Oxypurinol - A novel marker for wastewater contamination of the aquatic environment

Impacts of COVID-19 and climate change on wastewater-derived substances in urban drinking water: Evidence from gadolinium-based contrast agents in tap water from Berlin, Germany

Anthropogenic gadolinium from MRI contrast agents has been detected in surface waters worldwide. It is released with the treated effluents of wastewater treatment plants, similar to other wastewater-derived substances (WWDS) such as pharmaceuticals and personal care products. We determined concentrations of the rare earth elements in tap water from Berlin, Germany, using an automated preconcentration procedure that is both time- and cost-efficient. Anthropogenic gadolinium concentrations in Berlin's tap water increased on average 30-fold between 2009 and 2021. However, the tap water composition responded quickly to the reduced number of MRI scans during the COVID-19 pandemic, and some districts show a decrease from 2016 to 2021. Since climate change causes groundwater levels to decline in many regions, this needs to be mitigated by artificial groundwater recharge with surface water. This will inevitably lead to an increase in WWDS in potable water, which can be cost-efficiently monitored using anthropogenic gadolinium as tracer.

Enhancing disinfection and microcontaminant removal by coupling LED driven UVC and UVA/photo-Fenton processes in continuous flow reactors

For the first time, the sequential combination of UVC-LED (276 nm) and photo-Fenton/UVA-LED (376 nm) process has been assessed in continuous flow mode for wastewater reclamation according to the new European Regulation for reuse in agricultural irrigation (EU 2020/741). The results show that it is possible to obtain water quality class B (Escherichia coli ≤ 100 CFU/100 mL) by UVC-LED irradiation alone, operating the system with a hydraulic residence time (HRT) of 6.5 min and liquid depth of 5 cm in the case of secondary effluents with low Escherichia coli load (8.102-3.1.103 CFU/100 mL). As for high bacteria concentrations (1.2-4.2.104 CFU/100 mL), HRTs longer than 30 min are required. The bacterial load has not influenced decontamination, removing 18 ± 4 % of microcontaminants. Coupling the UVC (30-min HRT and 5.0 cm liquid depth) and the UVA/photo-Fenton (60-min and 15-cm liquid depth) systems allows 58 ± 4 % of real organic microcontaminants to be removed, in addition to achieving water quality class B.

Emerging organic compounds as markers of the degradation of groundwater qualitative and quantitative equilibrium in a context of rapid urban expansion

With the neo-metamorphosis of the residential landscape worldwide and sluggish sanitation strategies in urban environments, rudimentary on-site sanitation systems remain commonly used, especially in developing countries, despite the risks of groundwater contamination. The effective management of such water resources relies on assessment of the sensitivity of anthropized aquifers to man-made impact, including groundwater behavioural alteration, in terms of both quality and quantity. Associated with tracking of changes in land use, this study proposes an approach involving emerging organic contaminants (EOCs) as indicators of the alteration of groundwater balance due the exposure of shallow aquifers to the risks of infiltration of untreated wastewater from soak pits. This methodology was applied to the shallow aquifer beneath the urban agglomeration of Grand-Sfax (Tunisia). Combined with an updated follow-up of groundwater piezometric fluctuations in relation with inputs from surface contamination sources, the spatialisation of contamination levels by EOCs provided a clear delineation of the most impacted aquifer zones. This approach revealed a significant link between the continuous rise in piezometric levels by contributions from untreated inputs and the accumulation of high levels of contamination in groundwater. The understanding of EOC underground pathways allowed the determination of the fates and processes responsible for the diffusion of contamination throughout the studied aquifer. The ability of groundwater to reflect population life style and the use patterns of such organic molecules was also assessed. Besides revealing the legacy of persistent contamination, this approach involving EOCs as tracers with different levels of persistence provided a spatial observation of the aquifer exposure to continuous contamination processes. This approach made it possible to develop a conceptual presentation of aquifer vulnerability to urban pressures and to predict the effects of subsequent expansion of unplanned urbanisation on groundwater quality.

Semi-Selective Array for the Classification of Purines with Surface Plasmon Resonance Imaging and Deep Learning Data Analysis

In process analytics or environmental monitoring, the real-time recording of the composition of complex samples over a long period of time presents a great challenge. Promising solutions are label-free techniques such as surface plasmon resonance (SPR) spectroscopy. They are, however, often limited due to poor reversibility of analyte binding. In this work, we introduce how SPR imaging in combination with a semi-selective functional surface and smart data analysis can identify small and chemically similar molecules. Our sensor uses individual functional spots made from different ratios of graphene oxide and reduced graphene oxide, which generate a unique signal pattern depending on the analyte due to different binding affinities. These patterns allow four purine bases to be distinguished after classification using a convolutional neural network (CNN) at concentrations as low as 50 μM. The validation and test set classification accuracies were constant across multiple measurements on multiple sensors using a standard CNN, which promises to serve as a future method for developing online sensors in complex mixtures.

Pilot-scale removal of persistent and mobile organic substances in granular activated carbon filters and experimental predictability at lab-scale

Present knowledge about the fate of persistent and mobile (PM) substances in drinking water treatment is limited. Hence, this study assesses the potential of fixed-bed granular activated carbon (GAC) filters to fill the treatment gap for PM substances and the elimination predictability from lab-scale experiments. Two parallel pilot filters (GAC bed height 2 m, diameter 15 cm) with different GAC were operated for 1.5 years (ca. 47,000 BV throughput) alongside rapid small-scale column tests (RSSCT) designed based on the proportional diffusivity (PD) and the constant diffusivity (CD) approaches. Background dissolved organic matter (DOM) and a set of 17 target substances were investigated, among them 2-acrylamido-2-methylpropane sulfonate (AAMPS), adamantan-1-amine (ATA), melamine (MEL) and trifluoromethanesulfonic acid (TFMSA). Nine substances were predominantly present in the drinking water used as pilot filter influent (frequencies of detection above 80 %, median concentrations 0.003-1.868 μg/L) and their breakthrough behaviors could be observed: TFMSA was not retained at all, four substances including AAMPS and ATA reached complete breakthrough below 20,000 BV, three compounds were partially retained until the end of operation and oxypurinol was retained completely. The comparable PM candidate and DOM removal performances of both GAC aligns with their very similar surface characteristics and elemental compositions. The agreement of results between RSSCT with the pilot-scale filters were substance specific and no superior RSSCT design could be identified. However, CD-RSSCT provide a conservative removal prediction for most studied compounds. MEL adsorption was significantly underestimated by both RSSCT designs. Using the criterion of a carbon usage rate (with respect to 50 % breakthrough) below 25 mg_GAC/L_water for an economic retention by fixed-bed GAC filters, five (out of nine) substances met the requirement.

Lagrangian profiles of riverine autotrophy, organic matter transformation, and micropollutants at extreme drought

On their way from inland to the ocean, flowing water bodies, their constituents and their biotic communities are exposed to complex transport and transformation processes. However, detailed process knowledge as revealed by Lagrangian measurements adjusted to travel time is rare in large rivers, in particular at hydrological extremes. To fill this gap, we investigated autotrophic processes, heterotrophic carbon utilization, and micropollutant concentrations applying a Lagrangian sampling design in a 600 km section of the River Elbe (Germany) at historically low discharge. Under base flow conditions, we expect the maximum intensity of instream processes and of point source impacts. Phytoplankton biomass and photosynthesis increased from upstream to downstream sites but maximum chlorophyll concentration was lower than at mean discharge. Concentrations of dissolved macronutrients decreased to almost complete phosphate depletion and low nitrate values. The longitudinal increase of bacterial abundance and production was less pronounced than in wetter years and bacterial community composition changed downstream. Molecular analyses revealed a longitudinal increase of many DOM components due to microbial production, whereas saturated lipid-like DOM, unsaturated aromatics and polyphenols, and some CHOS surfactants declined. In decomposition experiments, DOM components with high O/C ratios and high masses decreased whereas those with low O/C ratios, low masses, and high nitrogen content increased at all sites. Radiocarbon age analyses showed that DOC was relatively old (890-1870 years B.P.), whereas the mineralized fraction was much younger suggesting predominant oxidation of algal lysis products and exudates particularly at downstream sites. Micropollutants determining toxicity for algae (terbuthylazine, terbutryn, isoproturon and lenacil), hexachlorocyclohexanes and DDTs showed higher concentrations from the middle towards the downstream part but calculated toxicity was not negatively correlated to phytoplankton. Overall, autotrophic and heterotrophic process rates and micropollutant concentrations increased from up- to downstream reaches, but their magnitudes were not distinctly different to conditions at medium discharges.

Direct injection analysis of oxypurinol and metformin in wastewater by hydrophilic interaction liquid chromatography coupled to tandem mass spectrometry

The increasing global prevalence of gout and diabetes has led to a rise in the use of their respective medications, allopurinol and metformin. These are excreted via urine as oxypurinol and metformin and are discharged into wastewater and the environment. Current environmental monitoring of those two polar chemicals requires labour intensive and potentially inefficient sample pre‐treatments, such as using solid‐phase extraction or freeze‐drying. This study validated a sensitive and simple method using direct‐injection LC–MS/MS for the simultaneous measurement of oxypurinol and metformin in wastewater. The final method utilised a hydrophilic interaction liquid chromatography together with simple filtration through 0.2 μm regenerated cellulose filter followed by dilution in acetonitrile with a dilution factor of 10. The developed method was validated with the limit of quantifications (LOQ) of 0.11 and 0.34 μg/L for metformin and oxypurinol, respectively. The new method was applied to 42 influent wastewater samples and 6 effluent samples collected from 6 Australian wastewater treatment plants. Both compounds were detected well above the LOQ at concentrations 29–214 μg/L in influent and 2–53 μg/L in effluent for metformin, and 24–248 μg/L in influent and 4–81 μg/L in effluent for oxypurinol, demonstrating its high applicability.

Advanced oxidation of landfill leachate: Removal of micropollutants and identification of by-products

Landfill leachate contains several macropollutants and micropollutants that cannot be removed efficiently by conventional treatment processes. Therefore, an advanced oxidation process is a promising step in post or pre-treatment of leachate. In this study, the effects of Fenton and ozone oxidation on the removal of 16 emerging micropollutants including polycyclic aromatic hydrocarbons (PAHs), phthalates, alkylphenols and pesticides were investigated. The Fenton and ozone oxidation of the leachate were performed with four (reaction time: 20-90 min, Fe(II) dose: 0.51-2.55 g/L, H₂O₂ dose: 5.1-25.5 g/L and pH: 3-5) and two (ozonation time: 10-130 min and pH: 4-10) independent variables, respectively. Among these operating conditions, reaction time played more significant role (p-value < 0.05) in eliminating di-(2-Ethylhexyl) phthalate, 4-nonylphenol and 4-tert-octylphenol for both processes. The results showed that Fenton and ozone oxidation processes had a high degradation potential for micropollutants except for the PAHs including four and more rings. Removal efficiencies of micropollutants by ozone and Fenton oxidation were determined in the range of 5-100%. Although the removal efficiencies of chemical oxygen demand (COD) and some micropollutants such as phthalates were found much higher in the Fenton process than ozonation, the degradation products occurred during the Fenton oxidation were a higher molecular weight. Moreover, the oxidation intermediates for the both processes were found as mainly benzaldehyde, pentanoic acid and hydro cinnamic acid as well as derivatives of naphthalenone and naphthalenediol. Also, acid ester with higher molecular weight, naphthalene-based and phenolic compounds were detected in the Fenton oxidation.

Identification of LC-HRMS nontarget signals in groundwater after source related prioritization

Groundwater is a major drinking water resource but its quality with regard to organic micropollutants (MPs) is insufficiently assessed. Therefore, we aimed to investigate Swiss groundwater more comprehensively using liquid chromatography high-resolution tandem mass spectrometry (LC-HRMS/MS). First, samples from 60 sites were classified as having high or low urban or agricultural influence based on 498 target compounds associated with either urban or agricultural sources. Second, all LC-HRMS signals were related to their potential origin (urban, urban and agricultural, agricultural, or not classifiable) based on their occurrence and intensity in the classified samples. A considerable fraction of estimated concentrations associated with urban and/or agricultural sources could not be explained by the 139 detected targets. The most intense nontarget signals were automatically annotated with structure proposals using MetFrag and SIRIUS4/CSI:FingerID with a list of >988,000 compounds. Additionally, suspect screening was performed for 1162 compounds with predicted high groundwater mobility from primarily urban sources. Finally, 12 nontargets and 11 suspects were identified unequivocally (Level 1), while 17 further compounds were tentatively identified (Level 2a/3). amongst these were 13 pollutants thus far not reported in groundwater, such as: the industrial chemicals 2,5-dichlorobenzenesulfonic acid (19 detections, up to 100 ng L^-1), phenylphosponic acid (10 detections, up to 50 ng L^-1), triisopropanolamine borate (2 detections, up to 40 ng L^-1), O-des[2-aminoethyl]-O-carboxymethyl dehydroamlodipine, a transformation product (TP) of the blood pressure regulator amlodipine (17 detections), and the TP SYN542490 of the herbicide metolachlor (Level 3, 33 detections, estimated concentrations up to 100-500 ng L^-1). One monitoring site was far more contaminated than other sites based on estimated total concentrations of potential MPs, which was supported by the elucidation of site-specific nontarget signals such as the carcinogen chlorendic acid, and various naphthalenedisulfonic acids. Many compounds remained unknown, but overall, source related prioritisation proved an effective approach to support identification of compounds in groundwater.

Implications of biological activated carbon filters for micropollutant removal in wastewater treatment

Granulated Activated Carbon (GAC) filtration is a common process for advanced wastewater treatment. In such filters, the removal of organic substances results from adsorptive as well as biological processes. This work investigated the potential of biological processes and their influence on GAC-filter performance. During 32 months, the removal of micropollutants,Dissolved Organic Carbon (DOC) and the spectral absorption coefficient was monitored in six GAC-filters. The effects of pre-treatment (cloth- and/or membrane-filtration), EBCT (from 6 - 35 min) and GAC-type were evaluated. Likewise, the impact of the influent´s fluctuations in temperature, flow and concentration (ammonia, nitrate, and soluble reactive phosphorus (sRP)) were analysed. Biological processes were tracked by the frequency of backwashing, oxygen consumption, removal of poorly absorbable micropollutants and production of transformation products. Pre-treatment influenced biofilm growth significantly. Membrane filtration delayed the first backwashing event by 122 d in comparison to cloth-filtration, where the first backwash was conducted after only 21 d. Removal of poorly absorbable substances was observed early on (40 - 50 d). Parallel operation contributed to a better utilisation of the GAC-capacity and the biological removal potential. Influent nitrogen species > 0.5 mg N/L promoted biofilm growth, whereas sRP seemed to have no effect. The developed biofilm and optimal operating conditions led to longer life spans of the GAC-filters, making carbon usage rates comparable to those from PAC applications. The results suggest that biological processes accounted for about 25 - 42% of the totally removed DOC at the end of the operation.

Removal of Diclofenac in Wastewater Using Biosorption and Advanced Oxidation Techniques: Comparative Results

Wastewater treatment is a topic of primary interest with regard to the environment. Diclofenac is a common analgesic drug often detected in wastewater and surface water. In this paper, three commonly available agrifood waste types (artichoke agrowaste, olive-mill residues, and citrus waste) were reused as sorbents of diclofenac present in aqueous effluents. Citrus-waste biomass for a dose of 2 g·L−1 allowed for removing 99.7% of diclofenac present in the initial sample, with a sorption capacity of 9 mg of adsorbed diclofenac for each gram of used biomass. The respective values obtained for olive-mill residues and artichoke agrowaste were around 4.15 mg·g−1. Advanced oxidation processes with UV/H2O2 and UV/HOCl were shown to be effective treatments for the elimination of diclofenac. A significant reduction in chemical oxygen demand (COD; 40–48%) was also achieved with these oxidation treatments. Despite the lesser effectiveness of the sorption process, it should be considered that the reuse and valorization of these lignocellulosic agrifood residues would facilitate the fostering of a circular economy.

Enhanced Removal of Contaminants of Emerging Concern through Hydraulic Adjustments in Soil Aquifer Treatment

Water reclamation through the use of soil aquifer treatment (SAT) is a sustainable water management technique with high potential for application in many regions worldwide. However, the fate of contaminants of emerging concern (CECs) during the infiltration of treated wastewater during SAT is still a matter of research. This study investigates the removal capacity of 27 CECs during SAT by means of infiltration experiments into a 6 m soil column. Additionally, the influence of the hydraulic operation of SAT systems on the removal of CECs is investigated by changing the wetting and drying cycle lengths. Sixteen out of 27 CECs are efficiently removed during SAT under various operational modes, e.g., bezafibrate, diclofenac and valsartan. For six substances (4-methylbenzotriazole, amidotrizoic acid, benzotriazole, candesartan, hydrochlorothiazide and sulfamethoxazole), removal increased with longer drying times. Removal of amidotrizoic acid and benzotriazole increased by 85% when the drying cycle was changed from 100 to 444 min. For candesartan and hydrochlorothiazide, removal improved by 35%, and for 4-methylbenzotriazole and sulfamethoxazole, by 57% and 39%, respectively. Thus, enhanced aeration of the vadose soil zone through prolonged drying times can be a suitable technique to increase the removal of CECs during SAT.

Assessing the Mixture Effects in In Vitro Bioassays of Chemicals Occurring in Small Agricultural Streams during Rain Events

Rain events may impact the chemical pollution burden in rivers. Forty-four small streams in Germany were profiled during several rain events for the presence of 395 chemicals and five types of mixture effects in in vitro bioassays (cytotoxicity; activation of the estrogen, aryl hydrocarbon, and peroxisome proliferator-activated receptors; and oxidative stress response). While these streams were selected to cover a wide range of agricultural impacts, in addition to the expected pesticides, wastewater-derived chemicals and chemicals typical for street runoff were detected. The unexpectedly high estrogenic effects in many samples indicated the impact by wastewater or overflow of combined sewer systems. The 128 water samples exhibited a high diversity of chemical and effect patterns, even for different rain events at the same site. The detected 290 chemicals explained only a small fraction (<8%) of the measured effects. The experimental effects of the designed mixtures of detected chemicals that were expected to dominate the mixture effects of detected chemicals were consistent with predictions for concentration addition within a factor of two for 94% of the mixtures. Overall, the burden of chemicals and effects was much higher than that previously detected in surface water during dry weather, with the effects often exceeding proposed effect-based trigger values.

Wastewater-based estimation of the prevalence of gout in Australia

Allopurinol, a first-line gout treatment drug in Australia, was assessed as a wastewater-based epidemiology biomarker of gout via quantification of the urinary metabolite, oxypurinol in wastewater. The in-sewer stability of oxypurinol was examined using laboratory-scale sewer reactors. Wastewater from 75 wastewater treatment plants across Australia, covering approximately 52% (12.2 million) of the country's population, was collected on the 2016 census day. Oxypurinol was quantified in the wastewater samples and population-weighted mass loads calculated. Pearson and Spearman rank-order correlations were applied to investigate any link between allopurinol, other selected wastewater biomarkers, and socio-economic indicators. Oxypurinol was shown to be stable in sewer conditions and suitable as a WBE biomarker. Oxypurinol was detected in all wastewater samples. The estimated consumption of allopurinol ranged from 1.9 to 32 g/day/1000 people equating to 4.8 to 80 DDD/day/1000 people. The prevalence of gout across all tested sewer catchments was between 0.5% to 8%, with a median of 2.9% nationally. No significant positive correlation was observed between allopurinol consumption and alcohol consumption, mean age of catchment population, remoteness or higher socioeconomic status. There was a significant positive correlation with selective analgesic drug use. Wastewater analysis can be used to study gout prevalence and can provide additional insights on population level risk factors when triangulated with other biomarkers.

Elucidation of removal processes in sequential biofiltration (SBF) and soil aquifer treatment (SAT) by analysis of a broad range of trace organic chemicals (TOrCs) and their transformation products (TPs)

Many chemicals with different physico-chemical properties are present in municipal wastewater. In this study, the removal of a broad range of trace organic chemicals (TOrCs) was determined in two biological treatment processes differing in hydraulic retention time: sequential biofiltration (SBF) and soil-aquifer treatment (SAT), operated in Germany and Spain. Occurrence and the degree of removal of more than 150 TOrCs with different physico-chemical properties were analysed, including precursors as well as human metabolites and environmental transformation products (TPs). Ninety TOrCs were detected in the feed water of the SBF system, 40% of these showed removal efficiencies of higher than 30% during biological treatment. In SAT, 70 TOrCs were detected in the feed water, 60% of these could be reduced by more than 30% after approximately 3 days of subsurface treatment. For uncharged and negatively charged TOrCs biological degradation was mainly responsible for the removal, while positively charged TOrCs were most likely also removed by ionic interactions. The detections of TPs confirmed that biodegradation was a major removal process in both systems. The analysis of positively and negatively charged, neutral and zwitterionic TOrCs and the simultaneous analysis of precursors and their biologically formed TPs enabled a detailed understanding of underlying mechanisms of their removal in the two systems. On this basis, criteria for site-specific indicator selection were proposed.

Qualitative and quantitative use of micropollutants as source and process indicators. A review

Nowadays, micropollutants such as pharmaceuticals, pesticides and personal care products can be found ubiquitously in the anthropogenically influenced water cycle. As micropollutants have virtually no natural background concentrations they are significantly more sensitive in detecting processes and flow paths than classic inorganic tracers and indicators and at the same time they are often highly source specific. Therefore, using micropollutants as environmental indicators for anthropogenic activities is a common and frequently applied method today. As they interact in many ways with environmental matrices they can be used for source apportionment as well as to estimate flow paths and residence times in waterbodies. This review gives a systematic overview over the large variety of micropollutants used as indicators in the aquatic environment over the last decades together with the prerequisites on their use. Their application is subdivided into their qualitative (compound presence or absence) and quantitative (volume flows) use and shows the numerous possibilities from gaining basic information on the water regime up to advanced applications such as wastewater-based epidemiology.

Dynamics of Wastewater Effluent Contributions in Streams and Impacts on Drinking Water Supply via Riverbank Filtration in Germany-A National Reconnaissance

The discharge of wastewater effluents to a stream that is subsequently used for drinking water abstraction has been previously referred to as de facto water reuse. Where the abstraction of surface water for drinking water production occurs via induced bank filtration or aquifer recharge, additional site-specific factors should be considered to assess the impact of wastewater effluents on bank-filtered water. This study represents the first national reconnaissance to quantify wastewater effluent contributions in streams across Germany and consequences for indirect drinking water abstraction from these streams. An automated assessment using ArcGIS was conducted for river basins considering minimum and mean average discharge conditions of streams as well as discharge from more than 7500 wastewater facilities. In urban areas, where the natural base discharge is low, wastewater effluent contributions greater than 30-50% were determined under mean minimum discharge conditions, which commonly prevail from May to September. A conceptual model was proposed to estimate critical bank filtrate shares resulting in exceedances of monitoring trigger levels for health-relevant chemicals as a universal qualitative assessment regarding the relevance of de facto reuse conditions in surface waters used for drinking water abstraction. This approach was validated using chemical monitoring data for three case study locations.

Effect of design and operational conditions on the performance of subsurface flow treatment wetlands: Emerging organic contaminants as indicators

Six pilot-scale subsurface flow treatment wetlands loaded with primary treated municipal wastewater were monitored over one year for classical wastewater parameters and a set of emerging organic compounds (EOCs) serving as process indicators for biodegradation: caffeine, ibuprofen, naproxen, benzotriazole, diclofenac, acesulfame, and carbamazepine. The wetland technologies investigated included conventional horizontal flow, unsaturated vertical flow (single and two-stage), horizontal flow with aeration, vertical flow with aeration, and reciprocating. Treatment efficiency for classical wastewater parameters and EOCs generally increased with increasing design complexity and dissolved oxygen concentrations. The two aerated wetlands and the two-stage vertical flow system showed the highest EOC removal, and the best performance in warm season and most robust performance in the cold season. These three systems performed better than the adjacent conventional WWTP with respect to EOC removal. Acesulfame was observed to be removed (>90%) by intensified wetland systems and with use of a tertiary treatment sand filter during the warm season. Elevated temperature and high oxygen content (aerobic conditions) proved beneficial for EOC removal. For EOCs of moderate to low biodegradability, the co-occurrence of aerobic conditions and low content of readily available carbon appears essential for efficient removal. Such conditions occurred in the aerated systems and with use of a tertiary treatment sand filter.

Quantification of more than 150 micropollutants including transformation products in aqueous samples by liquid chromatography-tandem mass spectrometry using scheduled multiple reaction monitoring

A direct injection, multi residue analytical method separated in two chromatographic runs was developed utilizing scheduled analysis to simultaneously quantify 154 compounds, 84 precursors and 70 transformation products (TPs)/metabolites. Improvements in the chromatographic data quality, sensitivity and reproducibility were achieved by scheduling the analysis of each analyte into pre-determined retention time windows. This study shows the influence of the scan time on the dwell time and the number of data points per peak as well as the effect on the precision of analysis. Lowering the scan time decreased dwell time to a minimal value, however, this had no negative effects on the precision. Increasing the number of data points per peak by decreasing the scan time led to more accurate peak shapes. A final set of parameters was chosen to obtain a minimum of 10 data points per peak to guarantee accurate peak shapes and thus reproducibility of analysis. A validation of the method was performed for different water matrices yielding very good linearity for all substances, with limits of quantification mainly in the lower to mid ng/L-range and recoveries mainly between 70 and 125% for surface water, bank filtrate as well as influents and effluents of wastewater treatment plants. The analysis of environmental samples and wastewater revealed the occurrence of selected precursors and TPs in all analyzed matrices: 95% of the compounds in the target list could be quantified in at least one sample. The relevance of TPs and metabolites such as valsartan acid and clopidogrel acid was also confirmed by their detection in all aqueous matrices. Wastewater indicators such as acesulfame and diclofenac were detected at elevated concentrations as well as substances such as oxipurinol which so far were not in the focus of monitoring programs. The developed method can be used for rapid analysis of various water matrices without any sample enrichment and can aid the assessment of water quality and water treatment processes.

Rapid determination of the emerging contaminant oxypurinol in surface water using solid phase extraction followed by ultra high-performance liquid chromatography with fluorescence detection

A method has been developed for the trace analysis of oxypurinol that is considered as an active pharmaceutical ingredient and an emerging environmental contaminant. The method achieved the identification and quantification of oxypurinol in surface water samples utilizing solid phase extraction and ultra high-performance liquid chromatography with diode array and fluorescence detection for the first time. Four principal parameters of solid phase extraction were optimized to obtain maximum extraction efficiency. Under the isocratic elution of methanol/water (5:95, v/v) and the excitation/emission wavelength of 254/359 nm, a rapid determination was achieved in 2.0 min with good linearity of 1.05-351 μg/L (coefficient of determination above 0.9998). The limit of detection and method detection limit were 0.210 μg/L and 1.34 ng/L, respectively. Precision of the method was evaluated and a relative standard deviation value of 3.3% was obtained for analyses of six replicate spiking blank samples (200 mL, 176 ng/L) according to the overall proposed procedure. The method showed a great anti-interference ability and average spiked recoveries of oxypurinol in five surface water samples were in the range of 94.5-111%. The ability of the method to detect and correctly identify oxypurinol can significantly promote investigation on the occurrence of oxypurinol in water and its potential (eco-)toxicological effects. Graphical abstract Quantification of the emerging contaminant oxypurinol in s urface water using SPE/UHPLC-FLD.

A survey on trace organic chemicals in a German water protection area and the proposal of relevant indicators for anthropogenic influences

A comprehensive monitoring programme of trace organic chemicals (TOrC) was conducted for a German water protection area in karstic ground. The aim of this survey was to detect the potential anthropogenic influences of point sources such as wastewater treatment plants and diffuse pollution such as runoff water from roads on the raw water used for drinking water treatment. The programme comprised seven sampling campaigns within 2 years each with up to 20 sampling sites. In total, the programme included 84 anthropogenic compounds from pharmaceuticals, iodinated X-ray contrast media, sweeteners, industrial chemicals (benzotriazoles, melamines and benzothiazoles) and pesticide metabolites. Cyclamate occurred with the highest median concentration of 44 μg l^-1 in untreated wastewater and acesulfame occurred with a concentration of 20 μg l^-1 in treated wastewater. In runoff water from roads, the most relevant compounds were tolyltriazole with 2.3 μg l^-1 and the desphenyl-chloridazon with 1.2 μg l^-1. In the stream waters, the highest median concentrations were found for melamine and acesulfame both at 0.61 μg l^-1. High elimination during conventional wastewater treatment was observed for 5 out of 49 compounds. These are acetyl-sulfamethoxazole, aciclovir, cyclamate, ibuprofen and saccharin. Based on the survey results, we propose a set of nine compounds to be used as indicators for wastewater, untreated wastewater and runoff water from roads for an efficient surveillance. The indicators are intended to detect anthropogenic influences in surface, ground and drinking water.

Anaerobic biodegradation of (emerging) organic contaminants in the aquatic environment

Although strictly anaerobic conditions prevail in several environmental compartments, up to now, biodegradation studies with emerging organic contaminants (EOCs), such as pharmaceuticals and personal care products, have mainly focused on aerobic conditions. One of the reasons probably is the assumption that the aerobic degradation is more energetically favorable than degradation under strictly anaerobic conditions. Certain aerobically recalcitrant contaminants, however, are biodegraded under strictly anaerobic conditions and little is known about the organisms and enzymatic processes involved in their degradation. This review provides a comprehensive survey of characteristic anaerobic biotransformation reactions for a variety of well-studied, structurally rather simple contaminants (SMOCs) bearing one or a few different functional groups/structural moieties. Furthermore it summarizes anaerobic degradation studies of more complex contaminants with several functional groups (CMCs), in soil, sediment and wastewater treatment. While strictly anaerobic conditions are able to promote the transformation of several aerobically persistent contaminants, the variety of observed reactions is limited, with reductive dehalogenations and the cleavage of ether bonds being the most prevalent. Thus, it becomes clear that the transferability of degradation mechanisms deduced from culture studies of SMOCs to predict the degradation of CMCs, such as EOCs, in environmental matrices is hampered due the more complex chemical structure bearing different functional groups, different environmental conditions (e.g. matrix, redox, pH), the microbial community (e.g. adaptation, competition) and the low concentrations typical for EOCs.

Investigation and risk evaluation of the occurrence of carbamazepine, oxcarbazepine, their human metabolites and transformation products in the urban water cycle

Trace organic contaminants such as pharmaceuticals, personal care products and industrial chemicals are frequently detected in the urban water cycle, including wastewater, surface water and groundwater, as well as drinking water. These also include human metabolites (HMs), which are formed in the human body and then excreted via urine or feces, as well as transformation products (TPs) formed in engineered treatment systems and the aquatic environment. In the current study, the occurrence of HMs as well as their TPs of the anticonvulsants carbamazepine (CBZ) and oxcarbazepine (OXC) were investigated using LC tandem MS in effluents of wastewater treatment plants (WWTPs), surface water and groundwater. Highest concentrations were observed in raw wastewater for 10,11-dihydro-10,11-dihydroxycarbamazepine (DiOHCBZ), 10,11-dihydro-10-hydroxy-cabamazepine (10OHCBZ) and CBZ with concentrations ranging up to 2.7 ± 0.4, 1.7 ± 0.2 and 1.07 ± 0.06 μg L^-1, respectively. Predictions of different toxicity endpoints using a Distributed Structure-Searchable Toxicity (DSSTox) expert system query indicated that several HMs and TPs, in particular 9-carboxy-acridine (9-CA-ADIN) and acridone (ADON), may exhibit an increased genotoxicity compared to the parent compound CBZ. As 9-CA-ADIN was also detected in groundwater, a detailed investigation of the genotoxicity of 9-CA-ADIN is warranted. Investigations of an advanced wastewater treatment plant further revealed that the discharge of the investigated compounds into the aquatic environment could be substantially reduced by ozonation followed by granular activated carbon (GAC) filtration.

Denatonium - A so far unrecognized but ubiquitous water contaminant?

Denatonium is one of the bitterest substances known to man and therefore applied in numerous consumer products to prevent an accidental or intentional consumption. So far no information was available on the occurrence of this compound in the environment. A sensitive targeted method was developed and applied to water samples taken in the federal state of Baden-Württemberg, Germany. Denatonium was detected in 100% of the investigated 22 wastewater treatment plant (WWTP) effluents with a maximum concentration of 341 ng L^-1. Additionally, water samples were taken from the Ammer river over a period of one week and all wastewater impacted samples showed denatonium at concentrations up to 195 ng L^-1. Retrospective analysis of high-resolution mass spectrometric measurements of WWTP effluents from Italy and Switzerland confirmed and therefore point to an international occurrence of denatonium as anthropogenic contaminant.

Biodegradation of the artificial sweetener acesulfame in biological wastewater treatment and sandfilters

A considerable removal of the artificial sweetener acesulfame (ACE) was observed during activated sludge processes at 13 wastewater treatment plants (WWTPs) as well as in a full-scale sand filter of a water works. A long-term sampling campaign over a period of almost two years revealed that ACE removal in WWTPs can be highly variable over time. Nitrifying/denitrifying sequencing batch reactors (SBR) as well as aerobic batch experiments with activated sludge and filter sand from a water works confirmed that both activated sludge as well as filter sand can efficiently remove ACE and that the removal can be attributed to biologically mediated degradation processes. The lab results strongly indicated that varying ACE removal in WWTPs is not associated with nitrification processes. Neither an enhancement of the nitrification rate nor the availability of ammonium or the inhibition of ammonium monooxygenase by N-allylthiourea (ATU) affected the degradation. Moreover, ACE was found to be also degradable by activated sludge under denitrifying conditions, while being persistent in the absence of both dissolved oxygen and nitrate. Using ion chromatography coupled with high resolution mass spectrometry, sulfamic acid (SA) was identified as the predominant transformation product (TP). Quantitative analysis of ACE and SA revealed a closed mass balance during the entire test period and confirmed that ACE was quantitatively transformed to SA. Measurements of dissolved organic carbon (DOC) revealed an almost complete removal of the carbon originating from ACE, thereby further confirming that SA is the only relevant final TP in the assumed degradation pathway of ACE. A first analysis of SA in three municipal WWTP revealed similar concentrations in influents and effluents with maximum concentrations of up to 2.3 mg/L. The high concentrations of SA in wastewater are in accordance with the extensive use of SA in acid cleaners, while the degradation of ACE in WWTPs adds only a very small portion of the total load of SA discharged into surface waters. No removal of SA was observed by the biological treatment applied at these WWTPs. Moreover, SA was also stable in the aerobic batch experiments conducted with the filter sand from a water works. Hence, SA might be a more appropriate wastewater tracer than ACE due to its chemical and microbiological persistence, the negligible sorbing affinity (high negative charge density) and its elevated concentrations in WWTP effluents.

Integrated Evaluation Concept to Assess the Efficacy of Advanced Wastewater Treatment Processes for the Elimination of Micropollutants and Pathogens

A multidisciplinary concept has been developed to compare advanced wastewater treatment processes for their efficacy of eliminating micropollutants and pathogens. The concept is based on (i) the removal/formation of selected indicator substances and their transformation products (TPs), (ii) the assessment of ecotoxicity via in vitro tests, and (iii) the removal of pathogens and antibiotic resistant bacteria. It includes substances passing biological wastewater treatment plants regulated or proposed to be regulated in the European Water Framework Directive, TPs formed in biological processes or during ozonation, agonistic/antagonistic endocrine activities, mutagenic/genotoxic activities, cytotoxic activities, further activities like neurotoxicity as well as antibiotics resistance genes, and taxonomic gene markers for pathogens. At a pilot plant, ozonation of conventionally treated wastewater resulted in the removal of micropollutants and pathogens and the reduction of estrogenic effects, whereas the in vitro mutagenicity increased. Subsequent post-treatment of the ozonated water by granular activated carbon (GAC) significantly reduced the mutagenic effects as well as the concentrations of remaining micropollutants, whereas this was not the case for biofiltration. The results demonstrate the suitability of the evaluation concept to assess processes of advanced wastewater treatment including ozonation and GAC by considering chemical, ecotoxicological, and microbiological parameters.

Ozone treatment of conditioned wastewater selects antibiotic resistance genes, opportunistic bacteria, and induce strong population shifts

An ozone treatment system was investigated to analyze its impact on clinically relevant antibiotic resistant bacteria (ARB) and antibiotic resistant genes (ARGs). A concentration of 0.9±0.1g ozone per 1g DOC was used to treat conventional clarified wastewater. PCR, qPCR analyses, Illumina 16S Amplicon Sequencing, and PCR-DGGE revealed diverse patterns of resistances and susceptibilities of opportunistic bacteria and accumulations of some ARGs after ozone treatment. Molecular marker genes for enterococci indicated a high susceptibility to ozone. Although they were reduced by almost 99%, they were still present in the bacterial population after ozone treatment. In contrast to this, Pseudomonas aeruginosa displayed only minor changes in abundance after ozone treatment. This indicated different mechanisms of microorganisms to cope with the bactericidal effects of ozone. The investigated ARGs demonstrated an even more diverse pattern. After ozone treatment, the erythromycin resistance gene (ermB) was reduced by 2 orders of magnitude, but simultaneously, the abundance of two other clinically relevant ARGs increased within the surviving wastewater population (vanA, blaVIM). PCR-DGGE analysis and 16S-Amplicon-Sequencing confirmed a selection-like process in combination with a substantial diversity loss within the vital wastewater population after ozone treatment. Especially the PCR-DGGE results demonstrated the survival of GC-rich bacteria after ozone treatment.

Quantitative target and systematic non-target analysis of polar organic micro-pollutants along the river Rhine using high-resolution mass-spectrometry--Identification of unknown sources and compounds

In this study, the contamination by polar organic pollutants was investigated along the Rhine River, an important source of drinking water for 22 million people in central Europe. Following the flow of the river, a traveling water mass was sampled using weekly flow-proportional composite samples at ten different downstream sites, including main tributaries. Using a broad analytical method based on solid phase extraction and high-resolution mass spectrometry, the water was analyzed for more than 300 target substances. While the water in Lake Constance contained only 83 substances in often low concentrations, the number of detects found in the water phase increased to 143 substances and a weekly load of more than 7 tons at the last sampling site, the Dutch-German border. Mostly present were chemicals originating from wastewater treatment plants, especially the artificial sweetener Acesulfam and two pharmaceuticals, Metformin and Gabapentin, which dominate the weekly load up to 58%. Although the sample campaign was performed in a dry period in early spring, a large variety of pesticides and biocides were detected. Several industrial point sources were identified along the waterway's 900 km journey, resulting in high concentrations in the tributaries and loads of up to 160 kg. Additionally, an unbiased non-target analysis was performed following two different strategies for the prioritization of hundreds of potentially relevant unknown masses. While for the first prioritization strategy, only chlorinated compounds were extracted from the mass spectrometer datasets, the second prioritization strategy was performed using a systematic reduction approach between the different sampling sites. Among others, two substances that never had been detected before in this river, namely, the muscle relaxant Tizanidine and the solvent 1,3-Dimethyl-2-imidazolidinone (DMI), were identified and confirmed, and their loads were roughly estimated along the river.

Spoilt for choice: A critical review on the chemical and biological assessment of current wastewater treatment technologies

The knowledge we have gained in recent years on the presence and effects of compounds discharged by wastewater treatment plants (WWTPs) brings us to a point where we must question the appropriateness of current water quality evaluation methodologies. An increasing number of anthropogenic chemicals is detected in treated wastewater and there is increasing evidence of adverse environmental effects related to WWTP discharges. It has thus become clear that new strategies are needed to assess overall quality of conventional and advanced treated wastewaters. There is an urgent need for multidisciplinary approaches combining expertise from engineering, analytical and environmental chemistry, (eco)toxicology, and microbiology. This review summarizes the current approaches used to assess treated wastewater quality from the chemical and ecotoxicological perspective. Discussed chemical approaches include target, non-target and suspect analysis, sum parameters, identification and monitoring of transformation products, computational modeling as well as effect directed analysis and toxicity identification evaluation. The discussed ecotoxicological methodologies encompass in vitro testing (cytotoxicity, genotoxicity, mutagenicity, endocrine disruption, adaptive stress response activation, toxicogenomics) and in vivo tests (single and multi species, biomonitoring). We critically discuss the benefits and limitations of the different methodologies reviewed. Additionally, we provide an overview of the current state of research regarding the chemical and ecotoxicological evaluation of conventional as well as the most widely used advanced wastewater treatment technologies, i.e., ozonation, advanced oxidation processes, chlorination, activated carbon, and membrane filtration. In particular, possible directions for future research activities in this area are provided.