Fe(II) catalyzing sodium percarbonate facilitates the dewaterability of waste activated sludge: Performance, mechanism, and implication

Deep dewatering of sludge and resource recovery of hydroxyapatite: A recyclable approach via ionic liquid biphasic system and hydrogen bonds reformation

Deep dewatering of Waste Activated Sludge (WAS) through mechanical processes remains inefficient, primarily due to the formation of a stable hydrogen bonding network between the biopolymers and water, which consequently leads to significant water trapped by Extracellular Polymeric Substances (EPS). In this study, a novel and recyclable treatment for WAS based on Ionic Liquids (ILs) was established, named IL-biphasic aqueous system (IL-ABS) treatment. Specifically, the IL-ABS formed in WAS facilitated rapid and efficient in-situ deep dewatering while concurrently recovering hydroxyapatite. The water content decreased from an initial 98.27 % to 65.35 % with IL-ABS, formed by 1-Butyl-3-methylimidazolium bromide (BmimBr) and K3PO4 synthesized from waste H3PO4. Moreover, the recycled BmimBr maintaining the water content of the dewatered sludge consistently between 65.61 % and 67.25 % across five cycles, exhibited remarkable reproducibility. Through three-dimensional excitation-emission matrix, lactate dehydrogenase analyses and confocal laser scanning microscopy, the high concentration of BmimBr in the upper phase effectively disrupted the cells and EPS, which exposed protein and polysaccharide on the EPS surface. Subsequently, the K3PO4 in the lower phase led to an enhanced salting-out effect in WAS. Furthermore, FT-IR analysis revealed that K3PO4 disrupted the original hydrogen bonds between EPS and water. Then, BmimBr formed numerous hydrogen bonds with the sludge flocs, leading to deep dewatering and agglomeration of the sludge flocs during the unique phase separation process of IL-ABS. Notably, sludge-derived hydroxyapatite product exhibited remarkable adsorption capacity for prevalent heavy metal contaminants such as Pb2+, Cd2+ and Cu2+, with efficiencies comparable to those of commercial hydroxyapatite, thereby achieving the resource utilization of waste H3PO4. Moreover, economic calculations demonstrated the suitability of this novel treatment. This innovative treatment exhibits potential for practical applications in the non-mechanical deep dewatering of WAS.

Preliminary analysis: Effect of a rotary generator of hydrodynamic cavitation on rheology and methane yield of wastewater sludge

Slightly acidic (pH 5.1) waste sludge with 4.7 % Total Solids (TS) was treated on a laboratory scale pined disc rotary generator of hydrodynamic cavitation (PD RGHC). Influence of four rotor discs with different number of cavitation generation units (CGUs) was investigated: 8-pins, 12-pins, 16-pins and 8-prism elements. The effect of hydrodynamic cavitation (HC) was investigated by analyzing rheological properties, surface tension, dewaterability, and particle size distribution. After subjecting the sludge to 30 cavitation passes, the dewatering ability of the sludge significantly decreased, resulting in a more than two-fold increase in Capillary Suction Time (CST). All regimes were successful in disintegrating particles to smaller sizes. A slight increase of sludge surface tension was measured post cavitation. Cavitated samples displayed a zero-shear viscosity, in contrast to the untreated sample, where viscosity noticeably increased as shear stress decreased. HC did not improve methane yield. Statistically significant correlations between physio-chemical properties and apparent viscosity at low shear stress were identified. Although there were no discernible statistical differences in sludge characteristics, some trends are visible among investigated CGU designs and warrant further research.

The fate of pharmaceuticals and personal care products (PPCPs) in sewer sediments:Adsorption triggering resistance gene proliferation

In recent years, large quantities of pharmaceuticals and personal care products (PPCPs) have been discharged into sewers, while the mechanisms of PPCPs enrichment in sewer sediments have rarely been revealed. In this study, three PPCPs (tetracycline, sulfamethoxazole, and triclocarban) were added consecutively over a 90-day experimental period to reveal the mechanisms of PPCPs enrichment and the transmission of resistance genes in sewer sediments. The results showed that tetracycline (TC) and triclocarban (TCC) have higher adsorption concentration in sediments compared to sulfamethoxazole (SMX). The absolute abundance of Tets and suls genes increased in sediments under PPCPs pressure. The increase in secretion of extracellular polymeric substances (EPS) and the loosening of the structure exposed a large number of hydrophobic functional groups, which promoted the adsorption of PPCPs. The absolute abundance of antibiotic resistance genes (ARGs), EPS and the content of PPCPs in sediments exhibited significant correlations. The enrichment of PPCPs in sediments was attributed to the accumulation of EPS, which led to the proliferation of ARGs. These findings contributed to further understanding of the fate of PPCPs in sewer sediments and opened a new perspective for consideration of controlling the proliferation of resistance genes.

Synergetic conditioning via oxalic acid enhanced Fe2+/CaO2 and skeleton construct to achieve deep dewatering of sewage sludge

Extracellular polymeric substance (EPS) with highly hydrophilic groups and sludge with high compressibility are determined sludge dewaterability. Herein, Fe2+ catalyzed calcium peroxide (CaO2) assisted by oxalic acid (OA) Fenton-like process combined with coal slime was applied to improve sludge dewaterability. Results demonstrated that the sludge treated by 0.45/1/1.1-OA/Fe2+/CaO2 mM/g DS, the water content (WC), specific resistance to filtration and capillary suction time dropped to 53.01%, 24.3 s and 1.2 × 1012 m/kg, respectively. Under coal slime ratio as 0.6, WC and compressibility were further reduced to 42.72% and 0.66, respectively. The hydroxyl radicals generated by OA/Fe2+/CaO2 under near-neutral pH layer by layer collapsed EPS, resulting in the degradation and migration of inner releasing components and the exposure of inner sludge flocs skeleton. The hydrophilic tryptophan-like protein of TB-EPS were degraded into aromatic protein of S-EPS and exposed inner hydrophobic sites. The protein secondary structures were transformed by destroying hydrophilic functional groups, which were attributed to the reducing α-helix ratio and reconstructing β-sheet. Moreover, coal slime as the skeleton builder lowered compressibility and formed more macropores to increase the filterability of pre-oxidized sludge for the higher intensity of rigid substances. This study deepened the understanding of OA enhanced Fenton-like system effects on sludge dewaterability and proposed a cost-effective and synergistic waste treatment strategy in sludge dewatering.

Abiotic natural attenuation of 1,2,3-trichloropropane by natural magnetite under O2 perturbation

1,2,3-Trichloropropane (TCP) is an emerging groundwater pollutant, but there is a lack of reported studies on the abiotic natural attenuation of TCP by iron minerals. Furthermore, perturbation by O2 is common in the shallow subsurface by both natural and artificial processes. In this study, natural magnetite was selected as the reactive iron mineral to investigate its role in the degradation of TCP under O2 perturbation. The results indicated that the mineral structural Fe(II) on magnetite reacted with dissolved oxygen to generate O2-· and HO·. Both O2-· and HO· contributed to TCP degradation, with O2-· playing a more important role. After 56 days of reaction, 66.7% of TCP was completely dechlorinated. This study revealed that higher magnetite concentrations, smaller magnetite particle sizes, and lower initial TCP concentrations favored TCP degradation. The presence of <10 mg/L natural organic matter (NOM) did not affect TCP degradation. These findings significantly advance our understanding of the abiotic natural attenuation mechanisms facilitated by iron minerals under O2 perturbation, providing crucial insights for the study of natural attenuation.

Comprehensive assessment of enhancing dewaterability of dredged sediments by starch-based flocculant

Dredged sediment poses significant challenges for transportation and subsequent treatment due to its high water content and large volume. Coagulation, a common method of dewatering, can significantly enhance the dewatering performance of dredged sediment. This study synthesized a cationic starch-based flocculant [starch-3-chloro-2-hydroxypropyl trimethylammonium chloride (St-CTA)] through etherification for the flocculation dewatering of dredged sediment. The effectiveness and mechanism of St-CTA as a dewatering flocculant for dredged sediment were investigated. The results demonstrated that when the dosage of St-CTA was 12 mg g-1 TSS (total suspended solids), the dehydration property of dredged sediment substantially improved, with the specific resistance to filtration (SRF) decreasing by 93.3%, the capillary suction time (CST) by 93.5%, and the water content of the filter cake (WC) by 9.7%. The removal rate of turbidity of the supernatant from the conditioned dredged sediment reached 99.6%, accelerating the settling speed and effectively capturing and separating fine particles from the sediment. St-CTA significantly increased the median particle size (D50), altered the microstructure and extracellular polymeric substances (EPS) of the flocs, and increased the fractal dimension of the flocs, making them more compact and conducive to the formation of drainage channels. These findings confirm the feasibility of using potentially environmentally friendly St-CTA as a rapid dewatering conditioning agent for sediment.

Mechanistic insight into the aggregation ability of anammox microorganisms: Roles of polarity, composition and molecular structure of extracellular polymeric substances

The chemical characteristics of extracellular polymeric substances (EPS) of anammox bacteria (AnAOB) play a crucial role in the rapid enrichment of AnAOB and the stable operation of wastewater anammox processes. To clarify the influential mechanisms of sludge EPS on AnAOB aggregation, multiple parameters, including the polarity distribution, composition, and molecular structure of EPS, were selected, and their quantitative relationship with AnAOB aggregation was analyzed. Compared to typical anaerobic sludge (anaerobic floc and granular sludge), the anammox sludge EPS exhibited higher levels of tryptophan-like substances (44.82-56.52 % vs. 2.57-39.81 %), polysaccharides (40.02-53.49 mg/g VSS vs. 30.22-41.69 mg/g VSS), and protein structural units including α-helices (20.70-23.98 % vs. 16.48-19.32 %), β-sheets (37.43-42.98 % vs. 25.78-36.72 %), and protonated nitrogen (Npr) (0.065-0.122 vs. 0.017-0.061). In contrast, it had lower contents of β-turns (20.95-27.39 % vs. 28.17-39.04 %). These biopolymers were found to originate from different genera of AnAOB. Specifically, the α-helix-rich proteins were mainly derived from Candidatus Kuenenia, whereas the extracellular proteins related to tryptophan and Npr were closely associated with Candidatus Brocadia. Critically, these EPS components could drive anammox aggregation through interactions. Substantial amounts of tryptophan-like substances facilitated the formation of β-sheet structures and the exposure of internal hydrophobic clusters, which benefited the anammox aggregation. Meanwhile, extracellular proteins with high Npr content played a pivotal role in the formation of mixed protein-polysaccharide gel networks with the electronegative regions of polysaccharides, which could be regarded as the key component in the maintenance of anammox sludge stability. These findings provide a comprehensive understanding of the multifaceted roles of EPS in driving anammox aggregation and offer valuable insights into the development of EPS regulation strategies aimed at optimizing the anammox process.

Pivotal role of intracellular oxidation by HOCl in simultaneously removing antibiotic resistance genes and enhancing dewaterability during conditioning of sewage sludge using Fe2+/Ca(ClO)2

Pre-acidification has been shown to be crucial in attenuating antibiotic resistance genes (ARGs) during the conditioning of sewage sludge. However, it is of great significance to develop alternative conditioning approaches that can effectively eliminate sludge-borne ARGs without relying on pre-acidification. This is due to the high investment costs and operational complexities associated with sludge pre-acidification. In this study, the effects of Fe2+/Ca(ClO)2 conditioning treatment on the enhancement of sludge dewaterability and the removal of ARGs were compared with other conditioning technologies. The dose effect and the associated mechanisms were also investigated. The findings revealed that Fe2+/Ca(ClO)2 conditioning treatment had the highest potential, even surpassing Fenton treatment with pre-acidification, in terms of eliminating the total ARGs. Moreover, the effectiveness of the treatment was found to be dose-dependent. This study also identified that the •OH radical reacted with extracellular polymeric substance (EPS) and extracellular ARGs, and the HOCl, the production of which was positively correlated with the dose of Fe2+/Ca(ClO)2, could infiltrate the EPS layer and diffuse into the cell of sludge flocs, inducing the oxidation of intracellular ARGs. Furthermore, this study observed a significant decrease in the predicted hosts of ARGs and MGEs in sludge conditioned with Fe2+/Ca(ClO)2, accompanied by a significant downregulation of metabolic pathways associated with ARG propagation, thereby contributing to the attenuation of sludge-borne ARGs. Based on these findings, it can be concluded that Fe2+/Ca(ClO)2 conditioning treatment holds great potential for the removal of sludge-borne ARGs while also enhancing sludge dewaterability, which mainly relies on the intracellular oxidation by HOCl.

In-situ generation of iron activated percarbonate for sustainable sludge dewatering

Effective dewatering of sewage sludge could potentially address the issues of high energy consumption and large carbon footprint inherent in the sludge treatment process, advancing toward carbon neutrality in environmental remediation. Yet, the surface hydrophilic characteristics and water-holding interfacial affinity in sludge led to dwindled sludge-water separation performance. Here, the integration of in-situ generation of iron from zero-valent scrap iron (ZVSI) and sodium percarbonate (SPC) was attempted to attenuate the water-retaining interfacial affinity within sludge, thus achieving superior sludge dewatering performance. Results showed that under the optimal conditions, the ZVSI + SPC system led to a remarkable decline of 76.09 % in the specific resistance to filtration of the sludge, accompanied by a notable decline of 34.96 % in the water content. Moreover, the utilization of ZVSI + SPC system could be a viable alternative to the traditional strategies in terms of enhanced sludge dewaterability, offering application potential with stable operating performance, economic feasibility, and reduced carbon emissions. Investigation into dewatering mechanism revealed that ZVSI could maintain the Fe3+/Fe2+ in a stable dynamic cycle and continuously in-situ generate Fe2+, thereby efficaciously fostering the SPC activation for the ceaseless yield of reactive oxygen species. The predominant •OH and 1O2 efficiently decomposed the hydrophilic biopolymers, therefore minimizing the hydrophilic protein secondary structures, along with the hydrogen and disulfide bonds within proteins. Subsequently, the water-holding interfacial affinity was profoundly diminished, leading to intensified hydrophobicity, self-flocculation, and dewaterability. These findings have important implications for the advancement of efficacious ZVSI + SPC conditioning techniques toward sustainable energy and low-carbon prospects.

Application of calcium peroxide in promoting resource recovery from municipal sludge: A review

The harmless disposal, resource recovery, and synergistic efficiency reduction of municipal sludge have been the research focuses for the last few years. Calcium peroxide (CaO2) is a multifunctional and safe peroxide that produces an alkaline oxidation environment to promote the fermentation of municipal sludge to produce hydrogen (H2) and volatile fatty acids (VFAs), thus realizing sludge resource recovery. This review outlines the research achievements of CaO2 in sludge resource recovery, improvement of sludge dewaterability, and removal of pollutants from sludge in recent years. Meanwhile, the mechanism of CaO2 and its influencing factors have also been comprehensively summarized. Finally, the future development direction of the application of CaO2 in municipal sludge is prospected. This review would provide theoretical reference for the potential engineering applications of CaO2 in improving sludge treatment in the future.

Enhanced dewatering extent of sludge by Fe3O4-driven heterogeneous Fenton

Homogeneous Fenton (Fe2+/H2O2) serves as a high-efficiency conditioning method for sludge dewatering due to the generation of strong oxidizing hydroxyl radicals (OH). However, high dose of ferric salts produces iron-rich dewatered sludge and decrease sludge organic matters, which will not be conducive to the subsequent disposal and reutilization. Considering advantages of Fe3O4 as heterogeneous Fenton catalyst, Fe3O4-activated H2O2 (Fe3O4 + H2O2) in this study was adopted to improve sludge deep-dewatering. Reduction efficiency of the bound water (71.3 %) after Fe3O4 + H2O2 treatment (after a reaction time of 30 min) were much higher than those in the Fe2++H2O2 treatment. Especially, the moisture content of treated sludge cake by Fe3O4 + H2O2 remarkably decreased from 86.4 % to 61.3 %. Improvement mechanism of sludge dewatering after Fe3O4 + H2O2 treatment mainly included electrostatic neutralization, reactive radical oxidation, and skeleton building by analysis of contribution factors. The generation of H+ in acidification could neutralize the negatively charged compounds to promote sludge hydrophobicity. Meanwhile reactive radicals generated from Fe3O4 + H2O2 destroyed sludge extracellular polymeric substances and cell structure to release intracellular water. Furthermore, Fe3O4 as a skeleton builder could reconstruct destructive sludge flocs and form new dewatering channels. Finally, low Fe leaching content and recoverability of Fe3O4 effectively will decrease environmental implication.

Research progress in improving sludge dewaterability: sludge characteristics, chemical conditioning and influencing factors

Sludge from wastewater treatment processes with high water content and large volume has become an inevitable issue in environmental management. Due to the challenging dewatering properties of sludge, current mechanical dewatering methods are no longer sufficient to meet the escalating water content standards of sludge. This paper summarizes the characteristics of various sludge and raises reasons for the their dewaterability differences. Affected by extracellular polymeric substances, biological sludge is hydrophilic and negatively charged, which limits the dewatering degree. The rheological properties, flocs, ionic composition, and solid phase concentration of the sludge also influence the dewatering to some extent. For these factors, the chemical conditioning measures with simple operation and excellent effect improve its dewaterability, which mainly include flocculation/coagulation, acid/alkali treatment, advanced oxidation, surfactant treatment and combined treatment. There is a growing necessity to explore the development of new chemical conditioning agents, even though traditional agents continue to remain widely used. However, the development of these new agents should prioritize finding a balance between various factors such as efficiency, effectiveness, ease of operation, environmental safety, and cost-effectiveness. Electrochemical dewatering enhances solid-liquid separation, and its coupling with chemical conditioning is also an excellent means to further reduce water content. In addition, the improvement of press filter is an effective way, which is influenced by pressure, processing time, sludge cake thickness and pore structure, filter media etc. In general, it is essential to develop new conditioning agents and enhance mechanical filtration press technology based on a thorough understanding of various sludge properties. Concurrently, an in-depth study of the principles of mechanical pressure filtration will contribute to establishing a theoretical foundation for effective deep sludge dewatering and propel further advancements in this field.

Enhanced biomethane production from waste activated sludge anaerobic digestion by ceramsite and amended Fe2O3 ceramsite

Wastes recycling and reutilization technique could simultaneously fulfill waste control and energy recovery sustainably, which has attracted increasing attention. This work proposed a novel waste reuse technology utilizing ceramsite and amended Fe2O3-ceramsite made from waste activated sludge (WAS) as additives to promote the yield of methane from WAS anaerobic digestion (AD). Experimental results demonstrated that compared to the control (85.05 ± 0.2 mL CH4/g-VS), the cumulative methane yield was effectively enhanced by 14% and 40% when ceramsite and Fe2O3-ceramsite were added. Further investigation revealed that ceramsite, especially the Fe2O3-ceramsite, enriched the populations of key anaerobes involved in hydrolysis, acidification, and methanogenesis. Meanwhile, potential syntrophic metabolisms between syntrophic bacteria and methanogens were confirmed in the Fe2O3-ceramsite AD system. Mechanisms studies exhibited that ceramsite and Fe2O3-ceramsite reinforced intermediate processes for methane production. The favorable pore structure, enhanced Fe (III) reduction capacity and conductivity also contributed a lot to the AD process.

Percarbonate-strengthened ferrate pretreatment for enhancing short-chain fatty acids production from sewage sludge

Sewage sludge management poses a pressing environmental challenge, demanding the implementation of sustainable solutions to facilitate resource recovery. Short-chain fatty acids (SCFAs) serve as valuable chemicals and renewable energy sources, underscoring the importance of maximizing their production to achieve sustainable waste management. Therefore, this study proposes a novel and green strategy, i.e., percarbonate-strengthened ferrate pretreatment to enhance SCFAs synthesis from sewage sludge, because percarbonate could activate ferrate oxidation through providing (bi) carbonate and hydrogen peroxide. Results show that percarbonate largely reduces the required ferrate dosage for fermentation improvement, and their combination exhibits obvious synergistic effects on SCFAs accumulation and sludge reduction. Under the optimal pretreatment conditions, SCFAs production is promoted to 3670.2 mg COD/L, representing a remarkable increase of 5512.4 %, 156.0 % or 395.1 % compared to the control, percarbonate alone or ferrate alone, respectively. Mechanism explorations demonstrate that percarbonate-strengthened ferrate pretreatment significantly enhances sludge solubilization, elevates substrate biodegradability, and alters the physiochemical properties of sludge to favor organics fermentation. The synergistic effects on solid organics release and sludge properties can be attributed to the combined mechanisms of enhanced oxidation and alkaline hydrolysis. Further investigations on metabolic pathways reveal that the combination substantially improves key enzyme activities associated with hydrolysis and SCFAs formation, while severely inhibits that of SCFAs consumption. These findings are further supported by the functional genes coding relevant enzymes. Moreover, the combination alters microbial structures and compositions, leading to the screening and enrichment of key microbes that facilitate SCFAs accumulation. This innovative strategy holds significant promise in advancing sewage sludge management towards a more circular and resource-efficient paradigm.

Pretreatment of free nitrous acid combined with calcium hypochlorite for enhancement of hydrogen production in waste activated sludge

A variety of variables limit the recovery of resources from anaerobic fermentation of waste activated sludge (WAS), hence pretreatment strategies are necessary to be investigated to increase its efficiency. A combination of free nitrous acid (FNA) and calcium hypochlorite [Ca(ClO)2] was employed in this investigation to significantly improve sludge fermentation performance. The yields of cumulative hydrogen for the blank and FNA treatment group were 1.09 ± 0.16 and 7.36 ± 0.21 mL/g VSS, respectively, and 6.59 ± 0.24 [0.03 g Ca(ClO)2/g TSS], 7.75 ± 0.20 (0.06), and 8.58 ± 0.22 (0.09) mL/g VSS for the Ca(ClO)2 groups. The co-treatment greatly boosted hydrogen generation, ranging from 39.97 ± 2.26 to 76.20 ± 4.78 % as compared to the solo treatment. Mechanism analysis demonstrated that the combined treatment disturbed sludge structure and cell membrane permeability even more, which released more organic substrates and enhanced biodegradability of fermentation broth. This paper describes a unique strategy to sludge pretreatment that expands the use of Ca(ClO)2 and FNA in anaerobic fermentation, with implications for sludge disposal and energy recovery.

Promoting dewatering efficiency of sludge by bioleaching coupling chemical flocculation

In recent years, bioleaching has emerged as a cost-effective technology for enhancing the dewaterability of sludge. However, the lengthy treatment time involved in sludge bioleaching processes limits daily treatment capacity for sludge. Here, a novel approach was developed through a short time of sludge bioleaching with A. ferrooxidans LX5 (A. f) and A. thiooxidans TS6 (A. t) followed by polyferric sulfate (PFS) flocculation (A. f + A. t + PFS). After 12.5 h of the A. f + A. t + PFS treatment (30% A. f, 10% A. t, 40 mg/g DS S0, 60 mg/g DS FeSO4•7H2O, and 120 mg/g DS PFS), the reduction efficiency of specific resistance to filtration (SRF) and sludge cake moisture content reached 94.0% and 11.6%, respectively, which were comparable to the results achieved through 24 h of completed bioleaching treatment. In pilot-scale applications, the mechanical dewatering performance was notably improved following A. f + A. t + PFS treatment, with the low moisture content of the treated sludge cake (∼59.2%). This study provides new insights into the A. f + A. t + PFS process and holds potential for developing efficient and promising sludge dewatering strategies in engineering application.

Roles of catalytic ozonation by bimetallic Fe/Ce loading sludge-derived biochar in amelioration of sludge dewaterability: Performance and implementation mechanisms

In this study, an environmentally friendly alternative was developed using catalytic ozonation by sludge-derived biochar loaded with bimetallic Fe/Ce (O3/SBC-FeCe) for enhanced sludge dewatering. The results indicated that the lowest capillary suction time (CST) of 20.9 s and water content of dewatered sludge cake (Wc) of 64.09% were achieved under the dosage of 40 mg O3/g dry solids (DS) and 0.4 g SBC-FeCe/g DS which were considered as the optimum condition. In view of excellent electron exchanging capacity of SBC-FeCe with rich Lewis acid sites and conversions of valence sates of Fe and Ce, more O3 were decomposed into reactive oxygen species under the catalytic action of SBC-FeCe, which strengthened oxidizing capacity. Enhanced oxidation rendered sludge cells inactivation and compact network structure rupture releasing intracellular water and organic substances. Subsequently, hydrophilic organic matters were attacked and eliminated lessening sludge viscosity and colloidal forces and intensifying hydrophobicity and flowability. In addition, changes of sludge morphology suggested that sludge roughness was alleviated, structural strength and compressibility were raised and porous and retiform structure was constructed providing channels for water outflow by adding skeleton builder of SBC-FeCe. Overall, the synergistic interaction of strengthened oxidation and skeleton construction improved sludge dewaterability.

Enhanced methane yield in anaerobic digestion of waste activated sludge by combined pretreatment with fungal mash and free nitrous acid

This study explores a novel approach for enhancing anaerobic digestion of waste activated sludge (WAS) through the combined pretreatment of fungal mash and free nitrous acid (FNA). Aspergillus PAD-2, a fungal strain with superior hydrolase secretion, was isolated from WAS and cultivated in-situ on food waste to produce fungal mash. The solubilization of WAS by fungal mash achieved a high soluble chemical oxygen demand release rate of 548 mg L-1 h-1 within first 3 h. The combined pretreatment of fungal mash and FNA further improved the sludge solubilization by 2-fold and resulted in a doubled methane production rate of 416±11 mL CH4 g-1 volatile solids. The Gompertz model analysis revealed a higher maximum specific methane production rate and shortened lag time by the combined pretreatment. These results demonstrate that the combined fungal mash and FNA pretreatment offers a promising alternative for fast anaerobic digestion of WAS.

Synthesis of modified sludge biochar for flue gas denitration: Biochar properties, synergistic efficiency and mechanism

Biochar has been recommended as a carbon material with high porosity, rich functional groups, and low cost for flue gas denitration. In this study, five different biochar materials, including original sludge biochar (SC), the KOH-impregnated biochar (SCK), the biochar of SCK washing by ultra-water (SCK-W), the H2SO4-impregnated biochar (SCS), and the biochar of SCS washing by ultra-water (SCS-W), prepared using a one-step activation method were applied to remove NO from flue gases, acting as both reductants and catalysts. The results indicate that the SCK-700 can lead to the highest NO conversion of 100% at 325 °C, and can suppress the acidic gas generation compared with SCS. The order of reduction capacity at 300-400 °C was SCK-700 > SCK-W-700 > SC-700 > SCS-700 > SCS-W-700. Furthermore, the kinetics indicated that adsorption capacity enhanced with the rise in temperature, and that SCK-700 had the largest adsorption capacity, reaching 337.15 mg/g at 400 °C.

A comprehensive assessment on sludge conditioning by pyrite acid eluent-activated peroxymonosulfate based on dewaterability, heavy metals risk and ore recovery

Wastewater activated sludge (WAS) has poor dewaterability and contains heavy metals (HMs), limiting its land application. Therefore, in this study, a novel pyrite acid eluent-activated peroxymonosulfate (Fe2+pyrite/PMS) conditioning approach that can completely recover the residual pyrite and greatly reduce acid use was developed to improve WAS dewaterability, and the HMs chemical speciation and risks of conditioned WAS were assessed. Our results showed that under the optimized operational parameters, the capillary suction time (CST) and water content (Wc) of WAS decreased by 46.03% and 7.75%, respectively. Furthermore, during Fe2+pyrite/PMS conditioning processing, sulfate radical (SO4-) destroyed the extracellular polymeric substances (EPS) matrix, causing bound water release and the decrease of proteins/polysaccharides in outer layered EPS, even the decomposition of some protein-N in tightly bound EPS (TB-EPS) into inorganic-N. In addition, although the total concentration of HMs in the conditioned WAS matrix increased, the Ni concentration decreased in the solid fraction. Further, the risk assessment code (RAC) levels did not increase, and the eco-toxicity of Cr became weakened after Fe2+pyrite/PMS conditioning. However, after acid extraction, the pyrite residue had worsened recycle performance because the passivation layer contained S0/Sn2- on its surface, and no additional elements were detected in the pyrite residue, which had almost no effect on its further usage.

Enhancement of sludge dewaterability by repeated inoculation of acidified sludge: Extracellular polymeric substances molecular structure and microbial community succession

Improving the dewatering performance of sewage sludge is of great scientific and engineering significance in the context of accelerated urbanization and increasingly strict environmental regulations. Acidified sludge (AS) can improve sludge dewatering performance, but the dewatering effect of repeated inoculation is unclear. The effects of long-term repeated inoculation of AS on the sludge dewaterability were investigated. The molecular structure and microbial community succession of extracellular polymeric substances (EPS) are emphasized. The results revealed that increasing the inoculation ratio of AS reduced the pH, absolute value of sludge zeta potential, and sludge particle size, and the decreasing trend was more evident with prolonging treatment time. Under the conditions of 30% and 50% AS inoculation, the dewatering performance of the sludge was significantly improved (p < 0.05). Compared with the raw sludge, the specific resistance of filtration (SRF) and capillary suction time of 30% inoculation were reduced by 64.3% and 50.1% after 30 cycles, respectively. Excluding loosely bound (LB)-EPS, soluble (S)-EPS and tightly bound (TB)-EPS exhibited a visible decrease, the protein in TB-EPS was significantly related to sludge dewaterability (p < 0.05). The fluorescent components of aromatic protein and fulvic acid-like substances in TB-EPS were significantly associated with SRF, with a correlation coefficient 0.99 (p < 0.05). Both the increase in the percentages of random coil and decrease in α-helix in TB-EPS contributed to improving dewaterability. Increasing Firmicutes and decreasing Chloroflexi levels improved the sludge dewatering capacity. Repeated inoculation did not disrupt the dewatering effect of AS rather increased the feasibility of the engineering application of AS. Considering the dewatering performance and cost synthetically, 30% AS inoculated ratio is feasible for practical applications.

Extracellular polymeric substances sustain photoreduction of Cr(VI) by Shewanella oneidensis-CdS biohybrid system

Photosensitized biohybrid system (PBS) enables bacteria to exploit light energy harvested by semiconductors for rapid pollutants transformation, possessing a promising future for water reclamation. Maintaining a biocompatible environment under photocatalytic conditions is the key to developing PBS-based treatment technologies. Natural microbial cells are surrounded by extracellular polymeric substances (EPS) that either be tightly bound to the cell wall (i.e., tightly bound EPS, tbEPS) or loosely associated with cell surface (i.e., loosely bound EPS, lbEPS), which provide protection from unfavorable environment. We hypothesized that providing EPS fractions can enhance bacterial viability under adverse environment created by photocatalytic reactions. We constructed a model PBS consisting of Shewanella oneidensis and CdS using Cr(VI) as the target pollutant. Results showed complete removal of 25 mg/L Cr(VI) within 90 min without an electron donor, which may mainly rely on the synergistic effect of CdS and bacteria on photoelectron transfer. Long-term cycling experiment of pristine PBS and PBS with extra EPS fractions (including lbEPS and tbEPS) for Cr(VI) treatment showed that PBS with extra lbEPS achieved efficient Cr(VI) removal within five consecutive batch treatment cycles, compared to the three cycles both in pristine PBS and PBS with tbEPS. After addition of lbEPS, the accumulation of reactive oxygen species (ROS) was greatly reduced via the EPS-capping effect and quenching effect, and the toxic metal internalization potential was lowered by complexation with Cd and Cr, resulting in enhanced bacterial viability during photocatalysis. This facile and efficient cytoprotective method helps the rational design of PBS for environmental remediation.

Efficient removal of chloroform from groundwater using activated percarbonate by cellulose nanofiber-supported Fe/Cu nanocomposites

Chloroform (CF) is a recalcitrant halogenated methane (HM) that has received widespread attention due to its frequent detection in groundwater and its potential carcinogenic risk. In this study, TEMPO-oxidized cellulose nanofiber-supported iron/copper bimetallic nanoparticles (TOCNF-Fe/Cu), a novel composite catalyst, was synthesized to activate sodium percarbonate (SPC) for the removal of CF from groundwater. The results showed that over 96.3% of CF could be removed in a neutral reaction medium (pH 6.5-9) within 180 min using 0.66 g L-1 of TOCNF (0.32)-Fe/Cu (1) and 1 mM of SPC, which outperforms typical advanced oxidation processes. The reaction mechanism of the TOCNF-Fe/Cu-SPC system for the CF removal was elucidated. As demonstrated through electron paramagnetic resonance and quenching experiments, the TOCNF-Fe/Cu-SPC system was found to include •OH and O2•-, where the latter played a dominant role in the CF removal. DFT calculations indicated that TOCNF improved the electron transport capability of Fe/Cu and reduced the transition state energy. The Fe species on the surface of TOCNF-Fe/Cu were identified as the primary active sites for SPC activation, whereas the Cu species were beneficial to the regeneration of the Fe species. Additionally, TOCNF-Fe/Cu was found to have good recyclability and stability. The feasibility of the TOCNF-Fe/Cu-SPC system was further confirmed by applying it for the efficient removal of composite HMs from actually contaminated groundwater. Overall, the TOCNF-Fe/Cu-SPC system is an attractive candidate for the treatment of HM-contaminated groundwater.

Insights into thermal hydrolysis pretreatment temperature for enhancing volatile fatty acids production from sludge fermentation: Performance and mechanism

To reveal the impact of thermal hydrolysis pretreatment (THP) temperature on the unclear mechanisms of volatile fatty acids (VFAs) production, four groups were established with different temperatures (100, 120, 140 and 160 °C), and high throughput sequencing technology was utilized. The results indicated that the optimal VFAs production occurred at 140 °C. Moreover, as the THP temperature increased, the proportion of acetic acid also increased, accounting for 10.8% to 26.7% of the VFAs, compared to only 4.9% in the control group. Mechanism investigations revealed that THP facilitated the hydrolysis and release of biodegradable organic matter. Moreover, the abundance of VFAs production and hydrolytic microorganisms and related metabolic functional genes expression were evidently improved by THP. Overall, this study deepens the understanding of the mechanisms through which different THP temperatures stimulate the production of VFAs through acidogenic fermentation, providing technical support for future THP application in sludge treatment.

Surfactant enhances anaerobic fermentative hydrogen sulfide production: Changes in sulfur-containing organics structure and microbial community

The presence of surfactants in waste activated sludge (WAS) system is generally regarded as beneficial to sludge treatment such as enhancing sludge dewatering and improving value-added fermentation products generation. However, in this study, it was firstly found that sodium dodecylbenzene sulfonate (SDBS, a typical surfactant) obviously increased toxic hydrogen sulfide (H₂S) gas production from WAS anaerobic fermentation at environmentally relevant concentrations. Experimental results showed that H₂S production from WAS significantly increased from 53.24 × 10^-3 to 111.25 × 10^-3 mg/g volatile suspended solids (VSS) when SDBS level increased from 0 to 30 mg/g total suspended solid (TSS). It was found that SDBS presence destroyed WAS structure and enhanced sulfur containing organics release. SDBS reduced the proportion of α-helix structure, damaged disulfide bridges and protein conformation, and effectively destroyed protein structure. SDBS promoted sulfur containing organics degradation and provided more readily hydrolyzed micro-molecule organics for sulfide production. Microbial analysis showed that SDBS addition enhanced the abundance of functional genes encoding protease, ATP-binding cassette transporters, and amino acids lyase, enhanced the activities and abundance of hydrolytic microbes, thus increased sulfide production from the hydrolysis of sulfur containing organics. Compared with the control, 30 mg/g TSS SDBS increased organic sulfurs hydrolysis and amino acids degradation by 47.1 % and 63.5 %, respectively. Key genes analysis further showed that SDBS addition promoted sulfate transport system and dissimilatory sulfate reduction. SDBS presence also lowered fermentation pH, promoted the chemical equilibrium transformation of sulfide, thus increased H₂S gas release.

Insights into the role of ·OH generated in Fe2+/CaO2/coal slime system for efficient extracellular polymeric substances degradation to improve dewaterability of sewage sludge

The disposal of massive sewage sludge and coal slime is a problem facing municipalities in China. A hypothesis for the co-disposal of sludge and coal slime is proposed to improve dewaterability by utilizing the beneficial role of coal slime as a filter assist and CaO₂ enhanced system in this research. Results showed that capillary suction time, specific resistance to filtration and water content decreased dramatically from 49.3 s, 13.2 × 10¹² m/kg and 84.85% to 19.1 s, 1.0 × 10¹² m/kg and 50.07%, respectively, under the optimal conditions with 0.3/0.1/0.3-Fe²⁺/CaO₂/coal slime g/g DS. The hydroxyl radicals generated in the Fe²⁺/CaO₂ process acted on extracellular polymeric substances (EPS), resulting in a drop in the ratio of α-helix/(β-sheet + random coil) in the secondary structure of EPS proteins and a reduction in the concentration of aromatic proteins and tryptophan-like substances in TB-EPS, thereby enhancing the sludge dewaterability. Furthermore, coal slime as the skeleton building material induced a rise in sludge particle size and contact angle, lowering the hydrophilicity, compressibility of sludge and providing more channels to facilitate water flow. This work verified the promising application prospect of the Fe²⁺/CaO₂/coal slime combined system in the enhancement of sludge dewaterability.

Enhanced degradation of extracellular polymeric substances by yeast in activated sludge to achieve sludge reduction

Candida Tropicalis was used to improve the dewaterability of activated sludge (AS) and reduce its biomass by degrading EPS in AS. The protein, polysaccharide, and hydrophilic amino acids in EPS decreased by 54.50, 29.20, and 61.01%, respectively. Meanwhile, molecular weight distribution indicated that yeast degraded macromolecular organics into small molecular ones. The direct addition of yeast to AS was more conducive to EPS degradation. With the addition of 0.75 g/L of wet yeast cells and 24 h of aeration enhanced the dewaterability of AS. The CST and MLSS decreased by 24.44 and 10.51%, respectively. After 30 days of operation of lab-scale continuous SBRs, the CST and MLSS of AS were reduced by 6.37 ± 2.01 and 3.57 ± 0.52%, respectively. FTIR spectroscopy results showed that some hydrophilic functional groups were reduced. This study provides a new approach for the in-situ reduction of AS in wastewater treatment plant.

Conditioning fecal sludge of public toilets with coupled zero-valent iron and persulfate: Efficiency and mechanism

This study investigated the efficiency of fecal sludge conditioning using peroxydisulfate (PDS) activated by zero-valent iron (ZVI). For fecal sludge obtained from public toilets in a densely-populated rural area in China, the ZVI/PDS coupling greatly improved its dewaterability as well as the supernatant quality in terms of organic matter and nutrient contents. The capillary suction time (CST) and supernatant turbidity of fecal sludge can be reduced up to 97% and 73% respectively in 10 min by the combination of 0.15 g/g TS ZVI and 0.2 g/g TS PDS. Protein removal, especially for tightly and loosely bound extracellular-polymeric-substance (EPS), is more linearly correlated to CST reduction than polysaccharide removal. Fecal sludge dewatering was improved by the hybrid functions of radical oxidation and iron coagulation. The ZVI/PDS treatment produced larger and looser flocs, probably because 1) surface ionic and hydrophilic groups of fecal sludge were reduced, 2) surface charge was neutralized, and 3) secondary structures of EPS proteins were altered by the radicals. The excellent fecal sludge dewatering was related to strengthened particle hydrophobicity and reduced sludge viscosity and compressibility. The results highlight that the ZVI/PDS combination is potentially an effective conditioning approach for fecal sludge from public toilets.

Identification and degradation of structural extracellular polymeric substances in waste activated sludge via a polygalacturonate-degrading consortium

By maintaining the cell integrity of waste activated sludge (WAS), structural extracellular polymeric substances (St-EPS) resist WAS anaerobic fermentation. This study investigates the occurrence of polygalacturonate in WAS St-EPS by combining chemical and metagenomic analyses that identify ∼22% of the bacteria, including Ferruginibacter and Zoogloea, that are associated with polygalacturonate production using the key enzyme EC 5.1.3.6. A highly active polygalacturonate-degrading consortium (GDC) was enriched and the potential of this GDC for degrading St-EPS and promoting methane production from WAS was investigated. The percentage of St-EPS degradation increased from 47.6% to 85.2% after inoculation with the GDC. Methane production was also increased by up to 2.3 times over a control group, with WAS destruction increasing from 11.5% to 28.4%. Zeta potential and rheological behavior confirmed the positive effect which GDC has on WAS fermentation. The major genus in the GDC was identified as Clostridium (17.1%). Extracellular pectate lyases (EC 4.2.2.2 and 4.2.2.9), excluding polygalacturonase (EC 3.2.1.15), were observed in the metagenome of the GDC and most likely play a core role in St-EPS hydrolysis. Dosing with GDC provides a good biological method for St-EPS degradation and thereby enhances the conversion of WAS to methane.

Microplastics decrease the toxicity of cadmium to methane production from anaerobic digestion of sewage sludge

Microplastics (MPs) and Cd have been proven to inhibit methane production from anaerobic digestion of sewage sludge. However, the published studies mainly focused on their single inhibition. This cannot reflect the real-world situations where MPs and Cd co-exist. This study therefore aims to reveal the combined effect of MPs and Cd on anaerobic digestion of sewage sludge. Experimental results showed that PVC-MPs at environmentally relevant levels (e.g., 1, 10 particles/g total solids (TS)) did not affect methane yield but decrease the toxicity of Cd. When PVC-MPs were 30 particles/g TS, the cumulative methane production recovered from 58.8 % (in the presence of 5 mg Cd/g TS) to 89.7 % of the control. Organic fluxes were significantly increased compared with the control, particularly affecting the content of dissolved substances and short-chain fatty acids during anaerobic digestion. Mechanistic exploration showed that the adsorption of Cd by PVC-MPs was higher than that of sludge-substrate, which reduced the bioavailability of Cd by anaerobes, as evidenced by the increased anaerobes driven carbon flux from solid-phase to bio-methane during anaerobic digestion. Overall, these findings identified important factors in determining the toxicity of pollutants on anaerobic digestion process, providing precise data for toxicity evaluation of MPs and metals in anaerobic environment.

A novel insight on the intensification mechanism of sludge dewaterability by ionic liquids

The huge output of sewage sludge has caused a remarkable environmental burden. Sludge dewatering is considered as an important way to reduce the sludge volume. Five imidazole-based ionic liquids were used to improve the dewaterability of sewage sludge. 1-ethyl-3-methylimidazolium dihydrogen phosphate ([Emim][H₂PO₄]) was screened out as a potential conditioner of sludge due to its excellent dewatering performance and reusability. The solid content of sludge filter cake after treatment with [Emim][H₂PO₄] was about 10% higher than that of sludge treated by cationic polyacrylamides (CPAM). The intensification mechanism of ionic liquids to the improvement of sludge dewatering performance was studied. The presence of acidic ionic liquids [Emim][H₂PO₄] resulted the increase of zeta potential from -14.57 ± 0.81 mV to -5.60 ± 0.30 mV and led to the protonation of biopolymers. Acidic ionic liquids [Emim][H₂PO₄] inactivated the microorganism and led to a porous and unconsolidated structure of the solid sludge particles. All these effects were conducive to destroy the microstructure of sludge and release water. However, [Emim]Cl, [Bmim][OTf] and [Hmim][OTf] showed little effect on the protonation of ionizable functional groups at near-neutral environment. The dissolution of biopolymer decreased the zeta potential and strengthened the electrostatic repulsion. So, they showed weaker intensification effects than CPAM.

Targeted Decomplexation of Metal Complexes for Efficient Metal Recovery by Ozone/Percarbonate

Traditional methods cannot efficiently recover Cu from Cu(II)-EDTA wastewater and encounter the formation of secondary contaminants. In this study, an ozone/percarbonate (O₃/SPC) process was proposed to efficiently decomplex Cu(II)-EDTA and simultaneously recover Cu. The results demonstrate that the O₃/SPC process achieves 100% recovery of Cu with the corresponding k_obs value of 0.103 min^-1 compared with the typical ^•OH-based O₃/H₂O₂ process (81.2%, 0.042 min^-1). The carbonate radical anion (CO₃^•-) is generated from the O₃/SPC process and carries out the targeted attack of amino groups of Cu(II)-EDTA for decarboxylation and deamination processes, resulting in successive cleavage of Cu-O and Cu-N bonds. In comparison, the ^•OH-based O₃/H₂O₂ process is predominantly responsible for the breakage of Cu-O bonds via decarboxylation and formic acid removal. Moreover, the released Cu(II) can be transformed into stable copper precipitates by employing an endogenous precipitant (CO₃^2-), accompanied by toxic-free byproducts in the O₃/SPC process. More importantly, the O₃/SPC process exhibits excellent metal recovery in the treatment of real copper electroplating wastewater and other metal-EDTA complexes. This study provides a promising technology and opens a new avenue for the efficient decomplexation of metal-organic complexes with simultaneous recovery of valuable metal resources.

Physiological Responses of Methanosarcina barkeri under Ammonia Stress at the Molecular Level: The Unignorable Lipid Reprogramming

Acetotrophic methanogens' dysfunction in anaerobic digestion under ammonia pressure has been widely concerned. Lipids, the main cytomembrane structural biomolecules, normally play indispensable roles in guaranteeing cell functionality. However, no studies explored the effects of high ammonia on acetotrophic methanogens' lipids. Here, a high-throughput lipidomic interrogation deciphered lipid reprogramming in representative acetoclastic methanogen (Methanosarcina barkeri) upon high ammonia exposure. The results showed that high ammonia conspicuously reduced polyunsaturated lipids and longer-chain lipids, while accumulating lipids with shorter chains and/or more saturation. Also, the correlation network analysis visualized some sphingolipids as the most active participant in lipid-lipid communications, implying that the ammonia-induced enrichment in these sphingolipids triggered other lipid changes. In addition, we discovered the decreased integrity, elevated permeability, depolarization, and diminished fluidity of lipid-supported membranes under ammonia restraint, verifying the noxious ramifications of lipid abnormalities. Additional analysis revealed that high ammonia destabilized the structure of extracellular polymeric substances (EPSs) capable of protecting lipids, e.g., declining α-helix/(β-sheet + random coil) and 3-turn helix ratios. Furthermore, the abiotic impairment of critical EPS bonds, including C-OH, C═O-NH-, and S-S, and the biotic downregulation of functional proteins involved in transcription, translation, and EPS building blocks' supply were unraveled under ammonia stress and implied as the crucial mechanisms for EPS reshaping.

Enhancing sludge dewatering efficiency through bioleaching facilitated by increasing reactive oxygen species

Bioleaching facilitated by iron-oxidizing bacteria is regarded as a promising sludge dewatering method due to excellent dewaterability and low cost. However, a two-days bioleaching time for sludge conditioning decreased its daily treatment capacity. In fact, Fe²⁺ easily reacts with O₂ to produce reactive oxygen species (ROS) with high oxidizing activity. Can bioleaching performed in Fe²⁺-rich system generate ROS to decompose sludge extracellular polymeric substances (EPS)? Here both contribution of ROS produced in bioleaching to improve sludge dewaterability and the increase of ROS content to shorten sludge bioleaching treatment time were investigated. The introduction of H₂O₂ in sludge bioleaching treatment (BS+H₂O₂) to increase ROS could simultaneously improve sludge dewaterability and decrease bioleaching time. Specific resistance to filtration (SRF) and capillary suction time (CST) reduction ratios (90.3% and 80.9%) in BS+H₂O₂ process were much higher than those in other processes after only 30 min reaction. Mechanisms of improving sludge dewaterability in BS+H₂O₂ mainly included ROS oxidation and Fe³⁺ flocculation by analysis of the contribution factors. These findings not only provide an effectively method to promote sludge dewatering efficiency of bioleaching, but also give new sights into the design of cost-efficient processes for improving the sludge dewatering.

Iron-rich digestate biochar toward sustainable peroxymonosulfate activation for efficient anaerobic digestate dewaterability

In this study, a suite of Fe-rich biochars derived from Fenton-like treated digestate (Fe-BC) were fabricated under different pyrolysis temperatures (300, 500, and 800 °C), which were firstly utilized as peroxymonosulfate (PMS) activators for promoting digestate dewaterability with wide applicability. Results showed that compared to the Fe-BC₃₀₀/Fe-BC₅₀₀ + PMS treatments, Fe-BC₈₀₀ + PMS process performed superior digestate dewaterability in which specific resistance to filtration reduction and water content reduction improved by > 12.5% and > 130%, respectively, under the optimal conditions. Mechanistic results demonstrated that in Fe-BC₈₀₀ + PMS system, HO• and SO₄^•- oxidation played a pivotal role on promoted digestate dewaterability, while HO• and ¹O₂ oxidation was dominated in Fe-BC₃₀₀/Fe-BC₅₀₀ + PMS treatments. Fe-BC₈₀₀ containing higher Fe and CO contents could efficiently interact with PMS to generate numerous HO• and SO₄^•- via iron cycle. These highly reactive oxygen species proficiently reduced the hydrophilic biopolymers, protein molecules, and amino acids in extracellular polymeric substances, leading to remarkable decrease in particle size, hydrophilicity, adhesion, network strength, and bound water of digestate. Consequently, the flowability and dewaterability of digestate could be significantly enhanced. The cost-benefit result indicated the Fe-BC + PMS treatment possessed desirable reusability, applicability, and economic viability. Collectively, the Fe-BC + PMS is a high-performance and eco-friendly technique for digestate dewatering, which opens a new horizon towards a closed-loop of digestate reutilization.

Ferrate pretreatment-anaerobic fermentation enhances medium-chain fatty acids production from waste activated sludge: Performance and mechanisms

The rupture of cytoderm and extracellular polymeric substances (EPS), and competitive inhibition of methanogens are the main bottlenecks for medium-chain fatty acids (MCFAs) production from waste activated sludge (WAS). This study proposes a promising ferrate (Fe (VI))-based technique to enhance MCFAs production from WAS through accelerating WAS disintegration and substrates transformation, and eliminating competitive inhibition of methanogens, simultaneously. Results shows that the maximal MCFAs production attains 8106.3 mg COD/L under 85 mg Fe/g TSS, being 58.6 times that of without Fe (VI) pretreatment. Mechanism exploration reveals that Fe (VI) effectively destroys EPS and cytoderm through electron transfer, reactive oxygen species generation (i.e., OH, O₂^- and ¹O₂) and elevated alkalinity, resulting in the transfer of organics from solid to soluble phase and from macromolecules to intermediates. Generation and transformation of intermediates analyses illustrate that Fe (VI) facilitates hydrolysis, acidification and chain elongation (CE) but suppresses methanogenesis, promoting the targeted conversion of intermediates to MCFAs. Also, Fe (VI) pretreatment provides potential electron shuttles for chain elongation. Microbial community and functional genes encoding key enzymes analysis indicates that Fe (VI) screens key microorganisms and up-regulates functional genes expression involved in CE pathways. Overall, this technology avoids methanogens inhibitor addition and stimulates vivianite synthesis during MCFAs production from WAS.

Enhanced sludge dewaterability by ferrate/ferric chloride: The key role of Fe(IV) on the changes of EPS properties

The complex characteristics of extracellular polymeric substances (EPS) seriously affect the improvement of sludge dewaterability. Ferrate (Fe(VI))/ferric chloride (Fe(III)) was applied through its strong oxidability to effectively enhance sludge dewaterablity by changing the properties of EPS in this study. Results confirmed that water content (WC), specific resistance to filtration (SRF) and capillary suction time (CST) fell from 82.8 %, 9.3 × 10¹⁰ s²/g and 35.1 s to 76.1 %, 2.6 × 10¹⁰ s²/g and 16.2 s, respectively, when adding 12 mg Fe(VI)/g VSS and 12 mg Fe(III)/g VSS with the dosing interval of 5 min. Investigations of the mechanism strongly suggested that Fe(VI) was successfully catalyzed by Fe(III), promoting the generation of methyl phenyl sulfone (PMSO₂) and facilitating the electron transfer, with Fe(IV) having the major role in the oxidation process. Furthermore, sludge water-holding capacity and hydrophilicity waned after oxidation due to the destruction of EPS structure, which promoted the decrement of bound water to enhance the discharge of sludge water, so as to improve the efficiency of dewatering.

Iron scraps packing rapidly enhances nitrogen removal in an aerobic sludge system and the mechanism

Simultaneous nitrification and denitrification (SND) has the advantage of energy saving and carbon demand reduction. Here, readily available low-cost iron scraps packing was added to an aerobic sludge system. This successfully enhanced the efficiency of total nitrogen removal from 37.7 ± 13.2 % to 62.7 ± 7.9 % over 2 days. While electrons from iron biocorrosion did not contribute to nitrate reduction, iron promoted heterotrophic denitrification. The iron scraps changed the spatial distribution of the microbial community, where more denitrification bacteria accumulated around the packing and higher denitrification capacity was noted. Metagenomic analysis of the sludge cultured in the presence of iron scraps for 2 days revealed that, with the exception of the enriched amoA/B/C gene expression, the abundance of other key nitrogen removal genes showed little variation. Furthermore, the structure of the microbial community was unchanged probably due to the relatively short culturing period. However, metatranscriptomic analysis indicated that iron increased the abundance of nitrifying bacteria (i.e. unclassified Nitrosomonas, Nitrosomonas sp. Is79A3 and Nitrospira defluvii) and promoted higher expression of nitrification genes. Notably, iron scraps packing decreased the abundance of the key denitrification bacteria Thauera sp. MZ1T from 52.92 to 7.58 %. The expression of napA/B also decreased, while expression of narG/H/I increased by 9 to 23 fold and a 2 to 3 fold over expression was noted for nirS, norB/C and nosZ in the presence of iron scraps. This suggested that aerobic denitrification was inhibited and anaerobic denitrification was promoted. This study has provided in-depth understanding of the influence of iron on SND to improve the application of iron-supported biological processes.

Improving sludge dewaterability by free nitrous acid and lysozyme pretreatment: Performances and mechanisms

Reducing the water content of waste activated sludge (WAS) is critical for sludge treatment and disposal in wastewater treatment plants (WWTPs). In this study, a new combined conditioning processes by using lysozyme (LZM) and free nitrous acid (FNA) were proposed and demonstrated to enhance the dewaterability of WAS. The water content of sludge cake dropped from 82.82 % to 68.42 % (1 h FNA treatment + 1 h LZM treatment) and 69.52 % (6 h FNA treatment + 1 h LZM treatment) with the combined FNA and LZM treatment; and the corresponding capillary suction time (CST) reduction efficiency increased 49.29 % (1 h FNA treatment + 1 h LZM treatment) and 52.98 % (6 h FNA treatment + 1 h LZM treatment). A comprehensive investigation conducted in this study revealed the underlying mechanism of dewaterability improvement lies in the transformations of extracellular polymeric substances (EPS). The combined conditioning led to enhanced hydrophobicity in the sludge, as suggested by FTIR protein secondary structure and interfacial free energy. The reduced zeta potential and the potential barrier indicated the reduction of the repulsive force of sludge particles and the bound water content in the conditioned floc. The hydrophobicity, flow permeability and flocculability were enhanced after combined treatment, leading to the release of bound water.

Urine pretreatment significantly promotes methane production in anaerobic waste activated sludge digestion

Methane production of waste activated sludge (WAS) in anaerobic digestion is hindered due to the rate-limited hydrolysis process and the low methane potential of WAS. Pretreatment of WAS is a common and appealing strategy to improve methane production in anaerobic digestion. In this study, we proposed to use urine, an easily obtained human waste with high ammonium concentration and pH, as a novel pretreatment strategy for anaerobic WAS digestion. Urine pretreatment at levels of 5-30 % (V_urine/V_urine+WAS) could substantially enhance methane production by 5-35 % in biochemical methane potential (BMP) tests, with the highest methane production of 179.6 ± 3.3 mL/g volatile solids (VS) achieved under the highest level of urine (i.e. 30 % urine addition). Based on the model analysis, the biochemical methane potential (B₀) and hydrolysis rate of WAS (k) rose from 131.9 mL/g VS and 0.19 d^-1 in the control without pretreatment to 136.3-178.2 mL/g VS and 0.22-0.30 d^-1, respectively, after the urine pretreatment (5-30 % addition). Urine pretreatment with 5-30 % addition also improved the degradation extent (Y) of WAS by 3-35 %. The promising results indicate that urine pretreatment in anaerobic digestion is a promising technology to improve the efficiency of anaerobic digestion with environmental and economic benefits.

Triple action of FeCl3-assisted hydrothermal treatment of digested sludge for deep dewatering

In this study, a FeCl₃-assisted hydrothermal treatment (HTT) process under mild conditions (90 °C-130 °C) was developed for deep dewatering of anaerobically digested sludge. HTT of sludge at 90 °C-130 °C with 4%-6% Fe³⁺ ions loading based on total sludge solids followed by mechanical dewatering reduced sludge water content from 82% to 38%-53% and sludge weight by 62%-72%. The treatment increased the flowability of sludge through reduction of apparent viscosity and disintegration of colloidal forces between sludge particles. This study unveiled that FeCl₃-assisted HTT process had three mechanisms for improving sludge dewaterability and flowability. The treatment hydrolysed sludge flocs in the presence of Lewis acid FeCl₃ and high temperature (90-130 °C). Fe³⁺ ions also improved dewaterability through the formation of double electric layers and neutralisation of surface negative charges, leading to flocculation of sludge flocs. More importantly, the hydrolysed sludge components produced during HTT process acted as reducing agents and led to in-situ generation of iron oxyhydroxide nanoparticles through reduction-oxidation reactions, further enhancing flocculation/co-precipitation of sludge flocs. The treatment reduced EPS content and changed conformational structures of EPS proteins by breaking down hydrogen bond-maintaining α-helix which led to a loose EPS protein structure and enhanced hydrophobicity and flocculability. Furthermore, the FeCl₃-assisted treatment promoted immobilisation of the majority of heavy metals in the sludge matrix through co-precipitation/complexation reactions with iron species and organic/inorganic matters. This indicates that the FeCl₃-assisted treatment reduced direct toxicity/bioavailability of the majority of heavy metals and the treated sludge may be suitable for land application. Overall, this study provides new insights into mechanism of FeCl₃-assisted HTT process for dewaterability of anaerobically digested sludge and immobilisation of heavy metals.

A comparison of oxidation and re-flocculation behaviors of Fe2+/PAA and Fe2+/H2O2 treatments for enhancing sludge dewatering: A mechanism study

In this study, Fe²⁺ activated-PAA was developed as a novel technology to enhance sludge dewatering. The result showed that the filterability (CST₀/CST) enhanced by 4.20 ± 0.14 times more than the control, and the SRF and bound water content decreased from 4.58 ± 0.07 × 10¹³ m/kg and 2.11 ± 0.28 g/g dry sludge to 9.47 ± 0.05 × 10¹² m/kg and 1.27 ± 0.18 g/g dry sludge, respectively after the sludge was conditioned by 1.20 mM/g VSS Fe²⁺ and 1.20 mM/g VSS PAA. The dewatering performance, physicochemical properties, aggregation behaviors, and EPS fractions of sludge were compared before and after Fe²⁺/PAA and Fe²⁺/H₂O₂ conditionings. The results showed that Fe²⁺/PAA treatment was more competitive in enhancing dewaterability under neutral and alkaline conditions than Fe²⁺/H₂O₂ treatment but slightly weaker under acid conditions. Besides, it was found that the oxidation and re-flocculation behaviors were different in those two enhanced dewatering technologies due to the difference in the generated ROS. R-O was the primary radical in the Fe²⁺/PAA system, while OH was the major one in the Fe²⁺/H₂O₂ system. The mechanism analysis found that the Fe²⁺/PAA process caused harsher disintegration of sludge flocs, meaning more generation of fine particles. However, it exhibited less effect on reducing the energy barrier between sludge particles. Therefore, the Fe²⁺/PAA treated sludge presented weaker aggregation behaviors. The weaker aggregation was unfavorable for sludge dewatering because the weaker aggregated flocs were more easily fragmented, which hampered the consolidation of sludge cakes and removal of bound water. Moreover, loosely-bound extracellular polymeric substances, particularly tightly-bound extracellular polymeric substances, governed the sludge dewaterability.

Enhancement of sludge dewaterability by electrolysis coupled with peroxymonosulfate oxidation process: Performance, mechanisms and implications

With the rapid increase in waste activated sludge (WAS), it is urgent to develop appropriate dewatering processes to diminish sludge volume and improve disposal efficiency. In this study, an advanced oxidation process using electrolysis coupled with peroxymonosulfate (E/PMS) was applied to improve the dewaterability of WAS. The results indicated that the sludge water content (WC) and capillary suction time (CST) dropped from 98.4 ± 0.2% and 220.1 ± 2.3 s to 70.7 ± 0.8% and 63.0 ± 1.2 s, respectively, under the following conditions: an electrolysis voltage of 20 V, an electrolysis time of 20 min, and 200 mg/g TS PMS. The increase in sludge zeta potential, surface hydrophobicity, and flowability indicated a significant improvement in sludge dewaterability. SO₄^•-, O•H, and O₂1 generated in the E/PMS process were responsible for the improvement of WAS dewaterability. These reactive oxygen species damaged extracellular polymeric substances (EPS), decreased fluorescent EPS components, and transformed the extracellular protein secondary structures by influencing the H-bond actions that maintain the α-helix. The bound water content, and apparent viscosity of WAS were found to be reduced, which was also attributed to an increase in dewatering capacity. Additionally, E/PMS treatment enhanced the degradation of organic matter in sludge and reduced the toxicity of the filtrate as well as the bioavailability of heavy metals. The cost analysis found that the E/PMS process was relatively economical and has great potential for practical application.

PPCPs and heavy metals from hydrothermal sewage sludge-derived biochar: migration in wheat and physiological response

Once the sludge was directly used in the farmland, it will have a negative impact on human health through the food chain because sludge contains pollutants. Sewage sludge pyrolysis into biochar is an effective way to realize sludge harmless and resourceful utilization. This research used hydrothermal carbonization method to convert sludge into sludge biochar (SLBC) to reduce the types and contents of pharmaceuticals and personal care products (PPCPs) and available heavy metals. Furthermore, migration of the residual caffeine (Caf), acetaminophen (Ace), and heavy metals (Cr, Pb, Cu, Zn) released from the SLBC in the wheat was assessed. The results showed that the levels of Caf, Ace, Pb, Cu, and Zn accumulated in the shoots were lower than the limit regulated by Drug and Food Additive Use Standard in China (Caf: 150 mg/kg; Ace: 2.5 ~ 5 mg/kg; Pb: 0.3 mg/kg; Cu: 10 mg/kg; Zn: 20 mg/kg). The migration of Cr from roots to shoots was also significantly controlled by SBLC. SBLC delayed the germination time of wheat seeds with increasing in hydrothermal temperature, the germination rate and root length showed a decreasing trend. Evans blue and O₂^- fluorescence staining of root tips also confirmed this conclusion. When the wheat was exposed to the low temperature and dose of SLBC, the chlorophyll contents and growth of wheat can be significantly increased; the oxidative damage of cell plasma membrane and net photosynthetic rate were reduced. However, 0.8 g/L of SLBC made plants suffer abiotic stress and caused oxidative damage to plants, and decreased membrane system stability. The study provides some parameters for sludge to realize resource utilization in the agricultural system.

Coupling sludge-based biochar and electrolysis for conditioning and dewatering of sewage sludge: Effect of char properties

The addition of sludge-based biochar during electrochemical pretreatment of sewage sludge, as an efficient hybrid technology, is potentially to be applied in sludge deep-dewatering. The chars functioned as conductors, catalysts and skeleton particles could enhance the sludge dewaterability and increase the calorific value of the dewatered sludge cake. However, the effect of synthesis conditions on the char properties and further on the dewatering performance is still unknown. Herein, the sludge-based particle electrodes (SPEs) under three main synthesis conditions, including liquid-solid ratio, pyrolysis temperature and time, were prepared. The sludge-based biochars (i.e., SPE-400, SPE-600, and SPE-800 pyrolyzed under 400, 600 and 800 °C, respectively) were characterized and utilized as three-dimensional electrodes during sludge electrolysis. The increased pyrolysis temperature (within 400-800 °C) resulted in the enrichment of metallic ions and increment of specific surface area and pore volume of SPE, which led to the increased catalysis and adsorption sites for viscous proteins (PNs). Particularly, the pores of SPE-800 provided more drainage channels as skeleton builders. Compared with raw sludge, the capillary suction time (CST) and the specific resistance of filtration (SRF) of the treated sludge with 3D-SPE-800 were reduced by 58.12% and 81.01%, respectively, but the net sludge solids yield (Y_N) was increased by 87.05%. The highest decrease of hydrophilic α-Helix content in PNs (from 9.93% to 7.30%) was observed when using SPE-800 as particle electrode, revealing the crucial role of char characteristics on protein reduction and subsequent dewatering enhancement. The synergistic effects of electrolysis and sludge-based biochar provided a new insight for a closed-loop pretreatment of sewage sludge in the wastewater treatment plant.

Positive feedback on dewaterability of waste-activated sludge by the conditioning process of Fe(II) catalyzing urea hydrogen peroxide

The treatment and disposal of sludge is a complex environmental problem because of the high moisture content. Herein, We reported the process of Fe(II) activating Urea hydrogen peroxide (UHP) to improve waste activated sludge (WAS) dewaterability for the first time. Fe(II)/UHP was proven to significantly improve WAS dewaterability. Specifically, under the optimal conditions with 60/35-Fe(II)/UHP mg/g TSS, the CST, SRF, and WC_SC of WAS reduced from 215.3 ± 7.5s, 9.2 ± 0.32 (× 10¹² m/kg), and 92.2 ± 0.7% (control) to 62.3 ± 4.3s, 2.8 ± 0.09 (× 10¹²m/kg), and 70.4 ± 0.4%, respectively. Further analysis revealed that •OH was generated in the Fe(II)/UHP system and played the dominant role in enhancing WAS dewaterability. •OH was found to attack extracellular polymeric substances (EPSs) and cells, causing EPSs fragmentation and decomposition part of EPSs into micro-molecule organics or even inorganics, and leading to cell destruction, thus liberating the EPSs-bound and cells-bound water. •OH also degraded the protein in centrifugal liquor (CL) into micro-molecule organics such as amino acids, which could reduce the viscosity and electronegativity of CL. The above facts ultimately reduced solid-liquid interface interaction but increased hydrophobicity, flocculation, and flowability of WAS. Meanwhile, the broken WAS flocs were then re-flocculated via adsorption bridging and charge neutralization induced by Fe(II) and Fe(III). Moreover, Fe(II)/UHP treatment achieved the reduction and stabilization of heavy metals of dewatered sludge, which further enabled its land application. Finally, the Fe(II)/UHP process was found to be more attractive than the Fe(II)/persulfate, classical Fenton processes, and cPAM in terms of cost savings and practical implementation.

A Review of Persulfate Activation by Magnetic Catalysts to Degrade Organic Contaminants: Mechanisms and Applications

All kinds of refractory organic pollutants in environmental water pose a serious threat to human health and ecosystems. In recent decades, sulfate radical-based advanced oxidation processes (SR-AOPs) have attracted extensive attention in the removal of these organic pollutants due to their high redox potential and unique selectivity. This review first introduces persulfate activation by magnetic catalysts to degrade organic contaminants. We present the advances and classifications in the generation of sulfate radicals using magnetic catalysts. Subsequently, the degradation mechanisms in magnetic catalysts activated persulfate system are summarized and discussed. After an integrated presentation of magnetic catalysts in SR-AOPs, we discuss the application of persulfate activation by magnetic catalysts in the treatment of wastewater, landfill leachate, biological waste sludge, and soil containing organic pollutants. Finally, the current challenges and perspectives of magnetic catalysts that activated persulfate systems are summarized and put forward.