Decomposition of atrazine traces in water by combination of non-thermal electrical discharge and adsorption on nanofiber membrane

Polymeric membranes functionalized with nanomaterials (MP@NMs): A review of advances in pesticide removal

The excessive contamination of drinking water sources by pesticides has a pernicious impact on human health and the environment since only 0.1% of pesticides is utilized effectively to control the and the rest is deposited in the environment. Filtration by polymeric membranes has become a promising technique to deal with this problem; however, the scientific community, in the need to find better pesticide retention results, has begun to meddle in the functionalization of polymeric membranes. Given the great variety of membrane, polymer, and nanomaterial synthesis methods present in the market, the possibilities of obtaining membranes that adjust to different variables and characteristics related to a certain pesticide are relatively extensive, so it is expected that this technology will represent one of the main pesticide removal strategies in the future. In this direction, this review focused on, - the main characteristics of the nanomaterials and their impact on pristine polymeric membranes; - the removal performance of functionalized membranes; and - the main mechanisms by which membranes can retain pesticides. Based on these insights, the functionalized polymeric membranes can be considered as a promising technology in the removal of pesticides since the removal performance of this technology against pesticide showed a significant increase. Obtaining membranes that adjust to different variables and characteristics related to a certain pesticide are relatively extensive, so it is expected that functionalized membrane technology will represent one of the main pesticide removal strategies in the future.

Advanced oxidation processes for water purification using percarbonate: Insights into oxidation mechanisms, challenges, and enhancing strategies

Percarbonate (SPC) has drawn considerable attention due to its merits in the safety of handling and transport, stability, and price as well as environmental friendliness, which has been extensively applied in advanced oxidation processes (AOPs) for water decontamination. Nevertheless, comprehensive information on the application of SPC-AOPs for the treatment of organic compounds in aquatic media is scarce. Hence, the focus of this review is to shed light on the mechanisms of reactive oxygen species (ROS) evolution in typical SPC-AOPs (i.e., Fenton-like oxidation, photo-assisted oxidation, and discharge plasma-involved oxidation processes). These SPC-AOPs enable the formation of multiple reactive species like hydroxyl radical (^•OH), superoxide radical (O₂^•-), singlet oxygen (¹O₂), carbonate radicals (CO₃^•-), and peroxymonocarbonate (HCO₄^-), which together or solely contribute to the degradation of target pollutants. Simultaneously, the potential challenges in practical applications of SPC-AOPs are systematically discussed, which include the influence of water quality parameters, cost-effectiveness, available active sites, feasible activation approaches, and ecotoxicity. Subsequently, enhancing strategies to improve the feasibility of SPC-AOPs in the practical implementation are tentatively proposed, which can be achieved by introducing reducing and chelating agents, developing novel activation approaches, designing multiple integrated oxidation processes, as well as alleviating the toxicity after SPC-AOPs treatment. Accordingly, future perspectives and research gaps in SPC-AOPs are elucidated. This review will hopefully offer valuable viewpoints and promote the future development of SPC-AOPs for actual water purification.

Degradation of Residual Herbicide Atrazine in Agri-Food and Washing Water

Atrazine, an herbicide used to control grassy and broadleaf weed, has become an essential part of agricultural crop protection tools. It is widely sprayed on corn, sorghum and sugar cane, with the attendant problems of its residues in agri-food and washing water. If ingested into humans, this residual atrazine can cause reproductive harm, developmental toxicity and carcinogenicity. It is therefore important to find clean and economical degradation processes for atrazine. In recent years, many physical, chemical and biological methods have been proposed to remove atrazine from the aquatic environment. This review introduces the research works of atrazine degradation in aqueous solutions by method classification. These methods are then compared by their advantages, disadvantages, and different degradation pathways of atrazine. Moreover, the existing toxicological experimental data for atrazine and its metabolites are summarized. Finally, the review concludes with directions for future research and major challenges to be addressed.

Pathways of organic micropollutants degradation in atmospheric pressure plasma processing - A review

Concern of toxic compounds and their, potentially more harmful degradation products, present in aquatic environment alarmed scientific community and research on the development of novel technologies for wastewater treatment had become of great interest. Up to this date, many papers pointed out the challenges and limitations of conventional wastewater treatment and of some advanced oxidation processes. Advanced technologies based on the use of non-equilibrium or non-thermal plasma had been recognized as a possible solution for, not only degradation, but for complete removal of recalcitrant organic micropollutants. While previous review papers have been focused on plasma physics and chemistry of different types of discharges for few organic micropollutants, this paper brings comprehensive review of current knowledge on the chemistry and degradation pathways by using different non-thermal plasma types for several micropollutants' classes, such as pharmaceuticals, perfluorinated compounds, pesticides, phenols and dyes and points out some major research gaps.

A comprehensive review on preparation, functionalization and recent applications of nanofiber membranes in wastewater treatment

The direct discharge of significant amounts of polluted water into water bodies causes adverse ecological and human health effects. This severe deterioration in water quality creates significant challenges to meet the growing demand for clean water. Therefore, the world urgently needs environmentally friendly advanced technology to overcome this global crisis. In this regard, nanofiber-based membrane filtration is a promising technique in wastewater remediation because of their huge surface area, extremely porous structure, amenable pore size/pore size distribution, variety of material choices, and flexibility to modification with other functional materials. However, despite their unique properties, fouling, poor mechanical properties, shrinkage, and deformation are major drawbacks of nanofiber membranes for treating wastewater. This review presents a comprehensive overview of nanofiber membranes' fabrication and function in water purification applications as well as providing novel approaches to overcoming/alleviating the mentioned disadvantages. The review first presents nanofiber membrane preparation methods, focusing on electrospinning as a versatile and viable technique alongside discussing the parameters controlling nanofiber morphology. Afterward, the functionalization of nanofiber membranes by combining them with other nanomaterials, such as metal and metal-oxide nanoparticles, carbon nanotubes, metal-organic frameworks, and biomolecules, were demonstrated and discussed. In addition, nanofiber membranes functionalized with microorganisms were highlighted. Finally, we introduced and discussed in detail the most relevant and recent advances in nanofiber applications in wastewater treatment in the context of removing different pollutants (e.g., heavy metals, nutrients, radioactive elements, pharmaceuticals, and personal care products, dyes, and pesticides). Moreover, the promising antimicrobial ability of nanofiber membranes in removing microorganisms from wastewater has been fully underscored. We believe this comprehensive review could provide researchers with preliminary data and guide both researchers and producers engaged in the nanofiber membrane industry, letting them focus on the research gaps in wastewater treatment.

Degradation and mechanism analysis of chloroxylenol in aqueous solution by gas-liquid discharge plasma combined with ozonation

Gas-liquid discharge non-thermal plasma (NTP) coupled with an ozonation reactor was used to investigate the removal of a broad-spectrum antibacterial agent, chloroxylenol (PCMX), from aqueous solution. Under the same experimental conditions (discharge power of 50.25 W, the initial concentration of PCMX of 60 mg L-1, oxygen flow of 1.0 L min-1 and PCMX solution flow of 150 mL min-1), the PCMX degradation rates in the ozonation-only, NTP-only and NTP/O3 systems were 29.25%, 67.04% and 79.43%, respectively. Correspondingly, the energy efficiency has also been greatly improved, and increased to 0.45, 1.03 and 1.21 g kW-1 h-1. In addition, the effects of the initial concentration of PCMX, initial pH, the flow rate of oxygen, the addition of H2O2 and the addition of a radical scavenger on the degradation rate of PCMX were investigated in the NTP/O3 system. The degradation rate in acidic solutions was higher than that in alkaline solutions. During the removal process of PCMX, the rate of degradation was strongly increased with the addition of H2O2 and acutely decreased with the addition of the radical scavenger. Compared with deionized water the degradation rates of PCMX in secondary effluent were inhibited. Four main intermediates of PCMX degradation by the NTP/O3 system were identified by gas chromatography-mass spectrometry (GC-MS) and a possible degradation pathway of PCMX was proposed. The changes in toxicity of the PCMX solution during the NTP/O3 system oxidation process were also evaluated using bioluminescent bacteria and Quantitative Structure Activity Relationship (QSAR) models with the help of the ECOSAR software.

Removal of Pharmaceutical Residues from Water and Wastewater Using Dielectric Barrier Discharge Methods-A Review

Persistent pharmaceutical pollutants (PPPs) have been identified as potential endocrine disruptors that mimic growth hormones when consumed at nanogram per litre to microgram per litre concentrations. Their occurrence in potable water remains a great threat to human health. Different conventional technologies developed for their removal from wastewater have failed to achieve complete mineralisation. Advanced oxidation technologies such as dielectric barrier discharges (DBDs) based on free radical mechanisms have been identified to completely decompose PPPs. Due to the existence of pharmaceuticals as mixtures in wastewater and the recalcitrance of their degradation intermediate by-products, no single advanced oxidation technology has been able to eliminate pharmaceutical xenobiotics. This review paper provides an update on the sources, occurrence, and types of pharmaceuticals in wastewater by emphasising different DBD configurations previously and currently utilised for pharmaceuticals degradation under different experimental conditions. The performance of the DBD geometries was evaluated considering various factors including treatment time, initial concentration, half-life time, degradation efficiency and the energy yield (G50) required to degrade half of the pollutant concentration. The review showed that the efficacy of the DBD systems on the removal of pharmaceutical compounds depends not only on these parameters but also on the nature/type of the pollutant.

Effects of atrazine and its two major derivatives on the photosynthetic physiology and carbon sequestration potential of a marine diatom

As one of the most commonly used and frequently detected herbicides in the coastal seawater, the ecotoxicity of atrazine to phytoplankton has been well demonstrated. However, little attention has been paid to the ecotoxicity of its two major hydrolysates (desisopropylatrazine (DIA) and desethylatrazine (DEA)), which are also widely distributed in natural seawater. Here we present a comprehensive analysis of the photosynthetic physiology and chromophoric dissolved organic matter (CDOM) characteristics of the diatom Phaeodactylum tricornutum Pt-1 (CCMP 2561) under atrazine, DIA and DEA stress, respectively. The results showed that both atrazine and the two derivatives had significant negative effects on the concentration of chlorophyll a, maximum quantum efficiency (Fv/Fm) and relative electron transport rates (rETR) of P. tricornutum Pt-1. Furthermore, the CDOM pattern released by P. tricornutum Pt-1 cells also changed significantly after 7-day exposure. Compared with the control group, the fluorescence intensity (3D-EEM spectra) of protein-like components was obviously lower, while that of the humic acid-like components was higher. The findings of this study indicate that the ecotoxicity of atrazine might have been underestimated in previous investigations: both atrazine and its two major derivatives are not only phototoxic to microalgae but also influence the carbon sequestration potential in the coastal seawater.

Hazardous waste treatment technologies

This is a review of the literature published in 2018 on topics related to hazardous waste management in water, soils, sediments, and air. The review covers treatment technologies applying physical, chemical, and biological principles for contaminated water, soils, sediments, and air. PRACTITIONER POINTS: The management of waters, wastewaters, and soils contaminated by various hazardous chemicals including inorganic (e.g., oxyanions, salts, and heavy metals), organic (e.g., halogenated, pharmaceuticals and personal care products, pesticides, and persistent organic chemicals) was reviewed according to the technology applied, namely, physical, chemical and biological methods. Physical methods for the management of hazardous wastes including adsorption, coagulation (conventional and electrochemical), sand filtration, electrosorption (or CDI), electrodialysis, electrokinetics, membrane (RO, NF, MF), photocatalysis, photoelectrochemical oxidation, sonochemical, non-thermal plasma, supercritical fluid, electrochemical oxidation, and electrochemical reduction processes were reviewed. Chemical methods including ozone-based, hydrogen peroxide-based, persulfate-based, Fenton and Fenton-like, and potassium permanganate processes for the management of hazardous were reviewed. Biological methods such as aerobic, anaerobic, bioreactor, constructed wetlands, soil bioremediation and biofilter processes for the management of hazardous wastes, in mode of consortium and pure culture were reviewed.

Rapid removal of polyacrylamide from wastewater by plasma in the gas-liquid interface

Due to the severe restrictions imposed by legislative frameworks, the removal of polyacrylamide (PAM) rapidly and effectively from produced wastewater in offshore oilfields before discharge is becoming an urgent challenge. In this study, a novel advanced oxidation process based on plasma operated in the gas-liquid interface was used to rapidly decompose PAM, and multiple methods including viscometry, flow field-flow fractionation multi-angle light scattering, UV-visible spectroscopy, and attenuated total reflectance-Fourier transform infrared spectroscopy were used to characterize the changes of PAM. Under a discharge voltage of 25 kV and pH 7.0, the PAM concentration decreased from 100 to 0 mg/L within 20 min and the total organic carbon (TOC) decreased from 49.57 to 1.23 mg/L within 240 min, following zero-order reaction kinetics. Even in the presence of background TOC as high as 152.2 mg/L, complete removal of PAM (100 mg/L) was also achieved within 30 min. The biodegradability of PAM improved following plasma treatment for 120 min. Active species (such as O₃ and H₂O₂) were produced in the plasma. Hydroxyl radical was demonstrated to play an important role in the degradation of PAM due to the inhibitory effect observed after the addition of an ·OH scavenger, Na₂CO₃. Meanwhile, the release of ammonia and nitrate nitrogen confirmed the cleavage of the acylamino group. The results of this study demonstrated that plasma, with its high efficiency and chemical-free features, is a promising technology for the rapid removal of PAM.

Potential Applications of Non-thermal Plasma in Animal Husbandry to Improve Infrastructure

Infrastructure in animal husbandry refers to fundamental facilities and services necessary for better living conditions of animals and its economy to function through better productivity. Mainly, infrastructure can be divided into two categories: hard infrastructure and soft infrastructure. Physical infrastructure, such as buildings, roads, and water supplying systems, belongs to hard infrastructure. Soft infrastructure includes services which are required to maintain economic, health, cultural and social standards of animal husbandry. Therefore, the proper management of infrastructure in animal husbandry is necessary for animal welfare and its economy. Among various technologies to improve the quality of infrastructure, non-thermal plasma (NTP) technology is an effectively applicable technology in different stages of animal husbandry. NTP is mainly helpful in maintaining better health conditions of animals in several ways via decontamination from microorganisms present in air, water, food, instruments and surfaces of animal farming systems. Furthermore, NTP is used in the treatment of waste water, vaccine production, wound healing in animals, odor-free ventilation, and packaging of animal food or animal products. This review summarizes the recent studies of NTP which can be related to the infrastructure in animal husbandry.

Peroxymonosulfate activation by hydroxylamine-drinking water treatment residuals for the degradation of atrazine

Drinking water treatment residuals (WTRs) have been applied in organic pollutants degradation in water by generating reactive oxygen species from peroxymonosulfate (PMS), however, the slow transformation of Fe(III) to Fe(II) may limit its widespread application. Hydroxylamine (HA) was introduced into the system to enhance the degradation efficiency of atrazine (ATZ) and several key reaction parameters (HA concentration, PMS concentration, pH and temperature) were concerned to study their influence on ATZ degradation. The results revealed that ATZ degradation efficiency was enhanced in the HA/WTRs/PMS system. Effects of some basic inorganic ions (Cl^-, SO₄^2- and NO₃^-) and natural organic matter on ATZ degradation were investigated and results showed that both have an inhibitory effect on ATZ removal. In addition to the reduction role, HA can also react directly with PMS to produce free radicals that helpful for ATZ degradation. Sulfate radical and hydroxyl radicals were generated and sulfate radical was identified as primary radicals in the HA/WTRs/PMS system by alcohol quenching experiments. Moreover, the HA/WTRs/PMS system also showed good performance for ATZ degradation in authentic water like surface water and groundwater. Introduction of hydroxylamine into the system may promote organic pollutant degradation and use of WTRs as an iron source for PMS activation provides new ideas for sludge treatment.

Removal of micropollutants from water in a continuous-flow electrical discharge reactor

The emergence of micropollutants into our aquatic resources is regarded as an issue of increasing environmental concern. To protect the aquatic environment against further contamination with micropollutants, treatment with advanced oxidation processes (AOPs) is put forward as a promising technique. In this work, an innovative AOP based on electrical discharges in a continuous-flow pulsed dielectric barrier discharge (DBD) reactor with falling water film over activated carbon textile is examined for its potential application in water treatment. The effect of various operational parameters including feed gas type, gas flow rate, water flow rate and power on removal and energy efficiency has been studied. To this end, a synthetic micropollutant mixture containing five pesticides (atrazine, alachlor, diuron, dichlorvos and pentachlorophenol), two pharmaceuticals (carbamazepine and 1,7-α-ethinylestradiol), and 1 plasticizer (bisphenol A) is used. While working under optimal conditions, energy consumption was situated in the range 2.42-4.25 kW h/m³, which is about two times lower than the economically viable energy cost of AOPs (5 kW h/m³). Hence, the application of non-thermal plasma could be regarded as a promising alternative AOP for (industrial) wastewater remediation.

Removal of alachlor, diuron and isoproturon in water in a falling film dielectric barrier discharge (DBD) reactor combined with adsorption on activated carbon textile: Reaction mechanisms and oxidation by-products

A falling film dielectric barrier discharge (DBD) plasma reactor combined with adsorption on activated carbon textile material was optimized to minimize the formation of hazardous oxidation by-products from the treatment of persistent pesticides (alachlor, diuron and isoproturon) in water. The formation of by-products and the reaction mechanism was investigated by HPLC-TOF-MS. The maximum concentration of each by-product was at least two orders of magnitude below the initial pesticide concentration, during the first 10 min of treatment. After 30 min of treatment, the individual by-product concentrations had decreased to values of at least three orders of magnitude below the initial pesticide concentration. The proposed oxidation pathways revealed five main oxidation steps: dechlorination, dealkylation, hydroxylation, addition of a double-bonded oxygen and nitrification. The latter is one of the main oxidation mechanisms of diuron and isoproturon for air plasma treatment. To our knowledge, this is the first time that the formation of nitrificated intermediates is reported for the plasma treatment of non-phenolic compounds.

Preparation, performances and mechanisms of magnetic Saccharomyces cerevisiae bionanocomposites for atrazine removal

Saccharomyces cerevisiae and nanoparticles of iron oxide (Fe₃O₄) which were linked with chitosan (CS) through epichlorohydrin (ECH) were encapsulated in calcium alginate to prepare a novel type of bionanocomposites. Characterization results showed that the Fe₃O₄-ECH-CS nanoparticles were quasi-spherical with an average diameter of 30 nm to which chitosan was successfully attached through epichlorohydrin. The saturation magnetization value of the nanoparticles was 21.88 emu/g, and ferrous and ferric irons were simultaneously observed in the magnetic nanoparticles. Data of atrazine removal by yeasts showed that both inactivated and live yeasts could decrease the concentration of atrazine effectively. The inactivated yeasts achieved 20% removal rate, which indicated that adsorption by the yeasts also played a role in the removal. Removal efficiency of atrazine was maximized at 88% under 25 °C, pH of 7 and an initial atrazine concentration of 2 mg/L. When the magnetic bionanocomposite was recycled and reused twice, only 12% and 20% drop in removal efficiency was observed at the first time and the second time severally. So, atrazine could be used by the yeasts as the sole carbon source for growth and multiplication, and both adsorption and biodegradation by the bionanocomposite contributed to atrazine removal.

Activation of peroxymonosulfate using drinking water treatment residuals for the degradation of atrazine

Drinking water treatment residuals (WTRs) are safe byproducts of water treatment plants containing iron. This work studies the degradation of atrazine (ATZ) by WTR-catalyzed peroxymonosulfate (PMS) in aqueous solutions. Factors that affect the catalytic performance (the PMS concentration, catalyst dose, initial solution pH, reaction temperature and water matrix species) were investigated. The results show that the catalytic degradation efficiency of ATZ increases with the increase in PMS concentration and temperature, whereas a higher content of WTRs results in lower removal efficiency because of the quenching effect and negative effect of high pH. For an initial solution pH of 3 and 5, 94.1% and 87.4% of ATZ degradation can be achieved within 6h, whereas the value is only 26% for pH of 7. The production of sulfate radicals (SO₄^-) and hydroxyl radicals (OH) was confirmed by classic radical quenching and electron spin resonance (ESR) tests. Based on the GC-MS and LC-MS results, the main degradation pathways of ATZ may contain dealkylation, dechlorination-hydroxylation, and alkyl chain oxidation processes. In addition to the ATZ removal ability, the WTRs/PMS system can simultaneously remove phosphorus. This article provides a new idea for wastewater treatment and usage of WTRs as a resource.

Simultaneous removal of Cr(VI) and acid orange 7 from water solution by dielectric barrier discharge plasma

A feasibility study was conducted for simultaneous removal of hexavalent chromium (Cr(VI)) and azo dye acid orange 7 (AO7) by the dielectric barrier discharge (DBD) plasma. The results showed that there was a synergistic effect between Cr(VI) reduction and AO7 degradation. The presence of Cr(VI) enhanced the degradation efficiency of AO7. Meanwhile, the removal efficiency of Cr(VI) also increased in the presence of AO7. Under acidic conditions (pH = 3.0), the reduction efficiency of Cr(VI) was higher (approximately 94%). However, the presence of Cr(VI) diminished the effect of pH on the AO7 degradation efficiency. By increasing the input voltage from 80 to 120 V, the removal efficiencies of Cr(VI) and AO7 were observably increased from 54% to 88% and 62% to 89%, respectively. Adding organic matters inhibited the degradation of AO7 and promoted the reduction of Cr(VI). The addition of Cu(II), Co(II), Ni(II), Mn(II) and Fe(III) could inhibit the Cr(VI) reduction, but not significantly affect the degradation of AO7. The degradation intermediates of AO7 were identified by LC-MS/MS system and a possible degradation pathway was proposed. This study showed that the DBD plasma can simultaneously remove Cr(VI) and AO7, which provided a new idea for the actual wastewater treatment.

Removal of several pesticides in a falling water film DBD reactor with activated carbon textile: Energy efficiency

Bio-recalcitrant micropollutants are often insufficiently removed by modern wastewater treatment plants to meet the future demands worldwide. Therefore, several advanced oxidation techniques, including cold plasma technology, are being investigated as effective complementary water treatment methods. In order to permit industrial implementation, energy demand of these techniques needs to be minimized. To this end, we have developed an electrical discharge reactor where water treatment by dielectric barrier discharge (DBD) is combined with adsorption on activated carbon textile and additional ozonation. The reactor consists of a DBD plasma chamber, including the adsorptive textile, and an ozonation chamber, where the DBD generated plasma gas is bubbled. In the present paper, this reactor is further characterized and optimized in terms of its energy efficiency for removal of the five pesticides α-HCH, pentachlorobenzene, alachlor, diuron and isoproturon, with initial concentrations ranging between 22 and 430 μg/L. Energy efficiency of the reactor is found to increase significantly when initial micropollutant concentration is decreased, when duty cycle is decreased and when oxygen is used as feed gas as compared to air and argon. Overall reactor performance is improved as well by making it work in single-pass operation, where water is flowing through the system only once. The results are explained with insights found in literature and practical implications are discussed. For the used operational conditions and settings, α-HCH is the most persistent pesticide in the reactor, with a minimal achieved electrical energy per order of 8 kWh/m³, while a most efficient removal of 3 kWh/m³ or lower was reached for the four other pesticides.

Development of adsorptive membranes by confinement of activated biochar into electrospun nanofibers

Adsorptive membranes have many applications in removal of contaminants, such as heavy metals and organic contaminants from water. Recently, increasing concentrations of pharmaceutically active compounds, especially antibiotics, such as chlortetracycline in water and wastewater sources has raised concerns about their potentially adverse impacts on environment and human health. In this study, a series of polyacrylonitrile (PAN)/activated biochar nanofibrous membranes (NFMs) with different loadings of biochar (0-2%, w/w) were fabricated using electrospinning. The morphology and structure of fabricated membranes was investigated by scanning electron microscopy, Fourier transform infrared and thermogravimetric analysis. The results showed that at 1.5% of biochar loading, the surface area reached the maximum value of 12.4 m²/g and beyond this loading value, agglomeration of particles inhibited fine interaction with nanofibrous matrix. Also, the adsorption tests using chlortetracycline showed that, under environmentally relevant concentrations, the fabricated adsorptive NFMs had a potential for removal of these types of emerging contaminants from water and wastewaters.

Structure changes and water filtration properties of electrospun polyamide nanofibre membranes

Nanofibre membranes are studied extensively in water treatment. Inappropriate storage, however, could alter their performance, e.g. regarding water filtration. This shows the need for investigating this effect in more detail so as to offer a solution for long-term behaviour and stability. In this study, polyamide nanofibre membranes were treated under different conditions, simulating the diverse storage conditions and to simulate their use in water filtration systems. Under all these different settings, nanofibre properties (scanning electron microscope pictures, dimensional changes, tensile strength) and water filtration performance (clean water permeability (CWP), bacterial removal) were investigated. The results demonstrate that, as soon as the dimensional change of a membrane is >2%, the CWP, tensile strength and bacterial removal significantly decrease. These dimensional changes occurred when the membrane became dry after it had been in contact with water. As such, it is important to keep the membrane either in dry or in wet conditions to store its unique properties. When heat-treated, the membrane had a higher tensile strength and kept its morphology and characteristics better during storage.

Removal of atrazine in water by combination of activated carbon and dielectric barrier discharge

Efficiency of modern wastewater treatment plants to remove or decompose persistent contaminants in low concentration is often insufficient to meet the demands imposed by governmental laws. Novel, efficient and cheap methods are required to address this global issue. We developed a new type of plasma reactor, in which atrazine decomposition by atmospheric dielectric barrier discharge (DBD) in dry air is combined with micropollutant adsorption on activated carbon textile and with extra bubbling of generated ozone. Investigation of reaction kinetics and by-product analysis shows that increasing input power with a factor 3.5 leads to deeper atrazine oxidation without significantly changing energy yield of atrazine removal. By-products of first and later generations are detected with HPLC-MS analysis in water and adsorbed on the activated carbon textile. Our reactor is compared in energy efficiency with reactors described in literature, showing that combination of plasma discharge with pollutant adsorption and ozone recycling is attractive for future applications of water treatment.