Influence of hydrodynamic operating conditions on organic fouling of spiral-wound forward osmosis membranes: Fouling-induced performance deterioration in FO-RO hybrid system

Regeneration of dialysis solution by dual-layer hollow fiber mixed matrix membrane (DLHF-MMM) incorporated with amine-functionalized mesoporous silica nanoparticles

A large amount of purified water is used in conventional hemodialysis (HD) for treating end-stage kidney disease (ESKD). To minimize the water demand and waste generation, the regeneration of dialysis solution is considered the most efficient control strategy. In this study, an innovative dual-layer hollow fiber (DLHF) mixed matrix membrane (MMM) incorporated with amine-functionalized mesoporous silica nanoparticles (MPS-NPs) was developed to regenerate spent dialysis solution. The fabricated DLHF-MMM configuration enabled the continuous removal of small, medium, and large weight uremic toxins (UTs) through dual mechanisms. The inner layer composed of polyethersulfone (PES) and polyethylene glycol (PEG) rejected medium-large weight UTs (i.e., MW > 500 Da) via the molecular sieving. Meanwhile, the outer layer containing amine-functionalized MPS-NPs effectively removed small weight UTs, such as urea and creatinine. The DLHF-MMM with 6 wt% of amine-functionalized MPS-NPs demonstrated the most favorable characteristics, i.e., high water permeability (298.6 ± 3.2 mL/m2.h.mmHg) and adsorption capacity of urea (523.5 mg/g) and creatinine (28.1 mg/g). Notably, the optimal membrane (DLHF-4) also achieved favorable removal rates from the spent dialysis solution of actual patient, i.e., urea (74.4 %), creatinine (56 %), hippuric acid (16.1 %), and lysozyme (58.7 %, additionally spiked as a mimicking for β-2 microglobulin). These results indicate that the fabricated DLHF-MMM in this study can effectively overcome the challenges posed by the complex matrix components. Overall, the results of this study demonstrate that the DLHF-MMM incorporated with amine-functionalized MPS-NPs is a promising and potential tool for the regeneration of dialysis solution. Furthermore, this approach can contribute to water conservation and reduce the burden on wastewater treatment processes associated with wastewater generated from conventional HD.

Resilient forward osmosis membranes against microplastics fouling enhanced by MWCNTs/UiO-66-NH2 hybrid nanoparticles

The escalating presence of microplastics (MPs) in wastewater necessitates the investigation of effective tertiary treatment process. Forward osmosis (FO) emerges as an effective non-pressurized membrane process, however, for the effective implementation of FO systems, the development of fouling-resistance FO membranes with high-performance is essential. This study focuses on the integration of MWCNT/UiO-66-NH2 as metal-organic frameworks (MOFs) and multi-wall carbon nanotubes (MWCNT) nanocomposites in thin film composite (TFC) FO membranes, harnessing the synergistic power of hybrid nanoparticles in FO membranes. The results showed that the addition of MWCNT/UiO-66-NH2 in the aqueous phase during polyamide formation changed the polyamide surface structure, and enhanced membranes' hydrophilicity by 44%. The water flux of the modified FO membrane incorporated with 0.1 wt% MWCNTs/UiO-66-NH2 increased by 67% and the reverse salt flux decreased by 22% as in comparison with the control membrane. Moreover, the modified membrane showed improved antifouling behavior against both organic foulant and MPs. The MWCNT/UiO-66-NH2 membrane experienced 35% flux decline while the control membrane experienced 65% flux decline. This proves that the integration of MWCNT/UiO-66-NH2 nanoparticles into TFC FO membranes is a viable approach in creating advanced FO membranes with high antifouling propensity with potential to be expanded further to other membrane applications.

Recent advances in surface tailoring of thin film forward osmosis membranes: A review

The recent advancements in fabricating forward osmosis (FO) membranes have shown promising results in desalination and water treatment. Different methods have been applied to improve FO performance, such as using mixed or new draw solutions, enhancing the recovery of draw solutions, membrane modification, and developing FO-hybrid systems. However, reliable methods to address the current issues, including reverse salt flux, fouling, and antibacterial activities, are still in progress. In recent decades, surface modification has been applied to different membrane processes, including FO membranes. Introducing nanochannels, bioparticles, new monomers, and hydrophilic-based materials to the surface layer of FO membranes has significantly impacted their performance and efficiency and resulted in better control over fouling and concentration polarization (CP) in these membranes. This review critically investigates the recent developments in FO membrane processes and fabrication techniques for FO surface-layer modification. In addition, this study focuses on the latest materials and structures used for the surface modification of FO membranes. Finally, the current challenges, gaps, and suggestions for future studies in this field have been discussed in detail.

Electrodialysis membrane desalination with diagonal membrane spacers: a review

Electrodialysis desalination uses ion exchange membranes, membrane spacers, and conductors to remove salt from water. Membrane spacers, made of polymeric strands, reduce concentration polarization. These spacers have properties such as porosity and filament shape that affect their performance. One important property is the spacer-bulk attack angle. This study systematically reviews the characteristics of a 45° attack angle of spacers and its effects on concentration polarization and fluid dynamics. Membrane spacers in a channel create distinct flow fields and concentration profiles. When set at a 45° attack angle, spacers provide greater turbulence and mass-heat transfer than traditional spacers. This is because both the transverse and longitudinal filaments become diagonal in relation to the bulk flow direction. A lower attack angle (<45°) results in a lower pressure drop coupled with a decline in wakes and stream disruption because when the filaments are more parallel to the primary fluid direction, the poorer their affect. This research concludes that membrane spacers with a 45° spacer-bulk attack angle function optimally compared to other angles.

Forward Osmosis Membrane: Review of Fabrication, Modification, Challenges and Potential

Forward osmosis (FO) is a low-energy treatment process driven by osmosis to induce the separation of water from dissolved solutes/foulants through the membrane in hydraulic pressure absence while retaining all of these materials on the other side. All these advantages make it an alternative process to reduce the disadvantages of traditional desalination processes. However, several critical fundamentals still require more attention for understanding them, most notably the synthesis of novel membranes that offer a support layer with high flux and an active layer with high water permeability and solute rejection from both solutions at the same time, and a novel draw solution which provides low solute flux, high water flux, and easy regeneration. This work reviews the fundamentals controlling the FO process performance such as the role of the active layer and substrate and advances in the modification of FO membranes utilizing nanomaterials. Then, other aspects that affect the performance of FO are further summarized, including types of draw solutions and the role of operating conditions. Finally, challenges associated with the FO process, such as concentration polarization (CP), membrane fouling, and reverse solute diffusion (RSD) were analyzed by defining their causes and how to mitigate them. Moreover, factors affecting the energy consumption of the FO system were discussed and compared with reverse osmosis (RO). This review will provide in-depth details about FO technology, the issues it faces, and potential solutions to those issues to help the scientific researcher facilitate a full understanding of FO technology.

Existing Filtration Treatment on Drinking Water Process and Concerns Issues

Water is one of the main sources of life's survival. It is mandatory to have good-quality water, especially for drinking. Many types of available filtration treatment can produce high-quality drinking water. As a result, it is intriguing to determine which treatment is the best. This paper provides a review of available filtration technology specifically for drinking water treatment, including both conventional and advanced treatments, while focusing on membrane filtration treatment. This review covers the concerns that usually exist in membrane filtration treatment, namely membrane fouling. Here, the parameters that influence fouling are identified. This paper also discusses the different ways to handle fouling, either based on prevention, prediction, or control automation. According to the findings, the most common treatment for fouling was prevention. However, this treatment required the use of chemical agents, which will eventually affect human health. The prediction process was usually used to circumvent the process of fouling development. Based on our reviews up to now, there are a limited number of researchers who study membrane fouling control based on automation. Frequently, the treatment method and control strategy are determined individually.

Assessment of Forward Osmosis in PRO Mode during Desalination of a Local Oil Refinery Effluent

In this study, the performance of a forward osmosis system was assessed over a 30-h period during desalination of a local oil refinery effluent using NaCl as the draw solute. The study was conducted with the active layer of the membrane facing the draw solution. Assessment was done based on the water flux, salt rejection (SO₄²⁻ and CO₃²⁻), membrane fouling and fouling reversal after membrane cleaning. Critical to this study was the performance of manual scrubbing of the membrane after each run and the application of chemically enhanced osmotic backwash. Scanning electron microscope (SEM) analysis of the cellulose triacetate (CTA) membrane was conducted before and after cleaning to ascertain the degree of fouling and fouling reversal after membrane cleaning. The results showed an average water flux of 3.78 ± 0.13 L/m² h, reverse solute flux (RSF) of 1.56 ± 0.11 g/m²·h, SO₄²⁻ rejection of 100%, CO₃²⁻ rejection of 95.66 ± 0.32% and flux recovery of 95% after membrane cleaning. This study identifies that intermittent manual scrubbing of the membrane plays a major role in overall membrane performance. It also provides a practical basis for further research and decision making in the use of FO and CTA membranes for oil refinery effluent desalination.

Corn Stalk-Derived Carbon Quantum Dots with Abundant Amino Groups as a Selective-Layer Modifier for Enhancing Chlorine Resistance of Membranes

Low permeability and chlorine resistance of normal thin-film composite (TFC) membranes restrict their practical applications in many fields. This study reports the preparation of a high chlorine-resistant TFC membrane for forward osmosis (FO) by incorporating corn stalk-derived N-doped carbon quantum dots (N-CQDs) into the selective polyamide (PA) layer to construct a polydopamine (PDA) sub-layer (PTFC_CQD). Membrane modification is characterized by surface morphology, hydrophilicity, Zeta potential, and roughness. Results show that TFC_CQD (without PDA pretreatment) and PTFC_CQD membranes possess greater negative surface charges and thinner layer-thickness (less than 68 nm). With N-CQDs and PDA pretreatment, the surface roughness of the PTFC_CQD membrane decreases significantly with the co-existence of microsized balls and flocs with a dense porous structure. With the variation of concentration and type of draw solution, the PTFC_CQD membrane exhibits an excellent permeability with low J_{(reverse salt flux)}/J_{(water flux)} values (0.1-0.25) due to the enhancement of surface hydrophilicity and the shortening of permeable paths. With 16,000 ppm·h chlorination, reverse salt flux of the PTFC_CQD membrane (8.4 g m^-2 h^-1) is far lower than those of TFC_CQD (136.2 g m^-2 h^-1), PTFC (127.6 g m^-2 h^-1), and TFC (132 g m^-2 h^-1) membranes in FO processes. The decline of salt rejection of the PTFC_CQD membrane is only 8.2%, and the normalized salt rejection maintains 0.918 in the RO system (16,000 ppm·h chlorination). Super salt rejection is ascribed to the existence of abundant N-H bonds (N-CQDs), which are preferentially chlorinated by free chlorine to reduce the corrosion of the PA layer. The structure of the PA layer is stable during chlorination also due to the existence of various active groups grafted on the surface. This study may pave a new direction for the preparation of durable biomass-derivative (N-CQD)-modified membranes to satisfy much more possible applications.

Biofouling Mitigation Approaches during Water Recovery from Fermented Broth via Forward Osmosis

Forward Osmosis (FO) is a promising technology that can offer sustainable solutions in the biorefinery wastewater and desalination fields, via low energy water recovery. However, microbial biomass and organic matter accumulation on membrane surfaces can hinder the water recovery and potentially lead to total membrane blockage. Biofouling development is a rather complex process and can be affected by several factors such as nutrient availability, chemical composition of the solutions, and hydrodynamic conditions. Therefore, operational parameters like cross-flow velocity and pH of the filtration solution have been proposed as effective biofouling mitigation strategies. Nevertheless, most of the studies have been conducted with the use of rather simple solutions. As a result, biofouling mitigation practices based on such studies might not be as effective when applying complex industrial mixtures. In the present study, the effect of cross-flow velocity, pH, and cell concentration of the feed solution was investigated, with the use of complex solutions during FO separation. Specifically, fermentation effluent and crude glycerol were used as a feed and draw solution, respectively, with the purpose of recirculating water by using FO alone. The effect of the abovementioned parameters on (i) ATP accumulation, (ii) organic foulant deposition, (iii) total water recovery, (iv) reverse glycerol flux, and (v) process butanol rejection has been studied. The main findings of the present study suggest that significant reduction of biofouling can be achieved as a combined effect of high-cross flow velocity and low feed solution pH. Furthermore, cell removal from the feed solution prior filtration may further assist the reduction of membrane blockage. These results may shed light on the challenging, but promising field of FO process dealing with complex industrial solutions.