Bisphenol diglycidyl ethers and bisphenol A and their hydrolysis in drinking water

Exposure to endocrine disrupting chemicals from beverage packaging materials and risk assessment for consumers

This study investigated the influence of beverage packaging materials on the presence of endocrine disrupting chemicals (EDCs) in plastic, glass, carton, aluminium, and tin canned non-alcoholic beverages. Results showed that 63 EDCs including perfluoroalkyl and polyfluoroalkyl substances (PFAS), bisphenols, parabens, benzophenone-type UV-filters, biocides, nitrophenols, and alkylphenols, were detected in 144/162 screened products. Detected ∑63EDC concentrations ranged from 1.3 to 19,600 ng/L. EDC concentrations were higher in beverages packaged in metal cans while lower or no levels were detected in glass, plastic, and carton packaged drinks. Bisphenol levels were higher on average in canned beverages compared to glass (p < 0.01) and plastic products (p < 0.05) produced by the same brand and manufacturer. Two structural isomers of bisphenol A (BPA) were identified in 19 beverages, constituting the first detection in foodstuffs. The calculated daily intake of detected EDCs showed that exposure to BPA from per capita beverage consumption of 364 mL/day are up to 2000-fold higher than the newly revised safety guideline for BPA recommended by the EFSA (European Food Safety Authority). Overall, these findings suggest that BPA exposure poses a potential health hazard for individuals who regularly consume non-alcoholic beverages packaged in aluminium or tin cans, particularly young children.

Global landfill leachate characteristics: Occurrences and abundances of environmental contaminants and the microbiome

Landfill leachates are complex mixtures containing very high concentrations of biodegradable and recalcitrant toxic compounds. Understanding the major contaminant components and microbial community signatures in global landfill leachates is crucial for timely decision-making regarding contaminant management and treatment. Therefore, this study analyzed leachate data from 318 landfill sites primarily used for municipal solid waste disposal, focusing on their chemical and microbiological characteristics. The most prevalent and dominant components in landfill leachates are the chemical oxygen demand (COD, 3.7-75.9 × 103 mg/L) and NH4+ (0.03-0.81 × 104 mg/L), followed by salt species such as SO42- (0.03-5.25 × 103 mg/L), Cl- (3.2-7.8 × 103 mg/L), K+ (0.58-4.20 × 103 mg/L), Na+ (1.3-13.0 × 103 mg/L) and Ca2+ (2.35-230.23 × 103 mg/L), which exhibit significant fluctuations. Heavy metals and metalloids are widely distributed in most landfill leachates but at relatively low concentrations (<182.8 mg/L) compared to conventional parameters. Importantly, there is a distinct global variation in the occurrence of emerging environmental contaminants (ECs). Among these compounds, perfluorooctanoic acid (PFOA, 0.02-7.50 × 103 μg/L) of per- and poly-fluoroalkyl substances (PFAS), bisphenol A (BPA, 0.01-33.46 × 103 μg/L) belonged to endocrine-disrupting compounds (EDCs), together with di-ethyltoluamide (DEET, 1.0-1.0 × 103 μg/L) affiliated to pharmaceuticals and personal care products (PPCPs) are the most frequently detected in landfill leachates. Additionally, the microbial community compositions in most leachates are primarily dominated by Proteobacteria, Bacteroidota, Firmicutes, and Chloroflexi, and some of their abundances are correlated with the concentrations of NH4+, NO3-, Cl-, Na+ and Cr. Notably, the leading microbes driving advanced removal of inorganic nitrogen in the treatment systems are Candidatus Brocadia (anammox), denitrifying Thauera, nitrite-oxidizing bacteria Nitrospira, along with ammonia-oxidizing bacteria Nitrosomonas and Nitrosospira. The findings of this work provide a deeper insight into the leachate characteristics and the sustainable management of landfill leachates, especially presenting a snapshot of the global distribution of pollutants and also the microbiome.

Broad-Spectrum Antibody-Based Immunochromatographic Strip Assay for Rapid Screening of Bisphenol A Diglycidyl Ether and Its Derivatives in Canned Foods

Bisphenol A diglycidyl ether (BADGE) is widely present in the inner coating of metal food cans, from which it can migrate into food and generate harmful derivatives during storage, such as bisphenol A (2,3-dihydroxypropyl) glycidyl ether, bisphenol A (3-chloro-2-hydroxypropyl) glycidyl ether, and bisphenol A (3-chloro-2-hydroxypropyl) (2,3-dihydroxypropyl) glycidyl ether. Here, a gold-nanoparticle-based immunochromatographic strip assay based on a broad-spectrum polyclonal antibody was developed for the simultaneous detection of BADGE and its derivatives, which could be accomplished within 15 min. The quantitative analysis of the visualization results was performed using Adobe Photoshop CC 2021, and the detection limit, defined as the concentration causing 15% inhibition, was 0.97 ng/mL. The recoveries of BADGE and its derivatives at various spiking levels in canned food samples ranged from 79.86% to 93.81%. The detection results of the proposed immunochromatographic strip assay were validated via high-performance liquid chromatography, showing a good correlation coefficient (R2 = 0.9580).

Direct degradation of Bisphenol A from aqueous solution by active red mud in aerobic environment

As industrial waste from aluminum production, red mud (RM) poses a severe threat to the local environment that needs to be appropriately utilized. The activation of iron oxide, which is abundant in RM, improves its effectiveness as a catalytic material for the degradation of organic pollutants. This study developed a novel activation approach by adding dithionite citrate bicarbonate (DCB) for Bisphenol A (BPA) degradation under aeration conditions. Electrochemical experiments and reactive oxygen species (ROSs) trapping experiments showed that DCB treatment enhanced the redox cycle of Fe(II)/Fe(III), which promoted free radical generation. The optimized condition for the RM activation was achieved at 21 mmol/L dithionites, 84 mmol/L citrates, and 34 mmol/L bicarbonate, and the degradation of BPA by activated RM reached 410 µg BPA per gram of RM. This work provided a feasible way to utilize RM resources as an efficient, low-cost catalyst for organic pollutants treatment.

Emerging contaminants migration from pipes used in drinking water distribution systems: a review of the scientific literature

Migration of emerging contaminants (ECs) from pipes into water is a global concern due to potential human health effects. Nevertheless, a review of migration ECs from pipes into water distribution systems is presently lacking. This paper reviews, the reported occurrence migration of ECs from pipes into water distribution systems in the world. Furthermore, the results related to ECs migration from pipes into water distribution systems, their probable sources, and their hazards are discussed. The present manuscript considered the existing reports on migration of five main categories of ECs including microplastics (MPs), bisphenol A (BPA), phthalates, nonylphenol (NP), perfluoroalkyl, and polyfluoroalkyl substances (PFAS) from distribution network into tap water. A focus on tap water in published literature suggests that pipes type used had an important role on levels of ECs migration in water during transport and storage of water. For comparison, tap drinking water in contact with polymer pipes had the highest mean concentrations of reviewed contaminants. Polyvinyl chloride (PVC), polyamide (PA), polypropylene (PP), polyethylene (PE), and polyethylene terephthalate (PET) were the most frequently detected types of microplastics (MPs) in tap water. Based on the risk assessment analysis of ECs, levels of perfluorooctanoic acid (PFOA), perfluorononanoic acid (PFNA), perfluorodecanoic acid (PFDA), perfluorohexane sulfonate (PFHxS), and perfluorooctane sulfonate (PFOS) were above 1, indicating a potential non-carcinogenic health risk to consumers. Finally, there are still scientific gaps on occurrence and migration of ECs from pipes used in distribution systems, and this needs more in-depth studies to evaluate their exposure hazards on human health.

Bisphenol-diglycidyl ethers in paired urine and serum samples from children and adolescents: Partitioning, clearance and exposure assessment

Bisphenol A diglycidyl ether (BADGE), bisphenol F diglycidyl ether (BFDGE), and their derivatives are frequently used in food packaging materials. Some toxicological studies have shown that the endocrine-disrupting activities of these compounds are similar to or higher than those of bisphenol A (BPA), which may also adversely affect the growth and development of children and adolescents. Here, we investigated nine bisphenol-diglycidyl ethers (BDGEs) in 181 paired urine and serum samples from children and adolescents from Beijing to determine their partitioning, clearance and exposure levels. The results showed that nine BDGEs were detected in 181 urine and serum samples from children and adolescents from Beijing. Bisphenol A bis(2,3-dihydroxypropyl) glycidyl ether (BADGE·2H₂O) was the primary pollutant. The daily intake of ∑BDGEs was 15.217 ng/kg bw/day among children and adolescents in Beijing. The ranking of BDGEs in terms of renal clearance rate (CL_renal) in this study population was BADGE > BADGE·2H₂O > BFDGE > bisphenol F bis(3-chloro-2-hydroxypropyl) glycidyl ether (BFDGE·2HCl) > bisphenol A (3-chloro-2-hydroxypropyl) (2,3-dihydroxypropyl) glycidyl ether (BADGE·HCl·H₂O). In addition, the serum and urine ratios (S/U ratios) of BFDGE·2HCl, BADGE·2H₂O, BFDGE, BADGE, and BADGE·HCl·H₂O were higher than 1, indicating that these contaminants have a higher enrichment capacity in human blood. To our knowledge, this is the first study on the partitioning and renal clearance rate of BDGEs in paired urine and serum samples from children and adolescents.

Monitoring of Pollutants Content in Bottled and Tap Drinking Water in Italy

The concentration levels of thirteen organic pollutants and selected heavy metals were investigated in 40 plastics bottled and tap water samples. Some of the selected contaminants have an ascertained or suspected endocrine disrupting activity, such as Bisphenol A (BPA) and its analogs, and Bis 2-ethylhexyl phthalate (DEHP), which are used by industries as plasticizers. The most frequently detected pollutants were Bisphenol AF (BPAF) (detection frequency (DF) = 67.5%, mean 387.21 ng L⁻¹), DEHP (DF = 62.5%, mean 46.19 µg L⁻¹) and BPA (DF = 60.0%, mean 458.57 ng L⁻¹), with higher concentration levels found in tap waters. Furthermore, a possible level of exposure to thirteen pollutants via drinking water intake was calculated. Our findings show that, even though the occurrence of contaminants and heavy metals in drinking waters does not pose an immediate, acute health risk for the population, their levels should be constantly monitored and “hard-wired” into everyday practice. Indeed, the health impact to the continuous and simultaneous intake of a huge variety of xenobiotics from various sources by humans is complex and still not fully understood.

Metabolic profiling of bisphenol A diglycidyl ether in vitro and in vivo

Bisphenol A diglycidyl ethers (BADGE) is one class of human-made chemicals, and it is one of the most widely used raw materials for epoxy resins. As an active compound, BADGE undergoes biotransformation in vitro and in vivo. However, there is a limited understanding of the biotransformation of BADGE and toxicity studies on transformation products. We conducted comprehensive research on the metabolic transformation of BADGE in vitro and in vivo. The results showed that 12 metabolites and 7 metabolites were identified in vitro and in vivo, respectively. Four biotransformation products, including M1 (hydrolysis), M3 (dehydroxylation), M10 (carboxylation), and M11 (glucose conjugation), can be found in both in vitro and in vivo samples. The main metabolic pathways were hydroxylation, carboxylation, cysteine (Cys) conjugation, and glucose conjugation. Besides, our results suggested the existence of metabolic differences in BADGE between species and gender. Further, we investigated toxicities of BADGE metabolites in-silico. Importantly, some hydrolysis (M1, M2), hydroxylation (M7), and oxidation (M8) products showed similar or even higher potential toxicity than BADGE depending on the endpoint. These results enrich the biotransformation profiles of BADGE and provide useful information for understanding its biotransformation in humans and a reference for the comprehensive assessment for human health risk.

Occurrence and seasonal disparity of emerging endocrine disrupting chemicals in a drinking water supply system and associated health risk

Contamination of drinking water with endocrine-disrupting chemicals (EDCs) raises concerns over the security and long-term sustainability of clean water supplies as well as human exposure via daily water intake. In this study, the seasonal disparity and occurrence of six phthalates and bisphenol-A in the drinking water supply system and associated health-risk were examined. The detection frequencies of the ∑6PAEs ranged from 24 to 100% in the winter whereas; in summer it is below the detection limit up to 100%. DEHP was the most prevalent phthalate congener ranging from 1.14 to 8351.85 µg/L (winter) and 0.552 to 410.29 µg/L (summer) surpassing the permissible limit. However, BPA concentrations were found under the permissible limit. The results suggested that PAEs concentration displayed significant seasonal variations with the highest in winter and the lowest in summer. The exposure to PAEs and BPA from drinking water was assessed, indicating a possible health risk to humans with a hazard quotient (HQ) > 1 for DEHP only. The findings necessitate an immediate scrutiny of these EDCs in drinking water supply system and are critical for implementing effective technologies at the WTP scale to ensure the quality and safety of drinking water to ascertain human and environmental health.

A comprehensive review on the analytical method, occurrence, transformation and toxicity of a reactive pollutant: BADGE

Bisphenol A diglycidyl ether (BADGE)-based epoxy resin is one of the most widely used epoxy resins with an annual production amount of several million tons. Compared with all other legacy or emerging organic compounds, BADGE is special due to its toxicity and high reactivity in the environment. More and more studies are available on its analytical methods, occurrence, transformation and toxicity. Here, we provided a comprehensive review of the current BADGE-related studies, with focus on its production, application, available analytical methods, occurrences in the environment and human specimen, abiotic and biotic transformation, as well as the in vitro and in vivo toxicities. The available data show that BADGE and its derivatives are ubiquitous environmental chemicals and often well detected in human specimens. For their analysis, a water-free sample pretreatment should be considered to avoid hydrolysis. Additionally, their complex reactions with endogenous metabolites are areas of great interest. To date, the monitoring and further understanding of their transport and fate in the environment are still quite lacking, comparing with its analogues bisphenol A (BPA) and bisphenol S (BPS). In terms of toxicity, the summary of its current studies and Environmental Protection Agency (EPA) ToxCast toxicity database suggests BADGE might be an endocrine disruptor, though more detailed evidence is still needed to confirm this hypothesis in in vivo animal models. Future study of BADGE should focus on its metabolic transformation, reaction with protein and validation of its role as an endocrine disruptor. We believe that the elucidation of BADGEs can greatly enhance our understandings of those reactive compounds in the environment and human.

The quantification of bisphenols and their analogues in wastewaters and surface water by an improved solid-phase extraction gas chromatography/mass spectrometry method

The study focused on the application of GC in the quantitative analysis of bisphenols and their analogues (12 analytes), and the improvement of solid-phase extraction for the whole water analysis of complex water samples. The role of silylation in the qualitative and quantitative analysis of bisphenols was investigated. Partial degradation occurred for selected targets during hot injection with the presence of a silylation agent. A PSA (primary and secondary amines) sorbent placed on the top of the solid-phase extraction (SPE) column sorbent was found to be a matrix component trap, mostly for humic acids. The whole water analysis was performed by washing the filters with methanol and recycling the extract to the sample. The validation of SPE-GC/MS(SIM) gave limits of detection of 1-50 ng/L for ten target bisphenols with a method recovery of between 87 and 133%. The application of the method was tested by the analysis of wastewater sampled from three wastewater treatment plants located in Poland, and municipal surface waters. The only analytes found were BPA and BPS, within the range of 16-1465 ng/L and < MDL-1249 ng/L in wastewater, and 170-3113 ng/L and < MDL-1584 ng/L in surface water, respectively.

Human phase I in vitro liver metabolism of two bisphenolic diglycidyl ethers BADGE and BFDGE

Root canal sealers are commonly used to endodontically treat teeth with periapical infections. Some root canal sealers based on epoxy resin contain bisphenol A diglycidyl ether (BADGE) and bisphenol F diglycidyl ether (BFDGE). The presence of these chemicals is of concern due to the close contact to the blood stream at the apex and the long setting times of up to 24 h. These chemicals, or any of their degradation products or metabolites, can then exert their toxic effects before being excreted. This study aimed to identify the phase I in vitro biotransformation products of BADGE and BFDGE using human liver microsomes. During incubation with microsomal fractions, the epoxides were rapidly hydrolysed in a NADPH independent manner resulting in the formation of BADGE.2H₂O and BFDGE.2H₂O. Further, oxidative reactions, such as hydroxylation and carboxylation, generated other BADGE metabolites, such as BADGE.2H₂O-OH and BADGE.H₂O.COOH, respectively. For BFDGE, further oxidation of BFDGE.2H₂O led to the newly reported carboxylic acid, BFDGE.H₂O.COOH. In total, three specific metabolites have been identified which can serve in future human biomonitoring studies of BADGE and BFDGE.

Mechanisms of action, chemical characteristics, and model systems of obesogens

There is increasing evidence for the role of environmental endocrine disrupting contaminants, coined obesogens, in exacerbating the rising obesity epidemic. Obesogens can be found in everyday items ranging from pesticides to food packaging. Although research shows that obesogens can have effects on adipocyte size, phenotype, metabolic activity, and hormone levels, much remains unknown about these chemicals. This review will discuss what is currently known about the mechanisms of obesogens, including expression of the PPARs, hormone interference, and inflammation. Strategies for identifying obesogenic chemicals and their mechanisms through chemical characteristics and model systems will also be discussed. Ultimately, research should focus on improving models to discern precise mechanisms of obesogenic action and to test therapeutics targeting these mechanisms.

Stability, biological treatment and UV photolysis of 18 bisphenols under laboratory conditions

The limited knowledge on the stability, removal, and the fate of bisphenol A analogues in the aqueous environment led us to assess the removal by hydrolysis, adsorption, biological treatment and UV photolysis of eighteen common bisphenol compounds (BPs). Hydrolysis of BPs does not occur. The main factor affecting their stability in wastewater samples is storage time, and safe storage conditions were found to be -20 °C or 4 °C for up to four weeks. The results also revealed no significant reduction in the levels of BPs standards when stored in either methanol or ultrapure water. BPE was found to be the most stable, followed by BPF isomers, BPS and BPF, while BP26DM was the least stable and BPM, BPPH, BPP, BPBP and BPFL were quickly adsorbed. For most BPs, the removal efficiency of biological treatment was >85%, and there was no difference between the suspended activated sludge and moving bed bioreactors. Different adsorption affinities of the BPs to biomass were observed and reflect the differences in their K_ow. In terms of degradability, direct UV photolysis in water produced three groups of BPs: (A) highly removable (RE > 94%), (B) moderately removable (RE 50-80%) and (C) poorly removable (RE 25-45%). In nearly all cases degradation followed pseudo-first-order kinetics.

Cultivation of a versatile manganese-oxidizing aerobic granular sludge for removal of organic micropollutants from wastewater

Organic micropollutants (OMPs) are frequently detected in water and wastewater, and have attracted wide attention due to potential adverse effects on ecosystems and human health. In this work, manganese-oxidizing aerobic granular sludge (Mn-AGS) was successfully cultivated and applied to remove OMPs from wastewater. Biogenic manganese (III,IV) oxides (bio-MnO_x) were generated and accumulated to 22.0-28.3 mg Mn/g SS in the final sludge. Neither the addition of allochthonous manganese-oxidizing bacteria (MnOB; Pseudomonas putida MnB1) nor the reduction in hydraulic retention time (HRT) facilitated the cultivation of Mn-AGS. Batch experiments of OMPs degradation indicated that Mn-AGS significantly improved (1.3-3.9 times) degradation rates of most OMPs. Removal rates of bisphenol A (BPA), 17α‑ethinylestradiol (EE2), tetracycline (TC), and chloramphenicol (CAP) were 3.0-12.6 μg/h/g SS by the traditional AGS and 8.0-16.3 μg/h/g SS by Mn-AGS; those of imazethapyr (IM) were relatively high, 64.7 ± 0.1 and 127.8 ± 2.5 μg/h/g SS by AGS and Mn-AGS, respectively. However, degradation of dichlorophenyl phosphine (DCPP) was slower by Mn-AGS than AGS, 9.0 ± 0.4 vs. 21.2 ± 0.9 μg/h/g SS, possibly due to inhibition of microbial activity by bio-MnO_x. This work provides a promising method for treating OMPs in organic wastewater, but the possible inhibition of microbes by bio-MnO_x should be noted.

Bisphenol-A induces neurodegeneration through disturbance of intracellular calcium homeostasis in human embryonic stem cells-derived cortical neurons

Bisphenol-A (BPA) is a representative exogenous endocrine disruptor, which is extensively composed in plastic products. Due to the capability of passing through the blood-brain barrier, evidence has linked BPA exposure with multiple neuropsychological dysfunctions, neurobehavioral disorders and neurodegenerative diseases. However, the underlying mechanism by which BPA induces neurodegeneration still remains unclear. Our study used human embryonic stem cells-derived human cortical neurons (hCNs) as a cellular model to investigate the adverse neurotoxic effects of BPA. hCNs were treated with 0, 0.1, 1 and 10 μM BPA for 14 days. Impacts of BPA exposure on cell morphology, cell viability and neural marker (MAP2) were measured for evaluating the neurodegeneration. The intracellular calcium homeostasis, reactive oxygen species (ROS) generation and organelle functions were also taken into consideration. Results revealed that chronic exposure of BPA damaged the neural morphology, induced neuronal apoptosis and decreased MAP2 expression at the level of both transcription and translation. The intracellular calcium levels were elevated in hCNs after BPA exposure through NMDARs-nNOS-PSD-95 mediating. Meanwhile, BPA led to oxidative stress by raising the ROS generation and attenuating the antioxidant defense in hCNs. Furthermore, BPA triggered ER stress and increased cytochrome c release by impairing the mitochondrial function. Ultimately, BPA triggered the cell apoptosis by regulating Bcl-2 family and caspase-dependent signaling pathway. Taken together, BPA exerted neurotoxic effects on hCNs by eliciting apoptosis, which might due to the intracellular calcium homeostasis perturbation and cell organellar dysfunction.

Stabilities of bisphenol A diglycidyl ether, bisphenol F diglycidyl ether, and their derivatives under controlled conditions analyzed using liquid chromatography coupled with tandem mass spectrometry

Bisphenol A diglycidyl ether (BADGE), bisphenol F diglycydyl ether (BFDGE), and their related compounds are widely used as precursors in production of epoxy resins. The high reactivity of these compounds makes the development of analytical methodologies that ensure appropriate metrological accuracy crucial. Consequently, we aimed to determine whether and to what extent the composition of the solution and storage conditions affect the stability of selected BADGE and BFDGE derivatives. The stabilities of these compounds were studied using liquid chromatography–tandem mass spectrometry with electrospray ionization (HPLC-ESI–MS/MS). The chromatographic method elaborated here has allowed for separation of the analytes in time shorter than 6 min, for both methanol and acetonitrile-based mobile phases. The obtained calibration curves for all analytes were linear in the range tested. The values of limit of detection (LODs) were in the range of 0.91–2.7 ng/mL, while values of limit of quantitation (LOQs) were in the range of 2.7–5.7 ng/mL. The chosen experimental conditions were compared in terms of the content of organic solvent in solution, storage temperature, and time. Our results show that the content of BADGE, BADGE·HCl, BFDGE, three-ring NOGE decreased with increasing water content (> 40% v/v). For BADGE and three-ring NOGE, significant changes in concentration were noted as early as 24 h after the test solutions had been prepared. In addition, a reduction in the storage temperature (4 to − 20 °C) reduced the rate of transformation of the monitored analytes. Our study will increase quality control in future research and may increase the reliability of the obtained results.

The occurrence of bisphenol plasticizers in paired dust and urine samples and its association with oxidative stress

Bisphenol A diglycidy ether (BADGE) and its derivatives are epoxy resins and widely used as emerging plasticizers in food packages and material coating. Though known as endocrine disruptors, little information is available on their occurrence, exposure routes and toxicity. Besides, the analysis of BADGE and its derivatives has always been a challenge due to their reactive chemical properties and the background contamination. Therefore, we firstly developed a novel water-free method to analyze BADGE and its derivatives in dust samples together with other two typical plasticizers bisphenol A (BPA) and bisphenol S (BPS). In order to investigate the levels in paired dust and urine samples, 33 paired samples were collected from Singapore. In both dust and urine samples, the predominant compounds were BPA, BADGE-2H₂O and BPS. A significantly positive correlation of BPA levels in paired dust and urine samples was observed in this small-scale study. To tentatively explore the human health effect from exposure to these bisphenol plasticizers, we assessed the correlation between the urinary concentrations of these compounds and oxo-2'-deoxyguanosine (8-OHdG), an oxidative stress biomarker. The result showed that 8-OHdG levels in urine samples was positively correlated with urinary BPA level and body mass index (BMI), suggesting that elevated oxidative stress might be associated with BPA exposure and obesity. In the future, a larger scale study is warranted due to the limited sample size in this study.

Determination of Nine Bisphenol-Diglycidyl Ethers in Human Breast Milk by Ultrahigh-Performance Liquid Chromatography Tandem Mass Spectrometry

Because of their widespread use, and the mutagenicity and teratogenicity observed in in vitro studies, bisphenol-diglycidyl ethers (BDGEs) were suspected of posing health risks to humans, especially to infants. Quantifying exposure of BDGEs from breast milk is essential in assessing the potential health risks of these ubiquitous compounds to infants. However, there is no reported analytical method for the determination of BDGEs in breast milk. In this context, we developed a rapid and sensitive method based on ultrahigh-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) to measure nine BDGEs in breast milk. The analytes were extracted with acetonitrile and fat was removed by freezing under -20 °C. The extracts were further purified by PRiME HLB solid-phase extraction (SPE) cartridge. The limits of detection (LODs) and quantification (LOQs) for the analytes were 0.033-0.500 and 0.100-1.500 μg L^-1, respectively. The recoveries of BDGEs were ranged from 71.33% to 114.33%. Good method reproducibility regarding intra- and interday precision was observed, yielding relative standard deviations (RSDs) less than 11.81% and 10.83%, respectively. The proposed method was successfully applied to 20 breast milk samples. BADGE·2H₂O, BADGE·HCl·H₂O, BADGE·H₂O, BADGE·HCl, BFDGE·2H₂O, and BFDGE·2HCl were detected. BFDGE·2HCl was the dominant BDGE with detection rate of 65.0% and the concentration ranging from 0.4 to 1.0 μg L^-1. This is the first report describing the occurrence of BDGEs in breast milk.

Application of electrochemical advanced oxidation to bisphenol A degradation in water. Effect of sulfate and chloride ions

Electrochemical oxidation with electrogenerated H₂O₂ (EO- H₂O₂), electro-Fenton (EF), photoelectro-Fenton (PEF) and solar PEF (SPEF) have been applied to mineralize bisphenol A solutions in 0.050 M Na₂SO₄ or 0.008 M NaCl + 0.047 M Na₂SO₄ at pH 3.0. The assays were performed in an undivided cell with a boron-doped diamond (BDD) anode and an air-diffusion cathode for continuous H₂O₂ production. The PEF and SPEF processes yielded almost total mineralization due to the potent synergistic action of generated hydroxyl radicals and active chlorine, in conjunction with the photolytic action of UV radiation. The higher intensity of UV rays from sunlight explained the superior oxidation ability of SPEF. The effect of applied current density was studied in all treatments, whereas the role of bisphenol A concentration was examined in PEF. Bisphenol A abatement followed a pseudo-first-order kinetics, which was very quick in SPEF since UV light favored a large production of hydroxyl radicals from Fenton's reaction. Eight non-chlorinated and six chlorinated aromatics were identified as primary products in the chloride matrix. Ketomalonic, tartronic, maleic and oxalic acids were detected as final short-chain aliphatic carboxylic acids. The large stability of Fe(III)-oxalate complexes in EF compared to their fast photomineralization in PEF and PEF accounted for by the superior oxidation power of the latter processes.

Estrogenicity of halogenated bisphenol A: in vitro and in silico investigations

The binding interactions of bisphenol A (BPA) and its halogenated derivatives (halogenated BPAs) to human estrogen receptor α ligand binding domain (hERα-LBD) was investigated using a combined in vitro and in silico approach. First, the recombinant hERα-LBD was prepared as a soluble protein in Escherichia coli BL21(DE3)pLysS. A native fluorescent phytoestrogen, coumestrol, was employed as tracer for the fluorescence polarization assay. The results of the in vitro binding assay showed that bisphenol compounds could bind to hERα-LBD as the affinity ligands. All the tested halogenated BPAs exhibited weaker receptor binding than BPA, which might be explained by the steric effect of substituents. Molecular docking studies elucidated that the halogenated BPAs adopted different conformations in the flexible hydrophobic ligand binding pocket (LBP), which is mainly dependent on their distinct halogenation patterns. The compounds with halogen substituents on the phenolic rings and on the bridging alkyl moiety acted as agonists and antagonists for hERα, respectively. Interestingly, all the compounds in the agonist conformation of hERα formed a hydrogen bond with His524, while the compounds in the antagonist conformation formed a hydrogen bond with Thr347. These docking results suggested a pivotal role of His524/Thr347 in maintaining the hERα structure in the biologically active agonist/antagonist conformation. Comparison of the calculated binding energies vs. experimental binding affinities yielded a good correlation, which might be applicable for the structure-based design of novel bisphenol compounds with reduced toxicities and for environmental risk assessment. In addition, based on hERα-LBD as a recognition element, the proposed fluorescence polarization assay may offer an alternative to chromatographic techniques for the multi-residue determination of bisphenol compounds.

Occurrence of nonylphenol and bisphenol A in household water pipes made of different materials

We assessed the occurrence of nonylphenol (NP) and bisphenol A (BPA) in tap water supplied through polyvinyl chloride (PVC), stainless steel, and galvanized pipes. Water samples were collected from selected households in Taipei and Kaohsiung (Northern and Southern Taiwan, respectively) in different seasons to elucidate the effects of pipeline materials and ambient temperatures on NP and BPA concentrations in tap water. We detected higher concentrations of NP in tap water from households using PVC pipes (64-195 ng/L) than from those using stainless steel pipes (17-44 ng/L) and galvanized pipes (27-96 ng/L). To verify that water can absorb NP and BPA from PVC pipes, we sealed Milli-Q and tap water in PVC and stainless steel pipes to assess the potential release of NP and BPA from the pipes into the water. Both NP and BPA concentrations initially increased with contact time in the PVC pipes, and the concentration profiles during the retention appeared to be more strongly affected by ambient temperatures. Concentration variations in the stainless steel pipes were smaller than those in the PVC pipes.

Chlorination and chloramination of bisphenol A, bisphenol F, and bisphenol A diglycidyl ether in drinking water

Bisphenol A (BPA), bisphenol F (BPF), and bisphenol A diglycidyl ether (BADGE) are common components of epoxy coatings used in food packaging and in drinking water distribution systems. Thus, leachates from the epoxy may be exposed to the disinfectants free chlorine (Cl2/HOCl/OCl(-)) and monochloramine (MCA, NH2Cl). Bisphenols are known endocrine disrupting chemicals (EDC) with estrogenic activity. Chlorination by-products have the potential to have reduced or enhanced estrogenic qualities, and are, therefore, of interest. In this work, chlorination reactions for bisphenols and BADGE were explored (via LC/MS/MS) and kinetic modeling (using a pseudo-first order approach) was conducted to predict the fate of these compounds in drinking water. The half-lives of BPA and BPF with 1 mg/L of free chlorine ranged from 3 to 35 min over the pH range from 6 to 11 and the temperature range of 10-25 °C. Half-lives for reactions of BPA and BPF with a nominal MCA concentration of 3.5 mg/L as Cl2 were from 1 to 10 days and were greater at higher pH and lower temperature. Formation of chlorinated bisphenol A by-products was observed during the kinetic studies. BADGE was found unreactive with either oxidant.

Occurrence of Bisphenol A Diglycidyl Ethers (BADGEs) and Novolac Glycidyl Ethers (NOGEs) in Archived Biosolids from the U.S. EPA's Targeted National Sewage Sludge Survey

Epoxy resins incorporating bisphenol A diglycidyl ether (BADGE) and novolac glycidyl ether (NOGE) are used in a wide range of applications, including adhesives, structural and electrical laminates. However, little is known about the occurrence of BADGE, NOGE, and their derivatives in the environment. Using liquid chromatography-tandem mass spectrometry, BADGE, bisphenol F glycidyl ether (BFDGE), 3-ring NOGE, and eight of their derivatives (BADGE·2 H2O, BADGE·H2O, BADGE·HCl·H2O, BADGE·2 HCl, BADGE·HCl, BFDGE·2 H2O, and BFDGE·2 HCl) were determined in archived biosolid samples collected from 68 wastewater treatment plants (WWTPs) from the northeastern, midwestern, western, and southern regions of the USA. BADGE·2 H2O was the most frequently detected (DR = 99%) and the most abundant compound found (median: 93.6 ng/g dry weight [dw]) in this family. The highest total concentrations of target chemicals, ranging from 83.6 to 2490 ng/g dw, were found in biosolids collected from the northeastern United States. The sum of geometric mean (GM) concentration of BADGE, NOGE, and their derivatives in biosolids increased with the treatment capacity of WWTPs. Based on the measured concentrations in biosolids and predicted mass in wastewater, it was estimated that approximately 3.5% of the total production of BADGEs was emitted through WWTP discharges.