Enhanced sorption of naphthalene and p-nitrophenol by nano-SiO2 modified with a cationic surfactant

Effects of Al substitution on sorption of diclofenac to Fe(III) (hydr)oxides: roles of phase transition and sorption mechanisms

Fe(III) (hydr)oxides commonly contained many metal impurities such as Al. The incorporation of Al might change the properties of minerals and consequently affect sorption behaviors of pollutants with polar functional groups (e.g., diclofenac (DCF)). In this study, batch experiments and microscale characterization were conducted to investigate the DCF sorption mechanisms to goethite and Al-substituted minerals. Goethite and Al-substituted products (including Al-goethite, Al-goethite-hematite, and Al-hematite) were synthesized with different Al contents (i.e., 0%, 5%, 10%, and 15% (in mol)) by co-precipitation method. Due to difference of ionic radius between Al and Fe and formation of excessive -OH, Al substitution resulted in deviation of cell parameters from the Vegard line. Al substitution caused increasing -OH in Al-goethite and phase transformation caused decreasing -OH in Al-hematite. The total -OH in minerals was positively related to DCF sorption capacity. In the lower initial concentration range (0.4-9 mg/L), the sorption distribution coefficient (K_d) values of goethite, Al-goethite, and Al-hematite were 21.98, 22.25, and 21.18 L/kg, respectively. Desorption characteristics and ion strength effects indicated that DCF sorption to minerals occurred mainly through outer-sphere complexation. Fourier transform infrared analyses revealed that H-bonds could be formed through -OH of minerals and -COOH of DCF, and the H-bond strength on Al-hematite was stronger than that on goethite/Al-goethite. In the normal environmental pH (e.g., 6.0 to 8.0), K_d values of DCF decreased linearly with increasing pH. These findings are helpful for understanding of DCF migration in environment involving Al-substituted minerals.

Exposure-based ecotoxicity assessment of Co3O4 nanoparticles in marine microalgae

The exposure-effect study was conducted to evaluate the effect of Co₃O₄ nanoparticles on Tetraselmis suecica. The growth suppressing effect has been observed during the interaction between nanoparticles and microalgae as indicated by 72 h EC₅₀ (effective concentration of a chemical at which 50% of its effect is observed) value (45.13±3.95 mg/L) of Co₃O₄ nanoparticles for Tetraselmis suecica. Decline in chlorophyll a content also indicated the compromised photosynthetic ability and physiological state of microalgae. Further biochemical investigation such as increase in extracellular LDH (lactate dehydrogenase) level, ROS (reactive oxygen species), and levels of membrane lipid peroxidation in treated samples signifies the compromised cellular health and membrane disintegration caused by nanoparticles. Parallel to this, the cell entrapment, membrane damage, and attachment of nanoparticles on cell surface were also visualized by SEM-EDX (scanning electron microscope-energy dispersive X-ray) microscopy. The overall results of this study clearly indicated that Co₃O₄ nanoparticles might have toxic effects on growth of marine microalgae and other aquatic life forms as well. Hence, release of Co₃O₄ nanoparticles in aquatic ecosystem and resulting ecotoxic effect should be broadly addressed.

Ag/AgCl@MIL-88A(Fe) heterojunction ternary composites: towards the photocatalytic degradation of organic pollutants

The efficient utilization of solar energy has received tremendous interest due to the increasing environmental and energy concerns. The present paper discusses the efficient integration of a plasmonic photocatalyst (Ag/AgCl) with an iron-based metal-organic framework (MIL-88A(Fe)) for boosting the visible light photoreactivity of MIL-88A(Fe). Two composites of Ag/AgCl@MIL-88A(Fe), namely MAG-1 and MAG-2 (stoichiometric ratio of Fe to Ag is 5 : 1 and 2 : 1), were successfully synthesized via facile in situ hydrothermal methods followed by UV reduction. The synthesized composite materials are characterized by FTIR, PXRD, UVDRS, PL, FESEM/EDX, TEM and BET analyses. The Ag/AgCl@MIL-88A(Fe) (MAG-2) hybrid system shows excellent photocatalytic activity for the degradation of p-nitrophenol (PNP), rhodamine B (RhB), and methylene blue (MB) under sunlight. We found that 91% degradation of PNP in 80 min, 99% degradation of RhB in 70 min and 94% degradation of MB in 70 min have taken place by using MAG-2 as a catalyst under sunlight. The superior activity of Ag/AgCl@MIL-88A(Fe) (MAG-2) is attributed to the synergistic effects from the surface plasmon resonance (SPR) of Ag NPs and the electron transfer from MIL-88A(Fe) to Ag nanoparticles for effective separation of electron-hole pairs. Furthermore, the mechanism of degradation of PNP, RhB and MB is proposed by analyzing the electron transfer pathway in Ag/AgCl@MIL-88A(Fe).

Nonlinear sorption of phenols and anilines by organobentonites: Nonlinear partition and space limitation for partitioning

Organobentonites, i.e., bentonites coated with surfactants such as cetyltrimethylammonium (CTAB), are superior and low-cost sorbents for removal of organic contaminants from wastewater. Nonlinear sorption of polar organic compounds such as phenols and anilines by organobentonites were widely observed and interpreted by adsorption mechanism. However, in this study, it was observed that the nonlinear sorption of phenols and anilines by CTAB coated bentonites (CTAB-bentonites) should be attributed to nonlinear partition mechanism with the additional space limitation in CTAB-bentonites for nonlinear partitioning, rather than adsorption mechanism. This nonlinear partition mechanism is supported by that (i) organobentonites is a partition medium, identified by the linear isotherms of polycyclic aromatic hydrocarbons (PAHs) and nitrobenzenes; (ii) sorption coefficients (logK_d), the ratio of adsorbed amount (q_e) to equilibrium concentration (C_e), and Dubinin-Ashtakhov (DA) model fitted sorption capacity (logQ⁰) of organic compounds, by a given CTAB-bentonite, are positively correlated with their octanol-water distribution coefficients (logK_OW) and solubility in octanol (logS_o) respectively; (iii) logK_d and logQ⁰ of a given organic compound by CTAB-bentonites are positively correlated with organic carbon contents (f_oc) of CTAB-bentonites, but not specific surface area. Specific interaction (i.e., hydrogen-bonding interaction), in addition to van der Waals force, is responsible for the nonlinear partitioning of phenols and anilines into CTAB-bentonites, because of the positively linear relationship between DA model fitted sorption affinity (E) and hydrogen-bonding donor parameter (α_m) of organic compounds. These results could help the recognizing of the nonlinear sorption behaviors of organic compounds by organobentonites and promote their environmental applications in wastewater treatment.

Biogenesis of Prism-Like Silver Oxide Nanoparticles Using Nappa Cabbage Extract and Their p-Nitrophenol Sensing Activity

The present study aimed to explore the eco-friendly synthesis of prism-like silver oxide nanoparticles (Ag₂ONPs) from nappa cabbage extract and its p-nitrophenol sensing activity. The prepared Ag₂ONPs were characterized by X-ray diffraction (XRD), field-emission scanning spectroscopy (FESEM), energy-dispersive spectroscopy (EDS), transmission electron microscopy (TEM), and ultraviolet (UV)-visible light spectral analysis (UV-Vis). p-Nitrophenol sensing properties of the prepared nanoparticles were also determined using a simple I-V method. The results showed that the as-prepared Ag₂ONPs have a face-centered cubic (fcc) crystalline nature and a prism-like morphology with particle size in the range 21.61-92.26 nm. The result also showed a high intensity of the (111) facet, making the Ag₂ONP-carbon black/nickel foam electrode (Ag₂ONP-C/NFE) exhibit a high-performance response to p-nitrophenol spanning a wide range of concentrations from 1.0 mM to 0.1 pM and a response time of around 5 s, indicating a high potential for water treatment applications.

Ecotoxicity of nano-metal oxides: A case study on daphnia magna

In Europe REACH framework directive imposes data acquisition concerning toxicity on acquatic species before the commercialization of chemicals to assess environmental risks. According to official methods, exposure tests are performed under in vitro and standardized conditions: OECD's guideline rules external variables such as water type, feeding conditions, and exposure time. As consequence, such obtained results could be different from effects observed in natural environments. This study collects effects within 24-96 h of exposure to nano metal-oxides (ZnO, TiO₂) on D. magna obtained by the exposure under standard OECD conditions comparing them with results obtained by the exposure under more similar conditions to natural environment (i.e. mixture, feeding). High doses exposure determines gas-bubble disease. Animals exposed to LC10 actively ingest nanoparticles under both fasting and feeding conditions. Furthermore, body burial by a coat of nanoparticles thicker in mixtures than in single dispersions was recorded. Furthermore, results show that: (i) effects increase over time; (ii) n-ZnO results less effective than n-TiO₂ in both single dispersion, and mixture; (iii) the presence of surfactant increases toxicity of nanoparticles; (iv) immobilization is a more sensitive endpoint than mortality; (v) feeding increases test sensitiveness improving differences among treated and controls till 96 h and allowing longer exposure times than standard OECD test. As general remark, this study provides evidence that in vitro ecotoxicological results obtained under standardized OECD conditions could be significant different to animals' responses under natural (feeding and mixtures) exposure conditions.

Recent advances in the application of silica nanostructures for highly improved water treatment: a review

The demand for high-quality safe and clean water supply has revolutionized water treatment technologies and become a most focused subject of environmental science. Water contamination generally marks the presence of numerous toxic and harmful substances. These contaminants such as heavy metals, organic and inorganic pollutants, oil wastes, and chemical dyes are discharged from various industrial effluents and domestic wastes. Among several water treatment technologies, the utilization of silica nanostructures has received considerable attention due to their stability, sustainability, and cost-effective properties. As such, this review outlines the latest innovative approaches for synthesis and application of silica nanostructures in water treatment, apart from exploring the gaps that limit their large-scale industrial application. In addition, future challenges for improved water remediation and water quality technologies are keenly discussed.

Adsorptive removal of p-nitrophenol from water with mechano-synthesized porous organic polymers

An environmentally friendly synthesis of porous organic polymers for removing organic pollutants from water.

Recent advances in nanomaterials for water protection and monitoring

Nanomaterials (NMs) for adsorption, catalysis, separation, and disinfection are scrutinized. NMs-based sensor technologies and environmental transformations of NMs are highlighted.

Sorption of polychlorinated biphenyls onto biochars derived from corn straw and the effect of propranolol

The sorption of three polychlorinated biphenyls (PCBs) in single-solute and bi-solute systems in the presence of propranolol was studied on biochars at pyrolyzing temperatures of 200°C (BC200) and 700°C (BC700). Hydrophobicity and molecular planarity played a major role in PCB sorption onto BC200 and BC700, respectively. The steric hindrance caused by non-planarity made the strong specific sorption sites on BC700 less accessible to nonplanar PCBs. In bi-solute systems for BC200, propranolol monomers at an initial concentration (Cinit) of 0.8mg/L inhibited the sorption of PCB4 by competing for sorption sites. Propranolol at Cinit larger than 1.2mg/L could form hemimicelle structures on the biochar surface, providing a favorable phase for PCB4 partitioning, thereby increasing Koc up to 1.15 times. For BC700, propranolol prohibited PCB4 sorption mainly by pore-blocking, with the log Koc being reduced from 4.92 to 3.94. This study informs the application of biochar in mixture-contaminated environment.

Enhanced adsorptive removal of p-nitrophenol from water by aluminum metal-organic framework/reduced graphene oxide composite

In this study, the composite of aluminum metal–organic framework MIL-68(Al) and reduced graphene oxide (MA/RG) was synthesized via a one–step solvothermal method, and their performances for p–nitrophenol (PNP) adsorption from aqueous solution were systematically investigated. The introduction of reduced graphene oxide (RG) into MIL-68(Al) (MA) significantly changes the morphologies of the MA and increases the surface area. The MA/RG-15% prepared at RG-to-MA mass ratio of 15% shows a PNP uptake rate 64% and 123% higher than MIL-68(Al) and reduced graphene oxide (RG), respectively. The hydrogen bond and π – π dispersion were considered to be the major driving force for the spontaneous and endothermic adsorption process for PNP removal. The adsorption kinetics, which was controlled by film–diffusion and intra–particle diffusion, was greatly influenced by solution pH, ionic strength, temperature and initial PNP concentration. The adsorption kinetics and isotherms can be well delineated using pseudo–second–order and Langmuir equations, respectively. The presence of phenol or isomeric nitrophenols in the solution had minimal influence on PNP adsorption by reusable MA/RG composite.

Adsorptive/photo-catalytic process for naphthalene removal from aqueous media using in-situ nickel doped titanium nanocomposite

The present study investigates the synthesis and characterization of in-situ nickel doped titanium nanocomposite (TiO2/NiO) use as an adsorbent and a photo-catalyst for naphthalene removal from aqueous phase. Nickel-titanium nanocomposites were synthesized by using an in-situ process for the nickel doping and further calcined at 600 °C for 6 h to produce the desired TiO2/NiO nanocomposite, which was then characterized by X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD) and UV-Vis analysis before and after naphthalene removal. The removal of naphthalene was explored with effect of pH, time and initial concentration of naphthalene (2-25 mg/L) in the presence of dark and light phases. Naphthalene removal tests were conducted under both batch and continuous flow conditions. A special column without any channeling problem was successfully designed for the removal of naphthalene by continuous flow process in the presence of visible light source. The removal was maximized at pH 6.5. The maximum amount of naphthalene removed by TiO2/NiO(0.1) nanocomposite in the presence of visible light phase was 322.1 mg/g, which was 2.5 times greater than that of the parent TiO2. The removal of naphthalene obtained during the breakthrough analysis was consistent with the batch equilibrium data.

Effect of model dissolved organic matter coating on sorption of phenanthrene by TiO2 nanoparticles

Dissolved organic matter (DOM) may alter the sorption of hydrophobic organic contaminants (HOC) to metal oxide nanoparticles (NPs), but the role of DOM and NP types is poorly understood. Here, phenanthrene sorption was quantified on four types of nano-TiO2 (three rutile, one anatase), and a bulk, raw TiO2 powder. Prior to the sorption experiments, these nanoparticles were coated using four different organic materials: Lignin (LIG), tannic acid (TAN), Congo red (CON), and capsorubin (CAP). Lignin, tannic acid, congo red and capsorubin coating substantially enhanced phenanthrene sorption to various TiO2 particles. After coating with a specific DOM, Kd values by the DOM-coated TiO2 particles on percent organic carbon content and surface area (SA) basis (Koc/SA) generally followed the order: TiO2 NPs with hydrophobic surfaces > bulk TiO2 particles > other TiO2 NPs. Different Koc/SA values of various DOM-TiO2 complexes resulted from distinct conformation of the coated DOM and aggregation.

Adsorption of phenanthrene on multilayer graphene as affected by surfactant and exfoliation

Surfactant mediated exfoliation of multilayer graphene and its effects on phenanthrene adsorption were investigated using a passive dosing technique. In the absence of surfactant (sodium cholate, NaC), multilayer graphene had higher adsorption capacity for phenanthrene than carbon nanotube and graphite due to the higher surface area and micropore volume. The observed desorption hysteresis is likely caused by the formation of closed interstitial spaces through folding and rearrangement of graphene sheets. In the presence of NaC (both 100 and 8000 mg/L), phenanthrene adsorption on graphene was decreased due to the direct competition of NaC molecules on the graphene surface. With the aid of sonication, multilayer graphene sheets were exfoliated by NaC, leading to better dispersion. The degree of dispersion depended on the graphene-NaC ratio in aqueous solution rather than critical micelle concentration of NaC, and the good dispersion occurred after reaching adsorption saturation of NaC molecules on graphene sheets. In addition, exfoliation weakened the competition between phenanthrene and NaC and enhanced the adsorption capacity of graphene for phenanthrene due to exposed new sites. The findings on exfoliation of graphene sheets and related adsorption properties highlight not only the potential applications of multilayer graphene as efficient adsorbent but also its possible environmental risk.