality during cold storage.

Recent innovations of ultrasound green technology in herbal phytochemistry: A review

Ultrasound (US) has become one of the most important techniques in green chemistry and emerging technologies. Many research investigations documented the usefulness of US in a wide range of applications in food science, nanotechnology, and complementary medicine, where effective extraction of natural products is important. However, as with all novel technologies, US has advantages and limitations that require clarification for full adaptation at an industrial scale. The present review discusses recent applications of US in herbal phytochemistry with the emphasis on US effects on chemical structures of bioactive compounds extracted from herbs and their bioactivities. The impact of different US processing conditions such as frequency, intensity, duration, temperature, and pressure on the effectiveness of the extraction process and the properties of the extracted materials are also discussed. Different frequencies and intensities of US have demonstrated its potential applications in modifying, determining, and predicting the physicochemical properties of herbs and their extracts. US has important applications in nanotechnology where it supports the fabrication of inexpensive and eco-friendly herbal nanostructures, as well as acoustic-based biosensors for chemical imaging of the herbal tissues. The application of US enhances the rates of chemical processes such as hydrolysis of herbal fibers, which reduces the time and energy consumed without affecting the quality of the final products. Overall, the use of US in herbal science has great potential to create novel chemical constructions and to be used as an innovative diagnostic system in various biomedical, food, and analytical applications.

Physicochemical and macromolecule properties of RG-I enriched pectin from citrus wastes by manosonication extraction

The properties of pectin extracted from mandarin citrus peels by manosonication extraction (MSp) were systematically studied and compared with pectin obtained by the conventional maceration method (CMp). The yield of MSp (25.5%) was significantly higher than that of CMp (18.3%), while MSp exhibited two Mw fraction distributions. Monosaccharide analysis demonstrated that MSp had more branched RG-I regions (78.3 mol%) than CMp (36.6 mol%) with a high content of arabinose and galactose. The branched-chain morphological characteristics of samples were directly imaged by atomic force microscopy. MSp exhibited a significantly lower degree of methoxylation than CMp by FT-IR and NMR analysis, but X-ray diffraction analysis showed little difference in the level of crystallinity. Moreover, MSp and CMp showed non-Newtonian behaviour, and the increasing order of apparent viscosities was 1.0 w/v% MSp < 1.0 w/v% CMp < 2.0 w/v% CMp < 2.0 w/v% MSp. Thermal analysis and weight loss measurements indicated MSp exhibited greater thermal stability. The results also indicated that both MSp and CMp significantly enhanced the emulsion activity at high concentrations; the emulsions containing 1.5 w/v% pectin showed no phase separation over 21 days, suggesting that MSp could be a potential effective stabiliser in the food and beverage industry.

Citrus pectin modified by microfluidization and ultrasonication: Improved emulsifying and encapsulation properties

In this study, modified citrus pectin treated with a combination of microfluidization and ultrasonication was compared to the original and ultrasonication treated pectin on hydrodynamic diameter, molecular weight, polydispersity, zeta potential, apparent viscosity, Fourier-transform infrared spectroscopy (FTIR), 2,2-diphenyl-1-picryl hydrazyl (DPPH) radical scavenging capacity, scanning electron microscope (SEM), atomic force microscopy (AFM), their emulsifying properties and encapsulation properties. Modified pectin treated with a combination of microfluidization and moderate ultrasonication (MUB) was found to have lowest hydrodynamic diameter (418 nm), molecular weight (237.69 kDa) and polydispersity (0.12), and relatively low apparent viscosity among all pectin samples. Furthermore, it showed significantly higher DPPH radical scavenging capacity than the original pectin although only slightly higher than that of ultrasonication treated one (UB). MUB showed a thin fibrous morphology and decreased degree of branching from SEM and AFM. Emulsion stabilized by MUB had highest centrifugal and thermal stability compared to emulsions stabilized by UB and the original pectin. This could be attributed to higher interfacial loading of MUB (17.90 mg/m²) forming more compact interfacial layer observed by confocal laser scanning microscopy (CLSM). Moreover, both MUB and UB exhibited improved encapsulation functionality to protect cholecalciferol (vitamin D₃) from UV degradation compared to the original pectin.

Food preservation techniques and nanotechnology for increased shelf life of fruits, vegetables, beverages and spices: a review

Food wastage is a major issue impacting public health, the environment and the economy in the context of rising population and decreasing natural resources. Wastage occurs at all stages from harvesting to the consumer, calling for advanced techniques of food preservation. Wastage is mainly due to presence of moisture and microbial organisms present in food. Microbes can be killed or deactivated, and cross-contamination by microbes such as the coronavirus disease 2019 (COVID-19) should be avoided. Moisture removal may not be feasible in all cases. Preservation methods include thermal, electrical, chemical and radiation techniques. Here, we review the advanced food preservation techniques, with focus on fruits, vegetables, beverages and spices. We emphasize electrothermal, freezing and pulse electric field methods because they allow both pathogen reduction and improvement of nutritional and physicochemical properties. Ultrasound technology and ozone treatment are suitable to preserve heat sensitive foods. Finally, nanotechnology in food preservation is discussed.